summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-08Merge branch 'qdisc-RED-offload'David S. Miller
Jiri Pirko says: ==================== qdisc RED offload Nogah says: Add an offload support for RED qdisc for mlxsw driver. The first patch adds the ability to offload RED qdisc by using ndo_setup_tc. It gives RED three commands, to offload, change or delete the qdisc, to get the qdisc generic stats and to get it's RED xstats. There is no enforcement on a driver to offload or not offload the qdisc and it is up to the driver to decide. RED qdisc is first being created and only later graft to a parent (unless it is a root qdisc). For that reason the return value of the offload replace command that is called in the init process doesn't reflect actual offload state. The offload state is determined in the dump function so it can be reflected to the user. This function is also responsible for stats update. The patchses 2-3 change the name of TC_SETUP_MQPRIO & TC_SETUP_CBS to match with the new convention of QDISC prefix. The rest of the patchset is driver support for the qdisc. Currently only as root qdisc that is being set on the default traffic class. It supports only the following parameters of RED: min, max, probability and ECN mode. Limit and burst size related params are being ignored at this moment. --- v7->v8 internal: (external RFC->v1) - patch 1/9: - unite the offload and un-offload functions - clean the OFFLOAD flag when the qdisc in not offloaded - patch 2/9: - minor change to avoid a conflict - patch 5/9: - check for bad min/max values - clean the offloaded qdisc after a bad config call ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08mlxsw: spectrum: Support general qdisc statsNogah Frankel
Add support for ndo_setup_tc with enum tc_setup_type value of TC_SETUP_QDISC_STATS. This call updates the generic qdisc stats from the cache if the handle ID that is asked for matching the root qdisc ID and fails otherwise. Currently doesn't support qlen and rqueues. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08mlxsw: spectrum: Support RED xstatsNogah Frankel
Add support for ndo_setup_tc with enum tc_setup_type value of TC_SETUP_RED_XSTATS. This call returns the RED qdisc xstats from the cache if the handle ID that is asked for matching the root qdisc ID and fails otherwise. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08mlxsw: spectrum: Collect tclass related stats periodicallyNogah Frankel
Add more statistics to be collected from the HW periodically. These stats are tclass based (beside ECN marked packet, that exist only port based). They are needed to expose RED qdisc stats and xstats correctly. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08mlxsw: reg: Add ext and tc-cong counter groupsYuval Mintz
This adds the counter group definitions for 2 new counter groups which are necessary for gaining ECN & wred counters. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08mlxsw: spectrum: Support RED qdisc offloadNogah Frankel
Add support for ndo_setup_tc with enum tc_setup_type value of TC_SETUP_RED. This call sets RED qdisc on a traffic class. This patch supports RED qdisc only as a root qdisc and set in on the default tclass. It can be set with or without ECN. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08mlxsw: reg: Add cwtp & cwtpm registersNogah Frankel
This patch adds 2 new registers: - Congestion WRED ECN TClass Profile Register [CWTP] - Congestion WRED ECN TClass and Pool Mapping Register [CWTPM] These registers would later be needed to offload RED-related functionality to the HW. Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08net_sch: cbs: Change TC_SETUP_CBS to TC_SETUP_QDISC_CBSNogah Frankel
Change TC_SETUP_CBS to TC_SETUP_QDISC_CBS to match the new convention.. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08net_sch: mqprio: Change TC_SETUP_MQPRIO to TC_SETUP_QDISC_MQPRIONogah Frankel
Change TC_SETUP_MQPRIO to TC_SETUP_QDISC_MQPRIO to match the new convention. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08net_sch: red: Add offload ability to RED qdiscNogah Frankel
Add the ability to offload RED qdisc by using ndo_setup_tc. There are four commands for RED offloading: * TC_RED_SET: handles set and change. * TC_RED_DESTROY: handle qdisc destroy. * TC_RED_STATS: update the qdiscs counters (given as reference) * TC_RED_XSTAT: returns red xstats. Whether RED is being offloaded is being determined every time dump action is being called because parent change of this qdisc could change its offload state but doesn't require any RED function to be called. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08bpf: Rename tcp_bbf.readme to tcp_bpf.readmeLawrence Brakmo
The original patch had the wrong filename. Fixes: bfdf75693875 ("bpf: create samples/bpf/tcp_bpf.readme") Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08bonding: discard lowest hash bit for 802.3ad layer3+4Hangbin Liu
After commit 07f4c90062f8 ("tcp/dccp: try to not exhaust ip_local_port_range in connect()"), we will try to use even ports for connect(). Then if an application (seen clearly with iperf) opens multiple streams to the same destination IP and port, each stream will be given an even source port. So the bonding driver's simple xmit_hash_policy based on layer3+4 addressing will always hash all these streams to the same interface. And the total throughput will limited to a single slave. Change the tcp code will impact the whole tcp behavior, only for bonding usage. Paolo Abeni suggested fix this by changing the bonding code only, which should be more reasonable, and less impact. Fix this by discarding the lowest hash bit because it contains little entropy. After the fix we can re-balance between slaves. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08Merge branch 'ila-make-identifier-format-optional-and-other-fixes'David S. Miller
Tom Herbert says: ==================== ila: make identifier format optional and other fixes The identifier type and checksum neutral mapping bits are optional in identifier formats. This patch set fixes the implementation to make them optional and configurable. Specific items: - Clean up checksum diff code in ILA - Add checksum neutral mapping auto so that checksum neutral mapping can be configured without requiring use of the C-bit - Add identifier type configuration and allow identifier type to be configured so that the identifier type field does not need to be present - Added ILA documention: ila.txt I have fixes for ILA in iproute2 that will be poseted separately. Tested: Ran netperf TCP_RR on various combinations of checksum mode and the two supported identifier types. v2: - Add proper sign off - In ILA LWT, only check prefix length includes identifier type if identifier type is enabled (ILA_ATYPE_USE_FORMAT). - Add a hook type so that it can be specified whether ILA translation is done on input or output route funciton in LWT. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08ila: Add ila.txtTom Herbert
Add documenation for kernel ILA. This describes ILA, features, configuration gives some examples. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08ila: Add a hook type for LWT routesTom Herbert
In LWT tunnels both an input and output route method is defined. If both of these are executed in the same path then double translation happens and the effect is not correct. This patch adds a new attribute that indicates the hook type. Two values are defined for route output and route output. ILA translation is only done for the one that is set. The default is to enable ILA on route output. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08ila: allow configuration of identifier typeTom Herbert
Allow identifier to be explicitly configured for a mapping. This can either be one of the identifier types specified in the ILA draft or a value of ILA_ATYPE_USE_FORMAT which means the identifier type is inferred from the identifier type field. If a value other than ILA_ATYPE_USE_FORMAT is set for a mapping then it is assumed that the identifier type field is not present in an identifier. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08ila: add checksum neutral map autoTom Herbert
Add checksum neutral auto that performs checksum neutral mapping without using the C-bit. This is enabled by configuration of a mapping. The checksum neutral function has been split into ila_csum_do_neutral_fmt and ila_csum_do_neutral_nofmt. The former handles the C-bit and includes it in the adjustment value. The latter just sets the adjustment value on the locator diff only. Added configuration for checksum neutral map aut in ila_lwt and ila_xlat. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08ila: cleanup checksum diffTom Herbert
Consolidate computing checksum diff into one function. Add get_csum_diff_iaddr that computes the checksum diff between an address argument and locator being written. get_csum_diff calls this using the destination address in the IP header as the argument. Also moved ila_init_saved_csum to be close to the checksum diff functions. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-07Input: st1232 - remove obsolete platform device supportGeert Uytterhoeven
Commit 1fa59bda21c7fa36 ("ARM: shmobile: Remove legacy board code for Armadillo-800 EVA"), removed the last user of st1232_pdata and the "st1232-ts" platform device. All remaining users use DT. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-07Merge tag 'v4.14-rc8' into nextDmitry Torokhov
Merge with mainline to bring in SPDX markings to avoid annoying merge problems when some header files get deleted.
2017-11-07Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3Yiannis Marangos
Some Synaptics devices, such as LEN0073, use SMBUS version 3. Signed-off-by: Yiannis Marangos <yiannis.marangos@gmail.com> Acked-by: Benjamin Tissoires <benjamion.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-07Input: tsc200x-core - set INPUT_PROP_DIRECTMartin Kepplinger
If INPUT_PROP_DIRECT is set, userspace doesn't have to fall back to old ways of identifying touchscreen devices. In order to identify a touchscreen device, Android for example, seems to already depend on INPUT_PROP_DIRECT to be present in drivers. udev still checks for either BTN_TOUCH or INPUT_PROP_DIRECT. Checking for BTN_TOUCH however can quite easily lead to false positives; it's a code that not only touchscreen device drivers use. According to the documentation, touchscreen drivers should have this property set and in order to make life easy for userspace, let's set it. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-07Input: elan_i2c - add ELAN060C to the ACPI tableKai-Heng Feng
ELAN060C touchpad uses elan_i2c as its driver. It can be found on Lenovo ideapad 320-14AST. BugLink: https://bugs.launchpad.net/bugs/1727544 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-08net/mlx5e/core/en_fs: fix pointer dereference after free in ↵Gustavo A. R. Silva
mlx5e_execute_l2_action hn is being kfree'd in mlx5e_del_l2_from_hash and then dereferenced by accessing hn->ai.addr Fix this by copying the MAC address into a local variable for its safe use in all possible execution paths within function mlx5e_execute_l2_action. Addresses-Coverity-ID: 1417789 Fixes: eeb66cdb6826 ("net/mlx5: Separate between E-Switch and MPFS") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08xdp: Sample xdp program implementing ip forwardChristina Jacob
Implements port to port forwarding with route table and arp table lookup for ipv4 packets using bpf_redirect helper function and lpm_trie map. Signed-off-by: Christina Jacob <Christina.Jacob@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08net: fec: Let fec_ptp have its own interrupt routineTroy Kisky
This is better for code locality and should slightly speed up normal interrupts. This also allows PPS clock output to start working for i.mx7. This is because i.mx7 was already using the limit of 3 interrupts, and needed another. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08net: mvpp2: Prevent userspace from changing TX affinitiesMarc Zyngier
The mvpp2 driver can't cope at all with the TX affinities being changed from userspace, and spit an endless stream of [ 91.779920] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing [ 91.779930] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing [ 91.780402] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing [ 91.780406] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing [ 91.780415] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing [ 91.780418] mvpp2 f4000000.ethernet eth2: wrong cpu on the end of Tx processing rendering the box completely useless (I've measured around 600k interrupts/s on a 8040 box) once irqbalance kicks in and start doing its job. Obviously, the driver was never designed with this in mind. So let's work around the problem by preventing userspace from interacting with these interrupts altogether. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08Merge branch 'hv_netvsc-fix-a-hang-on-channel-mtu-changes'David S. Miller
Vitaly Kuznetsov says: ==================== hv_netvsc: fix a hang on channel/mtu changes It was found that netvsc driver doesn't survive e.g. test. I was able to identify a hang in guest/host communication, it is fixed by PATCH1 of this series. PATCH2 is a cosmetic change masking unneeded messages. Changes since v1: - Throw away patches 2 and 3 of the original series as one is unneeded and the other is not justified [Eric Dumazet, Stephen Hemminger] so I'm only fixing the hang now, the crash doesn't reproduce. Will keep an eye on it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08hv_netvsc: hide warnings about uninitialized/missing rndis deviceVitaly Kuznetsov
Hyper-V hosts are known to send RNDIS messages even after we halt the device in rndis_filter_halt_device(). Remove user visible messages as they are not really useful. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08hv_netvsc: netvsc_teardown_gpadl() splitVitaly Kuznetsov
It was found that in some cases host refuses to teardown GPADL for send/ receive buffers (probably when some work with these buffere is scheduled or ongoing). Change the teardown logic to be: 1) Send NVSP_MSG1_TYPE_REVOKE_* messages 2) Close the channel 3) Teardown GPADLs. This seems to work reliably. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08net: phy: leds: Add support for "link" triggerMaciej S. Szmigiero
Currently, we create a LED trigger for any link speed known to a PHY. These triggers only fire when their exact link speed had been negotiated (they aren't cumulative, that is, they don't fire for "their or any higher" link speed). What we are missing, however, is a trigger which will fire on any link speed known to the PHY. Such trigger can then be used for implementing a poor man's substitute of the "link" LED on boards that lack it. Let's add it. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08net: phy: leds: Refactor "no link" handler into a separate functionMaciej S. Szmigiero
Currently, phy_led_trigger_change_speed() is handling a "no link" condition like it was some kind of an error (using "goto" to a code at the function end). However, having no link at PHY is an ordinary operational state, so let's handle it in an appropriately named separate function so it is more obvious what the code is doing. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-07MAINTAINERS: Remove Gabriele Paoloni as HiSilicon PCI maintainerGabriele Paoloni
Gabriele is now moving to a different role, so remove him as HiSilicon PCI maintainer. Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> [bhelgaas: Thanks for all your help, Gabriele, and best wishes!] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
2017-11-07MAINTAINERS: Remove Stephen Bates as Microsemi Switchtec maintainerSebastian Andrzej Siewior
Just sent an email there and received an autoreply because he no longer works there. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-11-08PM / Domains: Remove gpd_dev_ops.active_wakeup() callbackGeert Uytterhoeven
There are no more users left of the gpd_dev_ops.active_wakeup() callback. All have been converted to GENPD_FLAG_ACTIVE_WAKEUP. Hence remove the callback. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-08soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUPGeert Uytterhoeven
Set the newly introduced GENPD_FLAG_ACTIVE_WAKEUP, which allows to remove the driver's own flag-based callback. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-08soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUPGeert Uytterhoeven
Set the newly introduced GENPD_FLAG_ACTIVE_WAKEUP, which allows to remove the driver's own flag-based callback. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-08ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUPGeert Uytterhoeven
Set the newly introduced GENPD_FLAG_ACTIVE_WAKEUP, which allows to remove the driver's own "always true" callback. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-08PM / Domains: Allow genpd users to specify default active wakeup behaviorGeert Uytterhoeven
It is quite common for PM Domains to require slave devices to be kept active during system suspend if they are to be used as wakeup sources. To enable this, currently each PM Domain or driver has to provide its own gpd_dev_ops.active_wakeup() callback. Introduce a new flag GENPD_FLAG_ACTIVE_WAKEUP to consolidate this. If specified, all slave devices configured as wakeup sources will be kept active during system suspend. PM Domains that need more fine-grained controls, based on the slave device, can still provide their own callbacks, as before. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-11-07MIPS: BCM47XX: Fix LED inversion for WRT54GSv1Mirko Parthey
The WLAN LED on the Linksys WRT54GSv1 is active low, but the software treats it as active high. Fix the inverted logic. Fixes: 7bb26b169116 ("MIPS: BCM47xx: Fix LEDs on WRT54GS V1.0") Signed-off-by: Mirko Parthey <mirko.parthey@web.de> Looks-ok-by: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.17+ Patchwork: https://patchwork.linux-mips.org/patch/16071/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07MIPS: Lantiq: Fix ASC0/ASC1 clocksMartin Schiller
ASC1 is available on every Lantiq SoC (also AmazonSE) and should be enabled like the other generic xway clocks instead of ASC0, which is only available for AR9 and Danube. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: John Crispin <john@phrozen.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Felix Fietkau <nbd@nbd.name> Cc: Martin Schiller <ms@dev.tdt.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16145/ [jhogan@kernel.org: Drop braces] Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07MIPS: BMIPS: Fix missing cbr addressJaedon Shin
Fix NULL pointer access in BMIPS3300 RAC flush. Fixes: 738a3f79027b ("MIPS: BMIPS: Add early CPU initialization code") Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.7+ Patchwork: https://patchwork.linux-mips.org/patch/16423/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07MIPS: Standardize DTS files, status "ok" -> "okay"Robert P. J. Day
While the current kernel code in drivers/of/ allows developers to be sloppy and use the status value "ok", the current DTSpec 0.1 makes it clear that the only officially proper spelling is "okay", so adjust the very small number of DTS files under arch/mips/. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17227/ Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07resource: Fix resource_size.cocci warningskbuild test robot
arch/x86/kernel/crash.c:627:34-37: ERROR: Missing resource_size with res arch/x86/kernel/crash.c:528:16-19: ERROR: Missing resource_size with res Use resource_size function on resource object instead of explicit computation. Generated by: scripts/coccinelle/api/resource_size.cocci Fixes: 1d2e733b13b4 ("resource: Provide resource struct in resource walk callback") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Juergen Gross <jgross@suse.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: kbuild-all@01.org Cc: tipbuild@zytor.com Cc: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20171107191801.GA91887@lkp-snb01
2017-11-07MIPS: BCM63XX: split out swpkt_sar/usb clocksJonas Gorski
Make the secondary switch clocks their own clocks. This allows proper enable reference counting between SAR/XTM and the main switch clocks, and controlling them individually from drivers. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-mips@linux-mips.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/17332/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07MIPS: BCM63XX: provide enet clocks as "enet" to the ethernet devicesJonas Gorski
Add lookups to provide the appropriate enetX clocks as just "enet" to the ethernet devices. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-mips@linux-mips.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/17331/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07MIPS: BCM63XX: move the HSSPI PLL HZ into its own clockJonas Gorski
Split up the HSSPL clock into rate and a gate clock, to more closely match the actual hardware. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-mips@linux-mips.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/17330/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07MIPS: BMIPS: name the refclk clock for uartJonas Gorski
Add the clock name to the uart nodes, to name the input clock properly. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-mips@linux-mips.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/17329/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07tty/bcm63xx_uart: allow naming clock in device treeJonas Gorski
Codify using a named clock for the refclk of the uart. This makes it easier if we might need to add a gating clock (like present on the BCM6345). Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-mips@linux-mips.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/17328/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org>
2017-11-07tty/bcm63xx_uart: use refclk for the expected clock nameJonas Gorski
We now have the clock available under refclk, so use that. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-mips@linux-mips.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Patchwork: https://patchwork.linux-mips.org/patch/17327/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Hogan <jhogan@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-19 04:17:29 +0000