| Age | Commit message (Collapse) | Author |
|---|
|
Now pneigh_entry is guaranteed to be alive during the
RCU critical section even without holding tbl->lock.
Let's drop read_lock_bh(&tbl->lock) and use rcu_dereference()
to iterate tbl->phash_buckets[] in pneigh_dump_table()
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Only __dev_get_by_index() is the RTNL dependant in neigh_get().
Let's replace it with dev_get_by_index_rcu() and convert RTM_GETNEIGH
to RCU.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will convert pneigh readers to RCU, and its flags and protocol
will be read locklessly.
Let's annotate the access to the two fields.
Note that all access to pn->permanent is under RTNL (neigh_add()
and pneigh_ifdown_and_unlock()), so WRITE_ONCE() and READ_ONCE()
are not needed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will convert RTM_GETNEIGH to RCU.
neigh_get() looks up pneigh_entry by pneigh_lookup() and passes
it to pneigh_fill_info().
Then, we must ensure that the entry is alive till pneigh_fill_info()
completes, but read_lock_bh(&tbl->lock) in pneigh_lookup() does not
guarantee that.
Also, we will convert all readers of tbl->phash_buckets[] to RCU.
Let's use call_rcu() to free pneigh_entry and update phash_buckets[]
and ->next by rcu_assign_pointer().
pneigh_ifdown_and_unlock() uses list_head to avoid overwriting
->next and moving RCU iterators to another list.
pndisc_destructor() (only IPv6 ndisc uses this) uses a mutex, so it
is not delayed to call_rcu(), where we cannot sleep. This is fine
because the mcast code works with RCU and ipv6_dev_mc_dec() frees
mcast objects after RCU grace period.
While at it, we change the return type of pneigh_ifdown_and_unlock()
to void.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The next patch will free pneigh_entry with call_rcu().
Then, we need to annotate neigh_table.phash_buckets[] and
pneigh_entry.next with __rcu.
To make the next patch cleaner, let's annotate the fields in advance.
Currently, all accesses to the fields are under the neigh table lock,
so rcu_dereference_protected() is used with 1 for now, but most of them
(except in pneigh_delete() and pneigh_ifdown_and_unlock()) will be
replaced with rcu_dereference() and rcu_dereference_check().
Note that pneigh_ifdown_and_unlock() changes pneigh_entry.next to a
local list, which is illegal because the RCU iterator could be moved
to another list. This part will be fixed in the next patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pneigh_lookup() has ASSERT_RTNL() in the middle of the function, which
is confusing.
When called with the last argument, creat, 0, pneigh_lookup() literally
looks up a proxy neighbour entry. This is the case of the reader path
as the fast path and RTM_GETNEIGH.
pneigh_lookup(), however, creates a pneigh_entry when called with creat 1
from RTM_NEWNEIGH and SIOCSARP, which require RTNL.
Let's split pneigh_lookup() into two functions.
We will convert all the reader paths to RCU, and read_lock_bh(&tbl->lock)
in the new pneigh_lookup() will be dropped.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
neigh_valid_get_req() calls neigh_find_table() to fetch neigh_tables[].
neigh_find_table() uses rcu_dereference_rtnl(), but RTNL actually does
not protect it at all; neigh_table_clear() can be called without RTNL
and only waits for RCU readers by synchronize_rcu().
Fortunately, there is no bug because IPv4 is built-in, IPv6 cannot be
unloaded, and DECNET was removed.
To fetch neigh_tables[] by rcu_dereference() later, let's move
neigh_find_table() from neigh_valid_get_req() to neigh_get().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove RTNL for neigh_get() and run it under RCU instead.
neigh_get_reply() and pneigh_get_reply() allocate skb with GFP_KERNEL.
Let's move the allocation before __dev_get_by_index() in neigh_get().
Now, neigh_get_reply() and pneigh_get_reply() are inlined and
rtnl_unicast() is factorised.
We will convert pneigh_lookup() to __pneigh_lookup() later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove RTNL for neigh_get() and run it under RCU instead.
neigh_get() returns -EINVAL in the following cases:
* NDA_DST is not specified
* Both ndm->ndm_ifindex and NTF_PROXY are not specified
These validations do not require RCU.
Let's move them to neigh_valid_get_req().
While at it, the extack string for the first case is replaced with
NL_SET_ERR_ATTR_MISS().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
neigh_get() passes 4 local variable pointers to neigh_valid_get_req().
If it returns a pointer of struct ndmsg, we do not need to pass two
of them.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250716221221.442239-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reorder output format arrays in both MT8195 DPI and DP_INTF block
configuration by decreasing preference order instead of alphanumeric
one, as expected by the atomic_get_output_bus_fmts callback function
of drm_bridge controls, so the RGB ones are used first during the
bus format negotiation process.
Fixes: 20fa6a8fc588 ("drm/mediatek: mtk_dpi: Allow additional output formats on MT8195/88")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250606-mtk_dpi-mt8195-fix-wrong-color-v1-1-47988101b798@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Currently even the SoC's OVL does not declare the support of AFBC, AFBC
is still announced to the userspace within the IN_FORMATS blob, which
breaks modern Wayland compositors like KWin Wayland and others.
Gate passing modifiers to drm_universal_plane_init() behind querying the
driver of the hardware block for AFBC support.
Fixes: c410fa9b07c3 ("drm/mediatek: Add AFBC support to Mediatek DRM driver")
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: CK Hu <ck.hu@medaitek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250531121140.387661-1-uwu@icenowy.me/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Our hardware registers are set through GCE, not by the CPU.
DRM might assume the hardware is disabled immediately after calling
atomic_disable() of drm_plane, but it is only truly disabled after the
GCE IRQ is triggered.
Additionally, the cursor plane in DRM uses async_commit, so DRM will
not wait for vblank and will free the buffer immediately after calling
atomic_disable().
To prevent the framebuffer from being freed before the layer disable
settings are configured into the hardware, which can cause an IOMMU
fault error, a wait_event_timeout has been added to wait for the
ddp_cmdq_cb() callback,indicating that the GCE IRQ has been triggered.
Fixes: 2f965be7f900 ("drm/mediatek: apply CMDQ control flow")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250624113223.443274-1-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Jakub Kicinski says:
====================
ethtool: rss: support RSS_SET via Netlink
Support configuring RSS settings via Netlink.
Creating and removing contexts remains for the following series.
v2: https://lore.kernel.org/20250714222729.743282-1-kuba@kernel.org
v1: https://lore.kernel.org/20250711015303.3688717-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250716000331.1378807-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test configuring input-xfrm and hash fields with all the limitations.
Tested on mlx5 (CX6):
# ./ksft-net-drv/drivers/net/hw/rss_api.py
TAP version 13
1..10
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
ok 8 rss_api.test_rxfh_fields_set
ok 9 rss_api.test_rxfh_fields_set_xfrm
ok 10 rss_api.test_rxfh_fields_ntf
# Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://patch.msgid.link/20250716000331.1378807-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET.
The tricky part is dealing with symmetric hashing. In netlink user
can change the hashing fields and symmetric hash in one request,
in IOCTL the two used to be set via different uAPI requests.
Since fields and hash function config are still separate driver
callbacks - changes to the two are not atomic. Keep things simple
and validate the settings against both pre- and post- change ones.
Meaning that we will reject the config request if user tries
to correct the flow fields and set input_xfrm in one request,
or disables input_xfrm and makes flow fields non-symmetric.
We can adjust it later if there's a real need. Starting simple feels
right, and potentially partially applying the settings isn't nice,
either.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support configuring symmetric hashing via Netlink.
We have the flow field config prepared as part of SET handling,
so scan it for conflicts instead of querying the driver again.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Help YNL decode the values for input-xfrm by defining
the possible values in the spec. Don't define "no change"
as it's an IOCTL artifact with no use in Netlink.
With this change on mlx5 input-xfrm gets decoded:
# ynl --family ethtool --dump rss-get
[{'header': {'dev-index': 2, 'dev-name': 'eth0'},
'hfunc': 1,
'hkey': b'V\xa8\xf9\x9 ...',
'indir': [0, 1, ... ],
'input-xfrm': {'sym-or-xor'}, <<<
'flow-hash': {'ah4': {'ip-dst', 'ip-src'},
'ah6': {'ip-dst', 'ip-src'},
'esp4': {'ip-dst', 'ip-src'},
'esp6': {'ip-dst', 'ip-src'},
'ip4': {'ip-dst', 'ip-src'},
'ip6': {'ip-dst', 'ip-src'},
'tcp4': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'tcp6': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'udp4': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'udp6': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'}}
}]
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test setting hashing key via Netlink.
# ./tools/testing/selftests/drivers/net/hw/rss_api.py
TAP version 13
1..7
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://patch.msgid.link/20250716000331.1378807-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support setting RSS hashing key via ethtool Netlink.
Use the Netlink policy to make sure user doesn't pass
an empty key, "resetting" the key is not a thing.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support setting RSS hash function / algo via ethtool Netlink.
Like IOCTL we don't validate that the function is within the
range known to the kernel. The drivers do a pretty good job
validating the inputs, and the IDs are technically "dynamically
queried" rather than part of uAPI.
Only change should be that in Netlink we don't support user
explicitly passing ETH_RSS_HASH_NO_CHANGE (0), if no change
is requested the attribute should be absent.
The ETH_RSS_HASH_NO_CHANGE is retained in driver-facing
API for consistency (not that I see a strong reason for it).
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test setting indirection table via Netlink.
# ./tools/testing/selftests/drivers/net/hw/rss_api.py
TAP version 13
1..6
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_fields
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250716000331.1378807-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We support decoding a binary type with a scalar subtype already,
add support for sending such arrays to the kernel. While at it
also support using "None" to indicate that the binary attribute
should be empty. I couldn't decide whether empty binary should
be [] or None, but there should be no harm in supporting both.
Link: https://patch.msgid.link/20250716000331.1378807-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multiple tests check min queue count, create a helper.
Link: https://patch.msgid.link/20250716000331.1378807-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add initial support for RSS_SET, for now only operations on
the indirection table are supported.
Unlike the ioctl don't check if at least one parameter is
being changed. This is how other ethtool-nl ops behave,
so pick the ethtool-nl consistency vs copying ioctl behavior.
There are two special cases here:
1) resetting the table to defaults;
2) support for tables of different size.
For (1) I use an empty Netlink attribute (array of size 0).
(2) may require some background. AFAICT a lot of modern devices
allow allocating RSS tables of different sizes. mlx5 can upsize
its tables, bnxt has some "table size calculation", and Intel
folks asked about RSS table sizing in context of resource allocation
in the past. The ethtool IOCTL API has a concept of table size,
but right now the user is expected to provide a table exactly
the size the device requests. Some drivers may change the table
size at runtime (in response to queue count changes) but the
user is not in control of this. What's not great is that all
RSS contexts share the same table size. For example a device
with 128 queues enabled, 16 RSS contexts 8 queues in each will
likely have 256 entry tables for each of the 16 contexts,
while 32 would be more than enough given each context only has
8 queues. To address this the Netlink API should avoid enforcing
table size at the uAPI level, and should allow the user to express
the min table size they expect.
To fully solve (2) we will need more driver plumbing but
at the uAPI level this patch allows the user to specify
a table size smaller than what the device advertises. The device
table size must be a multiple of the user requested table size.
We then replicate the user-provided table to fill the full device
size table. This addresses the "allow the user to express the min
table size" objective, while not enforcing any fixed size.
From Netlink perspective .get_rxfh_indir_size() is now de facto
the "max" table size supported by the device.
We may choose to support table replication in ethtool, too,
when we actually plumb this thru the device APIs.
Initially I was considering moving full pattern generation
to the kernel (which queues to use, at which frequency and
what min sequence length). I don't think this complexity
would buy us much and most if not all devices have pow-2
table sizes, which simplifies the replication a lot.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net_iovs should have the dma address set to 0 so that
netmem_dma_unmap_page_attrs() correctly skips the unmap. This was
not done in mlx5 when support for devmem tx was added and resulted
in the splat below when the platform iommu was enabled.
This patch addresses the issue by using netmem_dma_unmap_addr_set()
which handles the net_iov case when setting the dma address. A small
refactoring of mlx5e_dma_push() was required to be able to use this API.
The function was split in two versions and each version called
accordingly. Note that netmem_dma_unmap_addr_set() introduces an
additional if case.
Splat:
WARNING: CPU: 14 PID: 2587 at drivers/iommu/dma-iommu.c:1228 iommu_dma_unmap_page+0x7d/0x90
Modules linked in: [...]
Unloaded tainted modules: i10nm_edac(E):1 fjes(E):1
CPU: 14 UID: 0 PID: 2587 Comm: ncdevmem Tainted: G S E 6.15.0+ #3 PREEMPT(voluntary)
Tainted: [S]=CPU_OUT_OF_SPEC, [E]=UNSIGNED_MODULE
Hardware name: HPE ProLiant DL380 Gen10 Plus/ProLiant DL380 Gen10 Plus, BIOS U46 06/01/2022
RIP: 0010:iommu_dma_unmap_page+0x7d/0x90
Code: [...]
RSP: 0000:ff6b1e3ea0b2fc58 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ff46ef2d0a2340c8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001
RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff8827a120
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000d8000000
R13: 0000000000000008 R14: 0000000000000001 R15: 0000000000000000
FS: 00007feb69adf740(0000) GS:ff46ef2c779f1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007feb69cca000 CR3: 0000000154b97006 CR4: 0000000000773ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
dma_unmap_page_attrs+0x227/0x250
mlx5e_poll_tx_cq+0x163/0x510 [mlx5_core]
mlx5e_napi_poll+0x94/0x720 [mlx5_core]
__napi_poll+0x28/0x1f0
net_rx_action+0x33a/0x420
? mlx5e_completion_event+0x3d/0x40 [mlx5_core]
handle_softirqs+0xe8/0x2f0
__irq_exit_rcu+0xcd/0xf0
common_interrupt+0x47/0xa0
asm_common_interrupt+0x26/0x40
RIP: 0033:0x7feb69cd08ec
Code: [...]
RSP: 002b:00007ffc01b8c880 EFLAGS: 00000246
RAX: 00000000c3a60cf7 RBX: 0000000000045e12 RCX: 000000000000000e
RDX: 00000000000035b4 RSI: 0000000000000000 RDI: 00007ffc01b8c8c0
RBP: 00007ffc01b8c8b0 R08: 0000000000000000 R09: 0000000000000064
R10: 00007ffc01b8c8c0 R11: 0000000000000000 R12: 00007feb69cca000
R13: 00007ffc01b90e48 R14: 0000000000427e18 R15: 00007feb69d07000
</TASK>
Cc: Mina Almasry <almasrymina@google.com>
Reported-by: Stanislav Fomichev <stfomichev@gmail.com>
Closes: https://lore.kernel.org/all/aFM6r9kFHeTdj-25@mini-arch/
Fixes: 5a842c288cfa ("net/mlx5e: Add TX support for netmems")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/1752649242-147678-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao reports that arm64 emits the following warning
with CONFIG_DEBUG_VIRTUAL:
[ 58.896157] virt_to_phys used for non-linear address: 000000009fea9737
(__start_BTF+0x0/0x685530)
[ 23.988669] WARNING: CPU: 25 PID: 1442 at arch/arm64/mm/physaddr.c:15
__virt_to_phys (arch/arm64/mm/physaddr.c:?)
...
[ 24.075371] Tainted: [E]=UNSIGNED_MODULE, [N]=TEST
[ 24.080276] Hardware name: Quanta S7GM 20S7GCU0010/S7G MB (CG1), BIOS 3D22
07/03/2024
[ 24.088295] pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
[ 24.098440] pc : __virt_to_phys (arch/arm64/mm/physaddr.c:?)
[ 24.105398] lr : __virt_to_phys (arch/arm64/mm/physaddr.c:?)
...
[ 24.197257] Call trace:
[ 24.199761] __virt_to_phys (arch/arm64/mm/physaddr.c:?) (P)
[ 24.206883] btf_sysfs_vmlinux_mmap (kernel/bpf/sysfs_btf.c:27)
[ 24.214264] sysfs_kf_bin_mmap (fs/sysfs/file.c:179)
[ 24.218536] kernfs_fop_mmap (fs/kernfs/file.c:462)
[ 24.222461] mmap_region (./include/linux/fs.h:? mm/internal.h:167
mm/vma.c:2405 mm/vma.c:2467 mm/vma.c:2622 mm/vma.c:2692)
It seems that the memory layout on arm64 maps the kernel image in vmalloc space
which is different than x86. This makes virt_to_phys emit the warning.
Fix this by translating the address using __pa_symbol as suggested by
Breno instead.
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/bpf/g2gqhkunbu43awrofzqb4cs4sxkxg2i4eud6p4qziwrdh67q4g@mtw3d3aqfgmb/
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Tested-by: Breno Leitao <leitao@debian>
Fixes: a539e2a6d51d ("btf: Allow mmap of vmlinux btf")
Link: https://lore.kernel.org/r/20250717-vmlinux-mmap-pa-symbol-v1-1-970be6681158@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When SCX_OPS_ENQ_MIGRATION_DISABLED is enabled, migration-disabled tasks
are also routed to ops.enqueue(). A scheduler may attempt to dispatch
such tasks directly to an idle CPU using the default idle selection
policy via scx_bpf_select_cpu_and() or scx_bpf_select_cpu_dfl().
This scenario must be properly handled by the built-in idle policy to
avoid returning an idle CPU where the target task isn't allowed to run.
Otherwise, it can lead to errors such as:
EXIT: runtime error (SCX_DSQ_LOCAL[_ON] cannot move migration disabled Chrome_ChildIOT[291646] from CPU 3 to 14)
Prevent this by explicitly handling migration-disabled tasks in the
built-in idle selection logic, maintaining their CPU affinity.
Fixes: a730e3f7a48bc ("sched_ext: idle: Consolidate default idle CPU selection kfuncs")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc7).
Conflicts:
Documentation/netlink/specs/ovpn.yaml
880d43ca9aa4 ("netlink: specs: clean up spaces in brackets")
af52020fc599 ("ovpn: reject unexpected netlink attributes")
drivers/net/phy/phy_device.c
a44312d58e78 ("net: phy: Don't register LEDs for genphy")
f0f2b992d818 ("net: phy: Don't register LEDs for genphy")
https://lore.kernel.org/20250710114926.7ec3a64f@kernel.org
drivers/net/wireless/intel/iwlwifi/fw/regulatory.c
drivers/net/wireless/intel/iwlwifi/mld/regulatory.c
5fde0fcbd760 ("wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap")
ea045a0de3b9 ("wifi: iwlwifi: add support for accepting raw DSM tables by firmware")
net/ipv6/mcast.c
ae3264a25a46 ("ipv6: mcast: Delay put pmc->idev in mld_del_delrec()")
a8594c956cc9 ("ipv6: mcast: Avoid a duplicate pointer check in mld_del_delrec()")
https://lore.kernel.org/8cc52891-3653-4b03-a45e-05464fe495cf@kernel.org
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit cff5f49d433fcd0063c8be7dd08fa5bf190c6c37.
Commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if not
frozen") modified the cgroup_freezing() logic to verify that the FROZEN
flag is not set, affecting the return value of the freezing() function,
in order to address a warning in __thaw_task.
A race condition exists that may allow tasks to escape being frozen. The
following scenario demonstrates this issue:
CPU 0 (get_signal path) CPU 1 (freezer.state reader)
try_to_freeze read freezer.state
__refrigerator freezer_read
update_if_frozen
WRITE_ONCE(current->__state, TASK_FROZEN);
...
/* Task is now marked frozen */
/* frozen(task) == true */
/* Assuming other tasks are frozen */
freezer->state |= CGROUP_FROZEN;
/* freezing(current) returns false */
/* because cgroup is frozen (not freezing) */
break out
__set_current_state(TASK_RUNNING);
/* Bug: Task resumes running when it should remain frozen */
The existing !frozen(p) check in __thaw_task makes the
WARN_ON_ONCE(freezing(p)) warning redundant. Removing this warning enables
reverting the commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check
if not frozen") to resolve the issue.
The warning has been removed in the previous patch. This patch revert the
commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if not
frozen") to complete the fix.
Fixes: cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if not frozen")
Reported-by: Zhong Jiawei<zhongjiawei1@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if not
frozen") modified the cgroup_freezing() logic to verify that the FROZEN
flag is not set, affecting the return value of the freezing() function,
in order to address a warning in __thaw_task.
A race condition exists that may allow tasks to escape being frozen. The
following scenario demonstrates this issue:
CPU 0 (get_signal path) CPU 1 (freezer.state reader)
try_to_freeze read freezer.state
__refrigerator freezer_read
update_if_frozen
WRITE_ONCE(current->__state, TASK_FROZEN);
...
/* Task is now marked frozen */
/* frozen(task) == true */
/* Assuming other tasks are frozen */
freezer->state |= CGROUP_FROZEN;
/* freezing(current) returns false */
/* because cgroup is frozen (not freezing) */
break out
__set_current_state(TASK_RUNNING);
/* Bug: Task resumes running when it should remain frozen */
The existing !frozen(p) check in __thaw_task makes the
WARN_ON_ONCE(freezing(p)) warning redundant. Removing this warning enables
reverting commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if
not frozen") to resolve the issue.
This patch removes the warning from __thaw_task. A subsequent patch will
revert commit cff5f49d433f ("cgroup_freezer: cgroup_freezing: Check if
not frozen") to complete the fix.
Reported-by: Zhong Jiawei<zhongjiawei1@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN, WiFi and Netfilter.
More code here than I would have liked. That said, better now than
next week. Nothing particularly scary stands out. The improvement to
the OpenVPN input validation is a bit large but better get them in
before the code makes it to a final release. Some of the changes we
got from sub-trees could have been split better between the fix and
-next refactoring, IMHO, that has been communicated.
We have one known regression in a TI AM65 board not getting link. The
investigation is going a bit slow, a number of people are on vacation.
We'll try to wrap it up, but don't think it should hold up the
release.
Current release - fix to a fix:
- Bluetooth: L2CAP: fix attempting to adjust outgoing MTU, it broke
some headphones and speakers
Current release - regressions:
- wifi: ath12k: fix packets received in WBM error ring with REO LUT
enabled, fix Rx performance regression
- wifi: iwlwifi:
- fix crash due to a botched indexing conversion
- mask reserved bits in chan_state_active_bitmap, avoid FW assert()
Current release - new code bugs:
- nf_conntrack: fix crash due to removal of uninitialised entry
- eth: airoha: fix potential UaF in airoha_npu_get()
Previous releases - regressions:
- net: fix segmentation after TCP/UDP fraglist GRO
- af_packet: fix the SO_SNDTIMEO constraint not taking effect and a
potential soft lockup waiting for a completion
- rpl: fix UaF in rpl_do_srh_inline() for sneaky skb geometry
- virtio-net: fix recursive rtnl_lock() during probe()
- eth: stmmac: populate entire system_counterval_t in get_time_fn()
- eth: libwx: fix a number of crashes in the driver Rx path
- hv_netvsc: prevent IPv6 addrconf after IFF_SLAVE lost that meaning
Previous releases - always broken:
- mptcp: fix races in handling connection fallback to pure TCP
- rxrpc: assorted error handling and race fixes
- sched: another batch of "security" fixes for qdiscs (QFQ, HTB)
- tls: always refresh the queue when reading sock, avoid UaF
- phy: don't register LEDs for genphy, avoid deadlock
- Bluetooth: btintel: check if controller is ISO capable on
btintel_classify_pkt_type(), work around FW returning incorrect
capabilities
Misc:
- make OpenVPN Netlink input checking more strict before it makes it
to a final release
- wifi: cfg80211: remove scan request n_channels __counted_by, it's
only yielding false positives"
* tag 'net-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
rxrpc: Fix to use conn aborts for conn-wide failures
rxrpc: Fix transmission of an abort in response to an abort
rxrpc: Fix notification vs call-release vs recvmsg
rxrpc: Fix recv-recv race of completed call
rxrpc: Fix irq-disabled in local_bh_enable()
selftests/tc-testing: Test htb_dequeue_tree with deactivation and row emptying
net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree
net: bridge: Do not offload IGMP/MLD messages
selftests: Add test cases for vlan_filter modification during runtime
net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime
tls: always refresh the queue when reading sock
virtio-net: fix recursived rtnl_lock() during probe()
net/mlx5: Update the list of the PCI supported devices
hv_netvsc: Set VF priv_flags to IFF_NO_ADDRCONF before open to prevent IPv6 addrconf
phonet/pep: Move call to pn_skb_get_dst_sockaddr() earlier in pep_sock_accept()
Bluetooth: L2CAP: Fix attempting to adjust outgoing MTU
netfilter: nf_conntrack: fix crash due to removal of uninitialised entry
net: fix segmentation after TCP/UDP fraglist GRO
ipv6: mcast: Delay put pmc->idev in mld_del_delrec()
net: airoha: fix potential use-after-free in airoha_npu_get()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address three issues introduced during the current development
cycle and related to system suspend and hibernation, one triggering
when asynchronous suspend of devices fails, one possibly affecting
memory management in the core suspend code error path, and one due to
duplicate filesystems freezing during system suspend:
- Fix a deadlock that may occur on asynchronous device suspend
failures due to missing completion updates in error paths (Rafael
Wysocki)
- Drop a misplaced pm_restore_gfp_mask() call, which may cause swap
to be accessed too early if system suspend fails, from
suspend_devices_and_enter() (Rafael Wysocki)
- Remove duplicate filesystems_freeze/thaw() calls, which sometimes
cause systems to be unable to resume, from enter_state() (Zihuan
Zhang)"
* tag 'pm-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Update power.completion for all devices on errors
PM: suspend: clean up redundant filesystems_freeze/thaw() handling
PM: suspend: Drop a misplaced pm_restore_gfp_mask() call
|
|
KVM TDX fixes for 6.16
- Fix a formatting goof in the TDX documentation.
- Reject KVM_SET_TSC_KHZ for guests with a protected TSC (currently only TDX).
- Ensure struct kvm_tdx_capabilities fields that are not explicitly set by KVM
are zeroed.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: fix connectable extended advertising when using static random address
- hci_core: fix typos in macros
- hci_core: add missing braces when using macro parameters
- hci_core: replace 'quirks' integer by 'quirk_flags' bitmap
- SMP: If an unallowed command is received consider it a failure
- SMP: Fix using HCI_ERROR_REMOTE_USER_TERM on timeout
- L2CAP: Fix null-ptr-deref in l2cap_sock_resume_cb()
- L2CAP: Fix attempting to adjust outgoing MTU
- btintel: Check if controller is ISO capable on btintel_classify_pkt_type
- btusb: QCA: Fix downloading wrong NVM for WCN6855 GF variant without board ID
* tag 'for-net-2025-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix attempting to adjust outgoing MTU
Bluetooth: btusb: QCA: Fix downloading wrong NVM for WCN6855 GF variant without board ID
Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmap
Bluetooth: hci_core: add missing braces when using macro parameters
Bluetooth: hci_core: fix typos in macros
Bluetooth: SMP: Fix using HCI_ERROR_REMOTE_USER_TERM on timeout
Bluetooth: SMP: If an unallowed command is received consider it a failure
Bluetooth: btintel: Check if controller is ISO capable on btintel_classify_pkt_type
Bluetooth: hci_sync: fix connectable extended advertising when using static random address
Bluetooth: Fix null-ptr-deref in l2cap_sock_resume_cb()
====================
Link: https://patch.msgid.link/20250717142849.537425-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
David Howells says:
====================
rxrpc: Miscellaneous fixes
Here are some fixes for rxrpc:
(1) Fix the calling of IP routing code with IRQs disabled.
(2) Fix a recvmsg/recvmsg race when the first completes a call.
(3) Fix a race between notification, recvmsg and sendmsg releasing a call.
(4) Fix abort of abort.
(5) Fix call-level aborts that should be connection-level aborts.
====================
Link: https://patch.msgid.link/20250717074350.3767366-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix rxrpc to use connection-level aborts for things that affect the whole
connection, such as the service ID not matching a local service.
Fixes: 57af281e5389 ("rxrpc: Tidy up abort generation infrastructure")
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250717074350.3767366-6-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Under some circumstances, such as when a server socket is closing, ABORT
packets will be generated in response to incoming packets. Unfortunately,
this also may include generating aborts in response to incoming aborts -
which may cause a cycle. It appears this may be made possible by giving
the client a multicast address.
Fix this such that rxrpc_reject_packet() will refuse to generate aborts in
response to aborts.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250717074350.3767366-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a call is released, rxrpc takes the spinlock and removes it from
->recvmsg_q in an effort to prevent racing recvmsg() invocations from
seeing the same call. Now, rxrpc_recvmsg() only takes the spinlock when
actually removing a call from the queue; it doesn't, however, take it in
the lead up to that when it checks to see if the queue is empty. It *does*
hold the socket lock, which prevents a recvmsg/recvmsg race - but this
doesn't prevent sendmsg from ending the call because sendmsg() drops the
socket lock and relies on the call->user_mutex.
Fix this by firstly removing the bit in rxrpc_release_call() that dequeues
the released call and, instead, rely on recvmsg() to simply discard
released calls (done in a preceding fix).
Secondly, rxrpc_notify_socket() is abandoned if the call is already marked
as released rather than trying to be clever by setting both pointers in
call->recvmsg_link to NULL to trick list_empty(). This isn't perfect and
can still race, resulting in a released call on the queue, but recvmsg()
will now clean that up.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250717074350.3767366-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a call receives an event (such as incoming data), the call gets placed
on the socket's queue and a thread in recvmsg can be awakened to go and
process it. Once the thread has picked up the call off of the queue,
further events will cause it to be requeued, and once the socket lock is
dropped (recvmsg uses call->user_mutex to allow the socket to be used in
parallel), a second thread can come in and its recvmsg can pop the call off
the socket queue again.
In such a case, the first thread will be receiving stuff from the call and
the second thread will be blocked on call->user_mutex. The first thread
can, at this point, process both the event that it picked call for and the
event that the second thread picked the call for and may see the call
terminate - in which case the call will be "released", decoupling the call
from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control
message).
The first thread will return okay, but then the second thread will wake up
holding the user_mutex and, if it sees that the call has been released by
the first thread, it will BUG thusly:
kernel BUG at net/rxrpc/recvmsg.c:474!
Fix this by just dequeuing the call and ignoring it if it is seen to be
already released. We can't tell userspace about it anyway as the user call
ID has become stale.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Reported-by: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250717074350.3767366-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rxrpc_assess_MTU_size() function calls down into the IP layer to find
out the MTU size for a route. When accepting an incoming call, this is
called from rxrpc_new_incoming_call() which holds interrupts disabled
across the code that calls down to it. Unfortunately, the IP layer uses
local_bh_enable() which, config dependent, throws a warning if IRQs are
enabled:
WARNING: CPU: 1 PID: 5544 at kernel/softirq.c:387 __local_bh_enable_ip+0x43/0xd0
...
RIP: 0010:__local_bh_enable_ip+0x43/0xd0
...
Call Trace:
<TASK>
rt_cache_route+0x7e/0xa0
rt_set_nexthop.isra.0+0x3b3/0x3f0
__mkroute_output+0x43a/0x460
ip_route_output_key_hash+0xf7/0x140
ip_route_output_flow+0x1b/0x90
rxrpc_assess_MTU_size.isra.0+0x2a0/0x590
rxrpc_new_incoming_peer+0x46/0x120
rxrpc_alloc_incoming_call+0x1b1/0x400
rxrpc_new_incoming_call+0x1da/0x5e0
rxrpc_input_packet+0x827/0x900
rxrpc_io_thread+0x403/0xb60
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
...
hardirqs last enabled at (23): _raw_spin_unlock_irq+0x24/0x50
hardirqs last disabled at (24): _raw_read_lock_irq+0x17/0x70
softirqs last enabled at (0): copy_process+0xc61/0x2730
softirqs last disabled at (25): rt_add_uncached_list+0x3c/0x90
Fix this by moving the call to rxrpc_assess_MTU_size() out of
rxrpc_init_peer() and further up the stack where it can be done without
interrupts disabled.
It shouldn't be a problem for rxrpc_new_incoming_call() to do it after the
locks are dropped as pmtud is going to be performed by the I/O thread - and
we're in the I/O thread at this point.
Fixes: a2ea9a907260 ("rxrpc: Use irq-disabling spinlocks between app and I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Junvyyang, Tencent Zhuque Lab <zhuque@tencent.com>
cc: LePremierHomme <kwqcheii@proton.me>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250717074350.3767366-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure that any deactivation and row emptying that occurs
during htb_dequeue_tree does not cause a kernel panic.
This scenario originally triggered a kernel BUG_ON, and
we are checking for a graceful fail now.
Signed-off-by: William Liu <will@willsroot.io>
Signed-off-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250717022912.221426-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
htb_lookup_leaf has a BUG_ON that can trigger with the following:
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: htb default 1
tc class add dev lo parent 1: classid 1:1 htb rate 64bit
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2:1 handle 3: blackhole
ping -I lo -c1 -W0.001 127.0.0.1
The root cause is the following:
1. htb_dequeue calls htb_dequeue_tree which calls the dequeue handler on
the selected leaf qdisc
2. netem_dequeue calls enqueue on the child qdisc
3. blackhole_enqueue drops the packet and returns a value that is not
just NET_XMIT_SUCCESS
4. Because of this, netem_dequeue calls qdisc_tree_reduce_backlog, and
since qlen is now 0, it calls htb_qlen_notify -> htb_deactivate ->
htb_deactiviate_prios -> htb_remove_class_from_row -> htb_safe_rb_erase
5. As this is the only class in the selected hprio rbtree,
__rb_change_child in __rb_erase_augmented sets the rb_root pointer to
NULL
6. Because blackhole_dequeue returns NULL, netem_dequeue returns NULL,
which causes htb_dequeue_tree to call htb_lookup_leaf with the same
hprio rbtree, and fail the BUG_ON
The function graph for this scenario is shown here:
0) | htb_enqueue() {
0) + 13.635 us | netem_enqueue();
0) 4.719 us | htb_activate_prios();
0) # 2249.199 us | }
0) | htb_dequeue() {
0) 2.355 us | htb_lookup_leaf();
0) | netem_dequeue() {
0) + 11.061 us | blackhole_enqueue();
0) | qdisc_tree_reduce_backlog() {
0) | qdisc_lookup_rcu() {
0) 1.873 us | qdisc_match_from_root();
0) 6.292 us | }
0) 1.894 us | htb_search();
0) | htb_qlen_notify() {
0) 2.655 us | htb_deactivate_prios();
0) 6.933 us | }
0) + 25.227 us | }
0) 1.983 us | blackhole_dequeue();
0) + 86.553 us | }
0) # 2932.761 us | qdisc_warn_nonwc();
0) | htb_lookup_leaf() {
0) | BUG_ON();
------------------------------------------
The full original bug report can be seen here [1].
We can fix this just by returning NULL instead of the BUG_ON,
as htb_dequeue_tree returns NULL when htb_lookup_leaf returns
NULL.
[1] https://lore.kernel.org/netdev/pF5XOOIim0IuEfhI-SOxTgRvNoDwuux7UHKnE_Y5-zVd4wmGvNk2ceHjKb8ORnzw0cGwfmVu42g9dL7XyJLf1NEzaztboTWcm0Ogxuojoeo=@willsroot.io/
Fixes: 512bb43eb542 ("pkt_sched: sch_htb: Optimize WARN_ONs in htb_dequeue_tree() etc.")
Signed-off-by: William Liu <will@willsroot.io>
Signed-off-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250717022816.221364-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Do not offload IGMP/MLD messages as it could lead to IGMP/MLD Reports
being unintentionally flooded to Hosts. Instead, let the bridge decide
where to send these IGMP/MLD messages.
Consider the case where the local host is sending out reports in response
to a remote querier like the following:
mcast-listener-process (IP_ADD_MEMBERSHIP)
\
br0
/ \
swp1 swp2
| |
QUERIER SOME-OTHER-HOST
In the above setup, br0 will want to br_forward() reports for
mcast-listener-process's group(s) via swp1 to QUERIER; but since the
source hwdom is 0, the report is eligible for tx offloading, and is
flooded by hardware to both swp1 and swp2, reaching SOME-OTHER-HOST as
well. (Example and illustration provided by Tobias.)
Fixes: 472111920f1c ("net: bridge: switchdev: allow the TX data plane forwarding to be offloaded")
Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250716153551.1830255-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'net-vlan-fix-vlan-0-refcount-imbalance-of-toggling-filtering-during-runtime'
Dong Chenchen says:
====================
net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime
Fix VLAN 0 refcount imbalance of toggling filtering during runtime.
====================
Link: https://patch.msgid.link/20250716034504.2285203-1-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test cases for vlan_filter modification during runtime, which
may triger null-ptr-ref or memory leak of vlan0.
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Link: https://patch.msgid.link/20250716034504.2285203-3-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Assuming the "rx-vlan-filter" feature is enabled on a net device, the
8021q module will automatically add or remove VLAN 0 when the net device
is put administratively up or down, respectively. There are a couple of
problems with the above scheme.
The first problem is a memory leak that can happen if the "rx-vlan-filter"
feature is disabled while the device is running:
# ip link add bond1 up type bond mode 0
# ethtool -K bond1 rx-vlan-filter off
# ip link del dev bond1
When the device is put administratively down the "rx-vlan-filter"
feature is disabled, so the 8021q module will not remove VLAN 0 and the
memory will be leaked [1].
Another problem that can happen is that the kernel can automatically
delete VLAN 0 when the device is put administratively down despite not
adding it when the device was put administratively up since during that
time the "rx-vlan-filter" feature was disabled. null-ptr-unref or
bug_on[2] will be triggered by unregister_vlan_dev() for refcount
imbalance if toggling filtering during runtime:
$ ip link add bond0 type bond mode 0
$ ip link add link bond0 name vlan0 type vlan id 0 protocol 802.1q
$ ethtool -K bond0 rx-vlan-filter off
$ ifconfig bond0 up
$ ethtool -K bond0 rx-vlan-filter on
$ ifconfig bond0 down
$ ip link del vlan0
Root cause is as below:
step1: add vlan0 for real_dev, such as bond, team.
register_vlan_dev
vlan_vid_add(real_dev,htons(ETH_P_8021Q),0) //refcnt=1
step2: disable vlan filter feature and enable real_dev
step3: change filter from 0 to 1
vlan_device_event
vlan_filter_push_vids
ndo_vlan_rx_add_vid //No refcnt added to real_dev vlan0
step4: real_dev down
vlan_device_event
vlan_vid_del(dev, htons(ETH_P_8021Q), 0); //refcnt=0
vlan_info_rcu_free //free vlan0
step5: delete vlan0
unregister_vlan_dev
BUG_ON(!vlan_info); //vlan_info is null
Fix both problems by noting in the VLAN info whether VLAN 0 was
automatically added upon NETDEV_UP and based on that decide whether it
should be deleted upon NETDEV_DOWN, regardless of the state of the
"rx-vlan-filter" feature.
[1]
unreferenced object 0xffff8880068e3100 (size 256):
comm "ip", pid 384, jiffies 4296130254
hex dump (first 32 bytes):
00 20 30 0d 80 88 ff ff 00 00 00 00 00 00 00 00 . 0.............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 81ce31fa):
__kmalloc_cache_noprof+0x2b5/0x340
vlan_vid_add+0x434/0x940
vlan_device_event.cold+0x75/0xa8
notifier_call_chain+0xca/0x150
__dev_notify_flags+0xe3/0x250
rtnl_configure_link+0x193/0x260
rtnl_newlink_create+0x383/0x8e0
__rtnl_newlink+0x22c/0xa40
rtnl_newlink+0x627/0xb00
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
[2]
kernel BUG at net/8021q/vlan.c:99!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 382 Comm: ip Not tainted 6.16.0-rc3 #61 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:unregister_vlan_dev (net/8021q/vlan.c:99 (discriminator 1))
RSP: 0018:ffff88810badf310 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88810da84000 RCX: ffffffffb47ceb9a
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88810e8b43c8
RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6cefe80
R10: ffffffffb677f407 R11: ffff88810badf3c0 R12: ffff88810e8b4000
R13: 0000000000000000 R14: ffff88810642a5c0 R15: 000000000000017e
FS: 00007f1ff68c20c0(0000) GS:ffff888163a24000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1ff5dad240 CR3: 0000000107e56000 CR4: 00000000000006f0
Call Trace:
<TASK>
rtnl_dellink (net/core/rtnetlink.c:3511 net/core/rtnetlink.c:3553)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6945)
netlink_rcv_skb (net/netlink/af_netlink.c:2535)
netlink_unicast (net/netlink/af_netlink.c:1314 net/netlink/af_netlink.c:1339)
netlink_sendmsg (net/netlink/af_netlink.c:1883)
____sys_sendmsg (net/socket.c:712 net/socket.c:727 net/socket.c:2566)
___sys_sendmsg (net/socket.c:2622)
__sys_sendmsg (net/socket.c:2652)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
Fixes: ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)")
Reported-by: syzbot+a8b046e462915c65b10b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a8b046e462915c65b10b
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250716034504.2285203-2-dongchenchen2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Antonio Quartulli says:
====================
This bugfix batch includes the following changes:
* properly propagate sk mark to skb->mark field
* reject unexpected incoming netlink attributes
* reset GSO state when moving skb from transport to tunnel layer
* tag 'ovpn-net-20250716' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: reset GSO metadata after decapsulation
ovpn: reject unexpected netlink attributes
ovpn: propagate socket mark to skb in UDP
====================
Link: https://patch.msgid.link/20250716115443.16763-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After recent changes in net-next TCP compacts skbs much more
aggressively. This unearthed a bug in TLS where we may try
to operate on an old skb when checking if all skbs in the
queue have matching decrypt state and geometry.
BUG: KASAN: slab-use-after-free in tls_strp_check_rcv+0x898/0x9a0 [tls]
(net/tls/tls_strp.c:436 net/tls/tls_strp.c:530 net/tls/tls_strp.c:544)
Read of size 4 at addr ffff888013085750 by task tls/13529
CPU: 2 UID: 0 PID: 13529 Comm: tls Not tainted 6.16.0-rc5-virtme
Call Trace:
kasan_report+0xca/0x100
tls_strp_check_rcv+0x898/0x9a0 [tls]
tls_rx_rec_wait+0x2c9/0x8d0 [tls]
tls_sw_recvmsg+0x40f/0x1aa0 [tls]
inet_recvmsg+0x1c3/0x1f0
Always reload the queue, fast path is to have the record in the queue
when we wake, anyway (IOW the path going down "if !strp->stm.full_len").
Fixes: 0d87bbd39d7f ("tls: strp: make sure the TCP skbs do not have overlapping data")
Link: https://patch.msgid.link/20250716143850.1520292-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The deadlock appears in a stack trace like:
virtnet_probe()
rtnl_lock()
virtio_config_changed_work()
netdev_notify_peers()
rtnl_lock()
It happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while the
virtio-net driver is still probing.
The config_work in probe() will get scheduled until virtnet_open() enables
the config change notification via virtio_config_driver_enable().
Fixes: df28de7b0050 ("virtio-net: synchronize operstate with admin state on up/down")
Signed-off-by: Zigit Zo <zuozhijie@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250716115717.1472430-1-zuozhijie@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
