summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-01riscv: mm: dma-noncoherent: nonstandard cache operations supportLad Prabhakar
Introduce support for nonstandard noncoherent systems in the RISC-V architecture. It enables function pointer support to handle cache management in such systems. This patch adds a new configuration option called "RISCV_NONSTANDARD_CACHE_OPS." This option is a boolean flag that depends on "RISCV_DMA_NONCOHERENT" and enables the function pointer support for cache management in nonstandard noncoherent systems. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1 Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> # Link: https://lore.kernel.org/r/20230818135723.80612-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01riscv: errata: Add Andes alternative portsLad Prabhakar
Add required ports of the Alternative scheme for Andes CPU cores. I/O Coherence Port (IOCP) provides an AXI interface for connecting external non-caching masters, such as DMA controllers. IOCP is a specification option and is disabled on the Renesas RZ/Five SoC due to this reason cache management needs a software workaround. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1 Link: https://lore.kernel.org/r/20230818135723.80612-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01riscv: asm: vendorid_list: Add Andes Technology to the vendors listLad Prabhakar
Add Andes Technology to the vendors list. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1 Link: https://lore.kernel.org/r/20230818135723.80612-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01riscv: dma-mapping: switch over to generic implementationLad Prabhakar
Add helper functions for cache wback/inval/clean and use them arch_sync_dma_for_device()/arch_sync_dma_for_cpu() functions. The proposed changes are in preparation for switching over to generic implementation. Reorganization of the code is based on the patch (Link[0]) from Arnd. For now I have dropped CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU check as this will be enabled by default upon selection of RISCV_DMA_NONCOHERENT and also dropped arch_dma_mark_dcache_clean(). Link[0]: https://lore.kernel.org/all/20230327121317.4081816-22-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20230816232336.164413-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01riscv: dma-mapping: skip invalidation before bidirectional DMAArnd Bergmann
For a DMA_BIDIRECTIONAL transfer, the caches have to be cleaned first to let the device see data written by the CPU, and invalidated after the transfer to let the CPU see data written by the device. riscv also invalidates the caches before the transfer, which does not appear to serve any purpose. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Acked-by: Guo Ren <guoren@kernel.org> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20230816232336.164413-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01riscv: dma-mapping: only invalidate after DMA, not flushArnd Bergmann
No other architecture intentionally writes back dirty cache lines into a buffer that a device has just finished writing into. If the cache is clean, this has no effect at all, but if a cacheline in the buffer has actually been written by the CPU, there is a driver bug that is likely made worse by overwriting that buffer. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20230816232336.164413-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01RISC-V: alternative: Remove feature_probe_funcEvan Green
Now that we're testing unaligned memory copy and making that determination generically, there are no more users of the vendor feature_probe_func(). While I think it's probably going to need to come back, there are no users right now, so let's remove it until it's needed. Signed-off-by: Evan Green <evan@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230818194136.4084400-3-evan@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01RISC-V: Probe for unaligned access speedEvan Green
Rather than deferring unaligned access speed determinations to a vendor function, let's probe them and find out how fast they are. If we determine that an unaligned word access is faster than N byte accesses, mark the hardware's unaligned access as "fast". Otherwise, we mark accesses as slow. The algorithm itself runs for a fixed amount of jiffies. Within each iteration it attempts to time a single loop, and then keeps only the best (fastest) loop it saw. This algorithm was found to have lower variance from run to run than my first attempt, which counted the total number of iterations that could be done in that fixed amount of jiffies. By taking only the best iteration in the loop, assuming at least one loop wasn't perturbed by an interrupt, we eliminate the effects of interrupts and other "warm up" factors like branch prediction. The only downside is it depends on having an rdtime granular and accurate enough to measure a single copy. If we ever manage to complete a loop in 0 rdtime ticks, we leave the unaligned setting at UNKNOWN. There is a slight change in user-visible behavior here. Previously, all boards except the THead C906 reported misaligned access speed of UNKNOWN. C906 reported FAST. With this change, since we're now measuring misaligned access speed on each hart, all RISC-V systems will have this key set as either FAST or SLOW. Currently, we don't have a way to confidently measure the difference between SLOW and EMULATED, so we label anything not fast as SLOW. This will mislabel some systems that are actually EMULATED as SLOW. When we get support for delegating misaligned access traps to the kernel (as opposed to the firmware quietly handling it), we can explicitly test in Linux to see if unaligned accesses trap. Those systems will start to report EMULATED, though older (today's) systems without that new SBI mechanism will continue to report SLOW. I've updated the documentation for those hwprobe values to reflect this, specifically: SLOW may or may not be emulated by software, and FAST represents means being faster than equivalent byte accesses. The change in documentation is accurate with respect to both the former and current behavior. Signed-off-by: Evan Green <evan@rivosinc.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230818194136.4084400-2-evan@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-09-01Merge tag 'riscv-for-linus-6.6-mw1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the new "riscv,isa-extensions" and "riscv,isa-base" device tree interfaces for probing extensions - Support for userspace access to the performance counters - Support for more instructions in kprobes - Crash kernels can be allocated above 4GiB - Support for KCFI - Support for ELFs in !MMU configurations - ARCH_KMALLOC_MINALIGN has been reduced to 8 - mmap() defaults to sv48-sized addresses, with longer addresses hidden behind a hint (similar to Arm and Intel) - Also various fixes and cleanups * tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V riscv: support PREEMPT_DYNAMIC with static keys riscv: Move create_tmp_mapping() to init sections riscv: Mark KASAN tmp* page tables variables as static riscv: mm: use bitmap_zero() API riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B riscv: remove redundant mv instructions RISC-V: mm: Document mmap changes RISC-V: mm: Update pgtable comment documentation RISC-V: mm: Add tests for RISC-V mm RISC-V: mm: Restrict address space for sv39,sv48,sv57 riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent riscv: allow kmalloc() caches aligned to the smallest value riscv: support the elf-fdpic binfmt loader binfmt_elf_fdpic: support 64-bit systems riscv: Allow CONFIG_CFI_CLANG to be selected riscv/purgatory: Disable CFI riscv: Add CFI error handling riscv: Add ftrace_stub_graph riscv: Add types to indirectly called assembly functions ...
2023-09-01kunit: test: Make filter strings in executor_test writableDavid Gow
KUnit's attribute filtering feature needs the filter strings passed in to be writable, as it modifies them in-place during parsing. This works for the filters passed on the kernel command line, but the string literals used in the executor tests are at least theoretically read-only (though they work on x86_64 for some reason). s390 wasn't fooled, and crashed when these tests were run. Use a 'char[]' instead, (and make an explicit variable for the current filter in parse_filter_attr_test), which will store the string in a writable segment. Fixes: 76066f93f1df ("kunit: add tests for filtering attributes") Closes: https://lore.kernel.org/linux-kselftest/55950256-c00a-4d21-a2c0-cf9f0e5b8a9a@roeck-us.net/ Signed-off-by: David Gow <davidgow@google.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Rae Moar <rmoar@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-01Merge tag 'csky-for-linus-6.6-2' of https://github.com/c-sky/csky-linuxLinus Torvalds
Pull arch/csky fix from Guo Ren: - Fix compile error by missing header file * tag 'csky-for-linus-6.6-2' of https://github.com/c-sky/csky-linux: csky: Fixup compile error
2023-09-01null_blk: fix poll request timeout handlingChengming Zhou
When doing io_uring benchmark on /dev/nullb0, it's easy to crash the kernel if poll requests timeout triggered, as reported by David. [1] BUG: kernel NULL pointer dereference, address: 0000000000000008 Workqueue: kblockd blk_mq_timeout_work RIP: 0010:null_timeout_rq+0x4e/0x91 Call Trace: ? null_timeout_rq+0x4e/0x91 blk_mq_handle_expired+0x31/0x4b bt_iter+0x68/0x84 ? bt_tags_iter+0x81/0x81 __sbitmap_for_each_set.constprop.0+0xb0/0xf2 ? __blk_mq_complete_request_remote+0xf/0xf bt_for_each+0x46/0x64 ? __blk_mq_complete_request_remote+0xf/0xf ? percpu_ref_get_many+0xc/0x2a blk_mq_queue_tag_busy_iter+0x14d/0x18e blk_mq_timeout_work+0x95/0x127 process_one_work+0x185/0x263 worker_thread+0x1b5/0x227 This is indeed a race problem between null_timeout_rq() and null_poll(). null_poll() null_timeout_rq() spin_lock(&nq->poll_lock) list_splice_init(&nq->poll_list, &list) spin_unlock(&nq->poll_lock) while (!list_empty(&list)) req = list_first_entry() list_del_init() ... blk_mq_add_to_batch() // req->rq_next = NULL spin_lock(&nq->poll_lock) // rq->queuelist->next == NULL list_del_init(&rq->queuelist) spin_unlock(&nq->poll_lock) Fix these problems by setting requests state to MQ_RQ_COMPLETE under nq->poll_lock protection, in which null_timeout_rq() can safely detect this race and early return. Note this patch just fix the kernel panic when request timeout happen. [1] https://lore.kernel.org/all/3893581.1691785261@warthog.procyon.org.uk/ Fixes: 0a593fbbc245 ("null_blk: poll queue support") Reported-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Link: https://lore.kernel.org/r/20230901120306.170520-2-chengming.zhou@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-01docs/bpf: Fix "file doesn't exist" warnings in {llvm_reloc,btf}.rstEduard Zingerman
scripts/documentation-file-ref-check reports warnings for (valid) cross-links of form: :ref:`Documentation/bpf/btf <BTF_Ext_Section>` Adding extension to the file name helps to avoid the warning, e.g: :ref:`Documentation/bpf/btf.rst <BTF_Ext_Section>` Fixes: be4033d36070 ("docs/bpf: Add description for CO-RE relocations") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Closes: https://lore.kernel.org/oe-kbuild-all/202309010804.G3MpXo59-lkp@intel.com Link: https://lore.kernel.org/bpf/20230901125935.487972-1-eddyz87@gmail.com
2023-09-01io_uring: fix IO hang in io_wq_put_and_exit from do_exit()Ming Lei
io_wq_put_and_exit() is called from do_exit(), but all FIXED_FILE requests in io_wq aren't canceled in io_uring_cancel_generic() called from do_exit(). Meantime io_wq IO code path may share resource with normal iopoll code path. So if any HIPRI request is submittd via io_wq, this request may not get resouce for moving on, given iopoll isn't possible in io_wq_put_and_exit(). The issue can be triggered when terminating 't/io_uring -n4 /dev/nullb0' with default null_blk parameters. Fix it by always cancelling all requests in io_wq by adding helper of io_uring_cancel_wq(), and this way is reasonable because io_wq destroying follows canceling requests immediately. Closes: https://lore.kernel.org/linux-block/3893581.1691785261@warthog.procyon.org.uk/ Reported-by: David Howells <dhowells@redhat.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230901134916.2415386-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-01s390/dasd: fix string length handlingHeiko Carstens
Building dasd_eckd.o with latest clang reveals this bug: CC drivers/s390/block/dasd_eckd.o drivers/s390/block/dasd_eckd.c:1082:3: warning: 'snprintf' will always be truncated; specified size is 1, but format string expands to at least 11 [-Wfortify-source] 1082 | snprintf(print_uid, sizeof(*print_uid), | ^ drivers/s390/block/dasd_eckd.c:1087:3: warning: 'snprintf' will always be truncated; specified size is 1, but format string expands to at least 10 [-Wfortify-source] 1087 | snprintf(print_uid, sizeof(*print_uid), | ^ Fix this by moving and using the existing UID_STRLEN for the arrays that are being written to. Also rename UID_STRLEN to DASD_UID_STRLEN to clarify its scope. Fixes: 23596961b437 ("s390/dasd: split up dasd_eckd_read_conf") Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> # build Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://github.com/ClangBuiltLinux/linux/issues/1923 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20230828153142.2843753-2-hca@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-09-01ASoC: Name iov_iter argument as iterator instead of bufferTakashi Iwai
While transitioning ASoC code for iov_iter usages, I kept the argument name as "buf" as the original code. But, iov_iter is an iterator, and using the name "buf" may be misleading: the crucial difference is that iov_iter can be proceeded after the operation, hence it can't be passed twice, while a simple "buffer" sounds as if reusable. To make the usage clearer, rename the argument from "buf" to "iter". There is no functional changes, just names. Fixes: 66201cacc33d ("ASoC: component: Add generic PCM copy ops") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/CAHk-=wje+VkXjjfVTmK-uJdG_M5=ar14QxAwK+XDiq07k_pzBg@mail.gmail.com Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230831130457.8180-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-09-01ASoC: dmaengine: Drop unused iov_iter for process callbackTakashi Iwai
Passing the iov_iter to the process callback is rather buggy, as the iterator has been already processed for playback. Similarly, it makes the copy for capture buggy after the process callback reading the iterator out. Moreover, all existing process callbacks don't refer to the passed iterator at all. So, it's better to drop the argument from the process callback. Fixes: 9bebd65443c1 ("ASoC: dmaengine: Use iov_iter for process callback, too") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/CAHk-=wje+VkXjjfVTmK-uJdG_M5=ar14QxAwK+XDiq07k_pzBg@mail.gmail.com Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230831130457.8180-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-09-01drm/amd: Make fence wait in suballocator uninterruptibleSimon Pilkington
Commit c103a23f2f29 ("drm/amd: Convert amdgpu to use suballocation helper.") made the fence wait in amdgpu_sa_bo_new() interruptible but there is no code to handle an interrupt. This caused the kernel to randomly explode in high-VRAM-pressure situations so make it uninterruptible again. Signed-off-by: Simon Pilkington <simonp.git@gmail.com> Fixes: c103a23f2f29 ("drm/amd: Convert amdgpu to use suballocation helper.") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2761 CC: stable@vger.kernel.org # 6.4+
2023-09-01media: cec: core: add note about *_from_edid() function usage in drmJani Nikula
In the drm subsystem, the source physical address is, in most cases, available without having to parse the EDID again. Add notes about preferring to use the pre-parsed address instead. Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: linux-media@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20230831105144.25923-1-jani.nikula@intel.com
2023-09-01selftests/bpf: Fix a CI failure caused by vsock writeXu Kuohai
While commit 90f0074cd9f9 ("selftests/bpf: fix a CI failure caused by vsock sockmap test") fixes a receive failure of vsock sockmap test, there is still a write failure: Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir ./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1501 ./test_progs:vsock_unix_redir_connectible:1501: ingress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1501 ./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected vsock_unix_redir_connectible:FAIL:1501 The reason is that the vsock connection in the test is set to ESTABLISHED state by function virtio_transport_recv_pkt, which is executed in a workqueue thread, so when the user space test thread runs before the workqueue thread, this problem occurs. To fix it, before writing the connection, wait for it to be connected. Fixes: d61bd8c1fd02 ("selftests/bpf: add a test case for vsock sockmap") Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230901031037.3314007-1-xukuohai@huaweicloud.com
2023-09-01drm/i915/cec: switch to setting physical address directlyJani Nikula
Avoid parsing the EDID again for source physical address. Also gets rids of a few remaining raw EDID usages. Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: linux-media@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/01a90c82c8a4f2fd945e0181ffeaca595928d19e.1692884619.git.jani.nikula@intel.com
2023-09-01drm/cec: add drm_dp_cec_attach() as the non-edid version of set edidJani Nikula
Connectors have source physical address available in display info. There's no need to parse the EDID again for this. Add drm_dp_cec_attach() to do this. Seems like the set_edid/unset_edid naming is a bit specific now that there's no need to pass the EDID at all, so aim for attach/detach going forward. v2: Fix the embarrashing build failures Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: linux-media@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230825130120.1250089-1-jani.nikula@intel.com
2023-09-01drm/edid: parse source physical addressJani Nikula
CEC needs the source physical address. Parsing it is trivial with the existing EDID CEA DB infrastructure. Default to CEC_PHYS_ADDR_INVALID (0xffff) instead of 0 to cater for easier CEC usage. Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: linux-media@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/8c6b6403932536b6849e0b44e1ee6e7ebdbe4a69.1692884619.git.jani.nikula@intel.com
2023-09-01drm/i915/display: use drm_edid_is_digital()Jani Nikula
Reduce the use of struct edid and drm_edid_raw(). Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/dbc0269d34f3140aff410eefae8a2711c59299b3.1692884619.git.jani.nikula@intel.com
2023-09-01drm/edid: add drm_edid_is_digital()Jani Nikula
Checking edid->input & DRM_EDID_INPUT_DIGITAL is common enough to deserve a helper that also lets us abstract the raw EDID a bit better. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/4bdb407bf189fd922be022eb2f9564692377c81d.1692884619.git.jani.nikula@intel.com
2023-09-01drm/i915/hdcp: Use correct aux for capability check scenarioSuraj Kandpal
Send the correct aux rather than the one derived from intel_digital_port so that the HDCP version of both monitors are fetched rather than just the primary one's Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230830073437.666263-3-suraj.kandpal@intel.com
2023-09-01drm/i915/hdcp: Use intel_connector as argument for hdcp_2_2_capableSuraj Kandpal
Use intel_connector as argument instead of intel_digital_port in hdcp_2_2_capable function and dig_port can be later derived from connector. This will help with getting the correct hdcp version of particular monitor in a MST setup. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230830073437.666263-2-suraj.kandpal@intel.com
2023-09-01kconfig: add warn-unknown-symbols sanity checkSergey Senozhatsky
Introduce KCONFIG_WARN_UNKNOWN_SYMBOLS environment variable, which makes Kconfig warn about unknown config symbols. This is especially useful for continuous kernel uprevs when some symbols can be either removed or renamed between kernel releases (which can go unnoticed otherwise). By default KCONFIG_WARN_UNKNOWN_SYMBOLS generates warnings, which are non-terminal. There is an additional environment variable KCONFIG_WERROR that overrides this behaviour and turns warnings into errors. Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-09-01kbuild: dummy-tools: make MPROFILE_KERNEL checks work on BEJiri Slaby
Commit 2eab791f940b ("kbuild: dummy-tools: support MPROFILE_KERNEL checks for ppc") added support for ppc64le's checks for -mprofile-kernel. Now, commit aec0ba7472a7 ("powerpc/64: Use -mprofile-kernel for big endian ELFv2 kernels") added support for -mprofile-kernel even on big-endian ppc. So lift the check in gcc-check-mprofile-kernel.sh to support big-endian too. Fixes: aec0ba7472a7 ("powerpc/64: Use -mprofile-kernel for big endian ELFv2 kernels") Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-09-01sfc: check for zero length in EF10 RX prefixEdward Cree
When EF10 RXDP firmware is operating in cut-through mode, packet length is not known at the time the RX prefix is generated, so it is left as zero and RX event merging is inhibited to ensure that the length is available in the RX event. However, it has been found that in certain circumstances the RX events for these packets still get merged, meaning the driver cannot read the length from the RX event, and tries to use the length from the prefix. The resulting zero-length SKBs cause crashes in GRO since commit 1d11fa696733 ("net-gro: remove GRO_DROP"), so add a check to the driver to detect these zero-length RX events and discard the packet. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01Merge branch 'dst-hint-multipath'David S. Miller
Sriram Yagnaraman says: ==================== Avoid TCP resets when using ECMP for load-balancing between multiple servers. All packets in the same flow (L3/L4 depending on multipath hash policy) should be directed to the same target, but after [0]/[1] we see stray packets directed towards other targets. This, for instance, causes RST to be sent on TCP connections. The first two patches solve the problem by ignoring route hints for destinations that are part of multipath group, by using new SKB flags for IPv4 and IPv6. The third patch is a selftest that tests the scenario. Thanks to Ido, for reviewing and suggesting a way forward in [2] and also suggesting how to write a selftest for this. v4->v5: - Fixed review comments from Ido v3->v4: - Remove single path test - Rebase to latest v2->v3: - Add NULL check for skb in fib6_select_path (Ido Schimmel) - Use fib_tests.sh for selftest instead of the forwarding suite (Ido Schimmel) v1->v2: - Update to commit messages describing the solution (Ido Schimmel) - Use perf stat to count fib table lookups in selftest (Ido Schimmel) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01selftests: fib_tests: Add multipath list receive testsSriram Yagnaraman
The test uses perf stat to count the number of fib:fib_table_lookup tracepoint hits for IPv4 and the number of fib6:fib6_table_lookup for IPv6. The measured count is checked to be within 5% of the total number of packets sent via veth1. Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01ipv6: ignore dst hint for multipath routesSriram Yagnaraman
Route hints when the nexthop is part of a multipath group causes packets in the same receive batch to be sent to the same nexthop irrespective of the multipath hash of the packet. So, do not extract route hint for packets whose destination is part of a multipath group. A new SKB flag IP6SKB_MULTIPATH is introduced for this purpose, set the flag when route is looked up in fib6_select_path() and use it in ip6_can_use_hint() to check for the existence of the flag. Fixes: 197dbf24e360 ("ipv6: introduce and uses route look hints for list input.") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01ipv4: ignore dst hint for multipath routesSriram Yagnaraman
Route hints when the nexthop is part of a multipath group causes packets in the same receive batch to be sent to the same nexthop irrespective of the multipath hash of the packet. So, do not extract route hint for packets whose destination is part of a multipath group. A new SKB flag IPSKB_MULTIPATH is introduced for this purpose, set the flag when route is looked up in ip_mkroute_input() and use it in ip_extract_route_hint() to check for the existence of the flag. Fixes: 02b24941619f ("ipv4: use dst hint for ipv4 list receive") Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01skbuff: skb_segment, Call zero copy functions before using skbuff fragsMohamed Khalfella
Commit bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb") added the call to zero copy functions in skb_segment(). The change introduced a bug in skb_segment() because skb_orphan_frags() may possibly change the number of fragments or allocate new fragments altogether leaving nrfrags and frag to point to the old values. This can cause a panic with stacktrace like the one below. [ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc [ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26 [ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0 [ 194.021892] Call Trace: [ 194.027422] <TASK> [ 194.072861] tcp_gso_segment+0x107/0x540 [ 194.082031] inet_gso_segment+0x15c/0x3d0 [ 194.090783] skb_mac_gso_segment+0x9f/0x110 [ 194.095016] __skb_gso_segment+0xc1/0x190 [ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem] [ 194.107071] dev_qdisc_enqueue+0x16/0x70 [ 194.110884] __dev_queue_xmit+0x63b/0xb30 [ 194.121670] bond_start_xmit+0x159/0x380 [bonding] [ 194.128506] dev_hard_start_xmit+0xc3/0x1e0 [ 194.131787] __dev_queue_xmit+0x8a0/0xb30 [ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan] [ 194.141477] dev_hard_start_xmit+0xc3/0x1e0 [ 194.144622] sch_direct_xmit+0xe3/0x280 [ 194.147748] __dev_queue_xmit+0x54a/0xb30 [ 194.154131] tap_get_user+0x2a8/0x9c0 [tap] [ 194.157358] tap_sendmsg+0x52/0x8e0 [tap] [ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net] [ 194.173631] handle_tx+0xcd/0xe0 [vhost_net] [ 194.176959] vhost_worker+0x76/0xb0 [vhost] [ 194.183667] kthread+0x118/0x140 [ 194.190358] ret_from_fork+0x1f/0x30 [ 194.193670] </TASK> In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags local variable in skb_segment() stale. This resulted in the code hitting i >= nrfrags prematurely and trying to move to next frag_skb using list_skb pointer, which was NULL, and caused kernel panic. Move the call to zero copy functions before using frags and nr_frags. Fixes: bf5c25d60861 ("skbuff: in skb_segment, call zerocopy functions once per nskb") Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Reported-by: Amit Goyal <agoyal@purestorage.com> Cc: stable@vger.kernel.org Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01Documentation/llvm: refresh docsNick Desaulniers
Recent fixes for an embargoed hardware security vulnerability failed to link with ld.lld (LLVM's linker). [0] To be fair, our documentation mentions ``CC=clang`` foremost with ``LLVM=1`` being buried "below the fold." We want to encourage the use of ``LLVM=1`` rather than just ``CC=clang``. Make that suggestion "above the fold" and "front and center" in our docs. While here, the following additional changes were made: - remove the bit about CROSS_COMPILE setting --target=, that's no longer true. - Add ARCH=loongarch to the list of maintained targets (though we're still working on getting defconfig building cleanly at the moment; we're pretty close). - Bump ARCH=powerpc from CC=clang to LLVM=1 status. - Promote ARCH=riscv from being Maintained to being Supported. Android is working towards supporting RISC-V, and we have excellent support from multiple companies in this regard. - Note that the toolchain distribution on kernel.org has been built with profile data from kernel builds. - Note how to use ccache with clang. Link: https://github.com/ClangBuiltLinux/linux/issues/1907 [0] Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-09-01modpost: Skip .llvm.call-graph-profile section checkDenis Nikitin
.llvm.call-graph-profile section is added by clang when the kernel is built with profiles (e.g. -fprofile-sample-use= or -fprofile-use=). Note that .llvm.call-graph-profile intentionally uses REL relocations to decrease the object size, for more details see https://reviews.llvm.org/D104080. The section contains edge information derived from text sections, so .llvm.call-graph-profile itself doesn't need more analysis as the text sections have been analyzed. This change fixes the kernel build with clang and a sample profile which currently fails with: "FATAL: modpost: Please add code to calculate addend for this architecture" Signed-off-by: Denis Nikitin <denik@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Fangrui Song <maskray@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-09-01kbuild: support modules_sign for external modules as wellMasahiro Yamada
The modules_sign target is currently only available for in-tree modules, but it actually works for external modules as well. Move the modules_sign rule to the common part. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-09-01kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=nMasahiro Yamada
Commit d890f510c8e4 ("MODSIGN: Add modules_sign make target") introduced 'make modules_sign' to manually sign modules. Some time later, commit d9d8d7ed498e ("MODSIGN: Add option to not sign modules during modules_install") introduced CONFIG_MODULE_SIG_ALL. If it was disabled, mod_sign_cmd was set to no-op ('true' command). It affected not only 'make modules_install' but also 'make modules_sign'. With CONFIG_MODULE_SIG_ALL=n, neither modules_install nor modules_sign is able to sign modules. Kbuild has kept that behavior, and nobody has complained about it, but I think it is weird. CONFIG_MODULE_SIG_ALL=n should turn off signing only for modules_install. If users want to sign modules manually, modules_sign should be offered. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-09-01kbuild: move more module installation code to scripts/Makefile.modinstMasahiro Yamada
Move more relevant code to scripts/Makefile.modinst. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-09-01kbuild: reduce the number of mkdir calls during modules_installMasahiro Yamada
Calling 'mkdir' for every module results in redundant syscalls. Use $(sort ...) to drop the duplicated directories. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2023-09-01drm/debugfs: rework drm_debugfs_create_files implementation v2Christian König
Use managed memory allocation for this. That allows us to not keep track of all the files any more. v2: keep drm_debugfs_cleanup(), but rename to drm_debugfs_unregister(), we still need to cleanup the symlink Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-6-christian.koenig@amd.com Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
2023-09-01drm/debugfs: remove dev->debugfs_list and debugfs_mutex v2Christian König
The mutex was completely pointless in the first place since any parallel adding of files to this list would result in random behavior since the list is filled and consumed multiple times. Completely drop that approach and just create the files directly but return -ENODEV while opening the file when the minors are not registered yet. v2: rebase on debugfs directory rework, limit access before minors are registered. Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-5-christian.koenig@amd.com Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
2023-09-01drm/debugfs: rework debugfs directory creation v5Christian König
Instead of the per minor directories only create a single debugfs directory for the whole device directly when the device is initialized. For DRM devices each minor gets a symlink to the per device directory for now until we can be sure that this isn't useful any more in any way. Accel devices create only the per device directory and also drops the mid layer callback to create driver specific files. v2: cleanup accel component as well v3: fix typo when debugfs is disabled v4: call drm_debugfs_dev_fini() during release as well, some kerneldoc typos fixed v5: rebased and one more kerneldoc fix Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829110115.3442-4-christian.koenig@amd.com Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
2023-09-01Merge branch 'net-data-race-annotations'David S. Miller
Eric Dumazet says: ==================== net: another round of data-race annotations Series inspired by some syzbot reports, taking care of 4 socket fields that can be read locklessly. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01net: annotate data-races around sk->sk_bind_phcEric Dumazet
sk->sk_bind_phc is read locklessly. Add corresponding annotations. Fixes: d463126e23f1 ("net: sock: extend SO_TIMESTAMPING for PHC binding") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01net: annotate data-races around sk->sk_tsflagsEric Dumazet
sk->sk_tsflags can be read locklessly, add corresponding annotations. Fixes: b9f40e21ef42 ("net-timestamp: move timestamp flags out of sk_flags") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01mptcp: annotate data-races around msk->rmem_fwd_allocEric Dumazet
msk->rmem_fwd_alloc can be read locklessly. Add mptcp_rmem_fwd_alloc_add(), similar to sk_forward_alloc_add(), and appropriate READ_ONCE()/WRITE_ONCE() annotations. Fixes: 6511882cdd82 ("mptcp: allocate fwd memory separately on the rx and tx path") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01net: annotate data-races around sk->sk_forward_allocEric Dumazet
Every time sk->sk_forward_alloc is read locklessly, add a READ_ONCE(). Add sk_forward_alloc_add() helper to centralize updates, to reduce number of WRITE_ONCE(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-01net: use sk_forward_alloc_get() in sk_get_meminfo()Eric Dumazet
inet_sk_diag_fill() has been changed to use sk_forward_alloc_get(), but sk_get_meminfo() was forgotten. Fixes: 292e6077b040 ("net: introduce sk_forward_alloc_get()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 10:42:22 +0000