summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-15media: mxb: allow tuner/input/audio ioctls for vbiHans Verkuil
The vbi stream comes from the same video input as the video stream. So all the related ioctls to that are just as valid for the vbi stream. Add these. This fixes a V4L2 compliance issue. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: common: saa7146: add support for missing .vidioc_try_fmt_vbi_capHans Verkuil
Support for VIDIOC_TRY_FMT for the vbi device was missing. Add it. This fixes a V4L2 compliance issue. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: mxb: update the tvnorms when changing inputHans Verkuil
The tuner input uses different tvnorms compared to the S-Video/Composite inputs. So update the tvnorms field in struct video_device when switching inputs. This fixes a V4L2 compliance issue. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: common: saa7146: allow S_STD(G_STD)Hans Verkuil
If the requested TV standard is identical to the current TV standard, then return 0, even when the vb2 queues are busy. This fixes a V4L2 compliance issue. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: common: saa7146: check minimum video format sizeHans Verkuil
There was no check for the minimum width and height, so 0 values were just passed on. Fix this. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: common: saa7146: fix compliance problems with field handlingHans Verkuil
The initial field value of the format is ANY, which isn't allowed. Change to INTERLACED. VIDIOC_TRY_FMT will overwrite vv->last_field, which is an unwanted side-effect, so drop this. And finally vidioc_s_fmt_vid_cap didn't initialize vv->last_field correctly. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: saa7146: convert to vb2Hans Verkuil
Convert this driver from the old videobuf framework to the vb2 frame. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: common: saa7146: use for_each_sg_dma_pageHans Verkuil
When building the pgtables, use for_each_sg_dma_page. Also clean up the code a bit. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: common: saa7146: fix broken V4L2_PIX_FMT_YUV422P supportHans Verkuil
The U and V components were swapped. Drop the FORMAT_BYTE_SWAP to fix this. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: av7110: replace BUG_ON by WARN_ONHans Verkuil
No need for BUG_ON, WARN_ON is a lot friendlier. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: common: saa7146: replace BUG_ON by WARN_ONHans Verkuil
No need for BUG_ON, WARN_ON is a lot friendlier. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: common: saa7146: drop 'fmt' from struct saa7146_bufHans Verkuil
Use the video_fmt in saa7146_vv instead of having a pointer to it in struct saa7146_buf. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: saa7146: drop 'dev' and 'resources' from struct saa7146_fhHans Verkuil
Instead use vv->resources and video_drvdata(file) to obtain this information. This prepares for the vb2 conversion later when saa7146_fh is dropped completely. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: pci: saa7146: hexium_orion: initialize input 0Hans Verkuil
When this driver is loaded for the first time, input 0 is not initialized. In order to capture from that input you would have to switch to input 1, then back to 0. Properly initialize the input when the driver is loaded. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: common/saa7146: fix VFL direction for vbi outputHans Verkuil
The VBI output device didn't have VFL_DIR_TX set, so this didn't work anymore since the V4L2 core thought that it was a capture device instead. Fix this. Also drop invalid capabilities for the VBI output device. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: common: saa7146: disable clippingHans Verkuil
The patch removing overlay support also removed the old saa7146_disable_clipping() function, but that is needed in order to capture video. Without this the Hexium cards won't show any video. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 7777694f8066 ("media: saa7146: drop overlay support") Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: dt-bindings: media: renesas,vsp1: Document RZ/V2L VSPD bindingsBiju Das
Document VSPD found in RZ/V2L SoC. The VSPD block is identical to RZ/G2L SoC and therefore use RZ/G2L fallback to avoid any driver changes. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: dt-bindings: media: renesas,fcp: Document RZ/{G2L,V2L} FCPVD bindingsBiju Das
Document FCPVD found in RZ/G2L alike SoCs. FCPVD block is similar to FCP for VSP found on R-Car SoC's . It has 3 clocks compared to 1 clock on fcpv. Introduce new compatibles renesas,r9a07g044-fcpvd for RZ/G2{L,LC} and renesas,r9a07g054-fcpvd for RZ/V2L to handle this difference. The 3 clocks are shared between du, vspd and fcpvd. No driver changes are required as generic compatible string "renesas,fcpv" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: mediatek: vcodec: Coverity issues in encoder driverIrui Wang
CERT-C Characters and Strings: check core id is in valid range: dev->reg_base[dev->venc_pdata->core_id] evaluates to an address that could be at negative offset of an array. CERT-C Expression: check buf is not NULL before used: Dereferencing buf, which is known to be NULL. Signed-off-by: Irui Wang <irui.wang@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: mediatek: vcodec: Fix potential array out-of-bounds in decoder ↵Wei Chen
queue_setup variable *nplanes is provided by user via system call argument. The possible value of q_data->fmt->num_planes is 1-3, while the value of *nplanes can be 1-8. The array access by index i can cause array out-of-bounds. Fix this bug by checking *nplanes against the array size. Signed-off-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: mediatek: vcodec: add remove function for decoder platform driverYunfei Dong
Need to disable decoder power when remove decoder hardware driver, adding remove callback function in the definition of platform driver. Fixes: c05bada35f01 ("media: mtk-vcodec: Add to support multi hardware decode") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: mediatek: vcodec: fix decoder disable pm crashYunfei Dong
Can't call pm_runtime_disable when the architecture support sub device for 'dev->pm.dev' is NUll, or will get below crash log. [ 10.771551] pc : _raw_spin_lock_irq+0x4c/0xa0 [ 10.771556] lr : __pm_runtime_disable+0x30/0x130 [ 10.771558] sp : ffffffc01e4cb800 [ 10.771559] x29: ffffffc01e4cb800 x28: ffffffdf082108a8 [ 10.771563] x27: ffffffc01e4cbd70 x26: ffffff8605df55f0 [ 10.771567] x25: 0000000000000002 x24: 0000000000000002 [ 10.771570] x23: ffffff85c0dc9c00 x22: 0000000000000001 [ 10.771573] x21: 0000000000000001 x20: 0000000000000000 [ 10.771577] x19: 00000000000000f4 x18: ffffffdf2e9fbe18 [ 10.771580] x17: 0000000000000000 x16: ffffffdf2df13c74 [ 10.771583] x15: 00000000000002ea x14: 0000000000000058 [ 10.771587] x13: ffffffdf2de1b62c x12: ffffffdf2e9e30e4 [ 10.771590] x11: 0000000000000000 x10: 0000000000000001 [ 10.771593] x9 : 0000000000000000 x8 : 00000000000000f4 [ 10.771596] x7 : 6bff6264632c6264 x6 : 0000000000008000 [ 10.771600] x5 : 0080000000000000 x4 : 0000000000000001 [ 10.771603] x3 : 0000000000000008 x2 : 0000000000000001 [ 10.771608] x1 : 0000000000000000 x0 : 00000000000000f4 [ 10.771613] Call trace: [ 10.771617] _raw_spin_lock_irq+0x4c/0xa0 [ 10.771620] __pm_runtime_disable+0x30/0x130 [ 10.771657] mtk_vcodec_probe+0x69c/0x728 [mtk_vcodec_dec 800cc929d6631f79f9b273254c8db94d0d3500dc] [ 10.771662] platform_drv_probe+0x9c/0xbc [ 10.771665] really_probe+0x13c/0x3a0 [ 10.771668] driver_probe_device+0x84/0xc0 [ 10.771671] device_driver_attach+0x54/0x78 Fixes: ba31a5b39400 ("media: mtk-vcodec: Remove mtk_vcodec_release_dec_pm") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: hantro: use devm_reset_control_array_get_optional_exclusive()Ye Xingchen
Switch to devm_reset_control_array_get_optional_exclusive() API. Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: dt-bindings: media: renesas,vin: Add binding for V4HNiklas Söderlund
Document support for the VIN module in the Renesas V4H (r8a779g0) SoC. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: dt-bindings: media: renesas,csi2: Add binding for V4HNiklas Söderlund
Document support for the CSI-2 module in the Renesas V4H (r8a779g0) SoC. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: dt-bindings: media: renesas,isp: Add binding for V4HNiklas Söderlund
Document support for the ISP module in the Renesas V4H (r8a779g0) SoC. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: sun6i-isp: Convert to platform remove callback ↵Uwe Kleine-König
returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: sunxi: cedrus: Convert to platform remove callback ↵Uwe Kleine-König
returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: rkvdec: Convert to platform remove callback returning ↵Uwe Kleine-König
void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: omap4iss: Convert to platform remove callback ↵Uwe Kleine-König
returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: meson: vdec: Convert to platform remove callback ↵Uwe Kleine-König
returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: imx8mq-mipi-csi2: Convert to platform remove callback ↵Uwe Kleine-König
returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: imx6-mipi-csi2: Convert to platform remove callback ↵Uwe Kleine-König
returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: imx-media-dev: Convert to platform remove callback ↵Uwe Kleine-König
returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: imx-media-csi: Convert to platform remove callback ↵Uwe Kleine-König
returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: atmel-sama7g5-isc: Convert to platform remove ↵Uwe Kleine-König
callback returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: staging: media: atmel-sama5d2-isc: Convert to platform remove ↵Uwe Kleine-König
callback returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: Documentation: admin-guide: cec.rst: document NTP issueHans Verkuil
The CEC pin framework is affected by NTP daemons speeding up or slowing down the system clock. Document this and explain how to fix this for chronyd. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-15media: cec: core: not all messages were passed on when monitoringHans Verkuil
The valid_la boolean is used to check if the destination logical address is either 15 (broadcast) or our logical address. If it is for another logical address, then only adapters that have the CEC_CAP_MONITOR_ALL capability can pass it on. However, it is also used to do more detailed validity checks, such as whether the message was broadcast when it should have been directed, or vice versa, in which case the message must be ignored according to the spec. But that should not apply to monitoring. Add a new bool that just checks the LA and nothing else. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-04-14Merge tag 'v6.3-next-soc' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/drivers mtk-svs: smaller coding style changes mtk-mutex: - add support for mt8365 display and mt8195 VPP mutex - add support for more then 32 mods - use module_platform_driver instead of open coding mtk-mmsys: - add support for mt8195 RSZ switching - add remove function - use module_platform_driver instead of open coding - split out mt8173 routing table from the legacy table - bump up resets in mt8173 to 64 - add support for mt6795 (Helio X10) - clean-up IS_REACHABLE code for cmdq * tag 'v6.3-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (25 commits) soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS soc: mediatek: mutex: Use dev_err_probe() soc: mediatek: mtk-mmsys: Add support for MT6795 Helio X10 soc: mediatek: mtk-mmsys: Change MT8173 num_resets to 64 soc: mediatek: mtk-mmsys: Split out MT8173 mmsys DDP routing table soc: mediatek: Cleanup ifdefs for IS_REACHABLE(CONFIG_MTK_CMDQ) soc: mediatek: cmdq: Add inline functions for !CONFIG_MTK_CMDQ soc: mediatek: mtk-mutex: Use module_platform_driver() macro soc: mediatek: mtk-mutex: Replace max handles number with definition soc: mediatek: mtk-mutex: Compress of_device_id array entries soc: mediatek: mtk-mmsys: Add MODULE_DEVICE_TABLE() to allow auto-load soc: mediatek: mtk-mmsys: Compress of_device_id array entries soc: mediatek: mtk-mmsys: Use module_platform_driver() macro soc: mediatek: mtk-mmsys: Add .remove() callback dt-bindings: soc: mediatek: add display mutex for MT8365 SoC dt-bindings: soc: mediatek: specify which compatible requires clocks property soc: mediatek: mtk-svs: add thermal voltage compensation if needed soc: mediatek: mtk-svs: fix passing zero to 'PTR_ERR' soc: mediatek: mtk-svs: delete node name check soc: mediatek: mutex: support MT8195 VPPSYS ... Link: https://lore.kernel.org/r/bc9f7a74-ce12-b323-021c-ff2c0473e979@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'v6.3-next-dts64' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt mt6795 - enable frequency hopping controller (FHCTL) - add i2c, power domains and some clocks for video enconde/decode - Sony Xperia M5 enable touchscreen, proximity sensor, accelerometer and NFC mt8173 - align keys with DT binding mt8183 - enable GPU DVFS mt8186 - enable GPU mt8192 - enable GPU mt8195 - add mutex for Video Processor Pipeline Subsystem (VPP) - add support for Mali-G57 Valhall Natt GPU baked by panfrost - add support for display on vdosys1 - add thermal support - add display PWM mt8365 - add support for the eval kit including i2c, pmic-wrapper, mmc and ethernet * tag 'v6.3-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (50 commits) arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMM050 Magnetometer arm64: dts: mediatek: mt6795-xperia-m5: Add Bosch BMA255 Accelerometer arm64: dts: mediatek: mt6795: Add tertiary PWM node arm64: dts: mediatek: mt8173: correct GPIO keys wakeup arm64: dts: mediatek: mt6795-xperia-m5: Add NXP PN547 NFC on I2C3 arm64: dts: mediatek: mt6795-xperia-m5: Add Sensortek STK3310 Proximity arm64: dts: mediatek: mt6795-xperia-m5: Add Synaptics RMI4 Touchscreen arm64: dts: mediatek: mt6795-xperia-m5: Enable I2C 0-3 busses arm64: dts: mediatek: mt6795: Add VDECSYS and VENCSYS clocks arm64: dts: mediatek: mt6795: Add SoC power domains arm64: dts: mediatek: mt6795: Add nodes for I2C controllers arm64: dts: mediatek: mt6795: xperia-m5: Enable Frequency Hopping arm64: dts: mediatek: mt6795: Add apmixedsys syscon node arm64: dts: mediatek: mt6795: Add Frequency Hopping Controller node arm64: dts: mediatek: cherry: Add configuration for display backlight arm64: dts: mediatek: mt8195: Add display pwm nodes arm64: dts: mediatek: mt8195: Add temperature mitigation threshold arm64: dts: mediatek: mt8195: Add thermal zones and thermal nodes arm64: dts: mediatek: add ethernet support for mt8365 SoC arm64: dts: mediatek: add mmc support for mt8365 SoC ... Link: https://lore.kernel.org/r/6920736b-ddb3-29df-d0b2-46db40cef49f@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'v6.3-next-dts32' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/dt mt7623: Disable not exising home key mt2701: change node name to match DT bindings * tag 'v6.3-next-dts32' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: disable home key on Bananapi BPI-R2 arm: dts: mediatek: Fix existing NAND controller node name Link: https://lore.kernel.org/r/c3b17357-e08d-da7e-def0-a7f9e0b95cb7@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14drm/amdgpu: add some basic elements for multiple XCD caseLe Ma
Add some basic definitions and structure member. Inscrease MAX_WB slots to 1024 to support the increasing number of rings for multiple partitions. v2: unify naming style Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-14drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)Le Ma
It looks better to place this field in ring structure. Also drop the repeated ring funcs definitions if there's no difference except for vmhub field. v2: rename the field to vm_hub like others (Le) v3: apply the changes to new ip blocks (Hawking) v4: fix vcn sw ring (Alex) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-14Revert "drm/amdgpu: enable ras for mp0 v13_0_10 on SRIOV"Jane Jian
This reverts commit fe120b9f5ce873516a2604e4ff0c19084be94e8c. This patch impacts sriov multi-vf stability Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-14drm/amdgpu: add common ip block for GC 9.4.3Hawking Zhang
Add common IP handling for GC 9.4.3 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-14drm/amd/display: Add logging when DP link training Clock recovery is SuccessfulSrinivasan Shanmugam
Log when Clock recovery is successful, as part of DP link training process. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-14drm/amdgpu: add common early init support for GC 9.4.3Hawking Zhang
init asic funcs and cp/pg flags for GC 9.4.3 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-14drm/amdgpu: switch to v9_4_3 gfx_funcs callbacks for GC 9.4.3Hawking Zhang
add gfx_funcs callbacks implemenation based on gc_v9_4_3 ip headers Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-14drm/amd/display: Add logging when setting DP sink power state failsSrinivasan Shanmugam
Log if we fail to setup sink power states. Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-23 08:51:10 +0000