| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These make an excess warning message go away and fix a recently
introduced boot failure on a vintage machine.
Specifics:
- Change the log level of the "table not found" message in
acpi_table_parse_entries_array() to debug to prevent it from
showing up in the logs unnecessarily (Dan Williams)
- Add a C-state limit quirk for 32-bit ThinkPad T40 to prevent it
from crashing on boot after recent changes in the ACPI processor
driver (Woody Suwalski)"
* tag 'acpi-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40
ACPI: tables: Quiet ACPI table not found warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A set of three fixes, all aimed at fixing some fallout from the recent
sparse hart ID support"
* tag 'riscv-for-linus-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix IPI/RFENCE hmask on non-monotonic hartid ordering
RISC-V: Fix handling of empty cpu masks
RISC-V: Fix hartid mask handling for hartid 31 and up
|
|
When we switch from emulated PS/2 to native (RMI4 or Elan) protocols, we
create SMBus companion devices that are attached to I2C/SMBus controllers.
However, when suspending and resuming, we also need to make sure that we
take into account the PS/2 device they are associated with, so that PS/2
device is suspended after the companion and resumed before it, otherwise
companions will not work properly. Before I2C devices were marked for
asynchronous suspend/resume, this ordering happened naturally, but now we
need to enforce it by establishing device links, with PS/2 devices being
suppliers and SMBus companions being consumers.
Fixes: 172d931910e1 ("i2c: enable async suspend/resume on i2c client devices")
Reported-and-tested-by: Hugh Dickins <hughd@google.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/89456fcd-a113-4c82-4b10-a9bcaefac68f@google.com
Link: https://lore.kernel.org/r/YgwQN8ynO88CPMju@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Clang static analysis reports this issues
ice_common.c:5008:21: warning: The left expression of the compound
assignment is an uninitialized value. The computed value will
also be garbage
ldo->phy_type_low |= ((u64)buf << (i * 16));
~~~~~~~~~~~~~~~~~ ^
When called from ice_cfg_phy_fec() ldo is the uninitialized local
variable tlv. So initialize.
Fixes: ea78ce4dab05 ("ice: add link lenient and default override support")
Signed-off-by: Tom Rix <trix@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Clang static analysis reports this issue
time64.h:69:50: warning: The left operand of '+'
is a garbage value
set_normalized_timespec64(&ts_delta, lhs.tv_sec + rhs.tv_sec,
~~~~~~~~~~ ^
In ice_ptp_adjtime_nonatomic(), the timespec64 variable 'now'
is set by ice_ptp_gettimex64(). This function can fail
with -EBUSY, so 'now' can have a gargbage value.
So check the return.
Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices")
Signed-off-by: Tom Rix <trix@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit c503e63200c6 ("ice: Stop processing VF messages during teardown")
introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is
intended to prevent some issues with concurrently handling messages from
VFs while tearing down the VFs.
This change was motivated by crashes caused while tearing down and
bringing up VFs in rapid succession.
It turns out that the fix actually introduces issues with the VF driver
caused because the PF no longer responds to any messages sent by the VF
during its .remove routine. This results in the VF potentially removing
its DMA memory before the PF has shut down the device queues.
Additionally, the fix doesn't actually resolve concurrency issues within
the ice driver. It is possible for a VF to initiate a reset just prior
to the ice driver removing VFs. This can result in the remove task
concurrently operating while the VF is being reset. This results in
similar memory corruption and panics purportedly fixed by that commit.
Fix this concurrency at its root by protecting both the reset and
removal flows using the existing VF cfg_lock. This ensures that we
cannot remove the VF while any outstanding critical tasks such as a
virtchnl message or a reset are occurring.
This locking change also fixes the root cause originally fixed by commit
c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we
can simply revert it.
Note that I kept these two changes together because simply reverting the
original commit alone would leave the driver vulnerable to worse race
conditions.
Fixes: c503e63200c6 ("ice: Stop processing VF messages during teardown")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Accidentally filter flag for none encapsulated l4 port field is always
set. Even if user wants to add encapsulated l4 port field.
Remove this unnecessary flag setting.
Fixes: 9e300987d4a81 ("ice: VXLAN and Geneve TC support")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In switchdev mode, slow-path rules need to match all protocols, in order
to correctly redirect unfiltered or missed packets to the uplink. To set
this up for the virtual function to uplink flow, the rule that redirects
packets to the control VSI must have the tunnel type set to
ICE_SW_TUN_AND_NON_TUN. As a result of that new tunnel type being set,
ice_get_compat_fv_bitmap will select ICE_PROF_ALL. At that point all
profiles would be selected for this rule, resulting in the desired
behavior. Without this change slow-path would not work with
tunnel protocols.
Fixes: 8b032a55c1bd ("ice: low level support for tunnels")
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Merge fix for a recent boot lockup regression on 32-bit ThinkPad T40.
* acpi-processor:
ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"MTD changes:
- Qcom:
- Don't print error message on -EPROBE_DEFER
- Fix kernel panic on skipped partition
- Fix missing free for pparts in cleanup
- phram: Prevent divide by zero bug in phram_setup()
Raw NAND controller changes:
- ingenic: Fix missing put_device in ingenic_ecc_get
- qcom: Fix clock sequencing in qcom_nandc_probe()
- omap2: Prevent invalid configuration and build error
- gpmi: Don't leak PM reference in error path
- brcmnand: Fix incorrect sub-page ECC status"
* tag 'mtd/fixes-for-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status
mtd: rawnand: gpmi: don't leak PM reference in error path
mtd: phram: Prevent divide by zero bug in phram_setup()
mtd: rawnand: omap2: Prevent invalid configuration and build error
mtd: parsers: qcom: Fix missing free for pparts in cleanup
mtd: parsers: qcom: Fix kernel panic on skipped partition
mtd: parsers: qcom: Don't print error message on -EPROBE_DEFER
mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe()
mtd: rawnand: ingenic: Fix missing put_device in ingenic_ecc_get
|
|
Pull block fixes from Jens Axboe:
- Surprise removal fix (Christoph)
- Ensure that pages are zeroed before submitted for userspace IO
(Haimin)
- Fix blk-wbt accounting issue with BFQ (Laibin)
- Use bsize for discard granularity in loop (Ming)
- Fix missing zone handling in blk_complete_request() (Pankaj)
* tag 'block-5.17-2022-02-17' of git://git.kernel.dk/linux-block:
block/wbt: fix negative inflight counter when remove scsi device
block: fix surprise removal for drivers calling blk_set_queue_dying
block-map: add __GFP_ZERO flag for alloc_page in function bio_copy_kern
block: loop:use kstatfs.f_bsize of backing file to set discard granularity
block: Add handling for zone append command in blk_complete_request
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small patches, mostly for old and new regressions and
device-specific fixes.
- Regression fixes regarding ALSA core SG-buffer helpers
- Regression fix for Realtek HD-audio mutex deadlock
- Regression fix for USB-audio PM resume error
- More coverage of ASoC core control API notification fixes
- Old regression fixes for HD-audio probe mask
- Fixes for ASoC Realtek codec work handling
- Other device-specific quirks / fixes"
* tag 'sound-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ASoC: intel: skylake: Set max DMA segment size
ASoC: SOF: hda: Set max DMA segment size
ALSA: hda: Set max DMA segment size
ALSA: hda/realtek: Fix deadlock by COEF mutex
ALSA: usb-audio: Don't abort resume upon errors
ALSA: hda: Fix missing codec probe on Shenker Dock 15
ALSA: hda: Fix regression on forced probe mask option
ALSA: hda/realtek: Add quirk for Legion Y9000X 2019
ALSA: usb-audio: revert to IMPLICIT_FB_FIXED_DEV for M-Audio FastTrack Ultra
ASoC: wm_adsp: Correct control read size when parsing compressed buffer
ASoC: qcom: Actually clear DMA interrupt register for HDMI
ALSA: memalloc: invalidate SG pages before sync
ALSA: memalloc: Fix dma_need_sync() checks
MAINTAINERS: update cros_ec_codec maintainers
ASoC: rt5682: do not block workqueue if card is unbound
ASoC: rt5668: do not block workqueue if card is unbound
ASoC: rt5682s: do not block workqueue if card is unbound
ASoC: tas2770: Insert post reset delay
ASoC: Revert "ASoC: mediatek: Check for error clk pointer"
ASoC: amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix wrong branch label in the EL2 GICv3 initialisation code"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Correct wrong label in macro __init_el2_gicv3
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix boot failure on 603 with DEBUG_PAGEALLOC and KFENCE
- Fix 32-build with newer binutils that rejects 'ptesync' etc
Thanks to Anders Roxell, Christophe Leroy, and Maxime Bizon.
* tag 'powerpc-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/lib/sstep: fix 'ptesync' build error
powerpc/603: Fix boot failure with DEBUG_PAGEALLOC and KFENCE
|
|
Pull cifs fixes from Steve French:
"Six small smb3 client fixes, three for stable:
- fix for snapshot mount option
- two ACL related fixes
- use after free race fix
- fix for confusing warning message logged with older dialects"
* tag '5.17-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix confusing unneeded warning message on smb2.1 and earlier
cifs: modefromsids must add an ACE for authenticated users
cifs: fix double free race when mount fails in cifs_get_root()
cifs: do not use uninitialized data in the owner/group sid
cifs: fix set of group SID via NTSD xattrs
smb3: fix snapshot mount option
|
|
devm_kmalloc() returns a pointer to allocated memory on success, NULL
on failure. While lp->indirect_lock is allocated by devm_kmalloc()
without proper check. It is better to check the value of it to
prevent potential wrong memory access.
Fixes: f14f5c11f051 ("net: ll_temac: Support indirect_mutex share within TEMAC IP")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
UDP sendmsg() can be lockless, this is causing all kinds
of data races.
This patch converts sk->sk_tskey to remove one of these races.
BUG: KCSAN: data-race in __ip_append_data / __ip_append_data
read to 0xffff8881035d4b6c of 4 bytes by task 8877 on cpu 1:
__ip_append_data+0x1c1/0x1de0 net/ipv4/ip_output.c:994
ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636
udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249
inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
write to 0xffff8881035d4b6c of 4 bytes by task 8880 on cpu 0:
__ip_append_data+0x1d8/0x1de0 net/ipv4/ip_output.c:994
ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636
udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249
inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000054d -> 0x0000054e
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 8880 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00167-gdcb85f85fa6f-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A malicious device can leak heap data to user space
providing bogus frame lengths. Introduce a sanity check.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Flow table lookup is skipped if packet either went through ct clear
action (which set the IP_CT_UNTRACKED flag on the packet), or while
switching zones and there is already a connection associated with
the packet. This will result in no SW offload of the connection,
and the and connection not being removed from flow table with
TCP teardown (fin/rst packet).
To fix the above, remove these unneccary checks in flow
table lookup.
Fixes: 46475bb20f4b ("net/sched: act_ct: Software offload of established flows")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.
[ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called
[ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called
...
[ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280
crash> bt
...
PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd"
...
#9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
[exception RIP: dma_pool_alloc+0x1ab]
RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046
RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000
RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090
RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00
R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0
R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
#11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
#12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
#13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
#14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
#15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
#16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
#17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
#18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
#19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
#20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
#21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
#22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
#23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
#24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
#25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
#26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92
crash> net_device.state ffff89443b0c0000
state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER)
To prevent this scenario, we also make sure that the netdevice is present.
Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a 6pack device is detaching, the sixpack_close() will act to cleanup
necessary resources. Although del_timer_sync() in sixpack_close()
won't return if there is an active timer, one could use mod_timer() in
sp_xmit_on_air() to wake up timer again by calling userspace syscall such
as ax25_sendmsg(), ax25_connect() and ax25_ioctl().
This unexpected waked handler, sp_xmit_on_air(), realizes nothing about
the undergoing cleanup and may still call pty_write() to use driver layer
resources that have already been released.
One of the possible race conditions is shown below:
(USE) | (FREE)
ax25_sendmsg() |
ax25_queue_xmit() |
... |
sp_xmit() |
sp_encaps() | sixpack_close()
sp_xmit_on_air() | del_timer_sync(&sp->tx_t)
mod_timer(&sp->tx_t,...) | ...
| unregister_netdev()
| ...
(wait a while) | tty_release()
| tty_release_struct()
| release_tty()
sp_xmit_on_air() | tty_kref_put(tty_struct) //FREE
pty_write(tty_struct) //USE | ...
The corresponding fail log is shown below:
===============================================================
BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470
Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0
...
Call Trace:
...
queue_work_on+0x3f/0x50
pty_write+0xcd/0xe0pty_write+0xcd/0xe0
sp_xmit_on_air+0xb2/0x1f0
call_timer_fn+0x28/0x150
__run_timers.part.0+0x3c2/0x470
run_timer_softirq+0x3b/0x80
__do_softirq+0xf1/0x380
...
This patch reorders the del_timer_sync() after the unregister_netdev()
to avoid UAF bugs. Because the unregister_netdev() is well synchronized,
it flushs out any pending queues, waits the refcount of net_device
decreases to zero and removes net_device from kernel. There is not any
running routines after executing unregister_netdev(). Therefore, we could
not arouse timer from userspace again.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xfpregs_set() handles 32-bit REGSET_XFP and 64-bit REGSET_FP. The actual
code treats these regsets as modern FX state (i.e. the beginning part of
XSTATE). The declarations of the regsets thought they were the legacy
i387 format. The code thought they were the 32-bit (no xmm8..15) variant
of XSTATE and, for good measure, made the high bits disappear by zeroing
the wrong part of the buffer. The latter broke ptrace, and everything
else confused anyone trying to understand the code. In particular, the
nonsense definitions of the regsets confused me when I wrote this code.
Clean this all up. Change the declarations to match reality (which
shouldn't change the generated code, let alone the ABI) and fix
xfpregs_set() to clear the correct bits and to only do so for 32-bit
callers.
Fixes: 6164331d15f7 ("x86/fpu: Rewrite xfpregs_set()")
Reported-by: Luís Ferreira <contact@lsferreira.net>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215524
Link: https://lore.kernel.org/r/YgpFnZpF01WwR8wU@zn.tnic
|
|
DSL and CM (Cable Modem) support 8 B max transfer size and have a custom
DT binding for that reason. This driver was checking for a wrong
"compatible" however which resulted in an incorrect setup.
Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to ftrace, exec, and seccomp tests build, run-time and install
bugs. These bugs are in the way of running the tests"
* tag 'linux-kselftest-fixes-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Do not trace do_softirq because of PREEMPT_RT
selftests/seccomp: Fix seccomp failure by adding missing headers
selftests/exec: Add non-regular to TEST_GEN_PROGS
|
|
elfcorehdr_addr is fixed address passed to Second kernel which may be conflicted
with potential reserved memory in Second kernel,so fdt_reserve_elfcorehdr() ahead
of fdt_init_reserved_mem() can relieve this situation.
Signed-off-by: Nikhil Gupta <nikhil.gupta@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220128042321.15228-1-nikhil.gupta@nxp.com
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes for rc5, nothing really stands out, mostly some amdgpu
and i915 fixes with mediatek, radeon and some misc fixes.
cma-helper:
- set VM_DONTEXPAND
atomic:
- error handling fix
mediatek:
- fix probe defer loop with external bridge
amdgpu:
- Stable pstate clock fixes for Dimgrey Cavefish and Beige Goby
- S0ix SDMA fix
- Yellow Carp GPU reset fix
radeon:
- Backlight fix for iMac 12,1
i915:
- GVT kerneldoc cleanup.
- GVT Kconfig should depend on X86
- Prevent out of range access in SWSCI display code
- Fix mbus join and dbuf slice config lookup
- Fix inverted priority selection in the TTM backend
- Fix FBC plane end Y offset check"
* tag 'drm-fixes-2022-02-18' of git://anongit.freedesktop.org/drm/drm:
drm/atomic: Don't pollute crtc_state->mode_blob with error pointers
drm/radeon: Fix backlight control on iMac 12,1
drm/amd/pm: correct the sequence of sending gpu reset msg
drm/amdgpu: skipping SDMA hw_init and hw_fini for S0ix.
drm/amd/pm: correct UMD pstate clocks for Dimgrey Cavefish and Beige Goby
drm/i915/fbc: Fix the plane end Y offset check
drm/i915/opregion: check port number bounds for SWSCI display power state
drm/i915/ttm: tweak priority hint selection
drm/i915: Fix mbus join config lookup
drm/i915: Fix dbuf slice config lookup
drm/cma-helper: Set VM_DONTEXPAND for mmap
drm/mediatek: mtk_dsi: Avoid EPROBE_DEFER loop with external bridge
drm/i915/gvt: Make DRM_I915_GVT depend on X86
drm/i915/gvt: clean up kernel-doc in gtt.c
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2022-02-17
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).
The main changes are:
1) Add schedule points in map batch ops, from Eric.
2) Fix bpf_msg_push_data with len 0, from Felix.
3) Fix crash due to incorrect copy_map_value, from Kumar.
4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.
5) Fix a bpf_timer initialization issue with clang, from Yonghong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add schedule points in batch ops
bpf: Fix crash due to out of bounds access into reg2btf_ids.
selftests: bpf: Check bpf_msg_push_data return value
bpf: Fix a bpf_timer initialization issue
bpf: Emit bpf_timer in vmlinux BTF
selftests/bpf: Add test for bpf_timer overwriting crash
bpf: Fix crash due to incorrect copy_map_value
bpf: Do not try bpf_msg_push_data with len 0
====================
Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- GVT kerneldoc cleanup. (Randy Dunlap)
- GVT Kconfig should depend on X86. (Siva Mullati)
- Prevent out of range access in SWSCI display code. (Jani Nikula)
- Fix mbus join and dbuf slice config lookup. (Ville Syrjälä)
- Fix inverted priority selection in the TTM backend. (Matthew Auld)
- Fix FBC plane end Y offset check. (Ville Syrjälä)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4lA6k8+xp8u3aB@tursulin-mobl2
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm/cma-helper: Set VM_DONTEXPAND
* drm/atomic: Fix error handling in drm_atomic_set_mode_for_crtc()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4mzQALMX69UmA3@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
Current release - regressions:
- dsa: lantiq_gswip: fix use after free in gswip_remove()
- smc: avoid overwriting the copies of clcsock callback functions
Current release - new code bugs:
- iwlwifi:
- fix use-after-free when no FW is present
- mei: fix the pskb_may_pull check in ipv4
- mei: retry mapping the shared area
- mvm: don't feed the hardware RFKILL into iwlmei
Previous releases - regressions:
- ipv6: mcast: use rcu-safe version of ipv6_get_lladdr()
- tipc: fix wrong publisher node address in link publications
- iwlwifi: mvm: don't send SAR GEO command for 3160 devices, avoid FW
assertion
- bgmac: make idm and nicpm resource optional again
- atl1c: fix tx timeout after link flap
Previous releases - always broken:
- vsock: remove vsock from connected table when connect is
interrupted by a signal
- ping: change destination interface checks to match raw sockets
- crypto: af_alg - get rid of alg_memory_allocated to avoid confusing
semantics (and null-deref) after SO_RESERVE_MEM was added
- ipv6: make exclusive flowlabel checks per-netns
- bonding: force carrier update when releasing slave
- sched: limit TC_ACT_REPEAT loops
- bridge: multicast: notify switchdev driver whenever MC processing
gets disabled because of max entries reached
- wifi: brcmfmac: fix crash in brcm_alt_fw_path when WLAN not found
- iwlwifi: fix locking when "HW not ready"
- phy: mediatek: remove PHY mode check on MT7531
- dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN
- dsa: lan9303:
- fix polarity of reset during probe
- fix accelerated VLAN handling"
* tag 'net-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
bonding: force carrier update when releasing slave
nfp: flower: netdev offload check for ip6gretap
ipv6: fix data-race in fib6_info_hw_flags_set / fib6_purge_rt
ipv4: fix data races in fib_alias_hw_flags_set
net: dsa: lan9303: add VLAN IDs to master device
net: dsa: lan9303: handle hwaccel VLAN tags
vsock: remove vsock from connected table when connect is interrupted by a signal
Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"
ping: fix the dif and sdif check in ping_lookup
net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
net: sched: limit TC_ACT_REPEAT loops
tipc: fix wrong notification node addresses
net: dsa: lantiq_gswip: fix use after free in gswip_remove()
ipv6: per-netns exclusive flowlabel checks
net: bridge: multicast: notify switchdev driver whenever MC processing gets disabled
CDC-NCM: avoid overflow in sanity checking
mctp: fix use after free
net: mscc: ocelot: fix use-after-free in ocelot_vlan_del()
bonding: fix data-races around agg_select_timer
dpaa2-eth: Initialize mutex used in one step timestamping path
...
|
|
In __bond_release_one(), bond_set_carrier() is only called when bond
device has no slave. Therefore, if we remove the up slave from a master
with two slaves and keep the down slave, the master will remain up.
Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond))
statement.
Reproducer:
$ insmod bonding.ko mode=0 miimon=100 max_bonds=2
$ ifconfig bond0 up
$ ifenslave bond0 eth0 eth1
$ ifconfig eth0 down
$ ifenslave -d bond0 eth1
$ cat /proc/net/bonding/bond0
Fixes: ff59c4563a8d ("[PATCH] bonding: support carrier state for master")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported various soft lockups caused by bpf batch operations.
INFO: task kworker/1:1:27 blocked for more than 140 seconds.
INFO: task hung in rcu_barrier
Nothing prevents batch ops to process huge amount of data,
we need to add schedule points in them.
Note that maybe_wait_bpf_programs(map) calls from
generic_map_delete_batch() can be factorized by moving
the call after the loop.
This will be done later in -next tree once we get this fix merged,
unless there is strong opinion doing this optimization sooner.
Fixes: aa2e93b8e58e ("bpf: Add generic support for update and delete batch ops")
Fixes: cb4d03ab499d ("bpf: Add generic support for lookup batch op")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/bpf/20220217181902.808742-1-eric.dumazet@gmail.com
|
|
The SGX reclaimer code lacks page poison handling in its main
free path. This can lead to avoidable machine checks if a
poisoned page is freed and reallocated instead of being
isolated.
A troublesome scenario is:
1. Machine check (#MC) occurs (asynchronous, !MF_ACTION_REQUIRED)
2. arch_memory_failure() is eventually called
3. (SGX) page->poison set to 1
4. Page is reclaimed
5. Page added to normal free lists by sgx_reclaim_pages()
^ This is the bug (poison pages should be isolated on the
sgx_poison_page_list instead)
6. Page is reallocated by some innocent enclave, a second (synchronous)
in-kernel #MC is induced, probably during EADD instruction.
^ This is the fallout from the bug
(6) is unfortunate and can be avoided by replacing the open coded
enclave page freeing code in the reclaimer with sgx_free_epc_page()
to obtain support for poison page handling that includes placing the
poisoned page on the correct list.
Fixes: d6d261bded8a ("x86/sgx: Add new sgx_epc_page flag bit to mark free pages")
Fixes: 992801ae9243 ("x86/sgx: Initial poison handling for dirty and free pages")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/dcc95eb2aaefb042527ac50d0a50738c7c160dac.1643830353.git.reinette.chatre@intel.com
|
|
Commit b42bc9a3c511 ("Fix regression due to "fs: move binfmt_misc sysctl
to its own file") fixed a regression, however it failed to add a
kmemleak_not_leak().
Fixes: b42bc9a3c511 ("Fix regression due to "fs: move binfmt_misc sysctl to its own file")
Reported-by: Tong Zhang <ztong0001@gmail.com>
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix corrupt inject files when only last branch option is enabled with
ARM CoreSight ETM
- Fix use-after-free for realloc(..., 0) in libsubcmd, found by gcc 12
- Defer freeing string after possible strlen() on it in the BPF loader,
found by gcc 12
- Avoid early exit in 'perf trace' due SIGCHLD from non-workload
processes
- Fix arm64 perf_event_attr 'perf test's wrt --call-graph
initialization
- Fix libperf 32-bit build for 'perf test' wrt uint64_t printf
- Fix perf_cpu_map__for_each_cpu macro in libperf, providing access to
the CPU iterator
- Sync linux/perf_event.h UAPI with the kernel sources
- Update Jiri Olsa's email address in MAINTAINERS
* tag 'perf-tools-fixes-for-v5.17-2022-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bpf: Defer freeing string after possible strlen() on it
perf test: Fix arm64 perf_event_attr tests wrt --call-graph initialization
libsubcmd: Fix use-after-free for realloc(..., 0)
libperf: Fix perf_cpu_map__for_each_cpu macro
perf cs-etm: Fix corrupt inject files when only last branch option is enabled
perf cs-etm: No-op refactor of synth opt usage
libperf: Fix 32-bit build for tests uint64_t printf
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
perf trace: Avoid early exit due SIGCHLD from non-workload processes
MAINTAINERS: Update Jiri's email address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module fix from Luis Chamberlain:
"Fixes module decompression when CONFIG_SYSFS=n
The only fix trickled down for v5.17-rc cycle so far is the fix for
module decompression when CONFIG_SYSFS=n. This was reported through
0-day"
* tag 'modules-5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: fix building with sysfs disabled
|
|
IPv6 GRE tunnels are not being offloaded, this is caused by a missing
netdev offload check. The functionality of IPv6 GRE tunnel offloading
was previously added but this check was not included. Adding the
ip6gretap check allows IPv6 GRE tunnels to be offloaded correctly.
Fixes: f7536ffb0986 ("nfp: flower: Allow ipv6gretap interface for offloading")
Signed-off-by: Danie du Toit <danie.dutoit@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220217124820.40436-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because fib6_info_hw_flags_set() is called without any synchronization,
all accesses to gi6->offload, fi->trap and fi->offload_failed
need some basic protection like READ_ONCE()/WRITE_ONCE().
BUG: KCSAN: data-race in fib6_info_hw_flags_set / fib6_purge_rt
read to 0xffff8881087d5886 of 1 bytes by task 13953 on cpu 0:
fib6_drop_pcpu_from net/ipv6/ip6_fib.c:1007 [inline]
fib6_purge_rt+0x4f/0x580 net/ipv6/ip6_fib.c:1033
fib6_del_route net/ipv6/ip6_fib.c:1983 [inline]
fib6_del+0x696/0x890 net/ipv6/ip6_fib.c:2028
__ip6_del_rt net/ipv6/route.c:3876 [inline]
ip6_del_rt+0x83/0x140 net/ipv6/route.c:3891
__ipv6_dev_ac_dec+0x2b5/0x370 net/ipv6/anycast.c:374
ipv6_dev_ac_dec net/ipv6/anycast.c:387 [inline]
__ipv6_sock_ac_close+0x141/0x200 net/ipv6/anycast.c:207
ipv6_sock_ac_close+0x79/0x90 net/ipv6/anycast.c:220
inet6_release+0x32/0x50 net/ipv6/af_inet6.c:476
__sock_release net/socket.c:650 [inline]
sock_close+0x6c/0x150 net/socket.c:1318
__fput+0x295/0x520 fs/file_table.c:280
____fput+0x11/0x20 fs/file_table.c:313
task_work_run+0x8e/0x110 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop kernel/entry/common.c:175 [inline]
exit_to_user_mode_prepare+0x160/0x190 kernel/entry/common.c:207
__syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300
do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x44/0xae
write to 0xffff8881087d5886 of 1 bytes by task 1912 on cpu 1:
fib6_info_hw_flags_set+0x155/0x3b0 net/ipv6/route.c:6230
nsim_fib6_rt_hw_flags_set drivers/net/netdevsim/fib.c:668 [inline]
nsim_fib6_rt_add drivers/net/netdevsim/fib.c:691 [inline]
nsim_fib6_rt_insert drivers/net/netdevsim/fib.c:756 [inline]
nsim_fib6_event drivers/net/netdevsim/fib.c:853 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:886 [inline]
nsim_fib_event_work+0x284f/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x2c7/0x2e0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30
value changed: 0x22 -> 0x2a
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 1912 Comm: kworker/1:3 Not tainted 5.16.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work
Fixes: 0c5fcf9e249e ("IPv6: Add "offload failed" indication to routes")
Fixes: bb3c4ab93e44 ("ipv6: Add "offload" and "trap" indications to routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Amit Cohen <amcohen@nvidia.com>
Cc: Ido Schimmel <idosch@nvidia.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220216173217.3792411-2-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
fib_alias_hw_flags_set() can be used by concurrent threads,
and is only RCU protected.
We need to annotate accesses to following fields of struct fib_alias:
offload, trap, offload_failed
Because of READ_ONCE()WRITE_ONCE() limitations, make these
field u8.
BUG: KCSAN: data-race in fib_alias_hw_flags_set / fib_alias_hw_flags_set
read to 0xffff888134224a6a of 1 bytes by task 2013 on cpu 1:
fib_alias_hw_flags_set+0x28a/0x470 net/ipv4/fib_trie.c:1050
nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
process_scheduled_works kernel/workqueue.c:2370 [inline]
worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
write to 0xffff888134224a6a of 1 bytes by task 4872 on cpu 0:
fib_alias_hw_flags_set+0x2d5/0x470 net/ipv4/fib_trie.c:1054
nsim_fib4_rt_hw_flags_set drivers/net/netdevsim/fib.c:350 [inline]
nsim_fib4_rt_add drivers/net/netdevsim/fib.c:367 [inline]
nsim_fib4_rt_insert drivers/net/netdevsim/fib.c:429 [inline]
nsim_fib4_event drivers/net/netdevsim/fib.c:461 [inline]
nsim_fib_event drivers/net/netdevsim/fib.c:881 [inline]
nsim_fib_event_work+0x1852/0x2cf0 drivers/net/netdevsim/fib.c:1477
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
process_scheduled_works kernel/workqueue.c:2370 [inline]
worker_thread+0x7df/0xa70 kernel/workqueue.c:2456
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
value changed: 0x00 -> 0x02
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4872 Comm: kworker/0:0 Not tainted 5.17.0-rc3-syzkaller-00188-g1d41d2e82623-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events nsim_fib_event_work
Fixes: 90b93f1b31f8 ("ipv4: Add "offload" and "trap" indications to routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220216173217.3792411-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the master device does VLAN filtering, the IDs used by the switch
must be added for any frames to be received. Do this in the
port_enable() function, and remove them in port_disable().
Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220216204818.28746-1-mans@mansr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check for a hwaccel VLAN tag on rx and use it if present. Otherwise,
use __skb_vlan_pop() like the other tag parsers do. This fixes the case
where the VLAN tag has already been consumed by the master.
Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Mans Rullgard <mans@mansr.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220216124634.23123-1-mans@mansr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:
"All the details are in the bug, but the bottom line is that somehow,
this patch causes corruption when the numa balancing feature is
enabled AND we don't use process affinity AND we use GUP to pin pages
so our accelerator can DMA to/from system memory.
Either disabling numa balancing, using process affinity to bind to
specific numa-node or reverting this patch causes the bug to
disappear"
and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page()
simplification").
Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW. But it appears it
does. Suspicious.
However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical. It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.
The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.
Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.
Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information). Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.
The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless.
Fixes: 09854ba94c6a ("mm: do_wp_page() simplification")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215616
Link: https://lore.kernel.org/all/CAFCwf10eNmwq2wD71xjUhqkvv5+_pJMR1nPug2RqNDcFT4H86Q@mail.gmail.com/
Reported-and-tested-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
vsock_connect() expects that the socket could already be in the
TCP_ESTABLISHED state when the connecting task wakes up with a signal
pending. If this happens the socket will be in the connected table, and
it is not removed when the socket state is reset. In this situation it's
common for the process to retry connect(), and if the connection is
successful the socket will be added to the connected table a second
time, corrupting the list.
Prevent this by calling vsock_remove_connected() if a signal is received
while waiting for a connection. This is harmless if the socket is not in
the connected table, and if it is in the table then removing it will
prevent list corruption from a double add.
Note for backporting: this patch requires d5afa82c977e ("vsock: correct
removal of socket from the list"), which is in all current stable trees
except 4.9.y.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 3710e80952cf2dc48257ac9f145b117b5f74e0a5.
Since idm_base and nicpm_base are still optional resources not present
on all platforms, this breaks the driver for everything except Northstar
2 (which has both).
The same change was already reverted once with 755f5738ff98 ("net:
broadcom: fix a mistake about ioremap resource").
So let's do it again.
Fixes: 3710e80952cf ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
[florian: Added comments to explain the resources are optional]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While examining is_ucounts_overlimit and reading the various messages
I realized that is_ucounts_overlimit fails to deal with counts that
may have wrapped.
Being wrapped should be a transitory state for counts and they should
never be wrapped for long, but it can happen so handle it.
Cc: stable@vger.kernel.org
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Link: https://lkml.kernel.org/r/20220216155832.680775-5-ebiederm@xmission.com
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
During set*id() which cred->ucounts to charge the the current process
to is not known until after set_cred_ucounts. So move the
RLIMIT_NPROC checking into a new helper flag_nproc_exceeded and call
flag_nproc_exceeded after set_cred_ucounts.
This is very much an arbitrary subset of the places where we currently
change the RLIMIT_NPROC accounting, designed to preserve the existing
logic.
Fixing the existing logic will be the subject of another series of
changes.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220216155832.680775-4-ebiederm@xmission.com
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Michal Koutný <mkoutny@suse.com> wrote:
> Tasks are associated to multiple users at once. Historically and as per
> setrlimit(2) RLIMIT_NPROC is enforce based on real user ID.
>
> The commit 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
> made the accounting structure "indexed" by euid and hence potentially
> account tasks differently.
>
> The effective user ID may be different e.g. for setuid programs but
> those are exec'd into already existing task (i.e. below limit), so
> different accounting is moot.
>
> Some special setresuid(2) users may notice the difference, justifying
> this fix.
I looked at cred->ucount and it is only used for rlimit operations
that were previously stored in cred->user. Making the fact
cred->ucount can refer to a different user from cred->user a bug,
affecting all uses of cred->ulimit not just RLIMIT_NPROC.
Fix set_cred_ucounts to always use the real uid not the effective uid.
Further simplify set_cred_ucounts by noticing that set_cred_ucounts
somehow retained a draft version of the check to see if alloc_ucounts
was needed that checks the new->user and new->user_ns against the
current_real_cred(). Remove that draft version of the check.
All that matters for setting the cred->ucounts are the user_ns and uid
fields in the cred.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220207121800.5079-4-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220216155832.680775-3-ebiederm@xmission.com
Reported-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Michal Koutný <mkoutny@suse.com> wrote:
> It was reported that v5.14 behaves differently when enforcing
> RLIMIT_NPROC limit, namely, it allows one more task than previously.
> This is consequence of the commit 21d1c5e386bc ("Reimplement
> RLIMIT_NPROC on top of ucounts") that missed the sharpness of
> equality in the forking path.
This can be fixed either by fixing the test or by moving the increment
to be before the test. Fix it my moving copy_creds which contains
the increment before is_ucounts_overlimit.
In the case of CLONE_NEWUSER the ucounts in the task_cred changes.
The function is_ucounts_overlimit needs to use the final version of
the ucounts for the new process. Which means moving the
is_ucounts_overlimit test after copy_creds is necessary.
Both the test in fork and the test in set_user were semantically
changed when the code moved to ucounts. The change of the test in
fork was bad because it was before the increment. The test in
set_user was wrong and the change to ucounts fixed it. So this
fix only restores the old behavior in one lcation not two.
Link: https://lkml.kernel.org/r/20220204181144.24462-1-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220216155832.680775-2-ebiederm@xmission.com
Cc: stable@vger.kernel.org
Reported-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
set_user
Solar Designer <solar@openwall.com> wrote:
> I'm not aware of anyone actually running into this issue and reporting
> it. The systems that I personally know use suexec along with rlimits
> still run older/distro kernels, so would not yet be affected.
>
> So my mention was based on my understanding of how suexec works, and
> code review. Specifically, Apache httpd has the setting RLimitNPROC,
> which makes it set RLIMIT_NPROC:
>
> https://httpd.apache.org/docs/2.4/mod/core.html#rlimitnproc
>
> The above documentation for it includes:
>
> "This applies to processes forked from Apache httpd children servicing
> requests, not the Apache httpd children themselves. This includes CGI
> scripts and SSI exec commands, but not any processes forked from the
> Apache httpd parent, such as piped logs."
>
> In code, there are:
>
> ./modules/generators/mod_cgid.c: ( (cgid_req.limits.limit_nproc_set) && ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/generators/mod_cgi.c: ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/filters/mod_ext_filter.c: rv = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC, conf->limit_nproc);
>
> For example, in mod_cgi.c this is in run_cgi_child().
>
> I think this means an httpd child sets RLIMIT_NPROC shortly before it
> execs suexec, which is a SUID root program. suexec then switches to the
> target user and execs the CGI script.
>
> Before 2863643fb8b9, the setuid() in suexec would set the flag, and the
> target user's process count would be checked against RLIMIT_NPROC on
> execve(). After 2863643fb8b9, the setuid() in suexec wouldn't set the
> flag because setuid() is (naturally) called when the process is still
> running as root (thus, has those limits bypass capabilities), and
> accordingly execve() would not check the target user's process count
> against RLIMIT_NPROC.
In commit 2863643fb8b9 ("set_user: add capability check when
rlimit(RLIMIT_NPROC) exceeds") capable calls were added to set_user to
make it more consistent with fork. Unfortunately because of call site
differences those capable calls were checking the credentials of the
user before set*id() instead of after set*id().
This breaks enforcement of RLIMIT_NPROC for applications that set the
rlimit and then call set*id() while holding a full set of
capabilities. The capabilities are only changed in the new credential
in security_task_fix_setuid().
The code in apache suexec appears to follow this pattern.
Commit 909cc4ae86f3 ("[PATCH] Fix two bugs with process limits
(RLIMIT_NPROC)") where this check was added describes the targes of this
capability check as:
2/ When a root-owned process (e.g. cgiwrap) sets up process limits and then
calls setuid, the setuid should fail if the user would then be running
more than rlim_cur[RLIMIT_NPROC] processes, but it doesn't. This patch
adds an appropriate test. With this patch, and per-user process limit
imposed in cgiwrap really works.
So the original use case of this check also appears to match the broken
pattern.
Restore the enforcement of RLIMIT_NPROC by removing the bad capable
checks added in set_user. This unfortunately restores the
inconsistent state the code has been in for the last 11 years, but
dealing with the inconsistencies looks like a larger problem.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20210907213042.GA22626@openwall.com/
Link: https://lkml.kernel.org/r/20220212221412.GA29214@openwall.com
Link: https://lkml.kernel.org/r/20220216155832.680775-1-ebiederm@xmission.com
Fixes: 2863643fb8b9 ("set_user: add capability check when rlimit(RLIMIT_NPROC) exceeds")
History-Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reviewed-by: Solar Designer <solar@openwall.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
When 'ping' changes to use PING socket instead of RAW socket by:
# sysctl -w net.ipv4.ping_group_range="0 100"
There is another regression caused when matching sk_bound_dev_if
and dif, RAW socket is using inet_iif() while PING socket lookup
is using skb->dev->ifindex, the cmd below fails due to this:
# ip link add dummy0 type dummy
# ip link set dummy0 up
# ip addr add 192.168.111.1/24 dev dummy0
# ping -I dummy0 192.168.111.1 -c1
The issue was also reported on:
https://github.com/iputils/iputils/issues/104
But fixed in iputils in a wrong way by not binding to device when
destination IP is on device, and it will cause some of kselftests
to fail, as Jianlin noticed.
This patch is to use inet(6)_iif and inet(6)_sdif to get dif and
sdif for PING socket, and keep consistent with RAW socket.
Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
