summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-13scsi: mpt3sas: Fix out-of-bounds warnings in _ctl_addnl_diag_queryGustavo A. R. Silva
Fix the following out-of-bounds warnings by embedding existing struct htb_rel_query into struct mpt3_addnl_diag_query, instead of duplicating its members: include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds] include/linux/fortify-string.h:22:29: warning: '__builtin_memset' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds] The problem is that the original code is trying to copy data into a bunch of struct members adjacent to each other in a single call to memcpy(). All those members are exactly the same contained in struct htb_rel_query, so instead of duplicating them into struct mpt3_addnl_diag_query, replace them with new member rel_query of type struct htb_rel_query. So, now that this new object is introduced, memcpy() doesn't overrun the length of &karg.buffer_rel_condition, because the address of the new struct object _rel_query_ is used as destination, instead. The same issue is present when calling memset(), and it is fixed with this same approach. Below is a comparison of struct mpt3_addnl_diag_query, before and after this change (the size and cachelines remain the same): $ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o struct mpt3_addnl_diag_query { struct mpt3_ioctl_header hdr; /* 0 12 */ uint32_t unique_id; /* 12 4 */ uint16_t buffer_rel_condition; /* 16 2 */ uint16_t reserved1; /* 18 2 */ uint32_t trigger_type; /* 20 4 */ uint32_t trigger_info_dwords[2]; /* 24 8 */ uint32_t reserved2[2]; /* 32 8 */ /* size: 40, cachelines: 1, members: 7 */ /* last cacheline: 40 bytes */ }; $ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o struct mpt3_addnl_diag_query { struct mpt3_ioctl_header hdr; /* 0 12 */ uint32_t unique_id; /* 12 4 */ struct htb_rel_query rel_query; /* 16 16 */ uint32_t reserved2[2]; /* 32 8 */ /* size: 40, cachelines: 1, members: 4 */ /* last cacheline: 40 bytes */ }; Also, this helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/60659889.bJJILx2THu3hlpxW%25lkp@intel.com/ Link: https://lore.kernel.org/r/20210401162054.GA397186@embeddedor Build-tested-by: kernel test robot <lkp@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12libbpf: Clarify flags in ringbuf helpersPedro Tammela
In 'bpf_ringbuf_reserve()' we require the flag to '0' at the moment. For 'bpf_ringbuf_{discard,submit,output}' a flag of '0' might send a notification to the process if needed. Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210412192434.944343-1-pctammela@mojatatu.com
2021-04-13scsi: qedf: Use devlink to report errors and recoveryJaved Hasan
Use devlink_health_report() to push error indications. Implement this in qede via a callback function to make it possible to reuse it for other drivers sitting on top of qed in future. Also remove forcible recovery trigger and put it as a normal devlink callback in qed module. This allows user to enable/disable it via: devlink health set pci/xxxx:xx:xx.x reporter fw_fatal auto_recover false Link: https://lore.kernel.org/r/20210331164917.24662-3-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qedf: Enable devlink supportJaved Hasan
Devlink instance lifetime was linked to qed_dev object. That caused devlink to be recreated on each recovery. Change it by making higher level driver (qede) responsible for lifetime management. This way devlink survives recoveries. qede now stores devlink structure pointer as a part of its device object, devlink private data contains a linkage structure, qed_devlink. Link: https://lore.kernel.org/r/20210331164917.24662-2-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: sni_53c710: Add IRQ checkSergey Shtylyov
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #s), causing it to fail with -EINVAL (overridden by -ENODEV further below). Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/8f4b8fa5-8251-b977-70a1-9099bcb4bb17@omprussia.ru Fixes: c27d85f3f3c5 ("[SCSI] SNI RM 53c710 driver") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: sun3x_esp: Add IRQ checkSergey Shtylyov
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real error code. Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/363eb4c8-a3bf-4dc9-2a9e-90f349030a15@omprussia.ru Fixes: 0bb67f181834 ("[SCSI] sun3x_esp: convert to esp_scsi") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: jazz_esp: Add IRQ checkSergey Shtylyov
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real error code. Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/594aa9ae-2215-49f6-f73c-33bd38989912@omprussia.ru Fixes: 352e921f0dd4 ("[SCSI] jazz_esp: converted to use esp_core") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: hisi_sas: Fix IRQ checksSergey Shtylyov
Commit df2d8213d9e3 ("hisi_sas: use platform_get_irq()") failed to take into account that irq_of_parse_and_map() and platform_get_irq() have a different way of indicating an error: the former returns 0 and the latter returns a negative error code. Fix up the IRQ checks! Link: https://lore.kernel.org/r/810f26d3-908b-1d6b-dc5c-40019726baca@omprussia.ru Fixes: df2d8213d9e3 ("hisi_sas: use platform_get_irq()") Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: ufs: ufshcd-pltfrm: Fix deferred probingSergey Shtylyov
The driver overrides the error codes returned by platform_get_irq() to -ENODEV, so if it returns -EPROBE_DEFER, the driver would fail the probe permanently instead of the deferred probing. Propagate the error code upstream as it should have been done from the start... Link: https://lore.kernel.org/r/420364ca-614a-45e3-4e35-0e0653c7bc53@omprussia.ru Fixes: 2953f850c3b8 ("[SCSI] ufs: use devres functions for ufshcd") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: snic: Convert to DEFINE_SHOW_ATTRIBUTE()dingsenjie
Use DEFINE_SHOW_ATTRIBUTE() macro to simplify the code. Link: https://lore.kernel.org/r/20210331065326.18804-1-dingsenjie@163.com Signed-off-by: dingsenjie <dingsenjie@yulong.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: ufs: ufs-qcom: Remove redundant dev_err() call in ufs_qcom_init()Ye Bin
There is a error message within devm_ioremap_resource() already, so remove the dev_err() call to avoid redundant error message. Link: https://lore.kernel.org/r/20210409075522.2111083-1-yebin10@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Print SATA device SAS address for soft reset failureLuo Jiaxing
Add (pseudo) SAS address for ATA software reset failure log to assist in debugging. Link: https://lore.kernel.org/r/1617709711-195853-7-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Warn in v3 hw channel interrupt handler when status reg clearedLuo Jiaxing
If a channel interrupt occurs without any status bit set, the handler will return directly. However, if such redundant interrupts are received, it's better to check what happen, so add logs for this. Link: https://lore.kernel.org/r/1617709711-195853-6-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Yihang Li <liyihang6@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Directly snapshot registers when executing a resetJianqin Xie
The debugfs snapshot should be executed before the reset occurs to ensure that the register contents are saved properly. As such, it is incorrect to queue the debugfs dump when running a reset as the reset will occur prior to the snapshot work item is handler. Therefore, directly snapshot registers in the reset work handler. Link: https://lore.kernel.org/r/1617709711-195853-5-git-send-email-john.garry@huawei.com Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Call sas_unregister_ha() to roll back if .hw_init() failsXiang Chen
Function sas_unregister_ha() needs to be called to roll back if hisi_hba->hw->hw_init() fails in function hisi_sas_probe() or hisi_sas_v3_probe(). Make that change. Link: https://lore.kernel.org/r/1617709711-195853-4-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Print SAS address for v3 hw erroneous completion printLuo Jiaxing
To help debugging efforts, print the device SAS address for v3 hw erroneous completion log. Here is an example print: hisi_sas_v3_hw 0000:b4:02.0: erroneous completion iptt=2193 task=000000002b0c13f8 dev id=17 addr=570fd45f9d17b001 Link: https://lore.kernel.org/r/1617709711-195853-3-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Delete some unused callbacksLuo Jiaxing
The debugfs code has been relocated to v3 hw driver, so delete unused struct hisi_sas_hw function pointers snapshot_{prepare, restore}. Link: https://lore.kernel.org/r/1617709711-195853-2-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm8001: Clean up open bracesLuo Jiaxing
checkpatch reports the following: ERROR: that open brace { should be on the previous line +static struct error_fw flash_error_table[] = +{ Fix a couple of instances of misplaced open bracket. Link: https://lore.kernel.org/r/1617886593-36421-3-git-send-email-luojiaxing@huawei.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm8001: Clean up white spaceLuo Jiaxing
checkpatch reports the following: ERROR: space prohibited before that ',' (ctx:WxW) +int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb); Remove unnecessary whitespace. Link: https://lore.kernel.org/r/1617886593-36421-2-git-send-email-luojiaxing@huawei.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Fix potential infinite loopColin Ian King
The for-loop iterates with a u8 loop counter i and compares this with the loop upper limit of pm8001_ha->max_q_num which is a u32 type. There is a potential infinite loop if pm8001_ha->max_q_num is larger than the u8 loop counter. Fix this by making the loop counter the same type as pm8001_ha->max_q_num. [mkp: this is purely theoretical, max_q_num is currently limited to 64] Link: https://lore.kernel.org/r/20210407135840.494747-1-colin.king@canonical.com Fixes: 65df7d1986a1 ("scsi: pm80xx: Fix chip initialization failure") Addresses-Coverity: ("Infinite loop") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Remove busy wait from mpi_uninit_check()Igor Pylypiv
mpi_uninit_check() is not being called in an atomic context. The only caller of mpi_uninit_check() is pm80xx_chip_soft_rst(). Callers of pm80xx_chip_soft_rst(): - pm8001_ioctl_soft_reset() - pm8001_pci_probe() - pm8001_pci_remove() - pm8001_pci_suspend() - pm8001_pci_resume() There was a similar fix for mpi_init_check() in commit d71023af4bec ("scsi: pm80xx: Do not busy wait in MPI init check") Link: https://lore.kernel.org/r/20210406180534.1924345-3-ipylypiv@google.com Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check()Igor Pylypiv
The mpi_uninit_check() takes longer for inbound doorbell register to be cleared. Increase the timeout substantially so that the driver does not fail to load. Previously, the inbound doorbell wait time was mistakenly increased in the mpi_init_check() instead of mpi_uninit_check(). It is okay to leave the mpi_init_check() wait time as-is as these are timeout values and if there is a failure, waiting longer is not an issue. Link: https://lore.kernel.org/r/20210406180534.1924345-2-ipylypiv@google.com Fixes: e90e236250e9 ("scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check") Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Make data_pages_per_blk changeable via configfsBodo Stroesser
Make data_pages_per_blk changeable similar to the way it is done for max_data_area_mb. One can change the value by typing: echo "data_pages_per_blk=N" >control The value is printed when doing: cat info In addition, a new readonly attribute 'data_pages_per_blk' returns the value on read. Link: https://lore.kernel.org/r/20210324195758.2021-7-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Replace block size definitions with new udev membersBodo Stroesser
Replace DATA_PAGES_PER_BLK and DATA_BLOCK_SIZE with new struct elements tcmu_dev->data_pages_per_blk and tcmu_dev->data_blk_size. These new variables are still loaded with constant definition DATA_PAGES_PER_BLK_DEF (= 1) and DATA_PAGES_PER_BLK_DEF * PAGE_SIZE. There is no way yet to set the values via configfs. Link: https://lore.kernel.org/r/20210324195758.2021-6-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Remove function tcmu_get_block_page()Bodo Stroesser
There is only one caller of tcmu_get_block_page left. Since it is a one-liner, we can remove the function. Link: https://lore.kernel.org/r/20210324195758.2021-5-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Support DATA_BLOCK_SIZE = N * PAGE_SIZEBodo Stroesser
Change tcmu to support DATA_BLOCK_SIZE being a multiple of PAGE_SIZE. There are two reasons why one would like to have a bigger DATA_BLOCK_SIZE: 1) If userspace - e.g. due to data compression, encryption or deduplication - needs to have receive or transmit data in a consecutive buffer, we can define DATA_BLOCK_SIZE to the maximum size of a SCSI READ/WRITE to enforce that userspace sees just one consecutive buffer. That way we can avoid the need for doing data copy in userspace. 2) Using a bigger data block size can speed up command processing in tcmu. The number of free data blocks to look up in bitmap is reduced substantially. The lookup for data pages in radix_tree can be done more efficiently if there are multiple pages in a data block. The maximum number of IOVs to set up is lower so cmd entries in the ring become smaller. Link: https://lore.kernel.org/r/20210324195758.2021-4-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Prepare for PAGE_SIZE != DATA_BLOCK_SIZEBodo Stroesser
Rename some variables and definitions as a first preparation for DATA_BLOCK_SIZE != PAGE_SIZE and add the new DATA_PAGES_PER_BLK definition containing the number of pages per data block. Rename tcmu_try_get_block_page() to tcmu_try_get_data_page(). Keep name tcmu_get_block_page() since it will go away in a following commit when there is only one caller left. Subsequent commits will then add full support for DATA_PAGES_PER_BLK != 1, which also means DATA_BLOCK_SIZE = DATA_PAGES_PER_BLK * PAGE_SIZE Link: https://lore.kernel.org/r/20210324195758.2021-3-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Adjust names of variables and definitionsBodo Stroesser
Some definitions and members of struct tcmu_dev had misleading names. Examples: - ring_size was used for the size of mailbox + cmd ring + data area - CMDR_SIZE was used for size of mailbox + cmd ring I added the new definition MB_CMDR_SIZE (mailbox + command ring), changed CMDR_SIZE to hold the size of the command ring only and replaced in struct tcmu_dev the member ring_size with mmap_pages, because the member is now used in tcmu_mmap() only, where we need page count, not size. I also added the new struct tcmu_dev member 'cmdr' which is used to replace some occurences of '(void *)mb + CMDR_OFF' with 'udev->cmdr' for better readability. Link: https://lore.kernel.org/r/20210324195758.2021-2-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12MAINTAINERS: add MT7621 CLOCK maintainerSergio Paracuellos
Adding myself as maintainer for mt7621 clock driver. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210410055059.13518-5-sergio.paracuellos@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-12staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk'Sergio Paracuellos
Vendor listed for mediatek in kernel vendor file 'vendor-prefixes.yaml' contains 'mediatek' as a valid vendor string. Some nodes in the device tree are using an invalid vendor string vfor 'mtk' instead. Fix all of them in dts file. Update also ralink mt7621 related code to properly match new strings. Even there are used in the device tree there are some strings that are not referred anywhere but have been also updated with new vendor name. These are 'mtk,mt7621-wdt', 'mtk,mt7621-nand', 'mtk,mt7621-mc', and 'mtk,mt7621-cpc'. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210410055059.13518-4-sergio.paracuellos@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-12staging: mt7621-dts: make use of new 'mt7621-clk'Sergio Paracuellos
Clocks for SoC mt7621 have been properly integrated so there is no need to declare fixed clocks at all in the device tree. Remove all of them, add new device tree nodes for mt7621-clk and update the rest of the nodes to use them. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210410055059.13518-3-sergio.paracuellos@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-12clk: ralink: add clock driver for mt7621 SoCSergio Paracuellos
The documentation for this SOC only talks about two registers regarding to the clocks: * SYSC_REG_CPLL_CLKCFG0 - provides some information about boostrapped refclock. PLL and dividers used for CPU and some sort of BUS. * SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable clocks for all or some ip cores. Looking into driver code, and some openWRT patched there are another frequencies which are used in some drivers (uart, sd...). According to all of this information the clock plan for this SoC is set as follows: - Main top clock "xtal" from where all the rest of the world is derived. - CPU clock "cpu" derived from "xtal" frequencies and a bunch of register reads and predividers. - BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz. - Fixed clocks from "xtal": * "50m": 50 MHz. * "125m": 125 MHz. * "150m": 150 MHz. * "250m": 250 MHz. * "270m": 270 MHz. We also have a buch of gate clocks with their parents: * "hsdma": "150m" * "fe": "250m" * "sp_divtx": "270m" * "timer": "50m" * "pcm": "270m" * "pio": "50m" * "gdma": "bus" * "nand": "125m" * "i2c": "50m" * "i2s": "270m" * "spi": "bus" * "uart1": "50m" * "uart2": "50m" * "uart3": "50m" * "eth": "50m" * "pcie0": "125m" * "pcie1": "125m" * "pcie2": "125m" * "crypto": "250m" * "shxc": "50m" With this information the clk driver will provide clock and gates functionality from a a set of hardcoded clocks allowing to define a nice device tree without fixed clocks. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210410055059.13518-2-sergio.paracuellos@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-12clk: uniphier: Fix potential infinite loopColin Ian King
The for-loop iterates with a u8 loop counter i and compares this with the loop upper limit of num_parents that is an int type. There is a potential infinite loop if num_parents is larger than the u8 loop counter. Fix this by making the loop counter the same type as num_parents. Also make num_parents an unsigned int to match the return type of the call to clk_hw_get_num_parents. Addresses-Coverity: ("Infinite loop") Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210409090104.629722-1-colin.king@canonical.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-12Merge branch '5.12/scsi-fixes' into 5.13/scsi-stagingMartin K. Petersen
Resolve a couple of conflicts between the 5.12 fixes branch and the 5.13 staging tree (iSCSI target and UFS). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12clk: qcom: rpmh: add support for SDX55 rpmh IPA clockAlex Elder
The IPA core clock is required for SDX55. Define it. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210409134407.841137-1-elder@linaro.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-04-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix NAT IPv6 offload in the flowtable. 2) icmpv6 is printed as unknown in /proc/net/nf_conntrack. 3) Use div64_u64() in nft_limit, from Eric Dumazet. 4) Use pre_exit to unregister ebtables and arptables hooks, from Florian Westphal. 5) Fix out-of-bound memset in x_tables compat match/target, also from Florian. 6) Clone set elements expression to ensure proper initialization. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13netfilter: nftables: clone set element expression templatePablo Neira Ayuso
memcpy() breaks when using connlimit in set elements. Use nft_expr_clone() to initialize the connlimit expression list, otherwise connlimit garbage collector crashes when walking on the list head copy. [ 493.064656] Workqueue: events_power_efficient nft_rhash_gc [nf_tables] [ 493.064685] RIP: 0010:find_or_evict+0x5a/0x90 [nf_conncount] [ 493.064694] Code: 2b 43 40 83 f8 01 77 0d 48 c7 c0 f5 ff ff ff 44 39 63 3c 75 df 83 6d 18 01 48 8b 43 08 48 89 de 48 8b 13 48 8b 3d ee 2f 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 03 48 83 [ 493.064699] RSP: 0018:ffffc90000417dc0 EFLAGS: 00010297 [ 493.064704] RAX: 0000000000000000 RBX: ffff888134f38410 RCX: 0000000000000000 [ 493.064708] RDX: 0000000000000000 RSI: ffff888134f38410 RDI: ffff888100060cc0 [ 493.064711] RBP: ffff88812ce594a8 R08: ffff888134f38438 R09: 00000000ebb9025c [ 493.064714] R10: ffffffff8219f838 R11: 0000000000000017 R12: 0000000000000001 [ 493.064718] R13: ffffffff82146740 R14: ffff888134f38410 R15: 0000000000000000 [ 493.064721] FS: 0000000000000000(0000) GS:ffff88840e440000(0000) knlGS:0000000000000000 [ 493.064725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 493.064729] CR2: 0000000000000008 CR3: 00000001330aa002 CR4: 00000000001706e0 [ 493.064733] Call Trace: [ 493.064737] nf_conncount_gc_list+0x8f/0x150 [nf_conncount] [ 493.064746] nft_rhash_gc+0x106/0x390 [nf_tables] Reported-by: Laura Garcia Liebana <nevola@gmail.com> Fixes: 409444522976 ("netfilter: nf_tables: add elements with stateful expressions") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-04-13netfilter: x_tables: fix compat match/target pad out-of-bound writeFlorian Westphal
xt_compat_match/target_from_user doesn't check that zeroing the area to start of next rule won't write past end of allocated ruleset blob. Remove this code and zero the entire blob beforehand. Reported-by: syzbot+cfc0247ac173f597aaaa@syzkaller.appspotmail.com Reported-by: Andy Nguyen <theflow@google.com> Fixes: 9fa492cdc160c ("[NETFILTER]: x_tables: simplify compat API") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-04-12ethtool: fix kdoc attr nameJakub Kicinski
Add missing 't' in attrtype. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12cgroup/cpuset: fix typos in commentsLu Jialin
Change hierachy to hierarchy and unrechable to unreachable, no functionality changed. Signed-off-by: Lu Jialin <lujialin4@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-04-12net: phy: marvell: fix detection of PHY on Topaz switchesPali Rohár
Since commit fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading"), Linux reports the temperature of Topaz hwmon as constant -75°C. This is because switches from the Topaz family (88E6141 / 88E6341) have the address of the temperature sensor register different from Peridot. This address is instead compatible with 88E1510 PHYs, as was used for Topaz before the above mentioned commit. Create a new mapping table between switch family and PHY ID for families which don't have a model number. And define PHY IDs for Topaz and Peridot families. Create a new PHY ID and a new PHY driver for Topaz's internal PHY. The only difference from Peridot's PHY driver is the HWMON probing method. Prior this change Topaz's internal PHY is detected by kernel as: PHY [...] driver [Marvell 88E6390] (irq=63) And afterwards as: PHY [...] driver [Marvell 88E6341 Family] (irq=63) Signed-off-by: Pali Rohár <pali@kernel.org> BugLink: https://github.com/globalscaletechnologies/linux/issues/1 Fixes: fee2d546414d ("net: phy: marvell: mv88e6390 temperature sensor reading") Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12mt76: mt7921: add rcu section in mt7921_mcu_tx_rate_reportLorenzo Bianconi
Introduce rcu section in mt7921_mcu_tx_rate_report before dereferencing wcid pointer otherwise loockdep will report the following issue: [ 115.245740] ============================= [ 115.245754] WARNING: suspicious RCU usage [ 115.245771] 5.10.20 #0 Not tainted [ 115.245784] ----------------------------- [ 115.245816] other info that might help us debug this: [ 115.245830] rcu_scheduler_active = 2, debug_locks = 1 [ 115.245845] 3 locks held by kworker/u4:1/20: [ 115.245858] #0: ffffff80065ab138 ((wq_completion)phy0){+.+.}-{0:0}, at: process_one_work+0x1f8/0x6b8 [ 115.245948] #1: ffffffc01198bdd8 ((work_completion)(&(&dev->mphy.mac_work)->work)){+.+.}-{0:0}, at: process_one_8 [ 115.246027] #2: ffffff8006543ce8 (&dev->mutex#2){+.+.}-{3:3}, at: mt7921_mac_work+0x60/0x2b0 [mt7921e] [ 115.246125] [ 115.246125] stack backtrace: [ 115.246142] CPU: 1 PID: 20 Comm: kworker/u4:1 Not tainted 5.10.20 #0 [ 115.246152] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 115.246168] Workqueue: phy0 mt7921_mac_work [mt7921e] [ 115.246188] Call trace: [ 115.246201] dump_backtrace+0x0/0x1a8 [ 115.246213] show_stack+0x14/0x30 [ 115.246228] dump_stack+0xec/0x134 [ 115.246240] lockdep_rcu_suspicious+0xcc/0xdc [ 115.246255] mt7921_get_wtbl_info+0x2a4/0x310 [mt7921e] [ 115.246269] mt7921_mac_work+0x284/0x2b0 [mt7921e] [ 115.246281] process_one_work+0x2a0/0x6b8 [ 115.246293] worker_thread+0x40/0x440 [ 115.246305] kthread+0x144/0x148 [ 115.246317] ret_from_fork+0x10/0x18 Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12net: ethernet: ravb: Enable optional refclkAdam Ford
For devices that use a programmable clock for the AVB reference clock, the driver may need to enable them. Add code to find the optional clock and enable it when available. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12dt-bindings: net: renesas,etheravb: Add additional clocksAdam Ford
The AVB driver assumes there is an external crystal, but it could be clocked by other means. In order to enable a programmable clock, it needs to be added to the clocks list and enabled in the driver. Since there currently only one clock, there is no clock-names list either. Update bindings to add the additional optional clock, and explicitly name both of them. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-12mt76: mt7921: introduce MCU_EVENT_LP_INFO event parsingLorenzo Bianconi
Report trace event related to MCU_EVENT_LP_INFO that is sent by the mcu when it is ready to enter in deep sleep state Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: always add rx header translation tlv when adding stationsFelix Fietkau
Ensures that header translation is disabled for interfaces that do not support it. Fixes: d4b98c63d7a7 ("mt76: mt7615: add support for rx decapsulation offload") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7615: add missing SPDX tag in mmio.cRyder Lee
Resolve the following checkpatch.pl script warning: WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7915: add mmio.cRyder Lee
Add mmio.c in order to use mt76_bus_ops throughout the driver. It will be also shared with the future APSoC revision. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: report Rx timestampRyder Lee
Frame reception timestamp (low 32-bits) that indicates the value of the local TSF timer value at the time the first bit of the MAC header in the received frame (PPDU unit) arriving at the MAC. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-12mt76: mt7921: remove 80+80 MHz support capabilitiesFelix Fietkau
This mode is not supported by the hardware Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-28 19:42:06 +0000