summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-16dmaengine: pl330: _prep_dma_memcpy: Fix wrong burst sizeSugar Zhang
Actually, burst size is equal to '1 << desc->rqcfg.brst_size'. we should use burst size, not desc->rqcfg.brst_size. dma memcpy performance on Rockchip RV1126 @ 1512MHz A7, 1056MHz LPDDR3, 200MHz DMA: dmatest: /# echo dma0chan0 > /sys/module/dmatest/parameters/channel /# echo 4194304 > /sys/module/dmatest/parameters/test_buf_size /# echo 8 > /sys/module/dmatest/parameters/iterations /# echo y > /sys/module/dmatest/parameters/norandom /# echo y > /sys/module/dmatest/parameters/verbose /# echo 1 > /sys/module/dmatest/parameters/run dmatest: dma0chan0-copy0: result #1: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #2: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #3: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #4: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #5: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #6: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #7: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 dmatest: dma0chan0-copy0: result #8: 'test passed' with src_off=0x0 dst_off=0x0 len=0x400000 Before: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 48 iops 200338 KB/s (0) After this patch: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 179 iops 734873 KB/s (0) After this patch and increase dma clk to 400MHz: dmatest: dma0chan0-copy0: summary 8 tests, 0 failures 259 iops 1062929 KB/s (0) Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1605326106-55681-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16dmaengine: ioatdma: remove unused function missed during dma_v2 removalLukas Bulwahn
Commit 7f832645d0e5 ("dmaengine: ioatdma: remove ioatdma v2 registration") missed to remove dca2_tag_map_valid() during its removal. Hence, since then, dca2_tag_map_valid() is unused and make CC=clang W=1 warns: drivers/dma/ioat/dca.c:44:19: warning: unused function 'dca2_tag_map_valid' [-Wunused-function] So, remove this unused function and get rid of a -Wused-function warning. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20201113081248.26416-1-lukas.bulwahn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16perf test: Avoid an msan warning in a copied stack.Ian Rogers
This fix is for a failure that occurred in the DWARF unwind perf test. Stack unwinders may probe memory when looking for frames. Memory sanitizer will poison and track uninitialized memory on the stack, and on the heap if the value is copied to the heap. This can lead to false memory sanitizer failures for the use of an uninitialized value. Avoid this problem by removing the poison on the copied stack. The full msan failure with track origins looks like: ==2168==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x559ceb10755b in handle_cfi elfutils/libdwfl/frame_unwind.c:648:8 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106acf in __libdwfl_frame_reg_set elfutils/libdwfl/frame_unwind.c:77:22 #1 0x559ceb106acf in handle_cfi elfutils/libdwfl/frame_unwind.c:627:13 #2 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #3 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #4 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #5 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #6 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #7 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #8 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #9 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #10 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #11 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #12 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #13 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #14 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #15 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #16 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #17 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #18 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #19 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #20 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #21 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #22 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #23 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #24 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceb106a54 in handle_cfi elfutils/libdwfl/frame_unwind.c:613:9 #1 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #2 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #3 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #4 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #5 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #6 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #7 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #8 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #9 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #10 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #11 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #12 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #13 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #14 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #15 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #16 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #17 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #18 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #19 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #20 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #21 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #22 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #23 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559ceaff8800 in memory_read tools/perf/util/unwind-libdw.c:156:10 #1 0x559ceb10f053 in expr_eval elfutils/libdwfl/frame_unwind.c:501:13 #2 0x559ceb1060cc in handle_cfi elfutils/libdwfl/frame_unwind.c:603:18 #3 0x559ceb105448 in __libdwfl_frame_unwind elfutils/libdwfl/frame_unwind.c:741:4 #4 0x559ceb0ece90 in dwfl_thread_getframes elfutils/libdwfl/dwfl_frame.c:435:7 #5 0x559ceb0ec6b7 in get_one_thread_frames_cb elfutils/libdwfl/dwfl_frame.c:379:10 #6 0x559ceb0ec6b7 in get_one_thread_cb elfutils/libdwfl/dwfl_frame.c:308:17 #7 0x559ceb0ec6b7 in dwfl_getthreads elfutils/libdwfl/dwfl_frame.c:283:17 #8 0x559ceb0ec6b7 in getthread elfutils/libdwfl/dwfl_frame.c:354:14 #9 0x559ceb0ec6b7 in dwfl_getthread_frames elfutils/libdwfl/dwfl_frame.c:388:10 #10 0x559ceaff6ae6 in unwind__get_entries tools/perf/util/unwind-libdw.c:236:8 #11 0x559ceabc9dbc in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:111:8 #12 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #13 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #14 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #15 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #16 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #17 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #18 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #19 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #20 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #21 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #22 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #23 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #24 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #25 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was stored to memory at #0 0x559cea9027d9 in __msan_memcpy llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:1558:3 #1 0x559cea9d2185 in sample_ustack tools/perf/arch/x86/tests/dwarf-unwind.c:41:2 #2 0x559cea9d202c in test__arch_unwind_sample tools/perf/arch/x86/tests/dwarf-unwind.c:72:9 #3 0x559ceabc9cbd in test_dwarf_unwind__thread tools/perf/tests/dwarf-unwind.c:106:6 #4 0x559ceabca5cf in test_dwarf_unwind__compare tools/perf/tests/dwarf-unwind.c:138:26 #5 0x7f812a6865b0 in bsearch (libc.so.6+0x4e5b0) #6 0x559ceabca871 in test_dwarf_unwind__krava_3 tools/perf/tests/dwarf-unwind.c:162:2 #7 0x559ceabca926 in test_dwarf_unwind__krava_2 tools/perf/tests/dwarf-unwind.c:169:9 #8 0x559ceabca946 in test_dwarf_unwind__krava_1 tools/perf/tests/dwarf-unwind.c:174:9 #9 0x559ceabcae12 in test__dwarf_unwind tools/perf/tests/dwarf-unwind.c:211:8 #10 0x559ceabbc4ab in run_test tools/perf/tests/builtin-test.c:418:9 #11 0x559ceabbc4ab in test_and_print tools/perf/tests/builtin-test.c:448:9 #12 0x559ceabbac70 in __cmd_test tools/perf/tests/builtin-test.c:669:4 #13 0x559ceabbac70 in cmd_test tools/perf/tests/builtin-test.c:815:9 #14 0x559cea960e30 in run_builtin tools/perf/perf.c:313:11 #15 0x559cea95fbce in handle_internal_command tools/perf/perf.c:365:8 #16 0x559cea95fbce in run_argv tools/perf/perf.c:409:2 #17 0x559cea95fbce in main tools/perf/perf.c:539:3 Uninitialized value was created by an allocation of 'bf' in the stack frame of function 'perf_event__synthesize_mmap_events' #0 0x559ceafc5f60 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:445 SUMMARY: MemorySanitizer: use-of-uninitialized-value elfutils/libdwfl/frame_unwind.c:648:8 in handle_cfi Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: clang-built-linux@googlegroups.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandeep Dasgupta <sdasgup@google.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20201113182053.754625-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-16dmaengine: idxd: fix mapping of portal sizeDave Jiang
Portal size is 4k. Current code is mapping all 4 portals in a single chunk. Restrict the mapped portal size to a single portal to ensure that submission only goes to the intended portal address. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/160513342642.510187.16450549281618747065.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16perf inject: Fix file corruption due to event deletionAl Grant
"perf inject" can create corrupt files when synthesizing sample events from AUX data. This happens when in the input file, the first event (for the AUX data) has a different sample_type from the second event (generally dummy). Specifically, they differ in the bits that indicate the standard fields appended to perf records in the mmap buffer. "perf inject" deletes the first event and moves up the second event to first position. The problem is with the synthetic PERF_RECORD_MMAP (etc.) events created by "perf record". Since these are synthetic versions of events which are normally produced by the kernel, they have to have the standard fields appended as described by sample_type. "perf record" fills these in with zeroes, including the IDENTIFIER field; perf readers interpret records with zero IDENTIFIER using the descriptor for the first event in the file. Since "perf inject" changes the first event, these synthetic records are then processed with the wrong value of sample_type, and the perf reader reads bad data, reports on incorrect length records etc. Mismatching sample_types are seen with "perf record -e cs_etm//", where the AUX event has TID|TIME|CPU|IDENTIFIER and the dummy event has TID|TIME|IDENTIFIER. Perhaps they could be the same, but it isn't normally a problem if they aren't - perf has no problems reading the file. The sample_types have to agree on the position of IDENTIFIER, because that's how perf finds the right event descriptor in the first place, but they don't normally have to agree on other fields, and perf doesn't check that they do. The problem is specific to the way "perf inject" reorganizes the events and the way synthetic MMAP events are recorded with a zero identifier. A simple solution is to stop "perf inject" deleting the tracing event. Committer testing Removed the now unused 'evsel' variable, update the comment about the evsel removal not being performed anymore, and apply the patch manually as it failed with this warning: warning: Patch sent with format=flowed; space at the end of lines might be lost. Testing it with: $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 8.543 msec (+- 0.130 msec) Average time per event: 0.838 usec (+- 0.013 usec) Average memory usage: 12717 KB (+- 9 KB) Average build-id-all injection took: 5.710 msec (+- 0.058 msec) Average time per event: 0.560 usec (+- 0.006 usec) Average memory usage: 12079 KB (+- 7 KB) $ Signed-off-by: Al Grant <al.grant@arm.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> LPU-Reference: b9cf5611-daae-2390-3439-6617f8f0a34b@foss.arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-11-16Merge tag 'imx-fixes-5.10-4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, round 4: - Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch device work reliably. - Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of the native CSPI_SSI function. - Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match hardware datasheet. - Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board. * tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx50-evk: Fix the chip select 1 IOMUX arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy Link: https://lore.kernel.org/r/20201116090702.GM5849@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-16Merge tag 'renesas-fixes-for-v5.10-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.10 - Add missing audio clock on RZ/G2H. * tag 'renesas-fixes-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a774e1: Add missing audio_clk_b Link: https://lore.kernel.org/r/20201113151229.3924165-1-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-16arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where neededArnd Bergmann
Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-16Merge tag 'linux-can-fixes-for-5.10-20201115' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-15 Anant Thazhemadam contributed two patches for the AF_CAN that prevent potential access of uninitialized member in can_rcv() and canfd_rcv(). The next patch is by Alejandro Concepcion Rodriguez and changes can_restart() to use the correct function to push a skb into the networking stack from process context. Zhang Qilong's patch fixes a memory leak in the error path of the ti_hecc's probe function. A patch by me fixes mcba_usb_start_xmit() function in the mcba_usb driver, to first fill the skb and then pass it to can_put_echo_skb(). Colin Ian King's patch fixes a potential integer overflow on shift in the peak_usb driver. The next two patches target the flexcan driver, a patch by me adds the missing "req_bit" to the stop mode property comment (which was broken during net-next for v5.10). Zhang Qilong's patch fixes the failure handling of pm_runtime_get_sync(). The next seven patches target the m_can driver including the tcan4x5x spi driver glue code. Enric Balletbo i Serra's patch for the tcan4x5x Kconfig fix the REGMAP_SPI dependency handling. A patch by me for the tcan4x5x driver's probe() function adds missing error handling to for devm_regmap_init(), and in tcan4x5x_can_remove() the order of deregistration is fixed. Wu Bo's patch for the m_can driver fixes the state change handling in m_can_handle_state_change(). Two patches by Dan Murphy first introduce m_can_class_free_dev() and then make use of it to fix the freeing of the can device. A patch by Faiz Abbas add a missing shutdown of the CAN controller in the m_can_stop() function. * tag 'linux-can-fixes-for-5.10-20201115' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: m_can: m_can_stop(): set device to software init mode before closing can: m_can: Fix freeing of can device from peripherials can: m_can: m_can_class_free_dev(): introduce new function can: m_can: m_can_handle_state_change(): fix state change can: tcan4x5x: tcan4x5x_can_remove(): fix order of deregistration can: tcan4x5x: tcan4x5x_can_probe(): add missing error checking for devm_regmap_init() can: tcan4x5x: replace depends on REGMAP_SPI with depends on SPI can: flexcan: fix failure handling of pm_runtime_get_sync() can: flexcan: flexcan_setup_stop_mode(): add missing "req_bit" to stop mode property comment can: peak_usb: fix potential integer overflow on shift of a int can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to can_put_echo_skb() can: ti_hecc: Fix memleak in ti_hecc_probe can: dev: can_restart(): post buffer from the right context can: af_can: prevent potential access of uninitialized member in canfd_rcv() can: af_can: prevent potential access of uninitialized member in can_rcv() ==================== Link: https://lore.kernel.org/r/20201115174131.2089251-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16s390/dasd: fix null pointer dereference for ERP requestsStefan Haberland
When requeueing all requests on the device request queue to the blocklayer we might get to an ERP (error recovery) request that is a copy of an original CQR. Those requests do not have blocklayer request information or a pointer to the dasd_queue set. When trying to access those data it will lead to a null pointer dereference in dasd_requeue_all_requests(). Fix by checking if the request is an ERP request that can simply be ignored. The blocklayer request will be requeued by the original CQR that is on the device queue right behind the ERP request. Fixes: 9487cfd3430d ("s390/dasd: fix handling of internal requests") Cc: <stable@vger.kernel.org> #4.16 Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16ALSA: hda: Add Alderlake-S PCI ID and HDMI codec vidKai Vehmanen
Add HD Audio PCI ID and HDMI codec vendor ID for Intel Alder Lake. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20201116141955.2091240-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-16ACPI: fan: Initialize performance state sysfs attributeGuenter Roeck
The following warning is reported if lock debugging is enabled. DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 1 PID: 1 at kernel/locking/lockdep.c:4617 lockdep_init_map_waits+0x141/0x222 ... Call Trace: __kernfs_create_file+0x7a/0xd8 sysfs_add_file_mode_ns+0x135/0x189 sysfs_create_file_ns+0x70/0xa0 acpi_fan_probe+0x547/0x621 platform_drv_probe+0x67/0x8b ... Dynamically allocated sysfs attributes need to be initialized to avoid the warning. Fixes: d19e470b6605 ("ACPI: fan: Expose fan performance state information") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: 5.6+ <stable@vger.kernel.org> # 5.6+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-11-16iommu/vt-d: Take CONFIG_PCI_ATS into accountThomas Gleixner
pci_dev::physfn is only available when CONFIG_PCI_ATS is set. The recent fix for the irqdomain rework missed that dependency which makes the build fail when CONFIG_PCI_ATS=n. Add the necessary #ifdeffery. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: ff828729be44 ("iommu/vt-d: Cure VF irqdomain hickup") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Joerg Roedel <joro@8bytes.org>
2020-11-16KVM: PPC: Book3S HV: XIVE: Fix possible oops when accessing ESB pageCédric Le Goater
When accessing the ESB page of a source interrupt, the fault handler will retrieve the page address from the XIVE interrupt 'xive_irq_data' structure. If the associated KVM XIVE interrupt is not valid, that is not allocated at the HW level for some reason, the fault handler will dereference a NULL pointer leading to the oops below : WARNING: CPU: 40 PID: 59101 at arch/powerpc/kvm/book3s_xive_native.c:259 xive_native_esb_fault+0xe4/0x240 [kvm] CPU: 40 PID: 59101 Comm: qemu-system-ppc Kdump: loaded Tainted: G W --------- - - 4.18.0-240.el8.ppc64le #1 NIP: c00800000e949fac LR: c00000000044b164 CTR: c00800000e949ec8 REGS: c000001f69617840 TRAP: 0700 Tainted: G W --------- - - (4.18.0-240.el8.ppc64le) MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44044282 XER: 00000000 CFAR: c00000000044b160 IRQMASK: 0 GPR00: c00000000044b164 c000001f69617ac0 c00800000e96e000 c000001f69617c10 GPR04: 05faa2b21e000080 0000000000000000 0000000000000005 ffffffffffffffff GPR08: 0000000000000000 0000000000000001 0000000000000000 0000000000000001 GPR12: c00800000e949ec8 c000001ffffd3400 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 c000001f5c065160 c000000001c76f90 GPR24: c000001f06f20000 c000001f5c065100 0000000000000008 c000001f0eb98c78 GPR28: c000001dcab40000 c000001dcab403d8 c000001f69617c10 0000000000000011 NIP [c00800000e949fac] xive_native_esb_fault+0xe4/0x240 [kvm] LR [c00000000044b164] __do_fault+0x64/0x220 Call Trace: [c000001f69617ac0] [0000000137a5dc20] 0x137a5dc20 (unreliable) [c000001f69617b50] [c00000000044b164] __do_fault+0x64/0x220 [c000001f69617b90] [c000000000453838] do_fault+0x218/0x930 [c000001f69617bf0] [c000000000456f50] __handle_mm_fault+0x350/0xdf0 [c000001f69617cd0] [c000000000457b1c] handle_mm_fault+0x12c/0x310 [c000001f69617d10] [c00000000007ef44] __do_page_fault+0x264/0xbb0 [c000001f69617df0] [c00000000007f8c8] do_page_fault+0x38/0xd0 [c000001f69617e30] [c00000000000a714] handle_page_fault+0x18/0x38 Instruction dump: 40c2fff0 7c2004ac 2fa90000 409e0118 73e90001 41820080 e8bd0008 7c2004ac 7ca90074 39400000 915c0000 7929d182 <0b090000> 2fa50000 419e0080 e89e0018 ---[ end trace 66c6ff034c53f64f ]--- xive-kvm: xive_native_esb_fault: accessing invalid ESB page for source 8 ! Fix that by checking the validity of the KVM XIVE interrupt structure. Fixes: 6520ca64cde7 ("KVM: PPC: Book3S HV: XIVE: Add a mapping for the source ESB pages") Cc: stable@vger.kernel.org # v5.2+ Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201105134713.656160-1-clg@kaod.org
2020-11-16cpuidle: tegra: Annotate tegra_pm_set_cpu_in_lp2() with RCU_NONIDLEDmitry Osipenko
Annotate tegra_pm_set[clear]_cpu_in_lp2() with RCU_NONIDLE in order to fix lockdep warning about suspicious RCU usage of a spinlock during late idling phase. WARNING: suspicious RCU usage ... include/trace/events/lock.h:13 suspicious rcu_dereference_check() usage! ... (dump_stack) from (lock_acquire) (lock_acquire) from (_raw_spin_lock) (_raw_spin_lock) from (tegra_pm_set_cpu_in_lp2) (tegra_pm_set_cpu_in_lp2) from (tegra_cpuidle_enter) (tegra_cpuidle_enter) from (cpuidle_enter_state) (cpuidle_enter_state) from (cpuidle_enter_state_coupled) (cpuidle_enter_state_coupled) from (cpuidle_enter) (cpuidle_enter) from (do_idle) ... Tested-by: Peter Geis <pgwipeout@gmail.com> Reported-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-11-16xtensa: disable preemption around cache alias management callsMax Filippov
Although cache alias management calls set up and tear down TLB entries and fast_second_level_miss is able to restore TLB entry should it be evicted they absolutely cannot preempt each other because they use the same TLBTEMP area for different purposes. Disable preemption around all cache alias management calls to enforce that. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-11-16xtensa: fix TLBTEMP area placementMax Filippov
fast_second_level_miss handler for the TLBTEMP area has an assumption that page table directory entry for the TLBTEMP address range is 0. For it to be true the TLBTEMP area must be aligned to 4MB boundary and not share its 4MB region with anything that may use a page table. This is not true currently: TLBTEMP shares space with vmalloc space which results in the following kinds of runtime errors when fast_second_level_miss loads page table directory entry for the vmalloc space instead of fixing up the TLBTEMP area: Unable to handle kernel paging request at virtual address c7ff0e00 pc = d0009275, ra = 90009478 Oops: sig: 9 [#1] PREEMPT CPU: 1 PID: 61 Comm: kworker/u9:2 Not tainted 5.10.0-rc3-next-20201110-00007-g1fe4962fa983-dirty #58 Workqueue: xprtiod xs_stream_data_receive_workfn a00: 90009478 d11e1dc0 c7ff0e00 00000020 c7ff0000 00000001 7f8b8107 00000000 a08: 900c5992 d11e1d90 d0cc88b8 5506e97c 00000000 5506e97c d06c8074 d11e1d90 pc: d0009275, ps: 00060310, depc: 00000014, excvaddr: c7ff0e00 lbeg: d0009275, lend: d0009287 lcount: 00000003, sar: 00000010 Call Trace: xs_stream_data_receive_workfn+0x43c/0x770 process_one_work+0x1a1/0x324 worker_thread+0x1cc/0x3c0 kthread+0x10d/0x124 ret_from_kernel_thread+0xc/0x18 Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-11-16KVM: arm64: Correctly align nVHE percpu dataJamie Iles
The nVHE percpu data is partially linked but the nVHE linker script did not align the percpu section. The PERCPU_INPUT macro would then align the data to a page boundary: #define PERCPU_INPUT(cacheline) \ __per_cpu_start = .; \ *(.data..percpu..first) \ . = ALIGN(PAGE_SIZE); \ *(.data..percpu..page_aligned) \ . = ALIGN(cacheline); \ *(.data..percpu..read_mostly) \ . = ALIGN(cacheline); \ *(.data..percpu) \ *(.data..percpu..shared_aligned) \ PERCPU_DECRYPTED_SECTION \ __per_cpu_end = .; but then when the final vmlinux linking happens the hypervisor percpu data is included after page alignment and so the offsets potentially don't match. On my build I saw that the .hyp.data..percpu section was at address 0x20 and then the percpu data would begin at 0x1000 (because of the page alignment in PERCPU_INPUT), but when linked into vmlinux, everything would be shifted down by 0x20 bytes. This manifests as one of the CPUs getting lost when running kvm-unit-tests or starting any VM and subsequent soft lockup on a Cortex A72 device. Fixes: 30c953911c43 ("kvm: arm64: Set up hyp percpu data for nVHE") Signed-off-by: Jamie Iles <jamie@nuviainc.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: David Brazdil <dbrazdil@google.com> Cc: David Brazdil <dbrazdil@google.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201113150406.14314-1-jamie@nuviainc.com
2020-11-16Merge tag 'ti-sysc-fixes' into fixesTony Lindgren
2020-11-16usb: typec: qcom-pmic-typec: fix builtin build errorsRandy Dunlap
Fix build errors when CONFIG_TYPEC_QCOM_PMIC=y and CONFIG_USB_ROLE_SWITCH=m by limiting the former to =m when USB_ROLE_SWITCH also =m. powerpc64-linux-ld: drivers/usb/typec/qcom-pmic-typec.o: in function `.qcom_pmic_typec_remove': qcom-pmic-typec.c:(.text+0x28): undefined reference to `.usb_role_switch_set_role' powerpc64-linux-ld: qcom-pmic-typec.c:(.text+0x64): undefined reference to `.usb_role_switch_put' powerpc64-linux-ld: drivers/usb/typec/qcom-pmic-typec.o: in function `.qcom_pmic_typec_check_connection': qcom-pmic-typec.c:(.text+0x120): undefined reference to `.usb_role_switch_set_role' powerpc64-linux-ld: drivers/usb/typec/qcom-pmic-typec.o: in function `.qcom_pmic_typec_probe': qcom-pmic-typec.c:(.text+0x360): undefined reference to `.fwnode_usb_role_switch_get' powerpc64-linux-ld: qcom-pmic-typec.c:(.text+0x4e4): undefined reference to `.usb_role_switch_put' Fixes: 6c8cf3695176 ("usb: typec: Add QCOM PMIC typec detection driver") Cc: linux-usb@vger.kernel.org Cc: Wesley Cheng <wcheng@codeaurora.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20201116040653.7943-1-rdunlap@infradead.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-16Merge tag 'usb-fixes-v5.10-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: Two bugs for Cadence USB3 gadget driver - TD_SIZE entry at descriptor is error for multiple-trb use case - Possible use uninitialized variables * tag 'usb-fixes-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdns3: gadget: calculate TD_SIZE based on TD usb: cdns3: gadget: initialize link_trb as NULL
2020-11-16ALSA: usb-audio: Use ALC1220-VB-DT mapping for ASUS ROG Strix TRX40 moboKai-Heng Feng
ASUS ROG Strix also uses ALC1220-VB-DT, so adjust the mapping and add profile name to let userspace pick correct UCM profile. BugLink: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1031 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20201115153843.1109200-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-11-16phy: mediatek: fix spelling mistake in Kconfig "veriosn" -> "version"Colin Ian King
There is a spelling mistake in the Kconfig. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201114120518.416120-1-colin.king@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16phy: qualcomm: Fix 28 nm Hi-Speed USB PHY OF dependencyBryan O'Donoghue
This Kconfig entry should declare a dependency on OF Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20201113151225.1657600-3-bryan.odonoghue@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16phy: qualcomm: usb: Fix SuperSpeed PHY OF dependencyBryan O'Donoghue
This Kconfig entry should declare a dependency on OF Fixes: 6076967a500c ("phy: qualcomm: usb: Add SuperSpeed PHY driver") Reported-by: kernel test robot <lkp@intel.com> Link: https://lkml.org/lkml/2020/11/13/414 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20201113151225.1657600-2-bryan.odonoghue@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16phy: intel: PHY_INTEL_KEEMBAY_EMMC should depend on ARCH_KEEMBAYGeert Uytterhoeven
The Intel Keem Bay eMMC PHY is only present on Intel Keem Bay SoCs. Hence add a dependency on ARCH_KEEMBAY, to prevent asking the user about this driver when configuring a kernel without Intel Keem Bay platform support. Fixes: 885c4f4d6cf448f6 ("phy: intel: Add Keem Bay eMMC PHY support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201110144600.3279752-1-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16usb: cdns3: gadget: calculate TD_SIZE based on TDPeter Chen
The TRB entry TD_SIZE is the packet number for the TD (request) but not the each TRB, so it only needs to be assigned for the first TRB during the TD, and the value of it is for TD too. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-11-16usb: cdns3: gadget: initialize link_trb as NULLPeter Chen
There is an uninitialized variable "link_trb" usage at function cdns3_ep_run_transfer. Fixed it by initialize "link_trb" as NULL. Fixes: 4e218882eb5a ("usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-11-15smb3: Handle error case during offload read pathRohith Surabattula
Mid callback needs to be called only when valid data is read into pages. These patches address a problem found during decryption offload: CIFS: VFS: trying to dequeue a deleted mid that could cause a refcount use after free: Workqueue: smb3decryptd smb2_decrypt_offload [cifs] Signed-off-by: Rohith Surabattula <rohiths@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> #5.4+ Signed-off-by: Steve French <stfrench@microsoft.com>
2020-11-15smb3: Avoid Mid pending list corruptionRohith Surabattula
When reconnect happens Mid queue can be corrupted when both demultiplex and offload thread try to dequeue the MID from the pending list. These patches address a problem found during decryption offload: CIFS: VFS: trying to dequeue a deleted mid that could cause a refcount use after free: Workqueue: smb3decryptd smb2_decrypt_offload [cifs] Signed-off-by: Rohith Surabattula <rohiths@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> #5.4+ Signed-off-by: Steve French <stfrench@microsoft.com>
2020-11-15smb3: Call cifs reconnect from demultiplex threadRohith Surabattula
cifs_reconnect needs to be called only from demultiplex thread. skip cifs_reconnect in offload thread. So, cifs_reconnect will be called by demultiplex thread in subsequent request. These patches address a problem found during decryption offload: CIFS: VFS: trying to dequeue a deleted mid that can cause a refcount use after free: [ 1271.389453] Workqueue: smb3decryptd smb2_decrypt_offload [cifs] [ 1271.389456] RIP: 0010:refcount_warn_saturate+0xae/0xf0 [ 1271.389457] Code: fa 1d 6a 01 01 e8 c7 44 b1 ff 0f 0b 5d c3 80 3d e7 1d 6a 01 00 75 91 48 c7 c7 d8 be 1d a2 c6 05 d7 1d 6a 01 01 e8 a7 44 b1 ff <0f> 0b 5d c3 80 3d c5 1d 6a 01 00 0f 85 6d ff ff ff 48 c7 c7 30 bf [ 1271.389458] RSP: 0018:ffffa4cdc1f87e30 EFLAGS: 00010286 [ 1271.389458] RAX: 0000000000000000 RBX: ffff9974d2809f00 RCX: ffff9974df898cc8 [ 1271.389459] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9974df898cc0 [ 1271.389460] RBP: ffffa4cdc1f87e30 R08: 0000000000000004 R09: 00000000000002c0 [ 1271.389460] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9974b7fdb5c0 [ 1271.389461] R13: ffff9974d2809f00 R14: ffff9974ccea0a80 R15: ffff99748e60db80 [ 1271.389462] FS: 0000000000000000(0000) GS:ffff9974df880000(0000) knlGS:0000000000000000 [ 1271.389462] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1271.389463] CR2: 000055c60f344fe4 CR3: 0000001031a3c002 CR4: 00000000003706e0 [ 1271.389465] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1271.389465] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1271.389466] Call Trace: [ 1271.389483] cifs_mid_q_entry_release+0xce/0x110 [cifs] [ 1271.389499] smb2_decrypt_offload+0xa9/0x1c0 [cifs] [ 1271.389501] process_one_work+0x1e8/0x3b0 [ 1271.389503] worker_thread+0x50/0x370 [ 1271.389504] kthread+0x12f/0x150 [ 1271.389506] ? process_one_work+0x3b0/0x3b0 [ 1271.389507] ? __kthread_bind_mask+0x70/0x70 [ 1271.389509] ret_from_fork+0x22/0x30 Signed-off-by: Rohith Surabattula <rohiths@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> #5.4+ Signed-off-by: Steve French <stfrench@microsoft.com>
2020-11-15cifs: fix a memleak with modefromsidNamjae Jeon
kmemleak reported a memory leak allocated in query_info() when cifs is working with modefromsid. backtrace: [<00000000aeef6a1e>] slab_post_alloc_hook+0x58/0x510 [<00000000b2f7a440>] __kmalloc+0x1a0/0x390 [<000000006d470ebc>] query_info+0x5b5/0x700 [cifs] [<00000000bad76ce0>] SMB2_query_acl+0x2b/0x30 [cifs] [<000000001fa09606>] get_smb2_acl_by_path+0x2f3/0x720 [cifs] [<000000001b6ebab7>] get_smb2_acl+0x75/0x90 [cifs] [<00000000abf43904>] cifs_acl_to_fattr+0x13b/0x1d0 [cifs] [<00000000a5372ec3>] cifs_get_inode_info+0x4cd/0x9a0 [cifs] [<00000000388e0a04>] cifs_revalidate_dentry_attr+0x1cd/0x510 [cifs] [<0000000046b6b352>] cifs_getattr+0x8a/0x260 [cifs] [<000000007692c95e>] vfs_getattr_nosec+0xa1/0xc0 [<00000000cbc7d742>] vfs_getattr+0x36/0x40 [<00000000de8acf67>] vfs_statx_fd+0x4a/0x80 [<00000000a58c6adb>] __do_sys_newfstat+0x31/0x70 [<00000000300b3b4e>] __x64_sys_newfstat+0x16/0x20 [<000000006d8e9c48>] do_syscall_64+0x37/0x80 This patch add missing kfree for pntsd when mounting modefromsid option. Cc: Stable <stable@vger.kernel.org> # v5.4+ Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2020-11-15Linux 5.10-rc4v5.10-rc4Linus Torvalds
2020-11-16powerpc/64s: Fix KVM system reset handling when CONFIG_PPC_PSERIES=yNicholas Piggin
pseries guest kernels have a FWNMI handler for SRESET and MCE NMIs, which is basically the same as the regular handlers for those interrupts. The system reset FWNMI handler did not have a KVM guest test in it, although it probably should have because the guest can itself run guests. Commit 4f50541f6703b ("powerpc/64s/exception: Move all interrupt handlers to new style code gen macros") convert the handler faithfully to avoid a KVM test with a "clever" trick to modify the IKVM_REAL setting to 0 when the fwnmi handler is to be generated (PPC_PSERIES=y). This worked when the KVM test was generated in the interrupt entry handlers, but a later patch moved the KVM test to the common handler, and the common handler macro is expanded below the fwnmi entry. This prevents the KVM test from being generated even for the 0x100 entry point as well. The result is NMI IPIs in the host kernel when a guest is running will use gest registers. This goes particularly badly when an HPT guest is running and the MMU is set to guest mode. Remove this trickery and just generate the test always. Fixes: 9600f261acaa ("powerpc/64s/exception: Move KVM test to common code") Cc: stable@vger.kernel.org # v5.7+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201114114743.3306283-1-npiggin@gmail.com
2020-11-15vhost scsi: Add support for LUN resets.Mike Christie
In newer versions of virtio-scsi we just reset the timer when an a command times out, so TMFs are never sent for the cmd time out case. However, in older kernels and for the TMF inject cases, we can still get resets and we end up just failing immediately so the guest might see the device get offlined and IO errors. For the older kernel cases, we want the same end result as the modern virtio-scsi driver where we let the lower levels fire their error handling and handle the problem. And at the upper levels we want to wait. This patch ties the LUN reset handling into the LIO TMF code which will just wait for outstanding commands to complete like we are doing in the modern virtio-scsi case. Note: I did not handle the ABORT case to keep this simple. For ABORTs LIO just waits on the cmd like how it does for the RESET case. If an ABORT fails, the guest OS ends up escalating to LUN RESET, so in the end we get the same behavior where we wait on the outstanding cmds. Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/1604986403-4931-6-git-send-email-michael.christie@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-11-15vhost scsi: add lun parser helperMike Christie
Move code to parse lun from req's lun_buf to helper, so tmf code can use it in the next patch. Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/1604986403-4931-5-git-send-email-michael.christie@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-11-15vhost scsi: fix cmd completion raceMike Christie
We might not do the final se_cmd put from vhost_scsi_complete_cmd_work. When the last put happens a little later then we could race where vhost_scsi_complete_cmd_work does vhost_signal, the guest runs and sends more IO, and vhost_scsi_handle_vq runs but does not find any free cmds. This patch has us delay completing the cmd until the last lio core ref is dropped. We then know that once we signal to the guest that the cmd is completed that if it queues a new command it will find a free cmd. Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/1604986403-4931-4-git-send-email-michael.christie@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-11-15vhost scsi: alloc cmds per vq instead of sessionMike Christie
We currently are limited to 256 cmds per session. This leads to problems where if the user has increased virtqueue_size to more than 2 or cmd_per_lun to more than 256 vhost_scsi_get_tag can fail and the guest will get IO errors. This patch moves the cmd allocation to per vq so we can easily match whatever the user has specified for num_queues and virtqueue_size/cmd_per_lun. It also makes it easier to control how much memory we preallocate. For cases, where perf is not as important and we can use the current defaults (1 vq and 128 cmds per vq) memory use from preallocate cmds is cut in half. For cases, where we are willing to use more memory for higher perf, cmd mem use will now increase as the num queues and queue depth increases. Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/1604986403-4931-3-git-send-email-michael.christie@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-11-15vhost: add helper to check if a vq has been setupMike Christie
This adds a helper check if a vq has been setup. The next patches will use this when we move the vhost scsi cmd preallocation from per session to per vq. In the per vq case, we only want to allocate cmds for vqs that have actually been setup and not for all the possible vqs. Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/1604986403-4931-2-git-send-email-michael.christie@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-11-15vdpasim: fix "mac_pton" undefined errorLaurent Vivier
ERROR: modpost: "mac_pton" [drivers/vdpa/vdpa_sim/vdpa_sim.ko] undefined! mac_pton() is defined in lib/net_utils.c and is not built if NET is not set. Select GENERIC_NET_UTILS as vdpasim doesn't depend on NET. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20201113155706.599434-1-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
2020-11-15Merge tag 'drm-fixes-2020-11-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Nouveau fixes: - atomic modesetting regression fix - ttm pre-nv50 fix - connector NULL ptr deref fix" * tag 'drm-fixes-2020-11-16' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhere drm/nouveau/ttm: avoid using nouveau_drm.ttm.type_vram prior to nv50 drm/nouveau/kms: Fix NULL pointer dereference in nouveau_connector_detect_depth
2020-11-16Merge branch 'linux-5.10' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
- atomic modesetting regression fix - ttm pre-nv50 fix - connector NULL ptr deref fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5D9p78MNN0OxVeRZxN8LDqcadJEGUEFCgWJQ6+_rjPuw@mail.gmail.com
2020-11-15Merge tag 'char-misc-5.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc/whatever driver fixes for 5.10-rc4. Nothing huge, lots of small fixes for reported issues: - habanalabs driver fixes - speakup driver fixes - uio driver fixes - virtio driver fix - other tiny driver fixes Full details are in the shortlog. All of these have been in linux-next for a full week with no reported issues" * tag 'char-misc-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: uio: Fix use-after-free in uio_unregister_device() firmware: xilinx: fix out-of-bounds access nitro_enclaves: Fixup type and simplify logic of the poll mask setup speakup ttyio: Do not schedule() in ttyio_in_nowait speakup: Fix clearing selection in safe context speakup: Fix var_id_t values and thus keymap virtio: virtio_console: fix DMA memory allocation for rproc serial habanalabs/gaudi: mask WDT error in QMAN habanalabs/gaudi: move coresight mmu config habanalabs: fix kernel pointer type mei: protect mei_cl_mtu from null dereference
2020-11-15Merge tag 'usb-5.10-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt fixes from Greg KH: "Here are some small Thunderbolt and USB driver fixes for 5.10-rc4 to solve some reported issues. Nothing huge in here, just small things: - thunderbolt memory leaks fixed and new device ids added - revert of problem patch for the musb driver - new quirks added for USB devices - typec power supply fixes to resolve much reported problems about charging notifications not working anymore All except the cdc-acm driver quirk addition have been in linux-next with no reported issues (the quirk patch was applied on Friday, and is self-contained)" * tag 'usb-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode MAINTAINERS: add usb raw gadget entry usb: typec: ucsi: Report power supply changes xhci: hisilicon: fix refercence leak in xhci_histb_probe Revert "usb: musb: convert to devm_platform_ioremap_resource_byname" thunderbolt: Add support for Intel Tiger Lake-H thunderbolt: Only configure USB4 wake for lane 0 adapters thunderbolt: Add uaccess dependency to debugfs interface thunderbolt: Fix memory leak if ida_simple_get() fails in enumerate_services() thunderbolt: Add the missed ida_simple_remove() in ring_request_msix()
2020-11-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Fixes for ARM and x86, the latter especially for old processors without two-dimensional paging (EPT/NPT)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use KVM: SVM: Update cr3_lm_rsvd_bits for AMD SEV guests KVM: x86: Introduce cr3_lm_rsvd_bits in kvm_vcpu_arch KVM: x86: clflushopt should be treated as a no-op by emulation KVM: arm64: Handle SCXTNUM_ELx traps KVM: arm64: Unify trap handlers injecting an UNDEF KVM: arm64: Allow setting of ID_AA64PFR0_EL1.CSV2 from userspace
2020-11-15Merge tag 'x86-urgent-2020-11-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of fixes for x86: - Cure the fallout from the MSI irqdomain overhaul which missed that the Intel IOMMU does not register virtual function devices and therefore never reaches the point where the MSI interrupt domain is assigned. This made the VF devices use the non-remapped MSI domain which is trapped by the IOMMU/remap unit - Remove an extra space in the SGI_UV architecture type procfs output for UV5 - Remove a unused function which was missed when removing the UV BAU TLB shootdown handler" * tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: iommu/vt-d: Cure VF irqdomain hickup x86/platform/uv: Fix copied UV5 output archtype x86/platform/uv: Drop last traces of uv_flush_tlb_others
2020-11-15Merge tag 'perf-urgent-2020-11-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A set of fixes for perf: - A set of commits which reduce the stack usage of various perf event handling functions which allocated large data structs on stack causing stack overflows in the worst case - Use the proper mechanism for detecting soft interrupts in the recursion protection - Make the resursion protection simpler and more robust - Simplify the scheduling of event groups to make the code more robust and prepare for fixing the issues vs. scheduling of exclusive event groups - Prevent event multiplexing and rotation for exclusive event groups - Correct the perf event attribute exclusive semantics to take pinned events, e.g. the PMU watchdog, into account - Make the anythread filtering conditional for Intel's generic PMU counters as it is not longer guaranteed to be supported on newer CPUs. Check the corresponding CPUID leaf to make sure - Fixup a duplicate initialization in an array which was probably caused by the usual 'copy & paste - forgot to edit' mishap" * tag 'perf-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix Add BW copypasta perf/x86/intel: Make anythread filter support conditional perf: Tweak perf_event_attr::exclusive semantics perf: Fix event multiplexing for exclusive groups perf: Simplify group_sched_in() perf: Simplify group_sched_out() perf/x86: Make dummy_iregs static perf/arch: Remove perf_sample_data::regs_user_copy perf: Optimize get_recursion_context() perf: Fix get_recursion_context() perf/x86: Reduce stack usage for x86_pmu::drain_pebs() perf: Reduce stack usage of perf_output_begin()
2020-11-15Merge tag 'sched-urgent-2020-11-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "A set of scheduler fixes: - Address a load balancer regression by making the load balancer use the same logic as the wakeup path to spread tasks in the LLC domain - Prefer the CPU on which a task run last over the local CPU in the fast wakeup path for asymmetric CPU capacity systems to align with the symmetric case. This ensures more locality and prevents massive migration overhead on those asymetric systems - Fix a memory corruption bug in the scheduler debug code caused by handing a modified buffer pointer to kfree()" * tag 'sched-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix memory corruption caused by multiple small reads of flags sched/fair: Prefer prev cpu in asymmetric wakeup path sched/fair: Ensure tasks spreading in LLC during LB
2020-11-15can: m_can: m_can_stop(): set device to software init mode before closingFaiz Abbas
There might be some requests pending in the buffer when the interface close sequence occurs. In some devices, these pending requests might lead to the module not shutting down properly when m_can_clk_stop() is called. Therefore, move the device to init state before potentially powering it down. Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200825055442.16994-1-faiz_abbas@ti.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-15can: m_can: Fix freeing of can device from peripherialsDan Murphy
Fix leaking netdev device from peripherial devices. The call to allocate the netdev device is made from and managed by the peripherial. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: http://lore.kernel.org/r/20200227183829.21854-2-dmurphy@ti.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-12 10:45:19 +0000