summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-14userns: Convert __dev_set_promiscuity to use kuids in audit logsEric W. Biederman
Cc: Klaus Heinrich Kiwi <klausk@br.ibm.com> Cc: Eric Paris <eparis@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-08-14userns: Convert net/core/scm.c to use kuids and kgidsEric W. Biederman
With the existence of kuid_t and kgid_t we can take this further and remove the usage of struct cred altogether, ensuring we don't get cache line misses from reference counts. For now however start simply and do a straight forward conversion I can be certain is correct. In cred_to_ucred use from_kuid_munged and from_kgid_munged as these values are going directly to userspace and we want to use the userspace safe values not -1 when reporting a value that does not map. The earlier conversion that used from_kuid was buggy in that respect. Oops. Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-08-14Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Alexey Khoroshilov provides a potential memory leak in rndis_wlan. Bob Copeland gives us an ath5k fix for a lockdep problem. Dan Carpenter fixes a signedness mismatch in at76c50x. Felix Fietkau corrects a regression caused by an earlier commit that can lead to an IRQ storm. Lorenzo Bianconi offers a fix for a bad variable initialization in ath9k that can cause it to improperly mark decrypted frames. Rajkumar Manoharan fixes ath9k to prevent the btcoex time from running when the hardware is asleep. The remainder are Bluetooth fixes, about which Gustavo says: "Here goes some fixes for 3.6-rc1, there are a few fix to thte inquiry code by Ram Malovany, support for 2 new devices, and few others fixes for NULL dereference, possible deadlock and a memory leak." ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14ipv6: addrconf: Avoid calling netdevice notifiers with RCU read-side lockBen Hutchings
Cong Wang reports that lockdep detected suspicious RCU usage while enabling IPV6 forwarding: [ 1123.310275] =============================== [ 1123.442202] [ INFO: suspicious RCU usage. ] [ 1123.558207] 3.6.0-rc1+ #109 Not tainted [ 1123.665204] ------------------------------- [ 1123.768254] include/linux/rcupdate.h:430 Illegal context switch in RCU read-side critical section! [ 1123.992320] [ 1123.992320] other info that might help us debug this: [ 1123.992320] [ 1124.307382] [ 1124.307382] rcu_scheduler_active = 1, debug_locks = 0 [ 1124.522220] 2 locks held by sysctl/5710: [ 1124.648364] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81768498>] rtnl_trylock+0x15/0x17 [ 1124.882211] #1: (rcu_read_lock){.+.+.+}, at: [<ffffffff81871df8>] rcu_lock_acquire+0x0/0x29 [ 1125.085209] [ 1125.085209] stack backtrace: [ 1125.332213] Pid: 5710, comm: sysctl Not tainted 3.6.0-rc1+ #109 [ 1125.441291] Call Trace: [ 1125.545281] [<ffffffff8109d915>] lockdep_rcu_suspicious+0x109/0x112 [ 1125.667212] [<ffffffff8107c240>] rcu_preempt_sleep_check+0x45/0x47 [ 1125.781838] [<ffffffff8107c260>] __might_sleep+0x1e/0x19b [...] [ 1127.445223] [<ffffffff81757ac5>] call_netdevice_notifiers+0x4a/0x4f [...] [ 1127.772188] [<ffffffff8175e125>] dev_disable_lro+0x32/0x6b [ 1127.885174] [<ffffffff81872d26>] dev_forward_change+0x30/0xcb [ 1128.013214] [<ffffffff818738c4>] addrconf_forward_change+0x85/0xc5 [...] addrconf_forward_change() uses RCU iteration over the netdev list, which is unnecessary since it already holds the RTNL lock. We also cannot reasonably require netdevice notifier functions not to sleep. Reported-by: Cong Wang <amwang@redhat.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14drivers/net/ethernet/mellanox/mlx4/mcg.c: fix error return codeJulia Lawall
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14drivers/net/ethernet/freescale/fs_enet: fix error return codeJulia Lawall
Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14drivers/net/ethernet/ti/davinci_cpdma.c: Remove potential NULL dereferenceJulia Lawall
If the NULL test is necessary, the initialization involving a dereference of the tested value should be moved after the NULL test. The sematic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14packet: Report socket mclist info via diag modulePavel Emelyanov
The info is reported as an array of packet_diag_mclist structures. Each includes not only the directly configured values (index, type, etc), but also the "count". Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14packet: Report more packet sk info via diag modulePavel Emelyanov
This reports in one rtattr message all the other scalar values, that can be set on a packet socket with setsockopt. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14packet: Diag core and basic socket info dumpingPavel Emelyanov
The diag module can be built independently from the af_packet.ko one, just like it's done in unix sockets. The core dumping message carries the info available at socket creation time, i.e. family, type and protocol (in the same byte order as shown in the proc file). The socket inode number and cookie is reserved for future per-socket info retrieving. The per-protocol filtering is also reserved for future by requiring the sdiag_protocol to be zero. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14packet: Introduce net/packet/internal.h headerPavel Emelyanov
The diag module will need to access some private packet_sock data, so move it to a header in advance. This file will be shared between the af_packet.c and the diag.c Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14staging: csr: add INET dependancyGreg Kroah-Hartman
Randy noticed that with CONFIG_INET turned off, the following build errors happen: ERROR: "register_inetaddr_notifier" [drivers/staging/csr/csr_wifi.ko] undefined! ERROR: "unregister_inetaddr_notifier" [drivers/staging/csr/csr_wifi.ko] undefined! Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-14staging: comedi: Fix reversed test in comedi_device_attach()Ian Abbott
Commit 3902a370281d2f2b130f141e8cf94eab40125769 (staging: comedi: refactor comedi_device_attach() a bit) by yours truly introduced an inverted logic bug in comedi_device_attach() for the case where the driver expects the device to be configured by driver name rather than board name. The result of a strcmp() is being tested incorrectly. Fix it. Thanks to Stephen N Chivers for discovering the bug and suggesting the fix. Cc: <stable@vger.kernel.org> # 3.5.x Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-14llc: Fix races between llc2 handler use and (un)registrationBen Hutchings
When registering the handlers, any state they rely on must be completely initialised first. When unregistering, we must wait until they are definitely no longer running. llc_rcv() must also avoid reading the handler pointers again after checking for NULL. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14llc2: Call llc_station_exit() on llc2_init() failure pathBen Hutchings
Otherwise the station packet handler will remain registered even though the module is unloaded. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14llc2: Fix silent failure of llc_station_init()Ben Hutchings
llc_station_init() creates and processes an event skb with no effect other than to change the state from DOWN to UP. Allocation failure is reported, but then ignored by its caller, llc2_init(). Remove this possibility by simply initialising the state as UP. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14IB/ipoib: Fix RCU pointer dereference of wrong objectShlomo Pongratz
Commit b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") introduced a bug where in ipoib_neigh_free() (which is called from a few errors flows in the driver), rcu_dereference() is invoked with the wrong pointer object, which results in a crash. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-08-14IB/ipoib: Add missing locking when CM object is deletedShlomo Pongratz
Commit b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") introduced a bug where in ipoib_cm_destroy_tx() a CM object is moved between lists without any supported locking. Under a stress test, this eventually leads to list corruption and a crash. Previously when this routine was called, callers were taking the device priv lock. Currently this function is called from the RCU callback associated with neighbour deletion. Fix the race by taking the same lock we used to before. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-08-14net: ipv4: fib_trie: Don't unnecessarily search for already found fib leafIgor Maravic
We've already found leaf, don't search for it again. Same is for fib leaf info. Signed-off-by: Igor Maravic <igorm@etf.rs> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14Replace rwlock on xfrm_policy_afinfo with rcuPriyanka Jain
xfrm_policy_afinfo is read mosly data structure. Write on xfrm_policy_afinfo is done only at the time of configuration. So rwlocks can be safely replaced with RCU. RCUs usage optimizes the performance. Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: ipv6: proc: Fix error handlingIgor Maravic
Fix error handling in case making of dir dev_snmp6 failes Signed-off-by: Igor Maravic <igorm@etf.rs> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14ipv4: Cache local output routesYan, Zheng
Commit caacf05e5ad1abf causes big drop of UDP loop back performance. The cause of the regression is that we do not cache the local output routes. Each time we send a datagram from unconnected UDP socket, the kernel allocates a dst_entry and adds it to the rt_uncached_list. It creates lock contention on the rt_uncached_lock. Reported-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: sierra_net: replace whitelist with ifnumber matchBjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: qmi_wwan: compress device_id list using macrosBjørn Mork
Take advantage of the matching macros to make the device id list easier to read and maintain. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: qmi_wwan: add Sierra Wireless devicesBjørn Mork
Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: qmi_wwan: use fixed interface number matchingBjørn Mork
This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netconsole.txt: revision of examples for the receiver of kernel messagesDirk Gouders
There are at least 4 implementations of netcat with the BSD-based being the only one that has to be used without the -p switch to specify the listening port. Jan Engelhardt suggested to add an example for socat(1). Signed-off-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: re-enable irq in poll_napi()Amerigo Wang
napi->poll() needs IRQ enabled, so we have to re-enable IRQ before calling it. Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: handle vlan tags in netpoll tx and rx pathAmerigo Wang
Without this patch, I can't get netconsole logs remotely over vlan. The reason is probably we don't handle vlan tags in either netpoll tx or rx path. I am not sure if I use these vlan functions correctly, at least this patch works. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14vlan: clean up vlan_dev_hard_start_xmit()Amerigo Wang
Clean up vlan_dev_hard_start_xmit() function. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14vlan: clean up some variable namesAmerigo Wang
To be consistent, s/info/vlan/. Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Patrick McHardy <kaber@trash.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: convert several functions to boolAmerigo Wang
These functions are just boolean, let them return bool instead of int. Cc: David Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: check netpoll tx status on the right deviceAmerigo Wang
Although this doesn't matter actually, because netpoll_tx_running() doesn't use the parameter, the code will be more readable. For team_dev_queue_xmit() we have to move it down to avoid compile errors. Cc: David Miller <davem@davemloft.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14bridge: use list_for_each_entry() in netpoll functionsAmerigo Wang
We don't delete 'p' from the list in the loop, so we can just use list_for_each_entry(). Cc: David Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14bridge: add some comments for NETDEV_RELEASEAmerigo Wang
Add comments on why we don't notify NETDEV_RELEASE. Cc: David Miller <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: take rcu_read_lock_bh() in netpoll_send_skb_on_dev()Amerigo Wang
This patch fixes several problems in the call path of netpoll_send_skb_on_dev(): 1. Disable IRQ's before calling netpoll_send_skb_on_dev(). 2. All the callees of netpoll_send_skb_on_dev() should use rcu_dereference_bh() to dereference ->npinfo. 3. Rename arp_reply() to netpoll_arp_reply(), the former is too generic. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: use netpoll_rx_on() in netpoll_rx()Amerigo Wang
The logic of the code is same, just call netpoll_rx_on(). Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: take rcu_read_lock_bh() in netpoll_rx()Amerigo Wang
In __netpoll_rx(), it dereferences ->npinfo without rcu_dereference_bh(), this patch fixes it by using the 'npinfo' passed from netpoll_rx() where it is already dereferenced with rcu_dereference_bh(). Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netconsole: do not release spin_lock when calling __netpoll_cleanupAmerigo Wang
With the previous patch applied, __netpoll_cleanup() is non-block now, so we don't need to release the spin_lock before calling it. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: make __netpoll_cleanup non-blockAmerigo Wang
Like the previous patch, slave_disable_netpoll() and __netpoll_cleanup() may be called with read_lock() held too, so we should make them non-block, by moving the cleanup and kfree() to call_rcu_bh() callbacks. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup()Amerigo Wang
slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14gre: Support GRE over IPv6xeb@mail.ru
GRE over IPv6 implementation. Signed-off-by: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: remove netdev_bonding_change()Amerigo Wang
I don't see any benifits to use netdev_bonding_change() than using call_netdevice_notifiers() directly. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14net: move and rename netif_notify_peers()Amerigo Wang
I believe net/core/dev.c is a better place for netif_notify_peers(), because other net event notify functions also stay in this file. And rename it to netdev_notify_peers(). Cc: David S. Miller <davem@davemloft.net> Cc: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-08-14Revert "x86-64/efi: Use EFI to deal with platform wall clock"H. Peter Anvin
This reverts commit bacef661acdb634170a8faddbc1cf28e8f8b9eee. This commit has been found to cause serious regressions on a number of ASUS machines at the least. We probably need to provide a 1:1 map in addition to the EFI virtual memory map in order for this to work. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Reported-and-bisected-by: Jérôme Carretero <cJ-ko@zougloub.eu> Cc: Jan Beulich <jbeulich@suse.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120805172903.5f8bb24c@zougloub.eu
2012-08-14x86, apic: fix broken legacy interrupts in the logical apic modeSuresh Siddha
Recent commit 332afa656e76458ee9cf0f0d123016a0658539e4 cleaned up a workaround that updates irq_cfg domain for legacy irq's that are handled by the IO-APIC. This was assuming that the recent changes in assign_irq_vector() were sufficient to remove the workaround. But this broke couple of AMD platforms. One of them seems to be sending interrupts to the offline cpu's, resulting in spurious "No irq handler for vector xx (irq -1)" messages when those cpu's come online. And the other platform seems to always send the interrupt to the last logical CPU (cpu-7). Recent changes had an unintended side effect of using only logical cpu-0 in the IO-APIC RTE (during boot for the legacy interrupts) and this broke the legacy interrupts not getting routed to the cpu-7 on the AMD platform, resulting in a boot hang. For now, reintroduce the removed workaround, (essentially not allowing the vector to change for legacy irq's when io-apic starts to handle the irq. Which also addressed the uninteded sife effect of just specifying cpu-0 in the IO-APIC RTE for those irq's during boot). Reported-and-tested-by: Robert Richter <robert.richter@amd.com> Reported-and-tested-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1344453412.29170.5.camel@sbsiddha-desk.sc.intel.com Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-08-14ALSA: lx6464es: Add a missing error checkTakashi Iwai
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44541 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-14netfilter: ctnetlink: fix missing locking while changing conntrack from nfqueuePablo Neira Ayuso
Since 9cb017665 netfilter: add glue code to integrate nfnetlink_queue and ctnetlink, we can modify the conntrack entry via nfnl_queue. However, the change of the conntrack entry via nfnetlink_queue requires appropriate locking to avoid concurrent updates. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2012-08-14ALSA: hda - Fix 'Beep Playback Switch' with no underlying mute switchDavid Henningsson
Some Conexant devices (e g CX20590) have no mute capability on their Beep widgets. This patch makes sure we don't try setting mutes on those widgets. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-14 07:00:30 +0000