summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-24Bluetooth: mgmt: Fix dev_class related command response timingJohan Hedberg
All mgmt commands that may fire off a hci_write_class_of_device command should wait for the completion of the HCI command before sending a response to user space. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-24Bluetooth: mgmt: Track pending class changesJohan Hedberg
This patch adds a flag to track pending changes to the class of device. This is needed since we cannot cleanly handle multiple simultaneous commands and need to return a "busy" error status in the mgmt commands that might trigger a class change. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23phy: IC+101G and PHY_HAS_INTERRUPT flagGiuseppe CAVALLARO
This patch adds the PHY_HAS_INTERRUPT flag for IC+101 device series. Also the patch does a simple dity-up to signal that the driver actually is for IP101A LF and IP101G devices. In fact, these are two similar PHYs that have the same IDs and mainly differ for the EEE capability supported in the G series. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23netdev/phy/icplus: Correct broken phy_init codeDavid McKay
The code for ip1001_config_init() was totally broken if you were not using RGMII. Instead of returning an error code or zero it actually returned the value in the IP1001_SPEC_CTRL_STATUS_2 register. It was also trying to set the IP1001_APS_ON bit , but never actually wrote back the register. The error checking was also incorrect in both this function and the reset function, so this patch fixes that up in a consistent fashion. Signed-off-by: David McKay <david.mckay@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23Staging: et131x: unify return value of .ndo_set_mac_address if address is ↵Danny Kukawka
invalid Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23ARM: 7339/1: amba/serial.h: Include types.h for resolving dependency of type ↵viresh kumar
bool serial.h uses bool, but its definition is missing, as it doesn't include types.h. Fix this by including types.h Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-23br_device: unify return value of .ndo_set_mac_address if address is invalidDanny Kukawka
Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23mcs7830: unify return value of .ndo_set_mac_address if address is invalidDanny Kukawka
Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23ethernet: unify return value of .ndo_set_mac_address if address is invalidDanny Kukawka
Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23ipsec: be careful of non existing mac headersEric Dumazet
Niccolo Belli reported ipsec crashes in case we handle a frame without mac header (atm in his case) Before copying mac header, better make sure it is present. Bugzilla reference: https://bugzilla.kernel.org/show_bug.cgi?id=42809 Reported-by: Niccolò Belli <darkbasic@linuxsystems.it> Tested-by: Niccolò Belli <darkbasic@linuxsystems.it> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23brcm80211: smac: only print block-ack timeout message at trace levelArend van Spriel
In regular use block-ack timeouts can happen so it does not make sense to fill the log with these messages. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-23brcm80211: smac: fix endless retry of A-MPDU transmissionsArend van Spriel
The A-MPDU code checked against a retry limit, but it was using the wrong variable to do so. This patch fixes this to assure proper retry mechanism. This problem had a side-effect causing the mac80211 flush callback to remain waiting forever as well. That side effect has been fixed by commit by Stanislaw Gruszka: commit f96b08a7e6f69c0f0a576554df3df5b1b519c479 Date: Tue Jan 17 12:38:50 2012 +0100 brcmsmac: fix tx queue flush infinite loop Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42576 Cc: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-23Bluetooth: mgmt: Add flags parameter to device_connectedJohan Hedberg
This patch updates the Device Connected events to match the latest API by adding a flags parameter to them. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix clear UUIDs responseJohan Hedberg
We also need to send a proper response when clearing UUIDs. This patch adds fixes the missing response for this use case. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Move service cache setting to a more sensible placeJohan Hedberg
Since we can now add UUIDs when powered off we don't really need to always use the service cache to avoid large bursts of HCI commands. Instead, the only important use case is when we're already powered and user space starts to initialize itself. This can be easiest detected by a "clear UUIDs" operation which is where this patch moves the service cache setting. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23PCI: fix memleak when ACPI _CRS is not used.Yinghai Lu
warning: unreferenced object 0xffff8801f6914200 (size 512): comm "swapper/0", pid 1, jiffies 4294893643 (age 2664.644s) hex dump (first 32 bytes): 00 00 c0 fe 00 00 00 00 ff ff ff ff 00 00 00 00 ................ 60 58 2f f6 03 88 ff ff 00 02 00 00 00 00 00 00 `X/............. backtrace: [<ffffffff81c2408c>] kmemleak_alloc+0x26/0x43 [<ffffffff8113764f>] __kmalloc+0x121/0x183 [<ffffffff81ca8d93>] get_current_resources+0x5a/0xc6 [<ffffffff81c5bedd>] pci_acpi_scan_root+0x13c/0x21c [<ffffffff81c2a745>] acpi_pci_root_add+0x1e1/0x421 [<ffffffff81408f50>] acpi_device_probe+0x50/0x190 [<ffffffff8149edc7>] really_probe+0x99/0x126 [<ffffffff8149ef83>] driver_probe_device+0x3b/0x56 [<ffffffff8149effd>] __driver_attach+0x5f/0x82 [<ffffffff8149d860>] bus_for_each_dev+0x5c/0x88 [<ffffffff8149eb87>] driver_attach+0x1e/0x20 [<ffffffff8149e7cc>] bus_add_driver+0xca/0x21d [<ffffffff8149f47b>] driver_register+0x91/0xfe [<ffffffff81409d09>] acpi_bus_register_driver+0x43/0x45 [<ffffffff8278bdc9>] acpi_pci_root_init+0x20/0x28 [<ffffffff810001e7>] do_one_initcall+0x57/0x134 The system has _CRS for root buses, but they are not used because the machine date is before the cutoff date for _CRS usage. Try to free those unused resource arrays and names. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc BenH says: 'Here are a few more powerpc bits for you. A stupid regression I introduced with my previous commit to "fix" program check exceptions (brown paper bag for me), fix the cpuidle default, a bug fix for something that isn't strictly speaking a regression but some upstream changes causes it to show in lockdep now while it didn't before, and finally a trivial one for rusty to make his life easier later on removing the old cpumask cruft. ' * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix various issues with return to userspace cpuidle: Default y on powerpc pSeries powerpc: Fix program check handling when lockdep is enabled powerpc: Remove references to cpu_*_map
2012-02-23Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next
2012-02-23ARM: OMAP2: fix mailbox init codeOhad Ben-Cohen
Fix this: arch/arm/mach-omap2/mailbox.c: In function 'omap2_mbox_probe': arch/arm/mach-omap2/mailbox.c:354: error: 'omap2_mboxes' undeclared (first use in this function) arch/arm/mach-omap2/mailbox.c:354: error: (Each undeclared identifier is reported only once arch/arm/mach-omap2/mailbox.c:354: error: for each function it appears in.) Which happens on CONFIG_ARCH_OMAP2 && !CONFIG_SOC_OMAP2420, due to missing omap2_mboxes declaration. In addition, make sure we declare the right mailbox instances for 2430. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Hiroshi Doyu <hdoyu@nvidia.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-23ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulatorsMatt Porter
This fixes smsc911x support on platforms using gpmc_smsc911x_init(). Commit c7e963f6888816 (net/smsc911x: Add regulator support) added the requirement that platforms provide vdd33a and vddvario supplies. Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-02-23Merge tag 'sound-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound sound fixes for 3.3-rc5 Just a collection of boring small fixes for ASoC, HD-audio Realtek and USB-audio drivers. * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: snd-usb-caiaq: Fix the return of XRUN ASoC: ak4642: fixup HeadPhone L/R dapm settings ALSA: hda/realtek - Fix surround output regression on Acer Aspire 5935 ALSA: hda/realtek - Fix overflow of vol/sw check bitmap ALSA: usb-audio: avoid integer overflow in create_fixed_stream_quirk() ASoC: wm8962: Fix sidetone enumeration texts
2012-02-23ASoC: i.MX SSI: Fix DSP_A format.Javier Martin
According to i.MX27 Reference Manual (p 1593) TXBIT0 bit selects whether the most significant or the less significant part of the data word written to the FIFO is transmitted. As DSP_A is the same as DSP_B with a data offset of 1 bit, it doesn't make any sense to remove TXBIT0 bit here. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2012-02-23drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0Hai Lan
When setting overlay position with x<0, it will divide 0 and make drm driver crash. Signed-off-by: Hai Lan <hai.lan@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23mfd: Initialize tps65912 irq platform data properlyAxel Lin
irq_base of the tps65912 irq platform data should be initialized with the board provided irq_base data. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-23mfd: Fix ACPI conflict checkJean Delvare
The code is currently always checking the first resource of every device only (several times.) This has been broken since the ACPI check was added in February 2010 in commit 91fedede0338eb6203cdd618d8ece873fdb7c22c. Fix the check to run on each resource individually, once. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-23drm/i915: fix mode set on load pipe. (v2)Dave Airlie
Booted my i965 machine and it started printing the unsupported pixel format of 0 message (once I added content to it). Oh looksie here, we pass 0. fix. v2: compile it. Buzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45966 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-02-23Btrfs: increase the global block reserve estimatesLiu Bo
When doing IO with large amounts of data fragmentation, the global block reserve calulations are too low. This increases them to avoid ENOSPC crashes. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-02-23Btrfs: clear the extent uptodate bits during parent transid failuresChris Mason
If btrfs reads a block and finds a parent transid mismatch, it clears the uptodate flags on the extent buffer, and the pages inside it. But we only clear the uptodate bits in the state tree if the block straddles more than one page. This is from an old optimization from to reduce contention on the extent state tree. But it is buggy because the code that retries a read from a different copy of the block is going to find the uptodate state bits set and skip the IO. The end result of the bug is that we'll never actually read the good copy (if there is one). The fix here is to always clear the uptodate state bits, which is safe because this code is only called when the parent transid fails. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-02-23Btrfs: add extra sanity checks on the path names in btrfs_mksubvolChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-02-23Btrfs: make sure we update latest_bdevChris Mason
When we are setting up the mount, we close all the devices that were not actually part of the metadata we found. But, we don't make sure that one of those devices wasn't fs_devices->latest_bdev, which means we can do a use after free on the one we closed. This updates latest_bdev as it goes. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-02-23Btrfs: improve error handling for btrfs_insert_dir_item callersChris Mason
This allows us to gracefully continue if we aren't able to insert directory items, both for normal files/dirs and snapshots. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-02-23ASoC: dapm: Check for bias level when powering downMark Brown
Recent enhancements in the bias management means that we might not be in standby when the CODEC is idle and can have active widgets without being in full power mode but the shutdown functionality assumes these things. Add checks for the bias level at each stage so that we don't do transitions other than the ON->PREPARE->STANDBY->OFF ones that the drivers are expecting. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-02-23Bluetooth: mgmt: Fix return value of add/remove_uuidJohan Hedberg
The Add/Remove UUID commands should return the device class instead of an empty parameter list. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix update_eir/class with HCI_AUTO_OFF flag setJohan Hedberg
If we're powered but still have the HCI_AUTO_OFF flag set the update_eir and update_class functions should not do anything. Additionally these functions need to be called when the flag is finally cleared through set_powered or when powering on for real. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Set DISCOVERY_STOPPED if controller resetsAndre Guedes
If controller is reset during the discovery procedure, Start Discovery command stops working. This can be easily reproduced by running "hciconfig hci0 reset" while discovering devices, for instance. We should force discovery state to DISCOVERY_STOPPED in case we receive a reset command complete event. Otherwise we may stuck in one of the active discovery states (DISCOVERY_INQUIRY, DISCOVERY_LE_SCAN and DISCOVERY_RESOLVING) and subsequent Start Discovery commands will simply fail. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23hwmon: (f75375s) Fix register write order when setting fans to full speedNikolaus Schulz
By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan to full speed. In the f75375s driver, this need be done by enabling manual fan control, plus duty mode for the F875387 chip, and then setting the maximum duty cycle. Fix a bug where the two necessary register writes were swapped, effectively discarding the setting to full-speed. Signed-off-by: Nikolaus Schulz <mail@microschulz.de> Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-02-23hwmon: (ads1015) Fix file leak in probe functionGuenter Roeck
An error while creating sysfs attribute files in the driver's probe function results in an error abort, but already created files are not removed. This patch fixes the problem. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@vger.kernel.org # 3.0+ Cc: Dirk Eibach <eibach@gdsys.de> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-02-23Bluetooth: mgmt: Fix count parameter in get_connections replyJohan Hedberg
This patch fixes the count parameter in the Get Connections reply message. We cannot know the right number until iterating through all connections so set the parameter value only after the loop. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Remove socket lock checkAndrei Emeltchenko
Simplify code so that we do not need to check whether socket is locked. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: Change sk lock to chan lock in L2CAP coreAndrei Emeltchenko
Change sk lock to chan lock in l2cap core and move sk locks to l2cap sock code. bh_locks were used because of being RCU critical section. When needed use explicit socket locks. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: Add unlocked __l2cap_chan_add functionAndrei Emeltchenko
Add unlocked L2CAP channel add function. Unlocked version will be used in later patches. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Reviewed-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: mgmt: Add legacy pairing info to dev_found eventsJohan Hedberg
This patch makes sure that legacy pairing vs SSP infomation gets properly propageted to the device_found events in the form of the legacy pairing flag. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix device_found parametersJohan Hedberg
According to the latest mgmt API there's a flags field instead of a separate confirm_name paramter. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix unpair_device responsesJohan Hedberg
This patch adds an error return when not powered and cleans up/simpifies the function logic in the same go. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Add missing powered checks to commandsJohan Hedberg
This patch adds missing powered checks to pair_device, cancel_pair_device, add_remote_oob_data and remove_remote_oob_data. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Allow class of device changes while powered offJohan Hedberg
This patch makes it possible to set the class when powered off. When powering on the right class of device value will be automatically writen to the controller. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Check for HCI_UP in update_eir() and update_class()Johan Hedberg
These functions should just silently fail when we're not powered on instead of trying to send HCI commands. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix return value for set_classJohan Hedberg
The return parameters for Set Device Class should consist of the new class value. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Fix clearing of dev_class when powering downJohan Hedberg
We should assume a value of 0 for the device class when powered off. The appropriate place to do this is in hci_dev_do_close(). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Fix missing short_name in read_infoJohan Hedberg
The short name is part of the Read Controller Info response and should be appropriately filled in based on the value of hdev->short_name. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-09-19 12:24:31 +0000