summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-17MIPS: Xway: Fix clk leakLibo Chen
When gptu_r32 fails, we should put clk before returning. Signed-off-by: Libo Chen <libo.chen@huawei.com> Acked-by: John Crispin <blogic@openwrt.org> Cc: grant.likely@linaro.org Cc: rob.herring@calxeda.com, Cc: linux-mips@linux-mips.org Cc: LKML linux-kernel@vger.kernel.org Cc: Andrew Morton akpm@linux-foundation.org Cc: Li Zefan lizefan@huawei.com Patchwork: https://patchwork.linux-mips.org/patch/5247/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-17ath9k: fix draining aggregation tid buffersFelix Fietkau
After a tx attempt, an A-MPDU subframe can still have fi->retries at 0 (if the retry count wasn't incremented due to powersave). In that case it is still tracked as part of the block ack window, so when draining the tid queue, its sequence number needs to be cleared from the pending frame bitmap. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: fix rate handling/reportingFelix Fietkau
This patch fixes some issues introduced in the rate control API rework. When not running aggregation, copy bf->rates into info->control.rates before applying the rate control status to it. In ath_lookup_rate, the rates need to be pulled from bf->rates, not the tx info. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: fix aggregation stop/flush handlingFelix Fietkau
When aggregation stop is requested, don't run the mac80211 aggregation stop callback yet, while the session is still blocked. Also, when aggregation flush is requested, don't run the callback at all. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k_hw: Enable manual peak calibration for AR9485Sujith Manoharan
Manual peak calibration is currently enabled only for AR9462 and AR9565. This is also required for AR9485. The initvals are also modified to disable HW peak calibration. Cc: <stable@vger.kernel.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17rtlwifi: rtl8192cu: Add new USB IDAlbert Pool
This adds the USB ID of the On Networks N300MA, clone of Netgear WNA3100M. Signed-off-by: Albert Pool <albertpool@solcon.nl> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Ana Rey <Anazul77@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17brcmfmac: announce P2P_DEVICE support in wiphy structureArend van Spriel
P2P_DEVICE support was removed from brcmfmac for v3.9 kernel with the commit below: commit 1527c343c12f3a2aae532aa881d12c6fbf8749f4 Author: Arend van Spriel <arend@broadcom.com> Date: Thu Apr 4 12:10:11 2013 +0200 brcmfmac: remove advertising P2P device support However, it got merged into wireless-next. But for 3.10 brcmfmac does support P2P device. Putting it back with this commit. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17rtlwifi: rtl8188ee: Fix warning when building on big-endian systemsLarry Finger
In http://lkml.indiana.edu/hypermail/linux/kernel/1305.1/index.html, Geert Uytterhoeven reports a new warning when building 3.10-rc1 in this driver. This is caused by using a "#if" test to see if __LITTLE_ENDIAN is set, which fails for all big-endian systems. Change to "ifdef". Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: Fix crash on module unloadSujith Manoharan
Make sure that any open relayfs files are closed before unregistering with mac80211, otherwise this crash is seen: [ 1331.097846] BUG: unable to handle kernel paging request at 6b6b6b8b [ 1331.098170] IP: [<c063d0d6>] debugfs_remove+0x26/0x80 [ 1331.098170] *pdpt = 000000002f9aa001 *pde = 0000000000000000 [ 1331.098170] Oops: 0000 [#1] PREEMPT SMP [ 1331.098170] Modules linked in: iptable_raw xt_CT nf_conntrack_ipv4 nf_defrag] [ 1331.098170] Pid: 4794, comm: rmmod Tainted: G WC 3.9.1+ #5 To Be Fi. [ 1331.098170] EIP: 0060:[<c063d0d6>] EFLAGS: 00010202 CPU: 0 [ 1331.098170] EIP is at debugfs_remove+0x26/0x80 [ 1331.098170] EAX: f2f3acd0 EBX: f2f3acd0 ECX: 00000006 EDX: f8622348 [ 1331.098170] ESI: 6b6b6b6b EDI: 00000001 EBP: ee251e14 ESP: ee251e0c [ 1331.098170] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 1331.098170] CR0: 8005003b CR2: 6b6b6b8b CR3: 2e7b7000 CR4: 000007e0 [ 1331.098170] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 1331.098170] DR6: ffff0ff0 DR7: 00000400 [ 1331.098170] Process rmmod (pid: 4794, ti=ee250000 task=efaa2560 task.ti=ee25) [ 1331.098170] Stack: [ 1331.098170] f241e170 0000000a ee251e1c f861394d ee251e28 c04e3088 f241e170 4 [ 1331.098170] c04e30fe f45482b0 ee251e54 c04e3187 f25e86b0 ee251e54 f8618748 0 [ 1331.098170] 0000000a 00000001 ee251e68 f860065b f2509e20 f25085a0 f5b6e8a4 8 [ 1331.098170] Call Trace: [ 1331.098170] [<f861394d>] remove_buf_file_handler+0xd/0x20 [ath9k] [ 1331.098170] [<c04e3088>] relay_remove_buf+0x18/0x30 [ 1331.098170] [<c04e30fe>] relay_close_buf+0x2e/0x40 [ 1331.098170] [<c04e3187>] relay_close+0x77/0xf0 [ 1331.098170] [<f8618748>] ? dpd_exit+0x38/0x40 [ath9k] [ 1331.098170] [<f860065b>] ath9k_deinit_softc+0x8b/0xa0 [ath9k] [ 1331.098170] [<f86006b8>] ath9k_deinit_device+0x48/0x60 [ath9k] [ 1331.098170] [<f86107f1>] ath_pci_remove+0x31/0x50 [ath9k] [ 1331.098170] [<c06dbff8>] pci_device_remove+0x38/0xc0 [ 1331.098170] [<c079daa4>] __device_release_driver+0x64/0xc0 [ 1331.098170] [<c079db97>] driver_detach+0x97/0xa0 [ 1331.098170] [<c079cacc>] bus_remove_driver+0x6c/0xe0 [ 1331.098170] [<c079c197>] ? bus_put+0x17/0x20 [ 1331.098170] [<c079cae3>] ? bus_remove_driver+0x83/0xe0 [ 1331.098170] [<c079e709>] driver_unregister+0x49/0x80 [ 1331.098170] [<c06dc138>] pci_unregister_driver+0x18/0x80 [ 1331.098170] [<f8610602>] ath_pci_exit+0x12/0x20 [ath9k] [ 1331.098170] [<f8619ce0>] ath9k_exit+0x17/0x337 [ath9k] [ 1331.098170] [<c09e537d>] ? mutex_unlock+0xd/0x10 [ 1331.098170] [<c04bd36c>] sys_delete_module+0x17c/0x250 [ 1331.098170] [<c0540dc4>] ? do_munmap+0x244/0x2d0 [ 1331.098170] [<c0540e96>] ? vm_munmap+0x46/0x60 [ 1331.098170] [<c09e8dc4>] ? restore_all+0xf/0xf [ 1331.098170] [<c09ebf50>] ? __do_page_fault+0x4c0/0x4c0 [ 1331.098170] [<c04b18e4>] ? trace_hardirqs_on_caller+0xf4/0x180 [ 1331.098170] [<c09ef28d>] sysenter_do_call+0x12/0x38 [ 1331.098170] Code: 90 8d 74 26 00 55 89 e5 83 ec 08 89 1c 24 89 74 24 04 3e 82 [ 1331.098170] EIP: [<c063d0d6>] debugfs_remove+0x26/0x80 SS:ESP 0068:ee251e0c [ 1331.098170] CR2: 000000006b6b6b8b [ 1331.727971] ---[ end trace b5bb9f2066cef7f9 ]--- Cc: <stable@vger.kernel.org> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17net/wireless: ATH9K should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `ath9k_beacon_generate': drivers/net/wireless/ath/ath9k/beacon.c:146: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath9k/beacon.c:174: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/beacon.c:176: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath9k_beacon_remove_slot': drivers/net/wireless/ath/ath9k/beacon.c:252: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_descdma_setup': drivers/net/wireless/ath/ath9k/init.c:382: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_edma_get_buffers': drivers/net/wireless/ath/ath9k/recv.c:616: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_get_next_rx_buf': drivers/net/wireless/ath/ath9k/recv.c:740: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_edma_cleanup': drivers/net/wireless/ath/ath9k/recv.c:176: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_cleanup': drivers/net/wireless/ath/ath9k/recv.c:340: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_buf_link': drivers/net/wireless/ath/ath9k/recv.c:122: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_tasklet': drivers/net/wireless/ath/ath9k/recv.c:1275: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:1277: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath9k/recv.c:1283: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_init': drivers/net/wireless/ath/ath9k/recv.c:226: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:229: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_rx_init': drivers/net/wireless/ath/ath9k/recv.c:303: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:306: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_tx_complete_buf': drivers/net/wireless/ath/ath9k/xmit.c:2088: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_txstatus_setup': drivers/net/wireless/ath/ath9k/xmit.c:2344: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_tx_set_retry': drivers/net/wireless/ath/ath9k/xmit.c:307: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_tx_setup_buffer': drivers/net/wireless/ath/ath9k/xmit.c:1887: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/xmit.c:1889: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17bcma: add more core IDsRafał Miłecki
PCIe and ARM CR4 cores were found on 14e4:43b1 AKA BCM4352. Reported-by: Gabriel Thörnblad <gabriel@thornblad.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17iwlegacy: remove inline marking of EXPORT_SYMBOL functionsDenis Efremov
EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-05-17arm64: debug: fix mdscr.ss check when enabling debug exceptionsWill Deacon
When we take an exception at EL1, we only want to enable debug exceptions if we're not currently stepping, otherwise we can easily get stuck in a loop stepping into interrupt handlers. Unfortunately, the current code tests the wrong bit in the mdscr, so fix that. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-05-17ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clockVaibhav Hiremath
It is required to enable respective clock-domain before enabling any clock/module inside that clock-domain. During common-clock migration, .clkdm_name field got missed for "clkdiv32k_ick" clock, which leaves "clk_24mhz_clkdm" unused; so it will be disabled even if childs of this clock-domain is enabled, which keeps child modules in idle mode. This fixes the kernel crash observed on AM335xEVM-SK platform, where clkdiv32_ick clock is being used as a gpio debounce clock and since clkdiv32k_ick is in idle mode it leads to below crash - Crash Log: ========== [ 2.598347] Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa1ac150 [ 2.606434] Internal error: : 1028 [#1] SMP ARM [ 2.611207] Modules linked in: [ 2.614449] CPU: 0 Not tainted (3.8.4-01382-g1f449cd-dirty #4) [ 2.620973] PC is at _set_gpio_debounce+0x60/0x104 [ 2.626025] LR is at clk_enable+0x30/0x3c Cc: stable@vger.kernel.org # v3.9 Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-17ARM: mvebu: Fix ranges entry on XP GP boardEzequiel Garcia
With the latest device tree reorganization which introduced the 'internal-reg' node, now the only region translated is the internal register's. This makes the description of the hardware incomplete, for it lacks the Device Bus childs address space. In order to fix this, it's required to add a 'ranges' entry with a suitable address space to map Device Bus childs, on a per-board basis. This patch fixes the ranges property on the Armada XP GP board. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-17Merge tag 'sound-3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A fairly calm update at this time, as seen in the short log, only one fix per person: including, - a few ASoC fixes (da7213 dmic, ux500 AD slot, wm0010 error path) - a copule of HD-audio fixes - a few other misc fixes (MIPS allmodconfig, proc output in usb, old PowerBook support)" * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: proc: use found syncmaxsize to determine feedback format ALSA: hda - Add headset mic support for another Dell machine ALSA: snd-aoa: Add a layout entry for PowerBook6,5 ALSA: hda - Check the activity of the NID to be powered down sound: Fix make allmodconfig on MIPS correctly ASoC: da7213: Fix setting dmic_samplephase and dmic_clk_rate ASoC: ux500: Swap even/odd AD slot definitions ASoC: wm0010: fix error return code in wm0010_boot()
2013-05-17s390/pgtable: fix ipte notify bitChristian Borntraeger
Dont use the same bit as user referenced. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2013-05-17s390/xpram: mark xpram as non-rotationalChristian Borntraeger
xpram is a memory technology. Lets mark that as non-rotational. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-17s390/smp: fix cpu re-scan vs. cpu stateMartin Schwidefsky
The cpu-info array starts with a list of cpus in configured state, followed by the cpus in standby state. The comparison to decide which state a cpu has is incorrect, this causes configured cpus appear as standby cpus. The correct comparison is the index of the new cpu in the cpu-info array vs. the number of configured cpus. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-05-17kmemleak: No need for scanning specific module sectionsSteven Rostedt
As kmemleak now scans all module sections that are allocated, writable and non executable, there's no need to scan individual sections that might reference data. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au>
2013-05-17kmemleak: Scan all allocated, writeable and not executable module sectionsSteven Rostedt
Instead of just picking data sections by name (names that start with .data, .bss or .ref.data), use the section flags and scan all sections that are allocated, writable and not executable. Which should cover all sections of a module that might reference data. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> [catalin.marinas@arm.com: removed unused 'name' variable] [catalin.marinas@arm.com: collapsed 'if' blocks] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au>
2013-05-17i2c: designware: always clear interrupts before enabling themMika Westerberg
If the I2C bus is put to a low power state by an ACPI method it might pull the SDA line low (as its power is removed). Once the bus is put to full power state again, the SDA line is pulled back to high. This transition looks like a STOP condition from the controller point-of-view which sets STOP detected bit in its status register causing the driver to fail subsequent transfers. Fix this by always clearing all interrupts before we start a transfer. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2013-05-17i2c: designware: fix RX FIFO overrunJosef Ahmad
i2c_dw_xfer_msg() pushes a number of bytes to transmit/receive to/from the bus into the TX FIFO. For master-rx transactions, the maximum amount of data that can be received is calculated depending solely on TX and RX FIFO load. This is racy - TX FIFO may contain master-rx data yet to be processed, which will eventually land into the RX FIFO. This data is not taken into account and the function may request more data than the controller is actually capable of storing. This patch ensures the driver takes into account the outstanding master-rx data in TX FIFO to prevent RX FIFO overrun. Signed-off-by: Josef Ahmad <josef.ahmad@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2013-05-17Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Included changes: - fix global protection fault by avoiding double call_rcu Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-17batman-adv: Fix rcu_barrier() miss due to double call_rcu() in TT codeLinus Lüssing
rcu_barrier() only waits for the currently scheduled rcu functions to finish - it won't wait for any function scheduled via another call_rcu() within an rcu scheduled function. Unfortunately our batadv_tt_orig_list_entry_free_ref() does just that, via a batadv_orig_node_free_ref() call, leading to our rcu_barrier() call potentially missing such a batadv_orig_node_free_ref(). This patch fixes this issue by calling the batadv_orig_node_free_rcu() directly from the rcu callback, removing the unnecessary, additional call_rcu() layer here. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org>
2013-05-17ALSA: usb-audio: proc: use found syncmaxsize to determine feedback formatTorstein Hegge
freqshift is only set for the data endpoint and syncmaxsize is only set for the sync endpoint. This results in a syncmaxsize of zero used in the proc output feedback format calculation, which gives a feedback format incorrectly shown as 8.16 for UAC2 devices. As neither the data nor the sync endpoint gives all the relevant content, output the two combined. Also remove the sync_endpoint "packet size" which is always zero and the sync_endpoint "momentary freq" which is constant. Tested with UAC2 async and UAC1 adaptive, not tested with UAC1 async. Reported-by: B. Zhang <bb.zhang@free.fr> Signed-off-by: Torstein Hegge <hegge@resisty.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-16Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Fix for radeon nomodeset regression, old radeon interface cliprects fix, 2 qxl crasher fixes, and a couple of minor cleanups. I may have a new AMD hw support branch next week, its one of those doesn't affect anything existing just adds new support, I'll see how it shapes up and I might ask you to take it, just thought I'd warn in advance." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: drm/radeon: restore nomodeset operation (v2) qxl: fix bug with object eviction and update area drm/qxl: drop active_user_framebuffer as its unneeded qxl: drop unused variable. drm/qxl: fix ioport interactions for kernel submitted commands. drm: remove unused wrapper macros drm/radeon: check incoming cliprects pointer
2013-05-17drm/radeon: restore nomodeset operation (v2)Dave Airlie
When UMS was deprecated it removed support for nomodeset commandline we really want this in distro land so we can debug stuff, everyone should fallback to vesa correctly. v2: oops -1 isn't used anymore, restore original behaviour -1 is default, so we can boot with nomodeset on the command line, then use radeon.modeset=1 to override it for debugging later. Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-17qxl: fix bug with object eviction and update areaDave Airlie
if the surface is evicted, this validation will happen to the wrong place, I noticed this with other work I was doing, haven't seen it go wrong in practice. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-17drm/qxl: drop active_user_framebuffer as its unneededDave Airlie
This was a bogus way to figure out what the active framebuffer was, just check if the underlying bo is the primary bo. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-17qxl: drop unused variable.Dave Airlie
this boolean isn't used anymore so drop it. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-17drm/qxl: fix ioport interactions for kernel submitted commands.Dave Airlie
So qxl has ioports, but it really really really doesn't want you to write to them twice, but if you write and get a signal before the irq arrives to let you know its completed, you have to think ahead and avoid writing another time. However this works fine for update area where really multiple writes aren't the end of the world, however with create primary surface, you can't ever do multiple writes. So this stop internal kernel writes from doing interruptible waits, because otherwise we have no idea if this write is a new one or a continuation of a previous one. virtual hw sucks more than real hw. This fixes lockups and VM crashes when resizing and starting/stopping X. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-05-16Char: lp, protect LPGETSTATUS with port_mutexsalina@us.ibm.com
The patch fixes a problem in the lp driver that can cause oopses as follows: process A: calls lp_write, which in turn calls parport_ieee1284_write_compat, and that invokes parport_wait_peripheral process B: meanwhile does an ioctl(LPGETSTATUS), which call lp_release_parport when done. This function will set physport->cad = NULL. process A: parport_wait_peripheral tries to dereference physport->cad and dies So, protect that code with the port_mutex in order to protect against simultaneous calls to lp_read/lp_write. Similar protection is probably required for ioctl(LPRESET)... This patch was done by IBM a while back and we (at suse) have that since at least 2004 in our repos. Let's make it upstream. Signed-off-by: okir@suse.de Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16dummy-irq: require the user to specify an IRQ numberJonathan Corbet
Make sure that we let the user know that without specifying IRQ#, dummy-irq driver is useless. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN cardDan Williams
A rebranded Novatel E371 for AT&T's LTE bands. Cc: stable <stable@vger.kernel.org> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16usb: ohci: fix goto wrong tag in err caseLibo Chen
fix goto wrong tag in usb_hcd_nxp_probe Signed-off-by: Libo Chen <libo.chen@huawei.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16usb: isp1760-if: fix memleak when platform_get_resource failLibo Chen
When platform_get_resource fail, we should release_mem_region Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16usb: ehci-s5p: fix memleak when fallback to pdataLibo Chen
When devm_usb_get_phy fail, we should free hcd Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: serial: clean up chars_in_bufferJohan Hovold
No need to grab disconnect mutex in chars_in_buffer now that no sub-driver is or should be querying hardware buffers anymore. (They should use wait_until_sent.) Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: ti_usb_3410_5052: fix chars_in_buffer overheadJohan Hovold
Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 2c992cd73 ("USB: ti_usb_3410_5052: query hardware-buffer status in chars_in_buffer") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: io_ti: fix chars_in_buffer overheadJohan Hovold
Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 263e1f9f ("USB: io_ti: query hardware-buffer status in chars_in_buffer") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: ftdi_sio: fix chars_in_buffer overheadJohan Hovold
Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 6f602912 ("usb: serial: ftdi_sio: Add missing chars_in_buffer function") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Reported-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: ftdi_sio: clean up get_modem_statusJohan Hovold
Use usb-serial port rather than tty as argument to get_modem_status. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: serial: add generic wait_until_sent implementationJohan Hovold
Add generic wait_until_sent implementation which polls for empty hardware buffers using the new port-operation tx_empty. The generic implementation will be used for all sub-drivers that implement tx_empty but does not define wait_until_sent. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: serial: add wait_until_sent operationJohan Hovold
Add wait_until_sent operation which can be used to wait for hardware buffers to drain. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: set device dma_mask without reference to global dataStephen Warren
Many USB host drivers contain code such as: if (!pdev->dev.dma_mask) pdev->dev.dma_mask = &tegra_ehci_dma_mask; ... where tegra_ehci_dma_mask is a global. I suspect this code originated in commit 4a53f4e "USB: ehci-tegra: add probing through device tree" and was simply copied everywhere else. This works fine when the code is built-in, but can cause a crash when the code is in a module. The first module load sets up the dma_mask pointer, but if the module is removed and re-inserted, the value is now non-NULL, and hence is not updated to point at the new location, and hence points at a stale location within the previous module load address, which in turn causes a crash if the pointer is de-referenced. The simplest way of solving this seems to be to copy the code from ehci-platform.c, which uses the coherent_dma_mask as the target for the dma_mask pointer. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: Blacklisted Cinterion's PLxx WWAN InterfaceSchemmel Hans-Christoph
/drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN Interface (USB Interface 4), because it will be handled by QMI WWAN driver. Product IDs renamed. Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16usb: option: Add Telewell TW-LTE 4GTeppo Kotilainen
Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by: Teppo Kotilainen <qubit303@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: EHCI: remove bogus #errorArnd Bergmann
The EHCI host controller driver can be built standalone now, without enabling any of the available bus glue drivers, so there is not really a reason to error out here: drivers/usb/host/ehci-hcd.c:1303:2: error: #error "missing bus glue for ehci-hcd" #error "missing bus glue for ehci-hcd" The alternative would be to change the Kconfig code to build the ehci-hcd module only if any of the symbols below are in fact enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-13 09:03:32 +0000