summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-13clk: qcom: add video clock controller driver for SM8250Jonathan Marek
Add support for the video clock controller found on SM8250 based devices. Derived from the downstream driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200923160635.28370-6-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: qcom: add video clock controller driver for SM8150Jonathan Marek
Add support for the video clock controller found on SM8150 based devices. Derived from the downstream driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200923160635.28370-5-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13dt-bindings: clock: add SM8250 QCOM video clock bindingsJonathan Marek
Add device tree bindings for video clock controller for SM8250 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200923160635.28370-4-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13dt-bindings: clock: add SM8150 QCOM video clock bindingsJonathan Marek
Add device tree bindings for video clock controller for SM8150 SoCs. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200923160635.28370-3-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videoccJonathan Marek
These two bindings are almost identical, so combine them into one. This will make it easier to add the sm8150 and sm8250 videocc bindings. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200923160635.28370-2-jonathan@marek.ca Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCsKonrad Dybcio
This change adds GDSCs, resets and most of the missing clocks to the msm8994 GCC driver. The remaining ones are of local_vote_clk and gate_clk type, which are not yet supported upstream. Also reorder them to match the original downstream driver. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Link: https://lore.kernel.org/r/20201005145855.149206-1-konradybcio@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: meson: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1601233948-11629-11-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: mvebu: ap80x-cpu: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1601233948-11629-10-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: uniphier: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1601233948-11629-2-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13Merge branch ↵Jakub Kicinski
'net-add-and-use-function-dev_fetch_sw_netstats-for-fetching-pcpu_sw_netstats' Heiner Kallweit says: ==================== net: add and use function dev_fetch_sw_netstats for fetching pcpu_sw_netstats In several places the same code is used to populate rtnl_link_stats64 fields with data from pcpu_sw_netstats. Therefore factor out this code to a new function dev_fetch_sw_netstats(). ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13xfrm: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/a6b816f4-bbf2-9db0-d59a-7e4e9cc808fe@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net: openvswitch: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/5e52dc91-97b1-82b0-214b-65d404e4a2ec@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13mac80211: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/93dda477-70ae-0ccf-71b4-bfebb66c9beb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13iptunnel: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/050f9a83-b195-a3d6-edbd-91a59040be21@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net: dsa: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/b6047017-8226-6b7e-a3cd-064e69fdfa27@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net: bridge: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/d1c3ff29-5691-9d54-d164-16421905fa59@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13qtnfmac: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/166259f2-084c-45d7-e610-2de2a0bdae06@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net: usbnet: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/70ad3e33-8ea6-e12e-31de-5fec7a3c4f6e@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net: usb: qmi_wwan: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/2c97b75b-107e-0ab6-d9ef-9f38bb03f495@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net: macsec: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/0d81e0f7-7784-42df-8e10-d0b77ca5b7ee@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13IB/hfi1: use new function dev_fetch_sw_netstatsHeiner Kallweit
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/6cad1a04-f021-d94b-45fd-7cc7cf07367d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net: add function dev_fetch_sw_netstats for fetching pcpu_sw_netstatsHeiner Kallweit
In several places the same code is used to populate rtnl_link_stats64 fields with data from pcpu_sw_netstats. Therefore factor out this code to a new function dev_fetch_sw_netstats(). v2: - constify argument netstats - don't ignore netstats being NULL or an ERRPTR - switch to EXPORT_SYMBOL_GPL Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/6d16a338-52f5-df69-0020-6bc771a7d498@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13virtio-net: ethtool configurable RXCSUMTonghao Zhang
Allow user configuring RXCSUM separately with ethtool -K, reusing the existing virtnet_set_guest_offloads helper that configures RXCSUM for XDP. This is conditional on VIRTIO_NET_F_CTRL_GUEST_OFFLOADS. If Rx checksum is disabled, LRO should also be disabled. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20201012015820.62042-1-xiangxia.m.yue@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13remoteproc: Add recovery configuration to the sysfs interfaceRishabh Bhatnagar
Add recovery configuration to the sysfs interface. This will allow usage of this configuration feature in production devices where access to debugfs might be limited. Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/1601662144-5964-4-git-send-email-rishabhb@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-13remoteproc: Add coredump as part of sysfs interfaceRishabh Bhatnagar
Add coredump as part of the sysfs interface. This will allow usage of this configuration feature in production devices where access to debugfs might be limited. Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/1601662144-5964-3-git-send-email-rishabhb@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-13net/af_unix: Remove unused old_pid variableOr Cohen
Commit 109f6e39fa07c48f5801 ("af_unix: Allow SO_PEERCRED to work across namespaces.") introduced the old_pid variable in unix_listen, but it's never used. Remove the declaration and the call to put_pid. Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com> Link: https://lore.kernel.org/r/20201011153527.18628-1-orcohen@paloaltonetworks.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13remoteproc: Change default dump configuration to "disabled"Rishabh Bhatnagar
Currently "default" configuration option means coredumps are enabled. To avoid confusion rename the "default" configuration option to "enabled" and disable collection of dumps by default as doing so makes sense for production devices. Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/1601662144-5964-2-git-send-email-rishabhb@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-13socket: don't clear SOCK_TSTAMP_NEW when SO_TIMESTAMPNS is disabledChristian Eggers
SOCK_TSTAMP_NEW (timespec64 instead of timespec) is also used for hardware time stamps (configured via SO_TIMESTAMPING_NEW). User space (ptp4l) first configures hardware time stamping via SO_TIMESTAMPING_NEW which sets SOCK_TSTAMP_NEW. In the next step, ptp4l disables SO_TIMESTAMPNS(_NEW) (software time stamps), but this must not switch hardware time stamps back to "32 bit mode". This problem happens on 32 bit platforms were the libc has already switched to struct timespec64 (from SO_TIMExxx_OLD to SO_TIMExxx_NEW socket options). ptp4l complains with "missing timestamp on transmitted peer delay request" because the wrong format is received (and discarded). Fixes: 887feae36aee ("socket: Add SO_TIMESTAMP[NS]_NEW") Fixes: 783da70e8396 ("net: add sock_enable_timestamps") Signed-off-by: Christian Eggers <ceggers@arri.de> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13socket: fix option SO_TIMESTAMPING_NEWChristian Eggers
The comparison of optname with SO_TIMESTAMPING_NEW is wrong way around, so SOCK_TSTAMP_NEW will first be set and than reset again. Additionally move it out of the test for SOF_TIMESTAMPING_RX_SOFTWARE as this seems unrelated. This problem happens on 32 bit platforms were the libc has already switched to struct timespec64 (from SO_TIMExxx_OLD to SO_TIMExxx_NEW socket options). ptp4l complains with "missing timestamp on transmitted peer delay request" because the wrong format is received (and discarded). Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Reviewed-by: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net/tls: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1602412498-32025-6-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net/ipv6: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/r/1602412498-32025-5-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13tcp: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1602412498-32025-4-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net: mscc: ocelot: remove duplicate ocelot_port_dev_checkVladimir Oltean
A helper for checking whether a net_device belongs to mscc_ocelot already existed and did not need to be rewritten. Use it. Fixes: 319e4dd11a20 ("net: mscc: ocelot: introduce conversion helpers between port and netdev") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20201011092041.3535101-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13Merge branch 'macb-support-the-2-deep-Tx-queue-on-at91'Jakub Kicinski
Willy Tarreau says: ==================== macb: support the 2-deep Tx queue on at91 while running some tests on my Breadbee board, I noticed poor network Tx performance. I had a look at the driver (macb, at91ether variant) and noticed that at91ether_start_xmit() immediately stops the queue after sending a frame and waits for the interrupt to restart the queue, causing a dead time after each packet is sent. The AT91RM9200 datasheet states that the controller supports two frames, one being sent and the other one being queued, so I performed minimal changes to support this. The transmit performance on my board has increased by 50% on medium-sized packets (HTTP traffic), and with large packets I can now reach line rate. Since this driver is shared by various platforms, I tried my best to isolate and limit the changes as much as possible and I think it's pretty reasonable as-is. I've run extensive tests and couldn't meet any unexpected situation (no stall, overflow nor lockup). There are 3 patches in this series. The first one adds the missing interrupt flag for RM9200 (TBRE, indicating the tx buffer is willing to take a new packet). The second one replaces the single skb with a 2-array and uses only index 0. It does no other change, this is just to prepare the code for the third one. The third one implements the queue. Packets are added at the tail of the queue, the queue is stopped at 2 packets and the interrupt releases 0, 1 or 2 depending on what the transmit status register reports. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13macb: support the two tx descriptors on at91rm9200Willy Tarreau
The at91rm9200 variant used by a few chips including the MSC313 supports two Tx descriptors (one frame being serialized and another one queued). However the driver only implemented a single one, which adds a dead time after each transfer to receive and process the interrupt and wake the queue up, preventing from reaching line rate. This patch implements a very basic 2-deep queue to address this limitation. The tests run on a Breadbee board equipped with an MSC313E show that at 1 GHz, HTTP traffic on medium-sized objects (45kB) was limited to exactly 50 Mbps before this patch, and jumped to 76 Mbps with this patch. And tests on a single TCP stream with an MTU of 576 jump from 10kpps to 15kpps. With 1500 byte packets it's now possible to reach line rate versus 75 Mbps before. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20201011090944.10607-4-w@1wt.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13macb: prepare at91 to use a 2-frame TX queueWilly Tarreau
The RM9200 supports one frame being sent while another one is waiting in queue. This avoids the dead time that follows the emission of a frame and which prevents one from reaching line speed. Right now the driver supports only a single skb, so we'll first replace the rm9200-specific skb info with an array of two macb_tx_skb (already used by other drivers). This patch only moves the skb_length to txq[0].size and skb_physaddr to skb[0].mapping but doesn't perform any other change. It already uses [desc] in order to minimize future changes. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20201011090944.10607-3-w@1wt.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13macb: add RM9200's interrupt flag TBREWilly Tarreau
Transmit Buffer Register Empty replaces TXERR on RM9200 and signals the sender may try to send again becase the last queued frame is no longer in queue (being transmitted or already transmitted). Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20201011090944.10607-2-w@1wt.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13Merge tag 'overflow-v5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow update from Kees Cook: "Just a single change to help enforce all callers are actually checking the results of the helpers" * tag 'overflow-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: overflow: Add __must_check attribute to check_*() helpers
2020-10-13remoteproc: k3-r5: Add loading support for on-chip SRAM regionsSuman Anna
The K3 SoCs has various internal on-chip SRAM memories like the SRAM within the MCU domain or the shared MSMC RAM within NavSS that can be used for multiple purposes. One such purpose is to have the R5F cores use a portion of such on-chip SRAM for fast-access data or to directly execute code. Add support to the K3 R5 remoteproc driver to parse and support loading into such memories. The SRAM regions need to be mapped as normal non-cacheable memory to avoid kernel crashes when the remoteproc loader code uses the Arm64 memset library function (the "DC ZVA" instruction throws a alignment fault on device type memory). These SRAM regions are completely optional as not all firmware images require these memories, and any such memory has to be reserved as such in the DTS files. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20201002234234.20704-5-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-13remoteproc: k3-r5: Initialize TCM memories for ECCSuman Anna
The R5F processors on K3 SoCs all have two TCMs (ATCM and BTCM) that support 32-bit ECC. The TCMs are typically loaded with some boot-up code to initialize the R5 MPUs to further execute code out of DDR. The ECC for the TCMs is enabled by default on K3 SoCs due to internal default tie-off values, but the TCM memories are not initialized on device power up. Any read access without the corresponding TCM memory location initialized will generate an ECC error, and any such access from a A72 or A53 core will trigger a SError. So, zero initialize both the TCM memories before loading any firmware onto a R5F in remoteproc mode. Any R5F booted from U-Boot/SPL would require a similar initialization in the bootloader. Note that both the TCMs are initialized unconditionally as the TCM enable config bits only manage the access and visibility from R5. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20201002234234.20704-4-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-13remoteproc: k3-r5: Add a remoteproc driver for R5F subsystemSuman Anna
The TI K3 family of SoCs typically have one or more dual-core Arm Cortex R5F processor clusters/subsystems (R5FSS). This R5F subsystem/cluster can be configured at boot time to be either run in a LockStep mode or in an Asymmetric Multi Processing (AMP) fashion in Split-mode. This subsystem has 64 KB each Tightly-Coupled Memory (TCM) internal memories for each core split between two banks - TCMA and TCMB (further interleaved into two banks). The subsystem does not have an MMU, but has a Region Address Translater (RAT) module that is accessible only from the R5Fs for providing translations between 32-bit CPU addresses into larger system bus addresses. Add a remoteproc driver to support this subsystem to be able to load and boot the R5F cores primarily in LockStep mode. The code also includes the base support for Split mode. Error Recovery and Power Management features are not currently supported. Loading support includes the internal TCMs and DDR. RAT support is left for a future patch, and as such the reserved memory carveout regions are all expected to be using memory regions within the first 2 GB. The R5F remote processors do not have an MMU, and so require fixed memory carveout regions matching the firmware image addresses. Support for this is provided by mandating multiple memory regions to be attached to the remoteproc device. The first memory region will be used to serve as the DMA pool for all dynamic allocations like the vrings and vring buffers. The remaining memory regions are mapped into the kernel at device probe time, and are used to provide address translations for firmware image segments without the need for any RSC_CARVEOUT entries. Any firmware image using memory outside of the supplied reserved memory carveout regions will be errored out. The R5F processors on TI K3 SoCs require a specific sequence for booting and shutting down the processors. This sequence is also dependent on the mode (LockStep or Split) the R5F cluster is configured for. The R5F cores have a Memory Protection Unit (MPU) that has a default configuration that does not allow the cores to run out of DDR out of reset. This is resolved by using the TCMs for boot-strapping code that applies the appropriate executable permissions on desired DDR memory. The loading into the TCMs requires that the resets be released first with the cores in halted state. The Power Sleep Controller (PSC) module on K3 SoCs requires that the cores be in WFI/WFE states with no active bus transactions before the cores can be put back into reset. Support for this is provided by using the newly introduced .prepare() and .unprepare() ops in the remoteproc core. The .prepare() ops is invoked before any loading, and the .unprepare() ops is invoked after the remoteproc resource cleanup. The R5F core resets are deasserted in .prepare() and asserted in .unprepare(), and the cores themselves are started and halted in .start() and .stop() ops. This ensures symmetric usage and allows the R5F cores state machine to be maintained properly between using the sysfs 'state' variable, bind/unbind and regular module load/unload flows. The subsystem is represented as a single remoteproc in LockStep mode, and as two remoteprocs in Split mode. The driver uses various TI-SCI interfaces to talk to the System Controller (DMSC) for managing configuration, power and reset management of these cores. IPC between the A53 cores and the R5 cores is supported through the virtio rpmsg stack using shared memory and OMAP Mailboxes. The AM65x SoCs typically have a single R5FSS in the MCU voltage domain. The J721E SoCs uses a slightly revised IP and typically have three R5FSSs, with one cluster present within the MCU voltage domain (MCU_R5FSS0), and the remaining two clusters present in the MAIN voltage domain (MAIN_R5FSS0 and MAIN_R5FSS1). The integration of these clusters on J721E SoC is also slightly different in that these IPs do support an actual local reset line, while they are a no-op on AM65x SoCs. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20201002234234.20704-3-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-13dt-bindings: remoteproc: Add bindings for R5F subsystem on TI K3 SoCsSuman Anna
The Texas Instruments K3 family of SoCs have one or more dual-core Arm Cortex R5F processor subsystems/clusters (R5FSS). The clusters can be split between multiple voltage domains as well. Add the device tree bindings document for these R5F subsystem devices. These R5F processors do not have an MMU, and so require fixed memory carveout regions matching the firmware image addresses. The nodes require more than one memory region, with the first memory region used for DMA allocations at runtime. The remaining memory regions are reserved and are used for the loading and running of the R5F remote processors. The R5F processors can also optionally use any internal on-chip SRAM memories either for executing code or using it as fast-access data. The added example illustrates the DT nodes for the single R5FSS device present on K3 AM65x family of SoCs. Signed-off-by: Suman Anna <s-anna@ti.com> Link: https://lore.kernel.org/r/20201002234234.20704-2-s-anna@ti.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-10-13Merge tag 'seccomp-v5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "The bulk of the changes are with the seccomp selftests to accommodate some powerpc-specific behavioral characteristics. Additional cleanups, fixes, and improvements are also included: - heavily refactor seccomp selftests (and clone3 selftests dependency) to fix powerpc (Kees Cook, Thadeu Lima de Souza Cascardo) - fix style issue in selftests (Zou Wei) - upgrade "unknown action" from KILL_THREAD to KILL_PROCESS (Rich Felker) - replace task_pt_regs(current) with current_pt_regs() (Denis Efremov) - fix corner-case race in USER_NOTIF (Jann Horn) - make CONFIG_SECCOMP no longer per-arch (YiFei Zhu)" * tag 'seccomp-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits) seccomp: Make duplicate listener detection non-racy seccomp: Move config option SECCOMP to arch/Kconfig selftests/clone3: Avoid OS-defined clone_args selftests/seccomp: powerpc: Set syscall return during ptrace syscall exit selftests/seccomp: Allow syscall nr and ret value to be set separately selftests/seccomp: Record syscall during ptrace entry selftests/seccomp: powerpc: Fix seccomp return value testing selftests/seccomp: Remove SYSCALL_NUM_RET_SHARE_REG in favor of SYSCALL_RET_SET selftests/seccomp: Avoid redundant register flushes selftests/seccomp: Convert REGSET calls into ARCH_GETREG/ARCH_SETREG selftests/seccomp: Convert HAVE_GETREG into ARCH_GETREG/ARCH_SETREG selftests/seccomp: Remove syscall setting #ifdefs selftests/seccomp: mips: Remove O32-specific macro selftests/seccomp: arm64: Define SYSCALL_NUM_SET macro selftests/seccomp: arm: Define SYSCALL_NUM_SET macro selftests/seccomp: mips: Define SYSCALL_NUM_SET macro selftests/seccomp: Provide generic syscall setting macro selftests/seccomp: Refactor arch register macros to avoid xtensa special case selftests/seccomp: Use __NR_mknodat instead of __NR_mknod selftests/seccomp: Use bitwise instead of arithmetic operator for flags ...
2020-10-13clk/qcom: fix spelling typoWang Qing
Modify the comment typo: "compliment" -> "complement". Signed-off-by: Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1600930506-394-1-git-send-email-wangqing@vivo.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13Merge tag 'selinux-pr-20201012' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "A decent number of SELinux patches for v5.10, twenty two in total. The highlights are listed below, but all of the patches pass our test suite and merge cleanly. - A number of changes to how the SELinux policy is loaded and managed inside the kernel with the goal of improving the atomicity of a SELinux policy load operation. These changes account for the bulk of the diffstat as well as the patch count. A special thanks to everyone who contributed patches and fixes for this work. - Convert the SELinux policy read-write lock to RCU. - A tracepoint was added for audited SELinux access control events; this should help provide a more unified backtrace across kernel and userspace. - Allow the removal of security.selinux xattrs when a SELinux policy is not loaded. - Enable policy capabilities in SELinux policies created with the scripts/selinux/mdp tool. - Provide some "no sooner than" dates for the SELinux checkreqprot sysfs deprecation" * tag 'selinux-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (22 commits) selinux: provide a "no sooner than" date for the checkreqprot removal selinux: Add helper functions to get and set checkreqprot selinux: access policycaps with READ_ONCE/WRITE_ONCE selinux: simplify away security_policydb_len() selinux: move policy mutex to selinux_state, use in lockdep checks selinux: fix error handling bugs in security_load_policy() selinux: convert policy read-write lock to RCU selinux: delete repeated words in comments selinux: add basic filtering for audit trace events selinux: add tracepoint on audited events selinux: Create new booleans and class dirs out of tree selinux: Standardize string literal usage for selinuxfs directory names selinux: Refactor selinuxfs directory populating functions selinux: Create function for selinuxfs directory cleanup selinux: permit removing security.selinux xattr before policy load selinux: fix memdup.cocci warnings selinux: avoid dereferencing the policy prior to initialization selinux: fix allocation failure check on newpolicy->sidtab selinux: refactor changing booleans selinux: move policy commit after updating selinuxfs ...
2020-10-14netfilter: nf_log: missing vlan offload tag and protoPablo Neira Ayuso
Dump vlan tag and proto for the usual vlan offload case if the NF_LOG_MACDECODE flag is set on. Without this information the logging is misleading as there is no reference to the VLAN header. [12716.993704] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0800 SRC=192.168.10.2 DST=172.217.168.163 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=2548 DF PROTO=TCP SPT=55848 DPT=80 WINDOW=501 RES=0x00 ACK FIN URGP=0 [12721.157643] test: IN=veth0 OUT= MACSRC=86:6c:92:ea:d6:73 MACDST=0e:3b:eb:86:73:76 VPROTO=8100 VID=10 MACPROTO=0806 ARP HTYPE=1 PTYPE=0x0800 OPCODE=2 MACSRC=86:6c:92:ea:d6:73 IPSRC=192.168.10.2 MACDST=0e:3b:eb:86:73:76 IPDST=192.168.10.1 Fixes: 83e96d443b37 ("netfilter: log: split family specific code to nf_log_{ip,ip6,common}.c files") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-13Merge tag 'audit-pr-20201012' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "A small set of audit patches for v5.10. There are only three patches in total, and all three are trivial fixes that don't really warrant any explanations beyond their descriptions. As usual, all three patches pass our test suite" * tag 'audit-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: Remove redundant null check audit: uninitialize variable audit_sig_sid audit: change unnecessary globals into statics
2020-10-13docs: networking: update XPS to account for netif_set_xps_queueWillem de Bruijn
With the introduction of netif_set_xps_queue, XPS can be enabled by the driver at initialization. Update the documentation to reflect this, as otherwise users may incorrectly believe that the feature is off by default. Fixes: 537c00de1c9b ("net: Add functions netif_reset_xps_queue and netif_set_xps_queue") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13Merge tag 'Smack-for-5.10' of git://github.com/cschaufler/smack-nextLinus Torvalds
Pull smack updates from Casey Schaufler: "Two minor fixes and one performance enhancement to Smack. The performance improvement is significant and the new code is more like its counterpart in SELinux. - Two kernel test robot suggested clean-ups. - Teach Smack to use the IPv4 netlabel cache. This results in a 12-14% improvement on TCP benchmarks" * tag 'Smack-for-5.10' of git://github.com/cschaufler/smack-next: Smack: Remove unnecessary variable initialization Smack: Fix build when NETWORK_SECMARK is not set Smack: Use the netlabel cache Smack: Set socket labels only once Smack: Consolidate uses of secmark into a function
2020-10-13Merge tag 'tomoyo-pr-20201012' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1Linus Torvalds
Pull tomoyo fix from Tetsuo HandaL "One patch to make it possible to execute usermode-driver's path" * tag 'tomoyo-pr-20201012' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: tomoyo: Loosen pathname/domainname validation.
generated by cgit (git 2.34.1) at 2025-09-16 09:02:11 +0000