summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-23serial:bfin_uart: Put TX IRQ in individual platform resource.Sonic Zhang
Serial TX IRQ is not RX IRQ plus 1 in some blackfin chips. Give individual platform resources to both TX and RX irqs. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23tty: clearify structure initializer in notify_write()Mathias Krause
Even though this is valid C we should not mix C99 initializers with obfuscated ANSI C. Stick to C99 and initialize c by its name. Found by clang: drivers/tty/vt/vt.c:262:55: warning: explicitly assigning a variable of type 'unsigned int' to itself [-Wself-assign] struct vt_notifier_param param = { .vc = vc, unicode = unicode }; ~~~~~~~ ^ ~~~~~~~ Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23serial:blackfin: rename Blackfin serial driver to bfin_uart.cSonic Zhang
bfin_5xx.c is not a general name for all Blackfin chips. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23serial:blackfin: Correct coding style in bfin serial driver.Sonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23TTY: mxser+cyclades remove wait_until_sent debug codeJiri Slaby
It makes the code really ugly. And since it can be enabled only before building and only in the source files, it can be barely used by users. That said, I've not seen anybody to use it in the past few years. This crap is copied to some more drivers over the tty tree. Since I'm not their maintainer, I'm not sure if I should remove them too? Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23TTY: remove tty_lockedJiri Slaby
We used it really only serial and ami_serial. The rest of the callsites were BUG/WARN_ONs to check if BTM is held. Now that we pruned tty_locked from both of the real users, we can get rid of tty_lock along with __big_tty_mutex_owner. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23TTY: ami_serial, remove BTM from wait_until_sentJiri Slaby
The same as in "TTY: serial, remove BTM from wait_until_sent" we don't need to take BTM in wait_until_sent of ami_serial. Exactly the same as serial, ami_serial accesses some "info" members (xmit_fifo_size, timeout), but their assignment on other places in the code is not protected by BTM anyway. So the BTM protects nothing here. This removal helps us to get rid of tty_locked() and __big_tty_mutex_owner in the following patch. This was suggested by Arnd. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@linux.intel.com> Cc: Andreas Bombe <aeb@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23TTY: serial, remove tasklet for tty_wakeupJiri Slaby
tty_wakeup can be called from any context. So there is no need to have an extra tasklet for calling that. Hence save some space and remove the tasklet completely. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23TTY: msm_serial, remove unneeded console setJiri Slaby
It doesn't make sense to set console to uart_port in console->setup. At that time the console is set by uart_add_one_port already. The call chain looked like: uart_add_one_port() uport->cons = drv->cons; <= once uart_configure_port() register_console() console->setup() port->cons = co; <= second time Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23TTY: serial, remove BTM from wait_until_sentJiri Slaby
During the BKL removal process, the BKL was switched to tty_lock (BTM). Now we should start pruning the BTM further. Let's start with wait_until_sent of the serial layer. This will allow us to switch to the tty port helpers and thus clean it up much. In wait_until_sent there are some uport members accessed, but neither of them is protected by BTM at the location they are set ('=>' means function call): * uport->fifosize (set in tty_ioctl => uart_ioctl => uart_set_info) * uport->type (set in add_one_port prior to tty_register_device) * uport->timeout (set usually in tty_ioctl => tty_mode_ioctl => tty_set_termios => uart_set_termios => uart_change_speed => uport->ops->set_termios => uart_update_timeout) * call to uport->ops->tx_empty() If the tx_empty hook needs some lock to protect accesses to registers, it should take &uport->lock spinlock like 8250 does. Otherwise there still might be races e.g. with ISRs. This should also fix the issue Andreas is seeing (BTM in comparison to BKL doesn't have any hidden functionality like unlocking during sleeping). Signed-off-by: Jiri Slaby <jslaby@suse.cz> References: https://lkml.org/lkml/2011/5/25/562 Cc: Alan Cox <alan@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Andreas Bombe <aeb@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23drivers/tty/synclink: remove double commentEdwin van Vliet
Redundant comment line was removed Signed-off-by: Edwin van Vliet <edwin@cheatah.nl> Reviewed-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driverTimur Tabi
The ePAPR embedded hypervisor specification provides an API for "byte channels", which are serial-like virtual devices for sending and receiving streams of bytes. This driver provides Linux kernel support for byte channels via three distinct interfaces: 1) An early-console (udbg) driver. This provides early console output through a byte channel. The byte channel handle must be specified in a Kconfig option. 2) A normal console driver. Output is sent to the byte channel designated for stdout in the device tree. The console driver is for handling kernel printk calls. 3) A tty driver, which is used to handle user-space input and output. The byte channel used for the console is designated as the default tty. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22Linux 3.1-rc3v3.1-rc3Linus Torvalds
2011-08-22Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Add group event scheduling option to perf record/stat MAINTAINERS: Fix list of perf events source files perf tools: Fix build against newer glibc perf tools: Fix error handling of unknown events perf evlist: Fix missing event name init for default event perf list: Fix exit value
2011-08-22Merge branch 'stable/bug.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/tracing: Fix tracing config option properly xen: Do not enable PV IPIs when vector callback not present xen/x86: replace order-based range checking of M2P table by linear one xen: xen-selfballoon.c needs more header files
2011-08-22xen/tracing: Fix tracing config option properlyJeremy Fitzhardinge
Steven Rostedt says we should use CONFIG_EVENT_TRACING. Cc:Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22xen: Do not enable PV IPIs when vector callback not presentStefano Stabellini
Fix regression for HVM case on older (<4.1.1) hypervisors caused by commit 99bbb3a84a99cd04ab16b998b20f01a72cfa9f4f Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Thu Dec 2 17:55:10 2010 +0000 xen: PV on HVM: support PV spinlocks and IPIs This change replaced the SMP operations with event based handlers without taking into account that this only works when the hypervisor supports callback vectors. This causes unexplainable hangs early on boot for HVM guests with more than one CPU. BugLink: http://bugs.launchpad.net/bugs/791850 CC: stable@kernel.org Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-21Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: handle ack_busy when fetching the Config ROM
2011-08-21Btrfs: fix 64 bit divide problemJosef Bacik
This fixes a regression introduced by commit cdcb725c05fe ("Btrfs: check if there is enough space for balancing smarter"). We can't do 64-bit divides on 32-bit architectures. In cases where we need to divide/multiply by 2 we should just left/right shift respectively, and in cases where theres N number of devices use do_div. Also make the counters u64 to match up with rw_devices. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Acked-and-tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-21Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: flush any pending end_io requests before DIO reads w/dioread_nolock ext4: fix nomblk_io_submit option so it correctly converts uninit blocks ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN. ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode ext4: Fix ext4_should_writeback_data() for no-journal mode
2011-08-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfree ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.c ALSA: hda - Don't spew too many ELD errors ALSA: usb-audio - Fix missing mixer dB information ALSA: hda - Add "PCM" volume to vmaster slave list ALSA: hda - Fix duplicated capture-volume creation for ALC268 models ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelist ALSA: snd_usb_caiaq: track submitted output urbs
2011-08-20pci: fix new kernel-doc warning in pci.cRandy Dunlap
Fix new kernel-doc warning in pci.c: Warning(drivers/pci/pci.c:3259): No description found for parameter 'mps' Warning(drivers/pci/pci.c:3259): Excess function parameter 'rq' description in 'pcie_set_mps' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-20ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfreeJulia Lawall
The label outnodev is only used when kzalloc has not yet taken place or has failed, so there is no need for the call for kfree under this label. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != kfree(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-20ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.cTakashi Iwai
snd_hda_get_conn_index() returns a negative value while the current code stores it in an unsigned int. It must be stored in a signed integer. Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-20ALSA: hda - Don't spew too many ELD errorsTakashi Iwai
Currently HD-audio driver shows the all error ELD byte as an error in the kernel message. This is annoying when the video driver doesn't set the correct ELD from the beginning. e.g. radeon sends a zero-byte data, but we still check ELD with the fixed 128 byte as a workaround for some broken devices, it spews 128-times errors. For avoiding this, the driver aborts reading when the first byte is invalid. In such a case, the whole data is certainly invalid. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel: drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
2011-08-19ext4: flush any pending end_io requests before DIO reads w/dioread_nolockJiaying Zhang
There is a race between ext4 buffer write and direct_IO read with dioread_nolock mount option enabled. The problem is that we clear PageWriteback flag during end_io time but will do uninitialized-to-initialized extent conversion later with dioread_nolock. If an O_direct read request comes in during this period, ext4 will return zero instead of the recently written data. This patch checks whether there are any pending uninitialized-to-initialized extent conversion requests before doing O_direct read to close the race. Note that this is just a bandaid fix. The fundamental issue is that we clear PageWriteback flag before we really complete an IO, which is problem-prone. To fix the fundamental issue, we may need to implement an extent tree cache that we can use to look up pending to-be-converted extents. Signed-off-by: Jiaying Zhang <jiayingz@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2011-08-19drm/i915: set GFX_MODE to pre-Ivybridge default value even on IvybridgeJesse Barnes
Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that MI_FLUSH would flush the TLBs in addition to the rest of the caches indicated in the MI_FLUSH command. However starting with Ivybridge, the register defaults to 0x2800 out of reset, meaning that to invalidate the TLB we need to use PIPE_CONTROL. Since we're not doing that yet, go back to the old default so things work. v2: don't forget to actually *clear* the new bit Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-19Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-block: (23 commits) Revert "cfq: Remove special treatment for metadata rqs." block: fix flush machinery for stacking drivers with differring flush flags block: improve rq_affinity placement blktrace: add FLUSH/FUA support Move some REQ flags to the common bio/request area allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH xen/blkback: Make description more obvious. cfq-iosched: Add documentation about idling block: Make rq_affinity = 1 work as expected block: swim3: fix unterminated of_device_id table block/genhd.c: remove useless cast in diskstats_show() drivers/cdrom/cdrom.c: relax check on dvd manufacturer value drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse bsg-lib: add module.h include cfq-iosched: Reduce linked group count upon group destruction blk-throttle: correctly determine sync bio loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices loop: add management interface for on-demand device allocation loop: replace linked list of allocated devices with an idr index ...
2011-08-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: OF: Don't crash when bridge parent is NULL. PCI: export pcie_bus_configure_settings symbol PCI: code and comments cleanup PCI: make cardbus-bridge resources optional PCI: make SRIOV resources optional PCI : ability to relocate assigned pci-resources PCI: honor child buses add_size in hot plug configuration PCI: Set PCI-E Max Payload Size on fabric
2011-08-19PCI: OF: Don't crash when bridge parent is NULL.David Daney
In pcibios_get_phb_of_node(), we will crash while booting if bus->bridge->parent is NULL. Check for this case and avoid dereferencing the NULL pointer. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-19Revert "cfq: Remove special treatment for metadata rqs."Jens Axboe
We have a kernel build regression since 3.1-rc1, which is about 10% regression. The kernel source is in an ext3 filesystem. Alex Shi bisect it to commit: commit a07405b7802691d29ab3b23bdc76ee6d006aad0b Author: Justin TerAvest <teravest@google.com> Date: Sun Jul 10 22:09:19 2011 +0200 cfq: Remove special treatment for metadata rqs. Apparently this is caused by lack metadata preemption, where ext3/ext4 do use READ_META. I didn't see a way to fix the issue, so suggest reverting the patch. This reverts commit a07405b7802691d29ab3b23bdc76ee6d006aad0b. Reported-by: Alex Shi<alex.shi@intel.com> Reported-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19ALSA: usb-audio - Fix missing mixer dB informationTakashi Iwai
The recent fix for testing dB range at the mixer creation time seems to cause regressions in some devices. In such devices, reading the dB info at probing time gives an error, thus both dBmin and dBmax are still zero, and TLV flag isn't set although the later read of dB info succeeds. This patch adds a workaround for such a case by assuming that the later read will succeed. In future, a similar test should be performed in a case where a wrong dB range is seen even in the later read. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2011-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: fix array bounds error setting up PCIC NMI trap
2011-08-18Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: drivers/ata/sata_dwc_460ex.c: add missing kfree ata: Add iMX pata support pata_via: disable ATAPI DMA on AVERATEC 3200 [libata] sata_sil: fix used-uninit warning
2011-08-18Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.1: Return NFS4ERR_BADSESSION to callbacks during session resets NFSv4.1: Fix the callback 'highest_used_slotid' behaviour pnfs-obj: Fix the comp_index != 0 case pnfs-obj: Bug when we are running out of bio nfs: add missing prefetch.h include
2011-08-18sparc: fix array bounds error setting up PCIC NMI trapIan Campbell
CC arch/sparc/kernel/pcic.o arch/sparc/kernel/pcic.c: In function 'pcic_probe': arch/sparc/kernel/pcic.c:359:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:359:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:360:8: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:33: error: array subscript is above array bounds [-Werror=array-bounds] arch/sparc/kernel/pcic.c:361:8: error: array subscript is above array bounds [-Werror=array-bounds] cc1: all warnings being treated as errors I'm not particularly familiar with sparc but t_nmi (defined in head_32.S via the TRAP_ENTRY macro) and pcic_nmi_trap_patch (defined in entry.S) both appear to be 4 instructions long and I presume from the usage that instructions are int sized. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18drivers/ata/sata_dwc_460ex.c: add missing kfreeJulia Lawall
Currently, error handling code in this function calls the function sata_dwc_port_stop, but this function has essentially no effect if hsdevp has not been stored in ap, which is the case throughout this function. The only effect is to print a debugging message including ap->print_id. The code is rewritten to not call sata_dwc_port_stop, but instead to jump to a local label that prints the original error message and the print_id information. In the case where hsdevp has been already allocated (but not yet stored in ap), this value is freed as well. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18ata: Add iMX pata supportArnaud Patard (Rtp)
Add basic support for pata on iMX. It has been tested only on imx51. SDMA support will probably be added later so this version supports only PIO. v2: - enable only when needed IORDY - use dev_get_drvdata v3: - add missing clk_put() calls - use platform_get_irq() - fix resume code to avoid disabling IORDY on resume v4: - Remove EXPERIMENTAL and switch to depends on ARCH_MXC - Use devm_kzalloc() - make clock a must-have - Use only 1 ioremap Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18pata_via: disable ATAPI DMA on AVERATEC 3200Tejun Heo
On AVERATEC 3200, pata_via causes memory corruption with ATAPI DMA, which often leads to random kernel oops. The cause of the problem is not well understood yet and only small subset of machines using the controller seem affected. Blacklist ATAPI DMA on the machine. Signed-off-by: Tejun Heo <tj@kernel.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=11426 Reported-and-tested-by: Jim Bray <jimsantelmo@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-08-18[libata] sata_sil: fix used-uninit warningJeff Garzik
Init 'serror' to silence the following warning: drivers/ata/sata_sil.c: In function ‘sil_interrupt’: drivers/ata/sata_sil.c:453:14: warning: ‘serror’ may be used uninitialized in this function [-Wuninitialized] This is not a 'can never happen' but is nonetheless extremely unlikely. The easiest and cleanest warning fix is simply to init the var, rather than worry about marking the var uninit-ok. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: set i_size properly when fallocating and we already btrfs: unlock on error in btrfs_file_llseek() btrfs: btrfs_permission's RO check shouldn't apply to device nodes Btrfs: truncate pages from clone ioctl target range Btrfs: fix uninitialized sync_pending Btrfs: fix wrong free space information btrfs: memory leak in btrfs_add_inode_defrag() Btrfs: use plain page_address() in header fields setget functions Btrfs: forced readonly when btrfs_drop_snapshot() fails Btrfs: check if there is enough space for balancing smarter Btrfs: fix a bug of balance on full multi-disk partitions Btrfs: fix an oops of log replay Btrfs: detect wether a device supports discard Btrfs: force unplugs when switching from high to regular priority bios
2011-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: update cifs version to 1.75 [CIFS] possible memory corruption on mount cifs: demote cERROR in build_path_from_dentry to cFYI
2011-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: Support iSCSI PDU padding IBiser: Fix wrong mask when sizeof (dma_addr_t) > sizeof (unsigned long) IPoIB: Fix possible NULL dereference in ipoib_start_xmit()
2011-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6: fat: fat16 support maximum 4GB file/vol size as WinXP or 7. fat: fix utf8 iocharset warning message fat: fix build warning
2011-08-18irqdesc: fix new kernel-doc warningRandy Dunlap
Fix kernel-doc warning in irqdesc.c: Warning(kernel/irq/irqdesc.c:353): No description found for parameter 'owner' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-18i7core_edac: fixed typo in error count calculationMathias Krause
Based on a patch from the PaX Team, found during a clang analysis pass. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: PaX Team <pageexec@freemail.hu> Cc: stable@kernel.org [v2.6.35+] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-18Merge branch 'perf/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
2011-08-18update cifs version to 1.75Steve French
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-08-18[CIFS] possible memory corruption on mountSteve French
CIFS cleanup_volume_info_contents() looks like having a memory corruption problem. When UNCip is set to "&vol->UNC[2]" in cifs_parse_mount_options(), it should not be kfree()-ed in cleanup_volume_info_contents(). Introduced in commit b946845a9dc523c759cae2b6a0f6827486c3221a Signed-off-by: J.R. Okajima <hooanon05@yahoo.co.jp> Reviewed-by: Jeff Layton <jlayton@redhat.com> CC: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
generated by cgit (git 2.34.1) at 2025-09-13 17:26:46 +0000