summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-02IB: Allow build of hw/ and ulp/ subdirectories independentlyYann Droneaud
It is not possible to build only the drivers/infiniband/hw/ (or ulp/) subdirectory with command such as: $ make ARCH=x86_64 O=./obj-x86_64/ drivers/infiniband/hw/ This fails with following error messages: make[2]: Nothing to be done for `all'. make[2]: Nothing to be done for `relocs'. CHK include/config/kernel.release Using /home/ydroneaud/src/linux as source for kernel GEN /home/ydroneaud/src/linux/obj-x86_64/Makefile CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h CALL /home/ydroneaud/src/linux/scripts/checksyscalls.sh /home/ydroneaud/src/linux/scripts/Makefile.build:44: /home/ydroneaud/src/linux/drivers/infiniband/hw/Makefile: No such file or directory make[2]: *** No rule to make target `/home/ydroneaud/src/linux/drivers/infiniband/hw/Makefile'. Stop. make[1]: *** [drivers/infiniband/hw/] Error 2 make: *** [sub-make] Error 2 This patch creates a Makefile in hw/ and ulp/ and moves each corresponding parts of drivers/infiniband/Makefile in the new Makefiles. It should not break build except if some hw/ drivers or ulp/ were allowed previously to be built while CONFIG_INFINIBAND is set to 'n', but according to drivers/infiniband/Kconfig, it's not possible. So it should be safe to apply. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-06-02net: fix inet_getid() and ipv6_select_ident() bugsEric Dumazet
I noticed we were sending wrong IPv4 ID in TCP flows when MTU discovery is disabled. Note how GSO/TSO packets do not have monotonically incrementing ID. 06:37:41.575531 IP (id 14227, proto: TCP (6), length: 4396) 06:37:41.575534 IP (id 14272, proto: TCP (6), length: 65212) 06:37:41.575544 IP (id 14312, proto: TCP (6), length: 57972) 06:37:41.575678 IP (id 14317, proto: TCP (6), length: 7292) 06:37:41.575683 IP (id 14361, proto: TCP (6), length: 63764) It appears I introduced this bug in linux-3.1. inet_getid() must return the old value of peer->ip_id_count, not the new one. Lets revert this part, and remove the prevention of a null identification field in IPv6 Fragment Extension Header, which is dubious and not even done properly. Fixes: 87c48fa3b463 ("ipv6: make fragment identifications less predictable") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02drivers/tty/hvc/hvc_tile.c: use PTR_ERR_OR_ZEROFabian Frederick
replace IS_ERR/PTR_ERR Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-06-02net: stmmac: Handle different error codes from platform_get_irq_bynameChen-Yu Tsai
The following patch moved device tree interrupt resolution into platform_get_irq_byname: ad69674 of/irq: do irq resolution in platform_get_irq_byname() As a result, the function no longer only return -ENXIO on error. This breaks DT based probing of stmmac, as seen in test runs of linux-next next-20140526 cubie2-sunxi_defconfig: http://lists.linaro.org/pipermail/kernel-build-reports/2014-May/003659.html This patch makes the stmmac_platform probe function properly handle error codes, such as returning for deferred probing, and other codes returned by of_irq_get_by_name. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02net: qmi_wwan: interface #11 in Sierra Wireless MC73xx is not QMIAleksander Morgado
This interface is unusable, as the cdc-wdm character device doesn't reply to any QMI command. Also, the out-of-tree Sierra Wireless GobiNet driver fully skips it. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02net: qmi_wwan: add additional Sierra Wireless QMI devicesAleksander Morgado
A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02Merge branch 'for-3.16/drivers' of git://git.kernel.dk/linux-block into nextLinus Torvalds
Pull block driver changes from Jens Axboe: "Now that the core bits are in, here's the pull request for the driver related changes for 3.16. Nothing out of the ordinary here, mostly business as usual. There are a few pulls of for-3.16/core into this branch, which were done when the blk-mq was modified after the mtip32xx conversion was put in. The pull request contains: - skd and cciss converted to use pci_enable_msix_exact(). From Alexander Gordeev. - A few mtip32xx fixes from Asai @ Micron. - The conversion of mtip32xx from make_request_fn to blk-mq, and a later small fix for that conversion on quiescing for non-queued IO. From me. - A fix for bsg to use an exported function to check whether this driver is request based or not. Needed updating for blk-mq, which is request based, but does not have a request_fn hook. From me. - Small floppy bug fix from Jiri. - A series of cleanups for the cdrom uniform layer from Joe Perches. Gets rid of various old ugly macros, making the code conform more to the modern coding style. - A series of patches for drbd from the drbd crew (Lars Ellenberg and Philipp Reisner). - A use-after-free fix for null_blk from Ming Lei. - Also from Ming Lei is a performance patch for virtio-blk, which can net us a 3x win on kvm platforms where world notification is expensive. - Ming Lei also fixed a stall issue in virtio-blk, due to a race between queue start/stop and resource limits. - A small batch of fixes for xen-blk{back,front} from Olaf Hering and Valentin Priescu" * 'for-3.16/drivers' of git://git.kernel.dk/linux-block: (54 commits) block: virtio_blk: don't hold spin lock during world switch xen-blkback: defer freeing blkif to avoid blocking xenwatch xen blkif.h: fix comment typo in discard-alignment xen/blkback: disable discard feature if requested by toolstack xen-blkfront: remove type check from blkfront_setup_discard floppy: do not corrupt bio.bi_flags when reading block 0 mtip32xx: move error handling to service thread virtio_blk: fix race between start and stop queue mtip32xx: stop block hardware queues before quiescing IO mtip32xx: blk_mq_init_queue() returns an ERR_PTR mtip32xx: convert to use blk-mq cdrom: Remove unnecessary prototype for cdrom_get_disc_info cdrom: Remove unnecessary prototype for cdrom_mrw_exit cdrom: Remove cdrom_count_tracks prototype cdrom: Remove cdrom_get_next_writeable prototype cdrom: Remove cdrom_get_last_written prototype cdrom: Move mmc_ioctls above cdrom_ioctl to remove unnecessary prototype cdrom: Remove unnecessary sanitize_format prototype cdrom: Remove unnecessary check_for_audio_disc prototype cdrom: Remove prototype for open_for_data ...
2014-06-02tracing: Print max callstack on stacktrace bugMinchan Kim
While I played with my own feature(ex, something on the way to reclaim), the kernel would easily oops. I guessed that the reason had to do with stack overflow and wanted to prove it. I discovered the stack tracer which proved to be very useful for me but the kernel would oops before my user program gather the information via "watch cat /sys/kernel/debug/tracing/stack_trace" so I couldn't get any message from that. What I needed was to have the stack tracer emit the kernel stack usage before it does the oops so I could find what was hogging the stack. This patch shows the callstack of max stack usage right before an oops so we can find a culprit. So, the result is as follows. [ 1116.522206] init: lightdm main process (1246) terminated with status 1 [ 1119.922916] init: failsafe-x main process (1272) terminated with status 1 [ 3887.728131] kworker/u24:1 (6637) used greatest stack depth: 256 bytes left [ 6397.629227] cc1 (9554) used greatest stack depth: 128 bytes left [ 7174.467392] Depth Size Location (47 entries) [ 7174.467392] ----- ---- -------- [ 7174.467785] 0) 7248 256 get_page_from_freelist+0xa7/0x920 [ 7174.468506] 1) 6992 352 __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469224] 2) 6640 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 3) 6632 168 new_slab+0x2c5/0x370 [ 7174.469413] 4) 6464 8 __slab_alloc+0x3a9/0x501 [ 7174.469413] 5) 6456 80 __kmalloc+0x1cb/0x200 [ 7174.469413] 6) 6376 376 vring_add_indirect+0x36/0x200 [ 7174.469413] 7) 6000 144 virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] 8) 5856 288 __virtblk_add_req+0xda/0x1b0 [ 7174.469413] 9) 5568 96 virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] 10) 5472 128 __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] 11) 5344 16 blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] 12) 5328 96 blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] 13) 5232 112 blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] 14) 5120 112 blk_flush_plug_list+0xc7/0x220 [ 7174.469413] 15) 5008 64 io_schedule_timeout+0x88/0x100 [ 7174.469413] 16) 4944 128 mempool_alloc+0x145/0x170 [ 7174.469413] 17) 4816 96 bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] 18) 4720 48 get_swap_bio+0x30/0x90 [ 7174.469413] 19) 4672 160 __swap_writepage+0x150/0x230 [ 7174.469413] 20) 4512 32 swap_writepage+0x42/0x90 [ 7174.469413] 21) 4480 320 shrink_page_list+0x676/0xa80 [ 7174.469413] 22) 4160 208 shrink_inactive_list+0x262/0x4e0 [ 7174.469413] 23) 3952 304 shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] 24) 3648 80 shrink_zone+0x3f/0x110 [ 7174.469413] 25) 3568 128 do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] 26) 3440 208 try_to_free_pages+0xf7/0x1e0 [ 7174.469413] 27) 3232 352 __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] 28) 2880 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 29) 2872 200 __page_cache_alloc+0x13f/0x160 [ 7174.469413] 30) 2672 80 find_or_create_page+0x4c/0xb0 [ 7174.469413] 31) 2592 80 ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] 32) 2512 176 ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] 33) 2336 128 ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] 34) 2208 256 ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] 35) 1952 160 ext4_map_blocks+0x325/0x530 [ 7174.469413] 36) 1792 384 ext4_writepages+0x6d1/0xce0 [ 7174.469413] 37) 1408 16 do_writepages+0x23/0x40 [ 7174.469413] 38) 1392 96 __writeback_single_inode+0x45/0x2e0 [ 7174.469413] 39) 1296 176 writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] 40) 1120 80 __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] 41) 1040 160 wb_writeback+0x29b/0x350 [ 7174.469413] 42) 880 208 bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] 43) 672 144 process_one_work+0x1d2/0x570 [ 7174.469413] 44) 528 112 worker_thread+0x116/0x370 [ 7174.469413] 45) 416 240 kthread+0xf3/0x110 [ 7174.469413] 46) 176 176 ret_from_fork+0x7c/0xb0 [ 7174.469413] ------------[ cut here ]------------ [ 7174.469413] kernel BUG at kernel/trace/trace_stack.c:174! [ 7174.469413] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 7174.469413] Dumping ftrace buffer: [ 7174.469413] (ftrace buffer empty) [ 7174.469413] Modules linked in: [ 7174.469413] CPU: 0 PID: 440 Comm: kworker/u24:0 Not tainted 3.14.0+ #212 [ 7174.469413] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 7174.469413] Workqueue: writeback bdi_writeback_workfn (flush-253:0) [ 7174.469413] task: ffff880034170000 ti: ffff880029518000 task.ti: ffff880029518000 [ 7174.469413] RIP: 0010:[<ffffffff8112336e>] [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP: 0000:ffff880029518290 EFLAGS: 00010046 [ 7174.469413] RAX: 0000000000000030 RBX: 000000000000002f RCX: 0000000000000000 [ 7174.469413] RDX: 0000000000000000 RSI: 000000000000002f RDI: ffffffff810b7159 [ 7174.469413] RBP: ffff8800295182f0 R08: ffffffffffffffff R09: 0000000000000000 [ 7174.469413] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff82768dfc [ 7174.469413] R13: 000000000000f2e8 R14: ffff8800295182b8 R15: 00000000000000f8 [ 7174.469413] FS: 0000000000000000(0000) GS:ffff880037c00000(0000) knlGS:0000000000000000 [ 7174.469413] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 7174.469413] CR2: 00002acd0b994000 CR3: 0000000001c0b000 CR4: 00000000000006f0 [ 7174.469413] Stack: [ 7174.469413] 0000000000000000 ffffffff8114fdb7 0000000000000087 0000000000001c50 [ 7174.469413] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7174.469413] 0000000000000002 ffff880034170000 ffff880034171028 0000000000000000 [ 7174.469413] Call Trace: [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff816eee3f>] ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff810a23fa>] ? __bfs+0x11a/0x270 [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff8119092f>] ? alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff811507fd>] __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469413] [<ffffffff810a4de6>] ? check_irq_usage+0x96/0xe0 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81199cd5>] ? new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff81199cd5>] new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff816db002>] __slab_alloc+0x3a9/0x501 [ 7174.469413] [<ffffffff8119af8b>] ? __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8119af8b>] __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141de10>] ? vring_add_indirect+0x200/0x200 [ 7174.469413] [<ffffffff8141dc46>] vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141e402>] virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] [<ffffffff8148e35a>] __virtblk_add_req+0xda/0x1b0 [ 7174.469413] [<ffffffff8148e503>] virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] [<ffffffff8134aa0f>] __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] [<ffffffff8134b0d5>] blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] [<ffffffff8134b7bb>] blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] [<ffffffff8134be5b>] blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] [<ffffffff81342237>] blk_flush_plug_list+0xc7/0x220 [ 7174.469413] [<ffffffff816e60ef>] ? _raw_spin_unlock_irqrestore+0x3f/0x70 [ 7174.469413] [<ffffffff816e16e8>] io_schedule_timeout+0x88/0x100 [ 7174.469413] [<ffffffff816e1665>] ? io_schedule_timeout+0x5/0x100 [ 7174.469413] [<ffffffff81149415>] mempool_alloc+0x145/0x170 [ 7174.469413] [<ffffffff8109baf0>] ? __init_waitqueue_head+0x60/0x60 [ 7174.469413] [<ffffffff811e246b>] bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184110>] get_swap_bio+0x30/0x90 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184660>] __swap_writepage+0x150/0x230 [ 7174.469413] [<ffffffff810ab405>] ? do_raw_spin_unlock+0x5/0xa0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184515>] ? __swap_writepage+0x5/0x230 [ 7174.469413] [<ffffffff81184782>] swap_writepage+0x42/0x90 [ 7174.469413] [<ffffffff8115ae96>] shrink_page_list+0x676/0xa80 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115b872>] shrink_inactive_list+0x262/0x4e0 [ 7174.469413] [<ffffffff8115c1c1>] shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] [<ffffffff8115c4bf>] shrink_zone+0x3f/0x110 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115c9e6>] do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] [<ffffffff8115cf47>] try_to_free_pages+0xf7/0x1e0 [ 7174.469413] [<ffffffff81150db3>] __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81145c0f>] ? __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81145c0f>] __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81146c6c>] find_or_create_page+0x4c/0xb0 [ 7174.469413] [<ffffffff811463e5>] ? find_get_page+0x5/0x130 [ 7174.469413] [<ffffffff812837b9>] ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] [<ffffffff81284c07>] ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] [<ffffffff81281070>] ? ext4_mb_use_preallocated+0x40/0x360 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81287eb8>] ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] [<ffffffff8127d83b>] ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] [<ffffffff8124e6d5>] ext4_map_blocks+0x325/0x530 [ 7174.469413] [<ffffffff81253871>] ext4_writepages+0x6d1/0xce0 [ 7174.469413] [<ffffffff812531a0>] ? ext4_journalled_write_end+0x330/0x330 [ 7174.469413] [<ffffffff811539b3>] do_writepages+0x23/0x40 [ 7174.469413] [<ffffffff811d2365>] __writeback_single_inode+0x45/0x2e0 [ 7174.469413] [<ffffffff811d36ed>] writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] [<ffffffff811d39de>] __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] [<ffffffff811d40bb>] wb_writeback+0x29b/0x350 [ 7174.469413] [<ffffffff81057c3d>] ? __local_bh_enable_ip+0x6d/0xd0 [ 7174.469413] [<ffffffff811d6e9c>] bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81070672>] process_one_work+0x1d2/0x570 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81071bb6>] worker_thread+0x116/0x370 [ 7174.469413] [<ffffffff81071aa0>] ? manage_workers.isra.19+0x2e0/0x2e0 [ 7174.469413] [<ffffffff81078e53>] kthread+0xf3/0x110 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] [<ffffffff816ef0ec>] ret_from_fork+0x7c/0xb0 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] Code: c0 49 bc fc 8d 76 82 ff ff ff ff e8 44 5a 5b 00 31 f6 8b 05 95 2b b3 00 48 39 c6 7d 0e 4c 8b 04 f5 20 5f c5 81 49 83 f8 ff 75 11 <0f> 0b 48 63 05 71 5a 64 01 48 29 c3 e9 d0 fd ff ff 48 8d 5e 01 [ 7174.469413] RIP [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP <ffff880029518290> [ 7174.469413] ---[ end trace c97d325b36b718f3 ]--- Link: http://lkml.kernel.org/p/1401683592-1651-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-02bridge: Prevent insertion of FDB entry with disallowed vlanToshiaki Makita
br_handle_local_finish() is allowing us to insert an FDB entry with disallowed vlan. For example, when port 1 and 2 are communicating in vlan 10, and even if vlan 10 is disallowed on port 3, port 3 can interfere with their communication by spoofed src mac address with vlan id 10. Note: Even if it is judged that a frame should not be learned, it should not be dropped because it is destined for not forwarding layer but higher layer. See IEEE 802.1Q-2011 8.13.10. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02virtio-scsi: Enable DIF/DIX modes in SCSI host LLDNicholas Bellinger
This patch updates virtscsi_probe() to setup necessary Scsi_Host level protection resources. (currently hardcoded to 1) It changes virtscsi_add_cmd() to attach outgoing / incoming protection SGLs preceeding the data payload, and is using the new virtio_scsi_cmd_req_pi->pi_bytes[out,in] field to signal to signal to vhost/scsi bytes to expect for protection data. (Add missing #include <linux/blkdev.h> for blk_integrity - sfr + nab) Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-02vhost/scsi: Enable T10 PI IOV -> SGL memory mappingNicholas Bellinger
This patch updates vhost_scsi_handle_vq() to check for the existance of virtio_scsi_cmd_req_pi comparing vq->iov[0].iov_len in order to calculate seperate data + protection SGLs from data_num. Also update tcm_vhost_submission_work() to pass the pre-allocated cmd->tvc_prot_sgl[] memory into target_submit_cmd_map_sgls(), and update vhost_scsi_get_tag() parameters to accept scsi_tag, lun, and task_attr. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-02vhost/scsi: Add T10 PI IOV -> SGL memory mapping logicNicholas Bellinger
This patch adds vhost_scsi_map_iov_to_prot() to perform the mapping of T10 data integrity memory between virtio iov + struct scatterlist using get_user_pages_fast() following existing code. As with vhost_scsi_map_iov_to_sgl(), this does sanity checks against the total prot_sgl_count vs. pre-allocated SGLs, and loops across protection iovs using vhost_scsi_map_to_sgl() to perform the actual memory mapping. Also update tcm_vhost_release_cmd() to release associated tvc_prot_sgl[] struct page. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-02vhost/scsi: Add preallocation of protection SGLsNicholas Bellinger
This patch updates tcm_vhost_make_nexus() to pre-allocate per descriptor tcm_vhost_cmd->tvc_prot_sgl[] used to expose protection SGLs from within virtio-scsi guest memory to vhost-scsi. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-02vhost/scsi: Move sanity check into vhost_scsi_map_iov_to_sglNicholas Bellinger
Move the overflow check for sgl_count > TCM_VHOST_PREALLOC_SGLS into vhost_scsi_map_iov_to_sgl() so that it's based on the total number of SGLs for all IOVs, instead of single IOVs. Also, rename TCM_VHOST_PREALLOC_PAGES -> TCM_VHOST_PREALLOC_UPAGES to better describe pointers to user-space pages. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-02virtio-scsi.h: Add virtio_scsi_cmd_req_pi + VIRTIO_SCSI_F_T10_PI bitsNicholas Bellinger
This patch adds a virtio_scsi_cmd_req_pi header as recommened by Paolo that contains pi_bytesout + pi_bytesin elements used for signaling when protection information buffers (in bytes) are expected to preceed the data payload buffers. Also add new VIRTIO_SCSI_F_T10_PI feature bit to be used to signal host support. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-02Merge tag 'pci-v3.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into next Pull PCI changes from Bjorn Helgaas: "Enumeration - Notify driver before and after device reset (Keith Busch) - Use reset notification in NVMe (Keith Busch) NUMA - Warn if we have to guess host bridge node information (Myron Stowe) - Work around AMD Fam15h BIOSes that fail to provide _PXM (Suravee Suthikulpanit) - Clean up and mark early_root_info_init() as deprecated (Suravee Suthikulpanit) Driver binding - Add "driver_override" for force specific binding (Alex Williamson) - Fail "new_id" addition for devices we already know about (Bandan Das) Resource management - Support BAR sizes up to 8GB (Nikhil Rao, Alan Cox) - Don't move IORESOURCE_PCI_FIXED resources (Bjorn Helgaas) - Mark SBx00 HPET BAR as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Fail safely if we can't handle BARs larger than 4GB (Bjorn Helgaas) - Reject BAR above 4GB if dma_addr_t is too small (Bjorn Helgaas) - Don't convert BAR address to resource if dma_addr_t is too small (Bjorn Helgaas) - Don't set BAR to zero if dma_addr_t is too small (Bjorn Helgaas) - Don't print anything while decoding is disabled (Bjorn Helgaas) - Don't add disabled subtractive decode bus resources (Bjorn Helgaas) - Add resource allocation comments (Bjorn Helgaas) - Restrict 64-bit prefetchable bridge windows to 64-bit resources (Yinghai Lu) - Assign i82875p_edac PCI resources before adding device (Yinghai Lu) PCI device hotplug - Remove unnecessary "dev->bus" test (Bjorn Helgaas) - Use PCI_EXP_SLTCAP_PSN define (Bjorn Helgaas) - Fix rphahp endianess issues (Laurent Dufour) - Acknowledge spurious "cmd completed" event (Rajat Jain) - Allow hotplug service drivers to operate in polling mode (Rajat Jain) - Fix cpqphp possible NULL dereference (Rickard Strandqvist) MSI - Replace pci_enable_msi_block() by pci_enable_msi_exact() (Alexander Gordeev) - Replace pci_enable_msix() by pci_enable_msix_exact() (Alexander Gordeev) - Simplify populate_msi_sysfs() (Jan Beulich) Virtualization - Add Intel Patsburg (X79) root port ACS quirk (Alex Williamson) - Mark RTL8110SC INTx masking as broken (Alex Williamson) Generic host bridge driver - Add generic PCI host controller driver (Will Deacon) Freescale i.MX6 - Use new clock names (Lucas Stach) - Drop old IRQ mapping (Lucas Stach) - Remove optional (and unused) IRQs (Lucas Stach) - Add support for MSI (Lucas Stach) - Fix imx6_add_pcie_port() section mismatch warning (Sachin Kamat) Renesas R-Car - Add gen2 device tree support (Ben Dooks) - Use new OF interrupt mapping when possible (Lucas Stach) - Add PCIe driver (Phil Edworthy) - Add PCIe MSI support (Phil Edworthy) - Add PCIe device tree bindings (Phil Edworthy) Samsung Exynos - Remove unnecessary OOM messages (Jingoo Han) - Fix add_pcie_port() section mismatch warning (Sachin Kamat) Synopsys DesignWare - Make MSI ISR shared IRQ aware (Lucas Stach) Miscellaneous - Check for broken config space aliasing (Alex Williamson) - Update email address (Ben Hutchings) - Fix Broadcom CNB20LE unintended sign extension (Bjorn Helgaas) - Fix incorrect vgaarb conditional in WARN_ON() (Bjorn Helgaas) - Remove unnecessary __ref annotations (Bjorn Helgaas) - Add arch/x86/kernel/quirks.c to MAINTAINERS PCI file patterns (Bjorn Helgaas) - Fix use of uninitialized MPS value (Bjorn Helgaas) - Tidy x86/gart messages (Bjorn Helgaas) - Fix return value from pci_user_{read,write}_config_*() (Gavin Shan) - Turn pcibios_penalize_isa_irq() into a weak function (Hanjun Guo) - Remove unused serial device IDs (Jean Delvare) - Use designated initialization in PCI_VDEVICE (Mark Rustad) - Fix powerpc NULL dereference in pci_root_buses traversal (Mike Qiu) - Configure MPS on ARM (Murali Karicheri) - Remove unnecessary includes of <linux/init.h> (Paul Gortmaker) - Move Open Firmware devspec attribute to PCI common code (Sebastian Ott) - Use pdev->dev.groups for attribute creation on s390 (Sebastian Ott) - Remove pcibios_add_platform_entries() (Sebastian Ott) - Add new ID for Intel GPU "spurious interrupt" quirk (Thomas Jarosch) - Rename pci_is_bridge() to pci_has_subordinate() (Yijing Wang) - Add and use new pci_is_bridge() interface (Yijing Wang) - Make pci_bus_add_device() void (Yijing Wang) DMA API - Clarify physical/bus address distinction in docs (Bjorn Helgaas) - Fix typos in docs (Emilio López) - Update dma_pool_create ()and dma_pool_alloc() descriptions (Gioh Kim) - Change dma_declare_coherent_memory() CPU address to phys_addr_t (Bjorn Helgaas) - Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory() (Bjorn Helgaas)" * tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits) MAINTAINERS: Add generic PCI host controller driver PCI: generic: Add generic PCI host controller driver PCI: imx6: Add support for MSI PCI: designware: Make MSI ISR shared IRQ aware PCI: imx6: Remove optional (and unused) IRQs PCI: imx6: Drop old IRQ mapping PCI: imx6: Use new clock names i82875p_edac: Assign PCI resources before adding device ARM/PCI: Call pcie_bus_configure_settings() to set MPS PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning PCI: Make pci_bus_add_device() void PCI: exynos: Fix add_pcie_port() section mismatch warning PCI: Introduce new device binding path using pci_dev.driver_override PCI: rcar: Add gen2 device tree support PCI: cpqphp: Fix possible null pointer dereference PCI: rcar: Add R-Car PCIe device tree bindings PCI: rcar: Add MSI support for PCIe PCI: rcar: Add Renesas R-Car PCIe driver PCI: Fix return value from pci_user_{read,write}_config_*() PCI: exynos: Remove unnecessary OOM messages ...
2014-06-02Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-06-02 Please pull this remaining batch of updates intended for the 3.16 stream... For the mac80211 bits, Johannes says: "The remainder for -next right now is mostly fixes, and a handful of small new things like some CSA infrastructure, the regdb script mW/dBm conversion change and sending wiphy notifications." For the bluetooth bits, Gustavo says: "Some more patches for 3.16. There is nothing really special here, just a bunch of clean ups, fixes plus some small improvements. Please pull." For the nfc bits, Samuel says: "We have: - Felica (Type3) tags support for trf7970a - Type 4b tags support for port100 - st21nfca DTS typo fix - A few sparse warning fixes" For the atheros bits, Kalle says: "Ben added support for setting antenna configurations. Michal improved warm reset so that we would not need to fall back to cold reset that often, an issue where ath10k stripped protected flag while in monitor mode and made module initialisation asynchronous to fix the problems with firmware loading when the driver is linked to the kernel. Luca removed unused channel_switch_beacon callbacks both from ath9k and ath10k. Marek fixed Protected Management Frames (PMF) when using Action Frames. Also we had other small fixes everywhere in the driver." Along with that, there are a handful of updates to a variety of drivers. This includes updates to at76c50x-usb, ath9k, b43, brcmfmac, mwifiex, rsi, rtlwifi, and wil6210. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02netlink: rate-limit leftover bytes warning and print process nameMichal Schmidt
Any process is able to send netlink messages with leftover bytes. Make the warning rate-limited to prevent too much log spam. The warning is supposed to help find userspace bugs, so print the triggering command name to implicate the buggy program. [v2: Use pr_warn_ratelimited instead of printk_ratelimited.] Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02GFS2: Prevent recovery before the local journal is setBob Peterson
This patch uses a completion to prevent dlm's recovery process from referencing and trying to recover a journal before a journal has been opened. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-06-02inetpeer: get rid of ip_id_countEric Dumazet
Ideally, we would need to generate IP ID using a per destination IP generator. linux kernels used inet_peer cache for this purpose, but this had a huge cost on servers disabling MTU discovery. 1) each inet_peer struct consumes 192 bytes 2) inetpeer cache uses a binary tree of inet_peer structs, with a nominal size of ~66000 elements under load. 3) lookups in this tree are hitting a lot of cache lines, as tree depth is about 20. 4) If server deals with many tcp flows, we have a high probability of not finding the inet_peer, allocating a fresh one, inserting it in the tree with same initial ip_id_count, (cf secure_ip_id()) 5) We garbage collect inet_peer aggressively. IP ID generation do not have to be 'perfect' Goal is trying to avoid duplicates in a short period of time, so that reassembly units have a chance to complete reassembly of fragments belonging to one message before receiving other fragments with a recycled ID. We simply use an array of generators, and a Jenkin hash using the dst IP as a key. ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it belongs (it is only used from this file) secure_ip_id() and secure_ipv6_id() no longer are needed. Rename ip_select_ident_more() to ip_select_ident_segs() to avoid unnecessary decrement/increment of the number of segments. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02of: of_mdio: export symbol of_mdiobus_link_phydevDaniel Mack
Make of_mdiobus_link_phydev externally available. This fixes CONFIG_OF_MDIO=m. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 86f6cf41272 ("net: of_mdio: add of_mdiobus_link_phydev()") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02net: of_mdio: use int type for address variableDaniel Mack
Use int rather than u32 to fix the following warning: drivers/of/of_mdio.c:147 of_mdiobus_register() warn: unsigned 'addr' is never less than zero. Signed-off-by: Daniel Mack <zonque@gmail.com> Fixes: 8f8382888cba ("net: of_mdio: factor out code to parse a phy's 'reg' property") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02Merge branch 'netdevsync'David S. Miller
Alexander Duyck says: ==================== Provide common means for device address sync The following series implements a means for synchronizing both unicast and multicast addresses on a device interface. The code is based on the original implementation of dev_uc_sync that was available for syncing a VLAN to the lower dev. The original reason for coming up for this patch is a driver that is still in the early stages of development. The nearest driver I could find that appeared to have the same limitations as the driver I was working on was the Cisco enic driver. For this reason I chose it as the first driver to make use of this interface publicly. However, I do not have a Cisco enic interface so I have only been able to compile test any changes made to the driver. I tried to keep this change as simple as possible to avoid any issues. Any help with testing would be greatly appreciated. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02enic: Update driver to use __dev_uc/mc_sync/unsync callsAlexander Duyck
This change updates the enic driver to make use of __dev_uc_sync and __dev_mc_sync calls. Previously the driver was doing its own list management by storing the mc_addr and uc_addr list in a 32 address array. With this change the sync data is stored in the netdev_addr_list structures and instead we just track how many addresses we have written to the device. When we encounter 32 we stop and print a message as occurred previously with the old approach. Other than the core change the only other bit needed was to propagate the constant attribute with the MAC address as there were several spots where is twas only passed as a u8 * instead of a const u8 *. This patch is meant to maintain the original functionality without the use of the mc_addr and uc_addr arrays. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02net: Add support for device specific address syncingAlexander Duyck
This change provides a function to be used in order to break the ndo_set_rx_mode call into a set of address add and remove calls. The code is based on the implementation of dev_uc_sync/dev_mc_sync. Since they essentially do the same thing but with only one dev I simply named my functions __dev_uc_sync/__dev_mc_sync. I also implemented an unsync version of the functions as well to allow for cleanup on close. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02Merge branch '6lowpan-next'David S. Miller
Alexander Aring says: ==================== 6lowpan: fragmentation fixes This patch series fix the 6LoWPAN fragmentation which are in two cases broken. The first case is if we have exactly two 6LoWPAN fragments only. This is fixed by patch "6lowpan_rtnl: fix fragmentation with two fragments". The second case is a off by one issue if we have payload which hits the fragment boundary. Both issues are introduced by commit d4b2816d67d6e07b2f27037f282d8db03a5829d7 ("6lowpan: fix fragmentation"). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-026lowpan_rtnl: fix off by one while fragmentationAlexander Aring
This patch fix a off by one error while fragmentation. If the frag_cap value is equal to skb_unprocessed value we need to stop the fragmentation loop because the last fragment which has a size of skb_unprocessed fits into the frag capability size. This issue was introduced by commit d4b2816d67d6e07b2f27037f282d8db03a5829d7 ("6lowpan: fix fragmentation"). Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-026lowpan_rtnl: fix fragmentation with two fragmentsAlexander Aring
This patch fix the 6LoWPAN fragmentation for the case if we have exactly two fragments. The problem is that the (skb_unprocessed >= frag_cap) condition is always false on the second fragment after sending the first fragment. A fragmentation with only one fragment doesn't make any sense. The solution is that we use a do while loop here, that ensures we sending always a minimum of two fragments if we need a fragmentation. This issue was introduced by commit d4b2816d67d6e07b2f27037f282d8db03a5829d7 ("6lowpan: fix fragmentation"). Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02stmmac: Remove spin_lock call in stmmac_get_pauseparam()Emil Goode
The following patch removed unnecessary spin_lock/unlock calls in ethtool_ops callback functions. In the second and final version of the patch one spin_lock call was left behind. commit cab6715c3e8029e98b0b5d4056ceda007c0f6380 Author: Yang Wei <Wei.Yang@windriver.com> Date: Sun May 25 09:53:44 2014 +0800 net: driver: stmicro: Remove some useless the lock protection This introduced the following sparse warning: drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c:424:1: warning: context imbalance in 'stmmac_get_pauseparam' - different lock contexts for basic block Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02genetlink: remove superfluous assignmentDenis ChengRq
the local variable ops and n_ops were just read out from family, and not changed, hence no need to assign back. Validation functions should operate on const parameters and not change anything. Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02i2c: Make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. For example, k.alloc and v.alloc failures use dump_stack(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: designware-pci: Add Haswell PCI IDsMika Westerberg
Intel Haswell has the same I2C host controller than Baytrail and it can also be enumerated as a PCI device. Add the PCI IDs to the driver list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: designware: Add runtime PM hooksMika Westerberg
It is possible that after entering runtime PM suspend the controller context is lost due the fact that its power is removed. This happens for example on Asus T100, an Intel Baytrail based tablet/laptop. In order to get the controller back to functional state, we need to implement runtime PM hooks which will re-initialize the hardware during runtime PM resume. We can re-use the existing system suspend hooks as the steps to resume/suspend the controller are the same. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: designware: Disable device on system suspendMika Westerberg
Userspace can initiate system suspend on arbitrary times which means that device drivers must make sure that their device gets quiesced before system suspend is entered. Therefore disable the I2C host controller in the driver system suspend hook. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: nuc900: remove driverWolfram Sang
Arnd said in another patch: "As far as I can tell, this driver must have produced this error for as long as it has been merged into the mainline kernel, but it was never part of the normal build tests: drivers/i2c/busses/i2c-nuc900.c: In function 'nuc900_i2c_probe': drivers/i2c/busses/i2c-nuc900.c:601:17: error: request for member 'apbfreq' in something not a structure or union ret = (i2c->clk.apbfreq)/(pdata->bus_freq * 5) - 1; ^ This is an attempt to get the driver to build and possibly work correctly, although I do wonder whether we should just remove it, as it has clearly never worked." I agree with removing it since nobody showed interest in Arnd's fixup patch. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: Wan ZongShun <mcuos.com@gmail.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-06-02i2c: imx: update i2c clock divider for each transactionFugang Duan
Since IMX serial SOCs support low bus freq mode, some clocks freq may change to save power. I2C needs to check the clock source and update the divider. For example: i.MX6SL I2C clk is from IPG_PERCLK which is sourced from IPG_CLK. Under normal operation, IPG_CLK is 66MHz, ipg_perclk is at 22MHz. In low bus freq mode, IPG_CLK is at 12MHz and IPG_PERCLK is down to 4MHz. So the I2C driver must update the divider register for each transaction when the current IPG_PERCLK is not equal to the clock of previous transaction. Signed-off-by: Fugang Duan <B38611@freescale.com> [wsa: removed an outdated comment and simplified debug output] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: imx: fix the i2c bus hang issue when do repeat restartFugang Duan
Test i2c device Maxim max44009, datasheet is located at: http://www.maximintegrated.com/datasheet/index.mvp/id/7175 The max44009 support repeat operation like: read -> repeat restart -> read/write The current i2c imx host controller driver don't support this operation that causes i2c bus hang due to "MTX" is cleared in .i2c_imx_read(). If "read" is the last message there have no problem, so the current driver supports all SMbus operation like: write -> repeat restart -> read/write IMX i2c controller for master receiver has some limitation: - If it is the last byte for one operation, it must generate STOP signal before read I2DR to prevent controller from generating another clock cycle. - If it is the last byte in the read, and then do repeat restart, it must set "MTX" before read I2DR to prevent controller from generating another extra clock cycle. The patch is to fix the issue. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02qla2xxx: fix sparse warnings introduced by previous target mode t10-dif patchQuinn Tran
Fix sparse warnings introduce by "qla2xxx: T10-Dif: add T10-PI support". Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Update lpfc version to driver version 10.2.8001.0James Smart
Update lpfc version to driver version 10.2.8001.0 Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Fix ExpressLane priority setupJames Smart
Fix ExpressLane priority setup Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: mark old devices as obsoleteJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Fix for initializing RRQ bitmapJames Smart
Fix for initializing RRQ bitmap Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Fix for cleaning up stale ring flag and sp_queue_event entriesJames Smart
Fix for cleaning up stale ring flag and sp_queue_event entries. Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02Merge branch 'for-3.16/core' of git://git.kernel.dk/linux-block into nextLinus Torvalds
Pull block core updates from Jens Axboe: "It's a big(ish) round this time, lots of development effort has gone into blk-mq in the last 3 months. Generally we're heading to where 3.16 will be a feature complete and performant blk-mq. scsi-mq is progressing nicely and will hopefully be in 3.17. A nvme port is in progress, and the Micron pci-e flash driver, mtip32xx, is converted and will be sent in with the driver pull request for 3.16. This pull request contains: - Lots of prep and support patches for scsi-mq have been integrated. All from Christoph. - API and code cleanups for blk-mq from Christoph. - Lots of good corner case and error handling cleanup fixes for blk-mq from Ming Lei. - A flew of blk-mq updates from me: * Provide strict mappings so that the driver can rely on the CPU to queue mapping. This enables optimizations in the driver. * Provided a bitmap tagging instead of percpu_ida, which never really worked well for blk-mq. percpu_ida relies on the fact that we have a lot more tags available than we really need, it fails miserably for cases where we exhaust (or are close to exhausting) the tag space. * Provide sane support for shared tag maps, as utilized by scsi-mq * Various fixes for IO timeouts. * API cleanups, and lots of perf tweaks and optimizations. - Remove 'buffer' from struct request. This is ancient code, from when requests were always virtually mapped. Kill it, to reclaim some space in struct request. From me. - Remove 'magic' from blk_plug. Since we store these on the stack and since we've never caught any actual bugs with this, lets just get rid of it. From me. - Only call part_in_flight() once for IO completion, as includes two atomic reads. Hopefully we'll get a better implementation soon, as the part IO stats are now one of the more expensive parts of doing IO on blk-mq. From me. - File migration of block code from {mm,fs}/ to block/. This includes bio.c, bio-integrity.c, bounce.c, and ioprio.c. From me, from a discussion on lkml. That should describe the meat of the pull request. Also has various little fixes and cleanups from Dave Jones, Shaohua Li, Duan Jiong, Fengguang Wu, Fabian Frederick, Randy Dunlap, Robert Elliott, and Sam Bradshaw" * 'for-3.16/core' of git://git.kernel.dk/linux-block: (100 commits) blk-mq: push IPI or local end_io decision to __blk_mq_complete_request() blk-mq: remember to start timeout handler for direct queue block: ensure that the timer is always added blk-mq: blk_mq_unregister_hctx() can be static blk-mq: make the sysfs mq/ layout reflect current mappings blk-mq: blk_mq_tag_to_rq should handle flush request block: remove dead code in scsi_ioctl:blk_verify_command blk-mq: request initialization optimizations block: add queue flag for disabling SG merging block: remove 'magic' from struct blk_plug blk-mq: remove alloc_hctx and free_hctx methods blk-mq: add file comments and update copyright notices blk-mq: remove blk_mq_alloc_request_pinned blk-mq: do not use blk_mq_alloc_request_pinned in blk_mq_map_request blk-mq: remove blk_mq_wait_for_tags blk-mq: initialize request in __blk_mq_alloc_request blk-mq: merge blk_mq_alloc_reserved_request into blk_mq_alloc_request blk-mq: add helper to insert requests from irq context blk-mq: remove stale comment for blk_mq_complete_request() blk-mq: allow non-softirq completions ...
2014-06-02lpfc: Update lpfc version to driver version 10.2.8000.0James Smart
Update lpfc version to driver version 10.2.8000.0 Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Update Copyright on changed files from 8.3.45 patchesJames Smart
Update Copyright on changed files from 8.3.45 patches Missed this in the 8.3.45 push Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Update Copyright on changed filesJames Smart
Update Copyright on changed files Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Fixed locking for scsi task management commandsJames Smart
Fixed locking for scsi task management commands. Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-02lpfc: Convert runtime references to old xlane cfg param to fof cfg paramJames Smart
Convert runtime references to old xlane cfg param to fof cfg param Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit (git 2.34.1) at 2025-09-23 03:06:29 +0000