| Age | Commit message (Collapse) | Author |
|---|
|
The highuid.rst document describes a transition that is outdated and no
longer relevant. Additionally, it references filesystems (ncpfs and smbfs),
which have been removed or replaced.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Kang Taeho <kangtaeho2456@gmail.com>
Link: https://lore.kernel.org/r/20250313145650.278346-1-kangtaeho2456@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The IBS software filter is filtering kernel samples for regular users in
the PMI handler. It checks the instruction address in the IBS register to
determine if it was in kernel mode or not.
But it turns out that it's possible to report a kernel data address even
if the instruction address belongs to user-space. Matteo Rizzo
found that when an instruction raises an exception, IBS can report some
kernel data addresses like IDT while holding the faulting instruction's
RIP. To prevent an information leak, it should double check if the data
address in PERF_SAMPLE_DATA is in the kernel space as well.
[ mingo: Clarified the changelog ]
Suggested-by: Matteo Rizzo <matteorizzo@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250317163755.1842589-1-namhyung@kernel.org
|
|
If @server->tcpStatus is set to CifsNeedReconnect after acquiring
@ses->session_mutex in smb2_reconnect() or cifs_reconnect_tcon(), it
means that a concurrent thread failed to negotiate, in which case the
server is no longer responding to any SMB requests, so there is no
point making the caller retry the IO by returning -EAGAIN.
Fix this by returning -EHOSTDOWN to the callers on soft mounts.
Cc: David Howells <dhowells@redhat.com>
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The majority of these last fixes are for devicetree files.
These address two important regressions for the Qualcomm SMMU and the
Raspberry Pi 4 USB controller, as well as a larger number of patches
fixing minor mistakes in board specific files for Rockchips, i.MX,
starfive and broadcom.
The non-DT changes are
- A fix for an old boot regression on Renesas shmobile chips
- Another boot time regression for for the Qualcomm PDR SoC driver,
among a few other Qualcomm firmware driver fixes for efivars and
tzmem
- Minor Kconfig fixes for davinci and OMAP1
- Minor code fixes for sparx5 reset controllers, OMAP memory
controller, i.MX SCU, cpufreq and SoC drivers and a Hisilicon SoC
driver
- One more update to the Asahi maintainers, adding Neal Gompa as a
reviewer"
* tag 'soc-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
ARM: davinci: da850: fix selecting ARCH_DAVINCI_DA8XX
soc: hisilicon: kunpeng_hccs: Fix incorrect string assembly
memory: omap-gpmc: drop no compatible check
reset: mchp: sparx5: Fix for lan966x
ARM: shmobile: smp: Enforce shmobile_smp_* alignment
MAINTAINERS: Add myself (Neal Gompa) as a reviewer for ARM Apple support
MAINTAINERS: Add apple-spi driver & binding files
arm64: dts: rockchip: slow down emmc freq for rock 5 itx
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200
ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300
ARM: dts: bcm2711: Don't mark timer regs unconfigured
ARM: OMAP1: select CONFIG_GENERIC_IRQ_CHIP
arm64: dts: rockchip: Add missing PCIe supplies to RockPro64 board dtsi
arm64: dts: rockchip: Add avdd HDMI supplies to RockPro64 board dtsi
arm64: dts: rockchip: Remove undocumented sdmmc property from lubancat-1
arm64: dts: rockchip: fix pinmux of UART5 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix pinmux of UART0 for PX30 Ringneck on Haikou
arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S
arm64: dts: bcm2712: PL011 UARTs are actually r1p5
ARM: dts: bcm2711: PL011 UARTs are actually r1p5
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Clean up tprobe correctly when module unload
Tracepoint probes do not set TRACEPOINT_STUB on the 'tpoint' pointer
when unloading a module, thus they show as a normal 'fprobe' instead
of 'tprobe' and never come back
- Fix leakage of tprobe module refcount
When a tprobe's target module is loaded, it gets the module's
refcount in the module notifier but forgot to put it after
registering the probe on it.
Fix it by getting the refcount only when registering tprobe.
* tag 'probes-fixes-v6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: tprobe-events: Fix leakage of module refcount
tracing: tprobe-events: Fix to clean up tprobe correctly when module unload
|
|
syzbot warns about a potential deadlock, but this is a false positive
resulting from a missing lockdep annotation: iterate_dir() locks the
parent whereas the inode_lock() it warns about locks the child, which is
guaranteed to be a different lock.
So use inode_lock_nested() instead with the appropriate lock class.
Reported-by: syzbot+019072ad24ab1d948228@syzkaller.appspotmail.com
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Tie together the %[xa] in the XSAVE/XRSTOR definitions with the
respective usage in the asm macros so that it is perfectly clear.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Use the hidden bank register to identify whether the LDO voltage is
fixed or variable. Remove the read of 'richtek,fixed-microvolt'
property.
Fixes: af1296d15d89 ("regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/dae0321b710518ce32260336e3cc9caf2ba84215.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the hidden bank RG to get the correct buck converter phase mapping.
Fixes: 85a11f55621a ("regulator: rtq2208: Add Richtek RTQ2208 SubPMIC")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/ae3245aa713f76000dbd20b4ad6f66d30611d3b8.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pwm_num is set to 7 for these chips, but NCT6776_REG_PWM_MODE and
NCT6776_PWM_MODE_MASK only contain 6 values.
Fix this by adding another 0 to the end of each array.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250312030832.106475-1-tasos@tasossah.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This entry has a wrong list, i2c instead of hwmon. Also, it states to
maintain Kconfig and Makefile which is not suitable for a single driver.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: 7707cf82e138 ("dt-bindings: hwmon: Add lltc ltc4286 driver bindings")
Link: https://lore.kernel.org/r/20250317091459.41462-2-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Recent Ubuntu enforces 3-argument open() with O_CREAT:
CC /home/mingo/tip/tools/objtool/builtin-check.o
In file included from /usr/include/fcntl.h:341,
from builtin-check.c:9:
In function ‘open’,
inlined from ‘copy_file’ at builtin-check.c:201:11:
/usr/include/x86_64-linux-gnu/bits/fcntl2.h:52:11: error: call to ‘__open_missing_mode’ declared with attribute error: open with O_CREAT or O_TMPFILE in second argument needs 3 arguments
52 | __open_missing_mode ();
| ^~~~~~~~~~~~~~~~~~~~~~
Use 0400 as the most restrictive mode for the new file.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
|
|
Objtool warnings can be indicative of crashes, broken live patching, or
even boot failures. Ignoring them is not recommended.
Add CONFIG_OBJTOOL_WERROR to upgrade objtool warnings to errors by
enabling the objtool --Werror option. Also set --backtrace to print the
branches leading up to the warning, which can help considerably when
debugging certain warnings.
To avoid breaking bots too badly for now, make it the default for real
world builds only (!COMPILE_TEST).
Co-developed-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/3e7c109313ff15da6c80788965cc7450115b0196.1741975349.git.jpoimboe@kernel.org
|
|
With bcecd5a529c1 ("percpu: repurpose __percpu tag as a named address
space qualifier") the normal compilers start caring about the __percpu
annotation, as such f67d1ffd841f ("perf/core: Detach 'struct
perf_cpu_pmu_context' and 'struct pmu' lifetimes") needs a fixup.
Fixes: f67d1ffd841f ("perf/core: Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes")
Fixes: bcecd5a529c1 ("percpu: repurpose __percpu tag as a named address space qualifier")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: jirislaby@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
cqhci timeouts observed on brcmstb platforms during suspend:
...
[ 164.832853] mmc0: cqhci: timeout for tag 18
...
Adding cqhci_suspend()/resume() calls to disable cqe
in sdhci_brcmstb_suspend()/resume() respectively to fix
CQE timeouts seen on PM suspend.
Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Cc: stable@vger.kernel.org
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250311165946.28190-1-kamal.dasu@broadcom.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Recreating objtool errors can be a manual process. Kbuild removes the
object, so it has to be compiled or linked again before running objtool.
Then the objtool args need to be reversed engineered.
Make that all easier by automatically making a backup of the object file
on error, and print a modified version of the args which can be used to
recreate.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/7571e30636359b3e173ce6e122419452bb31882f.1741975349.git.jpoimboe@kernel.org
|
|
This is similar to GCC's behavior and makes it more obvious why the
build failed.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/56f0565b15b4b4caa9a08953fa9c679dfa973514.1741975349.git.jpoimboe@kernel.org
|
|
Any objtool warning has the potential of reflecting (or triggering) a
major bug in the kernel or compiler which could result in crashing the
kernel or breaking the livepatch consistency model.
In preparation for failing the build on objtool errors/warnings, add a
new --Werror option.
[ jpoimboe: commit log, comments, error out on fatal errors too ]
Co-developed-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/e423ea4ec297f510a108aa6c78b52b9fe30fa8c1.1741975349.git.jpoimboe@kernel.org
|
|
Add option to allow writing the changed binary to a separate file rather
than changing it in place.
Libelf makes this suprisingly hard, so take the easy way out and just
copy the file before editing it.
Also steal the -o short option from --orc. Nobody will notice ;-)
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/0da308d42d82b3bbed16a31a72d6bde52afcd6bd.1741975349.git.jpoimboe@kernel.org
|
|
Force the user to fix their cmdline if they forget the '--link' option.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/8380bbf3a0fa86e03fd63f60568ae06a48146bc1.1741975349.git.jpoimboe@kernel.org
|
|
The option validations are a bit scattered, consolidate them.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/8f886502fda1d15f39d7351b70d4ebe5903da627.1741975349.git.jpoimboe@kernel.org
|
|
With unret validation enabled and IBT/LTO disabled, objtool runs on TUs
with --rethunk and on vmlinux.o with --unret. So this dependency isn't
valid as they don't always run on the same object.
This error never triggered before because --unret is always coupled with
--noinstr, so the first conditional in opts_valid() returns early due to
opts.noinstr being true.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/c6f5635784a28ed4b10ac4307b1858e015e6eff0.1741975349.git.jpoimboe@kernel.org
|
|
Increase the per-function WARN_FUNC() rate limit from 1 to 2. If the
number of warnings for a given function goes beyond 2, print "skipping
duplicate warning(s)". This helps root out additional warnings in a
function that might be hiding behind the first one.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/aec318d66c037a51c9f376d6fb0e8ff32812a037.1741975349.git.jpoimboe@kernel.org
|
|
Fix some outdated information in the objtool doc.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/2552ee8b48631127bf269359647a7389edf5f002.1741975349.git.jpoimboe@kernel.org
|
|
Clarify what needs to be done to resolve the missing __noreturn warning.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/ab835a35d00bacf8aff0b56257df93f14fdd8224.1741975349.git.jpoimboe@kernel.org
|
|
Make sure all fatal errors are funneled through the 'out' label with a
negative ret.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/0f49d6a27a080b4012e84e6df1e23097f44cc082.1741975349.git.jpoimboe@kernel.org
|
|
The CONFIG_X86_ESPFIX64 version of exc_double_fault() can return to its
caller, but the !CONFIG_X86_ESPFIX64 version never does. In the latter
case the compiler and/or objtool may consider it to be implicitly
noreturn.
However, due to the currently inflexible way objtool detects noreturns,
a function's noreturn status needs to be consistent across configs.
The current workaround for this issue is to suppress unreachable
warnings for exc_double_fault()'s callers. Unfortunately that can
result in ORC coverage gaps and potentially worse issues like inert
static calls and silently disabled CPU mitigations.
Instead, prevent exc_double_fault() from ever being implicitly marked
noreturn by forcing a return behind a never-taken conditional.
Until a more integrated noreturn detection method exists, this is likely
the least objectionable workaround.
Fixes: 55eeab2a8a11 ("objtool: Ignore exc_double_fault() __noreturn warnings")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/d1f4026f8dc35d0de6cc61f2684e0cb6484009d1.1741975349.git.jpoimboe@kernel.org
|
|
dl_rebuild_rd_accounting() is defined in cpuset.c, so it makes more
sense to move related declarations to cpuset.h.
Implement the move.
Suggested-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <llong@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MSOVMpU7jpVrMU@jlelli-thinkpadt14gen4.remote.csb
|
|
The are no callers of partition_sched_domains_locked() outside
topology.c.
Stop exposing such function.
Suggested-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MSC96a8FcqWV3G@jlelli-thinkpadt14gen4.remote.csb
|
|
partition_and_rebuild_sched_domains() and partition_sched_domains() are
now equivalent.
Remove the former as a nice clean up.
Suggested-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <llong@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MR4ryNDJZDzsSG@jlelli-thinkpadt14gen4.remote.csb
|
|
We completely clean and restore root domains bandwidth accounting after
every root domains change, so the dl_clear_root_domain() call in
partition_sched_domains_locked() is redundant.
Remove it.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <llong@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MRtcX4tz4tcLRR@jlelli-thinkpadt14gen4.remote.csb
|
|
Rebuilding of root domains accounting information (total_bw) is
currently broken on some cases, e.g. suspend/resume on aarch64. Problem
is that the way we keep track of domain changes and try to add bandwidth
back is convoluted and fragile.
Fix it by simplify things by making sure bandwidth accounting is cleared
and completely restored after root domains changes (after root domains
are again stable).
To be sure we always call dl_rebuild_rd_accounting while holding
cpuset_mutex we also add cpuset_reset_sched_domains() wrapper.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Co-developed-by: Waiman Long <llong@redhat.com>
Signed-off-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MRfeJKJUOyUSto@jlelli-thinkpadt14gen4.remote.csb
|
|
Bandwidth checks and updates that work on root domains currently employ
a cookie mechanism for efficiency. This mechanism is very much tied to
when root domains are first created and initialized.
Generalize the cookie mechanism so that it can be used also later at
runtime while updating root domains. Also, additionally guard it with
sched_domains_mutex, since domains need to be stable while updating them
(and it will be required for further dynamic changes).
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MQaiXPvEeW_v7x@jlelli-thinkpadt14gen4.remote.csb
|
|
Create wrappers for sched_domains_mutex so that it can transparently be
used on both CONFIG_SMP and !CONFIG_SMP, as some function will need to
do.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MP5Oq9RB8jBs3y@jlelli-thinkpadt14gen4.remote.csb
|
|
SCHED_DEADLINE special tasks get a fake bandwidth that is only used to
make sure sleeping and priority inheritance 'work', but it is ignored
for runtime enforcement and admission control.
Be consistent with it also when rebuilding root domains.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20250313170011.357208-2-juri.lelli@redhat.com
|
|
Use preempt_model_str() instead of manually conducting the preemption
model.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20250314160810.2373416-10-bigeasy@linutronix.de
|
|
die() invokes later show_regs() -> show_regs_print_info() which prints
the current preemption model.
Remove it from the initial line.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20250314160810.2373416-9-bigeasy@linutronix.de
|
|
After __die_header(), __die_body() is always invoked. There we have
show_regs() -> show_regs_print_info() which prints the current
preemption model.
Remove it from the initial line.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314160810.2373416-8-bigeasy@linutronix.de
|
|
die() invokes later show_regs() -> show_regs_print_info() which prints
the current preemption model.
Remove it from the initial line.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250314160810.2373416-7-bigeasy@linutronix.de
|
|
After the first printk in __die() there is show_regs() ->
show_regs_print_info() which prints the current
preemption model.
Remove the preempion model from the arch code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20250314160810.2373416-6-bigeasy@linutronix.de
|
|
__die() invokes later show_regs() -> show_regs_print_info() which prints
the current preemption model.
Remove it from the initial line.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250314160810.2373416-5-bigeasy@linutronix.de
|
|
__die() invokes later __show_regs() -> show_regs_print_info() which
prints the current preemption model.
Remove it from the initial line.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20250314160810.2373416-4-bigeasy@linutronix.de
|
|
Use preempt_model_str() to print the current preemption model. Use
pr_warn() instead of printk() to pass a loglevel. This makes it part of
generic WARN/ BUG traces.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314160810.2373416-3-bigeasy@linutronix.de
|
|
The pmu specific data is saved in task_struct now. Remove it from event
context structure.
Remove swap_task_ctx() as well.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-7-kan.liang@linux.intel.com
|
|
The individual architectures often add the preemption model to the begin
of the backtrace. This is the case on X86 or ARM64 for the "die" case
but not for regular warning. With the addition of DYNAMIC_PREEMPT for
PREEMPT_RT we end up with CONFIG_PREEMPT and CONFIG_PREEMPT_RT set
simultaneously. That means that everyone who tried to add that piece of
information gets it wrong for PREEMPT_RT because PREEMPT is checked
first.
Provide a generic function which returns the current scheduling model
considering LAZY preempt and the current state of PREEMPT_DYNAMIC.
The resulting strings are:
┏━━━━━━━━━━━┳━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━┓
┃ Model ┃ -RT -DYN ┃ +RT -DYN ┃ -RT +DYN ┃ +RT +DYN ┃
┡━━━━━━━━━━━╇━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━┩
│NONE │ NONE │ n/a │ PREEMPT(none) │ n/a │
├───────────┼──────────────┼───────────────────┼────────────────────┼───────────────────┤
│VOLUNTARY │ VOLUNTARY │ n/a │ PREEMPT(voluntary) │ n/a │
├───────────┼──────────────┼───────────────────┼────────────────────┼───────────────────┤
│FULL │ PREEMPT │ PREEMPT_RT │ PREEMPT(full) │ PREEMPT_{RT,full} │
├───────────┼──────────────┼───────────────────┼────────────────────┼───────────────────┤
│LAZY │ PREEMPT_LAZY │ PREEMPT_{RT,LAZY} │ PREEMPT(lazy) │ PREEMPT_{RT,lazy} │
└───────────┴──────────────┴───────────────────┴────────────────────┴───────────────────┘
[ The dynamic building of the string can lead to an empty string if the
function is invoked simultaneously on two CPUs. ]
Co-developed-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Co-developed-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Signed-off-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20250314160810.2373416-2-bigeasy@linutronix.de
|
|
The pmu specific data is saved in task_struct now. It doesn't need to
swap between context.
Remove swap_task_ctx() support.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-6-kan.liang@linux.intel.com
|
|
In the system-wide mode, LBR callstacks are shorter in comparison to
the per-process mode.
LBR MSRs are reset during a context switch in the system-wide mode. For
the LBR call stack, the LBRs should be always saved/restored during a
context switch.
Use the space in task_struct to save/restore the LBR call stack data.
For a system-wide event, it's unnecessagy to update the
lbr_callstack_users for each threads. Add a variable in x86_pmu to
indicate whether the system-wide event is active.
Fixes: 76cb2c617f12 ("perf/x86/intel: Save/restore LBR stack during context switch")
Reported-by: Andi Kleen <ak@linux.intel.com>
Reported-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Debugged-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-5-kan.liang@linux.intel.com
|
|
To save/restore LBR call stack data in system-wide mode, the task_struct
information is required.
Extend the parameters of sched_task() to supply task_struct information.
When schedule in, the LBR call stack data for new task will be restored.
When schedule out, the LBR call stack data for old task will be saved.
Only need to pass the required task_struct information.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-4-kan.liang@linux.intel.com
|
|
The LBR call stack data has to be saved/restored during context switch
to fix the shorter LBRs call stacks issue in the system-wide mode.
Allocate PMU specific data and attach them to the corresponding
task_struct during LBR call stack monitoring.
When a LBR call stack event is accounted, the perf_ctx_data for the
related tasks will be allocated/attached by attach_perf_ctx_data().
When a LBR call stack event is unaccounted, the perf_ctx_data for
related tasks will be detached/freed by detach_perf_ctx_data().
The LBR call stack event could be a per-task event or a system-wide
event.
- For a per-task event, perf only allocates the perf_ctx_data for the
current task. If the allocation fails, perf will error out.
- For a system-wide event, perf has to allocate the perf_ctx_data for
both the existing tasks and the upcoming tasks.
The allocation for the existing tasks is done in perf_event_alloc().
If any allocation fails, perf will error out.
The allocation for the new tasks will be done in perf_event_fork().
A global reader/writer semaphore, global_ctx_data_rwsem, is added to
address the global race.
- The perf_ctx_data only be freed by the last LBR call stack event.
The number of the per-task events is tracked by refcount of each task.
Since the system-wide events impact all tasks, it's not practical to
go through the whole task list to update the refcount for each
system-wide event. The number of system-wide events is tracked by a
global variable global_ctx_data_ref.
Suggested-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-3-kan.liang@linux.intel.com
|
|
To simplify the usage of the percpu rw semaphore.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-2-kan.liang@linux.intel.com
|
