Age | Commit message (Collapse) | Author |
|
When a scheduling entity is placed onto cfs_rq, its vruntime is pulled
to the base level (around cfs_rq->min_vruntime), so that the entity
doesn't gain extra boost when placed backwards.
However, if the entity being placed wasn't executed for a long time, its
vruntime may get too far behind (e.g. while cfs_rq was executing a
low-weight hog), which can inverse the vruntime comparison due to s64
overflow. This results in the entity being placed with its original
vruntime way forwards, so that it will effectively never get to the cpu.
To prevent that, ignore the vruntime of the entity being placed if it
didn't execute for much longer than the characteristic sheduler time
scale.
[rkagan: formatted, adjusted commit log, comments, cutoff value]
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Co-developed-by: Roman Kagan <rkagan@amazon.de>
Signed-off-by: Roman Kagan <rkagan@amazon.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230130122216.3555094-1-rkagan@amazon.de
|
|
Remove the capacity inversion detection which is now handled by
util_fits_cpu() returning -1 when we need to continue to look for a
potential CPU with better performance.
This ends up almost reverting patches below except for some comments:
commit da07d2f9c153 ("sched/fair: Fixes for capacity inversion detection")
commit aa69c36f31aa ("sched/fair: Consider capacity inversion in util_fits_cpu()")
commit 44c7b80bffc3 ("sched/fair: Detect capacity inversion")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230201143628.270912-3-vincent.guittot@linaro.org
|
|
By taking into account uclamp_min, the 1:1 relation between task misfit
and cpu overutilized is no more true as a task with a small util_avg may
not fit a high capacity cpu because of uclamp_min constraint.
Add a new state in util_fits_cpu() to reflect the case that task would fit
a CPU except for the uclamp_min hint which is a performance requirement.
Use -1 to reflect that a CPU doesn't fit only because of uclamp_min so we
can use this new value to take additional action to select the best CPU
that doesn't match uclamp_min hint.
When util_fits_cpu() returns -1, we will continue to look for a possible
CPU with better performance, which replaces Capacity Inversion detection
with capacity_orig_of() - thermal_load_avg to detect a capacity inversion.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-and-tested-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Link: https://lore.kernel.org/r/20230201143628.270912-2-vincent.guittot@linaro.org
|
|
For mysterious raisins I listed the new __asan_mem*() functions as
being uaccess safe, this is giving objtool fails on KASAN builds
because these functions call out to the actual __mem*() functions
which are not marked uaccess safe.
Removing it doesn't make the robots unhappy.
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Bisected-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230126182302.GA687063@paulmck-ThinkPad-P17-Gen-1
|
|
Do the feature check as the very first thing in the function. Everything
else comes after that and is meaningless work if the TSC CPUID bit is
not even set. Switch to cpu_feature_enabled() too, while at it.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/Y5990CUCuWd5jfBH@zn.tnic
|
|
A quick search doesn't reveal any use outside of the kernel - which
would be questionable to begin with anyway - so make the export GPL
only.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/Y599miBzWRAuOwhg@zn.tnic
|
|
15cd8812ab2c ("x86: Remove the CPU cache size printk's") removed the
last use of the trace local var. Remove it too and the useless trace
cache case.
No functional changes.
Reported-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230210234541.9694-1-bp@alien8.de
Link: http://lore.kernel.org/r/20220705073349.1512-1-jiapeng.chong@linux.alibaba.com
|
|
Commit f2bd1c5ae2cb ("ALSA: hda: Fix page fault in
snd_hda_codec_shutdown()") relocated initialization of several codec
device fields. Due to differences between codec_exec_verb() and
snd_hdac_bus_exec_bus() in how they handle VERB execution - the latter
does not touch PM - assigning ->exec_verb to codec_exec_verb() causes PM
to be engaged before it is configured for the device. Configuration of
PM for the ASoC HDAudio sound card is done with snd_hda_set_power_save()
during skl_hda_audio_probe() whereas the assignment happens early, in
snd_hda_codec_device_init().
Revert to previous behavior to avoid problems caused by too early PM
manipulation.
Suggested-by: Jason Montleon <jmontleo@redhat.com>
Link: https://lore.kernel.org/regressions/CALFERdzKUodLsm6=Ub3g2+PxpNpPtPq3bGBLbff=eZr9_S=YVA@mail.gmail.com
Fixes: f2bd1c5ae2cb ("ALSA: hda: Fix page fault in snd_hda_codec_shutdown()")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230210165541.3543604-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Kuniyuki Iwashima says:
====================
sk->sk_forward_alloc fixes.
The first patch fixes a negative sk_forward_alloc by adding
sk_rmem_schedule() before skb_set_owner_r(), and second patch
removes an unnecessary WARN_ON_ONCE().
v2: https://lore.kernel.org/netdev/20230209013329.87879-1-kuniyu@amazon.com/
v1: https://lore.kernel.org/netdev/20230207183718.54520-1-kuniyu@amazon.com/
====================
Link: https://lore.kernel.org/r/20230210002202.81442-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Christoph Paasch reported that commit b5fc29233d28 ("inet6: Remove
inet6_destroy_sock() in sk->sk_prot->destroy().") started triggering
WARN_ON_ONCE(sk->sk_forward_alloc) in sk_stream_kill_queues(). [0 - 2]
Also, we can reproduce it by a program in [3].
In the commit, we delay freeing ipv6_pinfo.pktoptions from sk->destroy()
to sk->sk_destruct(), so sk->sk_forward_alloc is no longer zero in
inet_csk_destroy_sock().
The same check has been in inet_sock_destruct() from at least v2.6,
we can just remove the WARN_ON_ONCE(). However, among the users of
sk_stream_kill_queues(), only CAIF is not calling inet_sock_destruct().
Thus, we add the same WARN_ON_ONCE() to caif_sock_destructor().
[0]: https://lore.kernel.org/netdev/39725AB4-88F1-41B3-B07F-949C5CAEFF4F@icloud.com/
[1]: https://github.com/multipath-tcp/mptcp_net-next/issues/341
[2]:
WARNING: CPU: 0 PID: 3232 at net/core/stream.c:212 sk_stream_kill_queues+0x2f9/0x3e0
Modules linked in:
CPU: 0 PID: 3232 Comm: syz-executor.0 Not tainted 6.2.0-rc5ab24eb4698afbe147b424149c529e2a43ec24eb5 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:sk_stream_kill_queues+0x2f9/0x3e0
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ec 00 00 00 8b ab 08 01 00 00 e9 60 ff ff ff e8 d0 5f b6 fe 0f 0b eb 97 e8 c7 5f b6 fe <0f> 0b eb a0 e8 be 5f b6 fe 0f 0b e9 6a fe ff ff e8 02 07 e3 fe e9
RSP: 0018:ffff88810570fc68 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888101f38f40 RSI: ffffffff8285e529 RDI: 0000000000000005
RBP: 0000000000000ce0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000ce0 R11: 0000000000000001 R12: ffff8881009e9488
R13: ffffffff84af2cc0 R14: 0000000000000000 R15: ffff8881009e9458
FS: 00007f7fdfbd5800(0000) GS:ffff88811b600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32923000 CR3: 00000001062fc006 CR4: 0000000000170ef0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x1a1/0x320
__tcp_close+0xab6/0xe90
tcp_close+0x30/0xc0
inet_release+0xe9/0x1f0
inet6_release+0x4c/0x70
__sock_release+0xd2/0x280
sock_close+0x15/0x20
__fput+0x252/0xa20
task_work_run+0x169/0x250
exit_to_user_mode_prepare+0x113/0x120
syscall_exit_to_user_mode+0x1d/0x40
do_syscall_64+0x48/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f7fdf7ae28d
Code: c1 20 00 00 75 10 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee fb ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 37 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01
RSP: 002b:00000000007dfbb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7fdf7ae28d
RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 0000000000000003
RBP: 0000000000000000 R08: 000000007f338e0f R09: 0000000000000e0f
R10: 000000007f338e13 R11: 0000000000000293 R12: 00007f7fdefff000
R13: 00007f7fdefffcd8 R14: 00007f7fdefffce0 R15: 00007f7fdefffcd8
</TASK>
[3]: https://lore.kernel.org/netdev/20230208004245.83497-1-kuniyu@amazon.com/
Fixes: b5fc29233d28 ("inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Christoph Paasch <christophpaasch@icloud.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet pointed out [0] that when we call skb_set_owner_r()
for ipv6_pinfo.pktoptions, sk_rmem_schedule() has not been called,
resulting in a negative sk_forward_alloc.
We add a new helper which clones a skb and sets its owner only
when sk_rmem_schedule() succeeds.
Note that we move skb_set_owner_r() forward in (dccp|tcp)_v6_do_rcv()
because tcp_send_synack() can make sk_forward_alloc negative before
ipv6_opt_accepted() in the crossed SYN-ACK or self-connect() cases.
[0]: https://lore.kernel.org/netdev/CANn89iK9oc20Jdi_41jb9URdF210r7d1Y-+uypbMSbOfY6jqrg@mail.gmail.com/
Fixes: 323fbd0edf3f ("net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()")
Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The result of nlmsg_find_attr() 'br_spec' is dereferenced in
nla_for_each_nested(), but it can take NULL value in nla_find() function,
which will result in an error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 51616018dd1b ("i40e: Add support for getlink, setlink ndo ops")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230209172833.3596034-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Incrementation of xsk_frames inside the for-loop produces
infinite loop, if we have both normal AF_XDP-TX and XDP_TXed
buffers to complete.
Split xsk_frames into 2 variables (xsk_frames and completed_frames)
to eliminate this bug.
Fixes: 29322791bc8b ("ice: xsk: change batched Tx descriptor cleaning")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230209160130.1779890-1-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The imperfect hash area can be updated while packets are traversing,
which will cause a use-after-free when 'tcf_exts_exec()' is called
with the destroyed tcf_ext.
CPU 0: CPU 1:
tcindex_set_parms tcindex_classify
tcindex_lookup
tcindex_lookup
tcf_exts_change
tcf_exts_exec [UAF]
Stop operating on the shared area directly, by using a local copy,
and update the filter with 'rcu_replace_pointer()'. Delete the old
filter version only after a rcu grace period elapsed.
Fixes: 9b0d4446b569 ("net: sched: avoid atomic swap in tcf_exts_change")
Reported-by: valis <sec@valis.email>
Suggested-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230209143739.279867-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use list_is_first() to check whether tsp->asoc matches the first
element of ep->asocs, as the list is not guaranteed to have an entry.
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230208-sctp-filter-v2-1-6e1f4017f326@diag.uniroma1.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In TI's AM62x/AM64x SoCs, successful teardown of RX DMA Channel raises an
interrupt. The process of servicing this interrupt involves flushing all
pending RX DMA descriptors and clearing the teardown completion marker
(TDCM). The am65_cpsw_nuss_rx_packets() function invoked from the RX
NAPI callback services the interrupt. Thus, it is necessary to wait for
this handler to run, drain all packets and clear TDCM, before calling
napi_disable() in am65_cpsw_nuss_common_stop() function post channel
teardown. If napi_disable() executes before ensuring that TDCM is
cleared, the TDCM remains set when the interfaces are down, resulting in
an interrupt storm when the interfaces are brought up again.
Since the interrupt raised to indicate the RX DMA Channel teardown is
specific to the AM62x and AM64x SoCs, add a quirk for it.
Fixes: 4f7cce272403 ("net: ethernet: ti: am65-cpsw: add support for am64x cpsw3g")
Co-developed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230209084432.189222-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two clk driver fixes
- Use devm_kasprintf() to avoid overflows when forming clk names in
the Microchip PolarFire driver
- Fix the pretty broken Ingenic JZ4760 M/N/OD calculation to actually
work and find proper divisors"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ingenic: jz4760: Update M/N/OD calculation algorithm
clk: microchip: mpfs-ccc: Use devm_kasprintf() for allocating formatted strings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some assorted pin control fixes, the most interesting will be the
Intel patch fixing a classic problem: laptop touchpad IRQs...
- Some pin drive register fixes in the Mediatek driver.
- Return proper error code in the Aspeed driver, and revert and
ill-advised force-disablement patch that needs to be reworked.
- Fix AMD driver debug output.
- Fix potential NULL dereference in the Single driver.
- Fix a group definition error in the Qualcomm SM8450 LPASS driver.
- Restore pins used in direct IRQ mode in the Intel driver (This
fixes some laptop touchpads!)"
* tag 'pinctrl-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: intel: Restore the pins that used to be in Direct IRQ mode
pinctrl: qcom: sm8450-lpass-lpi: correct swr_rx_data group
pinctrl: aspeed: Revert "Force to disable the function's signal"
pinctrl: single: fix potential NULL dereference
pinctrl: amd: Fix debug output for debounce time
pinctrl: aspeed: Fix confusing types in return value
pinctrl: mediatek: Fix the drive register definition of some Pins
|
|
fadvise and madvise both provide hints for caching or access pattern for
file and memory respectively. Skip them.
Fixes: 5bd2182d58e9 ("audit,io_uring,io-wq: add some basic audit support to io_uring")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Link: https://lore.kernel.org/r/b5dfdcd541115c86dbc774aa9dd502c964849c5f.1675282642.git.rgb@redhat.com
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Move to a shared PCI git tree (Bjorn Helgaas)
- Add Krzysztof Wilczyński as another PCI maintainer (Lorenzo
Pieralisi)
- Revert a couple ASPM patches to fix suspend/resume regressions (Bjorn
Helgaas)
* tag 'pci-v6.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI/ASPM: Refactor L1 PM Substates Control Register programming"
Revert "PCI/ASPM: Save L1 PM Substates Capability for suspend/resume"
MAINTAINERS: Promote Krzysztof to PCI controller maintainer
MAINTAINERS: Move to shared PCI tree
|
|
This reverts commit 5e85eba6f50dc288c22083a7e213152bcc4b8208.
Thomas Witt reported that 5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates
Control Register programming") broke suspend/resume on a Tuxedo
Infinitybook S 14 v5, which seems to use a Clevo L140CU Mainboard.
The main symptom is:
iwlwifi 0000:02:00.0: Unable to change power state from D3hot to D0, device inaccessible
nvme 0000:03:00.0: Unable to change power state from D3hot to D0, device inaccessible
and the machine is only partially usable after resume. It can't run dmesg
and can't do a clean reboot. This happens on every suspend/resume cycle.
Revert 5e85eba6f50d until we can figure out the root cause.
Fixes: 5e85eba6f50d ("PCI/ASPM: Refactor L1 PM Substates Control Register programming")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>
|
|
This reverts commit 4ff116d0d5fd8a025604b0802d93a2d5f4e465d1.
Tasev Nikola and Mark Enriquez reported that resume from suspend was broken
in v6.1-rc1. Tasev bisected to a47126ec29f5 ("PCI/PTM: Cache PTM
Capability offset"), but we can't figure out how that could be related.
Mark saw the same symptoms and bisected to 4ff116d0d5fd ("PCI/ASPM: Save L1
PM Substates Capability for suspend/resume"), which does have a connection:
it restores L1 Substates configuration while ASPM L1 may be enabled:
pci_restore_state
pci_restore_aspm_l1ss_state
aspm_program_l1ss
pci_write_config_dword(PCI_L1SS_CTL1, ctl1) # L1SS restore
pci_restore_pcie_state
pcie_capability_write_word(PCI_EXP_LNKCTL, cap[i++]) # L1 restore
which is a problem because PCIe r6.0, sec 5.5.4, requires that:
If setting either or both of the enable bits for ASPM L1 PM
Substates, both ports must be configured as described in this
section while ASPM L1 is disabled.
Separately, Thomas Witt reported that 5e85eba6f50d ("PCI/ASPM: Refactor L1
PM Substates Control Register programming") broke suspend/resume, and it
depends on 4ff116d0d5fd.
Revert 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume") to fix the resume issue and enable revert of 5e85eba6f50d
to fix the issue Thomas reported.
Note that reverting 4ff116d0d5fd means L1 Substates config may be lost on
suspend/resume. As far as we know the system will use more power but will
still *work* correctly.
Fixes: 4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Reported-by: Tasev Nikola <tasev.stefanoska@skynet.be>
Reported-by: Mark Enriquez <enriquezmark36@gmail.com>
Reported-by: Thomas Witt <kernel@witt.link>
Tested-by: Mark Enriquez <enriquezmark36@gmail.com>
Tested-by: Thomas Witt <kernel@witt.link>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v6.1+
Cc: Vidya Sagar <vidyas@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"All the changes this time are minor devicetree corrections, the
majority being for 64-bit Rockchip SoC support. These are a couple of
corrections for properties that are in violation of the binding, some
that put the machine into safer operating points for the eMMC and
thermal settings, and missing properties that prevented rk356x PCIe
and ethernet from working correctly.
The changes for amlogic and mediatek address incorrect properties that
were preventing the display support on MT8195 and the MMC support on
various Meson SoCs from working correctly.
The stihxxx-b2120 change fixes the GPIO polarity for the DVB tuner to
allow this to be used correctly after a futre driver change, though it
has no effect on older kernels"
* tag 'soc-fixes-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-g12-common: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitive
ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port
arm64: dts: mediatek: mt8195: Fix vdosys* compatible strings
arm64: dts: rockchip: align rk3399 DMC OPP table with bindings
arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
arm64: dts: rockchip: fix probe of analog sound card on rock-3a
arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1
arm64: dts: rockchip: fix input enable pinconf on rk3399
ARM: dts: rockchip: add power-domains property to dp node on rk3288
arm64: dts: rockchip: add io domain setting to rk3566-box-demo
arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a
arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc
arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro
arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This is a little bigger that I'd hope for this late in the cycle, but
they're all pretty concrete fixes and the only one that's bigger than
a few lines is pmdp_collapse_flush() (which is almost all
boilerplate/comment). It's also all bug fixes for issues that have
been around for a while.
So I think it's not all that scary, just bad timing.
- avoid partial TLB fences for huge pages, which are disallowed by
the ISA
- avoid missing a frame when dumping stacks
- avoid misaligned accesses (and possibly overflows) in kprobes
- fix a race condition in tracking page dirtiness"
* tag 'riscv-for-linus-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup race condition on PG_dcache_clean in flush_icache_pte
riscv: kprobe: Fixup misaligned load text
riscv: stacktrace: Fix missing the first frame
riscv: mm: Implement pmdp_collapse_flush for THP
|
|
Some Kconfig options have moved around, so adapt the defconfig files
accordingly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull ceph fix from Ilya Dryomov:
"A fix for a pretty embarrassing omission in the session flush handler
from Xiubo, marked for stable"
* tag 'ceph-for-6.2-rc8' of https://github.com/ceph/ceph-client:
ceph: flush cap releases when the session is flushed
|
|
Pull block fix from Jens Axboe:
"A single fix for a smatch regression introduced in this merge window"
* tag 'block-6.2-2023-02-10' of git://git.kernel.dk/linux:
nvme-auth: mark nvme_auth_wq static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last one for 6.2, a collection of the fixes that have
been gathered since the last pull.
All changes are small and trivial device-specific fixes"
* tag 'sound-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add Positivo N14KP6-TG
ASoC: topology: Return -ENOMEM on memory allocation failure
ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()
ASoC: fsl_sai: fix getting version from VERID
ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.
ALSA: hda/realtek: Add quirk for ASUS UM3402 using CS35L41
ASoC: codecs: es8326: Fix DTS properties reading
ASoC: tas5805m: add missing page switch.
ASoC: tas5805m: rework to avoid scheduling while atomic.
ALSA: hda/realtek: Enable mute/micmute LEDs on HP Elitebook, 645 G9
ASoC: SOF: amd: Fix for handling spurious interrupts from DSP
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro 360
ALSA: pci: lx6464es: fix a debug loop
ASoC: rt715-sdca: fix clock stop prepare timeout issue
|
|
During the driver conversion to shmem, the start address for the
scanout buffer was set to the base PCI address.
In most cases it works because only the lower 24bits are used, and
due to alignment it was almost always 0.
But on some unlucky hardware, it's not the case, and some uninitialized
memory is displayed on the BMC.
With shmem, the primary plane is always at offset 0 in GPU memory.
* v2: rewrite the patch to set the offset to 0. (Thomas Zimmermann)
* v3: move the change to plane_init() and also fix the cursor plane.
(Jammy Huang)
Tested on a sr645 affected by this bug.
Fixes: f2fa5a99ca81 ("drm/ast: Convert ast to SHMEM")
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jammy Huang <jammy_huang@aspeedtech.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209094417.21630-1-jfalempe@redhat.com
|
|
Some Kconfig options has moved around after a 'make savedefconfig' run,
so move them to their new location to make it easier to see what other
options got removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the admin guide for the Cross-Thread Return Predictions vulnerability.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <60f9c0b4396956ce70499ae180cb548720b25c7e.1675956146.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
By default, KVM/SVM will intercept attempts by the guest to transition
out of C0. However, the KVM_CAP_X86_DISABLE_EXITS capability can be used
by a VMM to change this behavior. To mitigate the cross-thread return
address predictions bug (X86_BUG_SMT_RSB), a VMM must not be allowed to
override the default behavior to intercept C0 transitions.
Use a module parameter to control the mitigation on processors that are
vulnerable to X86_BUG_SMT_RSB. If the processor is vulnerable to the
X86_BUG_SMT_RSB bug and the module parameter is set to mitigate the bug,
KVM will not allow the disabling of the HLT, MWAIT and CSTATE exits.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <4019348b5e07148eb4d593380a5f6713b93c9a16.1675956146.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Certain AMD processors are vulnerable to a cross-thread return address
predictions bug. When running in SMT mode and one of the sibling threads
transitions out of C0 state, the other sibling thread could use return
target predictions from the sibling thread that transitioned out of C0.
The Spectre v2 mitigations cover the Linux kernel, as it fills the RSB
when context switching to the idle thread. However, KVM allows a VMM to
prevent exiting guest mode when transitioning out of C0. A guest could
act maliciously in this situation, so create a new x86 BUG that can be
used to detect if the processor is vulnerable.
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <91cec885656ca1fcd4f0185ce403a53dd9edecb7.1675956146.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes
Amlogic fixes for v6.2-rc, take2:
- Change MMC controllers interrupts flag to level on all families, fixes irq loss & performance issues when cpu loaded
* tag 'amlogic-fixes-v6.2-rc-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-g12-common: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitive
Link: https://lore.kernel.org/r/761c2ebc-7c93-8504-35ae-3e84ad216bcf@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When a fbdev with deferred I/O is once opened and closed, the dirty
pages still remain queued in the pageref list, and eventually later
those may be processed in the delayed work. This may lead to a
corruption of pages, hitting an Oops.
This patch makes sure to cancel the delayed work and clean up the
pageref list at closing the device for addressing the bug. A part of
the cleanup code is factored out as a new helper function that is
called from the common fb_release().
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Miko Larsson <mikoxyzzz@gmail.com>
Fixes: 56c134f7f1b5 ("fbdev: Track deferred-I/O pages in pageref struct")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230129082856.22113-1-tiwai@suse.de
|
|
The current kernel does not support the SN6180 codec chip.
Add the SN6180 codec configuration item to kernel.
Signed-off-by: Bo Liu <bo.liu@senarytech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1675908828-1012-1-git-send-email-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: ef8d2ffedf18 ("ARM64: dts: meson-gxbb: add MMC support")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/76e042e0-a610-5ed5-209f-c4d7f879df44@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
level-sensitive
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: 4759fd87b928 ("arm64: dts: meson: g12a: add mmc nodes")
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/27d89baa-b8fa-baca-541b-ef17a97cde3c@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
The usage of edge-triggered interrupts lead to lost interrupts under load,
see [0]. This was confirmed to be fixed by using level-triggered
interrupts.
The report was about SDIO. However, as the host controller is the same
for SD and MMC, apply the change to all mmc controller instances.
[0] https://www.spinics.net/lists/linux-mmc/msg73991.html
Fixes: 221cf34bac54 ("ARM64: dts: meson-axg: enable the eMMC controller")
Reported-by: Peter Suti <peter.suti@streamunlimited.com>
Tested-by: Vyacheslav Bocharov <adeep@lexina.in>
Tested-by: Peter Suti <peter.suti@streamunlimited.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/c00655d3-02f8-6f5f-4239-ca2412420cad@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Commit b3973bb40041 ("vmxnet3: set correct hash type based on
rss information") added hashType information into skb. However,
rssType field is populated for eop descriptor. This can lead
to incorrectly reporting of hashType for packets which use
multiple rx descriptors. Multiple rx descriptors are used
for Jumbo frame or LRO packets, which can hit this issue.
This patch moves the RSS codeblock under eop descritor.
Cc: stable@vger.kernel.org
Fixes: b3973bb40041 ("vmxnet3: set correct hash type based on rss information")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Peng Li <lpeng@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Link: https://lore.kernel.org/r/20230208223900.5794-1-doshir@vmware.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot was able to trigger a warning [1] from net_free()
calling ref_tracker_dir_exit(&net->notrefcnt_tracker)
while the corresponding ref_tracker_dir_init() has not been
done yet.
copy_net_ns() can indeed bypass the call to setup_net()
in some error conditions.
Note:
We might factorize/move more code in preinit_net() in the future.
[1]
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 5817 Comm: syz-executor.3 Not tainted 6.2.0-rc7-next-20230208-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
assign_lock_key kernel/locking/lockdep.c:982 [inline]
register_lock_class+0xdb6/0x1120 kernel/locking/lockdep.c:1295
__lock_acquire+0x10a/0x5df0 kernel/locking/lockdep.c:4951
lock_acquire.part.0+0x11c/0x370 kernel/locking/lockdep.c:5691
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
ref_tracker_dir_exit+0x52/0x600 lib/ref_tracker.c:24
net_free net/core/net_namespace.c:442 [inline]
net_free+0x98/0xd0 net/core/net_namespace.c:436
copy_net_ns+0x4f3/0x6b0 net/core/net_namespace.c:493
create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:228
ksys_unshare+0x449/0x920 kernel/fork.c:3205
__do_sys_unshare kernel/fork.c:3276 [inline]
__se_sys_unshare kernel/fork.c:3274 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3274
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
Fixes: 0cafd77dcd03 ("net: add a refcount tracker for kernel sockets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230208182123.3821604-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Guillaume Nault says:
====================
ipv6: Fix socket connection with DSCP fib-rules.
The "flowlabel" field of struct flowi6 is used to store both the actual
flow label and the DS Field (or Traffic Class). However the .connect
handlers of datagram and TCP sockets don't set the DS Field part when
doing their route lookup. This breaks fib-rules that match on DSCP.
====================
Link: https://lore.kernel.org/r/cover.1675875519.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the fib_rule6_send and fib_rule4_send tests to verify that DSCP
values are properly taken into account when UDP or TCP sockets try to
connect().
Tests are done with nettest, which needs a new option to specify
the DS Field value of the socket being tested. This new option is
named '-Q', in reference to the similar option used by ping.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Take into account the IPV6_TCLASS socket option (DSCP) in
tcp_v6_connect(). Otherwise fib6_rule_match() can't properly
match the DSCP value, resulting in invalid route lookup.
For example:
ip route add unreachable table main 2001:db8::10/124
ip route add table 100 2001:db8::10/124 dev eth0
ip -6 rule add dsfield 0x04 table 100
echo test | socat - TCP6:[2001:db8::11]:54321,ipv6-tclass=0x04
Without this patch, socat fails at connect() time ("No route to host")
because the fib-rule doesn't jump to table 100 and the lookup ends up
being done in the main table.
Fixes: 2cc67cc731d9 ("[IPV6] ROUTE: Routing by Traffic Class.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Take into account the IPV6_TCLASS socket option (DSCP) in
ip6_datagram_flow_key_init(). Otherwise fib6_rule_match() can't
properly match the DSCP value, resulting in invalid route lookup.
For example:
ip route add unreachable table main 2001:db8::10/124
ip route add table 100 2001:db8::10/124 dev eth0
ip -6 rule add dsfield 0x04 table 100
echo test | socat - UDP6:[2001:db8::11]:54321,ipv6-tclass=0x04
Without this patch, socat fails at connect() time ("No route to host")
because the fib-rule doesn't jump to table 100 and the lookup ends up
being done in the main table.
Fixes: 2cc67cc731d9 ("[IPV6] ROUTE: Routing by Traffic Class.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon Horman says:
====================
nfp: fix schedule in atomic context when offloading sa
Yinjun Zhang says:
IPsec offloading callbacks may be called in atomic context, sleep is
not allowed in the implementation. Now use workqueue mechanism to
avoid this issue.
Extend existing workqueue mechanism for multicast configuration only
to universal use, so that all configuring through mailbox asynchoronously
can utilize it.
Also fix another two incorrect use of mailbox in IPsec:
1. Need lock for race condition when accessing mbox
2. Offset of mbox access should depends on tlv caps
====================
Link: https://lore.kernel.org/r/20230208102258.29639-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IPsec offloading callbacks may be called in atomic context, sleep is
not allowed in the implementation. Now use workqueue mechanism to
avoid this issue.
Extend existing workqueue mechanism for multicast configuration only
to universal use, so that all configuring through mailbox asynchronously
can utilize it.
Fixes: 859a497fe80c ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mailbox configuration mechanism requires writing several registers,
which shouldn't be interrupted, so need lock to avoid race condition.
The base offset of mailbox configuration registers is not fixed, it
depends on TLV caps read from application firmware.
Fixes: 859a497fe80c ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Code blocks handling BCMA_CHIP_ID_BCM5357 and BCMA_CHIP_ID_BCM53572 were
incorrectly unified. Chip package values are not unique and cannot be
checked independently. They are meaningful only in a context of a given
chip.
Packages BCM5358 and BCM47188 share the same value but then belong to
different chips. Code unification resulted in treating BCM5358 as
BCM47188 and broke its initialization.
Link: https://github.com/openwrt/openwrt/issues/8278
Fixes: cb1b0f90acfe ("net: ethernet: bgmac: unify code of the same family")
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230208091637.16291-1-zajec5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes.
The amdgpu had a few small fixes to display flicker on certain
configurations, however it was found the the flicker was lessened but
there were other unintended consequences, so for now they've been
reverted and replaced with an option for users to test with so future
fixes can be developed.
Otherwise apart from the usual bunch of i915 and amdgpu, there's a
client, virtio-gpu and an nvidiafb fix that reorders its loading to
avoid failure.
client:
- refcount fix
amdgpu:
- a bunch of attempted flicker fixes that regressed turned into a
user workaround option for now
- Properly fix S/G display with AGP aperture enabled
- Fix cursor offset with 180 rotation
- SMU13 fixes
- Use TGID for GPUVM traces
- Fix oops on in fence error path
- Don't run IB tests on hw rings when sw rings are in use
- memory leak fix
i915:
- Display watermark fix
- fbdev fix for PSR, FBC, DRRS
- Move fd_install after last use of fence
- Initialize the obj flags for shmem objects
- Fix VBT DSI DVO port handling
virtio-gpu:
- fence fix
nvidiafb:
- regression fix for driver load when no hw supported"
* tag 'drm-fixes-2023-02-10' of git://anongit.freedesktop.org/drm/drm: (27 commits)
Revert "drm/amd/display: disable S/G display on DCN 3.1.5"
Revert "drm/amd/display: disable S/G display on DCN 2.1.0"
Revert "drm/amd/display: disable S/G display on DCN 3.1.2/3"
drm/amdgpu: add S/G display parameter
drm/amdgpu/smu: skip pptable init under sriov
amd/amdgpu: remove test ib on hw ring
drm/amdgpu/fence: Fix oops due to non-matching drm_sched init/fini
drm/amdgpu: Use the TGID for trace_amdgpu_vm_update_ptes
drm/amdgpu: Add unique_id support for GC 11.0.1/2
drm/amd/pm: bump SMU 13.0.7 driver_if header version
drm/amd/pm: bump SMU 13.0.0 driver_if header version
drm/amd/pm: add SMU 13.0.7 missing GetPptLimit message mapping
drm/amd/display: fix cursor offset on rotation 180
drm/amd/amdgpu: enable athub cg 11.0.3
Revert "drm/amd/display: disable S/G display on DCN 3.1.4"
drm/amd/display: properly handling AGP aperture in vm setup
drm/amd/display: disable S/G display on DCN 3.1.2/3
drm/amd/display: disable S/G display on DCN 2.1.0
drm/i915: Fix VBT DSI DVO port handling
drm/client: fix circular reference counting issue
...
|