| Age | Commit message (Collapse) | Author |
|---|
|
Add the upcoming ConnectX-10 device ID to the table of supported
PCI device IDs.
Cc: stable@vger.kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752650969-148501-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
addrconf
Set an additional flag IFF_NO_ADDRCONF to prevent ipv6 addrconf.
Commit under Fixes added a new flag change that was not made
to hv_netvsc resulting in the VF being assinged an IPv6.
Fixes: 8a321cf7becc ("net: add IFF_NO_ADDRCONF and use it in bonding to prevent ipv6 addrconf")
Suggested-by: Cathy Avery <cavery@redhat.com>
Signed-off-by: Li Tian <litian@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250716002607.4927-1-litian@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A new warning in clang [1] points out a place in pep_sock_accept() where
dst is uninitialized then passed as a const pointer to pep_find_pipe():
net/phonet/pep.c:829:37: error: variable 'dst' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
829 | newsk = pep_find_pipe(&pn->hlist, &dst, pipe_handle);
| ^~~:
Move the call to pn_skb_get_dst_sockaddr(), which initializes dst, to
before the call to pep_find_pipe(), so that dst is consistently used
initialized throughout the function.
Cc: stable@vger.kernel.org
Fixes: f7ae8d59f661 ("Phonet: allocate sock from accept syscall rather than soft IRQ")
Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2101
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20250715-net-phonet-fix-uninit-const-pointer-v1-1-8efd1bd188b3@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Configuration request only configure the incoming direction of the peer
initiating the request, so using the MTU is the other direction shall
not be used, that said the spec allows the peer responding to adjust:
Bluetooth Core 6.1, Vol 3, Part A, Section 4.5
'Each configuration parameter value (if any is present) in an
L2CAP_CONFIGURATION_RSP packet reflects an ‘adjustment’ to a
configuration parameter value that has been sent (or, in case of
default values, implied) in the corresponding
L2CAP_CONFIGURATION_REQ packet.'
That said adjusting the MTU in the response shall be limited to ERTM
channels only as for older modes the remote stack may not be able to
detect the adjustment causing it to silently drop packets.
Link: https://github.com/bluez/bluez/issues/1422
Link: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/149
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/4793
Fixes: 042bb9603c44 ("Bluetooth: L2CAP: Fix L2CAP MTU negotiation")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Remove TDVMCALLINFO_GET_QUOTE from user_tdvmcallinfo_1_r11 reported to
userspace to align with the direction of the GHCI spec.
Recently, concern was raised about a gap in the GHCI spec that left
ambiguity in how to expose to the guest that only a subset of GHCI
TDVMCalls were supported. During the back and forth on the spec details[0],
<GetQuote> was moved from an individually enumerable TDVMCall, to one that
is part of the 'base spec', meaning it doesn't have a specific bit in the
<GetTDVMCallInfo> return values. Although the spec[1] is still in draft
form, the GetQoute part has been agreed by the major TDX VMMs.
Unfortunately the commits that were upstreamed still treat <GetQuote> as
individually enumerable. They set bit 0 in the user_tdvmcallinfo_1_r11
which is reported to userspace to tell supported optional TDVMCalls,
intending to say that <GetQuote> is supported.
So stop reporting <GetQute> in user_tdvmcallinfo_1_r11 to align with
the direction of the spec, and allow some future TDVMCall to use that bit.
[0] https://lore.kernel.org/all/aEmuKII8FGU4eQZz@google.com/
[1] https://cdrdv2.intel.com/v1/dl/getContent/858626
Fixes: 28224ef02b56 ("KVM: TDX: Report supported optional TDVMCALLs in TDX capabilities")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250717022010.677645-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Sebastian Andrzej Siewior says:
====================
ppp: Replace per-CPU recursion counter with lock-owner field
This is another approach to avoid relying on local_bh_disable() for
locking of per-CPU in ppp.
I redid it with the per-CPU lock and local_lock_nested_bh() as discussed
in v1. The xmit_recursion counter has been removed since it served the
same purpose as the owner field. Both were updated and checked.
The xmit_recursion looks like a counter in ppp_channel_push() but at
this point, the counter should always be 0 so it always serves as a
boolean. Therefore I removed it.
I do admit that this looks easier to review.
v2 https://lore.kernel.org/all/20250710162403.402739-1-bigeasy@linutronix.de/
v1 https://lore.kernel.org/all/20250627105013.Qtv54bEk@linutronix.de/
====================
Link: https://patch.msgid.link/20250715150806.700536-1-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The per-CPU variable ppp::xmit_recursion is protecting against recursion
due to wrong configuration of the ppp unit. The per-CPU variable
relies on disabled BH for its locking. Without per-CPU locking in
local_bh_disable() on PREEMPT_RT this data structure requires explicit
locking.
The ppp::xmit_recursion is used as a per-CPU boolean. The counter is
checked early in the send routing and the transmit path is only entered
if the counter is zero. Then the counter is incremented to avoid
recursion. It used to detect recursion on channel::downl and
ppp::wlock.
Create a struct ppp_xmit_recursion and move the counter into it.
Add local_lock_t to the struct and use local_lock_nested_bh() for
locking. Due to possible nesting, the lock cannot be acquired
unconditionally but it requires an owner field to identify recursion
before attempting to acquire the lock.
The counter is incremented and checked only after the lock is acquired.
Since it functions as a boolean rather than a count, and its role is now
superseded by the owner field, it can be safely removed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250715150806.700536-2-bigeasy@linutronix.de
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ivan Vecera says:
====================
dpll: zl3073x: Add misc features
Add several new features missing in initial submission:
* Embedded sync for both pin types
* Phase offset reporting for connected input pin
* Selectable phase offset monitoring (aka all inputs phase monitor)
* Phase adjustments for both pin types
* Fractional frequency offset reporting for input pins
Everything was tested on Microchip EVB-LAN9668 EDS2 development board.
====================
Link: https://patch.msgid.link/20250715144633.149156-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Adds support to get fractional frequency offset for input pins. Implement
the appropriate callback and function that periodicaly performs reference
frequency measurement and notifies DPLL core about changes.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-6-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support to get/set phase adjustment for both input and output pins.
The phase adjustment is implemented using reference and output phase
offset compensation registers. For input pins the adjustment value can
be arbitrary number but for outputs the value has to be a multiple
of half synthesizer clock cycles.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-5-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Implement phase offset monitor feature to allow a user to monitor
phase offsets across all available inputs.
The device firmware periodically performs phase offsets measurements for
all available DPLL channels and input references. The driver can ask
the firmware to fill appropriate latch registers with measured values.
There are 2 sets of latch registers for phase offsets reporting:
1) DPLL-to-connected-ref: up to 5 registers that contain values for
phase offset between particular DPLL channel and its connected input
reference.
2) selected-DPLL-to-ref: 10 registers that contain values for phase
offsets between selected DPLL channel and all available input
references.
Both are filled with single read request so the driver can read
DPLL-to-connected-ref phase offset for all DPLL channels at once.
This was implemented in the previous patch.
To read selected-DPLL-to-ref registers for all DPLLs a separate read
request has to be sent to device firmware for each DPLL channel.
To implement phase offset monitor feature:
* Extend zl3073x_ref_phase_offsets_update() to select given DPLL channel
in phase offset read request. The caller can set channel==-1 if it
will not read Type2 registers.
* Use this extended function to update phase offset latch registers
during zl3073x_dpll_changes_check() call if phase monitor is enabled
* Extend zl3073x_dpll_pin_phase_offset_check() to check phase offset
changes for all available input references
* Extend zl3073x_dpll_input_pin_phase_offset_get() to report phase
offset values for all available input references
* Implement phase offset monitor callbacks to enable/disable this
feature
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support to get phase offset for the connected input pin. Implement
the appropriate callback and function that performs DPLL to connected
reference phase error measurement and notifies DPLL core about changes.
The measurement is performed internally by device on background 40 times
per second but the measured value is read each second and compared with
previous value.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-3-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add support to get/set embedded sync for both input and output pins.
The DPLL is able to lock on input reference when the embedded sync
frequency is 1 PPS and pulse width 25%. The esync on outputs are more
versatille and theoretically supports any esync frequency that divides
current output frequency but for now support the same that supported on
input pins (1 PPS & 25% pulse).
Note that for the output pins the esync divisor shares the same register
used for N-divided signal formats. Due to this the esync cannot be
enabled on outputs configured with one of the N-divided signal formats.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another set of changes, notably:
- cfg80211: fix double-free introduced earlier
- mac80211: fix RCU iteration in CSA
- iwlwifi: many cleanups (unused FW APIs, PCIe code, WoWLAN)
- mac80211: some work around how FIPS affects wifi, which was
wrong (RC4 is used by TKIP, not only WEP)
- cfg/mac80211: improvements for unsolicated probe response
handling
* tag 'wireless-next-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (64 commits)
wifi: cfg80211: fix double free for link_sinfo in nl80211_station_dump()
wifi: cfg80211: fix off channel operation allowed check for MLO
wifi: mac80211: use RCU-safe iteration in ieee80211_csa_finish
wifi: mac80211_hwsim: Update comments in header
wifi: mac80211: parse unsolicited broadcast probe response data
wifi: cfg80211: parse attribute to update unsolicited probe response template
wifi: mac80211: don't use TPE data from assoc response
wifi: mac80211: handle WLAN_HT_ACTION_NOTIFY_CHANWIDTH async
wifi: mac80211: simplify __ieee80211_rx_h_amsdu() loop
wifi: mac80211: don't mark keys for inactive links as uploaded
wifi: mac80211: only assign chanctx in reconfig
wifi: mac80211_hwsim: Declare support for AP scanning
wifi: mac80211: clean up cipher suite handling
wifi: mac80211: don't send keys to driver when fips_enabled
wifi: cfg80211: Fix interface type validation
wifi: mac80211: remove ieee80211_link_unreserve_chanctx() return value
wifi: mac80211: don't unreserve never reserved chanctx
mwl8k: Add missing check after DMA map
wifi: mac80211: make VHT opmode NSS ignore a debug message
wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions
...
====================
Link: https://patch.msgid.link/20250717094610.20106-47-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A relatively large set of changes, but most of them are quirk
information for various x86 systems. There is one more substantial fix
for a NULL pointer dereference when removing the AVS driver, plus one
for Kconfig dependencies.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- ath12k performance regression from -rc1
- cfg80211 counted_by() removal for scan request
as it doesn't match usage and keeps complaining
- iwlwifi crash with certain older devices
- iwlwifi missing an error path unlock
- iwlwifi compatibility with certain BIOS updates
* tag 'wireless-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix botched indexing conversion
wifi: cfg80211: remove scan request n_channels counted_by
wifi: ath12k: Fix packets received in WBM error ring with REO LUT enabled
wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap
wifi: iwlwifi: pcie: fix locking on invalid TOP reset
====================
Link: https://patch.msgid.link/20250717091831.18787-5-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If we reload the GuC due to suspend/resume or GT reset then we
have to resend not only any VFs provisioning data, but also PF
configuration, like scheduling parameters (EQ, PT), as otherwise
GuC will continue to use default values.
Fixes: 411220808cee ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-3-michal.wajdeczko@intel.com
(cherry picked from commit 1c38dd6afa4a8ecce28e94da794fd1d205c30f51)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
As part of the resume or GT reset, the PF driver schedules work
which is then used to complete restarting of the SR-IOV support,
including resending to the GuC configurations of provisioned VFs.
However, in case of short delay between those two actions, which
could be seen by triggering a GT reset on the suspened device:
$ echo 1 > /sys/kernel/debug/dri/0000:00:02.0/gt0/force_reset
this PF worker might be still busy, which lead to errors due to
just stopped or disabled GuC CTB communication:
[ ] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT0: resumed
[ ] xe 0000:00:02.0: [drm] GT0: trying reset from force_reset_show [xe]
[ ] xe 0000:00:02.0: [drm] GT0: reset queued
[ ] xe 0000:00:02.0: [drm] GT0: reset started
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel stopped
[ ] xe 0000:00:02.0: [drm:guc_ct_send_recv [xe]] GT0: H2G request 0x5503 canceled!
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 12 config KLVs (-ECANCELED)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 configuration (-ECANCELED)
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 12 config KLVs (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 configuration (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push 2 of 2 VFs configurations
[ ] xe 0000:00:02.0: [drm:pf_worker_restart_func [xe]] GT0: PF: restart completed
While this VFs reprovisioning will be successful during next spin
of the worker, to avoid those errors, make sure to cancel restart
worker if we are about to trigger next reset.
Fixes: 411220808cee ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-2-michal.wajdeczko@intel.com
(cherry picked from commit 9f50b729dd61dfb9f4d7c66900d22a7c7353a8c0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The check would fail if the address is unaligned, but not when
accounting the offset. Instead of `buf | offset` it should have
been `buf + offset`. To make it more readable and also drop the
uintptr_t, just use the IS_ALIGNED() macro.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250710-migrate-aligned-v1-1-44003ef3c078@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 81e139db6900503a2e68009764054fad128fbf95)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
We need the topology to determine GT page fault queue size, move page
fault init after topology init.
Cc: stable@vger.kernel.org
Fixes: 3338e4f90c14 ("drm/xe: Use topology to determine page fault queue size")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250710191208.1040215-1-matthew.brost@intel.com
(cherry picked from commit beb72acb5b38dbe670d8eb752d1ad7a32f9c4119)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
MOCS uc_index is used even before it is initialized in the following
callstack
guc_prepare_xfer()
__xe_guc_upload()
xe_guc_min_load_for_hwconfig()
xe_uc_init_hwconfig()
xe_gt_init_hwconfig()
Do MOCS index initialization earlier in the device probe.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Link: https://lore.kernel.org/r/20250520142445.2792824-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 241cc827c0987d7173714fc5a95a7c8fc9bf15c0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Three patches to enhance conntrack selftests for resize and clash
resolution, from Florian Westphal.
2) Expand nft_concat_range.sh selftest to improve coverage from error
path, from Florian Westphal.
3) Hide clash bit to userspace from netlink dumps until there is a
good reason to expose, from Florian Westphal.
4) Revert notification for device registration/unregistration for
nftables basechains and flowtables, we decided to go for a better
way to handle this through the nfnetlink_hook infrastructure which
will come via nf-next, patch from Phil Sutter.
5) Fix crash in conntrack due to race related to SLAB_TYPESAFE_BY_RCU
that results in removing a recycled object that is not yet in the
hashes. Move IPS_CONFIRM setting after the object is in the hashes.
From Florian Westphal.
netfilter pull request 25-07-17
* tag 'nf-25-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack: fix crash due to removal of uninitialised entry
Revert "netfilter: nf_tables: Add notifications for hook changes"
netfilter: nf_tables: hide clash bit from userspace
selftests: netfilter: nft_concat_range.sh: send packets to empty set
selftests: netfilter: conntrack_resize.sh: also use udpclash tool
selftests: netfilter: add conntrack clash resolution test case
selftests: netfilter: conntrack_resize.sh: extend resize test
====================
Link: https://patch.msgid.link/20250717095808.41725-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After we do the modification on the host side, ensure we write the
result back to VRAM and not the other way around, otherwise the
modification will be lost if treated like a read.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250710134128.800756-2-matthew.auld@intel.com
(cherry picked from commit c12fe703cab93f9d8bfe0ff32b58e7b1fd52be1f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Skipping TLB invalidations on VF causing unrecoverable
faults. Probable reason for skipping TLB invalidations
on SRIOV could be lack of support for instruction
MI_FLUSH_DW_STORE_INDEX. Add back TLB flush with some
additional handling.
Helps in resolving,
[ 704.913454] xe 0000:00:02.1: [drm:pf_queue_work_func [xe]]
ASID: 0
VFID: 0
PDATA: 0x0d92
Faulted Address: 0x0000000002fa0000
FaultType: 0
AccessType: 1
FaultLevel: 0
EngineClass: 3 bcs
EngineInstance: 8
[ 704.913551] xe 0000:00:02.1: [drm:pf_queue_work_func [xe]] Fault response: Unsuccessful -22
V2:
- Use Xmas tree (MichalW)
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 97515d0b3ed92 ("drm/xe/vf: Don't emit access to Global HWSP if VF")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710045945.1023840-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit b528e896fa570844d654b5a4617a97fa770a1030)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Pull NVMe fixes from Christoph:
"- revert the cross-controller atomic write size validation that caused
regressions (Christoph Hellwig)
- fix endianness of command word prints in nvme_log_err_passthru()
(John Garry)
- fix callback lock for TLS handshake (Maurizio Lombardi)
- fix misaccounting of nvme-mpath inflight I/O (Yu Kuai)
- fix inconsistent RCU list manipulation in nvme_ns_add_to_ctrl_list()
(Zheng Qixing)"
* tag 'nvme-6.16-2025-07-17' of git://git.infradead.org/nvme:
nvmet-tcp: fix callback lock for TLS handshake
nvme: fix misaccounting of nvme-mpath inflight I/O
nvme: revert the cross-controller atomic write size validation
nvme: fix endianness of command word prints in nvme_log_err_passthru()
nvme: fix inconsistent RCU list manipulation in nvme_ns_add_to_ctrl_list()
|
|
Synopsys DesignWare XPCS CSR clock is optional,
so it is better to use devm_clk_get_optional
instead of devm_clk_get.
Signed-off-by: Jack Ping CHNG <jchng@maxlinear.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250715021956.3335631-1-jchng@maxlinear.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit e8afa1557f4f963c9a511bd2c6074a941c308685.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-8-tzimmermann@suse.de
|
|
This reverts commit 1a148af06000e545e714fe3210af3d77ff903c11.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-7-tzimmermann@suse.de
|
|
This reverts commit cce16fcd7446dcff7480cd9d2b6417075ed81065.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-6-tzimmermann@suse.de
|
|
This reverts commit f83a9b8c7fd0557b0c50784bfdc1bbe9140c9bf8.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-5-tzimmermann@suse.de
|
|
This reverts commit e91eb3ae415472b28211d7fed07fa283845b311e.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250715155934.150656-4-tzimmermann@suse.de
|
|
This reverts commit aec8a40228acb385d60feec59b54573d307e60f3.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250715155934.150656-3-tzimmermann@suse.de
|
|
This reverts commit 415cb45895f43015515473fbc40563ca5eec9a7c.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250715155934.150656-3-tzimmermann@suse.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux
Tony Nguyen says:
====================
Add RDMA support for Intel IPU E2000 in idpf
Tatyana Nikolova says:
This idpf patch series is the second part of the staged submission for
introducing RDMA RoCEv2 support for the IPU E2000 line of products,
referred to as GEN3.
To support RDMA GEN3 devices, the idpf driver uses common definitions
of the IIDC interface and implements specific device functionality in
iidc_rdma_idpf.h.
The IPU model can host one or more logical network endpoints called
vPorts per PCI function that are flexibly associated with a physical
port or an internal communication port.
Other features as it pertains to GEN3 devices include:
* MMIO learning
* RDMA capability negotiation
* RDMA vectors discovery between idpf and control plane
These patches are split from the submission "Add RDMA support for Intel
IPU E2000 (GEN3)" [1]. The patches have been tested on a range of hosts
and platforms with a variety of general RDMA applications which include
standalone verbs (rping, perftest, etc.), storage and HPC applications.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[1] https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
This idpf patch series is the second part of the staged submission for
introducing RDMA RoCEv2 support for the IPU E2000 line of products,
referred to as GEN3.
To support RDMA GEN3 devices, the idpf driver uses common definitions
of the IIDC interface and implements specific device functionality in
iidc_rdma_idpf.h.
The IPU model can host one or more logical network endpoints called
vPorts per PCI function that are flexibly associated with a physical
port or an internal communication port.
Other features as it pertains to GEN3 devices include:
* MMIO learning
* RDMA capability negotiation
* RDMA vectors discovery between idpf and control plane
These patches are split from the submission "Add RDMA support for Intel
IPU E2000 (GEN3)" [1]. The patches have been tested on a range of hosts
and platforms with a variety of general RDMA applications which include
standalone verbs (rping, perftest, etc.), storage and HPC applications.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[1] https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
IWL reviews:
v3: https://lore.kernel.org/all/20250708210554.1662-1-tatyana.e.nikolova@intel.com/
v2: https://lore.kernel.org/all/20250612220002.1120-1-tatyana.e.nikolova@intel.com/
v1 (split from previous series):
https://lore.kernel.org/all/20250523170435.668-1-tatyana.e.nikolova@intel.com/
v3: https://lore.kernel.org/all/20250207194931.1569-1-tatyana.e.nikolova@intel.com/
RFC v2: https://lore.kernel.org/all/20240824031924.421-1-tatyana.e.nikolova@intel.com/
RFC: https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux:
idpf: implement get LAN MMIO memory regions
idpf: implement IDC vport aux driver MTU change handler
idpf: implement remaining IDC RDMA core callbacks and handlers
idpf: implement RDMA vport auxiliary dev create, init, and destroy
idpf: implement core RDMA auxiliary dev create, init, and destroy
idpf: use reserved RDMA vectors from control plane
====================
Link: https://patch.msgid.link/20250714181002.2865694-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When application A submits jobs and application B submits a job with a
dependency on A's fence, the normal flow wakes up the scheduler after
processing each job. However, the optimization in
drm_sched_entity_add_dependency_cb() uses a callback that only clears
dependencies without waking up the scheduler.
When application A is killed before its jobs can run, the callback gets
triggered but only clears the dependency without waking up the scheduler,
causing the scheduler to enter sleep state and application B to hang.
Remove the optimization by deleting drm_sched_entity_clear_dep() and its
usage, ensuring the scheduler is always woken up when dependencies are
cleared.
Fixes: 777dbd458c89 ("drm/amdgpu: drop a dummy wakeup scheduler")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250717084453.921097-1-lincao12@amd.com
|
|
A crash in conntrack was reported while trying to unlink the conntrack
entry from the hash bucket list:
[exception RIP: __nf_ct_delete_from_lists+172]
[..]
#7 [ff539b5a2b043aa0] nf_ct_delete at ffffffffc124d421 [nf_conntrack]
#8 [ff539b5a2b043ad0] nf_ct_gc_expired at ffffffffc124d999 [nf_conntrack]
#9 [ff539b5a2b043ae0] __nf_conntrack_find_get at ffffffffc124efbc [nf_conntrack]
[..]
The nf_conn struct is marked as allocated from slab but appears to be in
a partially initialised state:
ct hlist pointer is garbage; looks like the ct hash value
(hence crash).
ct->status is equal to IPS_CONFIRMED|IPS_DYING, which is expected
ct->timeout is 30000 (=30s), which is unexpected.
Everything else looks like normal udp conntrack entry. If we ignore
ct->status and pretend its 0, the entry matches those that are newly
allocated but not yet inserted into the hash:
- ct hlist pointers are overloaded and store/cache the raw tuple hash
- ct->timeout matches the relative time expected for a new udp flow
rather than the absolute 'jiffies' value.
If it were not for the presence of IPS_CONFIRMED,
__nf_conntrack_find_get() would have skipped the entry.
Theory is that we did hit following race:
cpu x cpu y cpu z
found entry E found entry E
E is expired <preemption>
nf_ct_delete()
return E to rcu slab
init_conntrack
E is re-inited,
ct->status set to 0
reply tuplehash hnnode.pprev
stores hash value.
cpu y found E right before it was deleted on cpu x.
E is now re-inited on cpu z. cpu y was preempted before
checking for expiry and/or confirm bit.
->refcnt set to 1
E now owned by skb
->timeout set to 30000
If cpu y were to resume now, it would observe E as
expired but would skip E due to missing CONFIRMED bit.
nf_conntrack_confirm gets called
sets: ct->status |= CONFIRMED
This is wrong: E is not yet added
to hashtable.
cpu y resumes, it observes E as expired but CONFIRMED:
<resumes>
nf_ct_expired()
-> yes (ct->timeout is 30s)
confirmed bit set.
cpu y will try to delete E from the hashtable:
nf_ct_delete() -> set DYING bit
__nf_ct_delete_from_lists
Even this scenario doesn't guarantee a crash:
cpu z still holds the table bucket lock(s) so y blocks:
wait for spinlock held by z
CONFIRMED is set but there is no
guarantee ct will be added to hash:
"chaintoolong" or "clash resolution"
logic both skip the insert step.
reply hnnode.pprev still stores the
hash value.
unlocks spinlock
return NF_DROP
<unblocks, then
crashes on hlist_nulls_del_rcu pprev>
In case CPU z does insert the entry into the hashtable, cpu y will unlink
E again right away but no crash occurs.
Without 'cpu y' race, 'garbage' hlist is of no consequence:
ct refcnt remains at 1, eventually skb will be free'd and E gets
destroyed via: nf_conntrack_put -> nf_conntrack_destroy -> nf_ct_destroy.
To resolve this, move the IPS_CONFIRMED assignment after the table
insertion but before the unlock.
Pablo points out that the confirm-bit-store could be reordered to happen
before hlist add resp. the timeout fixup, so switch to set_bit and
before_atomic memory barrier to prevent this.
It doesn't matter if other CPUs can observe a newly inserted entry right
before the CONFIRMED bit was set:
Such event cannot be distinguished from above "E is the old incarnation"
case: the entry will be skipped.
Also change nf_ct_should_gc() to first check the confirmed bit.
The gc sequence is:
1. Check if entry has expired, if not skip to next entry
2. Obtain a reference to the expired entry.
3. Call nf_ct_should_gc() to double-check step 1.
nf_ct_should_gc() is thus called only for entries that already failed an
expiry check. After this patch, once the confirmed bit check passes
ct->timeout has been altered to reflect the absolute 'best before' date
instead of a relative time. Step 3 will therefore not remove the entry.
Without this change to nf_ct_should_gc() we could still get this sequence:
1. Check if entry has expired.
2. Obtain a reference.
3. Call nf_ct_should_gc() to double-check step 1:
4 - entry is still observed as expired
5 - meanwhile, ct->timeout is corrected to absolute value on other CPU
and confirm bit gets set
6 - confirm bit is seen
7 - valid entry is removed again
First do check 6), then 4) so the gc expiry check always picks up either
confirmed bit unset (entry gets skipped) or expiry re-check failure for
re-inited conntrack objects.
This change cannot be backported to releases before 5.19. Without
commit 8a75a2c17410 ("netfilter: conntrack: remove unconfirmed list")
|= IPS_CONFIRMED line cannot be moved without further changes.
Cc: Razvan Cojocaru <rzvncj@gmail.com>
Link: https://lore.kernel.org/netfilter-devel/20250627142758.25664-1-fw@strlen.de/
Link: https://lore.kernel.org/netfilter-devel/4239da15-83ff-4ca4-939d-faef283471bb@gmail.com/
Fixes: 1397af5bfd7d ("netfilter: conntrack: remove the percpu dying list")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Since "net: gro: use cb instead of skb->network_header", the skb network
header is no longer set in the GRO path.
This breaks fraglist segmentation, which relies on ip_hdr()/tcp_hdr()
to check for address/port changes.
Fix this regression by selectively setting the network header for merged
segment skbs.
Fixes: 186b1ea73ad8 ("net: gro: use cb instead of skb->network_header")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250705150622.10699-1-nbd@nbd.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devm_gpiod_put_array() is meant to undo the effects of
devm_gpiod_get_array() - in particular, it should release the GPIOs
contained in the array acquired with the latter. It is meant to be the
resource-managed version of gpiod_put_array(), and it should behave
similar to the non-array version devm_gpiod_put().
Since commit d1d52c6622a6 ("gpiolib: devres: Finish the conversion to
use devm_add_action()") it doesn't do that anymore, it just removes the
devres action and frees associated memory, but it doesn't actually
release the GPIOs.
Fix by switching from devm_remove_action() to devm_release_action(),
which will in addition invoke the action to release the GPIOs.
Fixes: d1d52c6622a6 ("gpiolib: devres: Finish the conversion to use devm_add_action()")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reported-by: Wattson CI <wattson-external@google.com>
Reported-by: Samuel Wu <wusamuel@google.com>
Link: https://lore.kernel.org/r/20250715-gpiolib-devres-put-array-fix-v1-1-970d82a8c887@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec()
does, the reference should be put after ip6_mc_clear_src() return.
Fixes: 63ed8de4be81 ("mld: add mc_lock for protecting per-interface mld data")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250714141957.3301871-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ilya Leoshkevich says:
====================
s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL again
This series fixes a regression causing perf on s390 to trigger a kernel
panic.
Patch 1 fixes the issue, patch 2 adds a test to make sure this doesn't
happen again.
====================
Link: https://patch.msgid.link/20250716194524.48109-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test that invokes a BPF prog in a loop, while concurrently
attaching and detaching another BPF prog to and from it. This helps
identifying race conditions in bpf_arch_text_poke().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250716194524.48109-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 7ded842b356d ("s390/bpf: Fix bpf_plt pointer arithmetic") has
accidentally removed the critical piece of commit c730fce7c70c
("s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL"), causing
intermittent kernel panics in e.g. perf's on_switch() prog to reappear.
Restore the fix and add a comment.
Fixes: 7ded842b356d ("s390/bpf: Fix bpf_plt pointer arithmetic")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250716194524.48109-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Avoid invoking update_locked_rq() when the runqueue (rq) pointer is NULL
in the SCX_CALL_OP and SCX_CALL_OP_RET macros.
Previously, calling update_locked_rq(NULL) with preemption enabled could
trigger the following warning:
BUG: using __this_cpu_write() in preemptible [00000000]
This happens because __this_cpu_write() is unsafe to use in preemptible
context.
rq is NULL when an ops invoked from an unlocked context. In such cases, we
don't need to store any rq, since the value should already be NULL
(unlocked). Ensure that update_locked_rq() is only called when rq is
non-NULL, preventing calling __this_cpu_write() on preemptible context.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Fixes: 18853ba782bef ("sched_ext: Track currently locked rq")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v6.15
|
|
Tariq Toukan says:
====================
net/mlx5e: Add support for PCIe congestion events
Dragos says:
PCIe congestion events are events generated by the firmware when the
device side has sustained PCIe inbound or outbound traffic above
certain thresholds. The high and low threshold are hysteresis thresholds
to prevent flapping: once the high threshold has been reached, a low
threshold event will be triggered only after the bandwidth usage went
below the low threshold.
This series adds support for receiving and exposing such events as
ethtool counters.
2 new pairs of counters are exposed: pci_bw_in/outbound_high/low. These
should help the user understand if the device PCI is under pressure.
Planned followup patches:
- Allow configuration of thresholds through devlink.
- Add ethtool counter for wakeups which did not result in any state
change.
====================
Link: https://patch.msgid.link/1752589821-145787-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the PCIe Congestion Event notifier which triggers a work item
to query the PCIe Congestion Event object. The result of the congestion
state is reflected in the new ethtool stats:
* pci_bw_inbound_high: the device has crossed the high threshold for
inbound PCIe traffic.
* pci_bw_inbound_low: the device has crossed the low threshold for
inbound PCIe traffic
* pci_bw_outbound_high: the device has crossed the high threshold for
outbound PCIe traffic.
* pci_bw_outbound_low: the device has crossed the low threshold for
outbound PCIe traffic
The high and low thresholds are currently configured at 90% and 75%.
These are hysteresis thresholds which help to check if the
PCI bus on the device side is in a congested state.
If low + 1 = high then the device is in a congested state. If low == high
then the device is not in a congested state.
The counters are also documented.
A follow-up patch will make the thresholds configurable.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752589821-145787-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add initial infrastructure to create and destroy the PCIe Congestion
Event object if the object is supported.
The verb for the object creation function is "set" instead of
"create" because the function will accommodate the modify operation
as well in a subsequent patch.
The next patches will hook it up to the event handler and will add
actual functionality.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752589821-145787-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The netiucv driver creates TCP/IP interfaces over IUCV between Linux
guests on z/VM and other z/VM entities.
Rationale for removal:
- NETIUCV connections are only supported for compatibility with
earlier versions and not to be used for new network setups,
since at least Linux kernel 4.0.
- No known active users, use cases, or product dependencies
- The driver is no longer relevant for z/VM networking;
preferred methods include:
* Device pass-through (e.g., OSA, RoCE)
* z/VM Virtual Switch (VSWITCH)
The IUCV mechanism itself remains supported and is actively used
via AF_IUCV, hvc_iucv, and smsg_iucv.
Signed-off-by: Nagamani PV <nagamani@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250715074210.3999296-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ryan Wanner says:
====================
Expose REFCLK for RMII and enable RMII
This set allows the REFCLK property to be exposed as a dt-property to
properly reflect the correct RMII layout. RMII can take an external or
internal provided REFCLK, since this is not SoC dependent but board
dependent this must be exposed as a DT property for the macb driver.
This set also enables RMII mode for the SAMA7 SoCs gigabit mac.
v1: https://lore.kernel.org/cover.1750346271.git.Ryan.Wanner@microchip.com
====================
Link: https://patch.msgid.link/cover.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove USARIO_CLKEN flag since this is now a device tree argument and
not fixed to the SoC.
This will instead be selected by the "cdns,refclk-ext"
device tree property.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/1e7a8c324526f631f279925aa8a6aa937d55c796.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This macro enables the RMII mode bit in the USRIO register when RMII
mode is requested.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/6698836e4ee7df5f6bee181f0d2e38d4b8e4cec2.1752510727.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
