Age | Commit message (Collapse) | Author |
|
From [1]
"GCC 10 (PR 91233) won't silently allow registers that are not
architecturally available to be present in the clobber list anymore,
resulting in build failure for mips*r6 targets in form of:
...
.../sysdep.h:146:2: error: the register ‘lo’ cannot be clobbered in ‘asm’ for the current target
146 | __asm__ volatile ( \
| ^~~~~~~
This is because base R6 ISA doesn't define hi and lo registers w/o DSP
extension. This patch provides the alternative clobber list for r6 targets
that won't include those registers."
Since kernel 5.4 and mips support for generic vDSO [2], the kernel fail to
build for mips r6 cpus with gcc 10 for the same reason as glibc.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=020b2a97bb15f807c0482f0faee2184ed05bcad8
[2] '24640f233b46 ("mips: Add support for generic vDSO")'
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
make license from GPL3.0 to GPL2.0
Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
from Loongson-2K1000 user manual know that under pci bus
the device num is 4, function number is 2 and register is 0x2200
is ohci. the ohci interrupt number is 51. because Loongson-2K1000 has
64 interrupt sources, 0-31 correspond to the device tree liointc0 device
node, and the other correspond to liointc1 node. so it should be
number 19 correspon to liointc1.
Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Remove the inline asm with a DIVU instruction from `__div64_32' and use
plain C code for the intended DIVMOD calculation instead. GCC is smart
enough to know that both the quotient and the remainder are calculated
with single DIVU, so with ISAs up to R5 the same instruction is actually
produced with overall similar code.
For R6 compiled code will work, but separate DIVU and MODU instructions
will be produced, which are also interlocked, so scalar implementations
will likely not perform as well as older ISAs with their asynchronous MD
unit. Likely still faster then the generic algorithm though.
This removes a compilation error for R6 however where the original DIVU
instruction is not supported anymore and the MDU accumulator registers
have been removed and consequently GCC complains as to a constraint it
cannot find a register for:
In file included from ./include/linux/math.h:5,
from ./include/linux/kernel.h:13,
from mm/page-writeback.c:15:
./include/linux/math64.h: In function 'div_u64_rem':
./arch/mips/include/asm/div64.h:76:17: error: inconsistent operand constraints in an 'asm'
76 | __asm__("divu $0, %z1, %z2" \
| ^~~~~~~
./include/asm-generic/div64.h:245:25: note: in expansion of macro '__div64_32'
245 | __rem = __div64_32(&(n), __base); \
| ^~~~~~~~~~
./include/linux/math64.h:91:22: note: in expansion of macro 'do_div'
91 | *remainder = do_div(dividend, divisor);
| ^~~~~~
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0404s from 1.0445s with R3400
@40MHz. The module's MIPS I machine code has also shrunk by 12 bytes or
3 instructions.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The word is spelt with a final "d" of course. What a massive messup!
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
controller
There is a possible race condition vulnerability between issuing a HCI
command and removing the cont. Specifically, functions hci_req_sync()
and hci_dev_do_close() can race each other like below:
thread-A in hci_req_sync() | thread-B in hci_dev_do_close()
| hci_req_sync_lock(hdev);
test_bit(HCI_UP, &hdev->flags); |
... | test_and_clear_bit(HCI_UP, &hdev->flags)
hci_req_sync_lock(hdev); |
|
In this commit we alter the sequence in function hci_req_sync(). Hence,
the thread-A cannot issue th.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: Marcel Holtmann <marcel@holtmann.org>
Fixes: 7c6a329e4447 ("[Bluetooth] Fix regression from using default link policy")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DWC_usb32 IP introduces a new behavior when handling NoStream event for
IN endpoints. If the controller is capable of DEV_TXF_FLUSH_BYPASS, then
the driver does not need to force to restart stream for IN endpoints.
The controller will generate ERDY and restart the stream periodically.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/65c3070c666cd6b8beeee62d7f8e3e704ebf2d32.1619134559.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DWC_usb32 introduces a new HW capability register GHWPARAMS9. Capture
this in the dwc->hwparams.hwparams9 field.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/f76cc4a9c8c4ab325f5babe03c57b039166360b0.1619134559.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Newer Xen versions expose two Xen feature flags to tell us if the domain
is directly mapped or not. Only when a domain is directly mapped it
makes sense to enable swiotlb-xen on ARM.
Introduce a function on ARM to check the new Xen feature flags and also
to deal with the legacy case. Call the function xen_swiotlb_detect.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210319200140.12512-1-sstabellini@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Make AFS use the new netfs_write_begin() helper to do the pre-reading
required before the write. If successful, the helper returns with the
required page filled in and locked. It may read more than just one page,
expanding the read to meet cache granularity requirements as necessary.
Note: A more advanced version of this could be made that does
generic_perform_write() for a whole cache granule. This would make it
easier to avoid doing the download/read for the data to be overwritten.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588546422.3465195.1546354372589291098.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161539563244.286939.16537296241609909980.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653819291.2770958.406013201547420544.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789102743.6155.17396591236631761195.stgit@warthog.procyon.org.uk/ # v6
|
|
Make AFS use the new netfs read helpers to implement the VM read
operations:
- afs_readpage() now hands off responsibility to netfs_readpage().
- afs_readpages() is gone and replaced with afs_readahead().
- afs_readahead() just hands off responsibility to netfs_readahead().
These make use of the cache if a cookie is supplied, otherwise just call
the ->issue_op() method a sufficient number of times to complete the entire
request.
Changes:
v5:
- Use proper wait function for PG_fscache in afs_page_mkwrite()[1].
- Use killable wait for PG_writeback in afs_page_mkwrite()[1].
v4:
- Folded in error handling fixes to afs_req_issue_op().
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk [1]
Link: https://lore.kernel.org/r/160588542733.3465195.7526541422073350302.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118158436.1232039.3884845981224091996.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161053540.2537118.14904446369309535330.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340418739.1303470.5908092911600241280.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539561926.286939.5729036262354802339.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653817977.2770958.17696456811587237197.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789101258.6155.3879271028895121537.stgit@warthog.procyon.org.uk/ # v6
|
|
Use the 'success' and 'aborted' afs_operations_ops methods and add a
'failed' method to handle the completion of an AFS.FetchData,
AFS.FetchData64 or YFS.FetchData64 RPC operation rather than directly
calling the done func pointed to by the afs_read struct from the call
delivery handler.
This means the done function will be called back on error also, not just on
successful completion.
This allows motion towards asynchronous data reception on data fetch calls
and allows any error to be handed off to the fscache read helper in the
same place as a successful completion.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588541471.3465195.8807019223378490810.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118157260.1232039.6549085372718234792.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161052647.2537118.12922380836599003659.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340417106.1303470.3502017303898569631.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539560673.286939.391310781674212229.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653816367.2770958.5856904574822446404.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789099994.6155.473719823490561190.stgit@warthog.procyon.org.uk/ # v6
|
|
As a prelude to supporting transparent huge pages, use thp_size() and
similar rather than PAGE_SIZE/SHIFT.
Further, try and frame everything in terms of file positions and lengths
rather than page indices and numbers of pages.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588540227.3465195.4752143929716269062.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118155821.1232039.540445038028845740.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161051439.2537118.15577827510426326534.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340415869.1303470.6040191748634322355.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539559365.286939.18344613540296085269.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653815142.2770958.454490670311230206.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789098713.6155.16394227991842480300.stgit@warthog.procyon.org.uk/ # v6
|
|
Extract writeback extension into its own function to break up the writeback
function a bit.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588538471.3465195.782513375683399583.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118154610.1232039.1765365632920504822.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161050546.2537118.2202554806419189453.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340414102.1303470.9078891484034668985.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539558417.286939.2879469588895925399.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653813972.2770958.12671731209438112378.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789097132.6155.4916609419912731964.stgit@warthog.procyon.org.uk/ # v6
|
|
PG_fscache is going to be used to indicate that a page is being written to
the cache, and that the page should not be modified or released until it's
finished.
Make afs_invalidatepage() and afs_releasepage() wait for it.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/158861253957.340223.7465334678444521655.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465832417.1377938.3571599385208729791.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588536286.3465195.13231895135369807920.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118153708.1232039.3535103645871176749.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161049369.2537118.11591934943429117060.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340412903.1303470.6424701655031380012.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539556890.286939.5873470593519458598.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653812726.2770958.18167145829938766503.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789096241.6155.5907241930823579235.stgit@warthog.procyon.org.uk/ # v6
|
|
Use a single ITER_XARRAY iterator to describe the portion of a file to be
transmitted to the server rather than generating a series of small
ITER_BVEC iterators on the fly. This will make it easier to implement AIO
in afs.
In theory we could maybe use one giant ITER_BVEC, but that means
potentially allocating a huge array of bio_vec structs (max 256 per page)
when in fact the pagecache already has a structure listing all the relevant
pages (radix_tree/xarray) that can be walked over.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/153685395197.14766.16289516750731233933.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/158861251312.340223.17924900795425422532.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465828607.1377938.6903132788463419368.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588535018.3465195.14509994354240338307.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118152415.1232039.6452879415814850025.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161048194.2537118.13763612220937637316.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340411602.1303470.4661108879482218408.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539555629.286939.5241869986617154517.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653811456.2770958.7017388543246759245.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789095005.6155.6789055030327407928.stgit@warthog.procyon.org.uk/ # v6
|
|
afs_extract_data() sets up a temporary iov_iter and passes it to AF_RXRPC
each time it is called to describe the remaining buffer to be filled.
Instead:
(1) Put an iterator in the afs_call struct.
(2) Set the iterator for each marshalling stage to load data into the
appropriate places. A number of convenience functions are provided to
this end (eg. afs_extract_to_buf()).
This iterator is then passed to afs_extract_data().
(3) Use the new ITER_XARRAY iterator when reading data to load directly
into the inode's pages without needing to create a list of them.
This will allow O_DIRECT calls to be supported in future patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/152898380012.11616.12094591785228251717.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/153685394431.14766.3178466345696987059.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/153999787395.866.11218209749223643998.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/154033911195.12041.3882700371848894587.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/158861250059.340223.1248231474865140653.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465827399.1377938.11181327349704960046.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588533776.3465195.3612752083351956948.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118151238.1232039.17015723405750601161.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161047240.2537118.14721975104810564022.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340410333.1303470.16260122230371140878.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539554187.286939.15305559004905459852.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653810525.2770958.4630666029125411789.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789093719.6155.7877160739235087723.stgit@warthog.procyon.org.uk/ # v6
|
|
Log unmarshalling errors reported by the peer (ie. it can't parse what we
sent it). Limit the maximum number of messages to 3.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/159465826250.1377938.16372395422217583913.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588532584.3465195.15618385466614028590.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118149739.1232039.208060911149801695.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161046033.2537118.7779717661044373273.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340409118.1303470.17812607349396199116.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539552964.286939.16503232687974398308.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653808989.2770958.11530765353025697860.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789092349.6155.8581594259882708631.stgit@warthog.procyon.org.uk/ # v6
|
|
Don't truncate the iterator to correspond to the actual data size when
fetching the data from the server - rather, pass the length we want to read
to rxrpc.
This will allow the clear-after-read code in future to simply clear the
remaining iterator capacity rather than having to reinitialise the
iterator.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/158861249201.340223.13035445866976590375.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465825061.1377938.14403904452300909320.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588531418.3465195.10712005940763063144.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118148567.1232039.13380313332292947956.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161044610.2537118.17908520793806837792.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340407907.1303470.6501394859511712746.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539551721.286939.14655713136572200716.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653807790.2770958.14034599989374173734.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789090823.6155.15673999934535049102.stgit@warthog.procyon.org.uk/ # v6
|
|
Stash the key used to authenticate read operations in the afs_read struct.
This will be necessary to reissue the operation against the server if a
read from the cache fails in upcoming cache changes.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/158861248336.340223.1851189950710196001.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465823899.1377938.11925978022348532049.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588529557.3465195.7303323479305254243.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118147693.1232039.13780672951838643842.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161043340.2537118.511899217704140722.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340406678.1303470.12676824086429446370.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539550819.286939.1268332875889175195.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653806683.2770958.11300984379283401542.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789089556.6155.14603302893431820997.stgit@warthog.procyon.org.uk/ # v6
|
|
Print the afs_operation debug_id when logging an unexpected change in the
data version. This allows the logged message to be matched against
tracelines.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588528377.3465195.2206051235095182302.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118146111.1232039.11398082422487058312.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161042180.2537118.2471333561661033316.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340405772.1303470.3877167548944248214.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539549628.286939.15234870409714613954.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653805530.2770958.15120507632529970934.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789088290.6155.3494369629853673866.stgit@warthog.procyon.org.uk/ # v6
|
|
Pass a pointer to the page being accessed into the dirty region helpers so
that the size of the page can be determined in case it's a transparent huge
page.
This also required the page to be passed into the afs_page_dirty trace
point - so there's no need to specifically pass in the index or private
data as these can be retrieved directly from the page struct.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588527183.3465195.16107942526481976308.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118144921.1232039.11377711180492625929.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161040747.2537118.11435394902674511430.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340404553.1303470.11414163641767769882.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539548385.286939.8864598314493255313.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653804285.2770958.3497360004849598038.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789087043.6155.16922142208140170528.stgit@warthog.procyon.org.uk/ # v6
|
|
Disable use of the fscache I/O routined by the AFS filesystem. It's about
to transition to passing iov_iters down and fscache is about to have its
I/O path to use iov_iter, so all that needs to change.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/158861209824.340223.1864211542341758994.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465768717.1376105.2229314852486665807.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588457929.3465195.1730097418904945578.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118143744.1232039.2727898205333669064.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161039077.2537118.7986870854927176905.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340403323.1303470.8159439948319423431.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539547167.286939.3536238932531122332.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653802797.2770958.547311814861545911.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789085806.6155.2596146255056027428.stgit@warthog.procyon.org.uk/ # v6
|
|
The intent here was to return negative error codes but it actually
returns positive values. The problem is that type promotion with
ternary operations is quite complicated.
"ret" is an int. "copied" is a u32. And the snoop_file_read() function
returns long. What happens is that "ret" is cast to u32 and becomes
positive then it's cast to long and it's still positive.
Fix this by removing the ternary so that "ret" is type promoted directly
to long.
Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Venture <venture@google.com>
Link: https://lore.kernel.org/r/YIE90PSXsMTa2Y8n@mwanda
Link: https://lore.kernel.org/r/20210423000919.1249474-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add an alternate API by which the cache can be accessed through a kiocb,
doing async DIO, rather than using the current API that tells the cache
where all the pages are.
The new API is intended to be used in conjunction with the netfs helper
library. A filesystem must pick one or the other and not mix them.
Filesystems wanting to use the new API must #define FSCACHE_USE_NEW_IO_API
before #including the header. This prevents them from continuing to use
the old API at the same time as there are incompatibilities in how the
PG_fscache page bit is used.
Changes:
v6:
- Provide a routine to shape a write so that the start and length can be
aligned for DIO[3].
v4:
- Use the vfs_iocb_iter_read/write() helpers[1]
- Move initial definition of fscache_begin_read_operation() here.
- Remove a commented-out line[2]
- Combine ki->term_func calls in cachefiles_read_complete()[2].
- Remove explicit NULL initialiser[2].
- Remove extern on func decl[2].
- Put in param names on func decl[2].
- Remove redundant else[2].
- Fill out the kdoc comment for fscache_begin_read_operation().
- Rename fs/fscache/page2.c to io.c to match later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Christoph Hellwig <hch@lst.de>
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216102614.GA27555@lst.de/ [1]
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [2]
Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/161118142558.1232039.17993829899588971439.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161037850.2537118.8819808229350326503.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340402057.1303470.8038373593844486698.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539545919.286939.14573472672781434757.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653801477.2770958.10543270629064934227.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789084517.6155.12799689829859169640.stgit@warthog.procyon.org.uk/ # v6
|
|
Add a tracepoint to log internal failures (such as cache errors) that we
don't otherwise want to pass back to the netfs.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/161781048813.463527.1557000804674707986.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/161789082749.6155.15498680577213140870.stgit@warthog.procyon.org.uk/ # v6
|
|
Add an interface to the netfs helper library for reading data from the
cache instead of downloading it from the server and support for writing
data just downloaded or cleared to the cache.
The API passes an iov_iter to the cache read/write routines to indicate the
data/buffer to be used. This is done using the ITER_XARRAY type to provide
direct access to the netfs inode's pagecache.
When the netfs's ->begin_cache_operation() method is called, this must fill
in the cache_resources in the netfs_read_request struct, including the
netfs_cache_ops used by the helper lib to talk to the cache. The helper
lib does not directly access the cache.
Changes:
v6:
- Call trace_netfs_read() after beginning the cache op so that the cookie
debug ID can be logged[3].
- Don't record the error from writing to the cache. We don't want to pass
it back to the netfs[4].
- Fix copy-to-cache subreq amalgamation to not round up as it goes along
otherwise it overcalculates the length of the write[5].
v5:
- Use end_page_fscache() rather than unlock_page_fscache()[2].
v4:
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue (can't use in_softirq()[1]).
- Add missing inc of netfs_n_rh_read stat.
- Move initial definition of fscache_begin_read_operation() elsewhere.
- Need to call op->begin_cache_operation() from netfs_write_begin().
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1]
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2]
Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4]
Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5]
Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
|
|
Add a helper to do the pre-reading work for the netfs write_begin address
space op.
Changes
v6:
- Fixed a missing rreq put in netfs_write_begin()[3].
- Use DEFINE_READAHEAD()[4].
v5:
- Made the wait for PG_fscache in netfs_write_begin() killable[2].
v4:
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue (can't use in_softirq()[1]).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1]
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2]
Link: https://lore.kernel.org/r/161781042127.463527.9154479794406046987.stgit@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/1234933.1617886271@warthog.procyon.org.uk/ [4]
Link: https://lore.kernel.org/r/160588543960.3465195.2792938973035886168.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118140165.1232039.16418853874312234477.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161035539.2537118.15674887534950908530.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340398368.1303470.11242918276563276090.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539541541.286939.1889738674057013729.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653798616.2770958.17213315845968485563.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789080530.6155.1011847312392330491.stgit@warthog.procyon.org.uk/ # v6
|
|
Gather statistics from the netfs interface that can be exported through a
seqfile. This is intended to be called by a later patch when viewing
/proc/fs/fscache/stats.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/161118139247.1232039.10556850937548511068.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161034669.2537118.2761232524997091480.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340397101.1303470.17581910581108378458.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539539959.286939.6794352576462965914.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653797700.2770958.5801990354413178228.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789079281.6155.17141344853277186500.stgit@warthog.procyon.org.uk/ # v6
|
|
Add three tracepoints to track the activity of the read helpers:
(1) netfs/netfs_read
This logs entry to the read helpers and also expansion of the range in
a readahead request.
(2) netfs/netfs_rreq
This logs the progress of netfs_read_request objects which track
read requests. A read request may be a compound of multiple
subrequests.
(3) netfs/netfs_sreq
This logs the progress of netfs_read_subrequest objects, which track
the contributions from various sources to a read request.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/161118138060.1232039.5353374588021776217.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161033468.2537118.14021843889844001905.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340395843.1303470.7355519662919639648.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539538693.286939.10171713520419106334.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653796447.2770958.1870655382450862155.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789078003.6155.17814844411672989942.stgit@warthog.procyon.org.uk/ # v6
|
|
Add a pair of helper functions:
(*) netfs_readahead()
(*) netfs_readpage()
to do the work of handling a readahead or a readpage, where the page(s)
that form part of the request may be split between the local cache, the
server or just require clearing, and may be single pages and transparent
huge pages. This is all handled within the helper.
Note that while both will read from the cache if there is data present,
only netfs_readahead() will expand the request beyond what it was asked to
do, and only netfs_readahead() will write back to the cache.
netfs_readpage(), on the other hand, is synchronous and only fetches the
page (which might be a THP) it is asked for.
The netfs gives the helper parameters from the VM, the cache cookie it
wants to use (or NULL) and a table of operations (only one of which is
mandatory):
(*) expand_readahead() [optional]
Called to allow the netfs to request an expansion of a readahead
request to meet its own alignment requirements. This is done by
changing rreq->start and rreq->len.
(*) clamp_length() [optional]
Called to allow the netfs to cut down a subrequest to meet its own
boundary requirements. If it does this, the helper will generate
additional subrequests until the full request is satisfied.
(*) is_still_valid() [optional]
Called to find out if the data just read from the cache has been
invalidated and must be reread from the server.
(*) issue_op() [required]
Called to ask the netfs to issue a read to the server. The subrequest
describes the read. The read request holds information about the file
being accessed.
The netfs can cache information in rreq->netfs_priv.
Upon completion, the netfs should set the error, transferred and can
also set FSCACHE_SREQ_CLEAR_TAIL and then call
fscache_subreq_terminated().
(*) done() [optional]
Called after the pages have been unlocked. The read request is still
pinning the file and mapping and may still be pinning pages with
PG_fscache. rreq->error indicates any error that has been
accumulated.
(*) cleanup() [optional]
Called when the helper is disposing of a finished read request. This
allows the netfs to clear rreq->netfs_priv.
Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built
even if CONFIG_FSCACHE=n and in this case much of it should be optimised
away, allowing the filesystem to use it even when caching is disabled.
Changes:
v5:
- Comment why netfs_readahead() is putting pages[2].
- Use page_file_mapping() rather than page->mapping[2].
- Use page_index() rather than page->index[2].
- Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an
appropriate ref too[4].
v4:
- Folded in a kerneldoc comment fix.
- Folded in a fix for the error handling in the case that ENOMEM occurs.
- Added flag to netfs_subreq_terminated() to indicate that the caller may
have been running async and stuff that might sleep needs punting to a
workqueue (can't use in_softirq()[1]).
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1]
Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2]
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3]
Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4]
Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
|
|
Add set/end/wait_on_page_fscache() as aliases of
set/end/wait_page_private_2(). These allow a page to marked with
PG_fscache, the flag to be removed and waiters woken and waiting for the
flag to be cleared. A ref on the page is also taken and dropped.
[Linus suggested putting the fscache-themed functions into the
caching-specific headers rather than pagemap.h[1]]
Changes:
v5:
- Mirror the changes to the core routines[2].
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/1330473.1612974547@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/CAHk-=wjgA-74ddehziVk=XAEMTKswPu1Yw4uaro1R3ibs27ztw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/r/161340393568.1303470.4997526899111310530.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539536093.286939.5076448803512118764.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2]
Link: https://lore.kernel.org/r/161653793873.2770958.12157243390965814502.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789075327.6155.7432127924219092385.stgit@warthog.procyon.org.uk/ # v6
|
|
Move the PG_fscache related helper funcs (such as SetPageFsCache()) to
linux/netfs.h rather than linux/fscache.h as the intention is to move to a
model where they're used by the network filesystem and the helper library,
but not by fscache/cachefiles itself.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/161340392347.1303470.18065131603507621762.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539534516.286939.6265142985563005000.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653792959.2770958.5386546945273988117.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789073997.6155.18442271115255650614.stgit@warthog.procyon.org.uk/ # v6
|
|
Add interface documentation for the netfs helper library.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/161539533275.286939.6246011228676840978.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653791767.2770958.2012814194145060913.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789072591.6155.9448294406920216219.stgit@warthog.procyon.org.uk/ # v6
|
|
Make a netfs helper module to manage read request segmentation, caching
support and transparent huge page support on behalf of a network
filesystem.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/160588496284.3465195.10102643717770106661.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118135638.1232039.1622182202673126285.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161031028.2537118.1213974428943508753.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340391427.1303470.14884950716721956560.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539531569.286939.18317119181653706665.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653790328.2770958.6710423217716151549.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789071202.6155.16519256513958534906.stgit@warthog.procyon.org.uk/ # v6
|
|
Provide a function, readahead_expand(), that expands the set of pages
specified by a readahead_control object to encompass a revised area with a
proposed size and length.
The proposed area must include all of the old area and may be expanded yet
more by this function so that the edges align on (transparent huge) page
boundaries as allocated.
The expansion will be cut short if a page already exists in either of the
areas being expanded into. Note that any expansion made in such a case is
not rolled back.
This will be used by fscache so that reads can be expanded to cache granule
boundaries, thereby allowing whole granules to be stored in the cache, but
there are other potential users also.
Changes:
v6:
- Fold in a patch from Matthew Wilcox to tell the ondemand readahead
algorithm about the expansion so that the next readahead starts at the
right place[2].
v4:
- Moved the declaration of readahead_expand() to a better place[1].
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christoph Hellwig <hch@lst.de>
cc: Mike Marshall <hubcap@omnibond.com>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210217161358.GM2858050@casper.infradead.org/ [1]
Link: https://lore.kernel.org/r/20210407201857.3582797-4-willy@infradead.org/ [2]
Link: https://lore.kernel.org/r/159974633888.2094769.8326206446358128373.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588479816.3465195.553952688795241765.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118131787.1232039.4863969952441067985.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161028670.2537118.13831420617039766044.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340389201.1303470.14353807284546854878.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539530488.286939.18085961677838089157.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653789422.2770958.2108046612147345000.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789069829.6155.4295672417565512161.stgit@warthog.procyon.org.uk/ # v6
|
|
Filesystems are not currently permitted to modify the number of pages
in the ractl. An upcoming patch to add readahead_expand() changes that
rule, so remove the check and resync the loop counter after every call
to the filesystem.
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20210420200116.3715790-1-willy@infradead.org/
Link: https://lore.kernel.org/r/20210421170923.4005574-1-willy@infradead.org/ # v2
|
|
Turn the comments into kernel-doc and improve the wording slightly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/20210407201857.3582797-3-willy@infradead.org/
Link: https://lore.kernel.org/r/161789068619.6155.1397999970593531574.stgit@warthog.procyon.org.uk/ # v6
|
|
For readahead_expand(), we need to modify the file ra_state, so pass it
down by adding it to the ractl. We have to do this because it's not always
the same as f_ra in the struct file that is already being passed.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/20210407201857.3582797-2-willy@infradead.org/
Link: https://lore.kernel.org/r/161789067431.6155.8063840447229665720.stgit@warthog.procyon.org.uk/ # v6
|
|
Add three functions to manipulate PG_private_2:
(*) set_page_private_2() - Set the flag and take an appropriate reference
on the flagged page.
(*) end_page_private_2() - Clear the flag, drop the reference and wake up
any waiters, somewhat analogously with end_page_writeback().
(*) wait_on_page_private_2() - Wait for the flag to be cleared.
Wrappers will need to be placed in the netfs lib header in the patch that
adds that.
[This implements a suggestion by Linus[1] to not mix the terminology of
PG_private_2 and PG_fscache in the mm core function]
Changes:
v7:
- Use compound_head() in all the functions to make them THP safe[6].
v5:
- Add set and end functions, calling the end function end rather than
unlock[3].
- Keep a ref on the page when PG_private_2 is set[4][5].
v4:
- Remove extern from the declaration[2].
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christoph Hellwig <hch@lst.de>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/1330473.1612974547@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/CAHk-=wjgA-74ddehziVk=XAEMTKswPu1Yw4uaro1R3ibs27ztw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/r/20210216102659.GA27714@lst.de/ [2]
Link: https://lore.kernel.org/r/161340387944.1303470.7944159520278177652.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539528910.286939.1252328699383291173.stgit@warthog.procyon.org.uk # v4
Link: https://lore.kernel.org/r/20210321105309.GG3420@casper.infradead.org [3]
Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4]
Link: https://lore.kernel.org/r/CAHk-=wjSGsRj7xwhSMQ6dAQiz53xA39pOG+XA_WeTgwBBu4uqg@mail.gmail.com/ [5]
Link: https://lore.kernel.org/r/20210408145057.GN2531743@casper.infradead.org/ [6]
Link: https://lore.kernel.org/r/161653788200.2770958.9517755716374927208.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789066013.6155.9816857201817288382.stgit@warthog.procyon.org.uk/ # v6
|
|
Add an iterator, ITER_XARRAY, that walks through a set of pages attached to
an xarray, starting at a given page and offset and walking for the
specified amount of bytes. The iterator supports transparent huge pages.
The iterate_xarray() macro calls the helper function with rcu_access()
helped. I think that this is only a problem for iov_iter_for_each_range()
- and that returns an error for ITER_XARRAY (also, this function does not
appear to be called).
The caller must guarantee that the pages are all present and they must be
locked using PG_locked, PG_writeback or PG_fscache to prevent them from
going away or being migrated whilst they're being accessed.
This is useful for copying data from socket buffers to inodes in network
filesystems and for transferring data between those inodes and the cache
using direct I/O.
Whilst it is true that ITER_BVEC could be used instead, that would require
a bio_vec array to be allocated to refer to all the pages - which should be
redundant if inode->i_pages also points to all these pages.
Note that older versions of this patch implemented an ITER_MAPPING instead,
which was almost the same.
Changes:
v7:
- Rename iter_xarray_copy_pages() to iter_xarray_populate_pages()[1].
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: Christoph Hellwig <hch@lst.de>
cc: linux-mm@kvack.org
cc: linux-cachefs@redhat.com
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/3577430.1579705075@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/158861205740.340223.16592990225607814022.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465785214.1376674.6062549291411362531.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588477334.3465195.3608963255682568730.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118129703.1232039.17141248432017826976.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161026313.2537118.14676007075365418649.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340386671.1303470.10752208972482479840.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539527815.286939.14607323792547049341.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653786033.2770958.14154191921867463240.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789064740.6155.11932541175173658065.stgit@warthog.procyon.org.uk/ # v6
Link: https://lore.kernel.org/r/27c369a8f42bb8a617672b2dc0126a5c6df5a050.camel@kernel.org [1]
|
|
The cache function can be turned ON and OFF by writing to the CACHE_CTRL
byte (EXT_CSD byte [33]). However, card->ext_csd.cache_ctrl is only
set on init if cache size > 0.
Fix that by explicitly setting ext_csd.cache_ctrl on ext-csd write.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210420134641.57343-3-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
There's no point in comparing SBDF - we can simply compare the struct
pci_dev pointers. If they weren't the same for a given device, we'd have
bigger problems from having stored a stale pointer.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/158273a2-d1b9-3545-b25d-affca867376c@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
DPDK default burst size is 32, however, kernel xsk sendto
syscall can not handle all 32 at one time, and return with
error.
So make kernel XDP socket batch size larger to avoid
unnecessary syscall fail and context switch which will help
to increase performance.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/1618378752-4191-1-git-send-email-lirongqing@baidu.com
|
|
Fix misspelling of "physical".
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210126205509.2917606-1-helgaas@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Prior to commit 4a8c31a1c6f5 ("xen/blkback: rework connect_ring() to avoid
inconsistent xenstore 'ring-page-order' set by malicious blkfront"), the
behaviour of xen-blkback when connecting to a frontend was:
- read 'ring-page-order'
- if not present then expect a single page ring specified by 'ring-ref'
- else expect a ring specified by 'ring-refX' where X is between 0 and
1 << ring-page-order
This was correct behaviour, but was broken by the afforementioned commit to
become:
- read 'ring-page-order'
- if not present then expect a single page ring (i.e. ring-page-order = 0)
- expect a ring specified by 'ring-refX' where X is between 0 and
1 << ring-page-order
- if that didn't work then see if there's a single page ring specified by
'ring-ref'
This incorrect behaviour works most of the time but fails when a frontend
that sets 'ring-page-order' is unloaded and replaced by one that does not
because, instead of reading 'ring-ref', xen-blkback will read the stale
'ring-ref0' left around by the previous frontend will try to map the wrong
grant reference.
This patch restores the original behaviour.
Fixes: 4a8c31a1c6f5 ("xen/blkback: rework connect_ring() to avoid inconsistent xenstore 'ring-page-order' set by malicious blkfront")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: "Roger Pau Monné" <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20210202175659.18452-1-paul@xen.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Commit 76fc253723ad ("xen/acpi-stub: Disable it b/c the acpi_processor_add
is no longer called.") declared as BROKEN support for Xen ACPI stub (which
is required for xen-acpi-{cpu|memory}-hotplug) and suggested that this
is temporary and will be soon fixed. This was in March 2013.
Further, commit cfafae940381 ("xen: rename dom0_op to platform_op")
renamed an interface used by memory hotplug code without updating that
code (as it was BROKEN and therefore not compiled). This was
in November 2015 and has gone unnoticed for over 5 year.
It is now clear that this code is of no interest to anyone and therefore
should be removed.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1618336344-3162-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In order to use the same driver on non-OF platforms, make
of_mmc_spi.c resource provider agnostic.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210419112459.25241-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
SPI core already parses and maps IRQ for us if provided.
Use it instead of double parsing in mmc_spi_get_pdata().
Due to above, change condition, since SPI core can hold
an error pointer as invalid IRQ.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210419112459.25241-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
After the commit 073350f7b562 ("mmc: mmc_spi: Fix return value evaluation of
irq_of_parse_and_map()") the NO_IRQ is not used anymore, drop it for good.
Fixes: 073350f7b562 ("mmc: mmc_spi: Fix return value evaluation of irq_of_parse_and_map()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210419112459.25241-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|