| Age | Commit message (Collapse) | Author |
|---|
|
In some very rare cases the init flow may fail. In many cases, this is
recoverable, so we can retry. Implement a loop to retry two more times
after the first attempt failed.
This can happen in two different situations, namely during probe and
during mac80211 start. For the first case, a simple loop is enough.
For the second case, we need to add a flag to prevent mac80211 from
trying to restart it as well, leaving full control with the driver.
Cc: <stable@vger.kernel.org>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211110150132.57514296ecab.I52a0411774b700bdc7dedb124d8b59bf99456eb2@changeid
|
|
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'ret'.
Eliminate the follow smatch warning:
drivers/net/wireless/intel/iwlwifi/pcie/drv.c:1376 iwl_pci_probe() warn:
missing error code 'ret'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 1f171f4f1437 ("iwlwifi: Add support for getting rf id with blank otp")
Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635838727-128735-1-git-send-email-jiapeng.chong@linux.alibaba.com
|
|
Both gcc-11 and clang point out a potential issue with integer overflow when
the iwl_dev_info_table[] array is empty. This is what clang warns:
drivers/net/wireless/intel/iwlwifi/pcie/drv.c:1344:42: error: implicit conversion from 'unsigned long' to 'int' changes value from 18446744073709551615 to -1 [-Werror,-Wconstant-conversion]
for (i = ARRAY_SIZE(iwl_dev_info_table) - 1; i >= 0; i--) {
~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~
This is still harmless, as the loop correctly terminates, but adding
an extra range check makes that obvious to both readers and to the
compiler.
Fixes: 3f7320428fa4 ("iwlwifi: pcie: simplify iwl_pci_find_dev_info()")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211118142124.526901-1-arnd@kernel.org
|
|
If you happened to try to access `/dev/drm_dp_aux` devices provided by
the MSM DP AUX driver too early at bootup you could go boom. Let's
avoid that by only allowing AUX transfers when the controller is
powered up.
Specifically the crash that was seen (on Chrome OS 5.4 tree with
relevant backports):
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 0 PID: 3131 Comm: fwupd Not tainted 5.4.144-16620-g28af11b73efb #1
Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
Call trace:
dump_backtrace+0x0/0x14c
show_stack+0x20/0x2c
dump_stack+0xac/0x124
panic+0x150/0x390
nmi_panic+0x80/0x94
arm64_serror_panic+0x78/0x84
do_serror+0x0/0x118
do_serror+0xa4/0x118
el1_error+0xbc/0x160
dp_catalog_aux_write_data+0x1c/0x3c
dp_aux_cmd_fifo_tx+0xf0/0x1b0
dp_aux_transfer+0x1b0/0x2bc
drm_dp_dpcd_access+0x8c/0x11c
drm_dp_dpcd_read+0x64/0x10c
auxdev_read_iter+0xd4/0x1c4
I did a little bit of tracing and found that:
* We register the AUX device very early at bootup.
* Power isn't actually turned on for my system until
hpd_event_thread() -> dp_display_host_init() -> dp_power_init()
* You can see that dp_power_init() calls dp_aux_init() which is where
we start allowing AUX channel requests to go through.
In general this patch is a bit of a bandaid but at least it gets us
out of the current state where userspace acting at the wrong time can
fully crash the system.
* I think the more proper fix (which requires quite a bit more
changes) is to power stuff on while an AUX transfer is
happening. This is like the solution we did for ti-sn65dsi86. This
might be required for us to move to populating the panel via the
DP-AUX bus.
* Another fix considered was to dynamically register / unregister. I
tried that at <https://crrev.com/c/3169431/3> but it got
ugly. Currently there's a bug where the pm_runtime() state isn't
tracked properly and that causes us to just keep registering more
and more.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211109100403.1.I4e23470d681f7efe37e2e7f1a6466e15e9bb1d72@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
If "data_lanes" property of the dsi output endpoint is missing in
the DT, num_data_lanes would be 0 by default, which could cause
dsi_host_attach() to fail if dsi->lanes is set to a non-zero value
by the bridge driver.
According to the binding document of msm dsi controller, the
input/output endpoint of the controller is expected to have 4 lanes.
So let's set num_data_lanes to 4 by default.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211030100812.1.I6cd9af36b723fed277d34539d3b2ba4ca233ad2d@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Ice driver has the routines for managing XDP resources that are shared
between ndo_bpf op and VSI rebuild flow. The latter takes place for
example when user changes queue count on an interface via ethtool's
set_channels().
There is an issue around the bpf_prog refcounting when VSI is being
rebuilt - since ice_prepare_xdp_rings() is called with vsi->xdp_prog as
an argument that is used later on by ice_vsi_assign_bpf_prog(), same
bpf_prog pointers are swapped with each other. Then it is also
interpreted as an 'old_prog' which in turn causes us to call
bpf_prog_put on it that will decrement its refcount.
Below splat can be interpreted in a way that due to zero refcount of a
bpf_prog it is wiped out from the system while kernel still tries to
refer to it:
[ 481.069429] BUG: unable to handle page fault for address: ffffc9000640f038
[ 481.077390] #PF: supervisor read access in kernel mode
[ 481.083335] #PF: error_code(0x0000) - not-present page
[ 481.089276] PGD 100000067 P4D 100000067 PUD 1001cb067 PMD 106d2b067 PTE 0
[ 481.097141] Oops: 0000 [#1] PREEMPT SMP PTI
[ 481.101980] CPU: 12 PID: 3339 Comm: sudo Tainted: G OE 5.15.0-rc5+ #1
[ 481.110840] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016
[ 481.122021] RIP: 0010:dev_xdp_prog_id+0x25/0x40
[ 481.127265] Code: 80 00 00 00 00 0f 1f 44 00 00 89 f6 48 c1 e6 04 48 01 fe 48 8b 86 98 08 00 00 48 85 c0 74 13 48 8b 50 18 31 c0 48 85 d2 74 07 <48> 8b 42 38 8b 40 20 c3 48 8b 96 90 08 00 00 eb e8 66 2e 0f 1f 84
[ 481.148991] RSP: 0018:ffffc90007b63868 EFLAGS: 00010286
[ 481.155034] RAX: 0000000000000000 RBX: ffff889080824000 RCX: 0000000000000000
[ 481.163278] RDX: ffffc9000640f000 RSI: ffff889080824010 RDI: ffff889080824000
[ 481.171527] RBP: ffff888107af7d00 R08: 0000000000000000 R09: ffff88810db5f6e0
[ 481.179776] R10: 0000000000000000 R11: ffff8890885b9988 R12: ffff88810db5f4bc
[ 481.188026] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 481.196276] FS: 00007f5466d5bec0(0000) GS:ffff88903fb00000(0000) knlGS:0000000000000000
[ 481.205633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 481.212279] CR2: ffffc9000640f038 CR3: 000000014429c006 CR4: 00000000003706e0
[ 481.220530] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 481.228771] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 481.237029] Call Trace:
[ 481.239856] rtnl_fill_ifinfo+0x768/0x12e0
[ 481.244602] rtnl_dump_ifinfo+0x525/0x650
[ 481.249246] ? __alloc_skb+0xa5/0x280
[ 481.253484] netlink_dump+0x168/0x3c0
[ 481.257725] netlink_recvmsg+0x21e/0x3e0
[ 481.262263] ____sys_recvmsg+0x87/0x170
[ 481.266707] ? __might_fault+0x20/0x30
[ 481.271046] ? _copy_from_user+0x66/0xa0
[ 481.275591] ? iovec_from_user+0xf6/0x1c0
[ 481.280226] ___sys_recvmsg+0x82/0x100
[ 481.284566] ? sock_sendmsg+0x5e/0x60
[ 481.288791] ? __sys_sendto+0xee/0x150
[ 481.293129] __sys_recvmsg+0x56/0xa0
[ 481.297267] do_syscall_64+0x3b/0xc0
[ 481.301395] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 481.307238] RIP: 0033:0x7f5466f39617
[ 481.311373] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb bd 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2f 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 481.342944] RSP: 002b:00007ffedc7f4308 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
[ 481.361783] RAX: ffffffffffffffda RBX: 00007ffedc7f5460 RCX: 00007f5466f39617
[ 481.380278] RDX: 0000000000000000 RSI: 00007ffedc7f5360 RDI: 0000000000000003
[ 481.398500] RBP: 00007ffedc7f53f0 R08: 0000000000000000 R09: 000055d556f04d50
[ 481.416463] R10: 0000000000000077 R11: 0000000000000246 R12: 00007ffedc7f5360
[ 481.434131] R13: 00007ffedc7f5350 R14: 00007ffedc7f5344 R15: 0000000000000e98
[ 481.451520] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mxm_wmi mei_me coretemp mei ipmi_si ipmi_msghandler wmi acpi_pad acpi_power_meter ip_tables x_tables autofs4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel ahci crypto_simd cryptd libahci lpc_ich [last unloaded: ice]
[ 481.528558] CR2: ffffc9000640f038
[ 481.542041] ---[ end trace d1f24c9ecf5b61c1 ]---
Fix this by only calling ice_vsi_assign_bpf_prog() inside
ice_prepare_xdp_rings() when current vsi->xdp_prog pointer is NULL.
This way set_channels() flow will not attempt to swap the vsi->xdp_prog
pointers with itself.
Also, sprinkle around some comments that provide a reasoning about
correlation between driver and kernel in terms of bpf_prog refcount.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Marta Plantykow <marta.a.plantykow@intel.com>
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The approach of having XDP queue per CPU regardless of user's setting
exposed a hidden bug that could occur in case when Rx queue count differ
from Tx queue count. Currently vsi->txq_map's size is equal to the
doubled vsi->alloc_txq, which is not correct due to the fact that XDP
rings were previously based on the Rx queue count. Below splat can be
seen when ethtool -L is used and XDP rings are configured:
[ 682.875339] BUG: kernel NULL pointer dereference, address: 000000000000000f
[ 682.883403] #PF: supervisor read access in kernel mode
[ 682.889345] #PF: error_code(0x0000) - not-present page
[ 682.895289] PGD 0 P4D 0
[ 682.898218] Oops: 0000 [#1] PREEMPT SMP PTI
[ 682.903055] CPU: 42 PID: 2878 Comm: ethtool Tainted: G OE 5.15.0-rc5+ #1
[ 682.912214] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016
[ 682.923380] RIP: 0010:devres_remove+0x44/0x130
[ 682.928527] Code: 49 89 f4 55 48 89 fd 4c 89 ff 53 48 83 ec 10 e8 92 b9 49 00 48 8b 9d a8 02 00 00 48 8d 8d a0 02 00 00 49 89 c2 48 39 cb 74 0f <4c> 3b 63 10 74 25 48 8b 5b 08 48 39 cb 75 f1 4c 89 ff 4c 89 d6 e8
[ 682.950237] RSP: 0018:ffffc90006a679f0 EFLAGS: 00010002
[ 682.956285] RAX: 0000000000000286 RBX: ffffffffffffffff RCX: ffff88908343a370
[ 682.964538] RDX: 0000000000000001 RSI: ffffffff81690d60 RDI: 0000000000000000
[ 682.972789] RBP: ffff88908343a0d0 R08: 0000000000000000 R09: 0000000000000000
[ 682.981040] R10: 0000000000000286 R11: 3fffffffffffffff R12: ffffffff81690d60
[ 682.989282] R13: ffffffff81690a00 R14: ffff8890819807a8 R15: ffff88908343a36c
[ 682.997535] FS: 00007f08c7bfa740(0000) GS:ffff88a03fd00000(0000) knlGS:0000000000000000
[ 683.006910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 683.013557] CR2: 000000000000000f CR3: 0000001080a66003 CR4: 00000000003706e0
[ 683.021819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 683.030075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 683.038336] Call Trace:
[ 683.041167] devm_kfree+0x33/0x50
[ 683.045004] ice_vsi_free_arrays+0x5e/0xc0 [ice]
[ 683.050380] ice_vsi_rebuild+0x4c8/0x750 [ice]
[ 683.055543] ice_vsi_recfg_qs+0x9a/0x110 [ice]
[ 683.060697] ice_set_channels+0x14f/0x290 [ice]
[ 683.065962] ethnl_set_channels+0x333/0x3f0
[ 683.070807] genl_family_rcv_msg_doit+0xea/0x150
[ 683.076152] genl_rcv_msg+0xde/0x1d0
[ 683.080289] ? channels_prepare_data+0x60/0x60
[ 683.085432] ? genl_get_cmd+0xd0/0xd0
[ 683.089667] netlink_rcv_skb+0x50/0xf0
[ 683.094006] genl_rcv+0x24/0x40
[ 683.097638] netlink_unicast+0x239/0x340
[ 683.102177] netlink_sendmsg+0x22e/0x470
[ 683.106717] sock_sendmsg+0x5e/0x60
[ 683.110756] __sys_sendto+0xee/0x150
[ 683.114894] ? handle_mm_fault+0xd0/0x2a0
[ 683.119535] ? do_user_addr_fault+0x1f3/0x690
[ 683.134173] __x64_sys_sendto+0x25/0x30
[ 683.148231] do_syscall_64+0x3b/0xc0
[ 683.161992] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix this by taking into account the value that num_possible_cpus()
yields in addition to vsi->alloc_txq instead of doubling the latter.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path")
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Nikolay Aleksandrov says:
====================
net: nexthop: fix refcount issues when replacing groups
This set fixes a refcount bug when replacing nexthop groups and
modifying routes. It is complex because the objects look valid when
debugging memory dumps, but we end up having refcount dependency between
unlinked objects which can never be released, so in turn they cannot
free their resources and refcounts. The problem happens because we can
have stale IPv6 per-cpu dsts in nexthops which were removed from a
group. Even though the IPv6 gen is bumped, the dsts won't be released
until traffic passes through them or the nexthop is freed, that can take
arbitrarily long time, and even worse we can create a scenario[1] where it
can never be released. The fix is to release the IPv6 per-cpu dsts of
replaced nexthops after an RCU grace period so no new ones can be
created. To do that we add a new IPv6 stub - fib6_nh_release_dsts, which
is used by the nexthop code only when necessary. We can further optimize
group replacement, but that is more suited for net-next as these patches
would have to be backported to stable releases.
v2: patch 02: update commit msg
patch 03: check for mausezahn before testing and make a few comments
more verbose
[1]
This info is also present in patch 02's commit message.
Initial state:
$ ip nexthop list
id 200 via 2002:db8::2 dev bridge.10 scope link onlink
id 201 via 2002:db8::3 dev bridge scope link onlink
id 203 group 201/200
$ ip -6 route
2001:db8::10 nhid 203 metric 1024 pref medium
nexthop via 2002:db8::3 dev bridge weight 1 onlink
nexthop via 2002:db8::2 dev bridge.10 weight 1 onlink
Create rt6_info through one of the multipath legs, e.g.:
$ taskset -a -c 1 ./pkt_inj 24 bridge.10 2001:db8::10
(pkt_inj is just a custom packet generator, nothing special)
Then remove that leg from the group by replace (let's assume it is id
200 in this case):
$ ip nexthop replace id 203 group 201
Now remove the IPv6 route:
$ ip -6 route del 2001:db8::10/128
The route won't be really deleted due to the stale rt6_info holding 1
refcnt in nexthop id 200.
At this point we have the following reference count dependency:
(deleted) IPv6 route holds 1 reference over nhid 203
nh 203 holds 1 ref over id 201
nh 200 holds 1 ref over the net device and the route due to the stale
rt6_info
Now to create circular dependency between nh 200 and the IPv6 route, and
also to get a reference over nh 200, restore nhid 200 in the group:
$ ip nexthop replace id 203 group 201/200
And now we have a permanent circular dependncy because nhid 203 holds a
reference over nh 200 and 201, but the route holds a ref over nh 203 and
is deleted.
To trigger the bug just delete the group (nhid 203):
$ ip nexthop del id 203
It won't really be deleted due to the IPv6 route dependency, and now we
have 2 unlinked and deleted objects that reference each other: the group
and the IPv6 route. Since the group drops the reference it holds over its
entries at free time (i.e. its own refcount needs to drop to 0) that will
never happen and we get a permanent ref on them, since one of the entries
holds a reference over the IPv6 route it will also never be released.
At this point the dependencies are:
(deleted, only unlinked) IPv6 route holds reference over group nh 203
(deleted, only unlinked) group nh 203 holds reference over nh 201 and 200
nh 200 holds 1 ref over the net device and the route due to the stale
rt6_info
This is the last point where it can be fixed by running traffic through
nh 200, and specifically through the same CPU so the rt6_info (dst) will
get released due to the IPv6 genid, that in turn will free the IPv6
route, which in turn will free the ref count over the group nh 203.
If nh 200 is deleted at this point, it will never be released due to the
ref from the unlinked group 203, it will only be unlinked:
$ ip nexthop del id 200
$ ip nexthop
$
Now we can never release that stale rt6_info, we have IPv6 route with ref
over group nh 203, group nh 203 with ref over nh 200 and 201, nh 200 with
rt6_info (dst) with ref over the net device and the IPv6 route. All of
these objects are only unlinked, and cannot be released, thus they can't
release their ref counts.
Message from syslogd@dev at Nov 19 14:04:10 ...
kernel:[73501.828730] unregister_netdevice: waiting for bridge.10 to become free. Usage count = 3
Message from syslogd@dev at Nov 19 14:04:20 ...
kernel:[73512.068811] unregister_netdevice: waiting for bridge.10 to become free. Usage count = 3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new selftest runs a sequence which causes circular refcount
dependency between deleted objects which cannot be released and results
in a netdevice refcount imbalance.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When replacing a nexthop group, we must release the IPv6 per-cpu dsts of
the removed nexthop entries after an RCU grace period because they
contain references to the nexthop's net device and to the fib6 info.
With specific series of events[1] we can reach net device refcount
imbalance which is unrecoverable. IPv4 is not affected because dsts
don't take a refcount on the route.
[1]
$ ip nexthop list
id 200 via 2002:db8::2 dev bridge.10 scope link onlink
id 201 via 2002:db8::3 dev bridge scope link onlink
id 203 group 201/200
$ ip -6 route
2001:db8::10 nhid 203 metric 1024 pref medium
nexthop via 2002:db8::3 dev bridge weight 1 onlink
nexthop via 2002:db8::2 dev bridge.10 weight 1 onlink
Create rt6_info through one of the multipath legs, e.g.:
$ taskset -a -c 1 ./pkt_inj 24 bridge.10 2001:db8::10
(pkt_inj is just a custom packet generator, nothing special)
Then remove that leg from the group by replace (let's assume it is id
200 in this case):
$ ip nexthop replace id 203 group 201
Now remove the IPv6 route:
$ ip -6 route del 2001:db8::10/128
The route won't be really deleted due to the stale rt6_info holding 1
refcnt in nexthop id 200.
At this point we have the following reference count dependency:
(deleted) IPv6 route holds 1 reference over nhid 203
nh 203 holds 1 ref over id 201
nh 200 holds 1 ref over the net device and the route due to the stale
rt6_info
Now to create circular dependency between nh 200 and the IPv6 route, and
also to get a reference over nh 200, restore nhid 200 in the group:
$ ip nexthop replace id 203 group 201/200
And now we have a permanent circular dependncy because nhid 203 holds a
reference over nh 200 and 201, but the route holds a ref over nh 203 and
is deleted.
To trigger the bug just delete the group (nhid 203):
$ ip nexthop del id 203
It won't really be deleted due to the IPv6 route dependency, and now we
have 2 unlinked and deleted objects that reference each other: the group
and the IPv6 route. Since the group drops the reference it holds over its
entries at free time (i.e. its own refcount needs to drop to 0) that will
never happen and we get a permanent ref on them, since one of the entries
holds a reference over the IPv6 route it will also never be released.
At this point the dependencies are:
(deleted, only unlinked) IPv6 route holds reference over group nh 203
(deleted, only unlinked) group nh 203 holds reference over nh 201 and 200
nh 200 holds 1 ref over the net device and the route due to the stale
rt6_info
This is the last point where it can be fixed by running traffic through
nh 200, and specifically through the same CPU so the rt6_info (dst) will
get released due to the IPv6 genid, that in turn will free the IPv6
route, which in turn will free the ref count over the group nh 203.
If nh 200 is deleted at this point, it will never be released due to the
ref from the unlinked group 203, it will only be unlinked:
$ ip nexthop del id 200
$ ip nexthop
$
Now we can never release that stale rt6_info, we have IPv6 route with ref
over group nh 203, group nh 203 with ref over nh 200 and 201, nh 200 with
rt6_info (dst) with ref over the net device and the IPv6 route. All of
these objects are only unlinked, and cannot be released, thus they can't
release their ref counts.
Message from syslogd@dev at Nov 19 14:04:10 ...
kernel:[73501.828730] unregister_netdevice: waiting for bridge.10 to become free. Usage count = 3
Message from syslogd@dev at Nov 19 14:04:20 ...
kernel:[73512.068811] unregister_netdevice: waiting for bridge.10 to become free. Usage count = 3
Fixes: 7bf4796dd099 ("nexthops: add support for replace")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need a way to release a fib6_nh's per-cpu dsts when replacing
nexthops otherwise we can end up with stale per-cpu dsts which hold net
device references, so add a new IPv6 stub called fib6_nh_release_dsts.
It must be used after an RCU grace period, so no new dsts can be created
through a group's nexthop entry.
Similar to fib6_nh_release it shouldn't be used if fib6_nh_init has failed
so it doesn't need a dummy stub when IPv6 is not enabled.
Fixes: 7bf4796dd099 ("nexthops: add support for replace")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Without a module alias, autoloading the driver does not occurr
when it is built as a module.
By adding a module alias, the driver now probes fine automatically
and therefore analog audio output works as it should.
Fixes: 0d6a04da9b25 ("ASoC: Add Rockchip rk817 audio CODEC support")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211121150521.159543-1-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit dac7cbd55dca ("ASoC: Intel: soc-acpi-byt: shrink tables using
compatible IDs") and commit 959ae8215a9e ("ASoC: Intel: soc-acpi-cht:
shrink tables using compatible IDs") simplified the match tables in
soc-acpi-intel-byt-match.c and soc-acpi-intel-cht-match.c by merging
identical entries using the new .comp_ids snd_soc_acpi_mach field to
point a single entry to multiple ACPI HIDs and clearing the previously
unique per entry .id field.
But various machine drivers from sound/soc/intel/boards rely on mach->id
in one or more ways, e.g. some drivers contain the following snippets:
adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, ...
if (!strncmp(snd_soc_cards[i].codec_id, mach->id, 8)) { ...
All of which are broken by the match table shrinking.
Make the snd_soc_acpi_mach.id field non const (the storage for the tables
already is non const) and on a comps_ids match copy the matching HID to
the id field to fix this.
Fixes: dac7cbd55dca ("ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs")
Fixes: 959ae8215a9e ("ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs")
Suggested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Brent Lu <brent.lu@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211118153014.349222-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When IPv6 module gets initialized, but it's hitting an error in inet6_init()
where it then needs to undo all the prior initialization work, it also might
do a call to ndisc_cleanup() which then calls neigh_table_clear(). In there
is a missing timer cancellation of the table's managed_work item.
The kernel test robot explicitly triggered this error path and caused a UAF
crash similar to the below:
[...]
[ 28.833183][ C0] BUG: unable to handle page fault for address: f7a43288
[ 28.833973][ C0] #PF: supervisor write access in kernel mode
[ 28.834660][ C0] #PF: error_code(0x0002) - not-present page
[ 28.835319][ C0] *pde = 06b2c067 *pte = 00000000
[ 28.835853][ C0] Oops: 0002 [#1] PREEMPT
[ 28.836367][ C0] CPU: 0 PID: 303 Comm: sed Not tainted 5.16.0-rc1-00233-g83ff5faa0d3b #7
[ 28.837293][ C0] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1 04/01/2014
[ 28.838338][ C0] EIP: __run_timers.constprop.0+0x82/0x440
[...]
[ 28.845607][ C0] Call Trace:
[ 28.845942][ C0] <SOFTIRQ>
[ 28.846333][ C0] ? check_preemption_disabled.isra.0+0x2a/0x80
[ 28.846975][ C0] ? __this_cpu_preempt_check+0x8/0xa
[ 28.847570][ C0] run_timer_softirq+0xd/0x40
[ 28.848050][ C0] __do_softirq+0xf5/0x576
[ 28.848547][ C0] ? __softirqentry_text_start+0x10/0x10
[ 28.849127][ C0] do_softirq_own_stack+0x2b/0x40
[ 28.849749][ C0] </SOFTIRQ>
[ 28.850087][ C0] irq_exit_rcu+0x7d/0xc0
[ 28.850587][ C0] common_interrupt+0x2a/0x40
[ 28.851068][ C0] asm_common_interrupt+0x119/0x120
[...]
Note that IPv6 module cannot be unloaded as per 8ce440610357 ("ipv6: do not
allow ipv6 module to be removed") hence this can only be seen during module
initialization error. Tested with kernel test robot's reproducer.
Fixes: 7482e3841d52 ("net, neigh: Add NTF_MANAGED flag for managed neighbor entries")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The change to eth_hw_addr_set() caused gcc to correctly spot a
bug that was introduced in an earlier incorrect fix:
In file included from include/linux/etherdevice.h:21,
from drivers/net/ethernet/ni/nixge.c:7:
In function '__dev_addr_set',
inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:319:2,
inlined from 'nixge_probe' at drivers/net/ethernet/ni/nixge.c:1286:3:
include/linux/netdevice.h:4648:9: error: 'memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
4648 | memcpy(dev->dev_addr, addr, len);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As nixge_get_nvmem_address() can return either NULL or an error
pointer, the NULL check is wrong, and we can end up reading from
ERR_PTR(-EOPNOTSUPP), which gcc knows to contain zero readable
bytes.
Make the function always return an error pointer again but fix
the check to match that.
Fixes: f3956ebb3bf0 ("ethernet: use eth_hw_addr_set() instead of ether_addr_copy()")
Fixes: abcd3d6fc640 ("net: nixge: Fix error path for obtaining mac address")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Possible recursive locking is detected by lockdep when SMC
falls back to TCP. The corresponding warnings are as follows:
============================================
WARNING: possible recursive locking detected
5.16.0-rc1+ #18 Tainted: G E
--------------------------------------------
wrk/1391 is trying to acquire lock:
ffff975246c8e7d8 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0x109/0x250 [smc]
but task is already holding lock:
ffff975246c8f918 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0xfe/0x250 [smc]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ei->socket.wq.wait);
lock(&ei->socket.wq.wait);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by wrk/1391:
#0: ffff975246040130 (sk_lock-AF_SMC){+.+.}-{0:0}, at: smc_connect+0x43/0x150 [smc]
#1: ffff975246c8f918 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0xfe/0x250 [smc]
stack backtrace:
Call Trace:
<TASK>
dump_stack_lvl+0x56/0x7b
__lock_acquire+0x951/0x11f0
lock_acquire+0x27a/0x320
? smc_switch_to_fallback+0x109/0x250 [smc]
? smc_switch_to_fallback+0xfe/0x250 [smc]
_raw_spin_lock_irq+0x3b/0x80
? smc_switch_to_fallback+0x109/0x250 [smc]
smc_switch_to_fallback+0x109/0x250 [smc]
smc_connect_fallback+0xe/0x30 [smc]
__smc_connect+0xcf/0x1090 [smc]
? mark_held_locks+0x61/0x80
? __local_bh_enable_ip+0x77/0xe0
? lockdep_hardirqs_on+0xbf/0x130
? smc_connect+0x12a/0x150 [smc]
smc_connect+0x12a/0x150 [smc]
__sys_connect+0x8a/0xc0
? syscall_enter_from_user_mode+0x20/0x70
__x64_sys_connect+0x16/0x20
do_syscall_64+0x34/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The nested locking in smc_switch_to_fallback() is considered to
possibly cause a deadlock because smc_wait->lock and clc_wait->lock
are the same type of lock. But actually it is safe so far since
there is no other place trying to obtain smc_wait->lock when
clc_wait->lock is held. So the patch replaces spin_lock() with
spin_lock_nested() to avoid false report by lockdep.
Link: https://lkml.org/lkml/2021/11/19/962
Fixes: 2153bd1e3d3d ("Transfer remaining wait queue entries during fallback")
Reported-by: syzbot+e979d3597f48262cb4ee@syzkaller.appspotmail.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It turns out that vhost vsock violates the virtio spec
by supplying the out buffer length in the used length
(should just be the in length).
As a result, attempts to validate the used length fail with:
vmw_vsock_virtio_transport virtio1: tx: used len 44 is larger than in buflen 0
Since vsock driver does not use the length fox tx and
validates the length before use for rx, it is safe to
suppress the validation in virtio core for this driver.
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 939779f5152d ("virtio_ring: validate used buffer length")
Cc: "Jason Wang" <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Function axspi_read_status calls:
ret = spi_write_then_read(ax_spi->spi, ax_spi->cmd_buf, 1,
(u8 *)&status, 3);
status is a pointer to a struct spi_status, which is 3-byte wide:
struct spi_status {
u16 isr;
u8 status;
};
But &status is the pointer to this pointer, and spi_write_then_read does
not dereference this parameter:
int spi_write_then_read(struct spi_device *spi,
const void *txbuf, unsigned n_tx,
void *rxbuf, unsigned n_rx)
Therefore axspi_read_status currently receive a SPI response in the
pointer status, which overwrites 24 bits of the pointer.
Thankfully, on Little-Endian systems, the pointer is only used in
le16_to_cpus(&status->isr);
... which is a no-operation. So there, the overwritten pointer is not
dereferenced. Nevertheless on Big-Endian systems, this can lead to
dereferencing pointers after their 24 most significant bits were
overwritten. And in all systems this leads to possible use of
uninitialized value in functions calling spi_write_then_read which
expect status to be initialized when the function returns.
Moreover function axspi_read_status (and macro AX_READ_STATUS) do not
seem to be used anywhere. So currently this seems to be dead code. Fix
the issue anyway so that future code works properly when using function
axspi_read_status.
Fixes: a97c69ba4f30 ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when user space emits SIOCSHWTSTAMP ioctl calls such as
enabling/disabling timestamping or changing filter settings, the driver
reads the current CLOCK_REALTIME value and programming this into the
NIC's hardware clock. This might be necessary during system
initialization, but at runtime, when the PTP clock has already been
synchronized to a grandmaster, a reset of the timestamp settings might
result in a clock jump. Furthermore, if the clock is also controlled by
phc2sys in automatic mode (where the UTC offset is queried from ptp4l),
that UTC-to-TAI offset (currently 37 seconds in 2021) would be
temporarily reset to 0, and it would take a long time for phc2sys to
readjust so that CLOCK_REALTIME and the PHC are apart by 37 seconds
again.
To address the issue, we introduce a new function called
stmmac_init_tstamp_counter(), which gets called during ndo_open().
It contains the code snippet moved from stmmac_hwtstamp_set() that
manages the time synchronization. Besides, the sub second increment
configuration is also moved here since the related values are hardware
dependent and runtime invariant.
Furthermore, the hardware clock must be kept running even when no time
stamping mode is selected in order to retain the synchronized time base.
That way, timestamping can be enabled again at any time only with the
need to compensate the clock's natural drifting.
As a side effect, this patch fixes the issue that ptp_clock_info::enable
can be called before SIOCSHWTSTAMP and the driver (which looks at
priv->systime_flags) was not prepared to handle that ordering.
Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Reported-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Holger Assmann <h.assmann@pengutronix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add entry to MAINTAINERS for Milbeaut that supported minimal drivers.
Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Link: https://lore.kernel.org/r/1636968656-14033-5-git-send-email-sugaya.taichi@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use nn->tlv_caps.me_freq_mhz instead of nn->me_freq_mhz to check whether
rx-usecs/tx-usecs is valid.
This is because nn->tlv_caps.me_freq_mhz represents the clock_freq (MHz) of
the flow processing cores (FPC) on the NIC. While nn->me_freq_mhz is not
be set.
Fixes: ce991ab6662a ("nfp: read ME frequency from vNIC ctrl memory")
Signed-off-by: Diana Wang <na.wang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We deal with IPv6 packets, so we need to use IP6CB(skb)->flags and
IP6SKB_REROUTED, instead of IPCB(skb)->flags and IPSKB_REROUTED
Found by code inspection, please double check that fixing this bug
does not surface other bugs.
Fixes: 09ee9dba9611 ("ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tobias Brunner <tobias@strongswan.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
old tc(iproute2-5.9.0) output:
action order 1: bpf action.o:[action-ok] id 60 tag bcf7977d3b93787c jited default-action pipe
newer tc(iproute2-5.14.0) output:
action order 1: bpf action.o:[action-ok] id 64 name tag bcf7977d3b93787c jited default-action pipe
It can fix below errors:
# ok 260 f84a - Add cBPF action with invalid bytecode
# not ok 261 e939 - Add eBPF action with valid object-file
# Could not match regex pattern. Verify command output:
# total acts 0
#
# action order 1: bpf action.o:[action-ok] id 42 name tag bcf7977d3b93787c jited default-action pipe
# index 667 ref 1 bind 0
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We should not always presume all kernels use pfifo_fast as the default qdisc.
For example, a fq_codel qdisk could have below output:
qdisc fq_codel 0: parent 1:4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
qca8k has a global MTU, so its tracking the MTU per port to make sure
that the largest MTU gets applied.
Since it uses the frame size instead of MTU the driver MTU change function
will then add the size of Ethernet header and checksum on top of MTU.
The driver currently populates the per port MTU size as Ethernet frame
length + checksum which equals 1518.
The issue is that then MTU change function will go through all of the
ports, find the largest MTU and apply the Ethernet header + checksum on
top of it again, so for a desired MTU of 1500 you will end up with 1536.
This is obviously incorrect, so to correct it populate the per port struct
MTU with just the MTU and not include the Ethernet header + checksum size
as those will be added by the MTU change function.
Fixes: f58d2598cf70 ("net: dsa: qca8k: implement the port MTU callbacks")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With SGMII phy the internal delay is always applied to the PAD0 config.
This is caused by the falling edge configuration that hardcode the reg
to PAD0 (as the falling edge bits are present only in PAD0 reg)
Move the delay configuration before the reg overwrite to correctly apply
the delay.
Fixes: cef08115846e ("net: dsa: qca8k: set internal delay also for sgmii")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ARCH_FEATURES function ID is a 32-bit SMC call, which returns
a 32-bit result per the SMCCC spec. Current code is doing a 64-bit
comparison against -1 (SMCCC_RET_NOT_SUPPORTED) to detect that the
feature is unimplemented. That check doesn't work in a Hyper-V VM,
where the upper 32-bits are zero as allowed by the spec.
Cast the result as an 'int' so the comparison works. The change also
makes the code consistent with other similar checks in this file.
Fixes: 821b67fa4639 ("firmware: smccc: Add ARCH_SOC_ID support")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
SoCFPGA fix for v5.16
- Fix crash when CONFIG_FORTIRY_SOURCE is enabled
* tag 'socfpga_fix_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
Link: https://lore.kernel.org/r/20211119153224.2761257-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v5.16
Couple of fixes for sparse warnings(type error assignment in voltage and
sensor protocols), add proper propagation of error from scmi_pm_domain_probe
handling agent discovery response in base protocol correctly and a fix
to avoid null pointer de-reference in the error path.
* tag 'scmi-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix type error assignment in voltage protocol
firmware: arm_scmi: Fix type error in sensor protocol
firmware: arm_scmi: pm: Propagate return value to caller
firmware: arm_scmi: Fix base agent discover response
firmware: arm_scmi: Fix null de-reference on error path
Link: https://lore.kernel.org/r/20211118121656.4014764-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fix possible NULL pointer dereference in OP-TEE driver
* tag 'optee-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: fix kfree NULL pointer
Link: https://lore.kernel.org/r/20211117125747.GA2896197@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.16, please pull the following:
- Florian fixes the BCM5310x DTS include file to have the appropriate
I2C controller interrupt line, and allows the BCMA GPIO controller to
be used as an interrupt controller. Finally, the BCM2711 (Raspberry Pi
4) PCIe Device Tree node interrupts are fixed to list the correct
interrupt output as well as the INTB/C/D lines.
* tag 'arm-soc/for-5.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: Fix PCIe interrupts
ARM: dts: BCM5301X: Add interrupt properties to GPIO node
ARM: dts: BCM5301X: Fix I2C controller interrupt
Link: https://lore.kernel.org/r/20211116201429.2692786-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the following Telit LE910S1 composition:
0x9200: tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20211119140319.10448-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
This reverts commit 279917e27edc293eb645a25428c6ab3f3bca3f86.
With the CONFIG_HARDENED_USERCOPY option enabled, this patch triggers
kernel bugs at runtime:
usercopy: Kernel memory overwrite attempt detected to kernel text (offset 2084839, size 6)!
kernel BUG at mm/usercopy.c:99!
Backtrace:
IAOQ[0]: usercopy_abort+0xc4/0xe8
[<00000000406ed1c8>] __check_object_size+0x174/0x238
[<00000000407086d4>] copy_strings.isra.0+0x3e8/0x708
[<0000000040709a20>] do_execveat_common.isra.0+0x1bc/0x328
[<000000004070b760>] compat_sys_execve+0x7c/0xb8
[<0000000040303eb8>] syscall_exit+0x0/0x14
The problem is, that we have an init section of at least 2MB size which
starts at _stext and is freed after bootup.
If then later some kernel data is (temporarily) stored in this free
memory, check_kernel_text_object() will trigger a bug since the data
appears to be inside the kernel text (>=_stext) area:
if (overlaps(ptr, len, _stext, _etext))
usercopy_abort("kernel text");
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@kernel.org # 5.4+
|
|
Convert the PTE lookup functions to use the safer extru_safe macro.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The extru instruction leaves the most significant 32 bits of the target
register in an undefined state on PA 2.0 systems. If any of these bits
are nonzero, this will break the calculation of the lock pointer.
Fix by using extrd,u instruction via extru_safe macro on 64-bit kernels.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The extru instruction leaves the most significant 32 bits of the
target register in an undefined state on PA 2.0 systems.
Provide a macro to safely use extru on 32- and 64-bit machines.
Suggested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
PA-RISC uses a much bigger frame size for functions than other
architectures. So increase it to 2048 for 32- and 64-bit kernels.
This fixes e.g. a warning in lib/xxhash.c.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The KVM_MAX_VCPUS value is supposed to be aligned with number of
VMID bits in the hgatp CSR but the current KVM_MAX_VCPUS value
is aligned with number of ASID bits in the satp CSR.
Fixes: 99cdc6c18c2d ("RISC-V: Add initial skeletal KVM support")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
|
|
Unmap stage2 page tables when a memslot is being deleted or moved. It's
the architectures' responsibility to ensure existing mappings are removed
when kvm_arch_flush_shadow_memslot() returns.
Fixes: 9d05c1fee837 ("RISC-V: KVM: Implement stage2 page table programming")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
|
|
Before commit 740499c78408 ("iomap: fix the iomap_readpage_actor return
value for inline data"), when hitting an IOMAP_INLINE extent,
iomap_readpage_actor would report having read the entire page. Since
then, it only reports having read the inline data (iomap->length).
This will force iomap_readpage into another iteration, and the
filesystem will report an unaligned hole after the IOMAP_INLINE extent.
But iomap_readpage_actor (now iomap_readpage_iter) isn't prepared to
deal with unaligned extents, it will get things wrong on filesystems
with a block size smaller than the page size, and we'll eventually run
into the following warning in iomap_iter_advance:
WARN_ON_ONCE(iter->processed > iomap_length(iter));
Fix that by changing iomap_readpage_iter to return 0 when hitting an
inline extent; this will cause iomap_iter to stop immediately.
To fix readahead as well, change iomap_readahead_iter to pass on
iomap_readpage_iter return values less than or equal to zero.
Fixes: 740499c78408 ("iomap: fix the iomap_readpage_actor return value for inline data")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
|
|
Looks like 658f4c829688 ("drm/msm/devfreq: Add 1ms delay before
clamping freq") was badly rebased on top of efb8a170a367 ("drm/msm:
Fix devfreq NULL pointer dereference on a3xx") and ended up with
the NULL check in the wrong place.
Fixes: 658f4c829688 ("drm/msm/devfreq: Add 1ms delay before clamping freq")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20211120200103.1051459-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
This was supposed to be a relative timer, not absolute.
Fixes: 658f4c829688 ("drm/msm/devfreq: Add 1ms delay before clamping freq")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20211120200103.1051459-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Avoid a possible uninitialized use of gpu_scid variable to fix the
below smatch warning:
drivers/gpu/drm/msm/adreno/a6xx_gpu.c:1480 a6xx_llc_activate()
error: uninitialized symbol 'gpu_scid'.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211118154903.3.Ie4ac321feb10168af569d9c2b4cf6828bed8122c@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Fix the below null pointer dereference in msm_ioctl_gem_submit():
26545.260705: Call trace:
26545.263223: kref_put+0x1c/0x60
26545.266452: msm_ioctl_gem_submit+0x254/0x744
26545.270937: drm_ioctl_kernel+0xa8/0x124
26545.274976: drm_ioctl+0x21c/0x33c
26545.278478: drm_compat_ioctl+0xdc/0xf0
26545.282428: __arm64_compat_sys_ioctl+0xc8/0x100
26545.287169: el0_svc_common+0xf8/0x250
26545.291025: do_el0_svc_compat+0x28/0x54
26545.295066: el0_svc_compat+0x10/0x1c
26545.298838: el0_sync_compat_handler+0xa8/0xcc
26545.303403: el0_sync_compat+0x188/0x1c0
26545.307445: Code: d503201f d503201f 52800028 4b0803e8 (b8680008)
26545.318799: Kernel panic - not syncing: Oops: Fatal exception
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211118154903.2.I3ae019673a0cc45d83a193a7858748dd03dbb820@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Mesa attempts to allocate a cached-coherent buffer in order to determine
if cached-coherent is supported. Resulting in seeing this error message
once per process with newer mesa. But no reason for this to be more
than a debug msg.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20211111230214.765476-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20211111230151.765228-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
When converting to use an idr to map userspace fence seqno values back
to a dma_fence, we lost the error return when userspace passes seqno
that is larger than the last submitted fence. Restore this check.
Reported-by: Akhil P Oommen <akhilpo@codeaurora.org>
Fixes: a61acbbe9cf8 ("drm/msm: Track "seqno" fences by idr")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211111192457.747899-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
We weren't dropping the submitqueue reference in all paths. In
particular, when the fence has already been signalled. Split out
a helper to simplify handling this in the various different return
paths.
Fixes: a61acbbe9cf8 ("drm/msm: Track "seqno" fences by idr")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20211111192457.747899-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
In commit 510410bfc034 ("drm/msm: Implement mmap as GEM object
function") we switched to a new/cleaner method of doing things. That's
good, but we missed a little bit.
Before that commit, we used to _first_ run through the
drm_gem_mmap_obj() case where `obj->funcs->mmap()` was NULL. That meant
that we ran:
vma->vm_flags |= VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP;
vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags));
vma->vm_page_prot = pgprot_decrypted(vma->vm_page_prot);
...and _then_ we modified those mappings with our own. Now that
`obj->funcs->mmap()` is no longer NULL we don't run the default
code. It looks like the fact that the vm_flags got VM_IO / VM_DONTDUMP
was important because we're now getting crashes on Chromebooks that
use ARC++ while logging out. Specifically a crash that looks like this
(this is on a 5.10 kernel w/ relevant backports but also seen on a
5.15 kernel):
Unable to handle kernel paging request at virtual address ffffffc008000000
Mem abort info:
ESR = 0x96000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008293d000
[ffffffc008000000] pgd=00000001002b3003, p4d=00000001002b3003,
pud=00000001002b3003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] PREEMPT SMP
[...]
CPU: 7 PID: 15734 Comm: crash_dump64 Tainted: G W 5.10.67 #1 [...]
Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT)
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
pc : __arch_copy_to_user+0xc0/0x30c
lr : copyout+0xac/0x14c
[...]
Call trace:
__arch_copy_to_user+0xc0/0x30c
copy_page_to_iter+0x1a0/0x294
process_vm_rw_core+0x240/0x408
process_vm_rw+0x110/0x16c
__arm64_sys_process_vm_readv+0x30/0x3c
el0_svc_common+0xf8/0x250
do_el0_svc+0x30/0x80
el0_svc+0x10/0x1c
el0_sync_handler+0x78/0x108
el0_sync+0x184/0x1c0
Code: f8408423 f80008c3 910020c6 36100082 (b8404423)
Let's add the two flags back in.
While we're at it, the fact that we aren't running the default means
that we _don't_ need to clear out VM_PFNMAP, so remove that and save
an instruction.
NOTE: it was confirmed that VM_IO was the important flag to fix the
problem I was seeing, but adding back VM_DONTDUMP seems like a sane
thing to do so I'm doing that too.
Fixes: 510410bfc034 ("drm/msm: Implement mmap as GEM object function")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211110113334.1.I1687e716adb2df746da58b508db3f25423c40b27@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
