summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-05Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes - fix and enable iceland/topaz support - handle WC on platforms that don't support it * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: disable uvd and vce clockgating on Fiji drm/amdgpu: remove exp hardware support from iceland drm/amdgpu: load MEC ucode manually on iceland drm/amdgpu: don't load MEC2 on topaz drm/amdgpu: drop topaz support from gmc8 module drm/amdgpu: pull topaz gmc bits into gmc_v7 drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above drm/amdgpu: iceland use CI based MC IP drm/amdgpu: move gmc7 support out of CIK dependency drm/amdgpu/gfx7: enable cp inst/reg error interrupts drm/amdgpu/gfx8: enable cp inst/reg error interrupts drm/amdgpu: mask out WC from BO on unsupported arches drm/radeon: mask out WC from BO on unsupported arches drm: add helper to check for wc memory support drm/amdgpu: no need to load MC firmware on fiji
2016-02-05Merge tag 'drm-amdkfd-fixes-2016-01-28' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes two static checker fixes. * tag 'drm-amdkfd-fixes-2016-01-28' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Remove unnecessary cast in kfree drm/amdgpu: fix non-ANSI declaration of amdgpu_amdkfd_gfx_*_get_functions()
2016-02-05Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Just regression fixes. - Fix build warning and error without PM configuration - Fix no display issue on Snow board reported by Michal Suchanek, http://www.spinics.net/lists/dri-devel/msg99473.html * 'exynos-drm-fixes' of git://git.kernel.org:/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: dp: Fix panel and bridge lookup logic drm: exynos: make PM functions as __maybe_unused drm/exynos: fix building without CONFIG_PM_SLEEP
2016-02-05Merge branch 'drm/adv7511' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into drm-fixes misc adv7511 edid reading fixes. * 'drm/adv7511' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: drm: adv7511: it's HPD, not HDP drm: adv7511: mark ADV7511_REG_EDID_READ_CTRL volatile drm: adv7511: really enable interrupts for EDID detection
2016-02-05Merge tag 'drm-intel-fixes-2016-02-04' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes misc i915 fixes. * tag 'drm-intel-fixes-2016-02-04' of git://anongit.freedesktop.org/drm-intel: drm/i915: refine qemu south bridge detection drm/i915: Remove select to deleted STOP_MACHINE from Kconfig drm/i915: Fix NULL plane->fb oops on SKL drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+ drm/i915/dp: fall back to 18 bpp when sink capability is unknown drm/i915: Make sure DC writes are coherent on flush.
2016-02-04block/sd: Return -EREMOTEIO when WRITE SAME and DISCARD are disabledMartin K. Petersen
When a storage device rejects a WRITE SAME command we will disable write same functionality for the device and return -EREMOTEIO to the block layer. -EREMOTEIO will in turn prevent DM from retrying the I/O and/or failing the path. Yiwen Jiang discovered a small race where WRITE SAME requests issued simultaneously would cause -EIO to be returned. This happened because any requests being prepared after WRITE SAME had been disabled for the device caused us to return BLKPREP_KILL. The latter caused the block layer to return -EIO upon completion. To overcome this we introduce BLKPREP_INVALID which indicates that this is an invalid request for the device. blk_peek_request() is modified to return -EREMOTEIO in that case. Reported-by: Yiwen Jiang <jiangyiwen@huawei.com> Suggested-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-04SCSI: Add Marvell Console to VPD blacklistMika Westerberg
I have a Marvell 88SE9230 SATA Controller that has some sort of integrated console SCSI device attached to one of the ports. ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 ata14.00: configured for UDMA/66 scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5 Sending it VPD INQUIRY command seem to always fail with following error: ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link This has been minor annoyance (only error printed on dmesg) until commit 09e2b0b14690 ("scsi: rescan VPD attributes") added call to scsi_attach_vpd() in scsi_rescan_device(). The commit causes the system to splat out following errors continuously without ever reaching the UI: ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 6 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 7 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) Without in-depth understanding of SCSI layer and the Marvell controller, I suspect this happens because when the link goes down (because of an error) we schedule scsi_rescan_device() which again fails to read VPD data... ad infinitum. Since VPD data cannot be read from the device anyway we prevent the SCSI layer from even trying by blacklisting the device. This gets away the error and the system starts up normally. [mkp: Widened the match to all revisions of this device] Cc: <stable@vger.kernel.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-04scsi_dh_rdac: always retry MODE SELECT on command lock violationHannes Reinecke
If MODE SELECT returns with sense '05/91/36' (command lock violation) it should always be retried without counting the number of retries. During an HBA upgrade or similar circumstances one might see a flood of MODE SELECT command from various HBAs, which will easily trigger the sense code and exceed the retry count. Cc: <stable@vger.kernel.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-05Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctlFilipe Manana
While doing some tests I ran into an hang on an extent buffer's rwlock that produced the following trace: [39389.800012] NMI watchdog: BUG: soft lockup - CPU#15 stuck for 22s! [fdm-stress:32166] [39389.800016] NMI watchdog: BUG: soft lockup - CPU#14 stuck for 22s! [fdm-stress:32165] [39389.800016] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800016] irq event stamp: 0 [39389.800016] hardirqs last enabled at (0): [< (null)>] (null) [39389.800016] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last disabled at (0): [< (null)>] (null) [39389.800016] CPU: 14 PID: 32165 Comm: fdm-stress Not tainted 4.4.0-rc6-btrfs-next-18+ #1 [39389.800016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800016] task: ffff880175b1ca40 ti: ffff8800a185c000 task.ti: ffff8800a185c000 [39389.800016] RIP: 0010:[<ffffffff810902af>] [<ffffffff810902af>] queued_spin_lock_slowpath+0x57/0x158 [39389.800016] RSP: 0018:ffff8800a185fb80 EFLAGS: 00000202 [39389.800016] RAX: 0000000000000101 RBX: ffff8801710c4e9c RCX: 0000000000000101 [39389.800016] RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000001 [39389.800016] RBP: ffff8800a185fb98 R08: 0000000000000001 R09: 0000000000000000 [39389.800016] R10: ffff8800a185fb68 R11: 6db6db6db6db6db7 R12: ffff8801710c4e98 [39389.800016] R13: ffff880175b1ca40 R14: ffff8800a185fc10 R15: ffff880175b1ca40 [39389.800016] FS: 00007f6d37fff700(0000) GS:ffff8802be9c0000(0000) knlGS:0000000000000000 [39389.800016] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800016] CR2: 00007f6d300019b8 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800016] Stack: [39389.800016] ffff8801710c4e98 ffff8801710c4e98 ffff880175b1ca40 ffff8800a185fbb0 [39389.800016] ffffffff81091e11 ffff8801710c4e98 ffff8800a185fbc8 ffffffff81091895 [39389.800016] ffff8801710c4e98 ffff8800a185fbe8 ffffffff81486c5c ffffffffa067288c [39389.800016] Call Trace: [39389.800016] [<ffffffff81091e11>] queued_read_lock_slowpath+0x46/0x60 [39389.800016] [<ffffffff81091895>] do_raw_read_lock+0x3e/0x41 [39389.800016] [<ffffffff81486c5c>] _raw_read_lock+0x3d/0x44 [39389.800016] [<ffffffffa067288c>] ? btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa067288c>] btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa0622ced>] ? btrfs_find_item+0xa7/0xd2 [btrfs] [39389.800016] [<ffffffffa069363f>] btrfs_ref_to_path+0xd6/0x174 [btrfs] [39389.800016] [<ffffffffa0693730>] inode_to_path+0x53/0xa2 [btrfs] [39389.800016] [<ffffffffa0693e2e>] paths_from_inode+0x117/0x2ec [btrfs] [39389.800016] [<ffffffffa0670cff>] btrfs_ioctl+0xd5b/0x2793 [btrfs] [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff81276727>] ? __this_cpu_preempt_check+0x13/0x15 [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800016] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800016] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800016] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800016] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800016] Code: b9 01 01 00 00 f7 c6 00 ff ff ff 75 32 83 fe 01 89 ca 89 f0 0f 45 d7 f0 0f b1 13 39 f0 74 04 89 c6 eb e2 ff ca 0f 84 fa 00 00 00 <8b> 03 84 c0 74 04 f3 90 eb f6 66 c7 03 01 00 e9 e6 00 00 00 e8 [39389.800012] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800012] irq event stamp: 0 [39389.800012] hardirqs last enabled at (0): [< (null)>] (null) [39389.800012] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last disabled at (0): [< (null)>] (null) [39389.800012] CPU: 15 PID: 32166 Comm: fdm-stress Tainted: G L 4.4.0-rc6-btrfs-next-18+ #1 [39389.800012] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800012] task: ffff880179294380 ti: ffff880034a60000 task.ti: ffff880034a60000 [39389.800012] RIP: 0010:[<ffffffff81091e8d>] [<ffffffff81091e8d>] queued_write_lock_slowpath+0x62/0x72 [39389.800012] RSP: 0018:ffff880034a639f0 EFLAGS: 00000206 [39389.800012] RAX: 0000000000000101 RBX: ffff8801710c4e98 RCX: 0000000000000000 [39389.800012] RDX: 00000000000000ff RSI: 0000000000000000 RDI: ffff8801710c4e9c [39389.800012] RBP: ffff880034a639f8 R08: 0000000000000001 R09: 0000000000000000 [39389.800012] R10: ffff880034a639b0 R11: 0000000000001000 R12: ffff8801710c4e98 [39389.800012] R13: 0000000000000001 R14: ffff880172cbc000 R15: ffff8801710c4e00 [39389.800012] FS: 00007f6d377fe700(0000) GS:ffff8802be9e0000(0000) knlGS:0000000000000000 [39389.800012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800012] CR2: 00007f6d3d3c1000 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800012] Stack: [39389.800012] ffff8801710c4e98 ffff880034a63a10 ffffffff81091963 ffff8801710c4e98 [39389.800012] ffff880034a63a30 ffffffff81486f1b ffffffffa0672cb3 ffff8801710c4e00 [39389.800012] ffff880034a63a78 ffffffffa0672cb3 ffff8801710c4e00 ffff880034a63a58 [39389.800012] Call Trace: [39389.800012] [<ffffffff81091963>] do_raw_write_lock+0x72/0x8c [39389.800012] [<ffffffff81486f1b>] _raw_write_lock+0x3a/0x41 [39389.800012] [<ffffffffa0672cb3>] ? btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa0672cb3>] btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa061aeba>] ? rcu_read_unlock+0x5b/0x5d [btrfs] [39389.800012] [<ffffffffa061ce13>] ? btrfs_root_node+0xda/0xe6 [btrfs] [39389.800012] [<ffffffffa061ce83>] btrfs_lock_root_node+0x22/0x42 [btrfs] [39389.800012] [<ffffffffa062046b>] btrfs_search_slot+0x1b8/0x758 [btrfs] [39389.800012] [<ffffffff810fc6b0>] ? time_hardirqs_on+0x15/0x28 [39389.800012] [<ffffffffa06365db>] btrfs_lookup_inode+0x31/0x95 [btrfs] [39389.800012] [<ffffffff8108d62f>] ? trace_hardirqs_on+0xd/0xf [39389.800012] [<ffffffff8148482b>] ? mutex_lock_nested+0x397/0x3bc [39389.800012] [<ffffffffa068821b>] __btrfs_update_delayed_inode+0x59/0x1c0 [btrfs] [39389.800012] [<ffffffffa068858e>] __btrfs_commit_inode_delayed_items+0x194/0x5aa [btrfs] [39389.800012] [<ffffffff81486ab7>] ? _raw_spin_unlock+0x31/0x44 [39389.800012] [<ffffffffa0688a48>] __btrfs_run_delayed_items+0xa4/0x15c [btrfs] [39389.800012] [<ffffffffa0688d62>] btrfs_run_delayed_items+0x11/0x13 [btrfs] [39389.800012] [<ffffffffa064048e>] btrfs_commit_transaction+0x234/0x96e [btrfs] [39389.800012] [<ffffffffa0618d10>] btrfs_sync_fs+0x145/0x1ad [btrfs] [39389.800012] [<ffffffffa0671176>] btrfs_ioctl+0x11d2/0x2793 [btrfs] [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800012] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800012] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800012] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800012] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800012] Code: f0 0f b1 13 85 c0 75 ef eb 2a f3 90 8a 03 84 c0 75 f8 f0 0f b0 13 84 c0 75 f0 ba ff 00 00 00 eb 0a f0 0f b1 13 ff c8 74 0b f3 90 <8b> 03 83 f8 01 75 f7 eb ed c6 43 04 00 5b 5d c3 0f 1f 44 00 00 This happens because in the code path executed by the inode_paths ioctl we end up nesting two calls to read lock a leaf's rwlock when after the first call to read_lock() and before the second call to read_lock(), another task (running the delayed items as part of a transaction commit) has already called write_lock() against the leaf's rwlock. This situation is illustrated by the following diagram: Task A Task B btrfs_ref_to_path() btrfs_commit_transaction() read_lock(&eb->lock); btrfs_run_delayed_items() __btrfs_commit_inode_delayed_items() __btrfs_update_delayed_inode() btrfs_lookup_inode() write_lock(&eb->lock); --> task waits for lock read_lock(&eb->lock); --> makes this task hang forever (and task B too of course) So fix this by avoiding doing the nested read lock, which is easily avoidable. This issue does not happen if task B calls write_lock() after task A does the second call to read_lock(), however there does not seem to exist anything in the documentation that mentions what is the expected behaviour for recursive locking of rwlocks (leaving the idea that doing so is not a good usage of rwlocks). Also, as a side effect necessary for this fix, make sure we do not needlessly read lock extent buffers when the input path has skip_locking set (used when called from send). Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana <fdmanana@suse.com>
2016-02-04xhci: harden xhci_find_next_ext_cap against device removalJoe Lawrence
xhci_find_next_ext_cap doesn't check for PCI hotplug removal and may use the PCI master abort bit pattern (~0) to calculate a new PCI address offset to read/write. The has lead to reproducable crashes when testing surprise removal during device initialization on a Stratus platform, at least after commit d5ddcdf4d672 ("xhci: rework xhci extended capability list parsing functions"). The crash is repeatable on a Stratus platform when injecting hardware faults to induce xHCI host controller hotplug during driver initialization. If a PCI read in xhci_find_next_ext_cap returns the master abort pattern, quirk_usb_handoff_xhci may start using a bogus ext_cap_offset to start searching more bogus PCI addresses. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Nothing particularly interesting here, but all important fixes nonetheless: - Add missing PAN toggling in the futex code - Fix missing #include that briefly caused issues in -next - Allow changing of vmalloc permissions with set_memory_* (used by bpf)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: asm: Explicitly include linux/personality.h in asm/page.h arm64: futex.h: Add missing PAN toggling arm64: allow vmalloc regions to be set with set_memory_*
2016-02-04ARM: multi_v7_defconfig: enable DW_WATCHDOGDinh Nguyen
The watchdog timer on the SoCFPGA platform is the Synopsys Designware watchdog. Enable CONFIG_DW_WATCHDOG for the driver to get built. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-04ARM: nomadik: fix up SD/MMC DT settingsLinus Walleij
The DTSI file for the Nomadik does not properly specify how the PL180 levelshifter is connected: the Nomadik actually needs all the five st,sig-dir-* flags set to properly control all lines out. Further this board supports full power cycling of the card, and since this variant has no hardware clock gating, it needs a ridiculously low frequency setting to keep up with the ever overflowing FIFO. The pin configuration set-up is a bit of a mystery, because of course these pins are a mix of inputs and outputs. However the reference implementation sets all pins to "output" with unspecified initial value, so let's do that here as well. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-04Merge tag 'fixes-for-v4.5-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.5-rc2 DWC3 got a fix for OTG Certification, DWC2 has two fixes for regressions on RasPI, MUSB has a NULL pointer dereference fix for ux500 platforms and two PHYs (MSM and MXS) got some minor fixes. While at that, I'm also adding a fix to my email address which has changed recently.
2016-02-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md Pull MD fix from Shaohua Li: "As you know, Neil steps down from MD. I'm looking after it. Here are some patches queued. A build fix from Gayatri and several trival patches from me" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md-cluster: delete useless code md-cluster: fix missing memory free raid6/algos.c : bug fix : Add the missing definitions to the pq.h file MD: add myself as MD maintainer MD: rename some functions
2016-02-04Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: - One minor fix to the ib core - Four minor fixes to the Mellanox drivers - Remove three deprecated drivers from staging/rdma now that all of Greg's queued changes to them are merged * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: staging/rdma: remove deprecated ipath driver staging/rdma: remove deprecated ehca driver staging/rdma: remove deprecated amso1100 driver IB/core: Set correct payload length for RoCEv2 over IPv6 IB/mlx5: Use MLX5_GET to correctly get end of padding mode IB/mlx5: Fix use of null pointer PD IB/mlx5: Fix reqlen validation in mlx5_ib_alloc_ucontext IB/mlx5: Add CREATE_CQ and CREATE_QP to uverbs_ex_cmd_mask
2016-02-04[media] saa7134-alsa: Only frees registered sound cardsMauro Carvalho Chehab
That prevents this bug: [ 2382.269496] BUG: unable to handle kernel NULL pointer dereference at 0000000000000540 [ 2382.270013] IP: [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] PGD 0 [ 2382.270013] Oops: 0002 [#1] SMP [ 2382.270013] Modules linked in: saa7134_alsa(-) tda1004x saa7134_dvb videobuf2_dvb dvb_core tda827x tda8290 tuner saa7134 tveeprom videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc tun bridge stp llc ebtables ip6table_filter ip6_tables nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack it87 hwmon_vid snd_hda_codec_idt snd_hda_codec_generic iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq pcspkr i2c_i801 snd_seq_device snd_pcm snd_timer lpc_ich snd mfd_core soundcore binfmt_misc i915 video i2c_algo_bit drm_kms_helper drm r8169 ata_generic serio_raw pata_acpi mii i2c_core [last unloaded: videobuf2_memops] [ 2382.270013] CPU: 0 PID: 4899 Comm: rmmod Not tainted 4.5.0-rc1+ #4 [ 2382.270013] Hardware name: PCCHIPS P17G/P17G, BIOS 080012 05/14/2008 [ 2382.270013] task: ffff880039c38000 ti: ffff88003c764000 task.ti: ffff88003c764000 [ 2382.270013] RIP: 0010:[<ffffffffa01fe616>] [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP: 0018:ffff88003c767ea0 EFLAGS: 00010286 [ 2382.270013] RAX: ffff88003c767eb8 RBX: 0000000000000000 RCX: 0000000000006260 [ 2382.270013] RDX: ffffffffa020a060 RSI: ffffffffa0206de1 RDI: ffff88003c767eb0 [ 2382.270013] RBP: ffff88003c767ed8 R08: 0000000000019960 R09: ffffffff811a5412 [ 2382.270013] R10: ffffea0000d7c200 R11: 0000000000000000 R12: ffff88003c767ea8 [ 2382.270013] R13: 00007ffe760617f7 R14: 0000000000000000 R15: 0000557625d7f1e0 [ 2382.270013] FS: 00007f80bb1c0700(0000) GS:ffff88003f400000(0000) knlGS:0000000000000000 [ 2382.270013] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2382.270013] CR2: 0000000000000540 CR3: 000000003c00f000 CR4: 00000000000006f0 [ 2382.270013] Stack: [ 2382.270013] 000000003c767ed8 ffffffff00000000 ffff880000000000 ffff88003c767eb8 [ 2382.270013] ffff88003c767eb8 ffffffffa049a890 00007ffe76060060 ffff88003c767ef0 [ 2382.270013] ffffffffa049889d ffffffffa049a500 ffff88003c767f48 ffffffff8111079c [ 2382.270013] Call Trace: [ 2382.270013] [<ffffffffa049889d>] saa7134_alsa_exit+0x1d/0x780 [saa7134_alsa] [ 2382.270013] [<ffffffff8111079c>] SyS_delete_module+0x19c/0x1f0 [ 2382.270013] [<ffffffff8170fc2e>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 2382.270013] Code: 20 a0 48 c7 c6 e1 6d 20 a0 48 89 e5 41 54 53 4c 8d 65 d0 48 89 fb 48 83 ec 28 c7 45 d0 00 00 00 00 49 8d 7c 24 08 e8 7a 55 ed e0 <4c> 89 a3 40 05 00 00 48 89 df e8 eb fd ff ff 85 c0 75 1a 48 8d [ 2382.270013] RIP [<ffffffffa01fe616>] snd_card_free+0x36/0x70 [snd] [ 2382.270013] RSP <ffff88003c767ea0> [ 2382.270013] CR2: 0000000000000540 Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-04libceph: MOSDOpReply v7 encodingIlya Dryomov
Empty request_redirect_t (struct ceph_request_redirect in the kernel client) is now encoded with a bool. NEW_OSDOPREPLY_ENCODING feature bit overlaps with already supported CRUSH_TUNABLES5. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-04libceph: advertise support for TUNABLES5Ilya Dryomov
Add TUNABLES5 feature (chooseleaf_stable tunable) to a set of features supported by default. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-04crush: decode and initialize chooseleaf_stableIlya Dryomov
Also add missing \n while at it. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-04crush: add chooseleaf_stable tunableIlya Dryomov
Add a tunable to fix the bug that chooseleaf may cause unnecessary pg migrations when some device fails. Reflects ceph.git commit fdb3f664448e80d984470f32f04e2e6f03ab52ec. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-04crush: ensure take bucket value is validIlya Dryomov
Ensure that the take argument is a valid bucket ID before indexing the buckets array. Reflects ceph.git commit 93ec538e8a667699876b72459b8ad78966d89c61. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-04crush: ensure bucket id is valid before indexing buckets arrayIlya Dryomov
We were indexing the buckets array without verifying the index was within the [0,max_buckets) range. This could happen because a multistep rule does not have enough buckets and has CRUSH_ITEM_NONE for an intermediate result, which would feed in CRUSH_ITEM_NONE and make us crash. Reflects ceph.git commit 976a24a326da8931e689ee22fce35feab5b67b76. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2016-02-04ceph: fix snap context leak in error pathYan, Zheng
Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-02-04ceph: checking for IS_ERR instead of NULLDan Carpenter
ceph_osdc_alloc_request() returns NULL on error, it never returns error pointers. Fixes: 5be0389dac66 ('ceph: re-send AIO write request when getting -EOLDSNAP error') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-02-04lightnvm: allow to force mm initializationMatias Bjørling
System block allows the device to initialize with its configured media manager. The system blocks is written to disk, and read again when media manager is determined. For this to work, the backend must store the data. Device drivers, such as null_blk, does not have any backend storage. This patch allows the media manager to be initialized without a storage backend. It also fix incorrect configuration of capabilities in null_blk, as it does not support get/set bad block interface. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-04lightnvm: check overflow and correct mlc pairsMatias Bjørling
The specification currently limits the number of MLC pairs to 886. Make sure that a device is unable to be instantiate if more is configured. Also, previously the patch had the wrong math for copying MLC pairs, as it only copied half of the actual entries. Fixes: ca5927e7ab53 "lightnvm: introduce mlc lower page table mappings" Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-04lightnvm: fix request intersection locking in rrpcJavier González
This patch fixes an error on the calculation of intersecting logical addresses; it contemplates the case where a new request including several addresses intersects with a single locked address. This case is typical when multiple pages are sent in a new request, while GC - which at the moment sends one address at the time - is running. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-04lightnvm: warn if irqs are disabled in lock laddrJavier González
Add a warning if irqs are disabled when locking a new address in rrpc. The typical path to a new request does not disable irqs, but this is not guaranteed in the future. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-04lightnvm: put bio before returnWenwei Tao
The bio is not returned if the data page cannot be allocated. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-04ALSA: timer: Fix leftover link at closingTakashi Iwai
In ALSA timer core, the active timer instance is managed in active_list linked list. Each element is added / removed dynamically at timer start, stop and in timer interrupt. The problem is that snd_timer_interrupt() has a thinko and leaves the element in active_list when it's the last opened element. This eventually leads to list corruption or use-after-free error. This hasn't been revealed because we used to delete the list forcibly in snd_timer_stop() in the past. However, the recent fix avoids the double-stop behavior (in commit [f784beb75ce8: ALSA: timer: Fix link corruption due to double start or stop]), and this leak hits reality. This patch fixes the link management in snd_timer_interrupt(). Now it simply unlinks no matter which stream is. BugLink: http://lkml.kernel.org/r/CACT4Y+Yy2aukHP-EDp8-ziNqNNmb-NTf=jDWXMP7jB8HDa2vng@mail.gmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-04irqchip/gicv3-its: Fix memory leak in its_free_tables()Shanker Donthineni
The current ITS driver has a memory leak in its_free_tables(). It happens on tear down path of the driver when its_probe() call fails. its_free_tables() should free the exact number of pages that have been allocated, not just a single page as current code does. This patch records the memory size for each ITS_BASERn at the time of page allocation and uses the same size information when freeing pages to fix the issue. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Vikram Sethi <vikrams@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1454379584-21772-1-git-send-email-shankerd@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-04IB/sysfs: remove unused va_list argsColin Ian King
_show_port_gid_attr performs a va_end on some unused va_list args. Clean this up by removing the args completely. Fixes: 470be516a226e8 ("IB/core: Add gid attributes to sysfs") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-04IB/IPoIB: Do not set skb truesize since using one linearskbCarol L Soto
We are seeing this warning: at net/core/skbuff.c:4174 and before commit a44878d10063 ("IB/ipoib: Use one linear skb in RX flow") skb truesize was not being set when ipoib was using just one skb. Removing this line avoids the warning when running tcp tests like iperf. Fixes: a44878d10063 ("IB/ipoib: Use one linear skb in RX flow") Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-04ASoC: Intel: Skylake: Remove autosuspend delayVinod Koul
The driver used autosuspend delay to delay going to D3. But per HW recommendation we should go to D3 soon, so remove the delay from driver Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix stereo DMIC recordJeeja KP
DMIC BE can have 2 or 4 channels supported. The DMIC fixup needs to take this into account. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Add missing PRE/POST_PMU handlers for vmixerJeeja KP
Some modules may be directly connected to a pipeline without a mixer module. For these modules, we require PRE_PMU and POST_PMU handler which will do bind between the pipelines, so add these missing handlers. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix bind of source with multiple sinksJeeja KP
skl_tplg_bind_sinks() takes only the first sink widget. This breaks in case we have multiple sinks for a module. So pass source widget to skl_tplg_bind_sinks() and bind for all sinks by calling this recursively Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix not to stop sink pipe in pga pmd eventJeeja KP
We should not stop the sink pipe in it's pmd handler for a mixin module as this module may still be connected to other pipes. This will be stopped and freed by current implementation on last connected pipe unbind. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix the module state check conditionJeeja KP
For binding modules we should check if source or destination module is in UNINT state. We canot bind even if one of them is in this state. So update the check from logical AND to logical OR and do not bind modules for this case Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix return of skl_get_queue_indexJeeja KP
In unbind modules, the skl_get_queue_index() can return error if the pin is dynamic and module is not bound yet. So instead of returning error this check should return success as modules is not yet bound. This will let the module be bound when connected pipes are enabled and will bind this as well. So change the return value to 0 Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix pipe memory allocation leakDharageswari.R
We check and allocate pipeline resources in one shot. That causes leaks if module creation fails later as that is not freed. So split the resource allocation into two, first check if resources are available and then add the resources upon successful creation. So two new functions are added for checking and current functions are re-purposed to only add the resources for memory and MCPS. Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix mcps freeup after module unbind failureGuneshwor Singh
While cleaning resources on module pmd event, we check for return of skl_unbind_modules(). On failure this causes leak as all modules attached do not have resources freed. So ignore return value of module unbind and continue freeing resources. This makes dapm state and resources correct. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix delay wrap conditionGuneshwor Singh
When delay reported by HW is equal to buffersize, it means the value is wrapped so we should report as 0. So add the condition to check this while reporting the delay from LPIB. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix the memory overwrite of tlv bufferVinod Koul
TLV buffer can be smaller than the module data, so update the size of data to be copied before doing the copy. Also TLV header consists of two unsigned ints, this is also taken into account here and size modified to reflect this Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04[media] vb2-core: call threadio->fnc() if !VB2_BUF_STATE_ERRORMauro Carvalho Chehab
changeset 70433a152f0 ("media: videobuf2: Refactor vb2_fileio_data and vb2_thread") broke videobuf2-dvb. The root cause is that, instead of calling threadio->fnc() for all types of events except for VB2_BUF_STATE_ERROR, it was calling it only for VB2_BUF_STATE_DONE. With that, the DVB thread were never called. Cc: stable@vger.kernel.org # Kernel >= 4.3 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-04[media] vb2: fix nasty vb2_thread regressionHans Verkuil
The vb2_thread implementation was made generic and was moved from videobuf2-v4l2.c to videobuf2-core.c in commit af3bac1a. Unfortunately that clearly was never tested since it broke read() causing NULL address references. The root cause was confused handling of vb2_buffer vs v4l2_buffer (the pb pointer in various core functions). The v4l2_buffer no longer exists after moving the code into the core and it is no longer needed. However, the vb2_thread code passed a pointer to a vb2_buffer to the core functions were a v4l2_buffer pointer was expected and vb2_thread expected that the vb2_buffer fields would be filled in correctly. This is obviously wrong since v4l2_buffer != vb2_buffer. Note that the pb pointer is a void pointer, so no type-checking took place. This patch fixes this problem: 1) allow pb to be NULL for vb2_core_(d)qbuf. The vb2_thread code will use a NULL pointer here since they don't care about v4l2_buffer anyway. 2) let vb2_core_dqbuf pass back the index of the received buffer. This is all vb2_thread needs: this index is the index into the q->bufs array and vb2_thread just gets the vb2_buffer from there. 3) the fileio->b pointer (that originally contained a v4l2_buffer) is removed altogether since it is no longer needed. Tested with vivid and the cobalt driver. Cc: stable@vger.kernel.org # Kernel >= 4.3 Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-04[media] tda1004x: only update the frontend properties if lockedMauro Carvalho Chehab
The tda1004x was updating the properties cache before locking. If the device is not locked, the data at the registers are just random values with no real meaning. This caused the driver to fail with libdvbv5, as such library calls GET_PROPERTY from time to time, in order to return the DVB stats. Tested with a saa7134 card 78: ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862 Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-04ASoC: dapm: Don't prefix autodisable widgets twiceLars-Peter Clausen
When a DAPM context has a prefix the autodisable widgets get prefixed twice, once for the control and once for the widget. To avoid this use the un-prefixed control name to construct the autodisable widget name. This change is purely cosmetic. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04Merge tag 'perf-urgent-for-mingo-2' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - Fix 'perf stat' interval output values (Jiri Olsa) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 17:00:37 +0000