summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-17wifi: mt76: connac: fix txd multicast rate settingRyder Lee
The vif->bss_conf.mcast_rate should be applied to multicast data frame only. Fixes: 182071cdd594 ("mt76: connac: move connac2_mac_write_txwi in mt76_connac module") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921e: stop chip reset worker in unregister hookQuan Zhou
If the chip reset worker is triggered during the remove process, the chip DMA may not be properly pushed back to the idle state. This can lead to corruption of the DMA flow due to the chip reset. Therefore, it is necessary to stop the chip reset before the DMA is finalized. To avoid resetting the chip after the reset worker is cancelled, use __mt7921_mcu_drv_pmctrl() instead of mt7921_mcu_drv_pmctrl(). It is safe to ignore the pm mutex because the pm worker and wake worker have already been cancelled. Fixes: 033ae79b3830 ("mt76: mt7921: refactor init.c to be bus independent") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Co-developed-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921e: improve reliability of dma resetQuan Zhou
The hardware team has advised the driver that it is necessary to first put WFDMA into an idle state before resetting the WFDMA. Otherwise, the WFDMA may enter an unknown state where it cannot be polled with the right state successfully. To ensure that the DMA can work properly while a stressful cold reboot test was being made, we have reordered the programming sequence in the driver based on the hardware team's guidance. The patch would modify the WFDMA disabling flow from "DMA reset -> disabling DMASHDL -> disabling WFDMA -> polling and waiting until DMA idle" to "disabling WFDMA -> polling and waiting for DMA idle -> disabling DMASHDL -> DMA reset. Where he polling and waiting until WFDMA is idle is coordinated with the operation of disabling WFDMA. Even while WFDMA is being disabled, it can still handle Tx/Rx requests. The additional polling allows sufficient time for WFDMA to process the last T/Rx request. When the idle state of WFDMA is reached, it is a reliable indication that DMASHDL is also idle to ensure it is safe to disable it and perform the DMA reset. Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Co-developed-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Wang Zhao <wang.zhao@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: fix missing unwind goto in `mt7921u_probe`Jiefeng Li
`mt7921u_dma_init` can only return zero or negative number according to its definition. When it returns non-zero number, there exists an error and this function should handle this error rather than return directly. Fixes: 0d2afe09fad5 ("mt76: mt7921: add mt7921u driver") Signed-off-by: Jiefeng Li <jiefeng_li@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17mt76: mt7921: fix kernel panic by accessing unallocated eeprom.dataSean Wang
The MT7921 driver no longer uses eeprom.data, but the relevant code has not been removed completely since commit 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability"). This could result in potential invalid memory access. To fix the kernel panic issue in mt7921, it is necessary to avoid accessing unallocated eeprom.data which can lead to invalid memory access. Furthermore, it is possible to entirely eliminate the mt7921_mcu_parse_eeprom function and solely depend on mt7921_mcu_parse_response to divide the RxD header. [2.702735] BUG: kernel NULL pointer dereference, address: 0000000000000550 [2.702740] #PF: supervisor write access in kernel mode [2.702741] #PF: error_code(0x0002) - not-present page [2.702743] PGD 0 P4D 0 [2.702747] Oops: 0002 [#1] PREEMPT SMP NOPTI [2.702755] RIP: 0010:mt7921_mcu_parse_response+0x147/0x170 [mt7921_common] [2.702758] RSP: 0018:ffffae7c00fef828 EFLAGS: 00010286 [2.702760] RAX: ffffa367f57be024 RBX: ffffa367cc7bf500 RCX: 0000000000000000 [2.702762] RDX: 0000000000000550 RSI: 0000000000000000 RDI: ffffa367cc7bf500 [2.702763] RBP: ffffae7c00fef840 R08: ffffa367cb167000 R09: 0000000000000005 [2.702764] R10: 0000000000000000 R11: ffffffffc04702e4 R12: ffffa367e8329f40 [2.702766] R13: 0000000000000000 R14: 0000000000000001 R15: ffffa367e8329f40 [2.702768] FS: 000079ee6cf20c40(0000) GS:ffffa36b2f940000(0000) knlGS:0000000000000000 [2.702769] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.702775] CR2: 0000000000000550 CR3: 00000001233c6004 CR4: 0000000000770ee0 [2.702776] PKRU: 55555554 [2.702777] Call Trace: [2.702782] mt76_mcu_skb_send_and_get_msg+0xc3/0x11e [mt76 <HASH:1bc4 5>] [2.702785] mt7921_run_firmware+0x241/0x853 [mt7921_common <HASH:6a2f 6>] [2.702789] mt7921e_mcu_init+0x2b/0x56 [mt7921e <HASH:d290 7>] [2.702792] mt7921_register_device+0x2eb/0x5a5 [mt7921_common <HASH:6a2f 6>] [2.702795] ? mt7921_irq_tasklet+0x1d4/0x1d4 [mt7921e <HASH:d290 7>] [2.702797] mt7921_pci_probe+0x2d6/0x319 [mt7921e <HASH:d290 7>] [2.702799] pci_device_probe+0x9f/0x12a Fixes: 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: move mcu_uni_event and mcu_reg_event in common codeLorenzo Bianconi
mcu_uni_event and mcu_reg_event structs are shared between mt7921 and mt7615 drivers, so move them in connac lib. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: enable coredump supportRyder Lee
Host triggered and catastrophic event triggered firmware core dumping for basic firmware issues triage, including state reporting, function calltrace and MCU memory dump. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: add full system reset knobs into debugfsRyder Lee
Add testing points into debugfs to trigger firmware assert and enable full system recovery. Also rename knob "fw_ser" to a clear-cut name "sys_recovery". Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: enable full system reset supportBo Jiao
Add mt7996_reset() and refactor mt7996_mac_reset_work() to support full system recovery. Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: enable p2p supportSean Wang
Introduce p2p-go/p2p-client support to mt7921 driver CONNECTION_P2P_GC/GO is not supported with the current firmware so we added mt76_dev to mt76_connac_mcu_sta_basic_tlv signature to use CONNECTION_INFRA_STA/AP instead for p2p-client and p2p-go respectively to make it work. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17Merge tag 'scmi-updates-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers Arm SCMI updates for v6.4 The main and only new addition this time around is the support for unidirectional mailbox channels. SCMI communicates between the agent and the platform using one bidirectional 'a2p' channel used by the agent to send SCMI commands and synchronously receive the related replies, and an optional 'p2a' unidirectional channel used to asynchronously receive delayed responses and notifications emitted from the platform. In order to support platforms that support only unidirectional mailbox hardware channels, the existing bindings are extended to support the same. Both bidirectional and unidirectional channels support for the SCMI mailbox can coexist. The correct and effective combination of defined 'mboxes' and 'shmem' descriptors determines the type of the mailbox channel. This also contains a fix for the transfers allocation on Rx channel especially when the base protocol doesn't use Rx channel while some of the protocols can have dedicated Rx channels. * tag 'scmi-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Add support for unidirectional mailbox channels dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels firmware: arm_scmi: Fix xfers allocation on Rx channel firmware: arm_scmi: Use the bitmap API to allocate bitmaps firmware: arm_scmi: Fix device node validation for mailbox transport firmware: arm_scmi: Fix raw coexistence mode behaviour on failure path firmware: arm_scmi: Remove duplicate include header inclusion firmware: arm_scmi: Return a literal instead of a variable firmware: arm_scmi: Clean up a return statement in scmi_probe Link: https://lore.kernel.org/r/20230417145743.1904318-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-17Merge tag 'vexpress-update-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers Armv7/v8 Vexpress update for v6.4 Addition of explicit of_platform.h header inclusion and removal of soon to be removed of_device.h * tag 'vexpress-update-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: bus: vexpress-config: Add explicit of_platform.h include Link: https://lore.kernel.org/r/20230417145724.1904259-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-17Merge tag 'memory-controller-drv-6.4-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers Memory controller drivers for v6.4, part two 1. Tegra210 EMC: correct reading of MR18 register. 2. MediaTek SMI: add support for MT8365. * tag 'memory-controller-drv-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: mtk-smi: mt8365: Add SMI Support dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365 dt-bindings: memory-controllers: mediatek,smi-common: add mt8365 memory: tegra: read values from correct device Link: https://lore.kernel.org/r/20230416143248.308942-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-17wifi: mt76: mt7921: Replace fake flex-arrays with flexible-array membersGustavo A. R. Silva
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Address the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:266:25: warning: array subscript 0 is outside array bounds of ‘struct mt7921_asar_dyn_limit_v2[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:263:25: warning: array subscript 0 is outside array bounds of ‘struct mt7921_asar_dyn_limit[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:223:28: warning: array subscript <unknown> is outside array bounds of ‘struct mt7921_asar_geo_limit_v2[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:220:28: warning: array subscript <unknown> is outside array bounds of ‘struct mt7921_asar_geo_limit[0]’ [-Warray-bounds=] drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:334:37: warning: array subscript i is outside array bounds of ‘u8[0]’ {aka ‘unsigned char[]’} [-Warray-bounds=] Notice that the DECLARE_FLEX_ARRAY() helper allows for flexible-array members in unions. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/272 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: Replace zero-length array with flexible-array memberGustavo A. R. Silva
Zero-length arrays are deprecated [1] and have to be replaced by C99 flexible-array members. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help to make progress towards globally enabling -fstrict-flex-arrays=3 [2] Link: https://github.com/KSPP/linux/issues/78 [1] Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: add Netgear AXE3000 (A8000) supportReese Russell
Issue: Though the Netgear AXE3000 (A8000) is based on the mt7921 chipset because of the unique USB VID:PID combination this device does not initialize/register. Thus making it not plug and play. Fix: Adds support for the Netgear AXE3000 (A8000) based on the Mediatek mt7921au chipset. The method of action is adding the USD VID/PID pair to the mt7921u_device_table[] array. Notes: A retail sample of the Netgear AXE3000 (A8000) yeilds the following from lsusb D 0846:9060 NetGear, Inc. Wireless_Device. This pair 0846:9060 VID:PID has been reported by other users on Github. Signed-off-by: Reese Russell <git@qrsnap.io> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7915: drop redundant prefix of mt7915_txpower_puts()Ryder Lee
Just a cosmetic patch to drop redundant prefix for txpower ouput text. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: fix 6GHz high channel not be scannedMing Yen Hsieh
mt76 scan command only support 64 channels currently. If the channel count is larger than 64(for 2+5+6GHz), some channels will not be scanned. Hence change the scan type to full channel scan in case of the command cannot include proper list for chip. Fixes: 399090ef9605 ("mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module") Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Isaac Konikoff <konikofi@candelatech.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921e: fix probe timeout after rebootQuan Zhou
In system warm reboot scene, due to the polling timeout(now 1000us) is too short to wait dma idle in time, it may make driver probe fail with error code -ETIMEDOUT. Meanwhile, we also found the dma may take around 70ms to enter idle state. Change the polling idle timeout to 100ms to avoid the probabilistic probe fail. Tested pass with 5000 times warm reboot on x86 platform. [4.477496] pci 0000:01:00.0: attach allowed to drvr mt7921e [internal device] [4.478306] mt7921e 0000:01:00.0: ASIC revision: 79610010 [4.480063] mt7921e: probe of 0000:01:00.0 failed with error -110 Fixes: 0a1059d0f060 ("mt76: mt7921: move mt7921_dma_reset in dma.c") Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: move shared mac definitions in mt76_connac2_mac.hLorenzo Bianconi
Move some mac shared definitions between mt7996, mt7921 and mt7915 in mt76_connac2_mac.h. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: get rid of eeprom.hLorenzo Bianconi
eeprom.h is mostly empty for mt7921, so get rid of it. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: add mt76_connac_gen_ppe_thresh utility routineLorenzo Bianconi
gen_ppe_thresh routine is shared between mt7615, mt7915, mt7921 and mt7996 so move it in mt76_connac module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: get rid of unused sta_ps callbacksLorenzo Bianconi
sta_ps callback is just an empty stub for most of the drivers, so get rid of them. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: add mt76_connac_irq_enable utility routineLorenzo Bianconi
Most of connac based drivers (mt7921, mt7615, mt7663) share the same code to enable interrupts. Move it in mt76_connac module. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: move irq_tasklet in mt76_dev structLorenzo Bianconi
irq_tasklet struct is used by most of the drivers (e.g. mt7915, mt7921, mt7615, mt7663 and mt7996) so move it in common code. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17arm64: defconfig: enable building the nvmem-reboot-mode moduleBartosz Golaszewski
This module is used by the Qualcomm sa8775p platform for passing the reboot reason to the bootloader. Enable building it in the arm64 defconfig as a module. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-17arm64: defconfig: Enable TI ADC driverBhavya Kapoor
Enable ADC driver to be built as a module which will add support for ADC in TI K3 specific SoCs. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-17arm64: defconfig: Enable TI TSCADC driverBhavya Kapoor
Enable TSCADC driver to be built as a module which will add support for TI's TSC/ADC MFDevice. Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-17arm64: defconfig: Enable security accelerator driver for TI K3 SoCsKamlesh Gurudasani
Enable TI's SA2UL driver to support security acceleration on TI K3 SoCs. Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-17arm64: defconfig: Enable crypto test moduleKamlesh Gurudasani
Enable crypto test module, used for testing crypto engine performance. Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-17Merge tag 'asahi-soc-dt-6.4-v2' of https://github.com/AsahiLinux/linux into ↵Arnd Bergmann
soc/dt Apple SoC DT updates for 6.4 (v2). A late addition to the tree, adding the PWM controllers and associated keyboard backlight nodes, since that driver and its bindings are now on the way to 6.4. * tag 'asahi-soc-dt-6.4-v2' of https://github.com/AsahiLinux/linux: arm64: dts: apple: t8112: Add PWM controller arm64: dts: apple: t600x: Add PWM controller arm64: dts: apple: t8103: Add PWM controller Link: https://lore.kernel.org/r/d0862463-acb3-ce83-6493-281a833ec87e@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-17wifi: mt76: mt7921e: Set memory space enable in PCI_COMMAND if unsetMario Limonciello
When the BIOS has been configured for Fast Boot, systems with mt7921e have non-functional wifi. Turning on Fast boot caused both bus master enable and memory space enable bits in PCI_COMMAND not to get configured. The mt7921 driver already sets bus master enable, but explicitly check and set memory access enable as well to fix this problem. Tested-by: Anson Tsao <anson.tsao@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: use driver flags rather than mac80211 flags to mcuNeil Chen
FIF_* flags from mac80211 is not ABI. mt7921 should not pass it into mcu directly. Remap FIF_* to driver defined flags as mcu command input. Fixes: c222f77fd421 ("wifi: mt76: mt7921: fix rx filter incorrect by drv/fw inconsistent") Signed-off-by: Neil Chen <yn.chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: introduce mt7921_get_mac80211_ops utility routineLorenzo Bianconi
Since the fw offload capability check is shared between pci,usb and sdio devices, move it in common init code and reduce code duplication. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: fix eeprom tx path bitfieldsStanleyYP Wang
Swap the tx path bitfields of band1 and band2 to read correct setting. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: remove mt7996_mcu_set_pm()Peter Chiu
Currently using BSS_INFO_PS command will sometimes cause packet drop in hw rx queue. Temporarily remove this function until finding the cause. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: init mpdu density capPeter Chiu
Init mpdu density based on the hardware capability to prevent rx drop. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: fix pointer calculation in ie countdown eventPeter Chiu
Fix the tail and data pointers. The rxd->len in mt7996_mcu_rxd does not include the length of general rxd. It only includes the length of firmware event rxd. Use skb->length to get the correct length. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: remove unused eeprom band selectionShayne Chen
Tri-band chipsets support one band on each a-die, so remove the unused definition of eeprom band selection. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: let non-bufferable MMPDUs use correct hw queueShayne Chen
Pass qid into mt7996_mac_write_txwi() to let the tx descriptor of non-bufferable MMPDUs be filled with correct hw queue index. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: add eht rx rate supportShayne Chen
Add support to report eht rx rate. Note that extended fields for eht in mt76_rx_status will make the struct size exceed the cb size, so make nss and band share the same u8. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: remove mt7996_mcu_beacon_check_caps()Ryder Lee
Those capabilities have been added into ieee80211_bss_conf. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17Merge tag 'thermal-v6.4-rc1-2' of ↵Rafael J. Wysocki
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull more thermal control changes for 6.4-rc1 from Daniel Lezcano: "- Do preparating cleaning and DT bindings for RK3588 support (Sebastian Reichel) - Add driver support for RK3588 (Finley Xiao) - Use devm_reset_control_array_get_exclusive() for the Rockchip driver (Ye Xingchen) - Detect power gated thermal zones and return -EAGAIN when reading the temperature (Mikko Perttunen) - Remove thermal_bind_params structure as it is unused (Zhang Rui) - Drop unneeded quotes in DT bindings allowing to run yamllint (Rob Herring) - Update the power allocator documentation according to the thermal trace relocation (Lukas Bulwahn) - Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor (Chen-Yu Tsai) - Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen) - Add AP domain support to LVTS thermal controllers for mt8195 (Balsam CHIHI) - Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano) - Make thermal_of_zone_[un]register() private to the thermal OF code (Daniel Lezcano) - Create a private copy of the thermal zone device parameters structure when registering a thermal zone (Daniel Lezcano)" * tag 'thermal-v6.4-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/core: Alloc-copy-free the thermal zone parameters structure thermal/of: Unexport unused OF functions thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195 dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195 thermal: amlogic: Use dev_err_probe() thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement dt-bindings: thermal: Drop unneeded quotes thermal/core: Remove thermal_bind_params structure thermal/drivers/tegra-bpmp: Handle offline zones thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive() dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver thermal/drivers/rockchip: Support dynamic sized sensor array thermal/drivers/rockchip: Simplify channel id logic thermal/drivers/rockchip: Use dev_err_probe thermal/drivers/rockchip: Simplify clock logic thermal/drivers/rockchip: Simplify getting match data
2023-04-17Merge tag 'devfreq-next-for-6.4' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq updates for v6.4 from Chanwoo Choi: "1. Remove unneeded SRCU selection in Kconfig because it's always set from devfreq core. 2. Fix minor updates of devfreq drivers - Drop of_match_ptr macro from exynos-bus.c because this driver is always using the DT table for driver probe. - Use the preferred of_property_present instead of the low-level of_get_property on exynos-bus.c - Use devm_platform_get_and_ioream_resource on exyno-ppmu.c" * tag 'devfreq-next-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource() PM / devfreq: exynos: Use of_property_present() for testing DT property presence PM / devfreq: exyos-bus: drop of_match_ptr for ID table PM / devfreq: Remove "select SRCU"
2023-04-17wifi: mt76: mt7915: remove mt7915_mcu_beacon_check_caps()Ryder Lee
Those capabilities have been added into ieee80211_bss_conf. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: connac: refresh tx session timer for WED deviceRyder Lee
There's no keep-alive packet being received by mac80211 stack when WED is enabled, which leads to tx BA session timeout. This patch calls ieee80211_refresh_tx_agg_session_timer() to refresh timer according to tx status reporting. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17SUNRPC: Fix failures of checksum Kunit testsChuck Lever
Scott reports that when the new GSS krb5 Kunit tests are built as a separate module and loaded, the RFC 6803 and RFC 8009 checksum tests all fail, even though they pass when run under kunit.py. It appears that passing a buffer backed by static const memory to gss_krb5_checksum() is a problem. A printk in checksum_case() shows the correct plaintext, but by the time the buffer has been converted to a scatterlist and arrives at checksummer(), it contains all zeroes. Replacing this buffer with one that is dynamically allocated fixes the issue. Reported-by: Scott Mayhew <smayhew@redhat.com> Fixes: 02142b2ca8fc ("SUNRPC: Add checksum KUnit tests for the RFC 6803 encryption types") Tested-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-04-17wifi: mt76: add missing locking to protect against concurrent rx/status callsFelix Fietkau
According to the documentation, ieee80211_rx_list must not run concurrently with ieee80211_tx_status (or its variants). Cc: stable@vger.kernel.org Fixes: 88046b2c9f6d ("mt76: add support for reporting tx status with skb") Reported-by: Brian Coverstone <brian@mainsequence.net> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: handle failure of vzalloc in mt7615_coredump_workKang Chen
vzalloc may fails, dump might be null and will cause illegal address access later. Link: https://lore.kernel.org/all/Y%2Fy5Asxw3T3m4jCw@lore-desk Fixes: d2bf7959d9c0 ("mt76: mt7663: introduce coredump support") Signed-off-by: Kang Chen <void0red@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: drop the incorrect scatter and gather framePeter Chiu
The scatter and gather frame may be incorrect because WED and WO may send frames to host driver interleaved. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-24 04:36:11 +0000