summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-13NTB: Fix access to link status and control registerArindam Nath
The design of AMD NTB implementation is such that NTB primary acts as an endpoint device and NTB secondary is an endpoint device behind a combination of Switch Upstream and Switch Downstream. Considering that, the link status and control register needs to be accessed differently based on the NTB topology. So in the case of NTB secondary, we first get the pointer to the Switch Downstream device for the NTB device. Then we get the pointer to the Switch Upstream device. Once we have that, we read the Link Status and Control register to get the correct status of link at the secondary. In the case of NTB primary, simply reading the Link Status and Control register of the NTB device itself will suffice. Suggested-by: Jiasen Lin <linjiasen@hygon.cn> Signed-off-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13MAINTAINERS: update maintainer list for AMD NTB driverSanjay R Mehta
updating with my email address. Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: ntb_transport: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Fixes: fce8a7bb5b4b (PCI-Express Non-Transparent Bridge Support) Fixes: 282a2feeb9bf (NTB: Use DMA Engine to Transmit and Receive) Fixes: a754a8fcaf38 (NTB: allocate number transport entries depending on size of ring size) Fixes: d98ef99e378b (NTB: Clean up QP stats info) Fixes: e74bfeedad08 (NTB: Add flow control to the ntb_netdev) Fixes: 569410ca756c (NTB: Use unique DMA channels for TX and RX) Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13ntb_hw_switchtec: Fix ntb_mw_clear_trans error if size == 0Alexander Fomichev
ntb_mw_set_trans() should work as ntb_mw_clear_trans() when size == 0 and/or addr == 0. But error in xlate_pos checking condition prevents this. Fix the condition to make ntb_mw_clear_trans() working. Fixes: 87d11e645e31 (NTB: switchtec_ntb: Add memory window support) Signed-off-by: Alexander Fomichev <fomichev.ru@gmail.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13ntb_tool: Fix printk formatHelge Deller
The correct printk format is %pa or %pap, but not %pa[p]. Fixes: 7f46c8b3a5523 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13NTB: ntb_perf: Fix address err in perf_copy_chunkJiasen Lin
peer->outbuf is a virtual address which is get by ioremap, it can not be converted to a physical address by virt_to_page and page_to_phys. This conversion will result in DMA error, because the destination address which is converted by page_to_phys is invalid. This patch save the MMIO address of NTB BARx in perf_setup_peer_mw, and map the BAR space to DMA address after we assign the DMA channel. Then fill the destination address of DMA descriptor with this DMA address to guarantee that the address of memory write requests fall into memory window of NBT BARx with IOMMU enabled and disabled. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Jiasen Lin <linjiasen@hygon.cn> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13RDMA/mad: Do not crash if the rdma device does not have a umad interfaceJason Gunthorpe
Non-IB devices do not have a umad interface and the client_data will be left set to NULL. In this case calling get_nl_info() will try to kref a NULL cdev causing a crash: general protection fault, probably for non-canonical address 0xdffffc00000000ba: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000005d0-0x00000000000005d7] CPU: 0 PID: 20851 Comm: syz-executor.0 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:kobject_get+0x35/0x150 lib/kobject.c:640 Code: 53 e8 3f b0 8b f9 4d 85 e4 0f 84 a2 00 00 00 e8 31 b0 8b f9 49 8d 7c 24 3c 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f b6 04 02 48 89 fa +83 e2 07 38 d0 7f 08 84 c0 0f 85 eb 00 00 00 RSP: 0018:ffffc9000946f1a0 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: ffffffff85bdbbb0 RCX: ffffc9000bf22000 RDX: 00000000000000ba RSI: ffffffff87e9d78f RDI: 00000000000005d4 RBP: ffffc9000946f1b8 R08: ffff8880581a6440 R09: ffff8880581a6cd0 R10: fffffbfff154b838 R11: ffffffff8aa5c1c7 R12: 0000000000000598 R13: 0000000000000000 R14: ffffc9000946f278 R15: ffff88805cb0c4d0 FS: 00007faa9e8af700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30121000 CR3: 000000004515d000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: get_device+0x25/0x40 drivers/base/core.c:2574 __ib_get_client_nl_info+0x205/0x2e0 drivers/infiniband/core/device.c:1861 ib_get_client_nl_info+0x35/0x180 drivers/infiniband/core/device.c:1881 nldev_get_chardev+0x575/0xac0 drivers/infiniband/core/nldev.c:1621 rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:195 [inline] rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x5d9/0x980 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __do_sys_sendmsg net/socket.c:2439 [inline] __se_sys_sendmsg net/socket.c:2437 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cc: stable@kernel.org Fixes: 8f71bb0030b8 ("RDMA: Report available cdevs through RDMA_NLDEV_CMD_GET_CHARDEV") Link: https://lore.kernel.org/r/20200310075339.238090-1-leon@kernel.org Reported-by: syzbot+46fe08363dbba223dec5@syzkaller.appspotmail.com Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-13RDMA/core: Fix missing error check on dev_set_name()Jason Gunthorpe
If name memory allocation fails the name will be left empty and device_add_one() will crash: kobject: (0000000004952746): attempted to be registered with empty name! WARNING: CPU: 0 PID: 329 at lib/kobject.c:234 kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 329 Comm: syz-executor.5 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234 Code: 1a 98 ca f9 e9 f0 f8 ff ff 4c 89 f7 e8 6d 98 ca f9 e9 95 f9 ff ff e8 c3 f0 8b f9 4c 89 e6 48 c7 c7 a0 0e 1a 89 e8 e3 41 5c f9 <0f> 0b 41 bd ea ff ff ff e9 52 ff ff ff e8 a2 f0 8b f9 0f 0b e8 9b RSP: 0018:ffffc90005b27908 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff815eae46 RDI: fffff52000b64f13 RBP: ffffc90005b27960 R08: ffff88805aeba480 R09: ffffed1015d06659 R10: ffffed1015d06658 R11: ffff8880ae8332c7 R12: ffff8880a37fd000 R13: 0000000000000000 R14: ffff888096691780 R15: 0000000000000001 kobject_add_varg lib/kobject.c:390 [inline] kobject_add+0x150/0x1c0 lib/kobject.c:442 device_add+0x3be/0x1d00 drivers/base/core.c:2412 add_one_compat_dev drivers/infiniband/core/device.c:901 [inline] add_one_compat_dev+0x46a/0x7e0 drivers/infiniband/core/device.c:857 rdma_dev_init_net+0x2eb/0x490 drivers/infiniband/core/device.c:1120 ops_init+0xb3/0x420 net/core/net_namespace.c:137 setup_net+0x2d5/0x8b0 net/core/net_namespace.c:327 copy_net_ns+0x29e/0x5a0 net/core/net_namespace.c:468 create_new_namespaces+0x403/0xb50 kernel/nsproxy.c:108 unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:229 ksys_unshare+0x444/0x980 kernel/fork.c:2955 __do_sys_unshare kernel/fork.c:3023 [inline] __se_sys_unshare kernel/fork.c:3021 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:3021 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Link: https://lore.kernel.org/r/20200309193200.GA10633@ziepe.ca Cc: stable@kernel.org Fixes: 4e0f7b907072 ("RDMA/core: Implement compat device/sysfs tree in net namespace") Reported-by: syzbot+ab4dae63f7d310641ded@syzkaller.appspotmail.com Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-13iommu/vt-d: Fix debugfs register readsMegha Dey
Commit 6825d3ea6cde ("iommu/vt-d: Add debugfs support to show register contents") dumps the register contents for all IOMMU devices. Currently, a 64 bit read(dmar_readq) is done for all the IOMMU registers, even though some of the registers are 32 bits, which is incorrect. Use the correct read function variant (dmar_readl/dmar_readq) while reading the contents of 32/64 bit registers respectively. Signed-off-by: Megha Dey <megha.dey@linux.intel.com> Link: https://lore.kernel.org/r/1583784587-26126-2-git-send-email-megha.dey@linux.intel.com Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-13iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + ↵Hans de Goede
add_taint Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Fixes: 556ab45f9a77 ("ioat2: catch and recover from broken vtd configurations v6") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200309182510.373875-1-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=701847 Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-03-13iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn + add_taintHans de Goede
Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Some distros, e.g. Fedora, have tools watching for the kernel backtraces logged by the WARN macros and offer the user an option to file a bug for this when these are encountered. The WARN_TAINT in dmar_parse_one_rmrr + another iommu WARN_TAINT, addressed in another patch, have lead to over a 100 bugs being filed this way. This commit replaces the WARN_TAINT("...") call, with a pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) call avoiding the backtrace and thus also avoiding bug-reports being filed about this against the kernel. Fixes: f5a68bb0752e ("iommu/vt-d: Mark firmware tainted if RMRR fails sanity check") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Cc: Barret Rhoden <brho@google.com> Link: https://lore.kernel.org/r/20200309140138.3753-3-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1808874
2020-03-13iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taintHans de Goede
Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Some distros, e.g. Fedora, have tools watching for the kernel backtraces logged by the WARN macros and offer the user an option to file a bug for this when these are encountered. The WARN_TAINT in warn_invalid_dmar() + another iommu WARN_TAINT, addressed in another patch, have lead to over a 100 bugs being filed this way. This commit replaces the WARN_TAINT("...") calls, with pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) calls avoiding the backtrace and thus also avoiding bug-reports being filed about this against the kernel. Fixes: fd0c8894893c ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Fixes: e625b4a95d50 ("iommu/vt-d: Parse ANDD records") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200309140138.3753-2-hdegoede@redhat.com BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1564895
2020-03-13RDMA/nl: Do not permit empty devices names during RDMA_NLDEV_CMD_NEWLINK/SETJason Gunthorpe
Empty device names cannot be added to sysfs and crash with: kobject: (00000000f9de3792): attempted to be registered with empty name! WARNING: CPU: 1 PID: 10856 at lib/kobject.c:234 kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 10856 Comm: syz-executor459 Not tainted 5.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234 Code: 7a ca ca f9 e9 f0 f8 ff ff 4c 89 f7 e8 cd ca ca f9 e9 95 f9 ff ff e8 13 25 8c f9 4c 89 e6 48 c7 c7 a0 08 1a 89 e8 a3 76 5c f9 <0f> 0b 41 bd ea ff ff ff e9 52 ff ff ff e8 f2 24 8c f9 0f 0b e8 eb RSP: 0018:ffffc90002006eb0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815eae46 RDI: fffff52000400dc8 RBP: ffffc90002006f08 R08: ffff8880972ac500 R09: ffffed1015d26659 R10: ffffed1015d26658 R11: ffff8880ae9332c7 R12: ffff888093034668 R13: 0000000000000000 R14: ffff8880a69d7600 R15: 0000000000000001 kobject_add_varg lib/kobject.c:390 [inline] kobject_add+0x150/0x1c0 lib/kobject.c:442 device_add+0x3be/0x1d00 drivers/base/core.c:2412 ib_register_device drivers/infiniband/core/device.c:1371 [inline] ib_register_device+0x93e/0xe40 drivers/infiniband/core/device.c:1343 rxe_register_device+0x52e/0x655 drivers/infiniband/sw/rxe/rxe_verbs.c:1231 rxe_add+0x122b/0x1661 drivers/infiniband/sw/rxe/rxe.c:302 rxe_net_add+0x91/0xf0 drivers/infiniband/sw/rxe/rxe_net.c:539 rxe_newlink+0x39/0x90 drivers/infiniband/sw/rxe/rxe.c:318 nldev_newlink+0x28a/0x430 drivers/infiniband/core/nldev.c:1538 rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:195 [inline] rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x5d9/0x980 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __do_sys_sendmsg net/socket.c:2439 [inline] __se_sys_sendmsg net/socket.c:2437 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Prevent empty names when checking the name provided from userspace during newlink and rename. Fixes: 3856ec4b93c9 ("RDMA/core: Add RDMA_NLDEV_CMD_NEWLINK/DELLINK support") Fixes: 05d940d3a3ec ("RDMA/nldev: Allow IB device rename through RDMA netlink") Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200309191648.GA30852@ziepe.ca Reported-and-tested-by: syzbot+da615ac67d4dbea32cbc@syzkaller.appspotmail.com Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-13drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017Mario Kleiner
This fixes a problem found on the MacBookPro 2017 Retina panel: The panel reports 10 bpc color depth in its EDID, and the firmware chooses link settings at boot which support enough bandwidth for 10 bpc (324000 kbit/sec aka LINK_RATE_RBR2 aka 0xc), but the DP_MAX_LINK_RATE dpcd register only reports 2.7 Gbps (multiplier value 0xa) as possible, in direct contradiction of what the firmware successfully set up. This restricts the panel to 8 bpc, not providing the full color depth of the panel on Linux <= 5.5. Additionally, commit '4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' introduced into Linux 5.6-rc1 will unclamp panel depth to its full 10 bpc, thereby requiring a eDP bandwidth for all modes that exceeds the bandwidth available and causes all modes to fail validation -> No modes for the laptop panel -> failure to set any mode -> Panel goes dark. This patch adds a quirk specific to the MBP 2017 15" Retina panel to override reported max link rate to the correct maximum of 0xc = LINK_RATE_RBR2 to fix the darkness and reduced display precision. Please apply for Linux 5.6+ to avoid regressing Apple MBP panel support. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-13drm/amdgpu: add fbdev suspend/resume on gpu resetEvan Quan
This can fix the baco reset failure seen on Navi10. And this should be a low risk fix as the same sequence is already used for system suspend/resume. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-13drm/amd/amdgpu: Fix GPR read from debugfs (v2)Tom St Denis
The offset into the array was specified in bytes but should be in terms of 32-bit words. Also prevent large reads that would also cause a buffer overread. v2: Read from correct offset from internal storage buffer. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-03-13drm/amd/display: fix typos for dcn20_funcs and dcn21_funcs structStanley.Yang
In dcn20_funcs and dcn21_funcs struct, the member ".dsc_pg_control = NULL" should be removed due to .dsc_pg_control be assigned to dcn20_dsc_pg_control. Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-13powerpc/kasan: Fix shadow memory protection with CONFIG_KASAN_VMALLOCChristophe Leroy
With CONFIG_KASAN_VMALLOC, new page tables are created at the time shadow memory for vmalloc area is unmapped. If some parts of the page table still have entries to the zero page shadow memory, the entries are wrongly marked RW. With CONFIG_KASAN_VMALLOC, almost the entire kernel address space is managed by KASAN. To make it simple, just create KASAN page tables for the entire kernel space at kasan_init(). That doesn't use much more space, and that's anyway already done for hash platforms. Fixes: 3d4247fcc938 ("powerpc/32: Add support of KASAN_VMALLOC") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ef5248fc1f496c6b0dfdb59380f24968f25f75c5.1583513368.git.christophe.leroy@c-s.fr
2020-03-13MAINTAINERS: adjust to trusted keys subsystem creationLukas Bulwahn
Commit 47f9c2796891 ("KEYS: trusted: Create trusted keys subsystem") renamed trusted.h to trusted_tpm.h in include/keys/, and moved trusted.c to trusted-keys/trusted_tpm1.c in security/keys/. Since then, ./scripts/get_maintainer.pl --self-test complains: warning: no file matches F: security/keys/trusted.c warning: no file matches F: include/keys/trusted.h Rectify the KEYS-TRUSTED entry in MAINTAINERS now and ensure that all files in security/keys/trusted-keys/ are identified as part of KEYS-TRUSTED. Co-developed-by: Sebastian Duda <sebastian.duda@fau.de> Signed-off-by: Sebastian Duda <sebastian.duda@fau.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-03-13tpm: tpm_tis_spi_cr50: use new structure for SPI transfer delaysSergiu Cuciurean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-03-13tpm_tis_spi: use new 'delay' structure for SPI transfer delaysAlexandru Ardelean
In a recent change to the SPI subsystem [1], a new 'delay' struct was added to replace the 'delay_usecs'. This change replaces the current 'delay_usecs' with 'delay' for this driver. The 'spi_transfer_delay_exec()' function [in the SPI framework] makes sure that both 'delay_usecs' & 'delay' are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6485 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-03-13tpm: tpm2_bios_measurements_next should increase position indexVasily Averin
If .next function does not change position index, following .show function will repeat output related to current position index. For /sys/kernel/security/tpm0/binary_bios_measurements: 1) read after lseek beyound end of file generates whole last line. 2) read after lseek to middle of last line generates expected end of last line and unexpected whole last line once again. Cc: stable@vger.kernel.org # 4.19.x Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-03-13tpm: tpm1_bios_measurements_next should increase position indexVasily Averin
If .next function does not change position index, following .show function will repeat output related to current position index. In case of /sys/kernel/security/tpm0/ascii_bios_measurements and binary_bios_measurements: 1) read after lseek beyound end of file generates whole last line. 2) read after lseek to middle of last line generates expected end of last line and unexpected whole last line once again. Cc: stable@vger.kernel.org # 4.19.x Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-03-13tpm: Don't make log failures fatalMatthew Garrett
If a TPM is in disabled state, it's reasonable for it to have an empty log. Bailing out of probe in this case means that the PPI interface isn't available, so there's no way to then enable the TPM from the OS. In general it seems reasonable to ignore log errors - they shouldn't interfere with any other TPM functionality. Signed-off-by: Matthew Garrett <matthewgarrett@google.com> Cc: stable@vger.kernel.org # 4.19.x Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-03-13kconfig: make 'imply' obey the direct dependencyMasahiro Yamada
The 'imply' statement may create unmet direct dependency when the implied symbol depends on m. [Test Code] config FOO tristate "foo" imply BAZ config BAZ tristate "baz" depends on BAR config BAR def_tristate m config MODULES def_bool y option modules If you set FOO=y, BAZ is also promoted to y, which results in the following .config file: CONFIG_FOO=y CONFIG_BAZ=y CONFIG_BAR=m CONFIG_MODULES=y This does not meet the dependency 'BAZ depends on BAR'. Unlike 'select', what is worse, Kconfig never shows the 'WARNING: unmet direct dependencies detected for ...' for this case. Because 'imply' is considered to be weaker than 'depends on', Kconfig should take the direct dependency into account. For clarification, describe this case in kconfig-language.rst too. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-03-13kconfig: allow symbols implied by y to become mMasahiro Yamada
The 'imply' keyword restricts a symbol to y or n, excluding m when it is implied by y. This is the original behavior since commit 237e3ad0f195 ("Kconfig: Introduce the "imply" keyword"). However, the author of this feature, Nicolas Pitre, stated that the 'imply' keyword should not impose any restrictions. (https://lkml.org/lkml/2020/2/19/714) I agree, and want to get rid of this tricky behavior. Suggested-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Nicolas Pitre <nico@fluxnic.net>
2020-03-12Merge tag 'drm-fixes-2020-03-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "It's a bit quieter, probably not as much as it could be. There is on large regression fix in here from Lyude for displayport bandwidth calculations, there've been reports of multi-monitor in docks not working since -rc1 and this has been tested to fix those. Otherwise it's a bunch of i915 (with some GVT fixes), a set of amdgpu watermark + bios fixes, and an exynos iommu cleanup fix. core: - DP MST bandwidth regression fix. i915: - hard lockup fix - GVT fixes - 32-bit alignment issue fix - timeline wait fixes - cacheline_retire and free amdgpu: - Update the display watermark bounding box for navi14 - Fix fetching vbios directly from rom on vega20/arcturus - Navi and renoir watermark fixes exynos: - iommu object cleanup fix" ` * tag 'drm-fixes-2020-03-13' of git://anongit.freedesktop.org/drm/drm: drm/dp_mst: Rewrite and fix bandwidth limit checks drm/dp_mst: Reprobe path resources in CSN handler drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks drm/dp_mst: Rename drm_dp_mst_is_dp_mst_end_device() to be less redundant drm/i915: Defer semaphore priority bumping to a workqueue drm/i915/gt: Close race between cacheline_retire and free drm/i915/execlists: Enable timeslice on partial virtual engine dequeue drm/i915: be more solid in checking the alignment drm/i915/gvt: Fix dma-buf display blur issue on CFL drm/i915: Return early for await_start on same timeline drm/i915: Actually emit the await_start drm/amdgpu/powerplay: nv1x, renior copy dcn clock settings of watermark to smu during boot up drm/exynos: Fix cleanup of IOMMU related objects drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20 drm/amd/display: update soc bb for nv14 drm/i915/gvt: Fix emulated vbt size issue drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exits
2020-03-13net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()Masahiro Yamada
In net/Kconfig, NET_DEVLINK implies NET_DROP_MONITOR. The original behavior of the 'imply' keyword prevents NET_DROP_MONITOR from being 'm' when NET_DEVLINK=y. With the planned Kconfig change that relaxes the 'imply', the combination of NET_DEVLINK=y and NET_DROP_MONITOR=m would be allowed. Use IS_REACHABLE() to avoid the vmlinux link error for this case. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2020-03-13modpost: return error if module is missing ns imports and ↵Jessica Yu
MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n Currently when CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n, modpost only warns when a module is missing namespace imports. Under this configuration, such a module cannot be loaded into the kernel anyway, as the module loader would reject it. We might as well return a build error when a module is missing namespace imports under CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n, so that the build warning does not go ignored/unnoticed. Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-13modpost: rework and consolidate logging interfaceJessica Yu
Rework modpost's logging interface by consolidating merror(), warn(), and fatal() to use a single function, modpost_log(). Introduce different logging levels (WARN, ERROR, FATAL) as well. The purpose of this cleanup is to reduce code duplication when deciding whether or not to warn or error out based on a condition. Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-13kbuild: allow to run dt_binding_check without kernel configurationMasahiro Yamada
The dt_binding_check target is located outside of the 'ifneq ($(dtstree),) ... endif' block. So, you can run 'make dt_binding_check' on any architecture. This makes a perfect sense because the dt-schema is arch-agnostic. The only one problem I see is that scripts/dtc/dtc is not always built. For example, ARCH=x86 defconfig does not define CONFIG_DTC. Kbuild descends into scripts/dtc/ with doing nothing. Then, it fails to build *.example.dt.yaml files. Let's build scripts/dtc/dtc forcibly when running dt_binding_check. The dt-schema does not depend on any CONFIG option either, so you should be able to run dt_binding_check without the .config file. Going forward, you can directly run 'make dt_binding_check' in a pristine source tree. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org>
2020-03-13kbuild: allow to run dt_binding_check and dtbs_check in a single commandMasahiro Yamada
Since commit 93512dad334d ("dt-bindings: Improve validation build error handling"), 'make dtbs_check' does not validate the schema fully. If you want to check everything, you need to run two commands separately. $ make ARCH=arm dt_binding_check $ make ARCH=arm dtbs_check They are exclusive each other, so you cannot do like this: $ make ARCH=arm dt_binding_check dtbs_check In this case, dt-doc-validate and dt-extract-example are skipped because CHECK_DTBS is set. Let's make it possible to run these two targets in a single command. It will be useful for schema writers. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org>
2020-03-13kbuild: avoid concurrency issue in parallel building dtbs and dtbs_checkMasahiro Yamada
'make dtbs_check' checks the shecma in addition to building *.dtb files, in other words, 'make dtbs_check' is a super-set of 'make dtbs'. So, you do not have to do 'make dtbs dtbs_check', but I want to keep the build system as robust as possible in any use. Currently, 'dtbs' and 'dtbs_check' are independent of each other. In parallel building, two threads descend into arch/*/boot/dts/, one for dtbs and the other for dtbs_check, then end up with building the same DTB simultaneously. This commit fixes the concurrency issue. Otherwise, I see build errors like follows: $ make ARCH=arm64 defconfig $ make -j16 ARCH=arm64 DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/psci.yaml dtbs dtbs_check <snip> DTC arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dtb DTC arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtb DTC arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb DTC arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb DTC arch/arm64/boot/dts/freescale/imx8mn-evk.dtb DTC arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb DTC arch/arm64/boot/dts/zte/zx296718-pcbox.dtb DTC arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dt.yaml DTC arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dtb DTC arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dtb DTC arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dtb DTC arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-inx.dtb DTC arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb CHECK arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dt.yaml fixdep: error opening file: arch/arm64/boot/dts/allwinner/.sun50i-h6-orangepi-lite2.dtb.d: No such file or directory make[2]: *** [scripts/Makefile.lib:296: arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb] Error 2 make[2]: *** Deleting file 'arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dtb' make[2]: *** Waiting for unfinished jobs.... DTC arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-kd.dtb DTC arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dtb DTC arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dtb DTC arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dtb fixdep: parse error; no targets found make[2]: *** [scripts/Makefile.lib:296: arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb] Error 1 make[2]: *** Deleting file 'arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dtb' make[1]: *** [scripts/Makefile.build:505: arch/arm64/boot/dts/allwinner] Error 2 make[1]: *** Waiting for unfinished jobs.... DTC arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org>
2020-03-13kbuild: doc: fix references to other documentsMasahiro Yamada
All the files in Documentation/kbuild/ were converted to reST. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-12null_blk: describe the usage of fault injection paramDongli Zhang
As null_blk is a very good start point to test block layer, this patch adds description and comments to 'timeout', 'requeue' and 'init_hctx' to explain how to use fault injection with null_blk. The nvme has similar with nvme_core.fail_request in the form of comment. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12NTB: Fix an error in get link statusJiasen Lin
The offset of PCIe Capability Header for AMD and HYGON NTB is 0x64, but the macro which named "AMD_LINK_STATUS_OFFSET" is defined as 0x68. It is offset of Device Capabilities Reg rather than Link Control Reg. This code trigger an error in get link statsus: cat /sys/kernel/debug/ntb_hw_amd/0000:43:00.1/info LNK STA - 0x8fa1 Link Status - Up Link Speed - PCI-E Gen 0 Link Width - x0 This patch use pcie_capability_read_dword to get link status. After fix this issue, we can get link status accurately: cat /sys/kernel/debug/ntb_hw_amd/0000:43:00.1/info LNK STA - 0x11030042 Link Status - Up Link Speed - PCI-E Gen 3 Link Width - x16 Fixes: a1b3695820aa4 ("NTB: Add support for AMD PCI-Express Non-Transparent Bridge") Signed-off-by: Jiasen Lin <linjiasen@hygon.cn> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2020-03-13Merge tag 'topic/mst-bw-check-fixes-for-airlied-2020-03-12-2' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes UAPI Changes: None Cross-subsystem Changes: None Core Changes: Fixed regressions introduced by commit cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check"), which would cause us to: * Calculate the available bandwidth on an MST topology incorrectly, and as a result reject most display configurations that would try to enable more then one sink on a topology * Occasionally expose MST connectors to userspace before finishing probing their PBN capabilities, resulting in us rejecting display configurations because we assumed briefly that no bandwidth was available Driver Changes: None Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/bf16ee577567beed91c86b7d9cda3ec2e8c50a71.camel@redhat.com
2020-03-13Merge tag 'drm-intel-fixes-2020-03-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc6: - hard lockup fix - GVT fixes - 32-bit alignment issue fix - timeline wait fixes - cacheline_retire and free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87lfo6ksvw.fsf@intel.com
2020-03-13Merge tag 'amd-drm-fixes-5.6-2020-03-11' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-03-11: amdgpu: - Update the display watermark bounding box for navi14 - Fix fetching vbios directly from rom on vega20/arcturus - Navi and renoir watermark fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200312020924.4161-1-alexander.deucher@amd.com
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "It looks like a decent sized set of fixes, but a lot of these are one liner off-by-one and similar type changes: 1) Fix netlink header pointer to calcular bad attribute offset reported to user. From Pablo Neira Ayuso. 2) Don't double clear PHY interrupts when ->did_interrupt is set, from Heiner Kallweit. 3) Add missing validation of various (devlink, nl802154, fib, etc.) attributes, from Jakub Kicinski. 4) Missing *pos increments in various netfilter seq_next ops, from Vasily Averin. 5) Missing break in of_mdiobus_register() loop, from Dajun Jin. 6) Don't double bump tx_dropped in veth driver, from Jiang Lidong. 7) Work around FMAN erratum A050385, from Madalin Bucur. 8) Make sure ARP header is pulled early enough in bonding driver, from Eric Dumazet. 9) Do a cond_resched() during multicast processing of ipvlan and macvlan, from Mahesh Bandewar. 10) Don't attach cgroups to unrelated sockets when in interrupt context, from Shakeel Butt. 11) Fix tpacket ring state management when encountering unknown GSO types. From Willem de Bruijn. 12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend() only in the suspend context. From Heiner Kallweit" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) net: systemport: fix index check to avoid an array out of bounds access tc-testing: add ETS scheduler to tdc build configuration net: phy: fix MDIO bus PM PHY resuming net: hns3: clear port base VLAN when unload PF net: hns3: fix RMW issue for VLAN filter switch net: hns3: fix VF VLAN table entries inconsistent issue net: hns3: fix "tc qdisc del" failed issue taprio: Fix sending packets without dequeueing them net: mvmdio: avoid error message for optional IRQ net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register net: memcg: fix lockdep splat in inet_csk_accept() s390/qeth: implement smarter resizing of the RX buffer pool s390/qeth: refactor buffer pool code s390/qeth: use page pointers to manage RX buffer pool seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed net/packet: tpacket_rcv: do not increment ring index on drop sxgbe: Fix off by one in samsung driver strncpy size arg net: caif: Add lockdep expression to RCU traversal primitive MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer ...
2020-03-12drm/dp_mst: Rewrite and fix bandwidth limit checksLyude Paul
Sigh, this is mostly my fault for not giving commit cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") enough scrutiny during review. The way we're checking bandwidth limitations here is mostly wrong: For starters, drm_dp_mst_atomic_check_bw_limit() determines the pbn_limit of a branch by simply scanning each port on the current branch device, then uses the last non-zero full_pbn value that it finds. It then counts the sum of the PBN used on each branch device for that level, and compares against the full_pbn value it found before. This is wrong because ports can and will have different PBN limitations on many hubs, especially since a number of DisplayPort hubs out there will be clever and only use the smallest link rate required for each downstream sink - potentially giving every port a different full_pbn value depending on what link rate it's trained at. This means with our current code, which max PBN value we end up with is not well defined. Additionally, we also need to remember when checking bandwidth limitations that the top-most device in any MST topology is a branch device, not a port. This means that the first level of a topology doesn't technically have a full_pbn value that needs to be checked. Instead, we should assume that so long as our VCPI allocations fit we're within the bandwidth limitations of the primary MSTB. We do however, want to check full_pbn on every port including those of the primary MSTB. However, it's important to keep in mind that this value represents the minimum link rate /between a port's sink or mstb, and the mstb itself/. A quick diagram to explain: MSTB #1 / \ / \ Port #1 Port #2 full_pbn for Port #1 → | | ← full_pbn for Port #2 Sink #1 MSTB #2 | etc... Note that in the above diagram, the combined PBN from all VCPI allocations on said hub should not exceed the full_pbn value of port #2, and the display configuration on sink #1 should not exceed the full_pbn value of port #1. However, port #1 and port #2 can otherwise consume as much bandwidth as they want so long as their VCPI allocations still fit. And finally - our current bandwidth checking code also makes the mistake of not checking whether something is an end device or not before trying to traverse down it. So, let's fix it by rewriting our bandwidth checking helpers. We split the function into one part for handling branches which simply adds up the total PBN on each branch and returns it, and one for checking each port to ensure we're not going over its PBN limit. Phew. This should fix regressions seen, where we erroneously reject display configurations due to thinking they're going over our bandwidth limits when they're not. Changes since v1: * Took an even closer look at how PBN limitations are supposed to be handled, and did some experimenting with Sean Paul. Ended up rewriting these helpers again, but this time they should actually be correct! Changes since v2: * Small indenting fix * Fix pbn_used check in drm_dp_mst_atomic_check_port_bw_limit() Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") Cc: Sean Paul <seanpaul@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200309210131.1497545-1-lyude@redhat.com
2020-03-12drm/dp_mst: Reprobe path resources in CSN handlerLyude Paul
We used to punt off reprobing path resources to the link address probe work, but now that we handle CSNs asynchronously from the driver's HPD handling we can do whatever the heck we want from the CSN! So, reprobe the path resources from drm_dp_mst_handle_conn_stat(). Also, get rid of the path resource reprobing code in drm_dp_check_and_send_link_address() since it's needlessly complicated when we already reprobe path resources from drm_dp_handle_link_address_port(). And finally, teach drm_dp_send_enum_path_resources() to return 1 on PBN changes so we know if we need to send another hotplug or not. This fixes issues where we've indicated to userspace that a port has just been connected, before we actually probed it's available PBN - something that results in unexpected atomic check failures. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-4-lyude@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
2020-03-12drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checksLyude Paul
DisplayPort specifications are fun. For a while, it's been really unclear to us what available_pbn actually does. There's a somewhat vague explanation in the DisplayPort spec (starting from 1.2) that partially explains it: The minimum payload bandwidth number supported by the path. Each node updates this number with its available payload bandwidth number if its payload bandwidth number is less than that in the Message Transaction reply. So, it sounds like available_pbn represents the smallest link rate in use between the source and the branch device. Cool, so full_pbn is just the highest possible PBN that the branch device supports right? Well, we assumed that for quite a while until Sean Paul noticed that on some MST hubs, available_pbn will actually get set to 0 whenever there's any active payloads on the respective branch device. This caused quite a bit of confusion since clearing the payload ID table would end up fixing the available_pbn value. So, we just went with that until commit cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") started breaking people's setups due to us getting erroneous available_pbn values. So, we did some more digging and got confused until we finally looked at the definition for full_pbn: The bandwidth of the link at the trained link rate and lane count between the DP Source device and the DP Sink device with no time slots allocated to VC Payloads, represented as a Payload Bandwidth Number. As with the Available_Payload_Bandwidth_Number, this number is determined by the link with the lowest lane count and link rate. That's what we get for not reading specs closely enough, hehe. So, since full_pbn is definitely what we want for doing bandwidth restriction checks - let's start using that instead and ignore available_pbn entirely. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check") Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Sean Paul <sean@poorly.run> Reviewed-by: Mikita Lipski <mikita.lipski@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-3-lyude@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
2020-03-12drm/dp_mst: Rename drm_dp_mst_is_dp_mst_end_device() to be less redundantLyude Paul
It's already prefixed by dp_mst, so we don't really need to repeat ourselves here. One of the changes I should have picked up originally when reviewing MST DSC support. There should be no functional changes here Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Sean Paul <seanpaul@google.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306234623.547525-2-lyude@redhat.com
2020-03-12Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs fixes from Al Viro: "A couple of fixes for old crap in ->atomic_open() instances" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: cifs_atomic_open(): fix double-put on late allocation failure gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache
2020-03-12net: systemport: fix index check to avoid an array out of bounds accessColin Ian King
Currently the bounds check on index is off by one and can lead to an out of bounds access on array priv->filters_loc when index is RXCHK_BRCM_TAG_MAX. Fixes: bb9051a2b230 ("net: systemport: Add support for WAKE_FILTER") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12tc-testing: add ETS scheduler to tdc build configurationDavide Caratti
add CONFIG_NET_SCH_ETS to 'config', otherwise test suites using this file to perform a full tdc run will encounter the following warning: ok 645 e90e - Add ETS qdisc using bands # skipped - "-----> teardown stage" did not complete successfully Fixes: 82c664b69c8b ("selftests: qdiscs: Add test coverage for ETS Qdisc") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: phy: fix MDIO bus PM PHY resumingHeiner Kallweit
So far we have the unfortunate situation that mdio_bus_phy_may_suspend() is called in suspend AND resume path, assuming that function result is the same. After the original change this is no longer the case, resulting in broken resume as reported by Geert. To fix this call mdio_bus_phy_may_suspend() in the suspend path only, and let the phy_device store the info whether it was suspended by MDIO bus PM. Fixes: 503ba7c69610 ("net: phy: Avoid multiple suspends") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12cifs_atomic_open(): fix double-put on late allocation failureAl Viro
several iterations of ->atomic_open() calling conventions ago, we used to need fput() if ->atomic_open() failed at some point after successful finish_open(). Now (since 2016) it's not needed - struct file carries enough state to make fput() work regardless of the point in struct file lifecycle and discarding it on failure exits in open() got unified. Unfortunately, I'd missed the fact that we had an instance of ->atomic_open() (cifs one) that used to need that fput(), as well as the stale comment in finish_open() demanding such late failure handling. Trivially fixed... Fixes: fe9ec8291fca "do_last(): take fput() on error after opening to out:" Cc: stable@kernel.org # v4.7+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-12gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcacheAl Viro
with the way fs/namei.c:do_last() had been done, ->atomic_open() instances needed to recognize the case when existing file got found with O_EXCL|O_CREAT, either by falling back to finish_no_open() or failing themselves. gfs2 one didn't. Fixes: 6d4ade986f9c (GFS2: Add atomic_open support) Cc: stable@kernel.org # v3.11 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-23 11:05:35 +0000