summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-04KVM: nVMX: do not leak PML full vmexit to L1Ladi Prosek
The PML feature is not exposed to guests so we should not be forwarding the vmexit either. This commit fixes BSOD 0x20001 (HYPERVISOR_ERROR) when running Hyper-V enabled Windows Server 2016 in L1 on hardware that supports PML. Fixes: 843e4330573c ("KVM: VMX: Add PML support in VMX") Signed-off-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-04-04drm: rcar-du: Add HDMI outputs to R8A7795 device descriptionKoji Matsuoka
Update the device description with the two available HDMI outputs. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Add DPLL supportKoji Matsuoka
The implementation hardcodes a workaround for the H3 ES1.x SoC regardless of the SoC revision, as the workaround can be safely applied on all devices in the Gen3 family without any side effect. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Skip disabled outputsLaurent Pinchart
When a DT node connected to a DU output is disabled no bridge will ever be instantiated for it. Skip the output in that case. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Add Gen3 HDMI encoder supportKoji Matsuoka
The R-Car Gen3 SoCs include on-chip DesignWare HDMI encoders. Support them with a platform driver to provide platform glue data to the dw-hdmi driver. The driver is a complete rewrite of code coming from the Renesas BSP, save for the values in the PHY parameters table. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2017-04-04dt-bindings: display: renesas: Add R-Car Gen3 HDMI TX DT bindingsLaurent Pinchart
The Renesas R-Car Gen3 SoCs use a Synopsys DWC HDMI TX encoder IP. Add corresponding device tree bindings based on the DWC HDMI TX bindings model. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Rob Herring <robh@kernel.org>
2017-04-04drm: rcar-du: Hardcode encoders types to DRM_MODE_ENCODER_NONELaurent Pinchart
Unlike the connector type, the encoder type is unused by userspace. As it is equally unused in the driver, except in a single location where the connector type can be used instead, hardcode it to DRM_MODE_ENCODER_NONE. This allow removing all code that tries to determine (unsuccessfully in case a bridge is used) the encoder type. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Replace manual bridge implementation with DRM bridgeLaurent Pinchart
The rcar-du driver contains a manual implementation of HDMI and VGA bridges. Use DRM bridges to replace it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Add support for LVDS mode selectionLaurent Pinchart
Retrieve the LVDS mode from the panel and configure the LVDS encoder accordingly. LVDS mode selection is static as LVDS panels can't be hot-plugged on any of the device supported by the driver. Support for dynamic mode selection can be implemented in the future when needed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Use the DRM panel APILaurent Pinchart
Instead of parsing the panel device tree node manually, use the panel API to delegate panel handling to a panel driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Document the vsps property in the DT bindingsLaurent Pinchart
The property is used by the driver but is missing from the DT bindings. Document it. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Remove wait field from rcar_du_device structureLaurent Pinchart
The field is a left-over from the switch to the atomic commit helper. It's unused, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Make sure the VSP is initialized on platforms that need itJacopo Mondi
On Gen3 platforms planes are managed by the external VSP compositor on behalf of DRM/KMS. If VSP compositor support is not enabled in the DU driver, the VSP initialization stub routine is called. Return an error from that stub to fail explicitly, otherwise the device won't be usable and the driver will crash. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [Clarified commit message] Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Use DRM core's atomic commit helperLaurent Pinchart
The DRM core atomic helper now supports asynchronous commits natively. The custom rcar-du implementation isn't needed anymore, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Clear handled event pointer in CRTC stateLaurent Pinchart
The atomic commit helper requires drivers to clear the event pointer stored in the CRTC state when the event is handled. In preparation to using the helper, fix the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Handle event when disabling CRTCsLaurent Pinchart
The driver currently handles vblank events only when updating planes on a CRTC. The atomic update API however allows requesting an event when disabling a CRTC. This currently leads to event objects being leaked in the kernel and to events not being sent out. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: rcar-du: Don't open code of_device_get_match_data()Wolfram Sang
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-04drm: rcar-du: Switch to encoder .atomic_mode_set() helper functionLaurent Pinchart
The native encoder mode set helper function for atomic drivers is .atomic_mode_set(). Replace the legacy .mode_set() implementation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: panels: Add LVDS panel driverLaurent Pinchart
This driver supports LVDS panels that don't require device-specific handling of power supplies or control signals. It implements automatic backlight handling if the panel is attached to a backlight controller. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04drm: Add data transmission order bus flagLaurent Pinchart
The flags indicate whether data is transmitted LSB to MSB or MSB to LSB on the bus. The exact meaning is bus-type dependent. For instance, for LVDS buses the flags indicate whether the seven data bits transmitted in a clock pulse are sent in normal order (MSB to LSB, slots 0 to 6) or reverse order (LSB to MSB, slots 6 to 0). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2017-04-04devicetree/bindings: display: Add bindings for two Mitsubishi panelsLaurent Pinchart
The AA104XD12 and AA121TD01 are LVDS display panels. Their bindings are modelled on the the LVDS panel bindings. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Rob Herring <robh@kernel.org>
2017-04-04devicetree/bindings: display: Add bindings for LVDS panelsLaurent Pinchart
LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple incompatible data link layers have been used over time to transmit image data to LVDS panels. This binding supports display panels compatible with the JEIDA-59-1999, Open-LDI and VESA SWPG specifications. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Rob Herring <robh@kernel.org>
2017-04-04devicetree/bindings: display: Document common panel propertiesLaurent Pinchart
Document properties common to several display panels in a central location that can be referenced by the panel device tree bindings. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Rob Herring <robh@kernel.org>
2017-04-04PCI: dwc: Fix dw_pcie_ops NULL pointer dereferenceNiklas Cassel
Fix a crash from dereferencing a NULL dw_pcie_ops pointer. For example, on ARTPEC-6: Unable to handle kernel NULL pointer dereference at virtual address 00000004 pgd = c0204000 [00000004] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc3-next-20170321 #1 Hardware name: Axis ARTPEC-6 Platform task: db098000 task.stack: db096000 PC is at dw_pcie_writel_dbi+0x2c/0xd0 Prior to 442ec4c04d12 ("PCI: dwc: all: Split struct pcie_port into host-only and core structures"), every driver had a struct pcie_host_ops with function pointers, typically used as: if (pp->ops->readl_rc) return pp->ops->readl_rc(...); 442ec4c04d12 split struct pcie_host_ops into two pieces: struct dw_pcie_host_ops and struct dw_pcie_ops, so the above became: if (pci->ops->readl_dbi) return pci->ops->readl_dbi(...); But pcie-artpec6.c and pcie-designware-plat.c don't need the dw_pcie_ops pointers and didn't supply a pci->ops struct, which leads to NULL pointer dereferences. Supply an empty struct dw_pcie_ops to avoid the NULL pointer dereferences. [bhelgaas: changelog] Fixes: 442ec4c04d12 ("PCI: dwc: all: Split struct pcie_port into host-only and core structures") Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Joao Pinto <jpinto@synopsys.com>
2017-04-04powerpc: Don't try to fix up misaligned load-with-reservation instructionsPaul Mackerras
In the past, there was only one load-with-reservation instruction, lwarx, and if a program attempted a lwarx on a misaligned address, it would take an alignment interrupt and the kernel handler would emulate it as though it was lwzx, which was not really correct, but benign since it is loading the right amount of data, and the lwarx should be paired with a stwcx. to the same address, which would also cause an alignment interrupt which would result in a SIGBUS being delivered to the process. We now have 5 different sizes of load-with-reservation instruction. Of those, lharx and ldarx cause an immediate SIGBUS by luck since their entries in aligninfo[] overlap instructions which were not fixed up, but lqarx overlaps with lhz and will be emulated as such. lbarx can never generate an alignment interrupt since it only operates on 1 byte. To straighten this out and fix the lqarx case, this adds code to detect the l[hwdq]arx instructions and return without fixing them up, resulting in a SIGBUS being delivered to the process. Cc: stable@vger.kernel.org Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-04Merge tag 'kvm-s390-master-4.11-1' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux From: Christian Borntraeger <borntraeger@de.ibm.com> KVM: s390: Fix instruction-execution-protection/change-recording override This is a fix that prevents translation exception errors on valid page tables for the instruction-exection-protection support. This feature was added during the 4.11 merge window. We have to remove an old check that would trigger if the change-recording override is not available (e.g. edat1 disabled via cpu model).
2017-04-04KVM: arm/arm64: vgic: Fix GICC_PMR uaccess on GICv3 and clarify ABIChristoffer Dall
As an oversight, for GICv2, we accidentally export the GICC_PMR register in the format of the GICH_VMCR.VMPriMask field in the lower 5 bits of a word, meaning that userspace must always use the lower 5 bits to communicate with the KVM device and must shift the value left by 3 places to obtain the actual priority mask level. Since GICv3 supports the full 8 bits of priority masking in the ICH_VMCR, we have to fix the value we export when emulating a GICv2 on top of a hardware GICv3 and exporting the emulated GICv2 state to userspace. Take the chance to clarify this aspect of the ABI. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-04-04KVM: arm64: Ensure LRs are clear when they should beChristoffer Dall
We currently have some code to clear the list registers on GICv3, but we never call this code, because the caller got nuked when removing the old vgic. We also used to have a similar GICv2 part, but that got lost in the process too. Let's reintroduce the logic for GICv2 and call the logic when we initialize the use of hypervisors on the CPU, for example when first loading KVM or when exiting a low power state. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-04kvm: arm/arm64: Fix locking for kvm_free_stage2_pgdSuzuki K Poulose
In kvm_free_stage2_pgd() we don't hold the kvm->mmu_lock while calling unmap_stage2_range() on the entire memory range for the guest. This could cause problems with other callers (e.g, munmap on a memslot) trying to unmap a range. And since we have to unmap the entire Guest memory range holding a spinlock, make sure we yield the lock if necessary, after we unmap each PUD range. Fixes: commit d5d8184d35c9 ("KVM: ARM: Memory virtualization setup") Cc: stable@vger.kernel.org # v3.10+ Cc: Paolo Bonzini <pbonzin@redhat.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> [ Avoid vCPU starvation and lockup detector warnings ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-04-04arm64: mm: unaligned access by user-land should be received as SIGBUSVictor Kamensky
After 52d7523 (arm64: mm: allow the kernel to handle alignment faults on user accesses) commit user-land accesses that produce unaligned exceptions like in case of aarch32 ldm/stm/ldrd/strd instructions operating on unaligned memory received by user-land as SIGSEGV. It is wrong, it should be reported as SIGBUS as it was before 52d7523 commit. Changed do_bad_area function to take signal and code parameters out of esr value using fault_info table, so in case of do_alignment_fault fault user-land will receive SIGBUS. Wrapped access to fault_info table into esr_to_fault_info function. Cc: <stable@vger.kernel.org> Fixes: 52d7523 (arm64: mm: allow the kernel to handle alignment faults on user accesses) Signed-off-by: Victor Kamensky <kamensky@cisco.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-04-04irq/affinity: Fix CPU spread for unbalanced nodesKeith Busch
The irq_create_affinity_masks routine is responsible for assigning a number of interrupt vectors to CPUs. The optimal assignemnet will spread requested vectors to all CPUs, with the fewest CPUs sharing a vector. The algorithm may fail to assign some vectors to any CPUs if a node's CPU count is lower than the average number of vectors per node. These vectors are unusable and create an un-optimal spread. Recalculate the number of vectors to assign at each node iteration by using the remaining number of vectors and nodes to be assigned, not exceeding the number of CPUs in that node. This will guarantee that every CPU is assigned at least one vector. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: linux-nvme@lists.infradead.org Link: http://lkml.kernel.org/r/1491247553-7603-1-git-send-email-keith.busch@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-04-04drm/imx: merge imx-drm-core and ipuv3-crtc in one moduleLucas Stach
While it is possible to hook other CRTC implementations into imx-drm in practice there are none yet and the option to disable ipuv3-crtc support has been hidden for a long time. Now that the imx-drm-core has learned to deal with some of the specifics of IPUv3 there is a cyclic dependency between both parts. To get rid of this and to decimate the Kconfig maze a bit, simply merge both parts into one module. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-04-04gpu: ipu-v3: don't depend on DRM being enabledLucas Stach
The PRE/PRG drivers, which need the DRM infrastructure, are only used from the output path, so we skip building them into the ipu-v3 driver if CONFIG_DRM is not enabled. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-04-04drm: virtio: fix virtio_gpu_mode_dumb_createGerd Hoffmann
Lookup format using virtio_gpu_translate_format() instead of hardcoding it. Fixes xorg display on bigendian guests (i.e. ppc64). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Laurent Vivier <lvivier@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170403070845.10793-3-kraxel@redhat.com
2017-04-04drm: virtio: add virtio_gpu_translate_formatGerd Hoffmann
Factors out code, no functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Laurent Vivier <lvivier@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170403070845.10793-2-kraxel@redhat.com
2017-04-04MAINTAINERS: meson-drm: remove useless git repositoryNeil Armstrong
Meson DRM is switching to drm-misc, so remove the freedesktop drm/meson-drm git repository from MAINTAINERS entry. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491292894-9190-1-git-send-email-narmstrong@baylibre.com
2017-04-03tcp: minimize false-positives on TCP/GRO checkMarcelo Ricardo Leitner
Markus Trippelsdorf reported that after commit dcb17d22e1c2 ("tcp: warn on bogus MSS and try to amend it") the kernel started logging the warning for a NIC driver that doesn't even support GRO. It was diagnosed that it was possibly caused on connections that were using TCP Timestamps but some packets lacked the Timestamps option. As we reduce rcv_mss when timestamps are used, the lack of them would cause the packets to be bigger than expected, although this is a valid case. As this warning is more as a hint, getting a clean-cut on the threshold is probably not worth the execution time spent on it. This patch thus alleviates the false-positives with 2 quick checks: by accounting for the entire TCP option space and also checking against the interface MTU if it's available. These changes, specially the MTU one, might mask some real positives, though if they are really happening, it's possible that sooner or later it will be triggered anyway. Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03Merge tag 'xtensa-20170403' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull Xtensa fixes from Max Filippov: - make __pa work with uncached KSEG addresses, it fixes DMA memory mmapping and DMA debug - fix torn stack dump output - wire up statx syscall * tag 'xtensa-20170403' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: wire up statx system call xtensa: fix stack dump output xtensa: make __pa work with uncached KSEG addresses
2017-04-04Merge branch 'msm-fixes-4.11-rc6' of ↵Dave Airlie
git://people.freedesktop.org/~robclark/linux into drm-fixes misc msm fixes. * 'msm-fixes-4.11-rc6' of git://people.freedesktop.org/~robclark/linux: drm/msm: Make sure to detach the MMU during GPU cleanup drm/msm/hdmi: redefinitions of macros not required drm/msm/mdp5: Update SSPP_MAX value drm/msm/dsi: Fix bug in dsi_mgr_phy_enable drm/msm: Don't allow zero sized buffer objects drm/msm: Fix wrong pointer check in a5xx_destroy drm/msm: adreno: fix build error without debugfs
2017-04-03sctp: check for dst and pathmtu update in sctp_packet_configXin Long
This patch is to move sctp_transport_dst_check into sctp_packet_config from sctp_packet_transmit and add pathmtu check in sctp_packet_config. With this fix, sctp can update dst or pathmtu before appending chunks, which can void dropping packets in sctp_packet_transmit when dst is obsolete or dst's mtu is changed. This patch is also to improve some other codes in sctp_packet_config. It updates packet max_size with gso_max_size, checks for dst and pathmtu, and appends ecne chunk only when packet is empty and asoc is not NULL. It makes sctp flush work better, as we only need to set up them once for one flush schedule. It's also safe, since asoc is NULL only when the packet is created by sctp_ootb_pkt_new in which it just gets the new dst, no need to do more things for it other than set packet with transport's pathmtu. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03flow dissector: correct size of storage for ARPSimon Horman
The last argument to __skb_header_pointer() should be a buffer large enough to store struct arphdr. This can be a pointer to a struct arphdr structure. The code was previously using a pointer to a pointer to struct arphdr. By my counting the storage available both before and after is 8 bytes on x86_64. Fixes: 55733350e5e8 ("flow disector: ARP support") Reported-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03PCI: dwc: Select PCI_HOST_COMMON for hisiArnd Bergmann
Without PCI_HOST_COMMON support enabled, we get a link error: drivers/pci/dwc/built-in.o: In function `hisi_pcie_map_bus': pcie-hisi.c:(.text+0x8860): undefined reference to `pci_ecam_map_bus' drivers/pci/dwc/built-in.o: In function `hisi_pcie_almost_ecam_probe': pcie-hisi.c:(.text+0x88b4): undefined reference to `pci_host_common_probe' Add an explicit 'select', as the other users have. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jingoohan1@gmail.com>
2017-04-03PCI: thunder-pem: Fix legacy firmware PEM-specific resourcesTomasz Nowicki
SZ_16M PEM resource size includes PEM-specific register and its children resources. Reservation of the whole SZ_16M range leads to child device driver failure when pcieport driver is requesting resources: pcieport 0004:1f:00.0: can't enable device: BAR 0 [mem 0x87e0c0f00000-0x87e0c0ffffff 64bit] not claimed So we cannot reserve full 16M here and instead we want to reserve PEM-specific register only which is SZ_64K. At the end increase PEM resource to SZ_16M since this is what thunder_pem_init() call expects for proper initialization. Fixes: 9abb27c7594a ("PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller") Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.10+
2017-04-03drm/msm: Make sure to detach the MMU during GPU cleanupJordan Crouse
We should be detaching the MMU before destroying the address space. To do this cleanly, the detach has to happen in adreno_gpu_cleanup() because it needs access to structs in adreno_gpu.c. Plus it is better symmetry to have the attach and detach at the same code level. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-04-03drm/msm/hdmi: redefinitions of macros not requiredVinay Simha BN
4 macros already defined in hdmi.h, which is not required to redefine in hdmi_audio.c Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-04-03drm/msm/mdp5: Update SSPP_MAX valueArchit Taneja
'SSPP_MAX + 1' is the max number of hwpipes that can be present on a MDP5 platform. Recently, 2 new cursor hwpipes were added, which caused overflows in arrays that used SSPP_MAX to represent the number of elements. Update the SSPP_MAX value to incorporate the extra hwpipes. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-04-03drm/msm/dsi: Fix bug in dsi_mgr_phy_enableArchit Taneja
A recent commit introduces a bug in dsi_mgr_phy_enable. In the non dual DSI mode, we reset the mdsi (master DSI) PHY. This isn't right since master and slave DSI exist only in dual DSI mode. For the normal mode of operation, we should simply reset the PHY of the DSI device (i.e. msm_dsi) corresponding to the current bridge. Usage of the wrong DSI pointer also resulted in a static checker warning. That too is resolved with this fix. Fixes: b62aa70a98c5 (drm/msm/dsi: Move PHY operations out of host) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-04-03drm/msm: Don't allow zero sized buffer objectsJordan Crouse
Zero sized buffer objects tend to make various bits of the GEM infrastructure complain: WARNING: CPU: 1 PID: 2323 at drivers/gpu/drm/drm_mm.c:389 drm_mm_insert_node_generic+0x258/0x2f0 Modules linked in: CPU: 1 PID: 2323 Comm: drm-api-test Tainted: G W 4.9.0-rc4-00906-g693af44 #213 Hardware name: Qualcomm Technologies, Inc. DB820c (DT) task: ffff8000d7353400 task.stack: ffff8000d7720000 PC is at drm_mm_insert_node_generic+0x258/0x2f0 LR is at drm_vma_offset_add+0x4c/0x70 Zero sized buffers serve no appreciable value to the user so disallow them at create time. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-04-03drm/msm: Fix wrong pointer check in a5xx_destroyJordan Crouse
Instead of checking for a5xx_gpu->gpmu_iova during destroy we accidently check a5xx_gpu->gpmu_bo. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-04-03drm/msm: adreno: fix build error without debugfsArnd Bergmann
The newly added a5xx support fails to build when debugfs is diabled: drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:4: error: 'struct msm_gpu_funcs' has no member named 'show' drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:11: error: 'a5xx_show' undeclared here (not in a function); did you mean 'a5xx_irq'? This adds a missing #ifdef. Fixes: b5f103ab98c7 ("drm/msm: gpu: Add A5XX target support") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-19 07:53:15 +0000