summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-03arm64: dts: renesas: r8a7796: Add EthernetAVB instanceLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03arm64: dts: r8a7796: salvator-x: Update memory node to 4 GiB mapTakeshi Kihara
This patch updates memory region: - After changes, the new map of the Salvator-X board on R8A7796 SoC Bank0: 2GiB RAM : 0x000048000000 -> 0x000bfffffff Bank1: 2GiB RAM : 0x000600000000 -> 0x0067fffffff - Before changes, the old map looked like this: Bank0: 2GiB RAM : 0x000048000000 -> 0x000bfffffff Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Correct size of old map] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03drm/i915: Don't clflush before release phys objectChris Wilson
When we teardown the backing storage for the phys object, we copy from the coherent contiguous block back to the shmemfs object, clflushing as we go. Trying to clflush the invalid sg beforehand just oops and would be redundant (due to it already being coherent, and clflushed afterwards). Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-3-chris@chris-wilson.co.uk (cherry picked from commit e5facdf9644f4490520e0489a0252e8feaba3744) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-01-03arm64: dts: r8a7796: Use R-Car Gen 3 fallback binding for i2c nodesSimon Horman
Use recently added R-Car Gen 3 fallback binding for i2c nodes in DT for r8a7796 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7796 and the fallback binding for R-Car Gen 3. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-01-03arm64: dts: r8a7795: Use R-Car Gen 3 fallback binding for i2c nodesSimon Horman
Use recently added R-Car Gen 3 fallback binding for i2c nodes in DT for r8a7795 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7795 and the fallback binding for R-Car Gen 3. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-01-03arm64: dts: r8a7795: Use Gen 3 fallback compat string for PCIESimon Horman
Use recently added en 3 fallback compat string for PCIE in r8a7795 DT. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-01-03arm64: dts: r8a7795: add sound MIX supportKuninori Morimoto
This patch adds MIX (= Mixer) support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03arm64: dts: r8a7795: add sound CTU supportKuninori Morimoto
This patch adds CTU (= Channel Transfer Unit) support which is needed to sound mixing. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03drm/i915: Fix oops in overlay due to frontbuffer trackingVille Syrjälä
The vma will be NULL if the overlay was previously off, so dereferencing it will oops. Check for NULL before doing that. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Fixes: 9b3b7841b86d ("drm/i915/overlay: Use VMA as the primary tracker for images") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481131693-27993-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 4a15cdbbc55463e55a7cdcf33f84ccc742ca9c29) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-01-03arm64: dts: r8a7795: Use renesas,rcar-gen3-usb2-phy fallback bindingSimon Horman
A fallback binding for the Renesas R-Car Gen3 for USB2.0 PHY driver was added by commit cde7bc367f09 ("phy: rcar-gen3-usb2: add fallback binding"). This patch makes use of this binding in the DT for the r8a7795 SoC. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-01-03arm64: renesas: r8a7796/salvator-x: Add board part number to DT bindingsGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03arm64: dts: r8a7796: Add CAN FD supportChris Paterson
Adds CAN FD controller node for r8a7796. Based on a patch for r8a7795 by Ramesh Shanmugasundaram. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03arm64: dts: r8a7796: Add CAN supportChris Paterson
Adds CAN controller nodes for r8a7796. Based on a patch for r8a7795 by Ramesh Shanmugasundaram. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03arm64: dts: r8a7796: Add CAN external clock supportChris Paterson
Adds external CAN clock node for r8a7796. This clock can be used as fCAN clock of CAN and CAN FD controller. Based on a patch for r8a7795 by Ramesh Shanmugasundaram. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03arm64: dts: r8a7796: Add all MSIOF nodesGeert Uytterhoeven
Add the device nodes for all MSIOF SPI controllers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-01-03drm/i915: Fix oopses in the overlay code due to i915_gem_active stuffVille Syrjälä
The i915_gem_active stuff doesn't like a NULL ->retire hook, but the overlay code can set it to NULL. That obviously ends up oopsing. Fix it by introducing a new helper to assign the retirement callback that will switch out the NULL function pointer with i915_gem_retire_noop. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Fixes: 0d9bdd886f29 ("drm/i915: Convert intel_overlay to request tracking") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20161207175647.10018-1-chris@chris-wilson.co.uk (cherry picked from commit ecd9caa0522db5a6b03ac8858c42067ef9d8323b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-01-03drm/i915: Initialize overlay->last_flip properlyVille Syrjälä
Initialize overlay->last_flip properly instead of leaving it zeroed. Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 0d9bdd886f29 ("drm/i915: Convert intel_overlay to request tracking") Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161221144547.27319-1-ville.syrjala@linux.intel.com (cherry picked from commit 330afdb1df0f3fb48583105493a8f4f8d9e3af36) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-01-03drm/i915: Move the min_pixclk[] handling to the end of readoutVille Syrjälä
Trying to determine the pixel rate of the pipe can't be done until we know the clock, which means it can't be done until the encoder .get_config() hooks have been called. So let's move the min_pixclk[] stuff to the end of intel_modeset_readout_hw_state() when we actually have gathered all the required infromation. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Fixes: 565602d7501a ("drm/i915: Do not acquire crtc state to check clock during modeset, v4.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161220153902.15621-1-ville.syrjala@linux.intel.com Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (cherry picked from commit aca1ebf491518910df156f3dab6a66306bb52e28) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-01-03drm/i915: Force VDD off on the new power seqeuencer before starting to use itVille Syrjälä
Apparently some VLV BIOSen like to leave the VDD force bit enabled even for power seqeuncers that aren't properly hooked up to any port. That will result in a imbalance in the AUX power domain refcount when we stat to use said power sequencer as edp_panel_vdd_on() will not grab the power domain reference if it sees that the VDD is already on. To fix this let's make sure we turn off the VDD force bit when we initialize the power sequencer registers. That is, unless it's being done from the init path since there we are actually initializing the registers for the current power sequencer and we don't want to turn VDD off needlessly as that would require waiting for the power cycle delay before we turn it back on. This fixes the following kind of warnings: WARNING: CPU: 0 PID: 123 at ../drivers/gpu/drm/i915/intel_runtime_pm.c:1455 intel_display_power_put+0x13a/0x170 [i915]() WARN_ON(!power_domains->domain_use_count[domain]) ... v2: Fix typos in comment (David) Cc: stable@vger.kernel.org Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98695 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161220165117.24801-1-ville.syrjala@linux.intel.com Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> (cherry picked from commit 5d5ab2d26f32bdaa5872b938658e0bf8d341bc4c) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-01-03ARM: dts: imx6: Disable "weim" node in the dtsi filesFabio Estevam
Commit 1be81ea5860744520 ("ARM: dts: imx6: Add imx-weim parameters to dtsi's") causes the following probe error when the weim node is not present on the board dts (such as imx6q-sabresd): imx-weim 21b8000.weim: Invalid 'ranges' configuration imx-weim: probe of 21b8000.weim failed with error -22 There is no need to always enable the "weim" node on mx6. Do the same as in the other i.MX dtsi files where "weim" is disabled and only gets enabled on a per dts basis. All the imx6 weim dts users explicitily provide 'status = "okay"', so this change has no impact on current imx6 weim users. If a board does not use the weim driver it will not describe its 'ranges' property, so simply disable the 'weim' node in the imx6 dtsi files to avoid such probe error message. Fixes: 1be81ea5860744520 ("ARM: dts: imx6: Add imx-weim parameters to dtsi's") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-02Merge tag 'fscrypt-for-stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt Pull fscrypt fixes from Ted Ts'o: "Two fscrypt bug fixes, one of which was unmasked by an update to the crypto tree during the merge window" * tag 'fscrypt-for-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: fix renaming and linking special files fscrypt: fix the test_dummy_encryption mount option
2017-01-03PM / devfreq: exynos-bus: Fix the wrong return valueChanwoo Choi
This patch fixes the wrong return value. If devfreq driver requires the wrong and non-available governor, it is fail. So, this patch returns the error insead of -EPROBE_DEFER. Fixes: 403e0689d2a9 (PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-03PM / devfreq: Fix the bug of devfreq_add_device when governor is NULLChanwoo Choi
This patch fixes the bug of devfreq_add_device(). The devfreq device must have the default governor. If find_devfreq_governor() returns error, devfreq_add_device() fail to add the devfreq instance. Fixes: 1b5c1be2c88e (PM / devfreq: map devfreq drivers to governor using name) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-03MAINTAINERS: Add myself as reviewer for DEVFREQ subsystem supportChanwoo Choi
Add myself to the DEVFREQ entry as reviewer, I've been helping reviewing and tesing the devfreq support patches for the couple of years. Also, I'm going to contribute the improvement for devfreq subsystem. It would be easier for me for review if I'm cc'ed for patches. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-03PM / docs: Drop confusing kernel-doc references from infrastructure.rstRafael J. Wysocki
The references to drivers/base/power/main.c and drivers/acpi/scan.c from Documentation/driver-api/infrastructure.rst are confusing. They both cause descriptions of functions that are not relevant to device drivers at all to be generated and none of them is sufficient to cover the API in a meaningful way. Drop them for now. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jonathan Corbet <corbet@lwn.net>
2017-01-02ACPI / scan: Prefer devices without _HID/_CID for _ADR matchingRafael J. Wysocki
The way acpi_find_child_device() works currently is that, if there are two (or more) devices with the same _ADR value in the same namespace scope (which is not specifically allowed by the spec and the OS behavior in that case is not defined), the first one of them found to be present (with the help of _STA) will be returned. This covers the majority of cases, but is not sufficient if some of the devices in question have a _HID (or _CID) returning some valid ACPI/PNP device IDs (which is disallowed by the spec) and the ASL writers' expectation appears to be that the OS will match devices without a valid ACPI/PNP device ID against a given bus address first. To cover this special case as well, modify find_child_checks() to prefer devices without ACPI/PNP device IDs over devices that have them. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
2017-01-02Documentation/networking: fix typo in mpls-sysctlAlexander Alemayhu
s/utliziation/utilization Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - regression fix (caused by me applying a wrong version of patch) for sensor-hub driver, from Srinivas Pandruvada - hid-sony fixes (mostly related to DS4 device) from Roderick Colenbrander - three device-specific quirks-fixes from Alex Wood, Brendan McGrath and Marcel Hasler * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: sensor-hub: Move the memset to sensor_hub_get_feature() HID: usbhid: Add quirk for Mayflash/Dragonrise DolphinBar. HID: usbhid: Add quirk for the Futaba TOSD-5711BB VFD HID: sony: Ignore DS4 dongle reports when no device is connected HID: sony: Use DS4 MAC address as unique identifier on USB HID: sony: Fix error handling bug when touchpad registration fails HID: asus: Fix keyboard support
2017-01-02arm64: dts: exynos: Add support of bus frequency using VDD_INT on Exynos5433 TM2Chanwoo Choi
This patch adds the bus Device-tree nodes for INT (Internal) block and enables the bus frequency scaling. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-02arm64: dts: exynos: Add bus nodes using VDD_INT for Exynos5433Chanwoo Choi
This patch adds the AMBA AXI bus nodes using VDD_INT for Exynos5433 SoC. Following list specify the detailed correlation between sub-block and clock: - CLK_ACLK_G2D_{400|266} : Bus clock for G2D (2D graphic engine) - CLK_ACLK_MSCL_400 : Bus clock for MSCL (Memory to memory Scaler) - CLK_ACLK_GSCL_333 : Bus clock for GSCL (General Scaler) - CLK_SCLK_JPEG_MSCL : Bus clock for JPEG - CLK_ACLK_MFC_400 : Bus clock for MFC (Multi Format Codec) - CLK_ACLK_HEVC_400 : Bus clock for HEVC (High Efficient Video Codec) - CLK_ACLK_BUS0_400 : NoC's (Network On Chip) bus clock for PERIC/PERIS/FSYS/MSCL - CLK_ACLK_BUS1_400 : NoC's bus clock for MFC/HEVC/G3D - CLK_ACLK_BUS2_400 : NoC's bus clock for GSCL/DISP/G2D/CAM0/CAM1/ISP Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-02arm64: dts: exynos: Add PPMU node to Exynos5433Chanwoo Choi
This patch adds PPMU (Platform Performance Monitoring Unit) Device-tree node to measure the utilization of each IP in Exynos SoC. - PPMU_D{0|1}_CPU are used to measure the utilization of MIF (Memory Interface) block with VDD_MIF power source. - PPMU_D{0|1}_GENERAL are used to measure the utilization of INT(Internal) block with VDD_INT power source. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-02hwmon: (lm90) fix temp1_max_alarm attributeMichael Walle
Since commit commit eb1c8f4325d5 ("hwmon: (lm90) Convert to use new hwmon registration API") the temp1_max_alarm and temp1_crit_alarm attributes are mapped to the same alarm bit. Fix the typo. Fixes: eb1c8f4325d5 ("hwmon: (lm90) Convert to use new hwmon registration API") Signed-off-by: Micehael Walle <michael@walle.cc> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-01-02igmp: Make igmp group member RFC 3376 compliantMichal Tesar
5.2. Action on Reception of a Query When a system receives a Query, it does not respond immediately. Instead, it delays its response by a random amount of time, bounded by the Max Resp Time value derived from the Max Resp Code in the received Query message. A system may receive a variety of Queries on different interfaces and of different kinds (e.g., General Queries, Group-Specific Queries, and Group-and-Source-Specific Queries), each of which may require its own delayed response. Before scheduling a response to a Query, the system must first consider previously scheduled pending responses and in many cases schedule a combined response. Therefore, the system must be able to maintain the following state: o A timer per interface for scheduling responses to General Queries. o A per-group and interface timer for scheduling responses to Group- Specific and Group-and-Source-Specific Queries. o A per-group and interface list of sources to be reported in the response to a Group-and-Source-Specific Query. When a new Query with the Router-Alert option arrives on an interface, provided the system has state to report, a delay for a response is randomly selected in the range (0, [Max Resp Time]) where Max Resp Time is derived from Max Resp Code in the received Query message. The following rules are then used to determine if a Report needs to be scheduled and the type of Report to schedule. The rules are considered in order and only the first matching rule is applied. 1. If there is a pending response to a previous General Query scheduled sooner than the selected delay, no additional response needs to be scheduled. 2. If the received Query is a General Query, the interface timer is used to schedule a response to the General Query after the selected delay. Any previously pending response to a General Query is canceled. --8<-- Currently the timer is rearmed with new random expiration time for every incoming query regardless of possibly already pending report. Which is not aligned with the above RFE. It also might happen that higher rate of incoming queries can postpone the report after the expiration time of the first query causing group membership loss. Now the per interface general query timer is rearmed only when there is no pending report already scheduled on that interface or the newly selected expiration time is before the already pending scheduled report. Signed-off-by: Michal Tesar <mtesar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02flow_dissector: Update pptp handling to avoid null pointer deref.Ian Kumlien
__skb_flow_dissect can be called with a skb or a data packet, either can be NULL. All calls seems to have been moved to __skb_header_pointer except the pptp handling which is still calling skb_header_pointer. skb_header_pointer will use skb->data and thus: [ 109.556866] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [ 109.557102] IP: [<ffffffff88dc02f8>] __skb_flow_dissect+0xa88/0xce0 [ 109.557263] PGD 0 [ 109.557338] [ 109.557484] Oops: 0000 [#1] SMP [ 109.557562] Modules linked in: chaoskey [ 109.557783] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0 #79 [ 109.557867] Hardware name: Supermicro A1SRM-LN7F/LN5F/A1SRM-LN7F-2758, BIOS 1.0c 11/04/2015 [ 109.557957] task: ffff94085c27bc00 task.stack: ffffb745c0068000 [ 109.558041] RIP: 0010:[<ffffffff88dc02f8>] [<ffffffff88dc02f8>] __skb_flow_dissect+0xa88/0xce0 [ 109.558203] RSP: 0018:ffff94087fc83d40 EFLAGS: 00010206 [ 109.558286] RAX: 0000000000000130 RBX: ffffffff8975bf80 RCX: ffff94084fab6800 [ 109.558373] RDX: 0000000000000010 RSI: 000000000000000c RDI: 0000000000000000 [ 109.558460] RBP: 0000000000000b88 R08: 0000000000000000 R09: 0000000000000022 [ 109.558547] R10: 0000000000000008 R11: ffff94087fc83e04 R12: 0000000000000000 [ 109.558763] R13: ffff94084fab6800 R14: ffff94087fc83e04 R15: 000000000000002f [ 109.558979] FS: 0000000000000000(0000) GS:ffff94087fc80000(0000) knlGS:0000000000000000 [ 109.559326] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 109.559539] CR2: 0000000000000080 CR3: 0000000281809000 CR4: 00000000001026e0 [ 109.559753] Stack: [ 109.559957] 000000000000000c ffff94084fab6822 0000000000000001 ffff94085c2b5fc0 [ 109.560578] 0000000000000001 0000000000002000 0000000000000000 0000000000000000 [ 109.561200] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 109.561820] Call Trace: [ 109.562027] <IRQ> [ 109.562108] [<ffffffff88dfb4fa>] ? eth_get_headlen+0x7a/0xf0 [ 109.562522] [<ffffffff88c5a35a>] ? igb_poll+0x96a/0xe80 [ 109.562737] [<ffffffff88dc912b>] ? net_rx_action+0x20b/0x350 [ 109.562953] [<ffffffff88546d68>] ? __do_softirq+0xe8/0x280 [ 109.563169] [<ffffffff8854704a>] ? irq_exit+0xaa/0xb0 [ 109.563382] [<ffffffff8847229b>] ? do_IRQ+0x4b/0xc0 [ 109.563597] [<ffffffff8902d4ff>] ? common_interrupt+0x7f/0x7f [ 109.563810] <EOI> [ 109.563890] [<ffffffff88d57530>] ? cpuidle_enter_state+0x130/0x2c0 [ 109.564304] [<ffffffff88d57520>] ? cpuidle_enter_state+0x120/0x2c0 [ 109.564520] [<ffffffff8857eacf>] ? cpu_startup_entry+0x19f/0x1f0 [ 109.564737] [<ffffffff8848d55a>] ? start_secondary+0x12a/0x140 [ 109.564950] Code: 83 e2 20 a8 80 0f 84 60 01 00 00 c7 04 24 08 00 00 00 66 85 d2 0f 84 be fe ff ff e9 69 fe ff ff 8b 34 24 89 f2 83 c2 04 66 85 c0 <41> 8b 84 24 80 00 00 00 0f 49 d6 41 8d 31 01 d6 41 2b 84 24 84 [ 109.569959] RIP [<ffffffff88dc02f8>] __skb_flow_dissect+0xa88/0xce0 [ 109.570245] RSP <ffff94087fc83d40> [ 109.570453] CR2: 0000000000000080 Fixes: ab10dccb1160 ("rps: Inspect PPTP encapsulated by GRE to get flow hash") Signed-off-by: Ian Kumlien <ian.kumlien@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02Merge tag 'mac80211-for-davem-2017-01-02' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A single fix to avoid loading an skb->cb pointer too early. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Two bug fixes for 4.10-rc3" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/kbuild: enable modversions for symbols exported from asm s390/vtime: correct system time accounting
2017-01-02parisc: Add line-break when printing segfault infoHelge Deller
Add a leading line break else printed line gets too long. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v4.9
2017-01-02Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull Openrisc fix from Stafford Horne: "There was nothing much interesting here except a build fix pointed out by the test robots. Highlight: - Defined _text symbol to fix build error" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: Add _text symbol to fix ksym build error
2017-01-02block: Avoid that sparse complains about context imbalance in __wbt_wait()Bart Van Assche
This patch does not change any functionality. Fixes: e34cbd307477 ("blk-wbt: add general throttling mechanism") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-02ARM: dts: qcom: apq8064: Add missing scm clockBjorn Andersson
As per the device tree binding the apq8064 scm node requires the core clock to be specified, so add this. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-01-02block: Make wbt_wait() definition consistent with declarationBart Van Assche
Fixes: e34cbd307477 ("blk-wbt: add general throttling mechanism") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-02clean_bdev_aliases: Prevent cleaning blocks that are not in block rangeChandan Rajendra
The first block to be cleaned may start at a non-zero page offset. In such a scenario clean_bdev_aliases() will end up cleaning blocks that do not fall in the range of blocks to be cleaned. This commit fixes the issue by skipping blocks that do not fall in valid block range. Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-02Merge tag 'iio-fixes-for-4.10a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 4.10 cycle. * 104-quad-8 - Fix selecting wrong register when the index control register is desired. - Fix an off by one error when addressing the input/output control register. - Fix inverted logic on the active high / low control * bmi160 - Sleep for worst case rather than best case amount of time after cmd execution begins. * max44000 - typo fix in illuminance_integration_time_available listing. * st-sensors - Fix channel data passing. This one took a while to get tested on 24bit parts. Definitely one for stable asap as the bug broke quite a few parts. - lis3lv02 needs a data alignment bit set and the scaling was wrong. * ti_am335x - depend on HAS_DMA
2017-01-02HID: sensor-hub: Move the memset to sensor_hub_get_feature()Srinivas Pandruvada
While applying patch d443a0aa3a29: "HID: hid-sensor-hub: clear memory to avoid random data", there was some issues in applying correct version of the patch. This resulted in the breakage of sensor functions as all request like power-up will be reset by the memset() in the function sensor_hub_set_feature(). The reset of caller buffer should be in the function sensor_hub_get_feature(), not in the sensor_hub_set_feature(). Fixes: d443a0aa3a29 ("HID: hid-sensor-hub: clear memory to avoid random data") Cc: Stable <stable@vger.kernel.org> # 4.9+ Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-02HID: usbhid: Add quirk for Mayflash/Dragonrise DolphinBar.Marcel Hasler
The DolphinBar by Mayflash (identified as Dragonrise) needs HID_QUIRK_MULTI_INPUT to split it up into four input devices. Without this quirk the adapter is falsely recognized as a tablet. See also bug 115841 (https://bugzilla.kernel.org/show_bug.cgi?id=115841). Signed-off-by: Marcel Hasler <mahasler@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-02HID: usbhid: Add quirk for the Futaba TOSD-5711BB VFDAlex Wood
The Futaba TOSD-5711BB VFD crashes when the initial HID report is requested, register the display in hid-ids and tell hid-quirks to not do the init. Signed-off-by: Alex Wood <thetewood@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-02ARM: davinci: da8xx: Fix sleeping function called from invalid contextAlexandre Bailon
Everytime the usb20 phy is enabled, there is a "sleeping function called from invalid context" BUG. In addition, there is a recursive locking happening because of the recurse call to clk_enable(). clk_enable() from arch/arm/mach-davinci/clock.c uses spin_lock_irqsave() before to invoke the callback usb20_phy_clk_enable(). usb20_phy_clk_enable() uses clk_get() and clk_enable_prepapre() which may sleep. Replace clk_prepare_enable() by davinci_clk_enable(). Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Suggested-by: David Lechner <david@lechnology.com> [nsekhar@ti.com: minor commit description adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-02ARM: davinci: Make __clk_{enable,disable} functions publicAlexandre Bailon
In some cases, there is a need to enable a clock as part of clock enable callback of a different clock. For example, USB 2.0 PHY clock enable requires USB 2.0 clock to be enabled. In this case, it is safe to instead call __clk_enable() since the clock framework lock is already taken. Calling clk_enable() causes recursive locking error. A similar case arises in the clock disable path. To enable such usage, make __clk_{enable,disable} functions publicly available outside of clock.c. Also, call them davinci_clk_{enable|disable} now to be consistent with how other davinci-specific clock functions are named. Note that these functions are not exported to drivers. They are meant for usage in platform specific clock management code. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Suggested-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-02mac80211: initialize fast-xmit 'info' laterJohannes Berg
In ieee80211_xmit_fast(), 'info' is initialized to point to the skb that's passed in, but that skb may later be replaced by a clone (if it was shared), leading to an invalid pointer. This can lead to use-after-free and also later crashes since the real SKB's info->hw_queue doesn't get initialized properly. Fix this by assigning info only later, when it's needed, after the skb replacement (may have) happened. Cc: stable@vger.kernel.org Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-02USB: serial: f81534: detect errors from f81534_logic_to_phy_port()Geert Uytterhoeven
With gcc 4.1.2: drivers/usb/serial/f81534.c: In function ‘f81534_port_probe’: drivers/usb/serial/f81534.c:1250: warning: comparison is always false due to limited range of data type f81534_logic_to_phy_port() may return a negative error value, which is ignored by assigning it to u8 f81534_port_private.phy_num. Use an intermediate variable of type int to fix this. While at it, forward the actual error code instead of converting it to -ENODEV, and drop the useless check for F81534_NUM_PORT, as the callee always returns a valid port number in case of success. Fixes: 0c9bd6004d258d46 ("USB: serial: add Fintek F81532/534 driver") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 16:39:43 +0000