summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-27mac80211: remove redundant monitor_work enqueueingEliad Peller
ieee80211_restart_sta_timer() takes care for enqueueing monitor_work if needed, so no need to do it again. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27mac80211: don't queue monitor work for HW_CONNECTION_MONITOREliad Peller
Devices that monitor the connection in the hw don't need the monitor work in the driver. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27wireless: Fix typo in mac80211_hwsim.cMasanari Iida
Correct spelling "occured" to "occurred" in drivers/net/wireless/mac80211_hwsim.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2x00:Add RT5372 chipset supportJohn Li
Signed-off-by: John Li <chen-yang.li@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: avoid useless cast from (struct ath_rateset *) to (u8 *) and backPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rtlwifi: Fix breakage in debug functions when built as a moduleLarry Finger
Since commit 481b9606, it has not been possible to invoke debugging with any rtlwifi driver built as a module. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2x00:Add VCO recalibrationJohn Li
Signed-off-by: John Li <chen-yang.li@mediatek.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Fix descriptor length for AR9462Sujith Manoharan
Change the descriptor length to 24 and explicitly set the control field 23 to zero. Not doing so would result in dropping of frames. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Fix programming SYNTH4 for AR9462Sujith Manoharan
The LONG_SHIFT_SELECT offset is different for AR9462 from the other chip families. Fix this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Initialize NF values properlySujith Manoharan
Using AR_SREV_* macros for setting up the chip-specific NF values will make adding support for new chips hard. Use separate macros for each chip. Currently, AR9462 has the same value for all NF limits. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove unused initvalsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Fix phyerr debug statisticsSujith Manoharan
Validate the phyerr value against the max. size of the statistics array properly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Prettify recv debugfs file outputSujith Manoharan
Dumping the RSSI information in the middle of error statistics is a bit misleading. Move them to the end. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Add a debugfs file to display reset statisticsSujith Manoharan
Location: <debugfs_path>/ieee80211/phy#/ath9k/reset Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Merge wiphy and misc debugfs filesSujith Manoharan
This patch merges the 'wiphy' and 'misc' debugfs files and consolidates the information. Information about the current channel and other HT parameters can be obtained from both mac80211 and iw. Remove such redundant data. The reset statistics have been removed, they will be re-added in a subsequent patch (in a new debugfs file). Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k: Remove unnecessary variable initializationSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ath9k_hw: remove duplicate initvalsFelix Fietkau
Comparing SHA1 checksums of the initval tables has shown that there are many tables that are 100% identical. iniBank{0,1,2,3,7} and iniBB_RfGain are shared by AR5416, AR913x, AR9160 iniBank6 is shared between AR5416 and AR9160 iniBank6TPC is shared between AR913x and AR9160 iniPcieSerdes is the same for all AR9002 based devices The CCK FIR coefficients are shared between AR9271 and AR9287 Getting rid of those duplicates saves about 7.5k uncompressed (on MIPS). For AR9003 and later there are some duplicates as well, but I've decided to leave them in for now, as the initvals for those chips are still actively maintained by QCA. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27rt2x00: Add support for D-Link DWA-127 to rt2800usb.Gertjan van Wingerde
This is an RT3070 based device. Cc: <stable@vger.kernel.org> Reported-by: Mikhail Kryshen <mikhail@kryshen.net> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27ktest: Fix make_min_config test when build failsSteven Rostedt
The make_min_config does not take into account when the build fails, resulting in a invalid MIN_CONFIG .config file. When the build fails, it is ignored and the boot test is executed, using the previous built kernel. The configs that should be tested are not tested and they may be added or removed depending on the result of the last kernel that succeeded to be built. If the build fails, mark the current config as a failure and the configs that were disabled may still be needed. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-27Merge branch 'wireless-next' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi
2012-02-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-02-27Merge branch 'lpc32xx/fixes' of git://git.antcom.de/linux-2.6 into fixesArnd Bergmann
* 'lpc32xx/fixes' of git://git.antcom.de/linux-2.6: (5 commits) ARM: LPC32xx: serial.c: Fixed loop limit ARM: LPC32xx: serial.c: HW bug workaround ARM: LPC32xx: irq.c: Clear latched event ARM: LPC32xx: Fix interrupt controller init ARM: LPC32xx: Fix irq on GPI_28 Update to Linux 3.3-rc5 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-27ath6kl: Remove bogus non-NULL pointer checkVasanthakumar Thiagarajan
In ath6kl_cfg80211_add_key(), params is checked for non-NULL but this pointer has been deferenced many times before this check. This gives the following smatch warning. add_key() can never carry NULL as params, remove this bogus check. ath6kl_cfg80211_add_key(86) warn: variable dereferenced before check 'params' Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-02-27ath6kl: Fix missing release of semaphore in ath6kl_stop_txrx()Vasanthakumar Thiagarajan
This fixes smatch warning "inconsistent returns sem:&ar->sem". Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-02-27ath6kl: assign Tx packet drop threshold per endpoint based on AC priorityChilam Ng
Tx packets will begin to drop when there are multiple traffic priorities and the current traffic is not the highest priority and the remaining cookies drop below a certain number, which is fixed for all AC. It is possilbe that lower priority AC have more traffic which will consume more cookies and lock out higher priority AC from having any. Assign each endpoint (AC) with a different Tx-packet-drop threshold so lower priority AC is more likely to drop packets and the cookies become more available to higher priority AC. Signed-off-by: Chilam Ng <chilamng@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-02-27drm/i915: Remove use of the autoreported ringbuffer HEAD positionChris Wilson
This is a revert of 6aa56062eaba67adfb247cded244fd877329588d. This was originally introduced to workaround reads of the ringbuffer registers returning 0 on SandyBridge causing hangs due to ringbuffer overflow. The root cause here was reads through the GT powerwell require the forcewake dance, something we only learnt of later. Now it appears that reading the reported head position from the HWS is returning garbage, leading once again to hangs. For example, on q35 the autoreported head reports: [ 217.975608] head now 00010000, actual 00010000 [ 436.725613] head now 00200000, actual 00200000 [ 462.956033] head now 00210000, actual 00210010 [ 485.501409] head now 00400000, actual 00400020 [ 508.064280] head now 00410000, actual 00410000 [ 530.576078] head now 00600000, actual 00600020 [ 553.273489] head now 00610000, actual 00610018 which appears reasonably sane. In contrast, if we look at snb: [ 141.970680] head now 00e10000, actual 00008238 [ 141.974062] head now 02734000, actual 000083c8 [ 141.974425] head now 00e10000, actual 00008488 [ 141.980374] head now 032b5000, actual 000088b8 [ 141.980885] head now 03271000, actual 00008950 [ 142.040628] head now 02101000, actual 00008b40 [ 142.180173] head now 02734000, actual 00009050 [ 142.181090] head now 00000000, actual 00000ae0 [ 142.183737] head now 02734000, actual 00009050 In addition, the automatic reporting of the head position is scheduled to be defeatured in the future. It has no more utility, remove it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45492 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Eric Anholt <eric@anholt.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-27HID: usbhid: Add NOGET quirk for the AIREN Slim+ keyboardAlan Stern
This patch (as1531) adds a NOGET quirk for the Slim+ keyboard marketed by AIREN. This keyboard seems to have a lot of bugs; NOGET works around only one of them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: okias <d.okias@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-27doc: dt: Fix broken reference in gpio-leds documentationTobias Klauser
The gpios property is described in Documentation/devicetree/gpio.txt, so reference this document. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-02-27ARM: LPC32xx: serial.c: Fixed loop limitRoland Stigge
This patch fixes a wrong loop limit on UART init. Signed-off-by: Roland Stigge <stigge@antcom.de> Cc: stable@vger.kernel.org
2012-02-27ARM: LPC32xx: serial.c: HW bug workaroundRoland Stigge
This patch fixes a HW bug by flushing RX FIFOs of the UARTs on init. It was ported from NXP's git.lpclinux.com tree. Signed-off-by: Roland Stigge <stigge@antcom.de> Cc: stable@vger.kernel.org
2012-02-27ARM: LPC32xx: irq.c: Clear latched eventRoland Stigge
This patch fixes the wakeup disable function by clearing latched events. Signed-off-by: Roland Stigge <stigge@antcom.de> Cc: stable@vger.kernel.org
2012-02-27ARM: LPC32xx: Fix interrupt controller initRoland Stigge
This patch fixes the initialization of the interrupt controller of the LPC32xx by correctly setting up SIC1 and SIC2 instead of (wrongly) using the same value as for the Main Interrupt Controller (MIC). Signed-off-by: Roland Stigge <stigge@antcom.de> Cc: stable@vger.kernel.org
2012-02-27ARM: LPC32xx: Fix irq on GPI_28Roland Stigge
The GPI_28 IRQ was not registered properly. The registration of IRQ_LPC32XX_GPI_28 was added and the (wrong) IRQ_LPC32XX_GPI_11 at LPC32XX_SIC1_IRQ(4) was replaced by IRQ_LPC32XX_GPI_28 (see manual of LPC32xx / interrupt controller). Signed-off-by: Roland Stigge <stigge@antcom.de> Cc: stable@vger.kernel.org
2012-02-27[media] [FOR,v3.3] uvcvideo: Avoid division by 0 in timestamp calculationLaurent Pinchart
Use system timestamps if the timestamp can't be computed from the data sent by the device. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-27of/mdio: fix fixed link bus nameBaruch Siach
Since 9e6c643b (phy/fixed: use an unique MDIO bus name) the name of the fixed PHY bus is "fixed-0". Teach of_phy_connect_fixed_link() the new name. Tested on a P1020RDB PowerPC system. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-02-27of/fdt.c: asm/setup.h included twiceDanny Kukawka
drivers/of/fdt.c included 'asm/setup.h' twice, remove the duplicate. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-02-27of: add picochip vendor prefixJamie Iles
Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfsLinus Torvalds
Here are some trivial NTFS changes (a spelling fix and two use before NULL check cases found by Coverity as well as an update in MAINTAINERS for the path to the ntfs git repo) together with a simple LDM fix for parsing fragmented VBLKs. * git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs: NTFS: Update git repo path in MAINTAINERS file. LDM: Fix reassembly of extended VBLKs. NTFS: Correct two spelling errors "dealocate" to "deallocate" in mft.c. NTFS: Do not dereference pointer before checking for NULL. NTFS: Remove unused variable.
2012-02-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/AMD: Fix UP build error x86: Specify a size for the cmp in the NMI handler x86/nmi: Test saved %cs in NMI to determine nested NMI case x86/amd: Fix L1i and L2 cache sharing information for AMD family 15h processors x86/microcode: Remove noisy AMD microcode warning
2012-02-27Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/events: Revert trace_sched_stat_sleeptime()
2012-02-27Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Handle pending irqs in irq_startup() genirq: Unmask oneshot irqs when thread was not woken
2012-02-27compat: fix compile breakage on s390Heiko Carstens
The new is_compat_task() define for the !COMPAT case in include/linux/compat.h conflicts with a similar define in arch/s390/include/asm/compat.h. This is the minimal patch which fixes the build issues. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-02-27[PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.hCong Wang
drivers/parisc/iommu-helpers.h:62: error: implicit declaration of function 'prefetchw' make[3]: *** [drivers/parisc/sba_iommu.o] Error 1 drivers/parisc/iommu-helpers.h needs to #include <linux/prefetch.h> where prefetchw is declared. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-27[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping ↵James Bottomley
functions conditional The problem in commit fea80311a939a746533a6d7e7c3183729d6a3faf Author: Randy Dunlap <rdunlap@xenotime.net> Date: Sun Jul 24 11:39:14 2011 -0700 iomap: make IOPORT/PCI mapping functions conditional is that if your architecture supplies pci_iomap/pci_iounmap, it expects always to supply them. Adding empty body defitions in the !CONFIG_PCI case, which is what this patch does, breaks the parisc compile because the functions become doubly defined. It took us a while to spot this, because we don't actually build !CONFIG_PCI very often (only if someone is brave enough to test the snake/asp machines). Since the note in the commit log says this is to fix a CONFIG_GENERIC_IOMAP issue (which it does because CONFIG_GENERIC_IOMAP supplies pci_iounmap only if CONFIG_PCI is set), there should actually have been a condition upon this. This should make sure no other architecture's !CONFIG_PCI compile breaks in the same way as parisc. The fix had to be updated to take account of the GENERIC_PCI_IOMAP separation. Reported-by: Rolf Eike Beer <eike@sf-mail.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-27Merge branch 'fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
2012-02-27ath6kl: Add unicast mgmt frame bufferingNaveen Gangadharan
PS buffering of unicast Action frames that are sent in a context of a BSS. In AP mode when the recepient station goes to powersave and PS_POLL flag is not set, we would buffer the frames. Send out unicast mgmt bufferred frame when PS_POLL is received. This fixes a bug in P2P GO behavior when sending a GO Discoverability Request to a client that is in sleep mode. kvalo: indentation fixes Signed-off-by: Thirumalai Pachamuthu <tpachamu@qca.qualcomm.com> Signed-off-by: Naveen Gangadharan <ngangadh@qca.qualcomm.com> Signed-off-by: Aarthi Thiruvengadam <athiruve@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-02-27ARM: OMAP: make iommu subsys_initcall to fix builtin omap3ispOhad Ben-Cohen
omap3isp depends on omap's iommu and will fail to probe if initialized before it (which always happen if they are builtin). Make omap's iommu subsys_initcall as an interim solution until the probe deferral mechanism is merged. Reported-by: James <angweiyang@gmail.com> Debugged-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: stable <stable@vger.kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Hiroshi Doyu <hdoyu@nvidia.com> Cc: Joerg Roedel <Joerg.Roedel@amd.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-02-27ARM: 7346/1: errata: fix PL310 erratum #753970 workaround selectionWill Deacon
Commit fa0ce403 ("ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds") introduced a consistent naming scheme for errata workarounds, but forgot to update the platforms selecting workarounds using the old names. This patch updates ux500 and vexpress to select the appropriate PL310 errata workarounds. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-27ARM: 7345/1: errata: update workaround for A9 erratum #743622Will Deacon
Erratum #743622 affects all r2 variants of the Cortex-A9 processor, so ensure that the workaround is applied regardless of the revision. Cc: <stable@vger.kernel.org> Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-27ARM: 7348/1: arm/spear600: fix one-shot timerGilles Chanteperdrix
Currently, the "clockevent_next_event" function only works correctly if the timer is not running when this function is called, which is not always the case when running with CONFIG_HIGH_RES_TIMERS. Fix this by stopping the timer at the beginning of this function. Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit (git 2.34.1) at 2025-09-19 02:25:30 +0000