summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-17ARM: add SCHED_HRTICK config optionRussell King
As we don't include kernel/Kconfig.hz as this defines HZ values unsuitable for ARM platforms, add the SCHED_HRTICK to properly configure the scheduler for hrtimer operation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-17Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq / intel_pstate: Add kernel command line option disable intel_pstate. cpufreq / intel_pstate: Change to disallow module build
2013-02-17pwm: twl: Use to_twl() instead of container_of()Johannes Thumshirn
Always use to_twl() for converting into private data instead of container_of(). Signed-off-by: Johannes Thumshirn <morbidrsa@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-02-17openrisc: really pass correct arg to schedule_tailJonas Bonn
Commit 287ad220cd8b5a9d29f71c78f6e4051093f051fc tried to set up the argument to schedule_tail, but ended up using TI_STACK which isn't a defined symbol. Sadly, the old openrisc compiler silently ignores this fact and it was first discovered now when building with an updated toolchain. Reported-by: Christian Svensson <blue@cmd.nu> Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-02-17Add bitops include needed for ext2 filesystemSebastian Macke
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2013-02-17openrisc: update DTLB-miss handler lastJonas Bonn
The self-modifying code that updates the TLB handler at start-up has a subtle ordering requirement: the DTLB handler must be the last thing changed. What I was seeing was the following: i) The DTLB handler was updated ii) The following printk caused a TLB miss and the look-up resulted in the page containing itlb_vector (0xc0000a00) being bounced from the TLB. iii) The subsequent access to itlb_vector caused a TLB miss and reload of the page containing itlb_vector from the page tables. iv) But this reload of the page in iii) was being done by the "new" DTLB-miss handler which resulted (correctly) in the page flags being set to read-only; the subsequent write-access to itlb_vector thus resulted in a page (access) fault. This is easily remedied if we ensure that the boot-time DTLB-miss handler continues running until the very last bit of self-modifying code has been executed. This patch should ensure that the very last thing updated is the DTLB-handler itself. Signed-off-by: Jonas Bonn <jonas@southpole.se> Acked-by: Julius Baxter <juliusbaxter@gmail.com> Tested-by: Sebastian Macke <sebastian@macke.de>
2013-02-16Input: cyttsp-spi - remove duplicate MODULE_ALIAS()Dmitry Torokhov
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-16Input: tsc2005 - add MODULE_ALIASPali Rohár
This enables autoloading of tsc2005 driver when is compiled as a module. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-17MIPS: ath79: use dynamically allocated USB platform devicesGabor Juhos
The current code uses static resources and static platform device instances for the possible USB controllers in the system. These static variables contains initial values which leads to data segment pollution. Remove the static variables and use dynamically allocated structures instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4933/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17ath79: remove ATH79_MISC_IRQ_* definesGabor Juhos
Use the ATH79_MISC_IRQ() macro instead. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4930/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17ath79: add ATH79_CPU_IRQ() macroGabor Juhos
Remove the individual ATH79_CPU_IRQ_* constants and use the new macro instead of those. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4929/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: pci-ar71xx: move irq base to the controller structureGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4928/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: pci-ar71xx: remove static PCI IO/MEM resourcesGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4927/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: pci-ar71xx: use dynamically allocated PCI controller structureGabor Juhos
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4926/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: pci-ar724x: setup command register of the PCI controllerGabor Juhos
The command register of the PCI controller is not initialized correctly by the bootloader on some boards and this leads to non working PCI bus. Add code to initialize the command register from the Linux code to avoid this. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4916/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: pci-ar724x: use per-controller IRQ baseGabor Juhos
Change to the code to use per-controller IRQ base. This is needed for multiple PCI controller support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4915/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: pci-ar724x: remove static PCI IO/MEM resourcesGabor Juhos
Static resources become impractical when multiple PCI controllers are present. Move the resources into the platform device registration code and change the probe routine to get those from there platform device's resources. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4914/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: pci-ar724x: use dynamically allocated PCI controller structureGabor Juhos
The current code uses static variables to store the PCI controller specific data. This works if the system contains one PCI controller only, however it becomes impractical when multiple PCI controllers are present. Move the variables into a dynamically allocated controller specific structure, and use that instead of the static variables. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4912/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: ath79: allow to specify bus number in PCI IRQ mapsGabor Juhos
This is needed for multiple PCI bus support. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4913/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: add dummy pci_load_of_rangesGabor Juhos
The pci_load_of_ranges function is only available if CONFIG_OF is selected. If the function is used without CONFIG_OF being enabled it will cause a build error. Add a dummy inline function to avoid this. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4911/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: avoid possible resource conflict in register_pci_controllerGabor Juhos
The IO and memory resources of a PCI controller might already have a parent resource set when they are passed to 'register_pci_controller'. If the parent resource is set, the request_resource call will fail due to resource conflict and the current code will not be able to register the PCI controller. Use the parent resource if it is available in the request_resource call to avoid the isssue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4910/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: ath79: remove unused ar7{1x,24}x_pcibios_init functionsGabor Juhos
The functions are unused now, so remove them. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4909/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: ath79: register platform devices for the PCI controllersGabor Juhos
The pci-ar71xx and pci-ar724x drivers were converted into platform drivers. Register the corresponding platform devices for the PCI controllers instead of using the ar7{1x,24}x_pcibios_init functions. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4908/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: ath79: move global PCI defines into a common headerGabor Juhos
The constants will be used by a subsequent patch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4907/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: pci-ar71xx: convert into a platform driverGabor Juhos
The patch converts the pci-ar71xx driver into a platform driver. This makes it possible to register the PCI controller as a plain platform device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4906/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: pci-ar724x: convert into a platform driverGabor Juhos
The patch converts the pci-ar724x driver into a platform driver. This makes it possible to register the PCI controller as a plain platform device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4905/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: ralink: add CPU interrupt controller to of_irq_idsGabor Juhos
Convert the ralink IRQ code to make use of the new MIPS IRQ controller OF mappings. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: David Daney <david.daney@cavium.com> Patchwork: http://patchwork.linux-mips.org/patch/4900/
2013-02-17MIPS: add irqdomain support for the CPU IRQ controllerGabor Juhos
Add code to load a irq_domain for the MIPS IRQ controller from a devicetree file. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: David Daney <david.daney@cavium.com> Patchwork: http://patchwork.linux-mips.org/patch/4902/
2013-02-17Document: devicetree: add OF documents for MIPS interrupt controllerJohn Crispin
Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: David Daney <david.daney@cavium.com> Patchwork: http://patchwork.linux-mips.org/patch/4901/
2013-02-17MIPS: ralink: adds default config fileJohn Crispin
Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: ralink: adds Kbuild filesJohn Crispin
Add the Kbuild symbols and Makefiles needed to actually build the ralink code from this series Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4899/
2013-02-17MIPS: ralink: adds rt305x devicetreeJohn Crispin
This adds the devicetree file that describes the rt305x evaluation kit. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4898/
2013-02-17MIPS: ralink: adds support for RT305x SoC familyJohn Crispin
Add support code for rt3050, rt3052, rt3350, rt3352 and rt5350 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4896/
2013-02-17MIPS: ralink: adds early_printk supportJohn Crispin
Add the code needed to make early printk work. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4897/
2013-02-17MIPS: ralink: adds OF codeJohn Crispin
Until there is a generic MIPS way of handing the DTB over from bootloader to kernel we rely on a built in devicetrees. The OF code also remaps those register ranges that we use global in our drivers. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4895/
2013-02-17MIPS: ralink: adds clkdev codeJohn Crispin
These SoCs have a limited number of fixed rate clocks. Add support for the clk and clkdev api. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4894/
2013-02-17MIPS: ralink: adds prom and cmdline codeJohn Crispin
Add minimal code to handle commandlines. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4892/
2013-02-17MIPS: ralink: adds reset codeJohn Crispin
Resetting these SoCs requires no real magic. The code is straight forward. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4891/
2013-02-17MIPS: ralink: adds irq codeJohn Crispin
All of the Ralink Wifi SoC currently supported by this series share the same interrupt controller (INTC). Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4890/
2013-02-17MIPS: ralink: adds include filesJohn Crispin
Before we start adding the platform code we add the common include files. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4893/
2013-02-17Document: devicetree: add OF documents for lantiq serial portJohn Crispin
Signed-off-by: John Crispin <blogic@openwrt.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: devicetree-discuss@lists.ozlabs.org
2013-02-17MIPS: ath79: simplify MISC IRQ handlingGabor Juhos
The current code uses multiple if statements for demultiplexing the different interrupt sources. Additionally, the MISC interrupt controller has 32 interrupt sources and the current code does not handles all of them. Get rid of the if statements and process all interrupt sources in a loop to fix these issues. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4874/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: ath79: simplify ath79_gpio_function_* routinesGabor Juhos
Make ath79_gpio_function_{en,dis}able to be wrappers around ath79_gpio_function_setup. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4871/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: ath79: fix GPIO function selection for AR934x SoCsGabor Juhos
GPIO function selection is not working on the AR934x SoCs because the offset of the function selection register is different on those. Add a helper routine which returns the correct register address based on the SoC type, and use that in the 'ath79_gpio_function_*' routines. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4870/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Add new GIC clocksource.Steven J. Hill
Add new clocksource that uses the counter present on the MIPS Global Interrupt Controller. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4681/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: dsp: Simplify the DSP macros.Steven J. Hill
Simplify the DSP macros for vanilla (non-microMIPS) kernels and toolchains that do not support the DSP ASEs. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4687/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: dsp: Support toolchains without DSP ASE and microMIPS.Steven J. Hill
Add macros to support the DSP ASE with microMIPS kernels when the toolchain does not have support. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4686/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: dsp: Add assembler support for DSP ASEs.Steven J. Hill
Newer toolchains support the DSP and DSP Rev2 instructions. This patch performs a check for that support and adds compiler and assembler flags for only the files that need use those instructions. Signed-off-by: Steven J. Hill <sjhill@mips.com> Acked-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4752/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Add support for the M14KEc core.Steven J. Hill
Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4682/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-17MIPS: Clean-ups for MIPS Technologies Inc. generic header file.Steven J. Hill
Clean up standard header text and remove unused #define. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4703/ Signed-off-by: John Crispin <blogic@openwrt.org>
generated by cgit (git 2.34.1) at 2025-09-23 23:08:38 +0000