summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-08gpio: loongson: Fix Loongson-2K2000 ACPI GPIO register offsetBinbin Zhou
Since commit 3feb70a61740 ("gpio: loongson: add more gpio chip support"), the Loongson-2K2000 GPIO is supported. However, according to the firmware development specification, the Loongson-2K2000 ACPI GPIO register offsets in the driver do not match the register base addresses in the firmware, resulting in the registers not being accessed properly. Now, we fix it to ensure the GPIO function works properly. Cc: stable@vger.kernel.org Cc: Yinbo Zhu <zhuyinbo@loongson.cn> Fixes: 3feb70a61740 ("gpio: loongson: add more gpio chip support") Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Link: https://lore.kernel.org/r/20250107103856.1037222-1-zhoubinbin@loongson.cn Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-01-08Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"Suraj Kandpal
This reverts commit 483f7d94a0453564ad9295288c0242136c5f36a0. This needs to be reverted since HDCP even after updating the connector state HDCP property we don't reenable HDCP until the next commit in which the CP Property is set causing compliance to fail. --v2 -Fix build issue [Dnyaneshwar] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103084517.239998-1-suraj.kandpal@intel.com (cherry picked from commit fcf73e20cd1fe60c3ba5f9626f1e8f9cd4511edf) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2025-01-07eth: gve: use appropriate helper to set xdp_featuresJakub Kicinski
Commit f85949f98206 ("xdp: add xdp_set_features_flag utility routine") added routines to inform the core about XDP flag changes. GVE support was added around the same time and missed using them. GVE only changes the flags on error recover or resume. Presumably the flags may change during resume if VM migrated. User would not get the notification and upper devices would not get a chance to recalculate their flags. Fixes: 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format") Reviewed-By: Jeroen de Borst <jeroendb@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250106180210.1861784-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07ipvlan: Fix use-after-free in ipvlan_get_iflink().Kuniyuki Iwashima
syzbot presented an use-after-free report [0] regarding ipvlan and linkwatch. ipvlan does not hold a refcnt of the lower device unlike vlan and macvlan. If the linkwatch work is triggered for the ipvlan dev, the lower dev might have already been freed, resulting in UAF of ipvlan->phy_dev in ipvlan_get_iflink(). We can delay the lower dev unregistration like vlan and macvlan by holding the lower dev's refcnt in dev->netdev_ops->ndo_init() and releasing it in dev->priv_destructor(). Jakub pointed out calling .ndo_XXX after unregister_netdevice() has returned is error prone and suggested [1] addressing this UAF in the core by taking commit 750e51603395 ("net: avoid potential UAF in default_operstate()") further. Let's assume unregistering devices DOWN and use RCU protection in default_operstate() not to race with the device unregistration. [0]: BUG: KASAN: slab-use-after-free in ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 Read of size 4 at addr ffff0000d768c0e0 by task kworker/u8:35/6944 CPU: 0 UID: 0 PID: 6944 Comm: kworker/u8:35 Not tainted 6.13.0-rc2-g9bc5c9515b48 #12 4c3cb9e8b4565456f6a355f312ff91f4f29b3c47 Hardware name: linux,dummy-virt (DT) Workqueue: events_unbound linkwatch_event Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:484 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load4_noabort+0x20/0x30 mm/kasan/report_generic.c:380 ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 dev_get_iflink+0x7c/0xd8 net/core/dev.c:674 default_operstate net/core/link_watch.c:45 [inline] rfc2863_policy+0x144/0x360 net/core/link_watch.c:72 linkwatch_do_dev+0x60/0x228 net/core/link_watch.c:175 __linkwatch_run_queue+0x2f4/0x5b8 net/core/link_watch.c:239 linkwatch_event+0x64/0xa8 net/core/link_watch.c:282 process_one_work+0x700/0x1398 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3391 kthread+0x2b0/0x360 kernel/kthread.c:389 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 Allocated by task 9303: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4283 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4289 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:650 alloc_netdev_mqs+0xb4/0x1118 net/core/dev.c:11209 rtnl_create_link+0x2b8/0xb60 net/core/rtnetlink.c:3595 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3771 __rtnl_newlink net/core/rtnetlink.c:3896 [inline] rtnl_newlink+0x122c/0x15c0 net/core/rtnetlink.c:4011 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6901 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6928 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] __sys_sendto+0x2ec/0x438 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __arm64_sys_sendto+0xe4/0x110 net/socket.c:2200 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 Freed by task 10200: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_free_info+0x58/0x70 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x48/0x68 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2338 [inline] slab_free mm/slub.c:4598 [inline] kfree+0x140/0x420 mm/slub.c:4746 kvfree+0x4c/0x68 mm/util.c:693 netdev_release+0x94/0xc8 net/core/net-sysfs.c:2034 device_release+0x98/0x1c0 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x2b0/0x438 lib/kobject.c:737 netdev_run_todo+0xdd8/0xf48 net/core/dev.c:10924 rtnl_unlock net/core/rtnetlink.c:152 [inline] rtnl_net_unlock net/core/rtnetlink.c:209 [inline] rtnl_dellink+0x484/0x680 net/core/rtnetlink.c:3526 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6901 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6928 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] ____sys_sendmsg+0x410/0x708 net/socket.c:2583 ___sys_sendmsg+0x178/0x1d8 net/socket.c:2637 __sys_sendmsg net/socket.c:2669 [inline] __do_sys_sendmsg net/socket.c:2674 [inline] __se_sys_sendmsg net/socket.c:2672 [inline] __arm64_sys_sendmsg+0x12c/0x1c8 net/socket.c:2672 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el0_svc+0x4c/0xa8 arch/arm64/kernel/entry-common.c:744 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:762 el0t_64_sync+0x198/0x1a0 arch/arm64/kernel/entry.S:600 The buggy address belongs to the object at ffff0000d768c000 which belongs to the cache kmalloc-cg-4k of size 4096 The buggy address is located 224 bytes inside of freed 4096-byte region [ffff0000d768c000, ffff0000d768d000) The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x117688 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:ffff0000c77ef981 flags: 0xbfffe0000000040(head|node=0|zone=2|lastcpupid=0x1ffff) page_type: f5(slab) raw: 0bfffe0000000040 ffff0000c000f500 dead000000000100 dead000000000122 raw: 0000000000000000 0000000000040004 00000001f5000000 ffff0000c77ef981 head: 0bfffe0000000040 ffff0000c000f500 dead000000000100 dead000000000122 head: 0000000000000000 0000000000040004 00000001f5000000 ffff0000c77ef981 head: 0bfffe0000000003 fffffdffc35da201 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff0000d768bf80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff0000d768c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff0000d768c080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff0000d768c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff0000d768c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 8c55facecd7a ("net: linkwatch: only report IF_OPER_LOWERLAYERDOWN if iflink is actually down") Reported-by: syzkaller <syzkaller@googlegroups.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/netdev/20250102174400.085fd8ac@kernel.org/ [1] Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250106071911.64355-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07tls: Fix tls_sw_sendmsg error handlingBenjamin Coddington
We've noticed that NFS can hang when using RPC over TLS on an unstable connection, and investigation shows that the RPC layer is stuck in a tight loop attempting to transmit, but forever getting -EBADMSG back from the underlying network. The loop begins when tcp_sendmsg_locked() returns -EPIPE to tls_tx_records(), but that error is converted to -EBADMSG when calling the socket's error reporting handler. Instead of converting errors from tcp_sendmsg_locked(), let's pass them along in this path. The RPC layer handles -EPIPE by reconnecting the transport, which prevents the endless attempts to transmit on a broken connection. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Link: https://patch.msgid.link/9594185559881679d81f071b181a10eb07cd079f.1736004079.git.bcodding@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07ksmbd: Implement new SMB3 POSIX typeNamjae Jeon
As SMB3 posix extension specification, Give posix file type to posix mode. https://www.samba.org/~slow/SMB3_POSIX/fscc_posix_extensions.html#posix-file-type-definition Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-01-07ksmbd: fix unexpectedly changed path in ksmbd_vfs_kern_path_lockedHe Wang
When `ksmbd_vfs_kern_path_locked` met an error and it is not the last entry, it will exit without restoring changed path buffer. But later this buffer may be used as the filename for creation. Fixes: c5a709f08d40 ("ksmbd: handle caseless file creation") Signed-off-by: He Wang <xw897002528@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-01-07Merge tag 'selinux-pr-20250107' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "A single SELinux patch to address a problem with a single domain using multiple xperm classes" * tag 'selinux-pr-20250107' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: match extended permissions to their base permissions
2025-01-07eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON ↵Su Hui
interface" There is a garbage value problem in fbnic_mac_get_sensor_asic(). 'fw_cmpl' is uninitialized which makes 'sensor' and '*val' to be stored garbage value. Revert commit d85ebade02e8 ("eth: fbnic: Add hardware monitoring support via HWMON interface") to avoid this problem. Fixes: d85ebade02e8 ("eth: fbnic: Add hardware monitoring support via HWMON interface") Signed-off-by: Su Hui <suhui@nfschina.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106023647.47756-1-suhui@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07thermal: of: fix OF node leak in of_thermal_zone_find()Joe Hattori
of_thermal_zone_find() calls of_parse_phandle_with_args(), but does not release the OF node reference obtained by it. Add a of_node_put() call when the call is successful. Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Link: https://patch.msgid.link/20241224031809.950461-1-joe@pf.is.s.u-tokyo.ac.jp [ rjw: Changelog edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07ACPI: resource: acpi_dev_irq_override(): Check DMI match lastHans de Goede
acpi_dev_irq_override() gets called approx. 30 times during boot (15 legacy IRQs * 2 override_table entries). Of these 30 calls at max 1 will match the non DMI checks done by acpi_dev_irq_override(). The dmi_check_system() check is by far the most expensive check done by acpi_dev_irq_override(), make this call the last check done by acpi_dev_irq_override() so that it will be called at max 1 time instead of 30 times. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20241228165253.42584-1-hdegoede@redhat.com [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[]Hans de Goede
The TongFang GM5HG0A is a TongFang barebone design which is sold under various brand names. The ACPI IRQ override for the keyboard IRQ must be used on these AMD Zen laptops in order for the IRQ to work. At least on the SKIKK Vanaheim variant the DMI product- and board-name strings have been replaced by the OEM with "Vanaheim" so checking that board-name contains "GM5HG0A" as is usually done for TongFang barebones quirks does not work. The DMI OEM strings do contain "GM5HG0A". I have looked at the dmidecode for a few other TongFang devices and the TongFang code-name string being in the OEM strings seems to be something which is consistently true. Add a quirk checking one of the DMI_OEM_STRING(s) is "GM5HG0A" in the hope that this will work for other OEM versions of the "GM5HG0A" too. Link: https://www.skikk.eu/en/laptops/vanaheim-15-rtx-4060 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219614 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20241228164845.42381-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[]Hans de Goede
Like the Vivobook X1704VAP the X1504VAP has its keyboard IRQ (1) described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which breaks the keyboard. Add the X1504VAP to the irq1_level_low_skip_override[] quirk table to fix this. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20241220181352.25974-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07igc: return early when failing to read EECD registerEn-Wei Wu
When booting with a dock connected, the igc driver may get stuck for ~40 seconds if PCIe link is lost during initialization. This happens because the driver access device after EECD register reads return all F's, indicating failed reads. Consequently, hw->hw_addr is set to NULL, which impacts subsequent rd32() reads. This leads to the driver hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr prevents retrieving the expected value. To address this, a validation check and a corresponding return value catch is added for the EECD register read result. If all F's are returned, indicating PCIe link loss, the driver will return -ENXIO immediately. This avoids the 40-second hang and significantly improves boot time when using a dock with an igc NIC. Log before the patch: [ 0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity [ 1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached [ 43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set. [ 43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13 [ 46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity Log after the patch: [ 1.031000] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 1.032097] igc 0000:70:00.0: PTM enabled, 4ns granularity [ 1.642291] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached [ 5.480490] igc 0000:70:00.0: enabling device (0000 -> 0002) [ 5.480516] igc 0000:70:00.0: PTM enabled, 4ns granularity Fixes: ab4056126813 ("igc: Add NVM support") Cc: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com> Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07ice: fix incorrect PHY settings for 100 GB/sPrzemyslaw Korba
ptp4l application reports too high offset when ran on E823 device with a 100GB/s link. Those values cannot go under 100ns, like in a working case when using 100 GB/s cable. This is due to incorrect frequency settings on the PHY clocks for 100 GB/s speed. Changes are introduced to align with the internal hardware documentation, and correctly initialize frequency in PHY clocks with the frequency values that are in our HW spec. To reproduce the issue run ptp4l as a Time Receiver on E823 device, and observe the offset, which will never approach values seen in the PTP working case. Reproduction output: ptp4l -i enp137s0f3 -m -2 -s -f /etc/ptp4l_8275.conf ptp4l[5278.775]: master offset 12470 s2 freq +41288 path delay -3002 ptp4l[5278.837]: master offset 10525 s2 freq +39202 path delay -3002 ptp4l[5278.900]: master offset -24840 s2 freq -20130 path delay -3002 ptp4l[5278.963]: master offset 10597 s2 freq +37908 path delay -3002 ptp4l[5279.025]: master offset 8883 s2 freq +36031 path delay -3002 ptp4l[5279.088]: master offset 7267 s2 freq +34151 path delay -3002 ptp4l[5279.150]: master offset 5771 s2 freq +32316 path delay -3002 ptp4l[5279.213]: master offset 4388 s2 freq +30526 path delay -3002 ptp4l[5279.275]: master offset -30434 s2 freq -28485 path delay -3002 ptp4l[5279.338]: master offset -28041 s2 freq -27412 path delay -3002 ptp4l[5279.400]: master offset 7870 s2 freq +31118 path delay -3002 Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support") Reviewed-by: Milena Olech <milena.olech@intel.com> Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07ice: fix max values for dpll pin phase adjustArkadiusz Kubalewski
Mask admin command returned max phase adjust value for both input and output pins. Only 31 bits are relevant, last released data sheet wrongly points that 32 bits are valid - see [1] 3.2.6.4.1 Get CCU Capabilities Command for reference. Fix of the datasheet itself is in progress. Fix the min/max assignment logic, previously the value was wrongly considered as negative value due to most significant bit being set. Example of previous broken behavior: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --do pin-get --json '{"id":1}'| grep phase-adjust 'phase-adjust': 0, 'phase-adjust-max': 16723, 'phase-adjust-min': -16723, Correct behavior with the fix: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --do pin-get --json '{"id":1}'| grep phase-adjust 'phase-adjust': 0, 'phase-adjust-max': 2147466925, 'phase-adjust-min': -2147466925, [1] https://cdrdv2.intel.com/v1/dl/getContent/613875?explicitVersion=true Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07platform/x86: intel/pmc: Fix ioremap() of bad addressDavid E. Box
In pmc_core_ssram_get_pmc(), the physical addresses for hidden SSRAM devices are retrieved from the MMIO region of the primary SSRAM device. If additional devices are not present, the address returned is zero. Currently, the code does not check for this condition, resulting in ioremap() incorrectly attempting to map address 0. Add a check for a zero address and return 0 if no additional devices are found, as it is not an error for the device to be absent. Fixes: a01486dc4bb1 ("platform/x86/intel/pmc: Cleanup SSRAM discovery") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20250106174653.1497128-1-david.e.box@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-07platform/x86: ISST: Add Clearwater Forest to support listSrinivas Pandruvada
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to SST support list by adding to isst_cpu_ids. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20250103155255.1488139-2-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-07platform/x86/intel: power-domains: Add Clearwater Forest supportSrinivas Pandruvada
Add Clearwater Forest support (INTEL_ATOM_DARKMONT_X) to tpmi_cpu_ids to support domaid id mappings. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20250103155255.1488139-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-07platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled itMaciej S. Szmigiero
Wakeup for IRQ1 should be disabled only in cases where i8042 had actually enabled it, otherwise "wake_depth" for this IRQ will try to drop below zero and there will be an unpleasant WARN() logged: kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug kernel: ------------[ cut here ]------------ kernel: Unbalanced IRQ 1 wake disable kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0 The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and .poweroff handlers. i8042_pm_suspend(), however, is only set as the .suspend handler. Fix the issue by call PMC suspend handler only from the same set of dev_pm_ops handlers as i8042_pm_suspend(), which currently means just the .suspend handler. To reproduce this issue try hibernating (S4) the machine after a fresh boot without putting it into s2idle first. Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Link: https://lore.kernel.org/r/c8f28c002ca3c66fbeeb850904a1f43118e17200.1736184606.git.mail@maciej.szmigiero.name [ij: edited the commit message.] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-07afs: Fix the maximum cell name lengthDavid Howells
The kafs filesystem limits the maximum length of a cell to 256 bytes, but a problem occurs if someone actually does that: kafs tries to create a directory under /proc/net/afs/ with the name of the cell, but that fails with a warning: WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:405 because procfs limits the maximum filename length to 255. However, the DNS limits the maximum lookup length and, by extension, the maximum cell name, to 255 less two (length count and trailing NUL). Fix this by limiting the maximum acceptable cellname length to 253. This also allows us to be sure we can create the "/afs/.<cell>/" mountpoint too. Further, split the YFS VL record cell name maximum to be the 256 allowed by the protocol and ignore the record retrieved by YFSVL.GetCellName if it exceeds 253. Fixes: c3e9f888263b ("afs: Implement client support for the YFSVL.GetCellName RPC op") Reported-by: syzbot+7848fee1f1e5c53f912b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/6776d25d.050a0220.3a8527.0048.GAE@google.com/ Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/376236.1736180460@warthog.procyon.org.uk Tested-by: syzbot+7848fee1f1e5c53f912b@syzkaller.appspotmail.com cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-07Merge tag 'fuse-fixes-6.13-rc7' of ↵Christian Brauner
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi <mszeredi@redhat.com>: - Fix fuse_get_user_pages() allocation failure handling. - Fix direct-io folio offset and length calculation. * tag 'fuse-fixes-6.13-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure fuse: fix direct io folio offset and length calculation Link: https://lore.kernel.org/r/CAJfpegu7o_X%3DSBWk_C47dUVUQ1mJZDEGe1MfD0N3wVJoUBWdmg@mail.gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-07net: don't dump Tx and uninitialized NAPIsJakub Kicinski
We use NAPI ID as the key for continuing dumps. We also depend on the NAPIs being sorted by ID within the driver list. Tx NAPIs (which don't have an ID assigned) break this expectation, it's not currently possible to dump them reliably. Since Tx NAPIs are relatively rare, and can't be used in doit (GET or SET) hide them from the dump API as well. Fixes: 27f91aaf49b3 ("netdev-genl: Add netlink framework functions for napi") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250103183207.1216004-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-06cxgb4: Avoid removal of uninserted tidAnumula Murali Mohan Reddy
During ARP failure, tid is not inserted but _c4iw_free_ep() attempts to remove tid which results in error. This patch fixes the issue by avoiding removal of uninserted tid. Fixes: 59437d78f088 ("cxgb4/chtls: fix ULD connection failures due to wrong TID base") Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com> Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Link: https://patch.msgid.link/20250103092327.1011925-1-anumula@chelsio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06Merge branch 'bnxt_en-2-bug-fixes'Jakub Kicinski
Michael Chan says: ==================== bnxt_en: 2 Bug fixes The first patch fixes a potential memory leak when sending a FW message for the RoCE driver. The second patch fixes the potential issue of DIM modifying the coalescing parameters of a ring that has been freed. ==================== Link: https://patch.msgid.link/20250104043849.3482067-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06bnxt_en: Fix DIM shutdownMichael Chan
DIM work will call the firmware to adjust the coalescing parameters on the RX rings. We should cancel DIM work before we call the firmware to free the RX rings. Otherwise, FW will reject the call from DIM work if the RX ring has been freed. This will generate an error message like this: bnxt_en 0000:21:00.1 ens2f1np1: hwrm req_type 0x53 seq id 0x6fca error 0x2 and cause unnecessary concern for the user. It is also possible to modify the coalescing parameters of the wrong ring if the ring has been re-allocated. To prevent this, cancel DIM work right before freeing the RX rings. We also have to add a check in NAPI poll to not schedule DIM if the RX rings are shutting down. Check that the VNIC is active before we schedule DIM. The VNIC is always disabled before we free the RX rings. Fixes: 0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown") Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250104043849.3482067-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06bnxt_en: Fix possible memory leak when hwrm_req_replace failsKalesh AP
When hwrm_req_replace() fails, the driver is not invoking bnxt_req_drop() which could cause a memory leak. Fixes: bbf33d1d9805 ("bnxt_en: update all firmware calls to use the new APIs") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250104043849.3482067-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06pds_core: limit loop over fw name listShannon Nelson
Add an array size limit to the for-loop to be sure we don't try to reference a fw_version string off the end of the fw info names array. We know that our firmware only has a limited number of firmware slot names, but we shouldn't leave this unchecked. Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250103195147.7408-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-06drm/amdgpu: Add a lock when accessing the buddy trim functionArunpravin Paneer Selvam
When running YouTube videos and Steam games simultaneously, the tester found a system hang / race condition issue with the multi-display configuration setting. Adding a lock to the buddy allocator's trim function would be the solution. <log snip> [ 7197.250436] general protection fault, probably for non-canonical address 0xdead000000000108 [ 7197.250447] RIP: 0010:__alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250470] Call Trace: [ 7197.250472] <TASK> [ 7197.250475] ? show_regs+0x6d/0x80 [ 7197.250481] ? die_addr+0x37/0xa0 [ 7197.250483] ? exc_general_protection+0x1db/0x480 [ 7197.250488] ? drm_suballoc_new+0x13c/0x93d [drm_suballoc_helper] [ 7197.250493] ? asm_exc_general_protection+0x27/0x30 [ 7197.250498] ? __alloc_range+0x8b/0x340 [amddrm_buddy] [ 7197.250501] ? __alloc_range+0x109/0x340 [amddrm_buddy] [ 7197.250506] amddrm_buddy_block_trim+0x1b5/0x260 [amddrm_buddy] [ 7197.250511] amdgpu_vram_mgr_new+0x4f5/0x590 [amdgpu] [ 7197.250682] amdttm_resource_alloc+0x46/0xb0 [amdttm] [ 7197.250689] ttm_bo_alloc_resource+0xe4/0x370 [amdttm] [ 7197.250696] amdttm_bo_validate+0x9d/0x180 [amdttm] [ 7197.250701] amdgpu_bo_pin+0x15a/0x2f0 [amdgpu] [ 7197.250831] amdgpu_dm_plane_helper_prepare_fb+0xb2/0x360 [amdgpu] [ 7197.251025] ? try_wait_for_completion+0x59/0x70 [ 7197.251030] drm_atomic_helper_prepare_planes.part.0+0x2f/0x1e0 [ 7197.251035] drm_atomic_helper_prepare_planes+0x5d/0x70 [ 7197.251037] drm_atomic_helper_commit+0x84/0x160 [ 7197.251040] drm_atomic_nonblocking_commit+0x59/0x70 [ 7197.251043] drm_mode_atomic_ioctl+0x720/0x850 [ 7197.251047] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251049] drm_ioctl_kernel+0xb9/0x120 [ 7197.251053] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251056] drm_ioctl+0x2d4/0x550 [ 7197.251058] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [ 7197.251063] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ 7197.251186] __x64_sys_ioctl+0xa0/0xf0 [ 7197.251190] x64_sys_call+0x143b/0x25c0 [ 7197.251193] do_syscall_64+0x7f/0x180 [ 7197.251197] ? srso_alias_return_thunk+0x5/0xfbef5 [ 7197.251199] ? amdgpu_display_user_framebuffer_create+0x215/0x320 [amdgpu] [ 7197.251329] ? drm_internal_framebuffer_create+0xb7/0x1a0 [ 7197.251332] ? srso_alias_return_thunk+0x5/0xfbef5 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Fixes: 4a5ad08f5377 ("drm/amdgpu: Add address alignment support to DCC buffers") Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3318ba94e56b9183d0304577c74b33b6b01ce516) Cc: stable@vger.kernel.org
2025-01-06drm/amd/pm: fix BUG: scheduling while atomicKun Liu
atomic scheduling will be triggered in interrupt handler for AC/DC mode switch as following backtrace. Call Trace: <IRQ> dump_stack_lvl __schedule_bug __schedule schedule schedule_preempt_disabled __mutex_lock smu_cmn_send_smc_msg_with_param smu_v13_0_irq_process amdgpu_irq_dispatch amdgpu_ih_process amdgpu_irq_handler __handle_irq_event_percpu handle_irq_event handle_edge_irq __common_interrupt common_interrupt </IRQ> <TASK> asm_common_interrupt Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Kun Liu <Kun.Liu2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 03cc84b102d1a832e8dfc59344346dedcebcdf42) Cc: stable@vger.kernel.org
2025-01-06drm/amdkfd: wq_release signals dma_fence only when availableZhu Lingshan
kfd_process_wq_release() signals eviction fence by dma_fence_signal() which wanrs if dma_fence is NULL. kfd_process->ef is initialized by kfd_process_device_init_vm() through ioctl. That means the fence is NULL for a new created kfd_process, and close a kfd_process right after open it will trigger the warning. This commit conditionally signals the eviction fence in kfd_process_wq_release() only when it is available. [ 503.660882] WARNING: CPU: 0 PID: 9 at drivers/dma-buf/dma-fence.c:467 dma_fence_signal+0x74/0xa0 [ 503.782940] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu] [ 503.789640] RIP: 0010:dma_fence_signal+0x74/0xa0 [ 503.877620] Call Trace: [ 503.880066] <TASK> [ 503.882168] ? __warn+0xcd/0x260 [ 503.885407] ? dma_fence_signal+0x74/0xa0 [ 503.889416] ? report_bug+0x288/0x2d0 [ 503.893089] ? handle_bug+0x53/0xa0 [ 503.896587] ? exc_invalid_op+0x14/0x50 [ 503.900424] ? asm_exc_invalid_op+0x16/0x20 [ 503.904616] ? dma_fence_signal+0x74/0xa0 [ 503.908626] kfd_process_wq_release+0x6b/0x370 [amdgpu] [ 503.914081] process_one_work+0x654/0x10a0 [ 503.918186] worker_thread+0x6c3/0xe70 [ 503.921943] ? srso_alias_return_thunk+0x5/0xfbef5 [ 503.926735] ? srso_alias_return_thunk+0x5/0xfbef5 [ 503.931527] ? __kthread_parkme+0x82/0x140 [ 503.935631] ? __pfx_worker_thread+0x10/0x10 [ 503.939904] kthread+0x2a8/0x380 [ 503.943132] ? __pfx_kthread+0x10/0x10 [ 503.946882] ret_from_fork+0x2d/0x70 [ 503.950458] ? __pfx_kthread+0x10/0x10 [ 503.954210] ret_from_fork_asm+0x1a/0x30 [ 503.958142] </TASK> [ 503.960328] ---[ end trace 0000000000000000 ]--- Fixes: 967d226eaae8 ("dma-buf: add WARN_ON() illegal dma-fence signaling") Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 2774ef7625adb5fb9e9265c26a59dca7b8fd171e) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: Add check for granularity in dml ceil/floor helpersRoman Li
[Why] Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2() should check for granularity is non zero to avoid assert and divide-by-zero error in dcn_bw_ functions. [How] Add check for granularity 0. Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit f6e09701c3eb2ccb8cb0518e0b67f1c69742a4ec) Cc: stable@vger.kernel.org
2025-01-06drm/amdkfd: fixed page fault when enable MES shader debuggerJesse.zhang@amd.com
Initialize the process context address before setting the shader debugger. [ 260.781212] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.781236] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 [ 260.781255] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A40 [ 260.781270] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 260.781284] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x0 [ 260.781296] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0 [ 260.781308] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4 [ 260.781320] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0 [ 260.781332] amdgpu 0000:03:00.0: amdgpu: RW: 0x1 [ 260.782017] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.782039] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 [ 260.782058] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A41 [ 260.782073] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 260.782087] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x1 [ 260.782098] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0 [ 260.782110] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4 [ 260.782122] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0 [ 260.782137] amdgpu 0000:03:00.0: amdgpu: RW: 0x1 [ 260.782155] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.782166] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 Fixes: 438b39ac74e2 ("drm/amdkfd: pause autosuspend when creating pdd") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3849 Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 5b231f5bc9ff02ec5737f2ec95cdf15ac95088e9) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: fix divide error in DM plane scale calcsMelissa Wen
dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 38 c0 0f 05 <49> 89 c7 48 83 3b 00 74 09 4c 89 c7 ff 15 62 64 99 00 48 83 7b 18 [ +0.000005] RSP: 002b:00007f869e9f4da0 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 [ +0.000007] RAX: ffffffffffffffda RBX: 00007f869e9f4fb8 RCX: 000055bb7cd962bc [ +0.000004] RDX: 00007f869e9f4da8 RSI: 00000000c03864bc RDI: 000000000000003b [ +0.000003] RBP: 000055bb9ddcbcc0 R08: 00007f86541b9920 R09: 0000000000000009 [ +0.000004] R10: 0000000000000004 R11: 0000000000000217 R12: 00007f865406c6b0 [ +0.000003] R13: 00007f86541b5290 R14: 00007f865410b700 R15: 000055bb9ddcbc18 [ +0.000009] </TASK> Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3729 Reported-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Co-developed-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Signed-off-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ab75a0d2e07942ae15d32c0a5092fd336451378c) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: increase MAX_SURFACES to the value supported by hwMelissa Wen
As the hw supports up to 4 surfaces, increase the maximum number of surfaces to prevent the DC error when trying to use more than three planes. [drm:dc_state_add_plane [amdgpu]] *ERROR* Surface: can not attach plane_state 000000003e2cb82c! Maximum is: 3 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit b8d6daffc871a42026c3c20bff7b8fa0302298c1) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: fix page fault due to max surface definition mismatchMelissa Wen
DC driver is using two different values to define the maximum number of surfaces: MAX_SURFACES and MAX_SURFACE_NUM. Consolidate MAX_SURFACES as the unique definition for surface updates across DC. It fixes page fault faced by Cosmic users on AMD display versions that support two overlay planes, since the introduction of cursor overlay mode. [Nov26 21:33] BUG: unable to handle page fault for address: 0000000051d0f08b [ +0.000015] #PF: supervisor read access in kernel mode [ +0.000006] #PF: error_code(0x0000) - not-present page [ +0.000005] PGD 0 P4D 0 [ +0.000007] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 4 PID: 71 Comm: kworker/u32:6 Not tainted 6.10.0+ #300 [ +0.000006] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000007] Workqueue: events_unbound commit_work [drm_kms_helper] [ +0.000040] RIP: 0010:copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000847] Code: 8b 10 49 89 94 24 f8 00 00 00 48 8b 50 08 49 89 94 24 00 01 00 00 8b 40 10 41 89 84 24 08 01 00 00 49 8b 45 78 48 85 c0 74 0b <0f> b6 00 41 88 84 24 90 64 00 00 49 8b 45 60 48 85 c0 74 3b 48 8b [ +0.000010] RSP: 0018:ffffc203802f79a0 EFLAGS: 00010206 [ +0.000009] RAX: 0000000051d0f08b RBX: 0000000000000004 RCX: ffff9f964f0a8070 [ +0.000004] RDX: ffff9f9710f90e40 RSI: ffff9f96600c8000 RDI: ffff9f964f000000 [ +0.000004] RBP: ffffc203802f79f8 R08: 0000000000000000 R09: 0000000000000000 [ +0.000005] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f96600c8000 [ +0.000004] R13: ffff9f9710f90e40 R14: ffff9f964f000000 R15: ffff9f96600c8000 [ +0.000004] FS: 0000000000000000(0000) GS:ffff9f9970000000(0000) knlGS:0000000000000000 [ +0.000005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000005] CR2: 0000000051d0f08b CR3: 00000002e6a20000 CR4: 0000000000350ef0 [ +0.000005] Call Trace: [ +0.000011] <TASK> [ +0.000010] ? __die_body.cold+0x19/0x27 [ +0.000012] ? page_fault_oops+0x15a/0x2d0 [ +0.000014] ? exc_page_fault+0x7e/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000739] ? dc_commit_state_no_check+0xd6c/0xe70 [amdgpu] [ +0.000470] update_planes_and_stream_state+0x49b/0x4f0 [amdgpu] [ +0.000450] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? commit_minimal_transition_state+0x239/0x3d0 [amdgpu] [ +0.000446] update_planes_and_stream_v2+0x24a/0x590 [amdgpu] [ +0.000464] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? sort+0x31/0x50 [ +0.000007] ? amdgpu_dm_atomic_commit_tail+0x159f/0x3a30 [amdgpu] [ +0.000508] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? amdgpu_crtc_get_scanout_position+0x28/0x40 [amdgpu] [ +0.000377] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x160/0x390 [drm] [ +0.000058] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_default_wait+0x8c/0x260 [ +0.000010] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? wait_for_completion_timeout+0x13b/0x170 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_wait_timeout+0x108/0x140 [ +0.000010] ? commit_tail+0x94/0x130 [drm_kms_helper] [ +0.000024] ? process_one_work+0x177/0x330 [ +0.000008] ? worker_thread+0x266/0x3a0 [ +0.000006] ? __pfx_worker_thread+0x10/0x10 [ +0.000004] ? kthread+0xd2/0x100 [ +0.000006] ? __pfx_kthread+0x10/0x10 [ +0.000006] ? ret_from_fork+0x34/0x50 [ +0.000004] ? __pfx_kthread+0x10/0x10 [ +0.000005] ? ret_from_fork_asm+0x1a/0x30 [ +0.000011] </TASK> Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Suggested-by: Leo Li <sunpeng.li@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1c86c81a86c60f9b15d3e3f43af0363cf56063e7) Cc: stable@vger.kernel.org
2025-01-06drm/amd/display: Remove unnecessary amdgpu_irq_get/putAlex Hung
[WHY & HOW] commit 7fb363c57522 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts") lets drm_crtc_vblank_* to manage interrupts in amdgpu_dm_crtc_set_vblank, and amdgpu_irq_get/put do not need to be called here. Part of that patch got lost somehow, so fix it up. Fixes: 7fb363c57522 ("drm/amd/display: Let drm_crtc_vblank_on/off manage interrupts") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3782305ce5807c18fbf092124b9e8303cf1723ae) Cc: stable@vger.kernel.org
2025-01-06Merge tag 'vfs-6.13-rc7.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Relax assertions on failure to encode file handles The ->encode_fh() method can fail for various reasons. None of them warrant a WARN_ON(). - Fix overlayfs file handle encoding by allowing encoding an fid from an inode without an alias - Make sure fuse_dir_open() handles FOPEN_KEEP_CACHE. If it's not specified fuse needs to invaludate the directory inode page cache - Fix qnx6 so it builds with gcc-15 - Various fixes for netfslib and ceph and nfs filesystems: - Ignore silly rename files from afs and nfs when building header archives - Fix read result collection in netfslib with multiple subrequests - Handle ENOMEM for netfslib buffered reads - Fix oops in nfs_netfs_init_request() - Parse the secctx command immediately in cachefiles - Remove a redundant smp_rmb() in netfslib - Handle recursion in read retry in netfslib - Fix clearing of folio_queue - Fix missing cancellation of copy-to_cache when the cache for a file is temporarly disabled in netfslib - Sanity check the hfs root record - Fix zero padding data issues in concurrent write scenarios - Fix is_mnt_ns_file() after converting nsfs to path_from_stashed() - Fix missing declaration of init_files - Increase I/O priority when writing revoke records in jbd2 - Flush filesystem device before updating tail sequence in jbd2 * tag 'vfs-6.13-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits) ovl: support encoding fid from inode with no alias ovl: pass realinode to ovl_encode_real_fh() instead of realdentry fuse: respect FOPEN_KEEP_CACHE on opendir netfs: Fix is-caching check in read-retry netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled netfs: Fix ceph copy to cache on write-begin netfs: Work around recursion by abandoning retry if nothing read netfs: Fix missing barriers by using clear_and_wake_up_bit() netfs: Remove redundant use of smp_rmb() cachefiles: Parse the "secctx" immediately nfs: Fix oops in nfs_netfs_init_request() when copying to cache netfs: Fix enomem handling in buffered reads netfs: Fix non-contiguous donation between completed reads kheaders: Ignore silly-rename files fs: relax assertions on failure to encode file handles fs: fix missing declaration of init_files fs: fix is_mnt_ns_file() iomap: fix zero padding data issue in concurrent append writes iomap: pass byte granular end position to iomap_add_to_ioend jbd2: flush filesystem device before updating tail sequence ...
2025-01-06btrfs: zlib: fix avail_in bytes for s390 zlib HW compression pathMikhail Zaslonko
Since the input data length passed to zlib_compress_folios() can be arbitrary, always setting strm.avail_in to a multiple of PAGE_SIZE may cause read-in bytes to exceed the input range. Currently this triggers an assert in btrfs_compress_folios() on the debug kernel (see below). Fix strm.avail_in calculation for S390 hardware acceleration path. assertion failed: *total_in <= orig_len, in fs/btrfs/compression.c:1041 ------------[ cut here ]------------ kernel BUG at fs/btrfs/compression.c:1041! monitor event: 0040 ilc:2 [#1] PREEMPT SMP CPU: 16 UID: 0 PID: 325 Comm: kworker/u273:3 Not tainted 6.13.0-20241204.rc1.git6.fae3b21430ca.300.fc41.s390x+debug #1 Hardware name: IBM 3931 A01 703 (z/VM 7.4.0) Workqueue: btrfs-delalloc btrfs_work_helper Krnl PSW : 0704d00180000000 0000021761df6538 (btrfs_compress_folios+0x198/0x1a0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 0000000080000000 0000000000000001 0000000000000047 0000000000000000 0000000000000006 ffffff01757bb000 000001976232fcc0 000000000000130c 000001976232fcd0 000001976232fcc8 00000118ff4a0e30 0000000000000001 00000111821ab400 0000011100000000 0000021761df6534 000001976232fb58 Krnl Code: 0000021761df6528: c020006f5ef4 larl %r2,0000021762be2310 0000021761df652e: c0e5ffbd09d5 brasl %r14,00000217615978d8 #0000021761df6534: af000000 mc 0,0 >0000021761df6538: 0707 bcr 0,%r7 0000021761df653a: 0707 bcr 0,%r7 0000021761df653c: 0707 bcr 0,%r7 0000021761df653e: 0707 bcr 0,%r7 0000021761df6540: c004004bb7ec brcl 0,000002176276d518 Call Trace: [<0000021761df6538>] btrfs_compress_folios+0x198/0x1a0 ([<0000021761df6534>] btrfs_compress_folios+0x194/0x1a0) [<0000021761d97788>] compress_file_range+0x3b8/0x6d0 [<0000021761dcee7c>] btrfs_work_helper+0x10c/0x160 [<0000021761645760>] process_one_work+0x2b0/0x5d0 [<000002176164637e>] worker_thread+0x20e/0x3e0 [<000002176165221a>] kthread+0x15a/0x170 [<00000217615b859c>] __ret_from_fork+0x3c/0x60 [<00000217626e72d2>] ret_from_fork+0xa/0x38 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000021761597924>] _printk+0x4c/0x58 Kernel panic - not syncing: Fatal exception: panic_on_oops Fixes: fd1e75d0105d ("btrfs: make compression path to be subpage compatible") CC: stable@vger.kernel.org # 6.12+ Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-01-06btrfs: zoned: calculate max_extent_size properly on non-zoned setupChristoph Hellwig
Since commit 559218d43ec9 ("block: pre-calculate max_zone_append_sectors"), queue_limits's max_zone_append_sectors is default to be 0 and it is only updated when there is a zoned device. So, we have lim->max_zone_append_sectors = 0 when there is no zoned device in the filesystem. That leads to fs_info->max_zone_append_size and thus fs_info->max_extent_size to be 0, which is wrong and can for example lead to a divide by zero in count_max_extents(). Fix this by only capping fs_info->max_extent_size to fs_info->max_zone_append_size when it is non-zero. Based on a patch from Naohiro Aota <naohiro.aota@wdc.com>, from which much of this commit message is stolen as well. Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Fixes: 559218d43ec9 ("block: pre-calculate max_zone_append_sectors") Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com>
2025-01-06btrfs: avoid NULL pointer dereference if no valid extent treeQu Wenruo
[BUG] Syzbot reported a crash with the following call trace: BTRFS info (device loop0): scrub: started on devid 1 BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs] scrub_simple_mirror+0x175/0x260 [btrfs] scrub_stripe+0x5d4/0x6c0 [btrfs] scrub_chunk+0xbb/0x170 [btrfs] scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs] btrfs_scrub_dev+0x240/0x600 [btrfs] btrfs_ioctl+0x1dc8/0x2fa0 [btrfs] ? do_sys_openat2+0xa5/0xf0 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [CAUSE] The reproducer is using a corrupted image where extent tree root is corrupted, thus forcing to use "rescue=all,ro" mount option to mount the image. Then it triggered a scrub, but since scrub relies on extent tree to find where the data/metadata extents are, scrub_find_fill_first_stripe() relies on an non-empty extent root. But unfortunately scrub_find_fill_first_stripe() doesn't really expect an NULL pointer for extent root, it use extent_root to grab fs_info and triggered a NULL pointer dereference. [FIX] Add an extra check for a valid extent root at the beginning of scrub_find_fill_first_stripe(). The new error path is introduced by 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots"), but that's pretty old, and later commit b979547513ff ("btrfs: scrub: introduce helper to find and fill sector info for a scrub_stripe") changed how we do scrub. So for kernels older than 6.6, the fix will need manual backport. Reported-by: syzbot+339e9dbe3a2ca419b85d@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/67756935.050a0220.25abdd.0a12.GAE@google.com/ Fixes: 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots") Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2025-01-06Merge tag 'vfio-v6.13-rc7' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson: - Fix a missed order alignment requirement of the pfn when inserting mappings through the new huge fault handler introduced in v6.12 (Alex Williamson) * tag 'vfio-v6.13-rc7' of https://github.com/awilliam/linux-vfio: vfio/pci: Fallback huge faults for unaligned pfn
2025-01-06Merge patch series "Fix encoding overlayfs fid for fanotify delete events"Christian Brauner
Amir Goldstein <amir73il@gmail.com> says: This is a followup fix to the reported regression [1] that was introduced by overlayfs non-decodable file handles support in v6.6. The first fix posted two weeks ago [2] was a quick band aid which is justified on its own and is still queued on your vfs.fixes branch. This followup fix fixes the root cause of overlayfs file handle encoding failure and it also solves a bug with fanotify FAN_DELETE_SELF events on overlayfs, that was discovered from analysis of the first report. The fix to fanotify delete events was verified with a new LTP test [3]. [1] https://lore.kernel.org/linux-fsdevel/CAOQ4uxiie81voLZZi2zXS1BziXZCM24nXqPAxbu8kxXCUWdwOg@mail.gmail.com/ [2] https://lore.kernel.org/linux-fsdevel/20241219115301.465396-1-amir73il@gmail.com/ [3] https://github.com/amir73il/ltp/commits/ovl_encode_fid/ * patches from https://lore.kernel.org/r/20250105162404.357058-1-amir73il@gmail.com: ovl: support encoding fid from inode with no alias ovl: pass realinode to ovl_encode_real_fh() instead of realdentry Link: https://lore.kernel.org/r/20250105162404.357058-1-amir73il@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-06ovl: support encoding fid from inode with no aliasAmir Goldstein
Dmitry Safonov reported that a WARN_ON() assertion can be trigered by userspace when calling inotify_show_fdinfo() for an overlayfs watched inode, whose dentry aliases were discarded with drop_caches. The WARN_ON() assertion in inotify_show_fdinfo() was removed, because it is possible for encoding file handle to fail for other reason, but the impact of failing to encode an overlayfs file handle goes beyond this assertion. As shown in the LTP test case mentioned in the link below, failure to encode an overlayfs file handle from a non-aliased inode also leads to failure to report an fid with FAN_DELETE_SELF fanotify events. As Dmitry notes in his analyzis of the problem, ovl_encode_fh() fails if it cannot find an alias for the inode, but this failure can be fixed. ovl_encode_fh() seldom uses the alias and in the case of non-decodable file handles, as is often the case with fanotify fid info, ovl_encode_fh() never needs to use the alias to encode a file handle. Defer finding an alias until it is actually needed so ovl_encode_fh() will not fail in the common case of FAN_DELETE_SELF fanotify events. Fixes: 16aac5ad1fa9 ("ovl: support encoding non-decodable file handles") Reported-by: Dmitry Safonov <dima@arista.com> Closes: https://lore.kernel.org/linux-fsdevel/CAOQ4uxiie81voLZZi2zXS1BziXZCM24nXqPAxbu8kxXCUWdwOg@mail.gmail.com/ Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20250105162404.357058-3-amir73il@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-06ovl: pass realinode to ovl_encode_real_fh() instead of realdentryAmir Goldstein
We want to be able to encode an fid from an inode with no alias. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Link: https://lore.kernel.org/r/20250105162404.357058-2-amir73il@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-01-06Merge tag 'exfat-for-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat Pull exfat fixes from Namjae Jeon: "All fixes are for issues reported by syzbot: - Fix wrong error return in exfat_find_empty_entry() - Fix a endless loop by self-linked chain - fix a KMSAN uninit-value issue in exfat_extend_valid_size()" * tag 'exfat-for-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: fix the infinite loop in __exfat_free_cluster() exfat: fix the new buffer was not zeroed before writing exfat: fix the infinite loop in exfat_readdir() exfat: fix exfat_find_empty_entry() not returning error on failure
2025-01-06Revert "vmstat: disable vmstat_work on vmstat_cpu_down_prep()"Linus Torvalds
This reverts commit adcfb264c3ed51fbbf5068ddf10d309a63683868. It turns out this just causes a different warning splat instead that seems to be much easier to trigger, so let's revert ASAP. Reported-and-bisected-by: Borislav Petkov <bp@alien8.de> Tested-by: Breno Leitao <leitao@debian.org> Reported-by: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/all/20250106131817.GAZ3vYGVr3-hWFFPLj@fat_crate.local/ Cc: Koichiro Den <koichiro.den@canonical.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-01-06regulator: Move OF_ API declarations/definitions outside CONFIG_REGULATORManivannan Sadhasivam
Since these are hidden inside CONFIG_REGULATOR, building the consumer drivers without CONFIG_REGULATOR will result in the following build error: >> drivers/pci/pwrctrl/slot.c:39:15: error: implicit declaration of function 'of_regulator_bulk_get_all'; did you mean 'regulator_bulk_get'? [-Werror=implicit-function-declaration] 39 | ret = of_regulator_bulk_get_all(dev, dev_of_node(dev), | ^~~~~~~~~~~~~~~~~~~~~~~~~ | regulator_bulk_get cc1: some warnings being treated as errors This also removes the duplicated definitions that were possibly added to fix the build issues. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202501020407.HmQQQKa0-lkp@intel.com/ Fixes: 27b9ecc7a9ba ("regulator: Add of_regulator_bulk_get_all") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://patch.msgid.link/20250104115058.19216-3-manivannan.sadhasivam@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-06regulator: Guard of_regulator_bulk_get_all() with CONFIG_OFManivannan Sadhasivam
Since the definition is in drivers/regulator/of_regulator.c and compiled only if CONFIG_OF is enabled, building the consumer driver without CONFIG_OF and with CONFIG_REGULATOR will result in below build error: ERROR: modpost: "of_regulator_bulk_get_all" [drivers/pci/pwrctrl/pci-pwrctl-slot.ko] undefined! Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412181640.12Iufkvd-lkp@intel.com/ Fixes: 27b9ecc7a9ba ("regulator: Add of_regulator_bulk_get_all") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://patch.msgid.link/20250104115058.19216-2-manivannan.sadhasivam@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-06btrfs: don't read from userspace twice in btrfs_uring_encoded_read()Mark Harmstone
If we return -EAGAIN the first time because we need to block, btrfs_uring_encoded_read() will get called twice. Take a copy of args, the iovs, and the iter the first time, as by the time we are called the second time these may have gone out of scope. Reported-by: Jens Axboe <axboe@kernel.dk> Fixes: 34310c442e17 ("btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)") Signed-off-by: Mark Harmstone <maharmstone@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit (git 2.34.1) at 2025-09-11 18:43:18 +0000