summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-11net: phy: icplus: don't set APS_EN bit on IP101GMichael Walle
This bit is reserved as 'always-write-1'. While this is not a particular error, because we are only setting it, guard it by checking the model to prevent errors in the future. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: phy: icplus: split IP101A/G driverMichael Walle
Unfortunately, the IP101A and IP101G share the same PHY identifier. While most of the functions are somewhat backwards compatible, there is for example the APS_EN bit on the IP101A but on the IP101G this bit reserved. Also, the IP101G has many more functionalities. Deduce the model by accessing the page select register which - according to the datasheet - is not available on the IP101A. If this register is writable, assume we have an IP101G. Split the combined IP101A/G driver into two separate drivers. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: phy: icplus: use the .soft_reset() of the phy-coreMichael Walle
The PHY core already resets the PHY before .config_init() if a .soft_reset() op is registered. Drop the open-coded ip1xx_reset(). Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: phy: icplus: drop address operator for functionsMichael Walle
Don't sometimes use the address operator and sometimes not. Drop it and make the code look uniform. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: phy: icplus: use PHY_ID_MATCH_EXACT() for IP101A/GMichael Walle
According to the datasheet of the IP101A/G there is no revision field and MII_PHYSID2 always reads as 0x0c54. Use PHY_ID_MATCH_EXACT() then. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: phy: icplus: use PHY_ID_MATCH_MODEL() macroMichael Walle
Simpify the initializations of the structures. There is no functional change. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch 'dsa-hsr-offload'David S. Miller
George McCollister says: ==================== add HSR offloading support for DSA switches Add support for offloading HSR/PRP (IEC 62439-3) tag insertion, tag removal, forwarding and duplication on DSA switches. This series adds offloading to the xrs700x DSA driver. Changes since RFC: * Split hsr and dsa patches. (Florian Fainelli) Changes since v1: * Fixed some typos/wording. (Vladimir Oltean) * eliminate IFF_HSR and use is_hsr_master instead. (Vladimir Oltean) * Make hsr_handle_sup_frame handle skb_std as well (required when offloading) * Don't add hsr tag for HSR v0 supervisory frames. * Fixed tag insertion offloading for PRP. Changes since v2: * Return -EOPNOTSUPP instead of 0 in dsa_switch_hsr_join and dsa_switch_hsr_leave. (Vladimir Oltean) * Only allow ports 1 and 2 to be HSR/PRP redundant ports. (Tobias Waldekranz) * Set and remove HSR features for both redundant ports. (Vladimir Oltean) * Change port_hsr_leave() to return int instead of void. * Remove hsr_init_skb() proto argument. (Vladimir Oltean) =================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: dsa: xrs700x: add HSR offloading supportGeorge McCollister
Add offloading for HSR/PRP (IEC 62439-3) tag insertion, tag removal forwarding and duplication supported by the xrs7000 series switches. Only HSR v1 and PRP v1 are supported by the xrs7000 series switches (HSR v0 is not). Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: dsa: add support for offloading HSRGeorge McCollister
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding on DSA switches. Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch. The DSA switch driver should then set netdev feature flags for the HSR/PRP operation that it offloads. NETIF_F_HW_HSR_TAG_INS NETIF_F_HW_HSR_TAG_RM NETIF_F_HW_HSR_FWD NETIF_F_HW_HSR_DUP Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: hsr: add offloading supportGeorge McCollister
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding. For HSR, insertion involves the switch adding a 6 byte HSR header after the 14 byte Ethernet header. For PRP it adds a 6 byte trailer. Tag removal involves automatically stripping the HSR/PRP header/trailer in the switch. This is possible when the switch also performs auto deduplication using the HSR/PRP header/trailer (making it no longer required). Forwarding involves automatically forwarding between redundant ports in an HSR. This is crucial because delay is accumulated as a frame passes through each node in the ring. Duplication involves the switch automatically sending a single frame from the CPU port to both redundant ports. This is required because the inserted HSR/PRP header/trailer must contain the same sequence number on the frames sent out both redundant ports. Export is_hsr_master so DSA can tell them apart from other devices in dsa_slave_changeupper. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: hsr: generate supervision frame without HSR/PRP tagGeorge McCollister
For a switch to offload insertion of HSR/PRP tags, frames must not be sent to the CPU facing switch port with a tag. Generate supervision frames (eth type ETH_P_PRP) without HSR v1 (ETH_P_HSR)/PRP tag and rely on create_tagged_frame which inserts it later. This will allow skipping the tag insertion for all outgoing frames in the future which is required for HSR v1/PRP tag insertions to be offloaded. HSR v0 supervision frames always contain tag information so insertion of the tag can't be offloaded. IEC 62439-3 Ed.2.0 (HSR v1) specifically notes that this was changed since v0 to allow offloading. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: dsa: xrs700x: use of_match_ptr() on xrs700x_mdio_dt_idsGeorge McCollister
Use of_match_ptr() on xrs700x_mdio_dt_ids so that NULL is substituted when CONFIG_OF isn't defined. This will prevent unnecessary use of xrs700x_mdio_dt_ids when CONFIG_OF isn't defined. Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: dsa: xrs700x: fix unused warning for of_device_idGeorge McCollister
Fix unused variable warning that occurs when CONFIG_OF isn't defined by adding __maybe_unused. >> drivers/net/dsa/xrs700x/xrs700x_i2c.c:127:34: warning: unused variable 'xrs700x_i2c_dt_ids' [-Wunused-const-variable] static const struct of_device_id xrs700x_i2c_dt_ids[] = { Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11netdev-FAQ: answer some questions about the patchwork checksJakub Kicinski
Point out where patchwork bot's code lives, and that we don't want people posting stuff that doesn't build. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch 'tcp-rfc-6056'David S. Miller
Eric Dumazet says: ==================== tcp: RFC 6056 induced changes This is based on a report from David Dworken. First patch implements RFC 6056 3.3.4 proposal. Second patch is adding a little bit of noise to make attacker life a bit harder. =================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11tcp: add some entropy in __inet_hash_connect()Eric Dumazet
Even when implementing RFC 6056 3.3.4 (Algorithm 4: Double-Hash Port Selection Algorithm), a patient attacker could still be able to collect enough state from an otherwise idle host. Idea of this patch is to inject some noise, in the cases __inet_hash_connect() found a candidate in the first attempt. This noise should not significantly reduce the collision avoidance, and should be zero if connection table is already well used. Note that this is not implementing RFC 6056 3.3.5 because we think Algorithm 5 could hurt typical workloads. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Dworken <ddworken@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11tcp: change source port randomizarion at connect() timeEric Dumazet
RFC 6056 (Recommendations for Transport-Protocol Port Randomization) provides good summary of why source selection needs extra care. David Dworken reminded us that linux implements Algorithm 3 as described in RFC 6056 3.3.3 Quoting David : In the context of the web, this creates an interesting info leak where websites can count how many TCP connections a user's computer is establishing over time. For example, this allows a website to count exactly how many subresources a third party website loaded. This also allows: - Distinguishing between different users behind a VPN based on distinct source port ranges. - Tracking users over time across multiple networks. - Covert communication channels between different browsers/browser profiles running on the same computer - Tracking what applications are running on a computer based on the pattern of how fast source ports are getting incremented. Section 3.3.4 describes an enhancement, that reduces attackers ability to use the basic information currently stored into the shared 'u32 hint'. This change also decreases collision rate when multiple applications need to connect() to different destinations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: David Dworken <ddworken@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Revert "net-loopback: set lo dev initial state to UP"Petr Machata
In commit c9dca822c729 ("net-loopback: set lo dev initial state to UP"), linux started automatically bringing up the loopback device of a newly created namespace. However, an existing user script might reasonably have the following stanza when creating a new namespace -- and in fact at least tools/testing/selftests/net/fib_nexthops.sh in Linux's very own testsuite does: # set -e # ip netns add foo # ip -netns foo addr add 127.0.0.1/8 dev lo # ip -netns foo link set lo up # set +e This will now fail, because the kernel reasonably rejects "ip addr add" of a duplicate address. The described change of behavior therefore constitutes a breakage. Revert it. Fixes: c9dca822c729 ("net-loopback: set lo dev initial state to UP") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: phy: introduce phydev->portMichael Walle
At the moment, PORT_MII is reported in the ethtool ops. This is odd because it is an interface between the MAC and the PHY and no external port. Some network card drivers will overwrite the port to twisted pair or fiber, though. Even worse, the MDI/MDIX setting is only used by ethtool if the port is twisted pair. Set the port to PORT_TP by default because most PHY drivers are copper ones. If there is fibre support and it is enabled, the PHY driver will set it to PORT_FIBRE. This will change reporting PORT_MII to either PORT_TP or PORT_FIBRE; except for the genphy fallback driver. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11devlink: Fix dmac_filter trap name, align to its documentationAya Levin
%s/dest_mac_filter/dmac_filter/g Fixes: e78ab164591f ("devlink: Add DMAC filter generic packet trap") Signed-off-by: Aya Levin <ayal@nvidia.com> Reported-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch 'ibmvnic-coding-style'David S. Miller
Lijun Pan says: ==================== ibmvnic: a set of fixes of coding style This series address several coding style problems. v2: rebased on top of tree. Add the Reviewed-by tag from v1 reviews. patch 8/8 is new. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: prefer strscpy over strlcpyLijun Pan
Fix this warning: WARNING: Prefer strscpy over strlcpy - see: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: remove unused spinlock_t stats_lock definitionLijun Pan
stats_lock is no longer used. So remove it. Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: add comments for spinlock_t definitionsLijun Pan
There are several spinlock_t definitions without comments. Add them. Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix miscellaneous checksLijun Pan
Fix the following checkpatch checks: CHECK: Macro argument 'off' may be better as '(off)' to avoid precedence issues CHECK: Alignment should match open parenthesis CHECK: multiple assignments should be avoided CHECK: Blank lines aren't necessary before a close brace '}' CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Unnecessary parentheses around 'rc != H_FUNCTION' Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: avoid multiple line dereferenceLijun Pan
Fix the following checkpatch warning: WARNING: Avoid multiple line dereference Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix bracesLijun Pan
Fix the following checkpatch warning: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix block commentsLijun Pan
Fix the following checkpatch warning: WARNING: networking block comments don't use an empty /* line, use /* Comment... Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: prefer 'unsigned long' over 'unsigned long int'Lijun Pan
Fix the following checkpatch warnings: WARNING: Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary WARNING: Prefer 'long' over 'long int' as the int is unnecessary Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-02-10 This series contains updates to i40e driver only. Arkadiusz adds support for software controlled DCB. Upon disabling of the firmware LLDP agent, the driver configures DCB with default values (only one Traffic Class). At the same time, it allows a software based LLDP agent - userspace application i.e. lldpad) to receive DCB TLVs and set desired DCB configuration through DCB related netlink callbacks. Aleksandr implements get and set ethtool ops for Energy Efficient Ethernet. Przemyslaw extends support for ntuple filters allowing for Flow Director IPv6 and VLAN filters. Kaixu Xia removes an unneeded assignment. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11staging: qlge: Remove duplicate word in commentTom Seewald
Fix this typo by simply removing the duplicate 'and'. Signed-off-by: Tom Seewald <tseewald@gmail.com> Link: https://lore.kernel.org/r/20210211192721.17292-1-tseewald@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-11staging: rtl8723bs: remove obsolete commented out codekarthik alapati
There is a bunch of messy, commented out code. Just delete it. Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: karthik alapati <mail@karthek.com> Link: https://lore.kernel.org/r/485415dbafc32710f1a8e3f7c951868f7738efe9.1613048573.git.mail@karthek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-11staging: rtl8723bs: fix function comments to follow kernel-dockarthik alapati
there are some good function comments not following kernel-doc. Make them follow kernel-doc style Signed-off-by: karthik alapati <mail@karthek.com> Link: https://lore.kernel.org/r/ca8feff68a247c54b67d9c19555d1d8c1f16ebfe.1613048573.git.mail@karthek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-11kbuild: Do not clean resolve_btfids if the output does not existJiri Olsa
Nathan reported issue with cleaning empty build directory: $ make -s O=build distclean ../../scripts/Makefile.include:4: *** \ O=/ho...build/tools/bpf/resolve_btfids does not exist. Stop. The problem that tools scripts require existing output directory, otherwise it fails. Adding check around the resolve_btfids clean target to ensure the output directory is in place. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/bpf/20210211124004.1144344-1-jolsa@kernel.org
2021-02-11tracing: Check length before giving out the filter bufferSteven Rostedt (VMware)
When filters are used by trace events, a page is allocated on each CPU and used to copy the trace event fields to this page before writing to the ring buffer. The reason to use the filter and not write directly into the ring buffer is because a filter may discard the event and there's more overhead on discarding from the ring buffer than the extra copy. The problem here is that there is no check against the size being allocated when using this page. If an event asks for more than a page size while being filtered, it will get only a page, leading to the caller writing more that what was allocated. Check the length of the request, and if it is more than PAGE_SIZE minus the header default back to allocating from the ring buffer directly. The ring buffer may reject the event if its too big anyway, but it wont overflow. Link: https://lore.kernel.org/ath10k/1612839593-2308-1-git-send-email-wgong@codeaurora.org/ Cc: stable@vger.kernel.org Fixes: 0fc1b09ff1ff4 ("tracing: Use temp buffer when filtering events") Reported-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-11Merge tag 'gpio-fixes-for-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "This is hopefully the last batch of fixes for this release cycle. We have a minor fix for a Kconfig regression as well as fixes for older bugs in gpio-ep93xx: - don't build gpio-mxs unconditionally with COMPILE_TEST enabled - fix two problems with interrupt handling in gpio-ep93xx" * tag 'gpio-fixes-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: ep93xx: Fix single irqchip with multi gpiochips gpio: ep93xx: fix BUG_ON port F usage gpio: mxs: GPIO_MXS should not default to y unconditionally
2021-02-11Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.12. Major changes: wil6210 * add support for extended DMG MCS 12.1 rate
2021-02-11io_uring: inline io_complete_rw_common()Pavel Begunkov
__io_complete_rw() casts request to kiocb for it to be immediately container_of()'ed by io_complete_rw_common(). And the last function's name doesn't do a great job of illuminating its purposes, so just inline it in its only user. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-11io_uring: move res check out of io_rw_reissue()Pavel Begunkov
We pass return code into io_rw_reissue() only to be able to check if it's -EAGAIN. That's not the cleanest approach and may prevent inlining of the non-EAGAIN fast path, so do it at call sites. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-11Merge tag 'iwlwifi-next-for-kalle-2021-02-10' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Second set of iwlwifi patches intended for v5.12 * Add some device IDs that got lost in a rebase; * A bunch of fixes in the PPAG code; * A few fixes in the debugging framework; * Fix a couple of potential crashes in error paths; * More HW IDs for new HW; * Add one more value to the device configuration code; * Support new scan config FW API; * Some more CSA fixes; * Support for RF interference mitigation (RFI); * Improvements in the NVM flows; * Bump the FW API support version; * Implement support for PNVM from BIOS; * Fix PM status when a FW crash happens; * Some other small fixes, clean-ups and improvements. # gpg: Signature made Thu 11 Feb 2021 02:02:34 AM EET using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
2021-02-11io_uring: simplify iopoll reissuingPavel Begunkov
Don't stash -EAGAIN'ed iopoll requests into a list to reissue it later, do it eagerly. It removes overhead on keeping and checking that list, and allows in case of failure for these requests to be completed through normal iopoll completion path. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-11io_uring: clean up io_req_free_batch_finish()Pavel Begunkov
io_req_free_batch_finish() is final and does not permit struct req_batch to be reused without re-init. To be more consistent don't clear ->task there. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-11Merge tag 'nvme-5.12-2021-02-11' of git://git.infradead.org/nvme into ↵Jens Axboe
for-5.12/drivers Pull NVMe updates from Christoph: "nvme updates for 5.12: - fix multipath handling of ->queue_rq errors (Chao Leng) - nvmet cleanups (Chaitanya Kulkarni) - add a quirk for buggy Amazon controller (Filippo Sironi) - avoid devm allocations in nvme-hwmon that don't interact well with fabrics (Hannes Reinecke) - sysfs cleanups (Jiapeng Chong) - fix nr_zones for multipath (Keith Busch) - nvme-tcp crash fix for no-data commands (Sagi Grimberg) - nvmet-tcp fixes (Sagi Grimberg) - add a missing __rcu annotation (me)" * tag 'nvme-5.12-2021-02-11' of git://git.infradead.org/nvme: (22 commits) nvme-tcp: fix crash triggered with a dataless request submission nvme: add 48-bit DMA address quirk for Amazon NVMe controllers nvme-hwmon: rework to avoid devm allocation nvmet: remove else at the end of the function nvmet: add nvmet_req_subsys() helper nvmet: use min of device_path and disk len nvmet: use invalid cmd opcode helper nvmet: use invalid cmd opcode helper nvmet: add helper to report invalid opcode nvmet: remove extra variable in id-ns handler nvmet: make nvmet_find_namespace() req based nvmet: return uniform error for invalid ns nvmet: set status to 0 in case for invalid nsid nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues nvme-multipath: set nr_zones for zoned namespaces nvmet-tcp: fix potential race of tcp socket closing accept_work nvmet-tcp: fix receive data digest calculation for multiple h2cdata PDUs nvme-rdma: handle nvme_rdma_post_send failures better nvme-fabrics: avoid double completions in nvmf_fail_nonready_command nvme: introduce a nvme_host_path_error helper ...
2021-02-11ath11k: qmi: add debug message for allocated memory segment addresses and sizesKalle Valo
This helps debugging firmware memory allocation problems. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613041549-7265-1-git-send-email-kvalo@codeaurora.org
2021-02-11ath11k: pci: remove experimental warningKalle Valo
I have received feedback that QCA6390 PCI support is working for many, and I'm also using QCA6390 on my daily driver^Hlaptop. While there are issues still to be resolved it's not really experimental anymore, so remove the experimental warning from driver initialisation. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613040697-20289-1-git-send-email-kvalo@codeaurora.org
2021-02-11ath10k: hold RCU lock when calling ieee80211_find_sta_by_ifaddr()Shuah Khan
ieee80211_find_sta_by_ifaddr() must be called under the RCU lock and the resulting pointer is only valid under RCU lock as well. Fix ath10k_wmi_tlv_op_pull_peer_stats_info() to hold RCU lock before it calls ieee80211_find_sta_by_ifaddr() and release it when the resulting pointer is no longer needed. This problem was found while reviewing code to debug RCU warn from ath10k_wmi_tlv_parse_peer_stats_info(). Link: https://lore.kernel.org/linux-wireless/7230c9e5-2632-b77e-c4f9-10eca557a5bb@linuxfoundation.org/ Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210210212107.40373-1-skhan@linuxfoundation.org
2021-02-12kbuild: fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64Masahiro Yamada
Stephen Rothwell reported a build error on ppc64 when CONFIG_TRIM_UNUSED_KSYMS is enabled. Jessica Yu pointed out the cause of the error with the reference to the ppc64 ELF ABI: "Symbol names with a dot (.) prefix are reserved for holding entry point addresses. The value of a symbol named ".FN", if it exists, is the entry point of the function "FN". As it turned out, CONFIG_TRIM_UNUSED_KSYMS has never worked for ppc64, but this issue has been unnoticed until recently because this option depends on !UNUSED_SYMBOLS hence is disabled by all{mod,yes}config. (Then, it was uncovered by another patch removing UNUSED_SYMBOLS.) Removing the dot prefix in scripts/gen_autoksyms.sh fixes the issue. Please note it must be done before 'sort -u' because modules have both ._mcount and _mcount undefined when CONFIG_FUNCTION_TRACER=y. Link: https://lore.kernel.org/lkml/20210209210843.3af66662@canb.auug.org.au/ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jessica Yu <jeyu@kernel.org>
2021-02-11io_uring: move submit side state closer in the ringJens Axboe
We recently added the submit side req cache, but it was placed at the end of the struct. Move it near the other submission state for better memory placement, and reshuffle a few other members at the same time. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-11fs/jfs: fix potential integer overflow on shift of a intColin Ian King
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit arithmetic and then assigned to a signed 64 bit integer. In the case where l2nb is 32 or more this can lead to an overflow. Avoid this by shifting the value 1LL instead. Addresses-Coverity: ("Uninitentional integer overflow") Fixes: b40c2e665cd5 ("fs/jfs: TRIM support for JFS Filesystem") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2021-02-11cifs: Set CIFS_MOUNT_USE_PREFIX_PATH flag on setting cifs_sb->prepath.Shyam Prasad N
While debugging another issue today, Steve and I noticed that if a subdir for a file share is already mounted on the client, any new mount of any other subdir (or the file share root) of the same share results in sharing the cifs superblock, which e.g. can result in incorrect device name. While setting prefix path for the root of a cifs_sb, CIFS_MOUNT_USE_PREFIX_PATH flag should also be set. Without it, prepath is not even considered in some places, and output of "mount" and various /proc/<>/*mount* related options can be missing part of the device name. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
generated by cgit (git 2.34.1) at 2025-09-16 15:00:39 +0000