summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-04NFC: Fix target mode p2p link establishmentArron Wang
With commit e29a9e2ae165620d, we set the active_target pointer from nfc_dep_link_is_up() in order to support the case where the target detection and the DEP link setting are done atomically by the driver. That can only happen in initiator mode, so we need to check for that otherwise we fail to bring a p2p link in target mode. Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-03qlcnic: Fix bug in Tx completion pathShahed Shaikh
o Driver is using common tx_clean_lock for all Tx queues. This patch adds per queue tx_clean_lock. o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Fixed in this patch. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03infiniband: make sure the src net is infiniband when create new linkHangbin Liu
When we create a new infiniband link with uninfiniband device, e.g. `ip link add link em1 type ipoib pkey 0x8001`. We will get a NULL pointer dereference cause other dev like Ethernet don't have struct ib_device. The code path is: rtnl_newlink |-- ipoib_new_child_link |-- __ipoib_vlan_add |-- ipoib_set_dev_features |-- ib_query_device Fix this bug by make sure the src net is infiniband when create new link. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03{vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properlyfan.du
Even if user doesn't supply the physical netdev to attach vxlan dev to, and at the same time user want to vxlan sit top of IPv6, mark vxlan_dev flags with VXLAN_F_IPV6 to create IPv6 based socket. Otherwise kernel crashes safely every time spitting below messages, Steps to reproduce: ip link add vxlan0 type vxlan id 42 group ff0e::110 ip link set vxlan0 up [ 62.656266] BUG: unable to handle kernel NULL pointer dereference[ 62.656320] ip (3008) used greatest stack depth: 3912 bytes left at 0000000000000046 [ 62.656423] IP: [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.656525] PGD 2c966067 PUD 2c9a2067 PMD 0 [ 62.656674] Oops: 0000 [#1] SMP [ 62.656781] Modules linked in: vxlan netconsole deflate zlib_deflate af_key [ 62.657083] CPU: 1 PID: 2128 Comm: whoopsie Not tainted 3.12.0+ #182 [ 62.657083] Hardware name: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006 [ 62.657083] task: ffff88002e2335d0 ti: ffff88002c94c000 task.ti: ffff88002c94c000 [ 62.657083] RIP: 0010:[<ffffffff816d822d>] [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP: 0000:ffff88002fd038f8 EFLAGS: 00210296 [ 62.657083] RAX: 0000000000000000 RBX: ffff88002fd039e0 RCX: 0000000000000000 [ 62.657083] RDX: ffff88002fd0eb68 RSI: ffff88002fd0d278 RDI: ffff88002fd0d278 [ 62.657083] RBP: ffff88002fd03918 R08: 0000000002000000 R09: 0000000000000000 [ 62.657083] R10: 00000000000001ff R11: 0000000000000000 R12: 0000000000000001 [ 62.657083] R13: ffff88002d96b480 R14: ffffffff81c8e2c0 R15: 0000000000000001 [ 62.657083] FS: 0000000000000000(0000) GS:ffff88002fd00000(0063) knlGS:00000000f693b740 [ 62.657083] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 62.657083] CR2: 0000000000000046 CR3: 000000002c9d2000 CR4: 00000000000006e0 [ 62.657083] Stack: [ 62.657083] ffff88002fd03a40 ffffffff81c8e2c0 ffff88002fd039e0 ffff88002d96b480 [ 62.657083] ffff88002fd03958 ffffffff816cac8b ffff880019277cc0 ffff8800192b5d00 [ 62.657083] ffff88002d5bc000 ffff880019277cc0 0000000000001821 0000000000000001 [ 62.657083] Call Trace: [ 62.657083] <IRQ> [ 62.657083] [<ffffffff816cac8b>] ip6_dst_lookup_tail+0xdb/0xf0 [ 62.657083] [<ffffffff816caea0>] ip6_dst_lookup+0x10/0x20 [ 62.657083] [<ffffffffa0020c13>] vxlan_xmit_one+0x193/0x9c0 [vxlan] [ 62.657083] [<ffffffff8137b3b7>] ? account+0xc7/0x1f0 [ 62.657083] [<ffffffffa0021513>] vxlan_xmit+0xd3/0x400 [vxlan] [ 62.657083] [<ffffffff8161390d>] dev_hard_start_xmit+0x49d/0x5e0 [ 62.657083] [<ffffffff81613d29>] dev_queue_xmit+0x2d9/0x480 [ 62.657083] [<ffffffff817cb854>] ? _raw_write_unlock_bh+0x14/0x20 [ 62.657083] [<ffffffff81630565>] ? eth_header+0x35/0xe0 [ 62.657083] [<ffffffff8161bc5e>] neigh_resolve_output+0x11e/0x1e0 [ 62.657083] [<ffffffff816ce0e0>] ? ip6_fragment+0xad0/0xad0 [ 62.657083] [<ffffffff816cb465>] ip6_finish_output2+0x2f5/0x470 [ 62.657083] [<ffffffff816ce166>] ip6_finish_output+0x86/0xc0 [ 62.657083] [<ffffffff816ce218>] ip6_output+0x78/0xb0 [ 62.657083] [<ffffffff816eadd6>] mld_sendpack+0x256/0x2a0 [ 62.657083] [<ffffffff816ebd8c>] mld_ifc_timer_expire+0x17c/0x290 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff81051065>] call_timer_fn+0x45/0x150 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff81052353>] run_timer_softirq+0x1f3/0x2a0 [ 62.657083] [<ffffffff8102dfd8>] ? lapic_next_event+0x18/0x20 [ 62.657083] [<ffffffff8109e36f>] ? clockevents_program_event+0x6f/0x110 [ 62.657083] [<ffffffff8104a2f6>] __do_softirq+0xd6/0x2b0 [ 62.657083] [<ffffffff8104a75e>] irq_exit+0x7e/0xa0 [ 62.657083] [<ffffffff8102ea15>] smp_apic_timer_interrupt+0x45/0x60 [ 62.657083] [<ffffffff817d3eca>] apic_timer_interrupt+0x6a/0x70 [ 62.657083] <EOI> [ 62.657083] [<ffffffff817d4a35>] ? sysenter_dispatch+0x7/0x1a [ 62.657083] Code: 4d 8b 85 a8 02 00 00 4c 89 e9 ba 03 04 00 00 48 c7 c6 c0 be 8d 81 48 c7 c7 48 35 a3 81 31 c0 e8 db 68 0e 00 49 8b 85 a8 02 00 00 <0f> b6 40 46 c0 e8 05 0f b6 c0 c1 e0 03 41 09 c4 e9 77 ff ff ff [ 62.657083] RIP [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP <ffff88002fd038f8> [ 62.657083] CR2: 0000000000000046 [ 62.657083] ---[ end trace ba8a9583d7cd1934 ]--- [ 62.657083] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Fan Du <fan.du@windriver.com> Reported-by: Ryan Whelan <rcwhelan@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03cxgb4: allow large buffer size to have page sizeThadeu Lima de Souza Cascardo
Since commit 52367a763d8046190754ab43743e42638564a2d1 ("cxgb4/cxgb4vf: Code cleanup to enable T4 Configuration File support"), we have failures like this during cxgb4 probe: cxgb4 0000:01:00.4: bad SGE FL page buffer sizes [65536, 65536] cxgb4: probe of 0000:01:00.4 failed with error -22 This happens whenever software parameters are used, without a configuration file. That happens when the hardware was already initialized (after kexec, or after csiostor is loaded). It happens that these values are acceptable, rendering fl_pg_order equal to 0, which is the case of a hard init when the page size is equal or larger than 65536. Accepting fl_large_pg equal to fl_small_pg solves the issue, and shouldn't cause any trouble besides a possible performance reduction when smaller pages are used. And that can be fixed by a configuration file. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-03x86, cpu: Detect more TLB configurationKirill A. Shutemov
The Intel Software Developer’s Manual covers few more TLB configurations exposed as CPUID 2 descriptors: 61H Instruction TLB: 4 KByte pages, fully associative, 48 entries 63H Data TLB: 1 GByte pages, 4-way set associative, 4 entries 76H Instruction TLB: 2M/4M pages, fully associative, 8 entries B5H Instruction TLB: 4KByte pages, 8-way set associative, 64 entries B6H Instruction TLB: 4KByte pages, 8-way set associative, 128 entries C1H Shared 2nd-Level TLB: 4 KByte/2MByte pages, 8-way associative, 1024 entries C2H DTLB DTLB: 2 MByte/$MByte pages, 4-way associative, 16 entries Let's detect them as well. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/1387801018-14499-1-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-03Merge tag 'for-v3.13-fixes' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery fixes from Anton Vorontsov: "Two fixes: - fix build error caused by max17042_battery conversion to the regmap API. - fix kernel oops when booting with wakeup_source_activate enabled" * tag 'for-v3.13-fixes' of git://git.infradead.org/battery-2.6: max17042_battery: Fix build errors caused by missing REGMAP_I2C config power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate
2014-01-03Merge tag 'pm+acpi-3.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and PM fixes and new device IDs from Rafael Wysocki: "These commits, except for one, are regression fixes and the remaining one fixes a divide error leading to a kernel panic. The majority of the regressions fixed here were introduced during the 3.12 cycle, one of them is from this cycle and one is older. Specifics: - VGA switcheroo was broken for some users as a result of the ACPI-based PCI hotplug (ACPIPHP) changes in 3.12, because some previously ignored hotplug events started to be handled. The fix causes them to be ignored again. - There are two more issues related to cpufreq's suspend/resume handling changes from the 3.12 cycle addressed by Viresh Kumar's fixes. - intel_pstate triggers a divide error in a timer function if the P-state information it needs is missing during initialization. This leads to kernel panics on nested KVM clients and is fixed by failing the initialization cleanly in those cases. - PCI initalization code changes during the 3.9 cycle uncovered BIOS issues related to ACPI wakeup notifications (some BIOSes send them for devices that aren't supposed to support ACPI wakeup). Work around them by installing an ACPI wakeup notify handler for all PCI devices with ACPI support. - The Calxeda cpuilde driver's probe function is tagged as __init, which is incorrect and causes a section mismatch to occur during build. Fix from Andre Przywara removes the __init tag from there. - During the 3.12 cycle ACPIPHP started to print warnings about missing _ADR for devices that legitimately don't have it. Fix from Toshi Kani makes it only print the warnings where they make sense" * tag 'pm+acpi-3.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug intel_pstate: Fail initialization if P-state information is missing ARM/cpuidle: remove __init tag from Calxeda cpuidle probe function PCI / ACPI: Install wakeup notify handlers for all PCI devs with ACPI cpufreq: preserve user_policy across suspend/resume cpufreq: Clean up after a failing light-weight initialization ACPI / PCI / hotplug: Avoid warning when _ADR not present
2014-01-03USB: oti6858: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: oti6858: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: clean up interrupt handlerJohan Hovold
Clean up interrupt completion handler somewhat. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: fix ignored TIOCMIWAIT maskJohan Hovold
Make sure the TIOCMIWAIT mask is always honoured. The CH341 interrupt status has a multiple-status changed flag which indicates that multiple status changes has occurred since last interrupt event. Unfortunately, if the final status is the same, there appears to be no way to determine which signal(s) has changed (an even number of times). This means that the multiple-status flag should not be used in TIOCMIWAIT as it leads to the signal mask argument being ignored (e.g. TIOCMIWAIT could return if DSR changes twice, even though the user only cares about carrier changes). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: clean up line-status handlingJohan Hovold
Clean up line-status handling. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: ch341: refactor line-status handlingJohan Hovold
Refactor line-status handling. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: clean up protocol definitionsJohan Hovold
Clean up protocol definitions. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: cypress_m8: fix ring-indicator detection and reportingJohan Hovold
Fix ring-indicator (RI) status-bit definition, which was defined as CTS, effectively preventing RI-changes from being detected while reporting false RI status. This bug predates git. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: switch to generic TIOCMIWAIT implementationJohan Hovold
Switch to the generic TIOCMIWAIT implementation which does not suffer from the races involved when using the deprecated sleep_on functions. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: only wake up MSR queue on changesJohan Hovold
Only wake up MSR wait queue on actual modem-status changes. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: clean up line-status handlingJohan Hovold
Clean up line-status handling somewhat. Get tty-reference only when actually needed. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: make type data constJohan Hovold
Declare constant device-type data as const. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: Nokia 502 is an unusual deviceMikhail Zolotaryov
The USB storage operation of Nokia Asha 502 Dual SIM smartphone running Asha Platform 1.1.1 is unreliable in respect of data consistency (i.e. transfered files are corrupted). A similar issue is described here: http://discussions.nokia.com/t5/Asha-and-other-Nokia-Series-30/Nokia-301-USB-transfers-and-corrupted-files/td-p/1974170 The workaround is (MAX_SECTORS_64): rmmod usb_storage && modprobe usb_storage quirks=0421:06aa:m The patch adds the tested device to the unusual list permanently. Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: add support for iBall 3.5G connect usb modemRahul Bedarkar
Add support for iBall 3.5G connect usb modem. $lsusb Bus 002 Device 006: ID 1c9e:9605 OMEGA TECHNOLOGY $usb-devices T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9605 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: correct spelling mistakes in commentsRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: musb: correct spelling mistakes in comment and error stringRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: misc: idmouse: correct spelling mistake in error stringRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: yurex: fix spelling mistake in commentRahul Bedarkar
fix spelling mistake in comment Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: chipidea: add guard macro to ci_hdrc_imx.hRahul Bedarkar
Add guard macro to driver/usb/chipidea/ci_hdrc_imx.h Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03usb: ehci: Cleanup usb-ehci-orion.h headerSachin Kamat
Commit c02cecb92ed4 ("ARM: orion: move platform_data definitions") moved the file to the current location but forgot to remove the pointer to its previous location. Clean it up. While at it also change the header file protection macros appropriately. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: iowarrior: fix spelling mistake in commentRahul Bedarkar
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: use C_CMSPAR macroJohan Hovold
Use the new C_CMSPAR macro for consistency. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: serial: add Moxa UPORT 12XX/14XX/16XX driverAndrew Lunn
Add a driver which supports the following Moxa USB to serial converters: * 2 ports : UPort 1250, UPort 1250I * 4 ports : UPort 1410, UPort 1450, UPort 1450I * 8 ports : UPort 1610-8, UPort 1650-8 * 16 ports : UPort 1610-16, UPort 1650-16 The UPORT devices don't directly fit the USB serial model. USB serial assumes a bulk in/out endpoint pair per serial port. Thus a dual port USB serial device is expected to have two bulk in/out pairs. The Moxa UPORT only has one pair for data transfer and places a header on each transfer over the endpoint indicating for which port the transfer relates to. There is a second endpoint pair for events, such as modem control lines changing state, setting baud rates etc. Again, a multiplexing header is used on these endpoints. Some ports need to have a kfifo explicitly allocated since the framework does not allocate one if there is no associated endpoints. The framework will however free it on unload of the module. All data transfers are made on port0, yet the locks are taken on PortN. urb->context points to PortN, even though the URB is for port0. Where possible, code from the generic driver is called. However mxuport_process_read_urb_data() is mostly a cut/paste of usb_serial_generic_process_read_urb(). The driver will attempt to load firmware from userspace and compare the available version and the running version. If the available version is newer, it will be download into RAM of the device and started. This is optional and the driver appears to work O.K. with older firmware in the devices ROM. This driver is based on the MOXA driver and retains MOXAs copyright. [jhovold@gmail.com: fix get_fw_version error path and some style issues] Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03tty: Add C_CMSPAR(tty)Andrew Lunn
Add the missing C_CMSPAR(tty) macro. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: use direct baud-rate encoding when possibleJohan Hovold
Use direct baud-rate encoding rather than divisors for supported baud rates. This restores the way baud rates were set prior to commit 8d48fdf689fe ("USB: PL2303: correctly handle baudrates above 115200") which added divisor encoding, but also switched to the new encoding method for all baudrates above 115200. As noted by Frank Schäfer <fschaefer.oss@googlemail.com>, baud rate 500k was later errounously added to the supported baud-rate table although it can only be set using divisors. Note that the current implementation could easily be extended to support arbitrary non-standard baud rates using divisors (e.g. by falling back to divisors when the table lookup fails). Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: add helper function for direct baud-rate encodingJohan Hovold
Add helper function for direct baud-rate encoding. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: refactor baud-rate divisor handlingJohan Hovold
Refactor baud-rate divisor handling. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: enforce baud-rate limits before lookupJohan Hovold
Enforce any baud-rate limits before doing table lookup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: refactor baud-rate table lookupJohan Hovold
Refactor supported baud-rate table lookup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: rename pl2303_encode_baud_rateJohan Hovold
Rename baud-rate encoding function to match tty naming. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: add device-type abstractionJohan Hovold
Encode all device-type specifics in a struct rather than testing for device type and spreading such information throughout the driver. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: add quirk for legacy devicesJohan Hovold
Add quirk for legacy devices (type 0 and 1) rather than testing on device type throughout the driver. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: clean up type handlingJohan Hovold
Merge types 0 and 1, whose differences are unknown and have always been treated the same. Add TYPE_-prefix to both types. Test for TYPE_01 (rather than !TYPE_HX) for legacy device quirks. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: use speed_t for baud ratesJohan Hovold
Use speed_t for baud rates throughout. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: add line-status quirk for Siemens phonesJohan Hovold
Implement line-status handling for Siemens phones as a quirk rather than spreading such information all over the driver by matching on vendor and and product ids. Note that the SIEMENS_PRODUCT_ID_EF81, which was added after the line-status handling for the other Siemens phones was fixed, might also need this quirk. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: remove redundant line-request callJohan Hovold
Remove redundant get_line_request (the read back settings are never used). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: add error handling to line requestsJohan Hovold
Refactor and add error handling to line requests. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-03USB: pl2303: add error handling to set_control_linesJohan Hovold
Add error handling to set_control_lines. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-15 20:54:28 +0000