summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-11net/mlx5: Disable devlink reload for multi port slave deviceShay Drory
Devlink reload can't be allowed on a multi port slave device, because reload of slave device doesn't take effect. The right flow is to disable devlink reload for multi port slave device. Hence, disabling it in mlx5_core probing. Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-11net/mlx5e: kTLS, Use refcounts to free kTLS RX priv contextMaxim Mikityanskiy
wait_for_resync is unreliable - if it timeouts, priv_rx will be freed anyway. However, mlx5e_ktls_handle_get_psv_completion will be called sooner or later, leading to use-after-free. For example, it can happen if a CQ error happened, and ICOSQ stopped, but later on the queues are destroyed, and ICOSQ is flushed with mlx5e_free_icosq_descs. This patch converts the lifecycle of priv_rx to fully refcount-based, so that the struct won't be freed before the refcount goes to zero. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-11net/mlx5e: Fix CQ params of ICOSQ and async ICOSQMaxim Mikityanskiy
The commit mentioned below has split the parameters of ICOSQ and async ICOSQ, but it contained a typo: the CQ parameters were swapped for ICOSQ and async ICOSQ. Async ICOSQ is longer than the normal ICOSQ, and the CQ size must be the same as the size of the corresponding SQ, but due to this bug, the CQ of async ICOSQ was much shorter than async ICOSQ itself. It led to overflows of the CQ with such messages in dmesg, in particular, when running multiple kTLS-offloaded streams: mlx5_core 0000:08:00.0: cq_err_event_notifier:529:(pid 9422): CQ error on CQN 0x406, syndrome 0x1 mlx5_core 0000:08:00.0 eth2: mlx5e_cq_error_event: cqn=0x000406 event=0x04 This commit fixes the issue by using the corresponding parameters for ICOSQ and async ICOSQ. Fixes: c293ac927fbb ("net/mlx5e: Refactor build channel params") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-11net/mlx5e: Replace synchronize_rcu with synchronize_netMaxim Mikityanskiy
The commit cited below switched from using napi_synchronize to synchronize_rcu to have a guarantee that it will finish in finite time. However, on average, synchronize_rcu takes more time than napi_synchronize. Given that it's called multiple times per channel on deactivation, it accumulates to a significant amount, which causes timeouts in some applications (for example, when using bonding with NetworkManager). This commit replaces synchronize_rcu with synchronize_net, which is faster when called under rtnl_lock, allowing to speed up the described flow. Fixes: 9c25a22dfb00 ("net/mlx5e: Use synchronize_rcu to sync with NAPI") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-11net/mlx5: Fix health error state handlingShay Drory
Currently, when we discover a fatal error, we are queueing a work that will wait for a lock in order to enter the device to error state. Meanwhile, FW commands are still being processed, and gets timeouts. This can block the driver for few minutes before the work will manage to get the lock and enter to error state. Setting the device to error state before queueing health work, in order to avoid FW commands being processed while the work is waiting for the lock. Fixes: c1d4d2e92ad6 ("net/mlx5: Avoid calling sleeping function by the health poll thread") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-11net/mlx5e: Change interrupt moderation channel params also when channels are ↵Maxim Mikityanskiy
closed struct mlx5e_params contains fields ({rx,tx}_cq_moderation) that depend on two things: whether DIM is enabled and the state of a private flag (MLX5E_PFLAG_{RX,TX}_CQE_BASED_MODER). Whenever the DIM state changes, mlx5e_reset_{rx,tx}_moderation is called to update the fields, however, only if the channels are open. The flow where the channels are closed misses the required update of the fields. This commit moves the calls of mlx5e_reset_{rx,tx}_moderation, so that they run in both flows. Fixes: ebeaf084ad5c ("net/mlx5e: Properly set default values when disabling adaptive moderation") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-11net/mlx5e: Don't change interrupt moderation params when DIM is enabledMaxim Mikityanskiy
When mlx5e_ethtool_set_coalesce doesn't change DIM state (enabled/disabled), it calls mlx5e_set_priv_channels_coalesce unconditionally, which in turn invokes a firmware command to set interrupt moderation parameters. It shouldn't happen while DIM manages those parameters dynamically (it might even be happening at the same time). This patch fixes it by splitting mlx5e_set_priv_channels_coalesce into two functions (for RX and TX) and calling them only when DIM is disabled (for RX and TX respectively). Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-11net/mlx5e: Enable XDP for Connect-X IPsec capable devicesRaed Salem
This limitation was inherited by previous Innova (FPGA) IPsec implementation, it uses its private set of RQ handlers which does not support XDP, for Connect-X this is no longer true. Fix by keeping this limitation only for Innova IPsec supporting devices, as otherwise this limitation effectively wrongly blocks XDP for all future Connect-X devices for all flows even if IPsec offload is not used. Fixes: 2d64663cd559 ("net/mlx5: IPsec: Add HW crypto offload support") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-11net/mlx5e: Enable striding RQ for Connect-X IPsec capable devicesRaed Salem
This limitation was inherited by previous Innova (FPGA) IPsec implementation, it uses its private set of RQ handlers which does not support striding rq, for Connect-X this is no longer true. Fix by keeping this limitation only for Innova IPsec supporting devices, as otherwise this limitation effectively wrongly blocks striding RQs for all future Connect-X devices for all flows even if IPsec offload is not used. Fixes: 2d64663cd559 ("net/mlx5: IPsec: Add HW crypto offload support") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-11net/mlx5e: E-switch, Fix rate calculation for overflowParav Pandit
rate_bytes_ps is a 64-bit field. It passed as 32-bit field to apply_police_params(). Due to this when police rate is higher than 4Gbps, 32-bit calculation ignores the carry. This results in incorrect rate configurationn the device. Fix it by performing 64-bit calculation. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-11Merge branch 'mptcp-Miscellaneous-fixes'David S. Miller
Mat Martineau says: ==================== mptcp: Miscellaneous fixes Here are some MPTCP fixes for the -net tree, addressing various issues we have seen thanks to syzkaller and other testing: Patch 1 correctly propagates errors at connection time and for TCP fallback connections. Patch 2 sets the expected poll() events on SEND_SHUTDOWN. Patch 3 fixes a retranmit crash and unneeded retransmissions. Patch 4 fixes possible uninitialized data on the error path during socket creation. Patch 5 addresses a problem with MPTCP window updates. Patch 6 fixes a case where MPTCP retransmission can get stuck. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11mptcp: add a missing retransmission timer schedulingPaolo Abeni
Currently we do not schedule the MPTCP retransmission timer after pushing the data when such action happens in the subflow context. This may cause hang-up on active-backup scenarios, or even when only single subflow msks are involved, if we lost some peer's ack. Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11mptcp: better msk receive window updatesPaolo Abeni
Move mptcp_cleanup_rbuf() related checks inside the mentioned helper and extend them to mirror TCP checks more closely. Additionally drop the 'rmem_pending' hack, since commit 879526030c8b ("mptcp: protect the rx path with the msk socket spinlock") we can use instead 'rmem_released'. Fixes: ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11mptcp: init mptcp request socket earlierPaolo Abeni
The mptcp subflow route_req() callback performs the subflow req initialization after the route_req() check. If the latter fails, mptcp-specific bits of the current request sockets are left uninitialized. The above causes bad things at req socket disposal time, when the mptcp resources are cleared. This change addresses the issue by splitting subflow_init_req() into the actual initialization and the mptcp-specific checks. The initialization is moved before any possibly failing check. Reported-by: Christoph Paasch <cpaasch@apple.com> Fixes: 7ea851d19b23 ("tcp: merge 'init_req' and 'route_req' functions") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11mptcp: fix spurious retransmissionsPaolo Abeni
Syzkaller was able to trigger the following splat again: WARNING: CPU: 1 PID: 12512 at net/mptcp/protocol.c:761 mptcp_reset_timer+0x12a/0x160 net/mptcp/protocol.c:761 Modules linked in: CPU: 1 PID: 12512 Comm: kworker/1:6 Not tainted 5.10.0-rc6 #52 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:mptcp_reset_timer+0x12a/0x160 net/mptcp/protocol.c:761 Code: e8 4b 0c ad ff e8 56 21 88 fe 48 b8 00 00 00 00 00 fc ff df 48 c7 04 03 00 00 00 00 48 83 c4 40 5b 5d 41 5c c3 e8 36 21 88 fe <0f> 0b 41 bc c8 00 00 00 eb 98 e8 e7 b1 af fe e9 30 ff ff ff 48 c7 RSP: 0018:ffffc900018c7c68 EFLAGS: 00010293 RAX: ffff888108cb1c80 RBX: 1ffff92000318f8d RCX: ffffffff82ad0307 RDX: 0000000000000000 RSI: ffffffff82ad036a RDI: 0000000000000007 RBP: ffff888113e2d000 R08: ffff888108cb1c80 R09: ffffed10227c5ab7 R10: ffff888113e2d5b7 R11: ffffed10227c5ab6 R12: 0000000000000000 R13: ffff88801f100000 R14: ffff888113e2d5b0 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88811b500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd76a874ef8 CR3: 000000001689c005 CR4: 0000000000170ee0 Call Trace: mptcp_worker+0xaa4/0x1560 net/mptcp/protocol.c:2334 process_one_work+0x8d3/0x1200 kernel/workqueue.c:2272 worker_thread+0x9c/0x1090 kernel/workqueue.c:2418 kthread+0x303/0x410 kernel/kthread.c:292 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:296 The mptcp_worker tries to update the MPTCP retransmission timer even if such timer is not currently scheduled. The mptcp_rtx_head() return value is bogus: we can have enqueued data not yet transmitted. The above may additionally cause spurious, unneeded MPTCP-level retransmissions. Fix the issue adding an explicit clearing of the rtx queue before trying to retransmit and checking for unacked data. Additionally drop an unneeded timer stop call and the unused mptcp_rtx_tail() helper. Reported-by: Christoph Paasch <cpaasch@apple.com> Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11mptcp: fix poll after shutdownPaolo Abeni
The current mptcp_poll() implementation gives unexpected results after shutdown(SEND_SHUTDOWN) and when the msk status is TCP_CLOSE. Set the correct mask. Fixes: 8edf08649eed ("mptcp: rework poll+nospace handling") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11mptcp: deliver ssk errors to mskPaolo Abeni
Currently all errors received on msk subflows are ignored. We need to catch at least the errors on connect() and on fallback sockets. Use a custom sk_error_report callback at subflow level, and do the real action under the msk socket lock - via the usual sock_owned_by_user()/release_callback() schema. Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: phy: consider that suspend2ram may cut off PHY powerHeiner Kallweit
Claudiu reported that on his system S2R cuts off power to the PHY and after resuming certain PHY settings are lost. The PM folks confirmed that cutting off power to selected components in S2R is a valid case. Therefore resuming from S2R, same as from hibernation, has to assume that the PHY has power-on defaults. As a consequence use the restore callback also as resume callback. In addition make sure that the interrupt configuration is restored. Let's do this in phy_init_hw() and ensure that after this call actual interrupt configuration is in sync with phydev->interrupts. Currently, if interrupt was enabled before hibernation, we would resume with interrupt disabled because that's the power-on default. This fix applies cleanly only after the commit marked as fixed. I don't have an affected system, therefore change is compile-tested only. [0] https://lore.kernel.org/netdev/1610120754-14331-1-git-send-email-claudiu.beznea@microchip.com/ Fixes: 611d779af7ca ("net: phy: fix MDIO bus PM PHY resuming") Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11tcp: Sanitize CMSG flags and reserved args in tcp_zerocopy_receive.Arjun Roy
Explicitly define reserved field and require it and any subsequent fields to be zero-valued for now. Additionally, limit the valid CMSG flags that tcp_zerocopy_receive accepts. Fixes: 7eeba1706eba ("tcp: Add receive timestamp support for receive zerocopy.") Signed-off-by: Arjun Roy <arjunroy@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Suggested-by: David Ahern <dsahern@gmail.com> Suggested-by: Leon Romanovsky <leon@kernel.org> Suggested-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11r8169: handle tx before rx in napi pollHeiner Kallweit
Cleaning up tx descriptors first increases the chance that rtl_rx() can allocate new skb's from the cache. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11dpaa2-eth: fix memory leak in XDP_REDIRECTIoana Ciornei
If xdp_do_redirect() fails, the calling driver should handle recycling or freeing of the page associated with the frame. The dpaa2-eth driver didn't do either of them and just incremented a counter. Fix this by trying to DMA map back the page and recycle it or, if the mapping fails, just free it. Fixes: d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: fix dev_ifsioc_locked() race conditionCong Wang
dev_ifsioc_locked() is called with only RCU read lock, so when there is a parallel writer changing the mac address, it could get a partially updated mac address, as shown below: Thread 1 Thread 2 // eth_commit_mac_addr_change() memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); // dev_ifsioc_locked() memcpy(ifr->ifr_hwaddr.sa_data, dev->dev_addr,...); Close this race condition by guarding them with a RW semaphore, like netdev_get_name(). We can not use seqlock here as it does not allow blocking. The writers already take RTNL anyway, so this does not affect the slow path. To avoid bothering existing dev_set_mac_address() callers in drivers, introduce a new wrapper just for user-facing callers on ioctl and rtnetlink paths. Note, bonding also changes slave mac addresses but that requires a separate patch due to the complexity of bonding code. Fixes: 3710becf8a58 ("net: RCU locking for simple ioctl()") Reported-by: "Gong, Sishuai" <sishuai@purdue.edu> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11enetc: auto select PHYLIB and MDIO_DEVRESTong Zhang
FSL_ENETC_MDIO use symbols from PHYLIB (MDIO_BUS) and MDIO_DEVRES, however there are no dependency specified in Kconfig ERROR: modpost: "__mdiobus_register" [drivers/net/ethernet/freescale/enetc/fsl-enetc-mdio.ko] undefined! ERROR: modpost: "mdiobus_unregister" [drivers/net/ethernet/freescale/enetc/fsl-enetc-mdio.ko] undefined! ERROR: modpost: "devm_mdiobus_alloc_size" [drivers/net/ethernet/freescale/enetc/fsl-enetc-mdio.ko] undefined! add depends on MDIO_DEVRES && MDIO_BUS Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: fix interrupt mask/unmask skip conditionStefan Chulski
The condition should be skipped if CPU ID equal to nthreads. The patch doesn't fix any actual issue since nthreads = min_t(unsigned int, num_present_cpus(), MVPP2_MAX_THREADS). On all current Armada platforms, the number of CPU's is less than MVPP2_MAX_THREADS. Fixes: e531f76757eb ("net: mvpp2: handle cases where more CPUs are available than s/w threads") Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch 'am65-cpsw-nuss-switchdev-driver'David S. Miller
Vignesh Raghavendra says: ==================== net: ti: am65-cpsw-nuss: Add switchdev driver This series adds switchdev support for AM65 CPSW NUSS driver to support multi port CPSW present on J721e and AM64 SoCs. It adds devlink hook to switch b/w switch mode and multi mac mode. v2: Rebased on latest net-next Update patch 1/4 with rationale for using devlink ====================
2021-02-11docs: networking: ti: Add driver doc for AM65 NUSS switch driverVignesh Raghavendra
J721e, J7200 and AM64 have multi port switches which can work in multi mac mode and in switch mode. Add documentation explaining how to use different modes. Borrowed from: Documentation/networking/device_drivers/ethernet/ti/cpsw_switchdev.rst Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: ti: am65-cpsw-nuss: Add switchdev supportVignesh Raghavendra
J721e, J7200 and AM64 have multi port switches which can work in multi mac mode and in switch mode. Add support for configuring this HW in switch mode using devlink and switchdev notifiers. Support is similar to existing CPSW switchdev implementation of TI's 32 bit platform like AM33/AM43/AM57. To enable switch mode: devlink dev param set platform/8000000.ethernet name switch_mode value true cmode runtime All configuration is implemented via switchdev API and notifiers. Supported: - SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS - SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS - SWITCHDEV_ATTR_ID_PORT_STP_STATE - SWITCHDEV_OBJ_ID_PORT_VLAN - SWITCHDEV_OBJ_ID_PORT_MDB - SWITCHDEV_OBJ_ID_HOST_MDB Hence AM65 CPSW switchdev driver supports: - FDB offloading - MDB offloading - VLAN filtering and offloading - STP Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: ti: am65-cpsw-nuss: Add netdevice notifiersVignesh Raghavendra
Register netdevice notifiers in order to receive notification when individual MAC ports are added to the HW bridge. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: ti: am65-cpsw-nuss: Add devlink supportVignesh Raghavendra
AM65 NUSS ethernet switch on K3 devices can be configured to work either in independent mac mode where each port acts as independent network interface (multi mac) or switch mode. Add devlink hooks to provide a way to switch b/w these modes. Rationale to use devlink instead of defaulting to bridge mode is that SoC use cases require to support multiple independent MAC ports with no switching so that users can use software bridges with multi-mac configuration (e.g: to support LAG, HSR/PRP, etc). Also, switching between multi mac and switch mode requires significant Port and ALE reconfiguration, therefore is easier to be made as part of mode change devlink hooks. It also allows to keep user interface similar to what was implemented for the previous generation of TI CPSW IP (on AM33/AM43/AM57 SoCs). Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11selftests/bpf: Add a selftest for the tracing bpf_get_socket_cookieFlorent Revest
This builds up on the existing socket cookie test which checks whether the bpf_get_socket_cookie helpers provide the same value in cgroup/connect6 and sockops programs for a socket created by the userspace part of the test. Instead of having an update_cookie sockops program tag a socket local storage with 0xFF, this uses both an update_cookie_sockops program and an update_cookie_tracing program which succesively tag the socket with 0x0F and then 0xF0. Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: KP Singh <kpsingh@kernel.org> Link: https://lore.kernel.org/bpf/20210210111406.785541-5-revest@chromium.org
2021-02-11selftests/bpf: Use vmlinux.h in socket_cookie_prog.cFlorent Revest
When migrating from the bpf.h's to the vmlinux.h's definition of struct bps_sock, an interesting LLVM behavior happened. LLVM started producing two fetches of ctx->sk in the sockops program this means that the verifier could not keep track of the NULL-check on ctx->sk. Therefore, we need to extract ctx->sk in a variable before checking and dereferencing it. Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: KP Singh <kpsingh@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210210111406.785541-4-revest@chromium.org
2021-02-11selftests/bpf: Integrate the socket_cookie test to test_progsFlorent Revest
Currently, the selftest for the BPF socket_cookie helpers is built and run independently from test_progs. It's easy to forget and hard to maintain. This patch moves the socket cookies test into prog_tests/ and vastly simplifies its logic by: - rewriting the loading code with BPF skeletons - rewriting the server/client code with network helpers - rewriting the cgroup code with test__join_cgroup - rewriting the error handling code with CHECKs Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: KP Singh <kpsingh@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210210111406.785541-3-revest@chromium.org
2021-02-11bpf: Expose bpf_get_socket_cookie to tracing programsFlorent Revest
This needs a new helper that: - can work in a sleepable context (using sock_gen_cookie) - takes a struct sock pointer and checks that it's not NULL Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: KP Singh <kpsingh@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210210111406.785541-2-revest@chromium.org
2021-02-11bpf: Be less specific about socket cookies guaranteesFlorent Revest
Since "92acdc58ab11 bpf, net: Rework cookie generator as per-cpu one" socket cookies are not guaranteed to be non-decreasing. The bpf_get_socket_cookie helper descriptions are currently specifying that cookies are non-decreasing but we don't want users to rely on that. Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Florent Revest <revest@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: KP Singh <kpsingh@kernel.org> Link: https://lore.kernel.org/bpf/20210210111406.785541-1-revest@chromium.org
2021-02-12Merge tag 'drm-intel-fixes-2021-02-11' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.11 final: - Ensure Type-C FIA is powered when initializing - Fix overlay frontbuffer tracking Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87r1lnc78t.fsf@intel.com
2021-02-12Merge tag 'amd-drm-fixes-5.11-2021-02-10' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.11-2021-02-10: amdgpu: - Blank screen fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210210223508.4428-1-alexander.deucher@amd.com
2021-02-11Merge tag 'powerpc-5.11-8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix for a regression seen in io_uring, introduced by our support for KUAP (Kernel User Access Prevention) with the Hash MMU. Thanks to Aneesh Kumar K.V, and Zorro Lang" * tag 'powerpc-5.11-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kuap: Allow kernel thread to access userspace after kthread_use_mm
2021-02-11Merge branch 'bcm4908_enet-post-review-fixes'David S. Miller
Rafał Miłecki says: ==================== bcm4908_enet: post-review fixes V2 of my BCM4908 Ethernet patchset was applied to the net-next.git and it was later that is received some extra reviews. I'm sending patches that handle pointed out issues. David: earler I missed that V2 was applied and I sent V3 and V4 of my inital patchset. Sorry for that. I think it's the best to ignore V3 and V4 I sent and proceed with this fixes patchset instead. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: bcm4908_enet: fix endianness in xmit codeRafał Miłecki
Use le32_to_cpu() for reading __le32 struct field filled by hw. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: bcm4908_enet: fix received skb lengthRafał Miłecki
Use ETH_FCS_LEN instead of magic value and drop incorrect + 2 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: bcm4908_enet: fix minor typosRafał Miłecki
1. Fix "ensable" typo noticed by Andrew 2. Fix chipset name in the struct net_device_ops variable Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: bcm4908_enet: drop "inline" from C functionsRafał Miłecki
It seems preferred to let compiler optimize code if applicable. While at it drop unused enet_umac_maskset(). Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: bcm4908_enet: drop unneeded memset()Rafał Miłecki
dma_alloc_coherent takes care of zeroing allocated memory Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: broadcom: rename BCM4908 driver & update DT bindingRafał Miłecki
compatible string was updated to match normal naming convention so update driver as well Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11dt-bindings: net: bcm4908-enet: include ethernet-controller.yamlRafał Miłecki
It should be /included/ by every Ethernet controller binding. It adds support for various generic properties. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11dt-bindings: net: rename BCM4908 Ethernet bindingRafał Miłecki
Rob pointed out that a normal convention is "brcm,bcm4908-enet" so update whole binding to match it. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernDavid S. Miller
el/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2021-02-11 Here's the main bluetooth-next pull request for 5.12: - Add support for advertising monitor offliading using Microsoft vendor extensions - Add firmware download support for MediaTek MT7921U USB devices - Suspend-related fixes for Qualcomm devices - Add support for Intel GarfieldPeak controller - Various other smaller fixes & cleanups Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch 'marvell-cn10k'David S. Miller
Geetha sowjanya says: ==================== Add Marvell CN10K support The current admin function (AF) driver and the netdev driver supports OcteonTx2 silicon variants. The same OcteonTx2's Resource Virtualization Unit (RVU) is carried forward to the next-gen silicon ie OcteonTx3, with some changes and feature enhancements. This patch set adds support for OcteonTx3 (CN10K) silicon and gets the drivers to the same level as OcteonTx2. No new OcteonTx3 specific features are added. Changes cover below HW level differences - PCIe BAR address changes wrt shared mailbox memory region - Receive buffer freeing to HW - Transmit packet's descriptor submission to HW - Programmable HW interface identifiers (channels) - Increased MTU support - A Serdes MAC block (RPM) configuration v5-v6 Rebased on top of latest net-next branch. v4-v5 Fixed sparse warnings. v3-v4 Fixed compiler warnings. v2-v3 Reposting as a single thread. Rebased on top latest net-next branch. v1-v2 Fixed check-patch reported issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11octeontx2-af: cn10k: MAC internal loopback supportHariprasad Kelam
MAC on CN10K silicon support loopback for selftest or debug purposes. This patch does necessary configuration to loopback packets upon receiving request from LMAC mapped RVU PF's netdev via mailbox. Also MAC (CGX) on OcteonTx2 silicon variants and MAC (RPM) on OcteonTx3 CN10K are different and loopback needs to be configured differently. Upper layer interface between RVU AF and PF netdev is kept same. Based on silicon variant appropriate fn() pointer is called to config the MAC. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11octeontx2-af: cn10k: Add RPM Rx/Tx stats supportHariprasad Kelam
RPM supports below list of counters as an extension to existing counters * class based flow control pause frames * vlan/jabber/fragmented packets * fcs/alignment/oversized error packets This patch adds support to display supported RPM counters via debugfs and define new mbox rpm_stats to read all support counters. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 20:21:54 +0000