summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-30powerpc/pseries: Fix endian issues in pseries iommu codeAnton Blanchard
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix little endian issue in OF PCI scanAnton Blanchard
This issue was causing the QEMU emulated USB device to fail dring PCI probe. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/vio: use strcpy in modalias_showPrarit Bhargava
Commit e82b89a6f19bae73fb064d1b3dd91fcefbb478f4 used strcat instead of strcpy which can result in an overflow of newlines on the buffer. Signed-off-by: Prarit Bhargava Cc: benh@kernel.crashing.org Cc: ben@decadent.org.uk Cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix 64K page size support for PPC44xAlistair Popple
PPC44x supports page sizes other than 4K however when 64K page sizes are selected compilation fails. This is due to a change in the definition of pgtable_t introduced by the following patch: commit 5c1f6ee9a31cbdac90bbb8ae1ba4475031ac74b4 Author: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> powerpc: Reduce PTE table memory wastage The above patch only implements the new layout for PPC64 so it doesn't compile for PPC32 with a 64K page size. Ideally we should implement the same layout for PPC32 however for the meantime this patch reverts the definition of pgtable_t for PPC32. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: FA_DUMP depends on KEXECMichael Ellerman
If you try and build the FA_DUMP code with CONFIG_KEXEC=n, you see errors such as the following: arch/powerpc/kernel/fadump.c 408:2: error: 'crashing_cpu' undeclared (first use in this function) 410:2: error: implicit declaration of function 'crash_save_vmcoreinfo' 513:22: error: storage size of 'prstatus' isn't known 520:2: error: implicit declaration of function 'elf_core_copy_kernel_regs' 521:36: error: 'KEXEC_CORE_NOTE_NAME' undeclared (first use in this function) 624:49: error: 'note_buf_t' undeclared (first use in this function) 872:2: error: implicit declaration of function 'paddr_vmcoreinfo_note' 874:18: error: 'vmcoreinfo_max_size' undeclared (first use in this function) This is because although FA_DUMP doesn't use kexec as the actual reboot mechanism, it does use parts of the kexec code to assemble/disassemble the crash image. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix a typo in comments of va to pa conversionVaishnavi Bhat
This patch fixes typo in comments virtual to physical address conversion. Signed-off-by: Vaishnavi Bhat <vaishnavi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Move local setup.h declarations to arch includesRobert Jennings
Move the few declarations from arch/powerpc/kernel/setup.h into arch/powerpc/include/asm/setup.h. This resolves a sparse warning for arch/powerpc/mm/numa.c which defines do_init_bootmem() but can't include the setup.h header in the prior path. Resolves: arch/powerpc/mm/numa.c:998:13: warning: symbol 'do_init_bootmem' was not declared. Should it be static? Signed-off-by: Robert C Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Fix warnings for arch/powerpc/mm/numa.cRobert Jennings
Simple fixes for sparse warnings in this file. Resolves: arch/powerpc/mm/numa.c:198:24: warning: Using plain integer as NULL pointer arch/powerpc/mm/numa.c:1157:5: warning: symbol 'hot_add_node_scn_to_nid' was not declared. Should it be static? arch/powerpc/mm/numa.c:1238:28: warning: Using plain integer as NULL pointer arch/powerpc/mm/numa.c:1538:6: warning: symbol 'topology_schedule_update' was not declared. Should it be static? Signed-off-by: Robert C Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc/boot: Don't change link address for OF-based platformsPaul Mackerras
Commit c55aef0e5bc6 ("powerpc/boot: Change the load address for the wrapper to fit the kernel") adjusts the wrapper address unnecessarily for platforms that use arch/powerpc/boot/of.c, since the code there allocates space for the kernel wherever it can find it and doesn't necessarily load the kernel at address 0. Changing the link address is actually harmful since it can cause the zImage to overlap with Open Firmware and thus fail to boot. To fix this, we set make_space to n for all of the platforms that use of.o. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Add includes to fix powernv/rng.c buildStephen Rothwell
Caused by commit a4da0d50b2a0 ("powerpc: Implement arch_get_random_long/int() for powernv") from the powerpc tree interacting with commit b5b4bb3f6a11 ("of: only include prom.h on sparc") from the dt-rh tree. I added this merge fix patch (which will need to be sent to Linus when these two trees get merged, or could be applied now to the powerpc tree): [ Also add linux/smp.h to get cpu_to_chip_id -- BenH ] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30drm: allow DRM_IOCTL_VERSION on render-nodesDavid Herrmann
DRM_IOCTL_VERSION is a reliable way to get the driver-name and version information. It's not related to the interface-version (SET_VERSION ioctl) so we can safely enable it on render-nodes. Note that gbm uses udev-BUSID to load the correct mesa driver. However, the VERSION ioctl should be the more reliable way to do this (in case we add new DRM-bus drivers which have no BUSID or similar). Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-29bgmac: don't update slot on skb alloc/dma mapping errorNathan Hintz
Don't update the slot in "bgmac_dma_rx_skb_for_slot" unless both the skb alloc and dma mapping are successful; and free the newly allocated skb if a dma mapping error occurs. This relieves the caller of the need to deduce/execute the appropriate cleanup action required when an error occurs. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29ibm emac: Fix locking for enable/disable eob irqAlistair Popple
Calls to mal_enable_eob_irq perform a read-write-modify of a dcr to enable device irqs which is protected by a spin lock. However calls to mal_disable_eob_irq do not take the corresponding lock. This patch resolves the problem by ensuring that calls to mal_disable_eob_irq also take the lock. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29ibm emac: Don't call napi_complete if napi_reschedule failedAlistair Popple
This patch fixes a bug which would trigger the BUG_ON() at net/core/dev.c:4156. It was found that this was due to continuing processing in the current poll call even when the call to napi_reschedule failed, indicating the device was already on the polling list. This resulted in an extra call to napi_complete which triggered the BUG_ON(). This patch ensures that we only contine processing rotting packets in the current mal_poll call if we are not already on the polling list. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29virtio-net: correctly handle cpu hotplug notifier during resumingJason Wang
commit 3ab098df35f8b98b6553edc2e40234af512ba877 (virtio-net: don't respond to cpu hotplug notifier if we're not ready) tries to bypass the cpu hotplug notifier by checking the config_enable and does nothing is it was false. So it need to try to hold the config_lock mutex which may happen in atomic environment which leads the following warnings: [ 622.944441] CPU0 attaching NULL sched-domain. [ 622.944446] CPU1 attaching NULL sched-domain. [ 622.944485] CPU0 attaching NULL sched-domain. [ 622.950795] BUG: sleeping function called from invalid context at kernel/mutex.c:616 [ 622.950796] in_atomic(): 1, irqs_disabled(): 1, pid: 10, name: migration/1 [ 622.950796] no locks held by migration/1/10. [ 622.950798] CPU: 1 PID: 10 Comm: migration/1 Not tainted 3.12.0-rc5-wl-01249-gb91e82d #317 [ 622.950799] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 622.950802] 0000000000000000 ffff88001d42dba0 ffffffff81a32f22 ffff88001bfb9c70 [ 622.950803] ffff88001d42dbb0 ffffffff810edb02 ffff88001d42dc38 ffffffff81a396ed [ 622.950805] 0000000000000046 ffff88001d42dbe8 ffffffff810e861d 0000000000000000 [ 622.950805] Call Trace: [ 622.950810] [<ffffffff81a32f22>] dump_stack+0x54/0x74 [ 622.950815] [<ffffffff810edb02>] __might_sleep+0x112/0x114 [ 622.950817] [<ffffffff81a396ed>] mutex_lock_nested+0x3c/0x3c6 [ 622.950818] [<ffffffff810e861d>] ? up+0x39/0x3e [ 622.950821] [<ffffffff8153ea7c>] ? acpi_os_signal_semaphore+0x21/0x2d [ 622.950824] [<ffffffff81565ed1>] ? acpi_ut_release_mutex+0x5e/0x62 [ 622.950828] [<ffffffff816d04ec>] virtnet_cpu_callback+0x33/0x87 [ 622.950830] [<ffffffff81a42576>] notifier_call_chain+0x3c/0x5e [ 622.950832] [<ffffffff810e86a8>] __raw_notifier_call_chain+0xe/0x10 [ 622.950835] [<ffffffff810c5556>] __cpu_notify+0x20/0x37 [ 622.950836] [<ffffffff810c5580>] cpu_notify+0x13/0x15 [ 622.950838] [<ffffffff81a237cd>] take_cpu_down+0x27/0x3a [ 622.950841] [<ffffffff81136289>] stop_machine_cpu_stop+0x93/0xf1 [ 622.950842] [<ffffffff81136167>] cpu_stopper_thread+0xa0/0x12f [ 622.950844] [<ffffffff811361f6>] ? cpu_stopper_thread+0x12f/0x12f [ 622.950847] [<ffffffff81119710>] ? lock_release_holdtime.part.7+0xa3/0xa8 [ 622.950848] [<ffffffff81135e4b>] ? cpu_stop_should_run+0x3f/0x47 [ 622.950850] [<ffffffff810ea9b0>] smpboot_thread_fn+0x1c5/0x1e3 [ 622.950852] [<ffffffff810ea7eb>] ? lg_global_unlock+0x67/0x67 [ 622.950854] [<ffffffff810e36b7>] kthread+0xd8/0xe0 [ 622.950857] [<ffffffff81a3bfad>] ? wait_for_common+0x12f/0x164 [ 622.950859] [<ffffffff810e35df>] ? kthread_create_on_node+0x124/0x124 [ 622.950861] [<ffffffff81a45ffc>] ret_from_fork+0x7c/0xb0 [ 622.950862] [<ffffffff810e35df>] ? kthread_create_on_node+0x124/0x124 [ 622.950876] smpboot: CPU 1 is now offline [ 623.194556] SMP alternatives: lockdep: fixing up alternatives [ 623.194559] smpboot: Booting Node 0 Processor 1 APIC 0x1 ... A correct fix is to unregister the hotcpu notifier during restore and register a new one in resume. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Wanlong Gao <gaowanlong@cn.fujitsu.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30Merge tag 'drm-intel-fixes-2013-10-29' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Regression and warn fixes for i915. * tag 'drm-intel-fixes-2013-10-29' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb drm/i915: No LVDS hardware on Intel D410PT and D425KT drm/i915/dp: workaround BIOS eDP bpp clamping issue drm/i915: Add HSW CRT output readout support drm/i915: Add support for pipe_bpp readout
2013-10-29gpiolib: provide a declaration of seq_file in gpio/driver.hStephen Rothwell
Fixes this build error: In file included from include/asm-generic/gpio.h:13:0, from include/linux/gpio.h:51, from include/linux/of_gpio.h:20, from arch/powerpc/sysdev/ppc4xx_gpio.c:29: include/linux/gpio/driver.h:85:14: error: 'struct seq_file' declared inside= parameter list [-Werror] include/linux/gpio/driver.h:85:14: error: its scope is only this definition= or declaration, which is probably not what you want [-Werror] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-29gpiolib: include gpio/consumer.h in of_gpio.h for desc_to_gpio()Stephen Rothwell
Fixes this build error on sparc: In file included from drivers/spi/spi.c:33:0: include/linux/of_gpio.h: In function 'of_get_named_gpio_flags': include/linux/of_gpio.h:93:3: error: implicit declaration of function 'desc_to_gpio' [-Werror=implicit-function-declaration] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-29gpio: provide stubs for devres gpio functionsLinus Walleij
commit 6b3d8145dcfdbbb43f13544e16f44f4574f941dd "gpiolib: make GPIO_DEVRES depend on GPIOLIB" breaks builds when device drivers are using devm_gpio* devres functions without enabling GPIOLIB, relying on the devres code to be compiled anyway. Provide stubs so that we get these if we're using the devres functions without GPIOLIB. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-29gpiolib: devres: add missing headersAlexandre Courbot
Add missing headers for drivers/gpiolib/devres.c. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-29gpiolib: make GPIO_DEVRES depend on GPIOLIBAlexandre Courbot
Current Kconfig allows GPIO_DEVRES to be selected and compiled without GPIOLIB. This does not make sense anymore since GPIOLIB has become the exclusive way to deal with GPIOs. This patch makes GPIO_DEVRES available only if GPIOLIB is selected. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-29staging: ft1000: return values corrected in scram_start_dwnldKelley Nielsen
The ft1000 usb driver ignores expected Linux error codes, and uses two values defined in ft1000_usb.h: STATUS_SUCCESS 0, and STATUS_FAILURE 0x1001; and sometimes -1. This patch changes the return values of the function scram_start_dwnld to match the status of the handshake returned by its helper functions, get_handshake and get_handshake_usb. If the handshake fails, -ENETRESET is returned instead of the inappropriate STATUS_FAILURE. Also, a new test has been added to differentiate failure due to timeout from failure due to net reset (the default). -ETIMEDOUT is returned in this case. Finally, 0 is returned on success instead of STATUS_SUCCESS. Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29staging: ft1000: change values of status return variable in ↵Kelley Nielsen
write_dpram32_and_check The ft1000 usb driver ignores expected Linux error codes, and uses two values defined in ft1000_usb.h: STATUS_SUCCESS 0, and STATUS_FAILURE 0x1001; and sometimes -1. This patch changes the return value of the function write_dpram_32_and check to 0 or -EREMOTEIO, respectively. The relevant change was made in the helper function check_buffers (which is only called from write_dpram32_and_check); it now returns 0 on success and -EREMOTEIO on failure, and this is allowed to propagate through write_dpram32_and_check. Assignments to the return variable status that are no longer needed were removed as well. In one function up the call chain, dsp_reload in ft1000_hw.c, the status variable was changed from u16 to int to avoid collecting a signed value in an unsigned variable. Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29staging: bcm: Remove unnecessary pointer castingLisa Nguyen
Some void pointers can be assigned to other pointer variables in functions without casting. Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29imx-drm: ipuv3-crtc: Invert IPU DI0 clock polarityFabio Estevam
sig_cfg.clk_pol controls the 'di0_polarity_disp_clk' bit of register IPUx_DI0_GENERAL through the following code in imx-drm/ipu-v3/ipu-di.c: if (!sig->clk_pol) di_gen |= DI_GEN_POLARITY_DISP_CLK; With 'di0_polarity_disp_clk' bit set we do not have stable HDMI output on mx6solo: contours of pictures look jittery and the white colour does not appear really white. Russell King initially reported this problem at: http://www.spinics.net/lists/arm-kernel/msg279805.html Inverting 'di0_polarity_disp_clk' leads to stable HDMI output image. Tested on the following boards: - mx6solowandboard (HDMI output) - mx6qwandboard (HDMI output) - mx6qsabrelite (LVDS) - mx6qsabresd (HDMI output and LVDS) - mx6dlsabresd (HDMI output) - mx53qsb (parallel WVGA display) Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Suggested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: cdc-wdm: ignore speed change notificationsBjørn Mork
The only notification supported by the Device Management class is Response Available. But this driver is also used as a subdriver of other CDC classes, allowing notifications like Speed Change and Network Connection. This results in log messages which are only confusing to an end user: [66255.801874] cdc_mbim 1-3:1.5: unknown notification 42 received: index 5 len 8 These drivers use cdc-wdm as a subdriver to allow access to an embedded management protocol, and all management is expected to use this protocol. There is therefore no need to handle any of these optional CDC notifications. Instead we can let the cdc-wdm driver recognize them and log a debug level message instead of an error. Reported-by: Rob Gardner <robmatic@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29USB: cdc-wdm: support back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE ↵Greg Suarez
notifications Some MBIM devices send back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications when sending a message over multiple fragments or when there are unsolicited messages available. Count up the number of USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications received and decrement the count and submit the urb for the next response each time userspace completes a read the response. Signed-off-by: Greg Suarez <gsuarez@smithmicro.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29serial: sh-sci: Enable the driver on all ARM platformsLaurent Pinchart
Renesas ARM platforms are transitioning from single-platform to multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the driver available on all ARM platforms to enable it on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI, and increase build testing coverage with COMPILE_TEST. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29w1-gpio: Use devm_* functionsMarkus Pargmann
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29w1-gpio: Detect of_gpio_error for first gpioMarkus Pargmann
The first DT gpio is necessary for this driver, but errors returned for of_get_gpio are ignored. This patch adds a return value check for the first of_get_gpio. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29uio: Pass pointers to virt_to_page(), not integersBen Hutchings
Most architectures define virt_to_page() as a macro that casts its argument such that an argument of type unsigned long will be accepted without complaint. However, the proper type is void *, and passing unsigned long results in a warning on MIPS. Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usbatm: Fix dynamic_debug / ratelimited atm_dbg and atm_rldbg macrosJoe Perches
Fix atm_dbg to use normal pr_debug not dynamic_pr_debug because dynamic_pr_debug may not be compiled in at all. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29printk: pr_debug_ratelimited: check state first to reduce "callbacks ↵Joe Perches
suppressed" messages pr_debug_ratelimited should be coded similarly to dev_dbg_ratelimited to reduce the "callbacks suppressed" messages. Add #include <linux/dynamic_debug.h> to printk.h. Unfortunately, this new #include must be after the prototype/declaration of function printk. It may be better to split out these _ratelimited declarations into a separate file one day. Any use of these pr_<foo>_ratelimited functions must also have another specific #include <ratelimited.h>. Most users have this done indirectly via #include <linux/kernel.h> printk.h may not #include <linux/ratelimit.h> as it causes circular dependencies and compilation failures. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: usbtest: support bos descriptor test for usb 3.0Huang Rui
In Test 9 of usbtest module, it is used for performing chapter 9 tests N times. This patch adds to support getting bos descriptor test scenario for USB 3.0. Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29USB: phy: samsung: Support multiple PHYs of same typeAnton Tikhomirov
This patch removes limitation when only one PHY of specific type could be used. Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: wusbcore: change WA_SEGS_MAX to a legal valueThomas Pugliese
change WA_SEGS_MAX to a number that is legal according to the WUSB spec. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: wusbcore: add a quirk for Alereon HWA device isoc behaviorThomas Pugliese
Add a quirk for Alereon HWA devices to concatenate the frames of isoc transfer requests. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: wusbcore: combine multiple isoc frames in a single transfer request.Thomas Pugliese
Combine multiple isoc frames in a single transfer request. This allows the HWA to take advantage of bursting to deliver data to endpoints whose logical service interval is less than the minimum wireless USB service interval of 4ms. Wireless audio quality is much improved after this update. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: wusbcore: set the RPIPE wMaxPacketSize value correctlyThomas Pugliese
For isochronous endpoints, set the RPIPE wMaxPacketSize value using wOverTheAirPacketSize from the endpoint companion descriptor instead of wMaxPacketSize from the normal endpoint descriptor. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: chipidea: host: more enhancement when ci->hcd is NULLPeter Chen
Like http://marc.info/?l=linux-usb&m=138200449428874&w=2 said: two more things are needed to be done: - If host_start fails, the host_stop should not be called, so we add check that ci->hcd is not NULL. - if the host_start fails at the beginning, we need to consider regulator mismatch issue. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: ohci: remove ep93xx bus glue platform driverH Hartley Sweeten
Convert ep93xx to use the OHCI platform driver and remove the ohci-ep93xx bus glue driver. Enable CONFIG_OHCI_HCD_PLATFORM in the ep93xx_defconfig so that USB is still enabled by default on the EP93xx platform. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Olof Johansson <olof@lixom.net> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29usb: usbtest: fix checkpatch warning as sizeof code styleHuang Rui
Script checkpatch.pl always complains incorrect code style like below: WARNING: sizeof *udev->bos->desc should be sizeof(*udev->bos->desc) This patch fixes the warning for usbtest module. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29UWB: clean up attribute use by using ATTRIBUTE_GROUPS()Greg Kroah-Hartman
The ATTRIBUTE_GROUPS() macro can be used in the uwb code to reduce the number of lines of code. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29uio: fix memory leakCong Ding
we have to call kobject_put() to clean up the kobject after function kobject_init(), kobject_add(), or kobject_uevent() is called. Signed-off-by: Cong Ding <dinggnu@gmail.com> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29serial: mfd: Staticize local symbolsJingoo Han
These local symbols are used only in this file. Fix the following sparse warnings: drivers/tty/serial/mfd.c:296:6: warning: symbol 'hsu_dma_tx' was not declared. Should it be static? drivers/tty/serial/mfd.c:343:6: warning: symbol 'hsu_dma_start_rx_chan' was not declared. Should it be static? drivers/tty/serial/mfd.c:389:6: warning: symbol 'hsu_dma_rx' was not declared. Should it be static? drivers/tty/serial/mfd.c:1186:17: warning: symbol 'serial_hsu_pops' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29serial: omap: fix a few checkpatch warningsPhilippe Proulx
Signed-off-by: Philippe Proulx <philippe.proulx@savoirfairelinux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29serial: omap: improve RS-485 performancePhilippe Proulx
If RS-485 is enabled, make the OMAP UART fire THR interrupts when both TX FIFO and TX shift register are empty instead of polling the equivalent status bit. This removes the burst of interrupt requests seen at every end of transmission. Also: the comment said that the TX FIFO trigger level was set at 16 characters when it's 32 in reality. Signed-off-by: Philippe Proulx <philippe.proulx@savoirfairelinux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29mrst_max3110: fix unbalanced IRQ issue during resumeChen, Jie
During resume, a startup will request_irq again, meantime resume function's enable_irq will cause unbalanced IRQ issue. Fix this issue by moving request_irq to probe function. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Chen, Jie <jie.d.chen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29serial: omap: Add support for optional wake-upTony Lindgren
With the recent pinctrl-single changes, omaps can treat wake-up events from deeper idle states as interrupts. There's a separate "io chain" controller on most omaps that stays enabled when the device hits off-idle and the regular interrupt controller is powered off. Let's add support for the optional second interrupt for wake-up events. And then serial-omap can manage the wake-up interrupt from it's runtime PM calls to avoid spurious interrupts during runtime. Note that the wake interrupt is board specific as it uses the UART RX pin, and for omap3, there are six pin options for UART3 RX pin. Also Note that the legacy platform based booting handles the wake-ups in the legacy mux driver and does not need to pass the wake-up interrupt to the driver. And finally, to pass the wake-up interrupt in the dts file, either interrupt-map or the pending interrupts-extended property needs to be passed. It's probably best to use interrupts-extended when it's available. Cc: Felipe Balbi <balbi@ti.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29serial: sirf: remove duplicate definesMichael Opdenacker
This patch removes duplicate defines in drivers/tty/serial/sirfsoc_uart.h Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-15 06:48:34 +0000