summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-14dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domainDmitry Baryshkov
On sm8250 dispcc requires MMCX power domain to be powered up before clock controller's registers become available. For now sm8250 was using external regulator driven by the power domain to describe this relationship. Switch into specifying power-domain and required opp-state directly. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210829154757.784699-2-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-14clk: qcom: gcc-sc7280: Drop unused arrayStephen Boyd
After commit 3165d1e3c737 ("clk: qcom: gcc: Remove CPUSS clocks control for SC7280") this array is unused. Remove it. Reported-by: kernel test robot <lkp@intel.com> Cc: Taniya Das <tdas@codeaurora.org> Fixes: 3165d1e3c737 ("clk: qcom: gcc: Remove CPUSS clocks control for SC7280") Link: https://lore.kernel.org/r/20211014191259.1689641-1-sboyd@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13Merge tag 'clk-imx-5.16' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux into clk-imx Pull i.MX clk driver changes from Abel Vesa: - Remove unused helpers from i.MX specific clock header - Rework all clk based helpers to use clk_hw based ones - Rework gate/mux/divider wrappers - Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers - Add i.MX8ULP clock driver and related bindings - Update i.MX pllv4 and composite clocks to support i.MX8ULP - Disable i.MX7ULP composite clock during initialization - Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite - Disable the pfd when set pfdv2 clock rate - Add support for i.MX8ULP in pfdv2 - Add the pcc reset controller support on i.MX8ULP - Fix the build break when clk-imx8ulp is built as module - Move csi_sel mux to correct base register in i.MX6UL clock drivr - Fix csi clk gate register in i.MX6UL clock driver - Fix build bug making CLK_IMX8ULP select MXC_CLK * tag 'clk-imx-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux: (21 commits) clk: imx: Make CLK_IMX8ULP select MXC_CLK clk: imx: imx6ul: Fix csi clk gate register clk: imx: imx6ul: Move csi_sel mux to correct base register clk: imx: Fix the build break when clk-imx8ulp build as module clk: imx: Add the pcc reset controller support on imx8ulp clk: imx: Add clock driver for imx8ulp clk: imx: Update the pfdv2 for 8ulp specific support clk: imx: disable the pfd when set pfdv2 clock rate clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulp clk: imx: disable i.mx7ulp composite clock during initialization clk: imx: Update the compsite driver to support imx8ulp clk: imx: Update the pllv4 to support imx8ulp dt-bindings: clock: Add imx8ulp clock support clk: imx: Rework imx_clk_hw_pll14xx wrapper clk: imx: Rework all imx_clk_hw_composite wrappers clk: imx: Rework all clk_hw_register_divider wrappers clk: imx: Rework all clk_hw_register_mux wrappers clk: imx: Rework all clk_hw_register_gate2 wrappers clk: imx: Rework all clk_hw_register_gate wrappers clk: imx: Make mux/mux2 clk based helpers use clk_hw based ones ...
2021-10-13clk: qcom: camcc: Add camera clock controller driver for SC7280Taniya Das
Add support for the camera clock controller found on SC7280 based devices. This would allow camera drivers to probe and control their clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1633567425-11953-2-git-send-email-tdas@codeaurora.org [sboyd@kernel.org: Make some VCOs unsigned long] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13dt-bindings: clock: Add YAML schemas for CAMCC clocks on SC7280Taniya Das
The camera clock controller clock provider have a bunch of generic properties that are needed in a device tree. Add the CAMCC clock IDs for camera client to request for the clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1633567425-11953-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: Add lpass clock controller driver for SC7280Taniya Das
Add support for the lpass clock controller found on SC7280 based devices. This would allow lpass peripheral loader drivers to control the clocks to bring the subsystem out of reset. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1633484416-27852-3-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13dt-bindings: clock: Add YAML schemas for LPASS clocks on SC7280Taniya Das
The LPASS(Low Power Audio Subsystem) clock provider have a bunch of generic properties that are needed in a device tree. Add the LPASS clock IDs for LPASS PIL client to request for the clocks. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1633484416-27852-2-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: Kconfig: Sort the symbol for SC_LPASS_CORECC_7180Taniya Das
Fix the order of the Kconfig symbol for SC_LPASS_CORECC_7180. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1633484416-27852-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: mmcc-sdm660: Add hw_ctrl flag to venus_core0_gdscAngeloGioacchino Del Regno
As shown downstream[1], this GDSC supports HW trigger mode and we're supposed to enable it in order to ensure correct operation. [1]: https://github.com/sonyxperiadev/kernel/blob/aosp/LA.UM.6.4.r1/arch/arm/boot/dts/qcom/sdm630.dtsi#L2181 Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211008102041.268253-2-angelogioacchino.delregno@collabora.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: mmcc-sdm660: Add necessary CXCs to venus_gdscAngeloGioacchino Del Regno
As also shown on downstream dts[1], for a correct operation of the Venus block, we have to retain MEM/PERIPH when halting the video_core, video_axi and video_subcore0 branches: add these CXCs to the main Venus GDSC. [1]: https://github.com/sonyxperiadev/kernel/blob/aosp/LA.UM.6.4.r1/arch/arm/boot/dts/qcom/sdm660-vidc.dtsi#L80 Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211008102041.268253-1-angelogioacchino.delregno@collabora.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: gcc-msm8994: Use ARRAY_SIZE() for num_parentsKonrad Dybcio
Don't rely on the programmer to enter the name of array elements, since the computer can compute it with much less chance of making a mistake. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210923162645.23257-9-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: gcc-msm8994: Add proper msm8992 supportKonrad Dybcio
MSM8992 is a cut-down version of MSM8994, featuring largely the same hardware. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210923162645.23257-8-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: gcc-msm8994: Add modem resetKonrad Dybcio
This will be required to support the modem. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210923162645.23257-7-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: gcc-msm8994: Remove the inexistent GDSC_PCIEKonrad Dybcio
This GDSC is not present on msm8994. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210923162645.23257-6-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: gcc-msm8994: Add missing clocksKonrad Dybcio
This should be the last "add missing clocks" commit, as to my knowledge there are no more clocks registered within gcc. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210923162645.23257-5-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: gcc-msm8994: Add missing NoC clocksKonrad Dybcio
Add necessary NoC clocks to provide frequency sources for relevant branch clocks. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210923162645.23257-4-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: gcc-msm8994: Fix up SPI QUP clocksKonrad Dybcio
Fix up SPI QUP freq tables to account for the fact that not every QUP can run at the same set of frequencies. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210923162645.23257-3-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: gcc-msm8994: Modernize the driverKonrad Dybcio
Switch to the newer-style parent_data and remove the hardcoded xo clock. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210923162645.23257-2-konrad.dybcio@somainline.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13dt-bindings: clk: qcom: Add bindings for MSM8994 GCC driverKonrad Dybcio
Add documentation for the MSM8994 GCC driver. While at it, retire its compatible from the old, everyone-get-in-here file. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210923162645.23257-1-konrad.dybcio@somainline.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: smd-rpm: Add QCM2290 RPM clock supportShawn Guo
Add support for RPM-managed clocks on the QCM2290 platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210917030434.19859-4-shawn.guo@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13dt-bindings: clk: qcom,rpmcc: Document QCM2290 compatibleShawn Guo
Add compatible for the RPM Clock Controller on the QCM2290 SoC. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210917030434.19859-3-shawn.guo@linaro.org Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: smd-rpm: Add .recalc_rate hook for clk_smd_rpm_branch_opsShawn Guo
As there is a `rate` field in clk_smd_rpm, clk_smd_rpm_recalc_rate() can be used by branch clocks to report rate as well, rather than assuming the rate is always same as parent clock. This assumption doesn't hold on platforms like QCM2290, where xo_board is 38.4MHz while bi_tcxo is 19.2MHz. To get this work, XO buffered clocks need the following updates. - Assign a correct rate rather than the fake one which is being used to generate binary value for clk_smd_rpm_req interface. - Explicitly handle the clk_smd_rpm_req interface value for XO buffered clocks (.rpm_res_type being QCOM_SMD_RPM_CLK_BUF_A). Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210917030434.19859-2-shawn.guo@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> [sboyd@kernel.org: Do cpu_to_le32() again to keep sparse happy] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13clk: qcom: Add Global Clock Controller driver for QCM2290Shawn Guo
Add Global Clock Controller (GCC) driver for QCM2290. This is a porting of gcc-scuba driver from CAF msm-4.19, with GDSC support added on top. Because the alpha_pll on the platform has a different register layout (offsets), its own clk_alpha_pll_regs_offset[] is used in the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210919023308.24498-3-shawn.guo@linaro.org Acked-by: Rob Herring <robh@kernel.org> [sboyd@kernel.org: Drop duplicate includes, clk.h include, module alias] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-13dt-bindings: clk: qcom: Add QCM2290 Global Clock Controller bindingsShawn Guo
It adds device tree bindings for QCM2290 Global Clock Controller. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20210919023308.24498-2-shawn.guo@linaro.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-09dt-bindings: clock: Add bindings definitions for Exynos850 CMUSam Protsenko
Clock controller driver is designed to have separate instances for each particular CMU. So clock IDs in this bindings header also start from 1 for each CMU. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211008154352.19519-4-semen.protsenko@linaro.org Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-10-09clk: samsung: clk-pll: Implement pll0831x PLL typeSam Protsenko
pll0831x PLL is used in Exynos850 SoC for top-level fractional PLLs. The code was derived from very similar pll36xx type, with next differences: 1. Lock time for pll0831x is 500*P_DIV, when for pll36xx it's 3000*P_DIV 2. It's not suggested in Exynos850 TRM that S_DIV change doesn't require performing PLL lock procedure (which is done in pll36xx implementation) 3. The offset from PMS-values register to K-value register is 0x8 for pll0831x, when for pll36xx it's 0x4 When defining pll0831x type, CON3 register offset should be provided as a "con" parameter of PLL() macro, like this: PLL(pll_0831x, 0, "fout_mmc_pll", "oscclk", PLL_LOCKTIME_PLL_MMC, PLL_CON3_PLL_MMC, pll0831x_26mhz_tbl), To define PLL rates table, one can use PLL_36XX_RATE() macro, e.g.: PLL_36XX_RATE(26 * MHZ, 799999877, 31, 1, 0, -15124) as it's completely appropriate for pl0831x type and there is no sense in duplicating that. If bit #1 (MANUAL_PLL_CTRL) is not set in CON1 register, it won't be possible to set new rate, with next error showing in kernel log: Could not lock PLL fout_mmc_pll That can happen for example if bootloader clears that bit beforehand. PLL driver doesn't account for that, so if MANUAL_PLL_CTRL bit was cleared, it's assumed it was done for a reason and it shouldn't be possible to change that PLL's rate at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211008154352.19519-3-semen.protsenko@linaro.org Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-10-09clk: samsung: clk-pll: Implement pll0822x PLL typeSam Protsenko
pll0822x PLL is used in Exynos850 SoC for top-level integer PLLs. The code was derived from very similar pll35xx type, with next differences: 1. Lock time for pll0822x is 150*P_DIV, when for pll35xx it's 270*P_DIV 2. It's not suggested in Exynos850 TRM that S_DIV change doesn't require performing PLL lock procedure (which is done in pll35xx implementation) When defining pll0822x type, CON3 register offset should be provided as a "con" parameter of PLL() macro, like this: PLL(pll_0822x, 0, "fout_shared0_pll", "oscclk", PLL_LOCKTIME_PLL_SHARED0, PLL_CON3_PLL_SHARED0, exynos850_shared0_pll_rates), To define PLL rates table, one can use PLL_35XX_RATE() macro, e.g.: PLL_35XX_RATE(26 * MHZ, 1600 * MHZ, 800, 13, 0) as it's completely appropriate for pl0822x type and there is no sense in duplicating that. If bit #1 (MANUAL_PLL_CTRL) is not set in CON1 register, it won't be possible to set new rate, with next error showing in kernel log: Could not lock PLL fout_shared1_pll That can happen for example if bootloader clears that bit beforehand. PLL driver doesn't account for that, so if MANUAL_PLL_CTRL bit was cleared, it's assumed it was done for a reason and it shouldn't be possible to change that PLL's rate at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20211008154352.19519-2-semen.protsenko@linaro.org Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2021-10-08clk: renesas: r9a07g044: Add SDHI clock and reset entriesBiju Das
Add SDHI{0,1} mux, clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211007111434.8665-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-10-08clk: renesas: rzg2l: Add SDHI clk mux supportBiju Das
Add SDHI clk mux support to select SDHI clock from different clock sources. As per HW manual, direct clock switching from 533MHz to 400MHz and vice versa is not recommended. So added support for handling this in mux. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211007111434.8665-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-10-08clk: renesas: r8a779a0: Add RPC supportWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211006085836.42155-3-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-10-08clk: renesas: cpg-lib: Move RPC clock registration to the libraryWolfram Sang
We want to reuse this code for V3U soon. Because its RPCCKCR register is at a different offset, the moved functions do not use the base register as an argument anymore but the RPCCKCR register itself. Verified that an Eagle board with R-Car V3M still works. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211006085836.42155-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-10-08clk: renesas: r9a07g044: Add clock and reset entries for SPI Multi I/O Bus ↵Lad Prabhakar
Controller Add clock and reset entries for SPI Multi I/O Bus Controller. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20210928130132.15022-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-10-07clk: at91: check pmc node status before registering syscore opsClément Léger
Currently, at91 pmc driver always register the syscore_ops whatever the status of the pmc node that has been found. When set as secure and disabled, the pmc should not be accessed or this will generate abort exceptions. To avoid this, add a check on node availability before registering the syscore operations. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20210913082633.110168-1-clement.leger@bootlin.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Fixes: b3b02eac33ed ("clk: at91: Add sama5d2 suspend/resume") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-07Merge tag 'renesas-clk-for-v5.16-tag1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U - Add Ethernet clocks on Renesas RZ/G2L * tag 'renesas-clk-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r8a779a0: Add Z0 and Z1 clock support clk: renesas: r9a07g044: Add GbEthernet clock/reset clk: renesas: rzg2l: Add support to handle coupled clocks clk: renesas: r9a07g044: Add ethernet clock sources clk: renesas: rzg2l: Add support to handle MUX clocks clk: renesas: r8a779a0: Add TPU clock clk: renesas: rzg2l: Fix clk status function clk: renesas: r9a07g044: Mark IA55_CLK and DMAC_ACLK critical
2021-10-07clk: qcom: gcc: Remove CPUSS clocks control for SC7280Taniya Das
The CPUSS clocks are kept always ON and at a fixed frequency of 100MHZ from the bootloader and no longer required to be controlled from HLOS. Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280") Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1633579571-25475-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-07clk: qcom: Remove redundant .ownerKai Song
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Kai Song <songkai01@inspur.com> Link: https://lore.kernel.org/r/20211006043627.5125-1-songkai01@inspur.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-10-06clk: imx: Make CLK_IMX8ULP select MXC_CLKFabio Estevam
Building CLK_IMX8ULP without selecting MXC_CLK causes the following build errors: ld: drivers/clk/imx/clk-imx8ulp.o: in function `imx8ulp_clk_cgc2_init': clk-imx8ulp.c:(.text+0xd0): undefined reference to `imx_ccm_lock' ld: clk-imx8ulp.c:(.text+0x14f): undefined reference to `imx_clk_hw_pllv4' ld: clk-imx8ulp.c:(.text+0x15a): undefined reference to `imx_ccm_lock' Avoid this problem by making CLK_IMX8ULP select MXC_CLK. Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20211006190008.1935051-1-festevam@gmail.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-10-01clk: imx: imx6ul: Fix csi clk gate registerStefan Riedmueller
According to the imx6ul Reference Manual the csi clk gate register is CCM_CCGR3 (offset 0x74) bit 0/1. For the imx6ull on the other hand the Reference Manual lists register CCM_CCGR2 (offset 0x70) bit 2/3 as the csi clk gate which is the current setting. Tests have shown though that the correct csi clk gate register for the imx6ull is actually CCM_CCGR3 bit 0/1 as well. Thus set the correct register for both platforms. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Tested-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210927072857.3940880-2-s.riedmueller@phytec.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-10-01clk: imx: imx6ul: Move csi_sel mux to correct base registerStefan Riedmueller
The csi_sel mux register is located in the CCM register base and not the CCM_ANALOG register base. So move it to the correct position in code. Otherwise changing the parent of the csi clock can lead to a complete system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely modified. Also remove the SET_RATE_PARENT flag since one possible supply for the csi_sel mux is the system PLL which we don't want to modify. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210927072857.3940880-1-s.riedmueller@phytec.de Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-10-01clk: imx: Fix the build break when clk-imx8ulp build as moduleJacky Bai
Export the necessary symbols to fix the build break when clk-imx8ulp build as module Fixes: c43a801a5789 ("clk: imx: Add clock driver for imx8ulp") Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210917061629.3798360-1-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-30clk: imx: Add the pcc reset controller support on imx8ulpJacky Bai
On i.MX8ULP, for some of the PCCs, it has a peripheral SW RST bit resides in the same registers as the clock controller. So add this SW RST controller support alongs with the pcc clock initialization. the reset and clock shared the same register, to avoid accessing the same register by reset control and clock control concurrently, locking is necessary, so reuse the imx_ccm_lock spinlock to simplify the code. Suggested-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-10-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-30clk: imx: Add clock driver for imx8ulpJacky Bai
Add clock driver for i.MX8ULP. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-9-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-30clk: imx: Update the pfdv2 for 8ulp specific supportJacky Bai
On i.MX8ULP, the 'CLK_SET_RATE_PARENT' flag should NOT be set and according to the laest RM, the PFD divider value range seems will be changed in the future, so update the pfdv2 to include the specific support for i.MX8ULP. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-8-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-30clk: imx: disable the pfd when set pfdv2 clock rateJacky Bai
It is possible that a PFD is enabled in HW but not in SW. That means the enable count & prepare count of the PFD clock is '0', so the 'CLK_SET_RATE' flag can do nothing when the rate is changed while the PFD is hw enabled. In order to safely change the pfd rate, we can disable the PFD directly if it is hw enabled but not used by SW end user. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-7-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-30clk: imx: Add 'CLK_SET_RATE_NO_REPARENT' for composite-7ulpJacky Bai
For the imx_composite-7ulp clock type, The clock parent should be changed explicitly by end user of this clock, if the the 'CLK_SET_RATE_NO_REPARENT' flag is not set, when user want to set a clock frequency that can NOT get from HW accurately, then the clock's parent will be switch to another clock parent sometimes. This is NOT what we expected and introduced some additional debug effort, so add the 'CLK_SET_RATE_NO_REPARENT' to avoid such unexpected result. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-6-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-30clk: imx: disable i.mx7ulp composite clock during initializationAnson Huang
i.MX7ULP peripheral clock ONLY allow parent/rate to be changed with clock gated, however, during clock tree initialization, the peripheral clock could be enabled by bootloader, but the prepare count in clock tree is still zero, so clock core driver will allow parent/rate changed even with CLK_SET_RATE_GATE/CLK_SET_PARENT_GATE set, but the change will fail due to HW NOT allow parent/rate change with clock enabled. It will cause clock HW status mismatch with clock tree info and lead to function issue. Below is an example: usdhc0's pcc clock value is 0xC5000000 during kernel boot up, it means usdhc0 clock is enabled, its parent is APLL_PFD1. In DT file, the usdhc0 clock settings are as below: assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>; assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>; when kernel boot up, the clock tree info is as below, but the usdhc0 PCC register is still 0xC5000000, which means its parent is still from APLL_PFD1, which is incorrect and cause usdhc0 NOT work. nic1_clk 2 2 0 176000000 0 0 50000 usdhc0 0 0 0 176000000 0 0 50000 After making sure the peripheral clock is disabled during clock tree initialization, the usdhc0 is working, and this change is necessary for all i.MX7ULP peripheral clocks. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-5-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-30clk: imx: Update the compsite driver to support imx8ulpJacky Bai
On i.MX8ULP, some peripherals have a sw_rst control resides in the per device PCC clock control register, all others are same as i.MX7ULP, so update the 7ulp clock composite driver to support i.MX8ULP to maxmimize the code reuse. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-4-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-30clk: imx: Update the pllv4 to support imx8ulpJacky Bai
The PLLs used on i.MX8ULP is mostly the same as on i.MX7ULP, except the PLL register offset is changed. Change the PLLv4 driver for code reuse on i.MX7ULP and i.MX8ULP. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-3-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-30dt-bindings: clock: Add imx8ulp clock supportJacky Bai
Add the clock dt-binding file for i.MX8ULP. For pcc node, it will also be used as a reset controller, so add the '#reset-cells' property description and add the pcc reset IDs. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20210914065208.3582128-2-ping.bai@nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-09-30clk: imx: Rework imx_clk_hw_pll14xx wrapperAbel Vesa
It looks much cleaner to just have a macro compared to having a function that passes NULL as dev to the lower-level imx_dev_clk_hw_pll14xx. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/1631521490-17171-9-git-send-email-abel.vesa@nxp.com Reviewed-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-20 17:04:27 +0000