| Age | Commit message (Collapse) | Author |
|---|
|
i.MX3x SoCs contain an Image Processing Unit, consisting of a Control
Module (CM), Display Interface (DI), Synchronous Display Controller (SDC),
Asynchronous Display Controller (ADC), Image Converter (IC), Post-Filter
(PF), Camera Sensor Interface (CSI), and an Image DMA Controller (IDMAC).
CM contains, among other blocks, an Interrupt Generator (IG) and a Clock
and Reset Control Unit (CRCU). This driver serves IDMAC and IG. They are
supported over dmaengine and irq-chip APIs respectively.
IDMAC is a specialised DMA controller, its DMA channels cannot be used for
general-purpose operations, even though it might be possible to configure
a memory-to-memory channel for memcpy operation. This driver will not work
with generic dmaengine clients, clients, wishing to use it must use
respective wrapper structures, they also must specify which channels they
require, as channels are hard-wired to specific IPU functions.
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
To complete the DMA_CTRL_ACK handling API add a async_tx_clear_ack() macro.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The device list will always be empty in this configuration, so no need
to walk the list.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
dma_find_channel and dma_issue_pending_all are good places to warn about
improper api usage. However, warning correctly means synchronizing with
dma_list_mutex, i.e. too much overhead for these fast-path calls.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Impact: use new work_on_cpu function to reduce stack usage
Replace the saving of current->cpus_allowed and set_cpus_allowed_ptr() with
a work_on_cpu function for drv_read() and drv_write().
Basically converts do_drv_{read,write} into "work_on_cpu" functions that
are now called by drv_read and drv_write.
Note: This patch basically reverts 50c668d6 which reverted 7503bfba, now
that the work_on_cpu() function is more stable.
Signed-off-by: Mike Travis <travis@sgi.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Tested-by: Dieter Ries <clip2@gmx.de>
Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <cpufreq@vger.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: remove potential clashes with generic kevent workqueue
Annoyingly, some places we want to use work_on_cpu are already in
workqueues. As per Ingo's suggestion, we create a different workqueue
for work_on_cpu.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: remove potential circular lock dependency with cpu hotplug lock
This has caused more problems than it solved, with a pile of cpu
hotplug locking issues.
Followup patches will get_online_cpus() in callers that need it, but
if they don't do it they're no worse than before when they were using
set_cpus_allowed without locking.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
There is only one clock board, so use -1 as the 'id' so we get just
the base name as the LED device name string.
There are multiple FHC boards potentially in a system so use the board
number as the 'id' value for that case.
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
set_lock_status omits mutex_unlock in fail path. Add the omitted
unlock.
As a result a lockup caused by this can be triggered from userspace
by writing 1 to /sys/bus/pci/slots/.../lock often enough.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
|
|
Mention in the Kconfig help text that the HDAV1.3 code is rather
experimental.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a missing newline.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This hardware has a better chance of working correctly if we don't
forget to enable it.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
CC drivers/ide/palm_bk3710.o
drivers/ide/palm_bk3710.c: In function 'palm_bk3710_probe':
drivers/ide/palm_bk3710.c:382: warning: assignment makes integer from pointer without a cast
Someone should fix hw_regs_t to neither be a typedef, nor
use "unsigned long" where it should use "void __iomem *".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
|
|
[m68k] Falcon IDE: always serialize, in order to force execution of
ide_get_lock() and friends.
Signed-off-By: Michael Schmitz <schmitz@debian.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
[bart: set flag in falconide_port_info instead of falconide_init()]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
|
|
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> writes:
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> ---
> drivers/ide/ide-probe.c | 9 ++-------
> 1 file changed, 2 insertions(+), 7 deletions(-)
>
> Index: b/drivers/ide/ide-probe.c
> ===================================================================
> --- a/drivers/ide/ide-probe.c
> +++ b/drivers/ide/ide-probe.c
> @@ -640,14 +640,9 @@ static int ide_register_port(ide_hwif_t
> /* register with global device tree */
> dev_set_name(&hwif->gendev, hwif->name);
> hwif->gendev.driver_data = hwif;
> - if (hwif->gendev.parent == NULL) {
> - if (hwif->dev)
> - hwif->gendev.parent = hwif->dev;
> - else
> - /* Would like to do = &device_legacy */
> - hwif->gendev.parent = NULL;
> - }
> + hwif->gendev.parent = hwif->dev;
This [bart: commit 96d40941236722777c259775640b8880b7dc6f33 ("ide: small
ide_register_port() cleanup")] breaks ide-pmac. It overwrites the parent
that pmac_ide_macio_attach has set.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
|
|
Device maps now contain a link to the master that created them, so
when cleaning up the master, remove any maps that are connected to it.
Also delete any remaining maps at driver unload time.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Remove the last of the macros-defined-to-static-functions.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
|
|
Recently we have quite a few kerneloops reports about dereferencing a NULL
if_data in the attribute fork. From looking over the code this can only
happen if we pass a 0 size argument to xfs_iformat_local. This implies some
sort of corruption and in fact the only mailinglist report about this from
earlier this year was after a powerfail presumably on a system with write
cache and without barriers.
Add a quick sanity check for the attr fork size in xfs_iformat to catch
these early and without an oops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
Currently the bad_features2 fixup and the alignment updates in the superblock
are skipped if we mount a filesystem read-only. But for the root filesystem
the typical case is to mount read-only first and only later remount writeable
so we'll never perform this update at all. It's not a big problem but means
the logs of people needing the fixup get spammed at every boot because they
never happen on disk.
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
We can have both a user and a group/project dquot locked at the same time,
as long as the user dquot is locked first. Tell lockdep about that fact
by making the group/project dquots a different lock class.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
xfs_dqlock2 locks two xfs_dquots, which is fine as it always locks the
dquot with the lower id first. Use mutex_lock_nested to tell lockdep
about this fact.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
We can have both a a quota hash chain and the per-mount list locked at
the same time. But given that both use the same struct dqhash as list
head we have to tell lockdep that they are different lock classes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
The compat version of the attrmulti ioctl needs to ask for and then
later release write access to the mount just like the native version,
otherwise we could potentially write to read-only mounts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
Open by handle just grabs an inode by handle and then creates itself
a dentry for it. While this works for regular files it is horribly
broken for directories, where the VFS locking relies on the fact that
there is only just one single dentry for a given inode, and that
these are always connected to the root of the filesystem so that
it's locking algorithms work (see Documentations/filesystems/Locking)
Remove all the existing open by handle code and replace it with a small
wrapper around the exportfs code which deals with all these issues.
At the same time we also make the checks for a valid handle strict
enough to reject all not perfectly well formed handles - given that
we never hand out others that's okay and simplifies the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
|
|
The function setup_cpu_local_masks() has been marked __init, in
order to remove the following section mismatch messages:
WARNING: vmlinux.o(.text+0x3c2c7): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var()
The function setup_cpu_local_masks() references
the function __init alloc_bootmem_cpumask_var().
This is often because setup_cpu_local_masks lacks a __init
annotation or the annotation of alloc_bootmem_cpumask_var is wrong.
WARNING: vmlinux.o(.text+0x3c2d3): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var()
The function setup_cpu_local_masks() references
the function __init alloc_bootmem_cpumask_var().
This is often because setup_cpu_local_masks lacks a __init
annotation or the annotation of alloc_bootmem_cpumask_var is wrong.
WARNING: vmlinux.o(.text+0x3c2df): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var()
The function setup_cpu_local_masks() references
the function __init alloc_bootmem_cpumask_var().
This is often because setup_cpu_local_masks lacks a __init
annotation or the annotation of alloc_bootmem_cpumask_var is wrong.
WARNING: vmlinux.o(.text+0x3c2eb): Section mismatch in reference from the function setup_cpu_local_masks() to the function .init.text:alloc_bootmem_cpumask_var()
The function setup_cpu_local_masks() references
the function __init alloc_bootmem_cpumask_var().
This is often because setup_cpu_local_masks lacks a __init
annotation or the annotation of alloc_bootmem_cpumask_var is wrong.
Signed-off-by: Leonardo Potenza <lpotenza@inwind.it>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Andrey Borzenkov reported this lockdep assert:
> [17854.688347] =================================
> [17854.688347] [ INFO: inconsistent lock state ]
> [17854.688347] 2.6.29-rc2-1avb #1
> [17854.688347] ---------------------------------
> [17854.688347] inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
> [17854.688347] pm-suspend/18240 [HC0[0]:SC0[0]:HE1:SE1] takes:
> [17854.688347] (&cpu_base->lock){++..}, at: [<c0136fcc>] retrigger_next_event+0x5c/0xa0
> [17854.688347] {in-hardirq-W} state was registered at:
> [17854.688347] [<c01443cd>] __lock_acquire+0x79d/0x1930
> [17854.688347] [<c01455bc>] lock_acquire+0x5c/0x80
> [17854.688347] [<c03092e5>] _spin_lock+0x35/0x70
> [17854.688347] [<c0136e61>] hrtimer_run_queues+0x31/0x140
> [17854.688347] [<c0128d98>] run_local_timers+0x8/0x20
> [17854.688347] [<c0128dd3>] update_process_times+0x23/0x60
> [17854.688347] [<c013e274>] tick_periodic+0x24/0x80
> [17854.688347] [<c013e2e2>] tick_handle_periodic+0x12/0x70
> [17854.688347] [<c0104e24>] timer_interrupt+0x14/0x20
> [17854.688347] [<c01607b9>] handle_IRQ_event+0x29/0x60
> [17854.688347] [<c0161c59>] handle_level_irq+0x69/0xe0
> [17854.688347] [<ffffffff>] 0xffffffff
> [17854.688347] irq event stamp: 55771
> [17854.688347] hardirqs last enabled at (55771): [<c0309125>] _spin_unlock_irqrestore+0x35/0x60
> [17854.688347] hardirqs last disabled at (55770): [<c0309419>] _spin_lock_irqsave+0x19/0x80
> [17854.688347] softirqs last enabled at (54836): [<c0124f54>] __do_softirq+0xc4/0x110
> [17854.688347] softirqs last disabled at (54831): [<c01049ae>] do_softirq+0x8e/0xe0
> [17854.688347]
> [17854.688347] other info that might help us debug this:
> [17854.688347] 3 locks held by pm-suspend/18240:
> [17854.688347] #0: (&buffer->mutex){--..}, at: [<c01dd4c5>] sysfs_write_file+0x25/0x100
> [17854.688347] #1: (pm_mutex){--..}, at: [<c015056f>] enter_state+0x4f/0x140
> [17854.688347] #2: (dpm_list_mtx){--..}, at: [<c027880f>] device_pm_lock+0xf/0x20
> [17854.688347]
> [17854.688347] stack backtrace:
> [17854.688347] Pid: 18240, comm: pm-suspend Not tainted 2.6.29-rc2-1avb #1
> [17854.688347] Call Trace:
> [17854.688347] [<c0306248>] ? printk+0x18/0x20
> [17854.688347] [<c0141fac>] print_usage_bug+0x16c/0x1d0
> [17854.688347] [<c0142bcf>] mark_lock+0x8bf/0xc90
> [17854.688347] [<c0106b8f>] ? pit_next_event+0x2f/0x40
> [17854.688347] [<c01441b0>] __lock_acquire+0x580/0x1930
> [17854.688347] [<c030916d>] ? _spin_unlock+0x1d/0x20
> [17854.688347] [<c0106b8f>] ? pit_next_event+0x2f/0x40
> [17854.688347] [<c013dd38>] ? clockevents_program_event+0x98/0x160
> [17854.688347] [<c0142fe8>] ? mark_held_locks+0x48/0x90
> [17854.688347] [<c0309125>] ? _spin_unlock_irqrestore+0x35/0x60
> [17854.688347] [<c0143229>] ? trace_hardirqs_on_caller+0x139/0x190
> [17854.688347] [<c014328b>] ? trace_hardirqs_on+0xb/0x10
> [17854.688347] [<c01455bc>] lock_acquire+0x5c/0x80
> [17854.688347] [<c0136fcc>] ? retrigger_next_event+0x5c/0xa0
> [17854.688347] [<c03092e5>] _spin_lock+0x35/0x70
> [17854.688347] [<c0136fcc>] ? retrigger_next_event+0x5c/0xa0
> [17854.688347] [<c0136fcc>] retrigger_next_event+0x5c/0xa0
> [17854.688347] [<c013711a>] hres_timers_resume+0xa/0x10
> [17854.688347] [<c013aa8e>] timekeeping_resume+0xee/0x150
> [17854.688347] [<c0273384>] __sysdev_resume+0x14/0x50
> [17854.688347] [<c0273407>] sysdev_resume+0x47/0x80
> [17854.688347] [<c02791ab>] device_power_up+0xb/0x20
> [17854.688347] [<c015043f>] suspend_devices_and_enter+0xcf/0x150
> [17854.688347] [<c0150c2f>] ? freeze_processes+0x3f/0x90
> [17854.688347] [<c0150614>] enter_state+0xf4/0x140
> [17854.688347] [<c01506dd>] state_store+0x7d/0xc0
> [17854.688347] [<c0150660>] ? state_store+0x0/0xc0
> [17854.688347] [<c0202da4>] kobj_attr_store+0x24/0x30
> [17854.688347] [<c01dd53c>] sysfs_write_file+0x9c/0x100
> [17854.688347] [<c019916c>] vfs_write+0x9c/0x160
> [17854.688347] [<c0103494>] ? restore_nocheck_notrace+0x0/0xe
> [17854.688347] [<c01dd4a0>] ? sysfs_write_file+0x0/0x100
> [17854.688347] [<c01992ed>] sys_write+0x3d/0x70
> [17854.688347] [<c0103371>] sysenter_do_call+0x12/0x31
Andrey's analysis:
> timekeeping_resume() is called via class ->resume
> method; and according to comments in sysdev_resume() and
> device_power_up(), they are called with interrupts disabled.
>
> Looking at suspend_enter, irqs *are* disabled at this point.
>
> So it actually looks like something (may be some driver)
> unconditionally enabled irqs in resume path.
Add a debug check to test this theory. If it triggers then it
triggers because the resume code calls it with irqs enabled,
which is a no-no not just for timekeeping_resume(), but also
bad for a number of other resume handlers.
Reported-by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: add debug warning
Fire off one message if two apic's discovered with different
apic versions. (this code is only called during CPU init)
The goal of this is to pave the way of the removal of the apic_version[]
array. We dont expect any apic version incompatibilities in the x86
landscape of systems [if so we dont handle them very well and probably
never will handle deep apic version assymetries well], but it's prudent
to have a debug check for one kernel cycle nevertheless.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Commit da4276b8299a6544dc41ac2485d3ffca5811b3fb changed a dependency
for FRAME_POINTER from X86 to ARCH_WANT_FRAME_POINTERS, but didn't
actually define it.
This patch adds the definition for ARCH_WANT_FRAME_POINTERS. Without it,
FRAME_POINTER can't be enabled on x86.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
One fail path in relay_late_setup_files() omits
mutex_unlock(&relay_channels_mutex);
Add it.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
|
|
|
|
Remove removed OSS kernel parameters from kernel-parameters.txt
Remove the kernel parameters from the OSS drivers of the chips
es1371 (removed 10-2007/2.6.24) and
cs4232 (removed 02-2008/2.6.25) from the kernel parameters documentation.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fixed invalid power mappings for ports 0xd and 0xe on 93hd83xxx codecs.
They were shifted right one too many bits.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Previously PeeCeeI.o was a library but it
was always pulled in due to insw and friends being exported
(at least for a modular kernel).
But this resulted in modpost failures if there where no in-kernel
users because then insw & friends were not linked in.
Fix this by including PeeCeeI.o in the kernel unconditionally.
The only drawback for this solution is that a nonmodular kernel
will always include insw & friends no matter if they are in use or not.
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Meelis reported that on his box /proc/cpuinfo started
to reported "Unknow CPU" and the same did the boot messages.
It was a stupid bug I introduced when merging
cpu.c for 32 and 64 bit.
The code did an array reference where it had to search
for the right index.
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/ehca: Use consistent types for ehca_plpar_hcall9()
IB/ehca: Fix printk format warnings from u64 type change
IPoIB: Do not print error messages for multicast join retries
IB/mlx4: Fix memory ordering problem when posting LSO sends
mlx4_core: Fix min() warning
IPoIB: Fix deadlock between ipoib_open() and child interface create
IPoIB: Fix hang in napi_disable() if P_Key is never found
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
move wm8400-regulator's probe function to .devinit.text
|
|
Reading 0 bytes from /sys/devices/platform/dell_rbu/image_type or
/sys/devices/platform/dell_rbu/packet_size by an ordinary user causes an
oops.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Plug this leak.
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: <stable@kernel.org>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Impact: fix crash
In case of losing samples struct op_entry could have been used
uninitialized causing e.g. a wrong preemption count or NULL pointer
access. This patch fixes this.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
A pointer to wm8400_regulator_probe is passed to the core via
platform_driver_register and so the function must not disappear when the
.init sections are discarded. Otherwise (if also having HOTPLUG=y)
unbinding and binding a device to the driver via sysfs will result in an
oops as does a device being registered late.
An alternative to this patch is using platform_driver_probe instead of
platform_driver_register plus removing the pointer to the probe function
from the struct platform_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
|
|
|
|
|
|
|
|
ehca_plpar_hcall9() takes an unsigned long array, so make all callers
pass that in. This fixes warnings introduced by commit fe333321
("powerpc: Change u64/s64 to a long long integer type"), which changed
u64 from unsigned long to unsigned long long.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
Commit fe333321 ("powerpc: Change u64/s64 to a long long integer
type") changed u64 from unsigned long to unsigned long long, which
means that printk formats for printing u64 values should use "ll"
instead of "l" to avoid warnings. Fix all the places affected by this
in ehca.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
|
|
p54 doesn't support AES-128-CMAC offload.
This patch will fix the noisy mac80211 warnings, when 802.11w is enabled:
mac80211-phy189: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-22)
mac80211-phy189: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-22)
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Fix for:
BUG: scheduling while atomic: named/2004/0x10000200
Pid: 2004, comm: named Not tainted 2.6.29-rc1-00271-ge9fa6b0 #45
Call Trace:
[<c04d4ef7>] schedule+0x2a7/0x320
[<c03aed74>] __alloc_skb+0x34/0x110
[<c011f5b3>] __cond_resched+0x13/0x30
[<c04d501d>] _cond_resched+0x2d/0x40
[<c016d8c5>] kmem_cache_alloc+0x95/0xc0
[<c016b8d4>] check_object+0xc4/0x230
[<c03aed74>] __alloc_skb+0x34/0x110
[<c02ede91>] p54_alloc_skb+0x71/0xf0
[<c02ee36f>] p54_set_tim+0x3f/0xa0
[<c04ae064>] sta_info_set_tim_bit+0x64/0x80
[<c04c1017>] invoke_tx_handlers+0xd57/0xd80
[<c016c397>] free_debug_processing+0x197/0x210
[<c03ae215>] pskb_expand_head+0xf5/0x170
[<c04bfd94>] __ieee80211_tx_prepare+0x164/0x2f0
[<c04c1a8d>] ieee80211_skb_resize+0x6d/0xe0
[<c04c250f>] ieee80211_master_start_xmit+0x23f/0x550
[<c016d188>] __slab_alloc+0x2b8/0x4f0
[<c013a711>] getnstimeofday+0x51/0x120
[<c03b5e7b>] dev_hard_start_xmit+0x1db/0x240
[<c03c6a4b>] __qdisc_run+0x1ab/0x200
[<c0136aa1>] __run_hrtimer+0x31/0xf0
[<c03b6247>] dev_queue_xmit+0x247/0x500
[<c04c1e56>] ieee80211_subif_start_xmit+0x356/0x7d0
[<c0466ff7>] packet_rcv_spkt+0x37/0x150
[<c0466ff7>] packet_rcv_spkt+0x37/0x150
[<c03b5e7b>] dev_hard_start_xmit+0x1db/0x240
[<c03c6a4b>] __qdisc_run+0x1ab/0x200
[<c03b6247>] dev_queue_xmit+0x247/0x500
[<c03bc1e2>] neigh_resolve_output+0xe2/0x200
[<c0410080>] ip_finish_output+0x0/0x290
[<c0410267>] ip_finish_output+0x1e7/0x290
[<c040f355>] ip_local_out+0x15/0x20
[<c040f5d2>] ip_push_pending_frames+0x272/0x380
[<c042bbc6>] udp_push_pending_frames+0x146/0x3a0
[<c042d52a>] udp_sendmsg+0x2fa/0x6b0
[<c0433bc7>] inet_sendmsg+0x37/0x70
[<c03a7b7e>] sock_sendmsg+0xbe/0x100
[<c0133cd0>] autoremove_wake_function+0x0/0x50
[<c011c043>] __wake_up_common+0x43/0x70
[<c024a892>] copy_from_user+0x32/0x130
[<c024a892>] copy_from_user+0x32/0x130
[<c03b001e>] verify_iovec+0x2e/0xb0
[<c03a7d3f>] sys_sendmsg+0x17f/0x290
[<c017730a>] pipe_write+0x29a/0x570
[<c013a172>] update_wall_time+0x492/0x8e0
[<c013a711>] getnstimeofday+0x51/0x120
[<c011b05d>] sched_slice+0x3d/0x80
[<c013a711>] getnstimeofday+0x51/0x120
[<c0136657>] hrtimer_forward+0x147/0x1a0
[<c01101b0>] lapic_next_event+0x10/0x20
[<c013ccb3>] clockevents_program_event+0xa3/0x170
[<c03a9054>] sys_socketcall+0xa4/0x290
[<c0110920>] smp_apic_timer_interrupt+0x40/0x70
[<c0103165>] sysenter_do_call+0x12/0x25
Signed-off-by: Artur Skawina <art.08.09@gmail.com>
Acked-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
When running modprobe rt73usb, and then rmmod rt73usb, and then
iwconfig, the wlan0 device does not disappear. When repeating this
process again, we get a kernel Oops errors and "BUG: unable to handle
kernel paging request..." message in the kernel log.
The reason for this is that there is an error in rt2x00rfkill_free(),
which is called in the process of removing the device
(rt2x00lib_remove_dev() in rt2x00dev.c).
rt2x00rfkill_free() clears the RFKILL_STATE_ALLOCATED bit , which is
bit number 1 () in rt2x00dev->flags instead of in
rt2x00dev->rfkill_state. As a result, when checking the
DEVICE_STATE_REGISTERED_HW bit (bit number 1 in rt2x00dev->flags) in
rt2x00lib_remove_hw() it is **unset**, and we wrongly **don't** call
ieee80211_unregister_hw().
This patch corrects this: the parameter for __test_and_clear_bit() in
rt2x00rfkill_free() should be &rt2x00dev->rfkill_state and not
&rt2x00dev->flags.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
