summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-29MIPS: Enable entries for SIGSYS in struct siginfo.Ralf Baechle
This is necessary because MIPS doesn't use HAVE_ARCH_SIGINFO_T for historical reasons. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: 64-bit: Mark native syscall table as data object.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: compat: Mark N32 syscall table as data object.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: compat: Export O32 syscall table and rename to avoid duplicate symbol.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: mm: Use scratch for PGD when !CONFIG_MIPS_PGD_C0_CONTEXTJayachandran C
Allow usage of scratch register for current pgd even when MIPS_PGD_C0_CONTEXT is not configured. MIPS_PGD_C0_CONTEXT is set for 64r2 platforms to indicate availability of Xcontext for saving cpuid, thus freeing Context to be used for saving PGD. This option was also tied to using a scratch register for storing PGD. This commit will allow usage of scratch register to store the current pgd if one can be allocated for the platform, even when MIPS_PGD_C0_CONTEXT is not set. The cpuid will be kept in the CP0 Context register in this case. The code to store the current pgd for the TLB miss handler is now generated in all cases. When scratch register is available, the PGD is also stored in the scratch register. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/5906/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Tell R4k SC and MC variations apartMaciej W. Rozycki
There is no reliable way to tell R4000/R4400 SC and MC variations apart, however simple heuristic should give good results. Only the MC version supports coherent caching so we can rely on such a mode having been set for KSEG0 by the power-on firmware to reliably indicate an MC processor. SC processors reportedly hang on coherent cached memory accesses and Linux is linked to a cached load address so the firmware has to use the correct caching mode to download the kernel image in a cached mode successfully. OTOH if the firmware chooses to use either the non-coherent cached or the uncached mode for KSEG0 on an MC processor, then the SC variant will be reported, just as we currently do, so no regression here. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/5882/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: DECstation CPU feature overridesMaciej W. Rozycki
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5877/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29DEC: Whitespace cleanupMaciej W. Rozycki
Commit 7034228792cc561e79ff8600f02884bd4c80e287 [MIPS: Whitespace cleanup.] did a lot of good and a little damage. Revert the damage. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5875/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: DECstation I/O ASIC DMA interrupt classesMaciej W. Rozycki
This change complements commits d0da7c002f7b2a93582187a9e3f73891a01d8ee4 [MIPS: DEC: Convert to new irq_chip functions] and 5359b938c088423a28c41499f183cd10824c1816 [MIPS: DECstation I/O ASIC DMA interrupt handling fix] and implements automatic handling of the two classes of DMA interrupts the I/O ASIC implements, informational and errors. Informational DMA interrupts do not stop the transfer and use the `handle_edge_irq' handler that clears the request right away so that another request may be recorded while the previous is being handled. DMA error interrupts stop the transfer and require a corrective action before DMA can be reenabled. Therefore they use the `handle_fasteoi_irq' handler that only clears the request on the way out. Because MIPS processor interrupt inputs, one of which the I/O ASIC's interrupt controller is cascaded to, are level-triggered it is recommended that error DMA interrupt action handlers are registered with the IRQF_ONESHOT flag set so that they are run with the interrupt line masked. This change removes the export of clear_ioasic_dma_irq that now does not have to be called by device drivers to clear interrupts explicitly anymore. Originally these interrupts were cleared in the .end handler of the `irq_chip' structure, before it was removed. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5874/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Remove unnecessary platform dma helper functionsFelix Fietkau
The semantics stay the same - on Cavium Octeon the functions were dead code (it overrides the MIPS DMA ops) - on other platforms they contained no code at all. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5720/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Cobalt: Move to 8250/16550 serial early printk driverYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/948/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Add 8250/16550 serial early printk driverYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/947/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: ZBOOT: Support LZ4 compression schemeFlorian Fainelli
Add support for the LZ4 compression scheme in the ZBOOT decompression stub, in order to support it we need to: - select the "lz4" compression tool to compress the vmlinux.bin payload - memcpy() is also required for decompress_unlz4.c so we share the implementation between GZIP, XZ and now LZ4 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: james.hogan@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/5829/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: ZBOOT: Define program header for text loadable segmentFlorian Fainelli
There is currently no corresponding ELF program header for the "text" loadable segment which is confusing for some bootloader out there such as CFE because it expects to find a program header matching the segment it is trying to load. The Linux kernel ELF binary "vmlinux" has a similar program header for the text segment so we just mimic this here too. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: james.hogan@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/5827/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: ZBOOT: Support XZ compression schemeFlorian Fainelli
Add support for the XZ compression scheme in the ZBOOT decompression stub, in order to support it we need to: - select the "xzkern" compression tool to compress the vmlinux.bin payload - link with ashldi3.o for xz_dec_run() to work - memcpy() is also required for decompress_unxz.c so we share the implementation between GZIP and XZ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: james.hogan@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/5818/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Kbuild: Do not allow building vmlinuz when !ZBOOTFlorian Fainelli
When CONFIG_SYS_SUPPORTS_ZBOOT is not enabled, we will still try to build the decompressor code in arch/mips/boot/compressed as a dependency for producing the vmlinuz target and this will result in the following build failure: OBJCOPY arch/mips/boot/compressed/vmlinux.bin arch/mips/boot/compressed/decompress.c: In function 'decompress_kernel': arch/mips/boot/compressed/decompress.c:105:2: error: implicit declaration of function 'decompress' make[1]: *** [arch/mips/boot/compressed/decompress.o] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [vmlinuz] Error 2 This is a genuine build failure because we have no implementation for the decompress() function body since no kernel compression method defined in CONFIG_KERNEL_(GZIP,BZIP2...) has been enabled. arch/mips/Makefile already guards the install target for the "vmlinuz" binary with a proper ifdef CONFIG_SYS_SUPPORTS_ZBOOT, we now also do the same if we attempt to do a "make vmlinuz" and show that CONFIG_SYS_SUPPORTS_ZBOOT is not enabled. [ralf@linux-mips.org: Cleanup the makefile rule as suggested by James Hogan.] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: richard@nod.at Patchwork: https://patchwork.linux-mips.org/patch/5817/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Fix start of free memory when using initrdGreg Ungerer
Currently when using an initrd on a MIPS system the start of the bootmem region of memory is set to the larger of the end of the kernel bss region (_end) or the end of the initrd. In a typical memory layout where the initrd is at some address above the kernel image this means that the start of the bootmem region will be the end of the initrd. But when we are done processing/loading the initrd we have no way to reclaim the memory region it occupied, and we lose a large chunk of now otherwise empty RAM from our final running system. The bootmem code is designed to allow this initrd to be reserved (and the code in finalize_initrd() currently does this). When the initrd is finally processed/loaded its reserved memory is freed. Fix the setting of the start of the bootmem map to be the end of the kernel. [ralf@linux-mips.org: fold in the fix of Ashok Kumar <ashoks@broadcom.com>.] Signed-off-by: Greg Ungerer <gerg@uclinux.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1574/ Cc: Ashok Kumar <ashoks@broadcom.com> Patchwork: https://patchwork.linux-mips.org/patch/5883/ Patchwork: https://patchwork.linux-mips.org/patch/6028/ Patchwork: https://patchwork.linux-mips.org/patch/6064/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Quiet the building output of vmlinux.32 and vmlinux.64Wu Zhangjin
Based on quiet_cmd_X and cmd_X, this patch quiets the building output of vmlinux.32 and vmlinux.64. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Sam Ravnborg <sam@ravnborg.org> Patchwork: https://patchwork.linux-mips.org/patch/1766/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Panic messages should not end in \n.Ralf Baechle
Panic() is going to add a \n itself and it's annoying if a panic message rolls of the screen on a device with no scrollback. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Use NUMA_NO_NODE instead of -1 for node ID.Ralf Baechle
Original patch by Jianguo Wu <wujianguo@huawei.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: of/pci: Use of_pci_range_parserAndrew Murray
This patch converts the pci_load_of_ranges function to use the new common of_pci_range_parser. Signed-off-by: Andrew Murray <amurray@embedded-bits.co.uk> Signed-off-by: Andrew Murray <Andrew.Murray@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: jason@lakedaemon.net Patchwork: https://patchwork.linux-mips.org/patch/5625/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: BCM47XX: Fix detected clock on Asus WL520GC and WL520GUHauke Mehrtens
The Asus WL520GC and WL520GU are based on the BCM5354 and clocked at 200MHz, but they do not have a clkfreq nvram variable set to the correct value. This adds a workaround for these devices. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5843/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: BCM47XX: Fix clock detection for BCM5354 with 200MHz clockHauke Mehrtens
Some BCM5354 SoCs are running at 200MHz, but it is not possible to read the clock from a register like it is done on some other SoC in ssb and bcma. These devices should have a clkfreq nvram configuration value set to 200, read it and set the clock to the correct value. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5842/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: BCM47XX: Get GPIO pin from nvram configurationHauke Mehrtens
The nvram contains some gpio configuration for boards. It is stored in a gpio<number>=name format e.g. gpio8=wps_button gpio4=robo_reset This patches adds a function to parse these entries, so other driver can use it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5841/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: BCM47XX: Print board name in /proc/cpuinfoHauke Mehrtens
Do not print the constant system type "Broadcom BCM47XX" but print the name of the actual SoC in use and the detected board. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5839/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: BCM47XX: Add board detectionHauke Mehrtens
Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Kconfig: CMP support needs to select SMP as wellMarkos Chandras
The CMP code is only designed to work with SMP configurations. Fixes multiple build problems on certain randconfigs: In file included from arch/mips/kernel/smp-cmp.c:34:0: arch/mips/include/asm/smp.h:28:0: error: "raw_smp_processor_id" redefined [-Werror] In file included from include/linux/sched.h:30:0, from arch/mips/kernel/smp-cmp.c:22: include/linux/smp.h:135:0: note: this is the location of the previous definition In file included from arch/mips/kernel/smp-cmp.c:34:0: arch/mips/include/asm/smp.h:57:20: error: redefinition of 'smp_send_reschedule' In file included from include/linux/sched.h:30:0, from arch/mips/kernel/smp-cmp.c:22: include/linux/smp.h:179:20: note: previous definition of 'smp_send_reschedule' was here In file included from arch/mips/kernel/smp-cmp.c:34:0: arch/mips/include/asm/smp.h: In function 'smp_send_reschedule': arch/mips/include/asm/smp.h:61:8: error: dereferencing pointer to incomplete type [...] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/5812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Move definition of SMP processor id register to header fileJayachandran C
The definition of the CP0 register used to save the smp processor id is repicated in many files, move them all to thread_info.h. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5708/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: ath79: Remove ar933x_uart_platform.h headerGabor Juhos
In commit 15ef17f622033455dcf03ae96256e474073a7b11 (tty: ar933x_uart: use the clk API to get the uart clock), the AR933x UART driver for has been converted to get the uart clock rate via the clock API and it does not use the platform data anymore. Remove the ar933x_uart_platform.h header file and get rid of the superfluous variable and initialization code in platform setup. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5832/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: ath79: simplify platform_get_resource_byname/devm_ioremap_resourceJulia Lawall
Remove unneeded error handling on the result of a call to platform_get_resource_byname when the value is passed to devm_ioremap_resource. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,e,e1; expression ret != 0; identifier l; @@ res = platform_get_resource_byname(...); - if (res == NULL) { ... \(goto l;\|return ret;\) } e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Gabor Juhos <juhosg@openwrt.org> Cc: kernel-janitors@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5725/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: SMP: kill redundant call of generic_smp_call_function_single_interrupt()Jiang Liu
Since commit 9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic similar to smp_call_function_single()", generic_smp_call_function_single_interrupt() is an alias of generic_smp_call_function_interrupt(), so kill the redundant call. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shaohua Li <shli@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Wang YanQing <udknight@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-arch@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5820/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29MIPS: Perf: Fix 74K cache mapDeng-Cheng Zhu
According to Software User's Manual, the event of last-level-cache read/write misses is mapped to even counters. Odd counters of that event number count miss cycles. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6036/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29ARM: dts: use 'status' property for PCIe nodesJingoo Han
Set the default status for PCIe to disabled in the exynos5440.dtsi file and let the board dts files such as exynos5440-ssdk5440.dts enable the PCIe. However, keep the PCIe for SD5v1 board disabled, because there is no PCIe slot on SD5v1 board. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-29Merge branch 'sirf/dt' into next/dtOlof Johansson
From Barry Song: Some missed dt nodes for sirf dts for 3.13. Among them: - add missed chhifbg node in prima2 and atlas6 dts - add missed cell, cs and dma channel for SPI nodes - add missed graphics2d iobg in atlas6 dts - add missed address-cells and size-cells for prima2 I2C - add missed memcontrol-monitor node in prima2 and atlas6 dts * sirf/dt: ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-29ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2CRenwei Wu
here prima2 i2c node is lacking of address-cells and size-cells. Signed-off-by: Renwei Wu <Renwei.Wu@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-29ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodesBarry Song
here we need to add missed cell, cs and dma channels prop in SPI nodes to match with drivers. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-29ARM: dts: sirf: add missed graphics2d iobg in atlas6 dtsJiansong Chen
there is a bus bridge for graphics 2D module lost in current dts, this patch takes it back. Signed-off-by: Jiansong Chen <jiansong.chen@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-29ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dtsBarry Song
CPHIF(Cell phone interface) is behind sys bridge, this patch adds the missed node. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-29ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dtsYe He
memcontrol-monitor provides the ability of monitoring the memory bandwidth. Signed-off-by: Ye He <ye.he@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-29Fix a few incorrectly checked [io_]remap_pfn_range() callsLinus Torvalds
Nico Golde reports a few straggling uses of [io_]remap_pfn_range() that really should use the vm_iomap_memory() helper. This trivially converts two of them to the helper, and comments about why the third one really needs to continue to use remap_pfn_range(), and adds the missing size check. Reported-by: Nico Golde <nico@ngolde.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org.
2013-10-29uprobes: Teach uprobe_copy_process() to handle CLONE_VFORKOleg Nesterov
uprobe_copy_process() does nothing if the child shares ->mm with the forking process, but there is a special case: CLONE_VFORK. In this case it would be more correct to do dup_utask() but avoid dup_xol(). This is not that important, the child should not unwind its stack too much, this can corrupt the parent's stack, but at least we need this to allow to ret-probe __vfork() itself. Note: in theory, it would be better to check task_pt_regs(p)->sp instead of CLONE_VFORK, we need to dup_utask() if and only if the child can return from the function called by the parent. But this needs the arch-dependant helper, and I think that nobody actually does clone(same_stack, CLONE_VM). Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-10-29uprobes: Change uprobe_copy_process() to dup xol_areaOleg Nesterov
This finally fixes the serious bug in uretprobes: a forked child crashes if the parent called fork() with the pending ret probe. Trivial test-case: # perf probe -x /lib/libc.so.6 __fork%return # perf record -e probe_libc:__fork perl -le 'fork || print "OK"' (the child doesn't print "OK", it is killed by SIGSEGV) If the child returns from the probed function it actually returns to trampoline_vaddr, because it got the copy of parent's stack mangled by prepare_uretprobe() when the parent entered this func. It crashes because a) this address is not mapped and b) until the previous change it doesn't have the proper->return_instances info. This means that uprobe_copy_process() has to create xol_area which has the trampoline slot, and its vaddr should be equal to parent's xol_area->vaddr. Unfortunately, uprobe_copy_process() can not simply do __create_xol_area(child, xol_area->vaddr). This could actually work but perf_event_mmap() doesn't expect the usage of foreign ->mm. So we offload this to task_work_run(), and pass the argument via not yet used utask->vaddr. We know that this vaddr is fine for install_special_mapping(), the necessary hole was recently "created" by dup_mmap() which skips the parent's VM_DONTCOPY area, and nobody else could use the new mm. Unfortunately, this also means that we can not handle the errors properly, we obviously can not abort the already completed fork(). So we simply print the warning if GFP_KERNEL allocation (the only possible reason) fails. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-29uprobes: Change uprobe_copy_process() to dup return_instancesOleg Nesterov
uprobe_copy_process() assumes that the new child doesn't need ->utask, it should be allocated by demand. But this is not true if the forking task has the pending ret- probes, the child should report them as well and thus it needs the copy of parent's ->return_instances chain. Otherwise the child crashes when it returns from the probed function. Alternatively we could cleanup the child's stack, but this needs per-arch changes and this is not what we want. At least systemtap expects a .return in the child too. Note: this change alone doesn't fix the problem, see the next change. Reported-by: Martin Cermak <mcermak@redhat.com> Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-29uprobes: Teach __create_xol_area() to accept the predefined vaddrOleg Nesterov
Currently xol_add_vma() uses get_unmapped_area() for area->vaddr, but the next patches need to use the fixed address. So this patch adds the new "vaddr" argument to __create_xol_area() which should be used as area->vaddr if it is nonzero. xol_add_vma() doesn't bother to verify that the predefined addr is not used, insert_vm_struct() should fail if find_vma_links() detects the overlap with the existing vma. Also, __create_xol_area() doesn't need __GFP_ZERO to allocate area. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-29uprobes: Introduce __create_xol_area()Oleg Nesterov
No functional changes, preparation. Extract the code which actually allocates/installs the new area into the new helper, __create_xol_area(). While at it remove the unnecessary "ret = ENOMEM" and "ret = 0" in xol_add_vma(), they both have no effect. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-29uprobes: Change the callsite of uprobe_copy_process()Oleg Nesterov
Preparation for the next patches. Move the callsite of uprobe_copy_process() in copy_process() down to the succesfull return. We do not care if copy_process() fails, uprobe_free_utask() won't be called in this case so the wrong ->utask != NULL doesn't matter. OTOH, with this change we know that copy_process() can't fail when uprobe_copy_process() is called, the new task should either return to user-mode or call do_exit(). This way uprobe_copy_process() can: 1. setup p->utask != NULL if necessary 2. setup uprobes_state.xol_area 3. use task_work_add(p) Also, move the definition of uprobe_copy_process() down so that it can see get_utask(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2013-10-29uprobes: Remove the wrong __weak attributeRalf Baechle
linux/uprobes.h declares arch_uprobe_skip_sstep() as a weak function. But as there is no definition of generic version so when trying to build uprobes for an architecture that doesn't yet have a arch_uprobe_skip_sstep() implementation, the vmlinux will try to call arch_uprobe_skip_sstep() somehwere in Stupidhistan leading to a system crash. We rather want a proper link error so remove arch_uprobe_skip_sstep(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-10-29ASoC: wm8962: Fix null pointer pdata access in I2C probe()Nicolin Chen
When using DT binding to pass private data, there would be Kernel panic occuring due to NULL pointer access in wm8962_i2c_probe(). Thus fix it. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-29tty: xuartps: Fix build error when COMMON_CLK is not setSoren Brinkmann
Clock notifiers are only available when CONFIG_COMMON_CLK is enabled. Hence all notifier related code has to be protected by corresponsing ifdefs. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29tty: xuartps: Fix build error due to missing forward declarationSoren Brinkmann
If CONFIG_PM_SLEEP is enabled and CONFIG_SERIAL_XILINX_PS_UART_CONSOLE is not, a forward declaration of the uart_driver struct is not included, leading to a build error due to an undeclared variable. Fixing this by moving the definition of the struct uart_driver before the definition of the suspend/resume callbacks. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-15 10:14:35 +0000