| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
- Add ':' to getopt option 'trace-buffer-size' in timerlat_hist for
consistency
- Remove unused sched_getattr define
- Rename sched_setattr() helper to syscall_sched_setattr() to avoid
conflicts
- Update counters to long from int to avoid overflow
- Add libcpupower dependency detection
- Add --deepest-idle-state to timerlat to limit deep idle sleeps
- Other minor clean ups and documentation changes
* tag 'trace-tools-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
verification/dot2: Improve dot parser robustness
tools/rtla: Improve exception handling in timerlat_load.py
tools/rtla: Enhance argument parsing in timerlat_load.py
tools/rtla: Improve code readability in timerlat_load.py
rtla/timerlat: Do not set params->user_workload with -U
rtla: Documentation: Mention --deepest-idle-state
rtla/timerlat: Add --deepest-idle-state for hist
rtla/timerlat: Add --deepest-idle-state for top
rtla/utils: Add idle state disabling via libcpupower
rtla: Add optional dependency on libcpupower
tools/build: Add libcpupower dependency detection
rtla/timerlat: Make timerlat_hist_cpu->*_count unsigned long long
rtla/timerlat: Make timerlat_top_cpu->*_count unsigned long long
tools/rtla: fix collision with glibc sched_attr/sched_set_attr
tools/rtla: drop __NR_sched_getattr
rtla: Fix consistency in getopt_long for timerlat_hist
rv: Fix a typo
tools/rv: Correct the grammatical errors in the comments
tools/rv: Correct the grammatical errors in the comments
rtla: use the definition for stdout fd when calling isatty()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace ring-buffer updates from Steven Rostedt:
- Limit time interrupts are disabled in rb_check_pages()
rb_check_pages() is called after the ring buffer size is updated to
make sure that the ring buffer has not been corrupted. Commit
c2274b908db0 ("ring-buffer: Fix a race between readers and resize
checks") fixed a race with the check pages and simultaneous resizes
to the ring buffer by adding a raw_spin_lock_irqsave() around the
check operation. Although this was a simple fix, it would hold
interrupts disabled for non determinative amount of time. This could
harm PREEMPT_RT operations.
Instead, modify the logic by adding a counter when the buffer is
modified and to release the raw_spin_lock() at each iteration. It
checks the counter under the lock to see if a modification happened
during the loop, and if it did, it would restart the loop up to 3
times. After 3 times, it will simply exit the check, as it is
unlikely that would ever happen as buffer resizes are rare
occurrences.
- Replace some open coded str_low_high() with the helper
- Fix some documentation/comments
* tag 'trace-ring-buffer-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Correct a grammatical error in a comment
ring-buffer: Use str_low_high() helper in ring_buffer_producer()
ring-buffer: Reorganize kerneldoc parameter names
ring-buffer: Limit time with disabled interrupts in rb_check_pages()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull tdx updates from Dave Hansen:
"These essentially refine some interactions between TDX guests and
VMMs.
The first leverages a new TDX module feature to runtime disable the
ability for a VM to inject #VE exceptions. Before this feature, there
was only a static on/off switch and the guest had to panic if it was
configured in a bad state.
The second lets the guest opt in to be able to access the topology
CPUID leaves. Before this, accesses to those leaves would #VE.
For both of these, it would have been nicest to just change the
default behavior, but some pesky "other" OSes evidently need to retain
the legacy behavior.
Summary:
- Add new infrastructure for reading TDX metadata
- Use the newly-available metadata to:
- Disable potentially nasty #VE exceptions
- Get more complete CPU topology information from the VMM"
* tag 'x86_tdx_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Enable CPU topology enumeration
x86/tdx: Dynamically disable SEPT violations from causing #VEs
x86/tdx: Rename tdx_parse_tdinfo() to tdx_setup()
x86/tdx: Introduce wrappers to read and write TD metadata
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"As usual for this branch, these are super random: a compile fix for
some newish LLVM checks and making sure a Kconfig text reference to
'RSB' matches the normal definition:
- Rework some CPU setup code to keep LLVM happy on 32-bit
- Correct RSB terminology in Kconfig text"
* tag 'x86_misc_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Make sure flag_is_changeable_p() is always being used
x86/bugs: Correct RSB terminology in Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sgx update from Dave Hansen:
- Use vmalloc_array() instead of vmalloc()
* tag 'x86_sgx_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Use vmalloc_array() instead of vmalloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dave Jiang:
- Constify range_contains() input parameters to prevent changes
- Add support for displaying RCD capabilities in sysfs to support lspci
for CXL device
- Downgrade warning message to debug in cxl_probe_component_regs()
- Add support for adding a printf specifier '%pra' to emit 'struct
range' content:
- Add sanity tests for 'struct resource'
- Add documentation for special case
- Add %pra for 'struct range'
- Add %pra usage in CXL code
- Add preparation code for DCD support:
- Add range_overlaps()
- Add CDAT DSMAS table shared and read only flag in ACPICA
- Add documentation to 'struct dev_dax_range'
- Delay event buffer allocation in CXL PCI code until needed
- Use guard() in cxl_dpa_set_mode()
- Refactor create region code to consolidate common code
* tag 'cxl-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Refactor common create region code
cxl/hdm: Use guard() in cxl_dpa_set_mode()
cxl/pci: Delay event buffer allocation
dax: Document struct dev_dax_range
ACPI/CDAT: Add CDAT/DSMAS shared and read only flag values
range: Add range_overlaps()
cxl/cdat: Use %pra for dpa range outputs
printf: Add print format (%pra) for struct range
Documentation/printf: struct resource add start == end special case
test printf: Add very basic struct resource tests
cxl: downgrade a warning message to debug level in cxl_probe_component_regs()
cxl/pci: Add sysfs attribute for CXL 1.1 device link status
cxl/core/regs: Add rcd_pcie_cap initialization
kernel/range: Const-ify range_contains parameters
|
|
To avoid arch-specific code in general ACPI initialization flow,
introduce a weak symbol acpi_arch_init().
Currently, arm64 and riscv can utillize this to insert their
arch-specific flow.
In the future, other architectures can also have a chance to define
their own arch-specific ACPI initialization process if necessary.
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Link: https://patch.msgid.link/20241121-intro-acpi-arch-init-v4-1-b1fb517e7d8b@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge additional cpuidle changes for 6.13-rc1:
- Make cpuidle_play_dead() try all idle states with :enter_dead()
callbacks and change their return type to void (Rafael Wysocki).
* pm-cpuidle:
cpuidle: Change :enter_dead() driver callback return type to void
cpuidle: Do not return from cpuidle_play_dead() on callback failures
|
|
The Asus entries in the acpi_quirk_skip_dmi_ids[] table are the only
entries without a comment which model they apply to. Add these comments.
The Asus TF103C entry also is in the wrong place for what is supposed to
be an alphabetically sorted list. Move it up so that the list is properly
sorted and add a comment that the list is alphabetically sorted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241116095825.11660-2-hdegoede@redhat.com
[ rjw: Changelog and subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Acer Iconia One 8 A1-840 (not to be confused with the A1-840FHD which
is a different model) ships with Android 4.4 as factory OS and has the
usual broken DSDT issues for x86 Android tablets.
Add quirks to skip ACPI I2C client enumeration and disable ACPI battery/AC
and ACPI GPIO event handlers.
Also add the "INT33F5" HID for the TI PMIC used on this tablet to the list
of HIDs for which not to skip i2c_client instantiation, since we do want
an ACPI instantiated i2c_client for the PMIC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241116095825.11660-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Both mvme147 and mvme16x platforms have their own RTC driver
implementations that duplicate functionality provided by the rtc-m48t59
driver. Adopt the rtc-m48t59 driver and remove the other ones.
Tested-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/19a16bcc94c42ea9c5397b37b1918c2937e3faab.1731450735.git.fthain@linux-m68k.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Now that the main domain allocating path is calling this function it
doesn't make sense to leave it named _user. Change the name to
alloc_paging_flags() to mirror the new iommu_paging_domain_alloc_flags()
function.
A driver should implement only one of ops->domain_alloc_paging() or
ops->domain_alloc_paging_flags(). The former is a simpler interface with
less boiler plate that the majority of drivers use. The latter is for
drivers with a greater feature set (PASID, multiple page table support,
advanced iommufd support, nesting, etc). Additional patches will be needed
to achieve this.
Link: https://patch.msgid.link/r/2-v1-c252ebdeb57b+329-iommu_paging_flags_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
It turns out all the drivers that are using this immediately call into
another function, so just make that function directly into the op. This
makes paging=NULL for domain_alloc_user and we can remove the argument in
the next patch.
The function mirrors the similar op in the viommu that allocates a nested
domain on top of the viommu's nesting parent. This version supports cases
where a viommu is not being used.
Link: https://patch.msgid.link/r/1-v1-c252ebdeb57b+329-iommu_paging_flags_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iommu/linux into iommufd.git
Merge with Joerg's tree for dependencies on the next patches.
======================================
IOMMU Updates for Linux v6.13:
Including:
- Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function.
- Introduce iommu_paging_domain_alloc_flags().
- Extend support for allocating PASID-capable domains to more
drivers.
- Remove iommu_present().
- Some smaller improvements.
- New IOMMU driver for RISC-V.
- Intel VT-d Updates:
- Add domain_alloc_paging support.
- Enable user space IOPFs in non-PASID and non-svm cases.
- Small code refactoring and cleanups.
- Add domain replacement support for pasid.
- AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default.
- Replace custom domain ID allocator with IDA allocator.
- Add ops->release_domain() support.
- Other improvements to device attach and domain allocation code
paths.
- ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their SMMU.
- Devicetree binding updates for Qualcomm MMU-500 implementations.
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue driver.
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage.
- Remove unused block-splitting support.
- S390 IOMMU:
- Implement support for blocking domain.
- Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186.
- OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver.
======================================
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Provide a guide for developers on how to debug code with a focus on the
media subsystem. This document aims to provide a rough overview over the
possibilities and a rational to help choosing the right tool for the
given circumstances.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241028-media_docs_improve_v3-v3-2-edf5c5b3746f@collabora.com
|
|
This idea was formed after noticing that new developers experience
certain difficulty to navigate within the multitude of different
debugging options in the Kernel and while there often is good
documentation for the tools, the developer has to know first that they
exist and where to find them.
Add a general debugging section to the Kernel documentation, as an
easily locatable entry point to other documentation and as a general
guideline for the topic.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241028-media_docs_improve_v3-v3-1-edf5c5b3746f@collabora.com
|
|
There are currently some doubts about out-of-tree kernel modules licensed
under GPLv3 and if they are supposed to be able to use symbols exported
using EXPORT_SYMBOL_GPL.
Clarify that "Proprietary" means anything non-GPL2 even though the
license might be an open source license. Also disambiguate "GPL
compatible" to "GPLv2 compatible".
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241115103842.585207-2-ukleinek@kernel.org
|
|
GFP_NOFS/GFP_NOIO
After the commit 451769ebb7e79 ("mm/vmalloc: alloc GFP_NO{FS,IO} for
vmalloc") in v5.17 it is now safe to use GFP_NOFS/GFP_NOIO flags
in [k]vmalloc, let's reflect it in documentation.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241119093922.567138-1-ptikhomirov@virtuozzo.com
|
|
Explain that a kernel-doc :identifiers: line can refer to a struct,
union, enum, or typedef as well as functions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241119203201.110953-1-rdunlap@infradead.org
|
|
Use proper spelling for 'discrete'. When at it, capitalize 'Linux',
which is common practice in the documentation.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241120-pwrseq-doc-trivial-fixes-v1-1-19a70f4dd156@gmail.com
|
|
Update references to most txt files to rst files.
Update one reference to an md file to a rst file.
Update one file path to its current location.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-fsdevel@vger.kernel.org
Cc: Ian Kent <raven@themaw.net>
Cc: autofs@vger.kernel.org
Cc: Alexander Aring <aahringo@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Cc: gfs2@lists.linux.dev
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: fsverity@lists.linux.dev
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: ocfs2-devel@lists.linux.dev
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241120055246.158368-1-rdunlap@infradead.org
|
|
There is no reason only the usbg transport would not be its own module,
so make it tristate.
In particular, this fixes a couple of issues the current bool had:
- trans_usbg was apparently not compiled at all when NET_9P=m
- the workaround added in commit 2193ede180dd ("net/9p/usbg: fix
CONFIG_USB_GADGET dependency") became redundant because a tristate item
cannot be built-in when its dependency is a module, so we can depend on
USB_GADGET "normally" again.
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lkml.kernel.org/r/ZzhWRPDNwu225NWz@codewreck.org
Message-ID: <20241122144754.1231919-1-asmadeus@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Kernel logs indicate an IRQ was double-freed.
Pass correct device ID during IRQ release.
Fixes: 71ebd71921e45 ("xen/9pfs: connect to the backend")
Signed-off-by: Alex Zenla <alex@edera.dev>
Signed-off-by: Alexander Merritt <alexander@edera.dev>
Signed-off-by: Ariadne Conill <ariadne@ariadne.space>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241121225100.5736-1-alexander@edera.dev>
[Dominique: remove confusing variable reset to 0]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Using device name as format string of seq_printf() is proned to
"Format string attack", opens possibility for exploitation.
Seq_puts() is safer and more efficient.
Signed-off-by: David Wang <00107082@163.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20241120053055.225195-1-00107082@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/2ce706d3242b9d3e4b9c20c0a7d9a8afcf8897ec.1729423829.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Use display_irqs_enabled only on VLV/CHV where it's relevant. Rename to
vlv_display_irqs_enabled, to emphasize it's really only about VLV/CHV.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f60104ea59687cb8c65b18b4f9ddd832a643407d.1732102179.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move the check for display_irqs_enabled within vlv_display_irq_reset()
and vlv_display_irq_postinstall() to avoid looking at struct
intel_display members within i915 core irq code.
Within display irq code, vlv_display_irq_reset() may need to be called
with !display_irqs_enabled, so add a small wrapper.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ef43e26ebab7f84768391f5053c0eba44b647c89.1732102179.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
struct intel_display replaces struct drm_i915_private as the main
display device pointer. Convert initial plane setup to it, as much as
possible.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9e370d8e90235165539f81ca2d00fdd2e883397f.1732102179.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Avoid accessing struct intel_display members directly from
i915_getparam_ioctl(). Add intel_overlay_available() function to provide
the information for I915_PARAM_HAS_OVERLAY.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/26041645168ce3e76cb8f73bcb4c747619117e06.1732102179.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
struct intel_display replaces struct drm_i915_private as the main
display device pointer. Convert overlay to it, as much as possible.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3680586c05e82fd01d173cfb4f8df015d6db663c.1732102179.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use a temporary variable for DDI mode to simplify the conditions. This
is in line with the other places that read DDI mode.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84892d31807bd8118474dd873e73c4d459f61448.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Refactor the switch-case into an if-ladder similar to
intel_ddi_read_func_ctl() for clarity.
This highlights how TRANS_DDI_MODE_SELECT_FDI_OR_128B132B works on
different platforms.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/191f0210d720f3113a092e1ef0c7996a7dee85a0.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The function has become quite long, and the switch-case statement quite
complex with the fallthrougs. Simplify by splitting to individual
functions and an if-ladder.
This highlights how TRANS_DDI_MODE_SELECT_FDI_OR_128B132B works on
different platforms.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2621df6e6b0b7ac75159cfb112755c35b30ce906.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The temp name is a bit vague for something used so much in the function.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/29d21b8f829e8139cc8ad857a86d3fc967f2ac07.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Move clear_act_sent() and wait_for_act_sent() to intel_ddi.[ch] and make
independent of DP MST. They'll be needed for 128b/132b SST
operation. Rename accordingly.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ef05f5bc222e8ba48d84f75a9ea5dd29667055d2.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use the modern style for defining register contents. Expand the status
register contents a bit.
TODO: There are more VC payload mapping fields, spanning more registers,
and have more bits on more recent platforms.
v2:
- Fix DP_TP_STATUS_STREAMS_ENABLED_MASK mask (Imre)
- Drop status VC3 payload mapping for now
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ef15e6bb58ca847f89c9b39cbc9771cb57db408.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
All the other encoder hooks are named intel_ddi_*, follow suit with
intel_ddi_enable() and intel_ddi_disable(), and the dp/hdmi variants.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9533cf61773f2cab3a6a29acf9e6ecfc00b6e8fd.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make it easier to keep track of what belongs where.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e8efc8fddc3ca93e1256a1dad13bc4eca07c3382.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Use a variable for the encoder to simplify.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/eb8595ae36c6330cce1615059bd2c89a7db79668.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Similar to commit 5674e700d43e ("drm/i915/mst: change naming from fake
encoders to MST stream encoders"), name all MST connector related
functions to mst_connector_*.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d4814a94b97fcff88722e0effd2fb5893b256af.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
All of the functions in question operate on the primary encoder, and
more specifically the primary intel_dp, so pass it around instead of the
encoder for less ambiguity.
Suggested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/165ee8b723c42bcdeb3adf6a1b34ea09371e5d64.1732106557.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
iov_iter_zero
If iov_iter_zero succeeds after failed copy_from_kernel_nofault,
we need to reset the ret value to zero otherwise it will be returned
as final return value of read_kcore_iter.
This fixes objdump -d dump over /proc/kcore for me.
Cc: stable@vger.kernel.org
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Fixes: 3d5854d75e31 ("fs/proc/kcore.c: allow translation of physical memory addresses")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20241121231118.3212000-1-jolsa@kernel.org
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
I recently had an fstests hang where there were two internal tasks
stuck like so:
[ 6559.010870] task:kworker/24:45 state:D stack:12152 pid:631308 tgid:631308 ppid:2 flags:0x00004000
[ 6559.016984] Workqueue: xfs-buf/dm-2 xfs_buf_ioend_work
[ 6559.020349] Call Trace:
[ 6559.022002] <TASK>
[ 6559.023426] __schedule+0x650/0xb10
[ 6559.025734] schedule+0x6d/0xf0
[ 6559.027835] schedule_timeout+0x31/0x180
[ 6559.030582] wait_for_common+0x10c/0x1e0
[ 6559.033495] wait_for_completion+0x1d/0x30
[ 6559.036463] __flush_workqueue+0xeb/0x490
[ 6559.039479] ? mempool_alloc_slab+0x15/0x20
[ 6559.042537] xlog_cil_force_seq+0xa1/0x2f0
[ 6559.045498] ? bio_alloc_bioset+0x1d8/0x510
[ 6559.048578] ? submit_bio_noacct+0x2f2/0x380
[ 6559.051665] ? xlog_force_shutdown+0x3b/0x170
[ 6559.054819] xfs_log_force+0x77/0x230
[ 6559.057455] xlog_force_shutdown+0x3b/0x170
[ 6559.060507] xfs_do_force_shutdown+0xd4/0x200
[ 6559.063798] ? xfs_buf_rele+0x1bd/0x580
[ 6559.066541] xfs_buf_ioend_handle_error+0x163/0x2e0
[ 6559.070099] xfs_buf_ioend+0x61/0x200
[ 6559.072728] xfs_buf_ioend_work+0x15/0x20
[ 6559.075706] process_scheduled_works+0x1d4/0x400
[ 6559.078814] worker_thread+0x234/0x2e0
[ 6559.081300] kthread+0x147/0x170
[ 6559.083462] ? __pfx_worker_thread+0x10/0x10
[ 6559.086295] ? __pfx_kthread+0x10/0x10
[ 6559.088771] ret_from_fork+0x3e/0x50
[ 6559.091153] ? __pfx_kthread+0x10/0x10
[ 6559.093624] ret_from_fork_asm+0x1a/0x30
[ 6559.096227] </TASK>
[ 6559.109304] Workqueue: xfs-cil/dm-2 xlog_cil_push_work
[ 6559.112673] Call Trace:
[ 6559.114333] <TASK>
[ 6559.115760] __schedule+0x650/0xb10
[ 6559.118084] schedule+0x6d/0xf0
[ 6559.120175] schedule_timeout+0x31/0x180
[ 6559.122776] ? call_rcu+0xee/0x2f0
[ 6559.125034] __down_common+0xbe/0x1f0
[ 6559.127470] __down+0x1d/0x30
[ 6559.129458] down+0x48/0x50
[ 6559.131343] ? xfs_buf_item_unpin+0x8d/0x380
[ 6559.134213] xfs_buf_lock+0x3d/0xe0
[ 6559.136544] xfs_buf_item_unpin+0x8d/0x380
[ 6559.139253] xlog_cil_committed+0x287/0x520
[ 6559.142019] ? sched_clock+0x10/0x30
[ 6559.144384] ? sched_clock_cpu+0x10/0x190
[ 6559.147039] ? psi_group_change+0x48/0x310
[ 6559.149735] ? _raw_spin_unlock+0xe/0x30
[ 6559.152340] ? finish_task_switch+0xbc/0x310
[ 6559.155163] xlog_cil_process_committed+0x6d/0x90
[ 6559.158265] xlog_state_shutdown_callbacks+0x53/0x110
[ 6559.161564] ? xlog_cil_push_work+0xa70/0xaf0
[ 6559.164441] xlog_state_release_iclog+0xba/0x1b0
[ 6559.167483] xlog_cil_push_work+0xa70/0xaf0
[ 6559.170260] process_scheduled_works+0x1d4/0x400
[ 6559.173286] worker_thread+0x234/0x2e0
[ 6559.175779] kthread+0x147/0x170
[ 6559.177933] ? __pfx_worker_thread+0x10/0x10
[ 6559.180748] ? __pfx_kthread+0x10/0x10
[ 6559.183231] ret_from_fork+0x3e/0x50
[ 6559.185601] ? __pfx_kthread+0x10/0x10
[ 6559.188092] ret_from_fork_asm+0x1a/0x30
[ 6559.190692] </TASK>
This is an ABBA deadlock where buffer IO completion is triggering a
forced shutdown with the buffer lock held. It is waiting for the CIL
to flush as part of the log force. The CIL flush is blocked doing
shutdown processing of all it's objects, trying to unpin a buffer
item. That requires taking the buffer lock....
For the CIL to be doing shutdown processing, the log must be marked
with XLOG_IO_ERROR, but that doesn't happen until after the log
force is issued. Hence for xfs_do_force_shutdown() to be forcing
the log on a shut down log, we must have had a racing
xlog_force_shutdown and xfs_force_shutdown like so:
p0 p1 CIL push
<holds buffer lock>
xlog_force_shutdown
xfs_log_force
test_and_set_bit(XLOG_IO_ERROR)
xlog_state_release_iclog()
sees XLOG_IO_ERROR
xlog_state_shutdown_callbacks
....
xfs_buf_item_unpin
xfs_buf_lock
<blocks on buffer p1 holds>
xfs_force_shutdown
xfs_set_shutdown(mp) wins
xlog_force_shutdown
xfs_log_force
<blocks on CIL push>
xfs_set_shutdown(mp) fails
<shuts down rest of log>
The deadlock can be mitigated by avoiding the log force on the
second pass through xlog_force_shutdown. Do this by adding another
atomic state bit (XLOG_OP_PENDING_SHUTDOWN) that is set on entry to
xlog_force_shutdown() but doesn't mark the log as shutdown.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
I've been seeing this failure on during xfs/050 recently:
XFS: Assertion failed: dst->d_spc_timer != 0, file: fs/xfs/xfs_qm_syscalls.c, line: 435
....
Call Trace:
<TASK>
xfs_qm_scall_getquota_fill_qc+0x2a2/0x2b0
xfs_qm_scall_getquota_next+0x69/0xa0
xfs_fs_get_nextdqblk+0x62/0xf0
quota_getnextxquota+0xbf/0x320
do_quotactl+0x1a1/0x410
__se_sys_quotactl+0x126/0x310
__x64_sys_quotactl+0x21/0x30
x64_sys_call+0x2819/0x2ee0
do_syscall_64+0x68/0x130
entry_SYSCALL_64_after_hwframe+0x76/0x7e
It turns out that the _qmount call has silently been failing to
unmount and mount the filesystem, so when the softlimit is pushed
past with a buffered write, it is not getting synced to disk before
the next quota report is being run.
Hence when the quota report runs, we have 300 blocks of delalloc
data on an inode, with a soft limit of 200 blocks. XFS dquots
account delalloc reservations as used space, hence the dquot is over
the soft limit.
However, we don't update the soft limit timers until we do a
transactional update of the dquot. That is, the dquot sits over the
soft limit without a softlimit timer being started until writeback
occurs and the allocation modifies the dquot and we call
xfs_qm_adjust_dqtimers() from xfs_trans_apply_dquot_deltas() in
xfs_trans_commit() context.
This isn't really a problem, except for this debug code in
xfs_qm_scall_getquota_fill_qc():
if (xfs_dquot_is_enforced(dqp) && dqp->q_id != 0) {
if ((dst->d_space > dst->d_spc_softlimit) &&
(dst->d_spc_softlimit > 0)) {
ASSERT(dst->d_spc_timer != 0);
}
....
It asserts taht if the used block count is over the soft limit,
it *must* have a soft limit timer running. This is clearly not
the case, because we haven't committed the delalloc space to disk
yet. Hence the soft limit is only exceeded temporarily in memory
(which isn't an issue) and we start the timer the moment we exceed
the soft limit in journalled metadata.
This debug was introduced in:
commit 0d5ad8383061fbc0a9804fbb98218750000fe032
Author: Supriya Wickrematillake <sup@sgi.com>
Date: Wed May 15 22:44:44 1996 +0000
initial checkin
quotactl syscall functions.
The very first quota support commit back in 1996. This is zero-day
debug for Irix and, as it turns out, a zero-day bug in the debug
code because the delalloc code on Irix didn't update the softlimit
timers, either.
IOWs, this issue has been in the code for 28 years.
We obviously don't care if soft limit timers are a bit rubbery when
we have delalloc reservations in memory. Production systems running
quota reports have been exposed to this situation for 28 years and
nobody has noticed it, so the debug code is essentially worthless at
this point in time.
We also have the on-disk dquot verifiers checking that the soft
limit timer is running whenever the dquot is over the soft limit
before we write it to disk and after we read it from disk. These
aren't firing, so it is clear the issue is purely a temporary
in-memory incoherency that I never would have noticed had the test
not silently failed to unmount the filesystem.
Hence I'm simply going to trash this runtime debug because it isn't
useful in the slightest for catching quota bugs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The runt AG at the end of a filesystem is almost always smaller than
the mp->m_sb.sb_agblocks. Unfortunately, when setting the max_agbno
limit for the inode chunk allocation, we do not take this into
account. This means we can allocate a sparse inode chunk that
overlaps beyond the end of an AG. When we go to allocate an inode
from that sparse chunk, the irec fails validation because the
agbno of the start of the irec is beyond valid limits for the runt
AG.
Prevent this from happening by taking into account the size of the
runt AG when allocating inode chunks. Also convert the various
checks for valid inode chunk agbnos to use xfs_ag_block_count()
so that they will also catch such issues in the future.
Fixes: 56d1115c9bc7 ("xfs: allocate sparse inode chunks on full chunk allocation failure")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Compat features are new features that older kernels can safely ignore,
allowing read-write mounts without issues. The current sb write validation
implementation returns -EFSCORRUPTED for unknown compat features,
preventing filesystem write operations and contradicting the feature's
definition.
Additionally, if the mounted image is unclean, the log recovery may need
to write to the superblock. Returning an error for unknown compat features
during sb write validation can cause mount failures.
Although XFS currently does not use compat feature flags, this issue
affects current kernels' ability to mount images that may use compat
feature flags in the future.
Since superblock read validation already warns about unknown compat
features, it's unnecessary to repeat this warning during write validation.
Therefore, the relevant code in write validation is being removed.
Fixes: 9e037cb7972f ("xfs: check for unknown v5 feature bits in superblock write verifier")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Dividing a 64-bit integer prevents building this for 32-bit targets:
ERROR: modpost: "__aeabi_uldivmod" [drivers/gpu/drm/rockchip/rockchipdrm.ko] undefined!
As this function is not performance criticial, just Use the div_u64() helper.
Fixes: 128a9bf8ace2 ("drm/rockchip: Add basic RK3588 HDMI output support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20241018151016.3496613-1-arnd@kernel.org
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
(cherry picked from commit 4b64b4a81fcd51f570c046cf904aef19ec756d45)
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
xfs_attr_shortform_list() only called from a non-transactional context, it
hold ilock before alloc memory and maybe trapped in memory reclaim. Since
commit 204fae32d5f7("xfs: clean up remaining GFP_NOFS users") removed
GFP_NOFS flag, lockdep warning will be report as [1]. Eliminate lockdep
false positives by use __GFP_NOLOCKDEP to alloc memory
in xfs_attr_shortform_list().
[1] https://lore.kernel.org/linux-xfs/000000000000e33add0616358204@google.com/
Reported-by: syzbot+4248e91deb3db78358a2@syzkaller.appspotmail.com
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
LoongArch architecture changes for 6.13 depend on the sched-core changes
(PREEMPT_LAZY) to completely support RT, so merge them to create a base.
|
|
The PPC64 specific MMIO setup open codes DT address functions rather
than using standard address parsing functions. The open-coded version
fails to handle any address translation and is not endian safe.
I haven't found any evidence of what platform used this. The only thing
that turned up was a PPC405 platform, but that is 32-bit and PPC405
support is being removed as well. CONFIG_TCG_ATMEL is not enabled for
any powerpc config and never was. The support was added in 2005 and
hasn't been touched since.
Rather than try to modernize and fix this code, just remove it.
[jarkko: fixed couple of style issues reported by checkpatch.pl --strict
and put offset into parentheses in the macro declarations.]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
