summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-07-23MIPS: Enable vmlinuz for JZ4740Lluís Batlle i Rossell
This patch adds support for building a compressed kernel for the JZ4740 architecture. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3563/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: JZ4740: reset: Initialize hibernate wakeup counters.Maarten ter Huurne
In hibernation mode only the wakeup logic and the RTC are left running, so this is what users perceive as power down. If the counters are not initialized, the corresponding pin (typically connected to the power button) has to be asserted for two seconds before the device wakes up. Most users expect a shorter wakeup time. I took the timing values of 100 ms and 60 ms from BouKiCHi's patch for the Dingoo A320 kernel. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3563/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: JZ4740: qi_lb60: Look for NAND chip in bank 1.Maarten ter Huurne
All NanoNotes have their NAND in bank 1. Specifying the bank is required since multi-bank support was introduced. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3561/ Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MTD: NAND: JZ4740: Multi-bank support with autodetectionMaarten ter Huurne
The platform data can now specify which external memory banks to probe for NAND chips, and in which order. Banks that contain a NAND are used and the other banks are freed. Squashed version of development done in jz-2.6.38 branch. Original patch by Lars-Peter Clausen with some bug fixes from me. Thanks to Paul Cercueil for the initial autodetection patch. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3560/ Acked-By: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Fixup ordering of micro assembler instructions.Steven J. Hill
A number of new instructions have been added to the micro assembler causing the list to no longer be in alphabetical order. This patch fixes up the name ordering. Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3789/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Unify memcpy.S and memcpy-inatomic.SDavid Daney
We can save the 451 lines of code that comprise memcpy-inatomic.S at the expense of a single instruction in the memcpy prolog. We also use an additional register (t6), so this may cause increased register pressure in some places as well. But I think the reduced maintenance burden, of not having two nearly identical implementations, makes it worth it. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Octeon: Implement Octeon specific __copy_user_inatomicDavid Daney
The generic version seems to prefetch past the end of memory. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3929/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Malta: Move PIIX4 PCI fixup to where it belongs.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: PCI: Add missing __devinit attributions to fixup functions.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: Use kmemdup rather than duplicating its implementationThomas Meyer
The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3058/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: loongson: use IS_ENABLED()Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3336/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: DEC: use IS_ENABLED()Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3333/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: TX49XX: use IS_ENABLED()Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3335/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: TXX9: use IS_ENABLED() macroFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3334/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: PNX833x: use IS_ENABLED() macroFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3332/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: use IS_ENABLED() macroFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: SMTC: Support for Multi-threaded FPUsSteven J. Hill
Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3603/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Remove dead code related to 1004K oprofile support.Steven J. Hill
Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3854/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Octeon: Use device tree to register serial ports.David Daney
Switch to using the device tree to register serial ports. Add all the ports with compatible = "cavium,octeon-3860-uart". Octeon serial ports have their own device type, required port flags, and I/O functions, so using of_serial.c is not indicated. We need to do this as late_initcall, as the 8250 driver must be initialized before we add any ports. 8250 initialization is done at device_initcall time. The OCTEON_IRQ_UART{0,1,2} symbols are removed as they are now unused and interfere with irq_domain used by the device tree code. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3942/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23staging: octeon_ethernet: Convert to use device tree.David Daney
Get MAC address and PHY connection from the device tree. The driver is converted to a platform driver. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3940/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23netdev: octeon_mgmt: Convert to use device tree.David Daney
The device tree will supply the register bank base addresses, make register addressing relative to those. PHY connection is now described by the device tree. The OCTEON_IRQ_MII{0,1} symbols are also removed as they are now unused and interfere with the irq_domain used for device tree irq mapping. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3941/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23netdev: mdio-octeon.c: Convert to use device tree.David Daney
Get the MDIO bus controller addresses from the device tree, small clean up in use of devm_* Remove, now unused, platform device setup code. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3938/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23i2c: Convert i2c-octeon.c to use device tree.David Daney
There are three parts to this: 1) Remove the definitions of OCTEON_IRQ_TWSI and OCTEON_IRQ_TWSI2. The interrupts are specified by the device tree and these hard coded irq numbers block the used of the irq lines by the irq_domain code. 2) Remove platform device setup code from octeon-platform.c, it is now unused. 3) Convert i2c-octeon.c to use device tree. Part of this includes using the devm_* functions instead of the raw counterparts, thus simplifying error handling. No functionality is changed. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/3939/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Octeon: Setup irq_domains for interrupts.David Daney
Create two domains. One for the GPIO lines, and the other for on-chip sources. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3936/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Octeon: Initialize and fixup device tree.David Daney
If a compiled in device tree template is used, trim out unwanted parts based on legacy platform probing. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3935/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Prune some target specific code out of prom.cDavid Daney
This code is not common enough to be in a shared file. It is also not used by any existing boards, so just remove it. [ralf@linux-mips.org: Dropped removal of irq_create_of_mapping which was already removed by abd2363f6a5f1030b935e0bdc15cf917313b3b10 [irq_domain/mips: Allow irq_domain on MIPS]. Moved device_tree_init() and dependencies to its sole user, the XLP code.] Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: grant.likely@secretlab.ca Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2946/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Octeon: Add device tree source files.David Daney
The two device tree files octeon_3xxx.dts and octeon_68xx.dts are trimmed by code in a subsequent patch to reflect the hardware actually present on the board. To this end several properties that are not part of the declared bindings are added to aid in trimming off unwanted nodes. Since the device tree and the code that trims it are bound into the kernel binary, these 'marker' properties never escape into the wild, and are purely an implementation detail of the kernel early boot process. This is done for backwards compatibility with existing boards (identified by a board type enumeration value by their bootloaders). New boards will always pass a device tree from the bootloader, the built-in trees are ignored in this case. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-kernel@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3937/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23of/lib: Allow scripts/dtc/libfdt to be used from kernel codeDavid Daney
libfdt is part of the device tree support in scripts/dtc/libfdt. For some platforms that use the Device Tree, we want to be able to edit the flattened device tree form. We don't want to burden kernel builds that do not require it, so we gate compilation of libfdt files with CONFIG_LIBFDT. So if it is needed, you need to do this in your Kconfig: select LIBFDT And in the Makefile of the code using libfdt something like: ccflags-y := -I$(src)/../../../scripts/dtc/libfdt Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Grant Likely <grant.likely@secretlab.ca> Cc: linux-kernel@vger.kernel.org Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: OCTEON: Consolidate the edge and level irq_chip structures.David Daney
We can consolidate octeon_irq_chip_ciu_edge and octeon_irq_chip_ciu as they only differ in the .irq_ack element, and that is unused by the level handler. This gets rid of a bunch of duplicate definitions. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3931/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: OCTEON: Remove unneeded OCTEON_IRQ_* defines.David Daney
The follow-on patch to add irq_domain support will be the supported method for using these irq lines, so get these defines out of the way in preperation for that. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3930/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Octeon: Remove use of OCTEON_IRQ_RST.David Daney
This symbol will be removed, so don't use it as part of the definition of OCTEON_IRQ_LAST. Set OCTEON_IRQ_LAST to 127 so there is space for all the automatically allocated (via irq_domain) irqs. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3946/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Octeon: Add irq handlers for GPIO interrupts.David Daney
This is needed for follow-on on patches for Octeon to use the Device Tree to configure GPIO interrupts. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3932/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: OCTEON: Remove some unused files.David Daney
These FPA related files are not used anywhere in the kernel. Remove them. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63xx: Make board setup code register the spi platform deviceFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Patchwork: https://patchwork.linux-mips.org/patch/3317/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63xx: Add stub to register the SPI platform driverFlorian Fainelli
This patch adds the necessary stub to register the SPI platform driver. Since the registers are shuffled between the 4 BCM63xx CPUs supported by this SPI driver we also need to generate the internal register layout and export this layout for the driver to use it properly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Patchwork: https://patchwork.linux-mips.org/patch/3321/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63xx: Define internal registers offsets of the SPI controllerFlorian Fainelli
BCM6338, BCM6348, BCM6358 and BCM6368 basically use the same SPI controller though the internal registers are shuffled, which still allows a common driver to drive that IP block. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Patchwork: https://patchwork.linux-mips.org/patch/3318/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63xx: Remove SPI2 registerFlorian Fainelli
This register was introduced with the support of the BCM6368 CPU in the idea that its internal layout was different from the other CPUs SPI controller. The controller is actually the same as the one present on BCM6358 so we can remove this register and use the usual SPI register instead. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Patchwork: https://patchwork.linux-mips.org/patch/3316/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63xx: Define SPI register sizes.Florian Fainelli
There are two distinct sizes for the SPI register depending on the SoC generation (6338 & 6348 vs 6358 & 6368). Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Patchwork: https://patchwork.linux-mips.org/patch/3314/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63xx: Add BCM6368 SPI clock maskFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Patchwork: https://patchwork.linux-mips.org/patch/3319/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63xx: Define BCM6358 SPI base addressFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Patchwork: https://patchwork.linux-mips.org/patch/3315/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63xx: Add IRQ_SPI and CPU specific SPI IRQ valuesFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Patchwork: https://patchwork.linux-mips.org/patch/3320/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63XX: Be consistent in clock bits enable namingFlorian Fainelli
Remove the _CLK suffix from the BCM6368 clock bits definitions to be consistent with what is already present. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3312/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: handle db1200 cpld ints as they come inManuel Lauss
Remove the loop in the cascade handler and instead unconditionally handle just the first set interrupt coming from the CPLD. This gets rid of a lot of spurious interrupts being triggered for the SMSC91111 ethernet chip especially under high(er) IDE load: "eth0: spurious interrupt (mask = 0xb3)" Verified on DB1200 and DB1300. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3288/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: devboards: kill prom.cManuel Lauss
move contents to already existing platform.c file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3287/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: Alchemy: use 64MB RAM as minimum for devboardsManuel Lauss
YAMON on all devboards provides the "memsize" envvar; in the unlikely case that it can't be parsed just assume 64MB, which all boards have at least. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3286/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23Merge tag 'asoc-3.6' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Additional updates for 3.6 A few more fixes for 3.6, some of which are relatively important - they've all been in -next for at least some time. - DAPM fixes for the recent locking changes. - Fix for _PRE and _POST widgets (which have been broken for a few releases now). - A couple of minor driver updates.
2012-07-23pwm: fix used-uninitialized warning in pwm_get()Thierry Reding
Some versions of GCC don't seem no notice that the initialization of the index variable is tied to that of the chip variable and falsely report it as potentially being used uninitialized. However, to save anybody else from tripping over this, we now initialize the index variable unconditionally. Originally-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-23pwm: add lpc32xx PWM supportAlexandre Pereira da Silva
Add lpc32xx SOC PWM driver. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-23pwm_backlight: pass correct brightness to callbackAlexandre Courbot
pwm_backlight_update_status calls the notify() and notify_after() callbacks before and after applying the new PWM settings. However, if brightness levels are used, the brightness value will be changed from the index into the levels array to the PWM duty cycle length before being passed to notify_after(), which results in inconsistent behavior. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-07-23pwm: Use pr_* functions in pwm-samsung.c fileSachin Kamat
Replace printk with pr_* functions to avoid checkpatch warnings. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
generated by cgit (git 2.34.1) at 2025-09-19 04:16:13 +0000