summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-30mwifiex: fix 802.11n/WPA detectionBrian Norris
Commit 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs") adjusted the ieee_types_vendor_header struct, which inadvertently messed up the offsets used in mwifiex_is_wpa_oui_present(). Add that offset back in, mirroring mwifiex_is_rsn_oui_present(). As it stands, commit 63d7ef36103d breaks compatibility with WPA (not WPA2) 802.11n networks, since we hit the "info: Disable 11n if AES is not supported by AP" case in mwifiex_is_network_compatible(). Fixes: 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-30rxrpc: Fix the lack of notification when sendmsg() fails on a DATA packetDavid Howells
Fix the fact that a notification isn't sent to the recvmsg side to indicate a call failed when sendmsg() fails to transmit a DATA packet with the error ENETUNREACH, EHOSTUNREACH or ECONNREFUSED. Without this notification, the afs client just sits there waiting for the call to complete in some manner (which it's not now going to do), which also pins the rxrpc call in place. This can be seen if the client has a scope-level IPv6 address, but not a global-level IPv6 address, and we try and transmit an operation to a server's IPv6 address. Looking in /proc/net/rxrpc/calls shows completed calls just sat there with an abort code of RX_USER_ABORT and an error code of -ENETUNREACH. Fixes: c54e43d752c7 ("rxrpc: Fix missing start of call timeout") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
2019-07-31powerpc/spe: Mark expected switch fall-throughsMichael Ellerman
Mark switch cases where we are expecting to fall through. Fixes errors such as below, seen with mpc85xx_defconfig: arch/powerpc/kernel/align.c: In function 'emulate_spe': arch/powerpc/kernel/align.c:178:8: error: this statement may fall through ret |= __get_user_inatomic(temp.v[3], p++); ^~ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190730141917.21817-1-mpe@ellerman.id.au
2019-07-30rxrpc: Fix potential deadlockDavid Howells
There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which the tries to take the already held lock. Fix this by providing a version of rxrpc_put_peer() that can be called in situations where the lock is already held. The bug may produce the following lockdep report: ============================================ WARNING: possible recursive locking detected 5.2.0-next-20190718 #41 Not tainted -------------------------------------------- kworker/0:3/21678 is trying to acquire lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: __rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435 but task is already holding lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430 Fixes: 330bdcfadcee ("rxrpc: Fix the keepalive generator [ver #2]") Reported-by: syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
2019-07-30drm/bridge: tc358764: Fix build errorYueHaibing
If CONFIG_DRM_TOSHIBA_TC358764=y but CONFIG_DRM_KMS_HELPER=m, building fails: drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x228): undefined reference to `drm_atomic_helper_connector_reset' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x240): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x268): undefined reference to `drm_atomic_helper_connector_duplicate_state' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x270): undefined reference to `drm_atomic_helper_connector_destroy_state' Like TC358767, select DRM_KMS_HELPER to fix this, and change to select DRM_PANEL to avoid recursive dependency. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729090520.25968-1-yuehaibing@huawei.com
2019-07-30Revert "mac80211: set NETIF_F_LLTX when using intermediate tx queues"Johannes Berg
Revert this for now, it has been reported multiple times that it completely breaks connectivity on various devices. Cc: stable@vger.kernel.org Fixes: 8dbb000ee73b ("mac80211: set NETIF_F_LLTX when using intermediate tx queues") Reported-by: Jean Delvare <jdelvare@suse.de> Reported-by: Peter Lebbing <peter@digitalbrains.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-30drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=mYueHaibing
If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m, build fails: drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe': lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add' Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: dbb58bfd9ae6 ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.com
2019-07-30driver core: platform: return -ENXIO for missing GpioIntBrian Norris
Commit daaef255dc96 ("driver: platform: Support parsing GpioInt 0 in platform_get_irq()") broke the Embedded Controller driver on most LPC Chromebooks (i.e., most x86 Chromebooks), because cros_ec_lpc expects platform_get_irq() to return -ENXIO for non-existent IRQs. Unfortunately, acpi_dev_gpio_irq_get() doesn't follow this convention and returns -ENOENT instead. So we get this error from cros_ec_lpc: couldn't retrieve IRQ number (-2) I see a variety of drivers that treat -ENXIO specially, so rather than fix all of them, let's fix up the API to restore its previous behavior. I reported this on v2 of this patch: https://lore.kernel.org/lkml/20190220180538.GA42642@google.com/ but apparently the patch had already been merged before v3 got sent out: https://lore.kernel.org/lkml/20190221193429.161300-1-egranata@chromium.org/ and the result is that the bug landed and remains unfixed. I differ from the v3 patch by: * allowing for ret==0, even though acpi_dev_gpio_irq_get() specifically documents (and enforces) that 0 is not a valid return value (noted on the v3 review) * adding a small comment Reported-by: Brian Norris <briannorris@chromium.org> Reported-by: Salvatore Bellizzi <salvatore.bellizzi@linux.seppia.net> Cc: Enrico Granata <egranata@chromium.org> Cc: <stable@vger.kernel.org> Fixes: daaef255dc96 ("driver: platform: Support parsing GpioInt 0 in platform_get_irq()") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Enrico Granata <egranata@google.com> Link: https://lore.kernel.org/r/20190729204954.25510-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30Merge branch 'master' of git://blackhole.kfki.hu/nfPablo Neira Ayuso
Jozsef Kadlecsik says: ==================== ipset patches for the nf tree - When the support of destination MAC addresses for hash:mac sets was introduced, it was forgotten to add the same functionality to hash:ip,mac types of sets. The patch from Stefano Brivio adds the missing part. - When the support of destination MAC addresses for hash:mac sets was introduced, a copy&paste error was made in the code of the hash:ip,mac and bitmap:ip,mac types: the MAC address in these set types is in the second position and not in the first one. Stefano Brivio's patch fixes the issue. - There was still a not properly handled concurrency handling issue between renaming and listing sets at the same time, reported by Shijie Luo. ==================== Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-30netfilter: ebtables: also count base chain policiesFlorian Westphal
ebtables doesn't include the base chain policies in the rule count, so we need to add them manually when we call into the x_tables core to allocate space for the comapt offset table. This lead syzbot to trigger: WARNING: CPU: 1 PID: 9012 at net/netfilter/x_tables.c:649 xt_compat_add_offset.cold+0x11/0x36 net/netfilter/x_tables.c:649 Reported-by: syzbot+276ddebab3382bbf72db@syzkaller.appspotmail.com Fixes: 2035f3ff8eaa ("netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-30powerpc/nvdimm: Pick nearby online node if the device node is not onlineAneesh Kumar K.V
Currently, nvdimm subsystem expects the device numa node for SCM device to be an online node. It also doesn't try to bring the device numa node online. Hence if we use a non-online numa node as device node we hit crashes like below. This is because we try to access uninitialized NODE_DATA in different code paths. cpu 0x0: Vector: 300 (Data Access) at [c0000000fac53170] pc: c0000000004bbc50: ___slab_alloc+0x120/0xca0 lr: c0000000004bc834: __slab_alloc+0x64/0xc0 sp: c0000000fac53400 msr: 8000000002009033 dar: 73e8 dsisr: 80000 current = 0xc0000000fabb6d80 paca = 0xc000000003870000 irqmask: 0x03 irq_happened: 0x01 pid = 7, comm = kworker/u16:0 Linux version 5.2.0-06234-g76bd729b2644 (kvaneesh@ltc-boston123) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #135 SMP Thu Jul 11 05:36:30 CDT 2019 enter ? for help [link register ] c0000000004bc834 __slab_alloc+0x64/0xc0 [c0000000fac53400] c0000000fac53480 (unreliable) [c0000000fac53500] c0000000004bc818 __slab_alloc+0x48/0xc0 [c0000000fac53560] c0000000004c30a0 __kmalloc_node_track_caller+0x3c0/0x6b0 [c0000000fac535d0] c000000000cfafe4 devm_kmalloc+0x74/0xc0 [c0000000fac53600] c000000000d69434 nd_region_activate+0x144/0x560 [c0000000fac536d0] c000000000d6b19c nd_region_probe+0x17c/0x370 [c0000000fac537b0] c000000000d6349c nvdimm_bus_probe+0x10c/0x230 [c0000000fac53840] c000000000cf3cc4 really_probe+0x254/0x4e0 [c0000000fac538d0] c000000000cf429c driver_probe_device+0x16c/0x1e0 [c0000000fac53950] c000000000cf0b44 bus_for_each_drv+0x94/0x130 [c0000000fac539b0] c000000000cf392c __device_attach+0xdc/0x200 [c0000000fac53a50] c000000000cf231c bus_probe_device+0x4c/0xf0 [c0000000fac53a90] c000000000ced268 device_add+0x528/0x810 [c0000000fac53b60] c000000000d62a58 nd_async_device_register+0x28/0xa0 [c0000000fac53bd0] c0000000001ccb8c async_run_entry_fn+0xcc/0x1f0 [c0000000fac53c50] c0000000001bcd9c process_one_work+0x46c/0x860 [c0000000fac53d20] c0000000001bd4f4 worker_thread+0x364/0x5f0 [c0000000fac53db0] c0000000001c7260 kthread+0x1b0/0x1c0 [c0000000fac53e20] c00000000000b954 ret_from_kernel_thread+0x5c/0x68 The patch tries to fix this by picking the nearest online node as the SCM node. This does have a problem of us losing the information that SCM node is equidistant from two other online nodes. If applications need to understand these fine-grained details we should express then like x86 does via /sys/devices/system/node/nodeX/accessY/initiators/ With the patch we get # numactl -H available: 2 nodes (0-1) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 1 size: 130865 MB node 1 free: 129130 MB node distances: node 0 1 0: 10 20 1: 20 10 # cat /sys/bus/nd/devices/region0/numa_node 0 # dmesg | grep papr_scm [ 91.332305] papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Region registered with target node 2 and online node 0 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190729095128.23707-1-aneesh.kumar@linux.ibm.com
2019-07-30ALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_checkHillf Danton
syzbot found the following crash on: general protection fault: 0000 [#1] SMP KASAN RIP: 0010:snd_usb_pipe_sanity_check+0x80/0x130 sound/usb/helper.c:75 Call Trace: snd_usb_motu_microbookii_communicate.constprop.0+0xa0/0x2fb sound/usb/quirks.c:1007 snd_usb_motu_microbookii_boot_quirk sound/usb/quirks.c:1051 [inline] snd_usb_apply_boot_quirk.cold+0x163/0x370 sound/usb/quirks.c:1280 usb_audio_probe+0x2ec/0x2010 sound/usb/card.c:576 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 .... It was introduced in commit 801ebf1043ae for checking pipe and endpoint types. It is fixed by adding a check of the ep pointer in question. BugLink: https://syzkaller.appspot.com/bug?extid=d59c4387bfb6eced94e2 Reported-by: syzbot <syzbot+d59c4387bfb6eced94e2@syzkaller.appspotmail.com> Fixes: 801ebf1043ae ("ALSA: usb-audio: Sanity checks for each pipe and EP types") Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-30usb: typec: tcpm: remove tcpm dir if no childrenLi Jun
If config tcpm as module, module unload will not remove tcpm dir, then the next module load will have problem: the rootdir is NULL but tcpm dir is still there, so tcpm_debugfs_init() will create tcpm dir again with failure, fix it by remove the tcpm dir if no children. Cc: stable@vger.kernel.org # v4.15+ Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") Signed-off-by: Li Jun <jun.li@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190717080646.30421-2-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30usb: typec: tcpm: free log buf memory when remove debug fileLi Jun
The logbuffer memory should be freed when remove debug file. Cc: stable@vger.kernel.org # v4.15+ Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") Signed-off-by: Li Jun <jun.li@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190717080646.30421-1-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30usb: typec: tcpm: Add NULL check before dereferencing configGuenter Roeck
When instantiating tcpm on an NXP OM 13588 board with NXP PTN5110, the following crash is seen when writing into the 'preferred_role' sysfs attribute. Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = f69149ad [00000028] *pgd=00000000 Internal error: Oops: 5 [#1] THUMB2 Modules linked in: tcpci tcpm CPU: 0 PID: 1882 Comm: bash Not tainted 5.1.18-sama5-armv7-r2 #4 Hardware name: Atmel SAMA5 PC is at tcpm_try_role+0x3a/0x4c [tcpm] LR is at tcpm_try_role+0x15/0x4c [tcpm] pc : [<bf8000e2>] lr : [<bf8000bd>] psr: 60030033 sp : dc1a1e88 ip : c03fb47d fp : 00000000 r10: dc216190 r9 : dc1a1f78 r8 : 00000001 r7 : df4ae044 r6 : dd032e90 r5 : dd1ce340 r4 : df4ae054 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : df4ae044 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment none Control: 50c53c7d Table: 3efec059 DAC: 00000051 Process bash (pid: 1882, stack limit = 0x6a6d4aa5) Stack: (0xdc1a1e88 to 0xdc1a2000) 1e80: dd05d808 dd1ce340 00000001 00000007 dd1ce340 c03fb4a7 1ea0: 00000007 00000007 dc216180 00000000 00000000 c01e1e03 00000000 00000000 1ec0: c0907008 dee98b40 c01e1d5d c06106c4 00000000 00000000 00000007 c0194e8b 1ee0: 0000000a 00000400 00000000 c01a97db dc22bf00 ffffe000 df4b6a00 df745900 1f00: 00000001 00000001 000000dd c01a9c2f 7aeab3be c0907008 00000000 dc22bf00 1f20: c0907008 00000000 00000000 00000000 00000000 7aeab3be 00000007 dee98b40 1f40: 005dc318 dc1a1f78 00000000 00000000 00000007 c01969f7 0000000a c01a20cb 1f60: dee98b40 c0907008 dee98b40 005dc318 00000000 c0196b9b 00000000 00000000 1f80: dee98b40 7aeab3be 00000074 005dc318 b6f3bdb0 00000004 c0101224 dc1a0000 1fa0: 00000004 c0101001 00000074 005dc318 00000001 005dc318 00000007 00000000 1fc0: 00000074 005dc318 b6f3bdb0 00000004 00000007 00000007 00000000 00000000 1fe0: 00000004 be800880 b6ed35b3 b6e5c746 60030030 00000001 00000000 00000000 [<bf8000e2>] (tcpm_try_role [tcpm]) from [<c03fb4a7>] (preferred_role_store+0x2b/0x5c) [<c03fb4a7>] (preferred_role_store) from [<c01e1e03>] (kernfs_fop_write+0xa7/0x150) [<c01e1e03>] (kernfs_fop_write) from [<c0194e8b>] (__vfs_write+0x1f/0x104) [<c0194e8b>] (__vfs_write) from [<c01969f7>] (vfs_write+0x6b/0x104) [<c01969f7>] (vfs_write) from [<c0196b9b>] (ksys_write+0x43/0x94) [<c0196b9b>] (ksys_write) from [<c0101001>] (ret_fast_syscall+0x1/0x62) Since commit 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd config from device properties"), the 'config' pointer in struct tcpc_dev is optional when registering a Type-C port. Since it is optional, we have to check if it is NULL before dereferencing it. Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Fixes: 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd config from device properties") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Reviewed-by: Jun Li <jun.li@nxp.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/1563979112-22483-1-git-send-email-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30Merge tag 'gvt-fixes-2019-07-30' of https://github.com/intel/gvt-linux into ↵Jani Nikula
drm-intel-fixes gvt-fixes-2019-07-30 - Guard against potential ggtt access error (Xiong) - Fix includecheck (Zhenyu) - Fix cache entry for guest page mapping found by 2M ppgtt guest (Xiaolin) - Fix runtime pm warning (Xiaolin) - Fix shadow mm settlement for Windows guest reset failure (Colin) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190730070020.GX8319@zhen-hp.sh.intel.com
2019-07-30Merge tag 'perf-core-for-mingo-5.4-20190729' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf trace: Arnaldo Carvalho de Melo: - Use BPF_MAP_TYPE_PROG_ARRAY + bpf_tail_call() for augmenting raw syscalls, i.e. copy pointers passed to/from userspace. The use of a table per syscall to tell the BPF program what to copy made the raw_syscalls:sys_enter/exit programs a bit complex, the scratch space would have to be bigger to allow for checking all args to see which ones were a pathname, so use a PROG_ARRAY map instead, test it with syscalls that receive multiple pathnames at different registers (rename, renameat, etc). - Beautify various syscalls using this new infrastructure, and also add code that looks for syscalls with BPF augmenters, such as "open", and then reuse it with syscalls not yet having a specific augmenter, but that copies the same argument with the same type, say "statfs" can initially reuse "open", beautifier, as both have as its first arg a "const char *". - Do not using fd->pathname beautifier when the 'close' syscall isn't enabled, as we can't invalidate that mapping. core: Jiri Olsa: - Introduce tools/perf/lib/, that eventually will move to tools/lib/perf/, to allow other tools to use the abstractions and code perf uses to set up the perf ring buffer and set up the many possible combinations in allowed by the kernel, starting with 'struct perf_evsel' and 'struct perf_evlist'. perf vendor events: Michael Petlan: - Add missing event description to power9 event definitions. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-30Merge tag 'misc-habanalabs-fixes-2019-07-29' of ↵Greg Kroah-Hartman
git://people.freedesktop.org/~gabbayo/linux into char-misc-next Oded writes: This tag contains two fixes when running in BE architecture: - Fix for F/W download. The F/W is in LE so use a function that doesn't do bytw-swapping. - Fix for polling on host memory locations that are written by the device. The device always works in LE, so we need to do byte-swap when polling on those locations. * tag 'misc-habanalabs-fixes-2019-07-29' of git://people.freedesktop.org/~gabbayo/linux: habanalabs: fix host memory polling in BE architecture habanalabs: fix F/W download in BE architecture
2019-07-30drm/i915/gvt: Adding ppgtt to GVT GEM context after shadow pdps settled.Colin Xu
Windows guest can't run after force-TDR with host log: ... gvt: vgpu 1: workload shadow ppgtt isn't ready gvt: vgpu 1: fail to dispatch workload, skip ... The error is raised by set_context_ppgtt_from_shadow(), when it checks and found the shadow_mm isn't marked as shadowed. In work thread before each submission, a shadow_mm is set to shadowed in: shadow_ppgtt_mm() <-intel_vgpu_pin_mm() <-prepare_workload() <-dispatch_workload() <-workload_thread() However checking whether or not shadow_mm is shadowed is prior to it: set_context_ppgtt_from_shadow() <-dispatch_workload() <-workload_thread() In normal case, create workload will check the existence of shadow_mm, if not it will create a new one and marked as shadowed. If already exist it will reuse the old one. Since shadow_mm is reused, checking of shadowed in set_context_ppgtt_from_shadow() actually always see the state set in creation, but not the state set in intel_vgpu_pin_mm(). When force-TDR, all engines are reset, since it's not dmlr level, all ppgtt_mm are invalidated but not destroyed. Invalidation will mark all reused shadow_mm as not shadowed but still keeps in ppgtt_mm_list_head. If workload submission phase those shadow_mm are reused with shadowed not set, then set_context_ppgtt_from_shadow() will report error. Pin for context after shadow_mm pinned and shadow pdps settled. v2: Move set_context_ppgtt_from_shadow() after prepare_workload(). (zhenyu) v3: Move set_context_ppgtt_from_shadow() after shadow pdps updated.(zhenyu) Fixes: 4f15665ccbba ("drm/i915: Add ppgtt to GVT GEM context") Cc: stable@vger.kernel.org Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: grab runtime pm first for forcewake useXiaolin Zhang
in workload_thread, it should grab runtime pm wakelock and later uncore forcewake get will check rpm wakelock held successfully. otherwise, sometimes, rpm wakelock not hold and print call trace below: Call Trace: intel_uncore_forcewake_get+0x15/0x20 [i915] workload_thread+0x5f9/0x16f0 [i915] ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to+0x85/0x3f0 ? __switch_to_asm+0x40/0x70 ? do_wait_intr_irq+0x90/0x90 kthread+0x121/0x140 ? intel_vgpu_clean_workloads+0x100/0x100 [i915] ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 --[ end trace 86525f742a02e12c ]-- v2: adapted to use rpm structure. Fixes: 251d46b0875c ("drm/i915/gvt: Pin the per-engine GVT shadow contexts") Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: fix incorrect cache entry for guest page mappingXiaolin Zhang
GPU hang observed during the guest OCL conformance test which is caused by THP GTT feature used durning the test. It was observed the same GFN with different size (4K and 2M) requested from the guest in GVT. So during the guest page dma map stage, it is required to unmap first with orginal size and then remap again with requested size. Fixes: b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support") Cc: stable@vger.kernel.org Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: Checking workload's gma earlierXiong Zhang
Workload contains RB and WA_CTX which are in ggtt space, if they aren't in valid ggtt space, the workload shouldn't be shadowed and scanned. So checking them earlier to avoid shadow them. Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: Don't use ggtt_validdate_range() with size=0Xiong Zhang
Use vgpu_gmadr_is_valid() directly instead. Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: Warning for invalid ggtt accessXiong Zhang
Instead of silently return virtual ggtt entries that guest is allowed to access, this patch add extra range check. If guest read out of range, it will print a warning and return 0. If guest write out of range, the write will be dropped without any message. Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-30drm/i915/gvt: remove duplicate include of trace.hZhenyu Wang
This removes duplicate include of trace.h. Found by Hariprasad Kelam with includecheck. Reported-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2019-07-29scsi: fcoe: pass in fcoe_rport structure instead of fc_rport_privHannes Reinecke
Instead of using the generic 'fc_rport_priv' structure as argument and then having to painstakingly outcast this to fcoe_rport we should be passing the fcoe_rport structure itself and reduce complexity. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-29scsi: fcoe: Embed fc_rport_priv in fcoe_rport structureHannes Reinecke
Gcc-9 complains for a memset across pointer boundaries, which happens as the code tries to allocate a flexible array on the stack. Turns out we cannot do this without relying on gcc-isms, so with this patch we'll embed the fc_rport_priv structure into fcoe_rport, can use the normal 'container_of' outcast, and will only have to do a memset over one structure. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-29scsi: libfc: Whitespace cleanup in libfc.hHannes Reinecke
No functional change. [mkp: typo] Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-29net: smc911x: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/net/ethernet/smsc/smc911x.c: In function ‘smc911x_phy_detect’: drivers/net/ethernet/smsc/smc911x.c:677:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (cfg & HW_CFG_EXT_PHY_DET_) { ^ drivers/net/ethernet/smsc/smc911x.c:715:3: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29libata: zpodd: Fix small read overflow in zpodd_get_mech_type()Kees Cook
Jeffrin reported a KASAN issue: BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70 Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149 ... The buggy address belongs to the variable: cdb.48319+0x0/0x40 Much like commit 18c9a99bce2a ("libata: zpodd: small read overflow in eject_tray()"), this fixes a cdb[] buffer length, this time in zpodd_get_mech_type(): We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Reported-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Fixes: afe759511808c ("libata: identify and init ZPODD devices") Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/ Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-29pinctrl: aspeed: Make aspeed_pinmux_ips staticYueHaibing
Fix sparse warning: drivers/pinctrl/aspeed/pinmux-aspeed.c:8:12: warning: symbol 'aspeed_pinmux_ips' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190711142457.37028-1-yuehaibing@huawei.com Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29perf vendor events power9: Added missing event descriptionsMichael Petlan
Documentation source: https://wiki.raptorcs.com/w/images/6/6b/POWER9_PMU_UG_v12_28NOV2018_pub.pdf Signed-off-by: Michael Petlan <mpetlan@redhat.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Carl Love <cel@us.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Paul Clarke <pc@us.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: linuxppc-dev@ozlabs.org LPU-Reference: 20190719100837.7503-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Initial documentationJiri Olsa
Add initial drafts of documentation files, hugely unfinished. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-80-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_evsel__enable/disable testJiri Olsa
Add simple perf_evsel enable/disable test together with evsel counter reading interface. Committer testing: # make -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-evlist-a LINK test-evsel-a LINK test-cpumap-so LINK test-threadmap-so LINK test-evlist-so LINK test-evsel-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-79-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_evlist__enable/disable testJiri Olsa
Add simple perf_evlist enable/disable test together with evlist counter reading interface. Committer testing: # make -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-evlist-a LINK test-evsel-a LINK test-cpumap-so LINK test-threadmap-so LINK test-evlist-so LINK test-evsel-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-78-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_evsel testsJiri Olsa
Add 2 simple perf_evsel tests to test counters reading interface through the struct evsel object. Committer testing: # make -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-evlist-a LINK test-evsel-a LINK test-cpumap-so LINK test-threadmap-so LINK test-evlist-so LINK test-evsel-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK - running test-evsel.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-77-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_evlist testJiri Olsa
Add 2 simple perf_evlist tests to test counters reading interface through the struct evlist object. Committer testing: # make -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-evlist-a LINK test-cpumap-so LINK test-threadmap-so LINK test-evlist-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK - running test-evlist.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-76-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_thread_map testJiri Olsa
Add simple perf_thread_map tests. Committer testing: $ make O=/tmp/build/perf -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-threadmap-a LINK test-cpumap-so LINK test-threadmap-so running static: - running test-cpumap.c...OK - running test-threadmap.c...OK running dynamic: - running test-cpumap.c...OK - running test-threadmap.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' $ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-75-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_cpu_map testJiri Olsa
Add simple perf_cpu_map tests. Committer testing: One has to build it in the source tree, a limitation that should be fixed in followup patches: $ make O=/tmp/build/perf -C tools/perf/lib make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK /tmp/build/perf/libperf.so.0.0.1 GEN /tmp/build/perf/libperf.pc make: Leaving directory '/home/acme/git/perf/tools/perf/lib' $ make O=/tmp/build/perf -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a gcc: error: ../libperf.a: No such file or directory make[1]: *** [Makefile:22: test-cpumap-a] Error 1 make: *** [Makefile:115: tests] Error 2 make: Leaving directory '/home/acme/git/perf/tools/perf/lib' [acme@quaco perf]$ make -C tools/perf/lib make: Entering directory '/home/acme/git/perf/tools/perf/lib' HOSTCC fixdep.o HOSTLD fixdep-in.o LINK fixdep CC core.o CC cpumap.o CC threadmap.o CC evsel.o CC evlist.o CC zalloc.o CC xyarray.o CC lib.o LD libperf-in.o AR libperf.a LINK libperf.so.0.0.1 GEN libperf.pc make: Leaving directory '/home/acme/git/perf/tools/perf/lib' $ make O=/tmp/build/perf -C tools/perf/lib tests make: Entering directory '/home/acme/git/perf/tools/perf/lib' LINK test-cpumap-a LINK test-cpumap-so running static: - running test-cpumap.c...OK running dynamic: - running test-cpumap.c...OK make: Leaving directory '/home/acme/git/perf/tools/perf/lib' $ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-74-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add tests supportJiri Olsa
Adding simple test framework, now empty. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-73-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add install targetsJiri Olsa
Add install targets (mostly copied from tools/lib/bpf), it's now possible to install libperf with: $ make DESTDIR=/tmp/krava install INSTALL libperf.a INSTALL libperf.so INSTALL libperf.so.0 INSTALL libperf.so.0.0.1 INSTALL headers INSTALL libperf.pc $ find /tmp/krava/ /tmp/krava/ /tmp/krava/include /tmp/krava/include/perf /tmp/krava/include/perf/evsel.h /tmp/krava/include/perf/evlist.h /tmp/krava/include/perf/threadmap.h /tmp/krava/include/perf/cpumap.h /tmp/krava/include/perf/core.h /tmp/krava/lib64 /tmp/krava/lib64/pkgconfig /tmp/krava/lib64/pkgconfig/libperf.pc /tmp/krava/lib64/libperf.so.0.0.1 /tmp/krava/lib64/libperf.so.0 /tmp/krava/lib64/libperf.so /tmp/krava/lib64/libperf.a Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-72-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_evsel__attr() functionJiri Olsa
Add a perf_evsel__attr() function to get attr pointer from a perf_evsel instance. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-71-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Adopt perf_evlist__enable()/disable() functions from perfJiri Olsa
Adopt the following functions from tools/perf: perf_evlist__enable() perf_evlist__disable() Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-70-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Adopt simplified perf_evlist__open()/close() functions from tools/perfJiri Olsa
Add the following functions: perf_evlist__open() perf_evlist__close() It's a simplified version of perf's evlist__open() without the sampling id index calculations. We can try to merge it in the future when we need it in some new libperf user. Also adopt some helper evlist traversing macros. In the future we can remove them from util/evlist.h, but that requires also some other changes. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-69-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_evsel__cpus()/threads() functionsJiri Olsa
Add the following functions: perf_evsel__cpus() perf_evsel__threads() to access the evsel's cpus and threads objects. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-68-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Add perf_cpu_map__for_each_cpu() macroJiri Olsa
Add the following macro to libperf: perf_cpu_map__for_each_cpu() And its related functions: perf_cpu_map__cpu() perf_cpu_map__nr() That will allow hiding how it is implemented. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-67-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Adopt perf_evsel__enable()/disable()/apply_filter() functionsJiri Olsa
Move the following functions: evsel__enable() evsel__disable() evsel__apply_filter() to libperf with the following names: perf_evsel__enable() perf_evsel__disable() perf_evsel__apply_filter() Export only perf_evsel__enable()/disable(), keeping the perf_evsel__apply_filter() one private for the moment. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-66-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Adopt perf_evsel__read() function from tools/perfJiri Olsa
Move the perf_evsel__read() function to libperf as a public interface together with struct perf_counts_values for returning counter values. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-65-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Adopt simplified perf_evsel__close() function from tools/perfJiri Olsa
Add perf_evsel__close() function to libperf while keeping a tools/perf specific evsel__close() to free ids. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-64-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-29libperf: Adopt simplified perf_evsel__open() function from tools/perfJiri Olsa
Add a perf_evsel__open() function to libperf. It's a simplified version of evsel__open() without the fallback mechanism. We can try to merge it in the future to libperf, but it has many details, lets start simple, requiring the latest kernel, perf should continue using its evsel__open() version, continuing to support running on older kernels when possible. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-63-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-13 13:40:51 +0000