summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-12-21OMAP2+: hwmod: upgrade per-hwmod mutex to a spinlockPaul Walmsley
Change the per-hwmod mutex to a spinlock. (The per-hwmod lock serializes most post-initialization hwmod operations such as enable, idle, and shutdown.) Spinlocks are needed, because in some cases, hwmods must be enabled from timer interrupt disabled-context, such as an ISR. The current use-case that is driving this is the OMAP GPIO block ISR: it can trigger interrupts even with its clocks disabled, but these clocks are needed for register accesses in the ISR to succeed. This patch also effectively reverts commit 848240223c35fcc71c424ad51a8e8aef42d3879c - this patch makes _omap_hwmod_enable() and _omap_hwmod_init() static, renames them back to _enable() and _idle(), and changes their callers to call the spinlocking versions. Previously, since omap_hwmod_{enable,init}() attempted to take mutexes, these functions could not be called while the timer interrupt was disabled; but now that the functions use spinlocks and save and restore the IRQ state, it is appropriate to call them directly. Kevin Hilman <khilman@deeprootsystems.com> originally proposed this patch - thanks Kevin. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-12-21OMAP2+: hwmod: add support for per-class custom device reset functionsPaul Walmsley
The standard omap_hwmod.c _reset() code relies on an IP block's OCP_SYSCONFIG.SOFTRESET register bit to reset the IP block. This works for most IP blocks on the chip, but unfortunately not all. For example, initiator-only IP blocks often don't have any MPU-accessible OCP-header registers, and therefore the MPU can't write to any OCP_SYSCONFIG registers in that block. Other IP blocks, such as the IVA and I2C, require a specialized reset sequence. Since we need to be able to reset these IP blocks as well, allow custom IP block reset functions to be passed into the hwmod code via a per-hwmod-class reset function pointer, struct omap_hwmod_class.reset. If .reset is non-null, then the hwmod _reset() code will call the custom function instead of the standard OCP SOFTRESET-based code. As part of this change, rename most of the existing _reset() function code to _ocp_softreset(), to indicate more clearly that it does not work for all cases. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Paul Hunt <hunt@ti.com> Cc: Stanley Liu <stanley_liu@ti.com>
2010-12-21OMAP2+: hwmod: add postsetup statePaul Walmsley
Allow board files and OMAP core code to control the state that some or all of the hwmods end up in at the end of _setup() (called by omap_hwmod_late_init() ). Reimplement the old skip_setup_idle code in terms of this new postsetup state code. There are two use-cases for this patch: the !CONFIG_PM_RUNTIME case, in which all IP blocks should stay enabled after _setup() finishes; and the MPU watchdog case, in which the watchdog IP block should enter idle if watchdog coverage of kernel initialization is desired, and should be disabled otherwise. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Charulatha Varadarajan <charu@ti.com>
2010-12-21OMAP2+: hwmod: allow custom pre-shutdown functionsPaul Walmsley
Some OMAP IP blocks, such as the watchdog timers, cannot be completely shut down via the standard hwmod shutdown mechanism. This patch enables the hwmod data files to supply a pointer to a custom pre-shutdown function via the struct omap_hwmod_class.pre_shutdown function pointer. If the struct omap_hwmod_class.pre_shutdown function pointer is non-null, the function will be executed before the existing hwmod shutdown code runs. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
2010-12-21OMAP2+: io: split omap2_init_common_hw()Paul Walmsley
Split omap2_init_common_hw() into two functions. The first, omap2_init_common_infrastructure(), initializes the hwmod code and data, the OMAP PM code, and the clock code and data. The second, omap2_init_common_devices(), handles any other early device initialization that, for whatever reason, has not been or cannot be moved to initcalls or early platform devices. This patch is required for the hwmod postsetup patch, which allows board files to change the state that hwmods should be placed into at the conclusion of the hwmod _setup() function. For example, for a board whose creators wish to ensure watchdog coverage across the entire kernel boot process, code to change the watchdog's postsetup state will be added in the board-*.c file between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP4: Pandaboard: Fix MMC card detect gpio lineRaghuveer Murthy
commit bf56f0a6668cd (2.6.37-rc1), from Nishanth Menon attempted to fix card detection for PandaBoard, unfortunately, the fix missed to initialize .gpio_cd member of omap2_hsmmc_info. This results in a default value of '0', which is a valid GPIO line. On PandaBoard, the side effect of this is that GPIO line 0 controls the powering TFP410 DVI chip, and without the fix DVI chip is inadvertently powered. Tested-by: David Anders <x0132446@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Raghuveer Murthy <raghuveer.murthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP3: Devkit8000: Add DEBUG_LL supportThomas Weber
Add support for DEBUG_LL for Devkit8000. Devkit8000 uses uart 3 for debug output. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP2: Devkit8000: Use _cansleep GPIO functions for displayreset linesDaniel Morsing
The display reset lines are connected to a TPS65930 which may sleep when changing GPIO values. Use the appropriate function to silence a nasty warning from gpiolib. Signed-off-by: Daniel Morsing <daniel.morsing@gmail.com> Acked-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21Merge branch 'pm-opp' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2010-12-21Merge branch 'pm-next' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2010-12-21Merge branch 'devel-dma' into omap-for-linusTony Lindgren
2010-12-22drm: Include the connector name in the output_poll_execute() debug messageChris Wilson
Always useful to know just which connector was polled and had its status updated. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21OMAP3: ASM sleep code format reworkJean Pihet
Cosmetic fixes to the code: - white spaces and tabs, - alignement, - comments rephrase and typos, - multi-line comments Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: add comments for low power code errataJean Pihet
Errata covered: - 1.157 & 1.185 - i443 - i581 Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: rework of the ASM sleep code execution pathsJean Pihet
- Reworked and simplified the execution paths for better readability and to avoid duplication of code, - Added comments on the entry and exit points and the interaction with the ROM code for OFF mode restore, - Reworked the existing comments for better readability. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: re-organize the ASM sleep codeJean Pihet
Organize the code in the following sections: - register access macros, - API functions, - internal functions. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: remove hardcoded values from the ASM sleep codeJean Pihet
Using macros from existing include files for registers addresses. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Based on original patch from Vishwa. Signed-off-by: Jean Pihet <j-pihet@ti.com> Cc: Vishwanath BS <vishwanath.bs@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP2+: use global values for the SRAM PA addressesJean Pihet
The SRAM PA addresses are locally defined and used at different places, i.e. SRAM management code and idle sleep code. The macros are now defined at a centralized place, for easier maintenance. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon<nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: remove unused code from the ASM sleep codeJean Pihet
Remove unused code: - macros, - variables, - unused semaphore locking API. This API shall be added back when needed, - infinite loops for debug. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Tested-by: Nishanth Menon<nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2Eduardo Valentin
Limitation i583: Self_Refresh Exit issue after OFF mode Issue: When device is waking up from OFF mode, then SDRC state machine sends inappropriate sequence violating JEDEC standards. Impact: OMAP3630 < ES1.2 is impacted as follows depending on the platform: CS0: for 38.4MHz as internal sysclk, DDR content seen to be stable, while for all other sysclk frequencies, varied levels of instability seen based on varied parameters. CS1: impacted This patch takes option #3 as recommended by the Silicon erratum: Avoid core power domain transitioning to OFF mode. Power consumption impact is expected in this case. To do this, we route core OFF requests to RET request on the impacted revisions of silicon. Acked-by: Jean Pihet <j-pihet@ti.com> [nm@ti.com: rebased the code to 2.6.37-rc2- short circuit code changed a bit] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_modeNishanth Menon
Currently omap3_cpuidle_update_states makes whole sale decision on which C states to update based on enable_off_mode variable Instead, achieve the same functionality by independently providing mpu and core deepest states the system is allowed to achieve and update the idle states accordingly. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> [khilman: fixed additional user of this API in OMAP CPUidle driver] Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3630: PM: Disable L2 cache while invalidating L2 cachePeter 'p2' De Schrijver
While coming out of MPU OSWR/OFF states, L2 controller is reseted. The reset behavior is implementation specific as per ARMv7 TRM and hence $L2 needs to be invalidated before it's use. Since the AUXCTRL register is also reconfigured, disable L2 cache before invalidating it and re-enables it afterwards. This is as per Cortex-A8 ARM documentation. Currently this is identified as being needed on OMAP3630 as the disable/enable is done from "public side" while, on OMAP3430, this is done in the "secure side". Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [nm@ti.com: ported to 2.6.37-rc2, added hooks to enable the logic only on 3630] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3630: PM: Erratum i608: disable RTANishanth Menon
Erratum id: i608 RTA (Retention Till Access) feature is not supported and leads to device stability issues when enabled. This impacts modules with embedded memories on OMAP3630 Workaround is to disable RTA on boot and coming out of core off. For disabling RTA coming out of off mode, we do this by overriding the restore pointer for 3630 as the first point of entry before caches are touched and is common for GP and HS devices. To disable earlier than this could be possible by modifying the PPA for HS devices, but not for GP devices. Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [ambresh@ti.com: co-developer] Signed-off-by: Ambresh K <ambresh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: pm: introduce errata handlingNishanth Menon
Introduce errata handling for OMAP3. This patch introduces errata variable and stub for initialization which will be filled up by follow-on patches. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: PM: Erratum i581 support: dll kick strategyPeter 'p2' De Schrijver
Erratum i581 impacts OMAP3 platforms. PRCM DPLL control FSM removes SDRC_IDLEREQ before DPLL3 locks causing the DPLL not to be locked at times. IMPORTANT: *) This is not a complete workaround implementation as recommended by the silicon erratum. This is a support logic for detecting lockups and attempting to recover where possible and is known to provide stability in multiple platforms. *) This code is mostly important for inactive and retention. The ROM code waits for the maximum DLL lock time when resuming from off mode. So for off mode this code isn't really needed. *) counters are introduced here for eventual export to userspace once the cleanups are completed. This should eventually get refactored as part of cleanups to sleep34xx.S Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: PM: Update clean_l2 to use v7_flush_dcache_allRichard Woodruff
Analysis in TI kernel with ETM showed that using cache mapped flush in kernel instead of SO mapped flush cost drops by 65% (3.39mS down to 1.17mS) for clean_l2 which is used during sleep sequences. Overall: - speed up - unfortunately there isn't a good alternative flush method today - code reduction and less maintenance and potential bug in unmaintained code This also fixes the bug with the clean_l2 function usage. Reported-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> [nm@ti.com: ported rkw's proposal to 2.6.37-rc2] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-22drm/radeon/kms: fix bug in r600_gpu_is_lockupAlex Deucher
We were using the lockup struct from the wrong union. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-21OMAP3: remove OPP interfaces from OMAP PM layerKevin Hilman
With new OPP layer, OPP users will access OPP API directly instead of using OMAP PM layer, so remove all notions of OPPs from the OMAP PM layer. Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21omap4: opp: add OPP table dataNishanth Menon
This patch adds OPP tables for OMAP4. New file has been added to keep the OMAP4 opp tables and the registration of these tables with the generic opp framework by OMAP SoC OPP interface. Based on: http://dev.omapzoom.org/?p=santosh/kernel-omap4-base.git;a=blob;f=arch/arm/mach-omap2/opp44xx_data.c;h=252e3d0cb6050a64f390b9311c1c4977d74f762a;hb=refs/heads/omap4_next Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21omap: opp: add OMAP3 OPP table data and common initNishanth Menon
Add OPP data for OMAP34xx and OMAP36xx and initialization functions to populate OPP tables based on current SoC. introduce an OMAP generic opp initialization routine which OMAP3 and OMAP4+ SoCs can use to register their OPP definitions. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP: pm.c correct the initcall for an early init.Thara Gopinath
omap2_common_pm_init is the API where generic system devices like mpu, l3 etc get initialized. This has to happen really early on during the boot and not at a later time. This is especially important with the new opp changes as these devices need to be built before the opp tables init happen. Today both are device initcalls and it works just because of the order of compilation. Making this postcore_initcall is ideal because the omap device layer init happens as a core_initcall and typically rest of the driver/device inits are arch_initcall or something lower. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP2+: disable idle early in the suspend sequenceJean Pihet
Some bad interaction between the idle and the suspend paths has been identified: the idle code is called during the suspend enter and exit sequences. This could cause corruption or lock-up of resources. The solution is to move the calls to disable_hlt at the very beginning of the suspend sequence (ex. in omap3_pm_begin instead of omap3_pm_prepare), and the call to enable_hlt at the very end of the suspend sequence (ex. in omap3_pm_end instead of omap3_pm_finish). Tested with RET and OFF on Beagle and OMAP3EVM. Signed-off-by: Jean Pihet <j-pihet@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21Merge branch '20101221_static_const' of git://repo.or.cz/linux-2.6/trivial-modsDavid S. Miller
2010-12-21sundance: Program station address into HWDenis Kirjanov
Program adapter's StationAddress register when changing device MAC address Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21sundance: Wrap up acceess to ASICCtrl high word with a macroDenis Kirjanov
Wrap up acceess to ASICCtrl high word with a macro Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21perf probe: Fix to support libdwfl older than 0.148Masami Hiramatsu
Since the libdwfl library before 0.148 fails to analyze live kernel debuginfo, 'perf probe --list' compiled with those old libdwfl sometimes crashes. To avoid that bug, perf probe does not use libdwfl's live kernel analysis routine when it is compiled with older libdwfl. Side effect: perf with older libdwfl doesn't support listing probe in modules with source code line. Those could be shown by symbol+offset. Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20101217131218.24123.62424.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-21perf tools: Fix lazy wildcard matchingMasami Hiramatsu
Fix lazy wildcard matching to ignore space after wild card. Cc: 2nddept-manager@sdl.hitachi.co.jp Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20101217131200.24123.8202.stgit@ltc236.sdl.hitachi.co.jp> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-21net: Fix range checks in tcf_valid_offset().David S. Miller
This function has three bugs: 1) The offset should be valid most of the time, this is just a sanity check, therefore we should use "likely" not "unlikely" 2) This is the only place where we can check for arithmetic overflow of the pointer plus the length. 3) The existing range checks are off by one, the valid range is skb->head to skb_tail_pointer(), inclusive. Based almost entirely upon a patch by Ralph Loader. Reported-by: Ralph Loader <suckfish@ihug.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21filter: optimize accesses to ancillary dataEric Dumazet
We can translate pseudo load instructions at filter check time to dedicated instructions to speed up filtering and avoid one switch(). libpcap currently uses SKF_AD_PROTOCOL, but custom filters probably use other ancillary accesses. Note : I made the assertion that ancillary data was always accessed with BPF_LD|BPF_?|BPF_ABS instructions, not with BPF_LD|BPF_?|BPF_IND ones (offset given by K constant, not by K + X register) On x86_64, this saves a few bytes of text : # size net/core/filter.o.* text data bss dec hex filename 4864 0 0 4864 1300 net/core/filter.o.new 4944 0 0 4944 1350 net/core/filter.o.old Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21bnx2: remove cancel_work_sync() from remove_oneTejun Heo
Michael pointed out that bnx2_close() already cancels bp->reset_task and thus it is guaranteed to be idle when bnx2_remove_one() is called. Remove the unnecessary cancel_work_sync() in remove_one. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
2010-12-21OMAP2/3: OneNAND: add 104MHz supportAdrian Hunter
Add GPMC timings for 104MHz OneNAND. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP2/3: GPMC: put sync_clk value in picoseconds instead of nanosecondsAdrian Hunter
The calculations done with sync_clk are anyway in picoseconds and switching to picoseconds allows sync_clk values that are not a whole number of nanoseconds - which is sometimes the case. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21mmc: Fix re-probing with PM_POST_RESTORE notificationTakashi Iwai
In the error-path where PM notifies PM_POST_RESTORE, the rescan-blockage should be cleared as well. Otherwise it'll be never re-probed. Also, as a bonus, this fixes a bug in S4 with user-mode suspend in the current code, as it sends PM_POST_RESTORE instead of PM_POST_HIBERNATION wrongly. Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-21mmc: atmel-mci: fix multiblock SDIO transfersNicolas Ferre
Based on report made by Yauhen in: "MMC: Fix multiblock SDIO transfers in AT91 MCI" patch, I report those changes to the brother driver: atmel-mci. So, this patch sets SDIO transfer types: SDIO block and SDIO byte transfers instead of using ordinary MMC block transfers. It is checking opcode for SDIO CMD53 and setting transfer type in MCI_CMDR register properly. Reported-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> Cc: <stable@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-21mmc: at91_mci: fix multiblock SDIO transfersYauhen Kharuzhy
The AT91 MCI has special SDIO transfer types: SDIO block and SDIO byte transfers, but at91_mci driver doesn't use them and handles all SDIO transfers as ordinary MMC block transfers. This causes problems for multiple-block SDIO transfers (in particular for 256-bytes blocks). Fix this situation by checking the opcode for SDIO CMD53 and setting the transfer type in the AT91_MCI_CMDR register properly. This patch was tested with libertas SDIO driver: problem with TX timeouts on big packets was eliminated. Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com> Cc: <stable@kernel.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-21Linux 2.6.37-rc7v2.6.37-rc7Linus Torvalds
2010-12-21perf probe: Handle gracefully some stupid and buggy line syntaxesFranck Bui-Huu
Currently perf probe doesn't handle those incorrect syntaxes: $ perf probe -L sched.c:++13 $ perf probe -L sched.c:-+13 $ perf probe -L sched.c:10000000000000000000000000000+13 This patches rewrites parse_line_range_desc() to handle them. As a bonus, it reports more useful error messages instead of: "Tailing with invalid character...". Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> LKML-Reference: <1292854685-8230-7-git-send-email-fbuihuu@gmail.com> Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-21Merge branch 'msm-usb' into for-nextDavid Brown
* msm-usb: MSM: Add USB support for MSM7x30 MSM: Add USB suport for QSD8x50
2010-12-21stmmac: unwind properly in stmmac_dvr_probe()Dan Carpenter
The original code had a several problems: *) It had potential null dereferences of "priv" and "res". *) It released the memory region before it was aquired. *) It didn't free "ndev" after it was allocated. *) It didn't call unregister_netdev() after calling stmmac_probe(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-18 19:45:21 +0000