| Age | Commit message (Collapse) | Author |
|---|
|
This mmap behavior caused unintended breakages so the behavior has been
changed.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240826-riscv_mmap-v1-1-cd8962afe47f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The rv1108-elgin-r1 board has an LCD controlled via SPI in userspace.
The marking on the LCD is JG10309-01.
Add the "elgin,jg10309-01" compatible string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240828180057.3167190-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to better handle the necessary DSB DEwake tricks let's
switch over to using a chained DSB for the actual LUT programming.
The CPU will start 'dsb_color_commit', which in turn will start the
chained 'dsb_color_vblank'.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-15-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
We'll soon utilize several DSBs during the commit. To that end
rename the current crtc_state->dsb to crtc_state->dsb_color_vblank
to better reflect its role (color managemnent stuff programmed during
vblank).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-14-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
In order to avoid the DSB keeping the DEwake permanently
asserted we must clear DSB_PMCTRL_2.DSB_FORCE_DEWAKE once
we are done. For good measure do the same for
DSB_PMCTRL.DSB_ENABLE_DEWAKE.
Experimentally this doens't seem to be actually necessary
(unlike with DSB_FORCE_DEWAKE). That is, the DSB_ENABLE_DEWAKE
doesn't seem to do anything whenever the DSB is not active.
But I'd hate to waste a ton of power in case there I'm wrong
and there is some way DEwake could remaing asserted. One extra
register write is a small price to pay for some peace of mind.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-13-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Allow intel_dsb_chain() to start the chained DSB
at start of the undelaye vblank. This is slightly
more involved than simply setting the bit as we
must use the DEwake mechanism to eliminate pkgC
latency.
And DSB_ENABLE_DEWAKE itself is problematic in that
it allows us to configure just a single scanline,
and if the current scanline is already past that
DSB_ENABLE_DEWAKE won't do anything, rendering the
whole thing moot.
The current workaround involves checking the pipe's current
scanline with the CPU, and if it looks like we're about to
miss the configured DEwake scanline we set DSB_FORCE_DEWAKE
to immediately assert DEwake. This is somewhat racy since the
hardware is making progress all the while we're checking it on
the CPU.
We can make things less racy by chaining two DSBs and handling
the DSB_FORCE_DEWAKE stuff entirely without CPU involvement:
1. CPU starts the first DSB immediately
2. First DSB configures the second DSB, including its dewake_scanline
3. First DSB starts the second w/ DSB_WAIT_FOR_VBLANK
4. First DSB asserts DSB_FORCE_DEWAKE
5. First DSB waits until we're outside the dewake_scanline-vblank_start
window
6. First DSB deasserts DSB_FORCE_DEWAKE
That will guarantee that the we are fully awake when the second
DSB starts to actually execute.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-12-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
In order to handle the DEwake tricks without involving
the CPU we need a mechanism by which one DSB can start
another one. Add a basic function to do so. We'll extend
it later with additional code to actually deal with
DEwake.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-11-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Add functions to emit a DSB scanline window wait instructions.
We can either wait for the scanline to be IN the window
or OUT of the window.
The hardware doesn't handle wraparound so we must manually
deal with it by swapping the IN range to the inverse OUT
range, or vice versa.
Also add a bit of paranoia to catch the edge case of waiting
for the entire frame. That doesn't make sense since an IN
wait would be a nop, and an OUT wait would imply waiting
forever. Most of the time this also results in both scanline
ranges (original and inverted) to have lower=upper+1
which is nonsense from the hw POV.
For now we are only handling the case where the scanline wait
happens prior to latching the double buffered registers during
the commit (which might change the timings due to LRR/VRR/etc.)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-10-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Adjust the code that determines the correct DSB_CHICKEN value
to be usable for use within DSB commands themselves. Ie.
precompute it based on our knowledge of what the hardware state
(VRR vs. not mainly) will be at the time of the commit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-9-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
When determining various scanlines for DSB use we should take into
account whether VRR is active at the time when the DSB uses said
scanline information. For now all DSB scanline usage occurs prior
to the actual commit, so we only need to care about the state of
VRR at that time.
I've decided to move intel_crtc_scanline_to_hw() in its entirety
to the DSB code as it will also need to know the actual state
of VRR in order to do its job 100% correctly.
TODO: figure out how much of this could be moved to some
more generic place and perhaps be shared with the CPU
vblank evasion code/etc...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-8-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Currently we calculate the DEwake scanline based on
the delayed vblank start, while in reality it should be computed
based on the undelayed vblank start (as that is where the DSB
actually starts). Currently it doesn't really matter as we
don't have any vblank delay configured, but that may change
in the future so let's be accurate in what we do.
We can also remove the max() as intel_crtc_scanline_to_hw()
can deal with negative numbers, which there really shouldn't
be anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-7-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Relocate intel_dsb_dewake_scanline() and dsb_chicken() upwards
in the file. I need to reuse these while emitting DSB
commands, and I'd like to keep the DSB command emission
stuff more or less grouped together in the file.
Also drop the intel_ prefix from intel_dsb_dewake_scanline() since
it's all internal stuff and thus doesn't need so much namespacing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-6-ville.syrjala@linux.intel.com
Reviewed-by: Animesh manna <animesh.manna@intel.com>
|
|
Currently we switch from out software idea of a scanline
to the hw's idea of a scanline during the commit phase in
_intel_dsb_commit(). While that is slightly easier due to
fastsets fiddling with the timings, we'll also need to
generate proper hw scanline numbers already when emitting
DSB scanline wait instructions. So this approach won't
do in the future. Switch to hw scanline numbers earlier.
Also intel_dsb_dewake_scanline() itself already makes
some assumptions about VRR that don't take into account
VRR toggling during fastsets, so technically delaying
the sw->hw conversion doesn't even help us.
The other reason for delaying the conversion was that we
are using intel_get_crtc_scanline() during intel_dsb_commit()
which gives us the current sw scanline. But this is pretty
low level stuff anyway so just using raw PIPEDSL reads seems
fine here, and that of course gives us the hw scanline
directly, reducing the need to do so many conversions.
v2: Return the non-hw scanline from intel_dsb_dewake_scanline()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-5-ville.syrjala@linux.intel.com
|
|
Enable all DSB error/fault interrupts so that we can see if
anything goes terribly wrong.
v2: Pass intel_display to DISPLAY_VER() (Jani)
Drop extra '/' from drm_err() for consistency
v3: Reorder the irq handler a bit
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625135852.13431-1-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
|
|
Prefer the struct drm_edid based functions for allocating the EDID and
updating the connector.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c31c3afa883a3321345608c480c26161b638a83e.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer the struct drm_edid based functions for storing the EDID and
updating the connector.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/a1698044d556072e79041d69b8702099fd17bd90.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer the struct drm_edid based functions for reading the EDID and
updating the connector.
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/e764b50f4ad2de95e449ccb37f49c3f37b3333fc.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer the struct drm_edid based functions for reading the EDID and
updating the connector.
The functional change is that the CEC physical address gets invalidated
when the EDID could not be read.
v2: Use drm_edid_read() instead of drm_edid_read_ddc() (Sima)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/25879a0183e30792bf0d63bdf56a03f11018e4a3.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
On ilk/snb the pipe may be configured to place the LUT before or
after the CSC depending on various factors, but as there is only
one LUT (no split mode like on IVB+) we only advertise a gamma_lut
and no degamma_lut in the uapi to avoid confusing userspace.
This can cause a problem during readout if the VBIOS/GOP enabled
the LUT in the pre CSC configuration. The current code blindly
assigns the results of the readout to the degamma_lut, which will
cause a failure during the next atomic_check() as we aren't expecting
anything to be in degamma_lut since it's not visible to userspace.
Fix the problem by assigning whatever LUT we read out from the
hardware into gamma_lut.
Cc: stable@vger.kernel.org
Fixes: d2559299d339 ("drm/i915: Make ilk_read_luts() capable of degamma readout")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Replace deprecated 'mipi_dsi_dcs_write_seq()' macro
to 'mipi_dsi_dcs_write_seq_multi' macro in
panel_nv3051d_init_sequence function.
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240827152504.30586-1-abhishektamboli9@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827152504.30586-1-abhishektamboli9@gmail.com
|
|
Changes the novatek-nt35950 panel to use multi style functions for
improved error handling.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240828182210.565861-1-tejasvipin76@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828182210.565861-1-tejasvipin76@gmail.com
|
|
Switch to devm_regulator_bulk_get_const() to stop setting the supplies
list in probe(), and move the regulator_bulk_data struct in static const.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-2-0cae20d4c55d@linaro.org
|
|
Make usage of the new _multi() mipi_dsi functions instead of the
deprecated macros, improving error handling and printing.
bloat-o-meter gives a 12% gain on arm64:
Function old new delta
visionox_vtdr6130_unprepare 208 204 -4
visionox_vtdr6130_prepare 1192 896 -296
Total: Before=2348, After=2048, chg -12.78%
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sm8x50-upstream-vtdr6130-multi-v1-1-0cae20d4c55d@linaro.org
|
|
In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.
Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
nfc_start_poll()
->start_poll()
pn533_start_poll()
Add poll mod list filling check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Current design and handling of passthrough is without fuse
caching and with that FUSE_WRITEBACK_CACHE is conflicting.
Fixes: 7dc4e97a4f9a ("fuse: introduce FUSE_PASSTHROUGH capability")
Cc: stable@kernel.org # v6.9
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes
payload from netdev/egress by subtracting skb_network_offset() when
validating IPv4 packet length, otherwise 'meta l4proto udp' never
matches.
Patch #2 subtracts skb_network_offset() when validating IPv6 packet
length for netdev/egress.
netfilter pull request 24-08-28
* tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation
netfilter: nf_tables: restore IP sanity checks for netdev/egress
====================
Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Link my old est.tech address to my active mail address
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/20240828072417.4111996-1-sriram.yagnaraman@ericsson.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Matthieu Baerts says:
====================
mptcp: more fixes for the in-kernel PM
Here is a new batch of fixes for the MPTCP in-kernel path-manager:
Patch 1 ensures the address ID is set to 0 when the path-manager sends
an ADD_ADDR for the address of the initial subflow. The same fix is
applied when a new subflow is created re-using this special address. A
fix for v6.0.
Patch 2 is similar, but for the case where an endpoint is removed: if
this endpoint was used for the initial address, it is important to send
a RM_ADDR with this ID set to 0, and look for existing subflows with the
ID set to 0. A fix for v6.0 as well.
Patch 3 validates the two previous patches.
Patch 4 makes the PM selecting an "active" path to send an address
notification in an ACK, instead of taking the first path in the list. A
fix for v5.11.
Patch 5 fixes skipping the establishment of a new subflow if a previous
subflow using the same pair of addresses is being closed. A fix for
v5.13.
Patch 6 resets the ID linked to the initial subflow when the linked
endpoint is re-added, possibly with a different ID. A fix for v6.0.
Patch 7 validates the three previous patches.
Patch 8 is a small fix for the MPTCP Join selftest, when being used with
older subflows not supporting all MIB counters. A fix for a commit
introduced in v6.4, but backported up to v5.10.
Patch 9 avoids the PM to try to close the initial subflow multiple
times, and increment counters while nothing happened. A fix for v5.10.
Patch 10 stops incrementing local_addr_used and add_addr_accepted
counters when dealing with the address ID 0, because these counters are
not taking into account the initial subflow, and are then not
decremented when the linked addresses are removed. A fix for v6.0.
Patch 11 validates the previous patch.
Patch 12 avoids the PM to send multiple SUB_CLOSED events for the
initial subflow. A fix for v5.12.
Patch 13 validates the previous patch.
Patch 14 stops treating the ADD_ADDR 0 as a new address, and accepts it
in order to re-create the initial subflow if it has been closed, even if
the limit for *new* addresses -- not taking into account the address of
the initial subflow -- has been reached. A fix for v5.10.
Patch 15 validates the previous patch.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
---
Matthieu Baerts (NGI0) (15):
mptcp: pm: reuse ID 0 after delete and re-add
mptcp: pm: fix RM_ADDR ID for the initial subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: send ACK on an active subflow
mptcp: pm: skip connecting to already established sf
mptcp: pm: reset MPC endp ID when re-added
selftests: mptcp: join: check re-adding init endp with != id
selftests: mptcp: join: no extra msg if no counter
mptcp: pm: do not remove already closed subflows
mptcp: pm: fix ID 0 endp usage after multiple re-creations
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: validate event numbers
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: check re-re-adding ID 0 signal
net/mptcp/pm.c | 4 +-
net/mptcp/pm_netlink.c | 87 ++++++++++----
net/mptcp/protocol.c | 6 +
net/mptcp/protocol.h | 5 +-
tools/testing/selftests/net/mptcp/mptcp_join.sh | 153 ++++++++++++++++++++----
tools/testing/selftests/net/mptcp/mptcp_lib.sh | 4 +
6 files changed, 209 insertions(+), 50 deletions(-)
---
base-commit: 3a0504d54b3b57f0d7bf3d9184a00c9f8887f6d7
change-id: 20240826-net-mptcp-more-pm-fix-ffa61a36f817
Best regards,
====================
Link: https://patch.msgid.link/20240828-net-mptcp-more-pm-fix-v2-0-7f11b283fff7@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test extends "delete re-add signal" to validate the previous
commit: when the 'signal' endpoint linked to the initial subflow (ID 0)
is re-added multiple times, it will re-send the ADD_ADDR with id 0. The
client should still be able to re-create this subflow, even if the
add_addr_accepted limit has been reached as this special address is not
considered as a new address.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ADD_ADDR 0 with the address from the initial subflow should not be
considered as a new address: this is not something new. If the host
receives it, it simply means that the address is available again.
When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider
it as new by not incrementing the 'add_addr_accepted' counter. But the
'accept_addr' might not be set if the limit has already been reached:
this can be bypassed in this case. But before, it is important to check
that this ADD_ADDR for the ID 0 is for the same address as the initial
subflow. If not, it is not something that should happen, and the
ADD_ADDR can be ignored.
Note that if an ADD_ADDR is received while there is already a subflow
opened using the same address, this ADD_ADDR is ignored as well. It
means that if multiple ADD_ADDR for ID 0 are received, there will not be
any duplicated subflows created by the client.
Fixes: d0876b2284cf ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test extends "delete and re-add" and "delete re-add signal" to
validate the previous commit: the number of MPTCP events are checked to
make sure there are no duplicated or unexpected ones.
A new helper has been introduced to easily check these events. The
missing events have been added to the lib.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b911c97c7dc7 ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The initial subflow might have already been closed, but still in the
connection list. When the worker is instructed to close the subflows
that have been marked as closed, it might then try to close the initial
subflow again.
A consequence of that is that the SUB_CLOSED event can be seen twice:
# ip mptcp endpoint
1.1.1.1 id 1 subflow dev eth0
2.2.2.2 id 2 subflow dev eth1
# ip mptcp monitor &
[ CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9
# ip mptcp endpoint delete id 1
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the
second one from __mptcp_close_subflow().
To avoid doing the post-closed processing twice, the subflow is now
marked as closed the first time.
Note that it is not enough to check if we are dealing with the first
subflow and check its sk_state: the subflow might have been reset or
closed before calling mptcp_close_ssk().
Fixes: b911c97c7dc7 ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test extends "delete and re-add" to validate the previous commit:
when the endpoint linked to the initial subflow (ID 0) is re-added
multiple times, it was no longer being used, because the internal linked
counters are not decremented for this special endpoint: it is not an
additional endpoint.
Here, the "del/add id 0" steps are done 3 times to unsure this case is
validated.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
'local_addr_used' and 'add_addr_accepted' are decremented for addresses
not related to the initial subflow (ID0), because the source and
destination addresses of the initial subflows are known from the
beginning: they don't count as "additional local address being used" or
"ADD_ADDR being accepted".
It is then required not to increment them when the entrypoint used by
the initial subflow is removed and re-added during a connection. Without
this modification, this entrypoint cannot be removed and re-added more
than once.
Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/512
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Reported-by: syzbot+455d38ecd5f655fc45cf@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/00000000000049861306209237f4@google.com
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It is possible to have in the list already closed subflows, e.g. the
initial subflow has been already closed, but still in the list. No need
to try to close it again, and increments the related counters again.
Fixes: 0ee4261a3681 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The checksum and fail counters might not be available. Then no need to
display an extra message with missing info.
While at it, fix the indentation around, which is wrong since the same
commit.
Fixes: 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID, but the kernel should still use the ID 0 if it corresponds
to the initial address.
This test validates this behaviour: the endpoint linked to the initial
subflow is removed, and re-added with a different ID.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID -- most services managing the endpoints automatically don't
force the ID to be the same as before. It is then important to track
these modifications to be consistent with the ID being used for the
address used by the initial subflow, not to confuse the other peer or to
send the ID 0 for the wrong address.
Now when removing an endpoint, msk->mpc_endpoint_id is reset if it
corresponds to this endpoint. When adding a new endpoint, the same
variable is updated if the address match the one of the initial subflow.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The lookup_subflow_by_daddr() helper checks if there is already a
subflow connected to this address. But there could be a subflow that is
closing, but taking time due to some reasons: latency, losses, data to
process, etc.
If an ADD_ADDR is received while the endpoint is being closed, it is
better to try connecting to it, instead of rejecting it: the peer which
has sent the ADD_ADDR will not be notified that the ADD_ADDR has been
rejected for this reason, and the expected subflow will not be created
at the end.
This helper should then only look for subflows that are established, or
going to be, but not the ones being closed.
Fixes: d84ad04941c3 ("mptcp: skip connecting the connected address")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Taking the first one on the list doesn't work in some cases, e.g. if the
initial subflow is being removed. Pick another one instead of not
sending anything.
Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Removing the endpoint linked to the initial subflow should trigger a
RM_ADDR for the right ID, and the removal of the subflow. That's what is
now being verified in the "delete and re-add" test.
Note that removing the initial subflow will not decrement the 'subflows'
counters, which corresponds to the *additional* subflows. On the other
hand, when the same endpoint is re-added, it will increment this
counter, as it will be seen as an additional subflow this time.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The initial subflow has a special local ID: 0. When an endpoint is being
deleted, it is then important to check if its address is not linked to
the initial subflow to send the right ID.
If there was an endpoint linked to the initial subflow, msk's
mpc_endpoint_id field will be set. We can then use this info when an
endpoint is being removed to see if it is linked to the initial subflow.
So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(),
it is no longer needed to use mptcp_local_id_match().
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the endpoint used by the initial subflow is removed and re-added
later, the PM has to force the ID 0, it is a special case imposed by the
MPTCP specs.
Note that the endpoint should then need to be re-added reusing the same
ID.
Fixes: 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of just smashing jiffies into a GUID, use guid_gen() to generate
RFC 4122 compliant GUIDs.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Instead of just smashing jiffies into a GUID, use guid_gen() to generate
RFC 4122 compliant GUIDs.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The kernel has a guid_t type for GUIDs. Switch to using it, but avoid
any functional changes here.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.11-2024-08-28:
amdgpu:
- SWSMU gaming stability fix
- SMU 13.0.7 fix
- SWSMU documentation alignment fix
- SMU 14.0.x fixes
- GC 12.x fix
- Display fix
- IP discovery fix
- SMU 13.0.6 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828184908.125387-1-alexander.deucher@amd.com
|
|
If an interrupt occurs in queued_spin_lock_slowpath() after we increment
qnodesp->count and before node->lock is initialized, another CPU might
see stale lock values in get_tail_qnode(). If the stale lock value happens
to match the lock on that CPU, then we write to the "next" pointer of
the wrong qnode. This causes a deadlock as the former CPU, once it becomes
the head of the MCS queue, will spin indefinitely until it's "next" pointer
is set by its successor in the queue.
Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in
occasional lockups similar to the following:
$ stress-ng --all 128 --vm-bytes 80% --aggressive \
--maximize --oomable --verify --syslog \
--metrics --times --timeout 5m
watchdog: CPU 15 Hard LOCKUP
......
NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
Call Trace:
0xc000002cfffa3bf0 (unreliable)
_raw_spin_lock+0x6c/0x90
raw_spin_rq_lock_nested.part.135+0x4c/0xd0
sched_ttwu_pending+0x60/0x1f0
__flush_smp_call_function_queue+0x1dc/0x670
smp_ipi_demux_relaxed+0xa4/0x100
xive_muxed_ipi_action+0x20/0x40
__handle_irq_event_percpu+0x80/0x240
handle_irq_event_percpu+0x2c/0x80
handle_percpu_irq+0x84/0xd0
generic_handle_irq+0x54/0x80
__do_irq+0xac/0x210
__do_IRQ+0x74/0xd0
0x0
do_IRQ+0x8c/0x170
hardware_interrupt_common_virt+0x29c/0x2a0
--- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490
......
NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
--- interrupt: 500
0xc0000029c1a41d00 (unreliable)
_raw_spin_lock+0x6c/0x90
futex_wake+0x100/0x260
do_futex+0x21c/0x2a0
sys_futex+0x98/0x270
system_call_exception+0x14c/0x2f0
system_call_vectored_common+0x15c/0x2ec
The following code flow illustrates how the deadlock occurs.
For the sake of brevity, assume that both locks (A and B) are
contended and we call the queued_spin_lock_slowpath() function.
CPU0 CPU1
---- ----
spin_lock_irqsave(A) |
spin_unlock_irqrestore(A) |
spin_lock(B) |
| |
▼ |
id = qnodesp->count++; |
(Note that nodes[0].lock == A) |
| |
▼ |
Interrupt |
(happens before "nodes[0].lock = B") |
| |
▼ |
spin_lock_irqsave(A) |
| |
▼ |
id = qnodesp->count++ |
nodes[1].lock = A |
| |
▼ |
Tail of MCS queue |
| spin_lock_irqsave(A)
▼ |
Head of MCS queue ▼
| CPU0 is previous tail
▼ |
Spin indefinitely ▼
(until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0)
|
▼
prev == &qnodes[CPU0].nodes[0]
(as qnodes[CPU0].nodes[0].lock == A)
|
▼
WRITE_ONCE(prev->next, node)
|
▼
Spin indefinitely
(until nodes[0].locked == 1)
Thanks to Saket Kumar Bhaskar for help with recreating the issue
Fixes: 84990b169557 ("powerpc/qspinlock: add mcs queueing for contended waiters")
Cc: stable@vger.kernel.org # v6.2+
Reported-by: Geetika Moolchandani <geetika@linux.ibm.com>
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Reported-by: Jijo Varghese <vargjijo@in.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240829022830.1164355-1-nysal@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fix from Jason Donenfeld:
"Reject invalid flags passed to vgetrandom() in the same way that
getrandom() does, so that the behavior is the same, from Yann.
The flags argument to getrandom() only has a behavioral effect on the
function if the RNG isn't initialized yet, so vgetrandom() falls back
to the syscall in that case. But if the RNG is initialized, all of the
flags behave the same way, so vgetrandom() didn't bother checking
them, and just ignored them entirely.
But that doesn't account for invalid flags passed in, which need to be
rejected so we can use them later"
* tag 'random-6.11-rc6-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: vDSO: reject unknown getrandom() flags
|
|
MT8183 implements the UFSHCI 2.1 spec but reports a bogus value of 1 in
the reserved part for the Legacy Single Doorbell Support (LSDBS)
capability.
Set UFSHCD_QUIRK_BROKEN_LSDBS_CAP when MCQ support is explicitly
disabled, allowing the device to be properly registered.
Signed-off-by: Mary Guillemard <mary@mary.zone>
Link: https://lore.kernel.org/r/20240818222442.44990-3-mary@mary.zone
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
