summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-26ALSA: hda - Add post_suspend patch opsTakashi Iwai
Add a new ops, post_suspend(), which is called after suspend() ops is performed. This is called only in the case of the real PM suspend, and the codec driver can use this for further changing of D-state or clearing the LED, etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Make CONFIG_SND_HDA_POWER_SAVE depending on CONFIG_PMTakashi Iwai
It makes little sense to enable power-saving without PM. This removes SND_HDA_NEEDS_RESUME define so that we can use CONFIG_PM in all places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ext4: fix data corruption in inodes with journalled dataJan Kara
When journalling data for an inode (either because it is a symlink or because the filesystem is mounted in data=journal mode), ext4_evict_inode() can discard unwritten data by calling truncate_inode_pages(). This is because we don't mark the buffer / page dirty when journalling data but only add the buffer to the running transaction and thus mm does not know there are still unwritten data. Fix the problem by carefully tracking transaction containing inode's data, committing this transaction, and writing uncheckpointed buffers when inode should be reaped. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-07-26block: fix warning with calling smp_processor_id() in preemptible sectionJens Axboe
After commit 5757a6d7 introduced an unsafe calling of smp_processor_id(), with preempt debuggin turned on we spew a lot of: BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/514 caller is __make_request+0x1b8/0x308 [<c0019f44>] (unwind_backtrace+0x0/0xe8) from [<c024b4cc>] (debug_smp_processor_id+0xbc/0xf0) [<c024b4cc>] (debug_smp_processor_id+0xbc/0xf0) from [<c0223d14>] (__make_request+0x1b8/0x308) [<c0223d14>] (__make_request+0x1b8/0x308) from [<c02215ac>] (generic_make_request+0x4dc/0x558) [<c02215ac>] (generic_make_request+0x4dc/0x558) from [<c022173c>] (submit_bio+0x114/0x138) [<c022173c>] (submit_bio+0x114/0x138) from [<c011f504>] (submit_bh+0x148/0x16c) [<c011f504>] (submit_bh+0x148/0x16c) from [<c0121ed8>] (__sync_dirty_buffer+0x88/0xd8) [<c0121ed8>] (__sync_dirty_buffer+0x88/0xd8) from [<c01aff78>] (journal_commit_transaction+0x1198/0x1688) [<c01aff78>] (journal_commit_transaction+0x1198/0x1688) from [<c01b4034>] (kjournald+0xb4/0x224) [<c01b4034>] (kjournald+0xb4/0x224) from [<c0069ea0>] (kthread+0x8c/0x94) [<c0069ea0>] (kthread+0x8c/0x94) from [<c00137f8>] (kernel_thread_exit+0x0/0x8) Fix this by just using raw_smp_processor_id(), it's just a hint after all. There's no pinning of the CPU or accessing per-cpu structures involved. Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-26drm/radeon/kms: fix DP training for DPEncoderService revision bigger than 1.1Jerome Glisse
DPEncoderService newer than 1.1 can't properly program the DP (display port) link training. When facing such version use the DIGxEncoderControl method instead. Fix DP link training on some R7XX. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-26drm/radeon/kms: add missing vddci setting on NI+Alex Deucher
Need to add vddci setting to pm init as well as resume. Fixes hangs on load on some boards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=38754 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-26dmaengine: pl08x: handle the rest of enums in pl08x_widthVinod Koul
pl08x_width function does not handle rest of enums for DMA_SLAVE_BUSWIDTH_xxxx which causes gcc to emit below warining drivers/dma/amba-pl08x.c: In function 'pl08x_width': drivers/dma/amba-pl08x.c:1119: warning: enumeration value 'DMA_SLAVE_BUSWIDTH_UNDEFINED' not handled in switch drivers/dma/amba-pl08x.c:1119: warning: enumeration value 'DMA_SLAVE_BUSWIDTH_8_BYTES' not handled in switch this patch adds a default case which returns error Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26DMA: PL08x: cleanup selection of burst sizeRussell King - ARM Linux
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26DMA: PL08x: avoid recalculating cctl at each prepareRussell King - ARM Linux
Now that we have separate cctl values for M>P and P>M transfers, we can avoid calculating the cctl value each time we prepare a transaction. Move the bus selection and increment setting to the slave configuration and initialization functions. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26DMA: PL08x: cleanup selection of buswidthRussell King - ARM Linux
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26DMA: PL08x: constify plchan->cd and plat->slave_channelsRussell King - ARM Linux
We no longer write to the channel data structure, so we can make it const throughout the driver. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26DMA: PL08x: separately store source/destination cctlRussell King - ARM Linux
Store the source/destination cctl values into the channel structure. This moves us towards being able to avoid a configuration call each time we use the channel. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26DMA: PL08x: separately store source/destination slave addressRussell King - ARM Linux
Store the source/destination slave address separately into the channel structure. This moves us towards being able to avoid a configuration call each time we use the channel. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26DMA: PL08x: clean up LLI debuggingRussell King - ARM Linux
Clean up debugging when setting up the LLI list. This reduces the amount of output while preserving the information, and makes it easier to read. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26DMA: PL08x: select LLI bus only once per LLI setupRussell King - ARM Linux
Avoid re-selecting the LLI bus each time we create an LLI. Move it out of the LLI setup loops. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26DMA: PL08x: remove unused constantsRussell King - ARM Linux
PL08X_WQ_PERIODMIN and PL08X_MAX_ALLOCS are not used, remove them. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26ARM: mxs-dma: reset after disable channelDong Aisheng
We met some channels in abnormal state after disable. Reset it to get a clean state. Signed-off-by: Dong Aisheng <b29396@freescale.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26dma: intel_mid_dma: remove redundant pci_set_drvdata callsAxel Lin
Call pci_set_drvdata() once in intel_mid_dma_probe() is enough. Remove redundant pci_set_drvdata() calls in dma_suspend() and dma_resume(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26dma: mxs-dma: fix unterminated platform_device_id tableAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26dmaengine: pl330: make platform data optionalRob Herring
The pl330 needs platform data for describing peripheral connections, but some platforms may only support memory to memory dma channels. In this case, we can probe for how many channels there are and don't need the platform data. As memcpy requests don't need channel private data to hold peripheral info, allow private data to be NULL in this case. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Vinod Koul <vkoul@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-26[SCSI] mpt2sas: WarpDrive Infinite command retries due to wrong scsi command ↵Kashyap, Desai
entry in MPI message Issue: This issue is seen on LSI H/W WarpDrive SSS6200 When filed direct I/O is tried as volume I/O the scmd field in internal lookup table get cleared and because of that the retried volume I/O never gets reported as completed to SML. Result: I/O timeout and Error handling thread will kicking off Fix: Setting back the scmd in the lookup table before retrying the failed direct i/o Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] bnx2fc: Replace printks with KERN_ALERT to KERN_ERR/KERN_INFOBhanu Prakash Gollapudi
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] scsi_transport_spi: Export host width and HBA idHannes Reinecke
Currently it's impossible to find out if the host supports wide SCSI unless you're committed to trawl through syslog. And it's near impossible to find the actual HBA id, which is settable for some SCSI HBAs (like aic7xxx). So export them via sysfs. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ankit Jain <jankit@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26target: Convert to DIV_ROUND_UP_SECTOR_T usage for sectors / dev_max_sectorsNicholas Bellinger
This patch adds the new macro usage of include/linux/kernel.h:DIV_ROUND_UP_SECTOR_T for the new DIV_ROUND_UP_ULL() usage for 32-bit architectures with unsigned long long sector_t division in transport_allocate_data_tasks() usage for target_core_mod v4.1 Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-26Revert "microblaze: PCI fix typo fault in of_node pointer moving into pci_bus"Michal Simek
This reverts commit c9d761b7c4b658a937a941aea2781f511a0ff3ec. Ben' commit "microblaze/pci: Move the remains of pci_32.c to pci-common.c" (sha1: bf13a6fa09b8db7f1fd59b5e2ed3674a89a6a25c) completely removed pci_32.c that's why my fixing commit caused the problem with merging and need to be revert. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-26GFS2: Fix mount hang caused by certain access pattern to sysfs filesSteven Whitehouse
Depending upon the order of userspace/kernel during the mount process, this can result in a hang without the _all version of the completion. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-07-26kernel.h: Add DIV_ROUND_UP_ULL and DIV_ROUND_UP_SECTOR_T macro usageNicholas Bellinger
Add new DIV_ROUND_UP_SECTOR_T macro usage for 32-bit architectures requiring a new DIV_ROUND_UP_ULL, and existing 64-bit usage with DIV_ROUND_UP. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-26iscsi-target: Add iSCSI fabric support for target v4.1Nicholas Bellinger
The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-26[SCSI] mvsas: Add support for interrupt taskletXiangliang Yu
Add support for interrupt tasklet, which will improve performance. Correct spelling of "20011" [jejb: simplified ifdefs and fixed unused variable problem] Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26ARM: board-mx51_babbage: Fix UART2 registrationFabio Estevam
On MX51 Babbage board the RTS/CTS pins are not used on UART2 port. Fix the registration of this port. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-26ALSA: hda - Make sure mute led reflects master mute stateVitaliy Kulikov
This patch adds checking of mute state on all outputs besides just speakers to calculate the master mute state for mute led support. It also renames and splits the function that does it for better code clarity. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26ALSA: hda - Fix invalid mute led state on resume of IDT codecsVitaliy Kulikov
Codec state is not restored immediately on resume but on the first access when power-save is enabled. That leads to an invalid mute led state after resume until either sound is played or some control is changed. This patch adds a possibility for a vendor specific patch to restore codec state immediately after resume if required. And it adds code to restore IDT codecs state immediately on resume on HP systems with mute led support. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-26efika: Fix board id detectionArnaud Patard (Rtp)
Current code is assuming that gpio_get_value() is returning 0 or 1 but it should be checking if the value is 0 or not. Not doing it properly is breaking the detection of the board (and thus the reboot of efika mx to2) when using the new mxc gpio driver, which relies on basic mmio gpio. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-26efikasb: fix gpio keys.Arnaud Patard (Rtp)
While testing the keys, I only checked that the key were generating an input event but unfortunately, they were not generating the right event. Fix that. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-26efikasb/mx: fix usbh1 initialisationArnaud Patard (Rtp)
mx51_initialize_usb_hw() support introduced a small error. The usbh1 has pdev->id equal to 1 not 0, so use pdev->id to make things less error-prone and to fix that. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-26ARM: mx53: add pad configuration for I2C signalsEric Miao
I2C signals SDA/SCL are a bit different, they need to be pull-up and open-drain (so to support multiple I2C devices). Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-26ARM: mach-imx/mx31lilly: Fix section mismatchesFabio Estevam
Fix the following section mismatches: WARNING: vmlinux.o(.text+0x1026c): Section mismatch in reference from the function lilly1131_usb_init() to the variable .init.rodata:imx31_mxc_ehci_hs_data The function lilly1131_usb_init() references the variable __initconst imx31_mxc_ehci_hs_data. This is often because lilly1131_usb_init lacks a __initconst annotation or the annotation of imx31_mxc_ehci_hs_data is wrong. WARNING: vmlinux.o(.text+0x10270): Section mismatch in reference from the function lilly1131_usb_init() to the (unknown reference) .init.rodata:(unknown) The function lilly1131_usb_init() references the (unknown reference) __initconst (unknown). This is often because lilly1131_usb_init lacks a __initconst annotation or the annotation of (unknown) is wrong. WARNING: vmlinux.o(.text+0x10274): Section mismatch in reference from the function lilly1131_usb_init() to the (unknown reference) .init.data:(unknown) The function lilly1131_usb_init() references the (unknown reference) __initdata (unknown). This is often because lilly1131_usb_init lacks a __initdata annotation or the annotation of (unknown) is wrong. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-26ARM: mach-imx/mx31ads: Fix section mismatchesFabio Estevam
Fix the following section mismatches: WARNING: vmlinux.o(.text+0x101cc): Section mismatch in reference from the function mxc_init_i2c() to the (unknown reference) .init.data:(unknown) The function mxc_init_i2c() references the (unknown reference) __initdata (unknown). This is often because mxc_init_i2c lacks a __initdata annotation or the annotation of (unknown) is wrong. WARNING: vmlinux.o(.text+0x101d8): Section mismatch in reference from the function mxc_init_i2c() to the variable .init.rodata:imx31_imx_i2c_data The function mxc_init_i2c() references the variable __initconst imx31_imx_i2c_data. This is often because mxc_init_i2c lacks a __initconst annotation or the annotation of imx31_imx_i2c_data is wrong. WARNING: vmlinux.o(.text+0x10200): Section mismatch in reference from the function mxc_init_audio() to the variable .init.rodata:imx31_imx_ssi_data The function mxc_init_audio() references the variable __initconst imx31_imx_ssi_data. This is often because mxc_init_audio lacks a __initconst annotation or the annotation of imx31_imx_ssi_data is wrong. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-26Add tlv320aic32x4 platform data to Visstrim_M10.Javier Martin
Without this platform data the aic32x4 audio codec in the Visstrim_M10 won't work properly. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-25p9: avoid unused variable warningLinus Torvalds
Commit 4e34e719e457 ("fs: take the ACL checks to common code") removed the use of the 'acl' variable in v9fs_iop_get_acl(), but left the variable definition around. Remove it to get rid of the warning: fs/9p/acl.c: In function ‘v9fs_iop_get_acl’: fs/9p/acl.c:101:20: warning: unused variable ‘acl’ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26[SCSI] mvsas: update commentsXiangliang Yu
Remove obsolete comments and add new comments Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: misc improvementsXiangliang Yu
Change code to match HBA datasheet. Change code to make it readable. Add support big endian for mvs_prd_imt. Add cpu_to_le32 and cpu_to_le64 to use on addr. Add scan_finished for structure mvs_prv_info. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: Add new macros and functionsXiangliang Yu
Add new macros: MVS_SOFT_RESET, MVS_HARD_RESET, MVS_PHY_TUNE, MVS_COMMAND_ACTIVE, EXP_BRCT_CHG, MVS_MAX_SG Add new member sg_width in struct mvs_chip_info Use macros rather than magic number Add new functions: mvs_fill_ssp_resp_iu, mvs_set_sense, mvs_94xx_clear_srs_irq, mvs_94xx_phy_set_link_rate Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: Remove unused macros, variables and functionsXiangliang Yu
Remove unused macros: VSR_PHY_VS0, VSR_PHY_VS1, MVS_SLOTS, MVS_CAN_QUEUE, MVS_MSI, SG_MX, _MV_DUMP, MV_DISABLE_NCQ Remove unused variables for mvs_info: irq, exp_req, cmd_size Remove unused functions: mvs_get_sas_addr, mvs_hexdump, mvs_hba_sb_dump, mvs_hab_memory_dump, mvs_hba_cq_dump Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: fix 94xx hotplug issueXiangliang Yu
Fix 94xx A0/B0 revision hotplug issue. Remove unused macro: DISABLE_HOTPLUG_DMA_FIX Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: Add driver version and interrupt coalescing to device ↵Xiangliang Yu
attributes in sysfs Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-26[SCSI] mvsas: add support for 94xx phy tuning and multiple revisionsXiangliang Yu
Add 94xx phy tuning to aid manufacturing. Add support for 94xx multiple revisions: A0, B0, C0, C1, C2. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-25Merge branch 'staging-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (741 commits) staging:iio:meter:ade7753 should be 16 bit read not 8 bit for mode register. staging:iio:kfifo_buf fix double initialization of the ring device structure. staging:iio:accel:lis3l02dq: fix incorrect pointer passed to spi_set_drvdata. staging:iio:imu fix missing register table index for some channels spectra: enable device before poking it staging: rts_pstor: Fix a miswriting staging/lirc_bt829: Return -ENODEV when no hardware is found. staging/lirc_parallel: remove pointless prototypes. staging/lirc_parallel: fix panic on rmmod staging:iio:adc:ad7476: Incorrect pointer into spi_set_drvdata. Staging: zram: Fix kunmapping order Revert "gma500: Fix dependencies" gma500: Add medfield header gma500: wire up the mrst i2c bus from chip_info gma500: Fix DPU build gma500: Clean up the DPU config and make it runtime gma500: resync with Medfield progress gma500: Use the mrst helpers and power control for mode commit gma500@ Fix backlight range error gma500: More Moorestown muddle meddling means MM maybe might modeset ... Fix up fairly trivial conflicts all over, mostly due to header file cleanup conflicts, but some deleted files and some just context changes: - Documentation/feature-removal-schedule.txt - drivers/staging/bcm/headers.h - drivers/staging/brcm80211/brcmfmac/dhd_linux.c - drivers/staging/brcm80211/brcmfmac/dhd_sdio.c - drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h - drivers/staging/brcm80211/brcmfmac/wl_iw.c - drivers/staging/et131x/et131x_netdev.c - drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c - drivers/staging/rtl8192e/r8192E.h - drivers/staging/usbip/userspace/src/utils.h
2011-07-26[SCSI] mvsas: Add support for Non specific NCQ error interruptXiangliang Yu
Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-25Merge branch 'tty-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (26 commits) amba pl011: workaround for uart registers lockup n_gsm: fix the wrong FCS handling pch_uart: add missing comment about OKI ML7223 pch_uart: Add MSI support tty: fix "IRQ45: nobody cared" PTI feature to allow user to name and mark masterchannel request. 0 for o PTI Makefile bug. tty: serial: samsung.c remove legacy PM code. SERIAL: SC26xx: Fix link error. serial: mrst_max3110: initialize waitqueue earlier mrst_max3110: Change max missing message priority. tty: s5pv210: Add delay loop on fifo reset function for UART tty/serial: Fix XSCALE serial ports, e.g. ce4100 serial: bfin_5xx: fix off-by-one with resource size drivers/tty: use printk_ratelimited() instead of printk_ratelimit() tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs tty: n_gsm: Add raw-ip support tty: n_gsm: expose gsmtty device nodes at ldisc open time pch_phub: Fix register miss-setting issue serial: 8250, increase PASS_LIMIT ...
generated by cgit (git 2.34.1) at 2025-09-27 13:43:58 +0000