summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-23serdev: Add method to assert break signal over tty UART portNeeraj Sanjay Kale
Adds serdev_device_break_ctl() and an implementation for ttyport. This function simply calls the break_ctl in tty layer, which can assert a break signal over UART-TX line, if the tty and the underlying platform and UART peripheral supports this operation. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23serdev: Replace all instances of ENOTSUPP with EOPNOTSUPPNeeraj Sanjay Kale
This replaces all instances of ENOTSUPP with EOPNOTSUPP since ENOTSUPP is not a standard error code. This will help maintain consistency in error codes when new serdev API's are added. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_ldisc: Fix tty_set_termios() return value assumptionsIlpo Järvinen
tty_set_termios() never returns anything else than 0. Make the debug prints to look directly into the new termios instead to check CRTSCTS state. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: Improve support for Actions Semi ATS2851 based devicesRaul Cheleguini
Add two more quirks to resume the device initialization and basic operation as the device seems not to support "Read Transmit Power" and "Set Extended Scan Parameters". < HCI Command: LE Read Transmit Power (0x08|0x004b) plen 0 > HCI Event: Command Status (0x0f) plen 4 LE Read Transmit Power (0x08|0x004b) ncmd 1 Status: Unknown HCI Command (0x01) < HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8 Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) PHYs: 0x01 Entry 0: LE 1M Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) > HCI Event: Command Status (0x0f) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Unknown HCI Command (0x01) Signed-off-by: Raul Cheleguini <rcheleguini@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btrtl: add support for the RTL8723CSVasily Khoruzhick
The Realtek RTL8723CS is a SDIO WiFi chip. It also contains a Bluetooth module which is connected via UART to the host. It shares lmp subversion with 8703B, so Realtek's userspace initialization tool (rtk_hciattach) differentiates varieties of RTL8723CS (CG, VF, XX) with RTL8703B using vendor's command to read chip type. Also this chip declares support for some features it doesn't support so add a quirk to indicate that these features are broken. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Bastian Germann <bage@debian.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: Add new quirk for broken local ext features page 2Vasily Khoruzhick
Some adapters (e.g. RTL8723CS) advertise that they have more than 2 pages for local ext features, but they don't support any features declared in these pages. RTL8723CS reports max_page = 2 and declares support for sync train and secure connection, but it responds with either garbage or with error in status on corresponding commands. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Bastian Germann <bage@debian.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btmtkuart: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/bluetooth/btmtkuart.c:971:36: error: ‘mt7668_data’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/btmtkuart.c:966:36: error: ‘mt7663_data’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/btmtkuart.c:962:36: error: ‘mt7622_data’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_qca: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/bluetooth/hci_qca.c:1869:37: error: ‘qca_soc_data_wcn6750’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/hci_qca.c:1853:37: error: ‘qca_soc_data_wcn3998’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/hci_qca.c:1841:37: error: ‘qca_soc_data_wcn3991’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/hci_qca.c:1830:37: error: ‘qca_soc_data_wcn3990’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btmrvl_sdio: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/bluetooth/btmrvl_sdio.c:43:34: error: ‘btmrvl_sdio_of_match_table’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_ll: drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/bluetooth/hci_ll.c:769:34: error: ‘hci_ti_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: L2CAP: Delay identity address updatesLuiz Augusto von Dentz
This delays the identity address updates to give time for userspace to process the new address otherwise there is a risk that userspace creates a duplicated device if the MGMT event is delayed for some reason. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_sync: Remove duplicate statementInga Stotland
This removes the following duplicate statement in hci_le_ext_directed_advertising_sync(): cp.own_addr_type = own_addr_type; Signed-off-by: Inga Stotland <inga.stotland@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: Convert MSFT filter HCI cmd to hci_syncBrian Gix
The msft_set_filter_enable() command was using the deprecated hci_request mechanism rather than hci_sync. This caused the warning error: hci0: HCI_REQ-0xfcf0 Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_sync: Don't wait peer's reply when powering offArchie Pusaka
Currently, when we initiate disconnection, we will wait for the peer's reply unless when we are suspending, where we fire and forget the disconnect request. A similar case is when adapter is powering off. However, we still wait for the peer's reply in this case. Therefore, if the peer is unresponsive, the command will time out and the power off sequence will fail, causing "bluetooth powered on by itself" to users. This patch makes the host doesn't wait for the peer's reply when the disconnection reason is powering off. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: Add VID/PID 0489/e0e4 for MediaTek MT7922Meng Tang
Tested on Acer Nitro AN515-47 Notebook output from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0e4 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Meng Tang <tangmeng@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23arm64: dts: rockchip: Update compatible for bluetoothChris Morgan
Update the compatible for the Realtek RTL8821CS bluetooth node. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_h5: btrtl: Add support for RTL8821CSChris Morgan
RTL8821CS is a WiFi + Bluetooth combo chip from Realtek that provides WiFi A/B/G/N/AC over an SDIO interface and Bluetooth 4.2 over a UART interface. Note that the firmware this was tested with was firmware version 0x75b8f098. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23dt-bindings: net: realtek-bluetooth: Add RTL8821CSChris Morgan
Add compatible string for RTL8821CS for existing Realtek Bluetooth driver. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alistair Francis <alistair@alistair23.me> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btusb: Add new PID/VID 04ca:3801 for MT7663Meng Tang
This bluetooth device is found in a combo WLAN/BT card for a MediaTek 7663. Tested on Acer Aspire A315-24P Notebook The device information: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3801 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Meng Tang <tangmeng@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_sync: Fix smatch warningLuiz Augusto von Dentz
This fixes the following new warning: net/bluetooth/hci_sync.c:2403 hci_pause_addr_resolution() warn: missing error code? 'err' Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202302251952.xryXOegd-lkp@intel.com/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_core: Make hci_conn_hash_add append to the listLuiz Augusto von Dentz
This makes hci_conn_hash_add append to the tail of the conn_hash so it matches the order they are created, this is required if the controller attempts to match the order of ACL with CIS which uses append logic when programming the CIS ids on the CIG. The result of this change affects Create CIS: Before: < HCI Command: LE Create Connected Isochronous Stream (0x08|0x0064) plen 9 Number of CIS: 2 CIS Handle: 2560 ACL Handle: 3586 CIS Handle: 2561 ACL Handle: 3585 After: < HCI Command: LE Create Connected Isochronous Stream (0x08|0x0064) plen 9 Number of CIS: 2 CIS Handle: 2560 ACL Handle: 3585 CIS Handle: 2561 ACL Handle: 3586 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btrtl: Add support for RTL8852BSVictor Hassan
Add the support for RTL8852BS BT controller on UART interface. The necessary firmware file will be submitted to linux-firmware. Signed-off-by: Victor Hassan <victor@allwinnertech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_mrvl: Add serdev support for 88W8997Stefan Eichenberger
Add serdev support for the 88W8997 from NXP (previously Marvell). It includes support for changing the baud rate. The command to change the baud rate is taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth interfaces) from NXP. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_mrvl: use maybe_unused macro for device tree idsStefan Eichenberger
Use the maybe_unused macro for the device tree ids instead of #ifdef CONFIG_OF. This makes it easier to add support for new devices. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23dt-bindings: bluetooth: marvell: add max-speed propertyStefan Eichenberger
The 88W8997 bluetooth module supports setting the max-speed property. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23dt-bindings: bluetooth: marvell: add 88W8997Stefan Eichenberger
Update the documentation with the device tree binding for the Marvell 88W8997 bluetooth device. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btusb: Do not require hardcoded interface numbersTomasz Moń
Remove hardcoded interface number check because Bluetooth specification since version 4.0 only recommends and no longer requires specific interface numbers. While earlier Bluetooth versions, i.e. 2.1 + EDR and 3.0 + HS, contain required configuration table in Volume 4 - Host Controller Interface Part B - USB Transport Layer, Bluetooth Core Specification Addendum 2 changes the table from required to recommended configuration. Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: MGMT: Use BIT macro when defining bitfieldsLuiz Augusto von Dentz
This makes use of BIT macro when defining bitfields which makes it clearer what bit it is toggling. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-24Merge tag 'exynos-drm-next-for-v6.4-2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next A patch series for implementing fbdev emulation as in-kernel client. - This patch series refactors fbdev callbacks to DRM client functions and simplifies fbdev emulation initialization including some code cleanups. The changes make fbdev emulation behave like a regular DRM client. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230417100624.35229-1-inki.dae@samsung.com
2023-04-24Merge tag 'drm-intel-next-fixes-2023-04-20-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Active port PLL MST fix for second stream, CSC plane index fix, null and oob array deref fixes and selftest memory leak fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZEDz9ZedyZVyFXxU@jlahtine-mobl.ger.corp.intel.com
2023-04-23Linux 6.3v6.3Linus Torvalds
2023-04-23Merge branch 'net-sched-parsing-prints'David S. Miller
Pedro Tammela says: ==================== net/sched: cleanup parsing prints in htb and qfq These two qdiscs are still using prints on dmesg to report parsing errors. Since the parsing code has access to extack, convert these error messages to extack. QFQ also had the opportunity to remove some redundant code in the parameters parsing by transforming some attributes into parsing policies. v4->v5: Rebased v3->v4: Drop 'BITification' as suggested by Eric v2->v3: Address suggestions by Jakub and Simon v1->v2: Address suggestions by Jakub ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23selftests: tc-testing: add more tests for sch_qfqPedro Tammela
The QFQ qdisc class has parameter bounds that are not being checked for correctness. Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23net/sched: sch_qfq: refactor parsing of netlink parametersPedro Tammela
Two parameters can be transformed into netlink policies and validated while parsing the netlink message. Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23net/sched: sch_qfq: use extack on errors messagesPedro Tammela
Some error messages are still being printed to dmesg. Since extack is available, provide error messages there. Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23net/sched: sch_htb: use extack on errors messagesPedro Tammela
Some error messages are still being printed to dmesg. Since extack is available, provide error messages there. Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23Merge branch 'act_pedit-minor-improvements'David S. Miller
Pedro Tammela says: ==================== net/sched: act_pedit: minor improvements This series aims to improve the code and usability of act_pedit for netlink users. Patches 1-2 improves error reporting for extended keys parsing with extack. Patch 3 checks the static offsets a priori on create/update. Currently, this is done at the datapath for both static and runtime offsets. Patch 4 removes a check from the datapath which is redundant since the netlink parsing validates the key types. Patch 5 changes the 'pr_info()' calls in the datapath to rate limited versions. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23net/sched: act_pedit: rate limit datapath messagesPedro Tammela
Unbounded info messages in the pedit datapath can flood the printk ring buffer quite easily depending on the action created. As these messages are informational, usually printing some, not all, is enough to bring attention to the real issue. Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23net/sched: act_pedit: remove extra check for key typePedro Tammela
The netlink parsing already validates the key 'htype'. Remove the datapath check as it's redundant. Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23net/sched: act_pedit: check static offsets a prioriPedro Tammela
Static key offsets should always be on 32 bit boundaries. Validate them on create/update time for static offsets and move the datapath validation for runtime offsets only. iproute2 already errors out if a given offset and data size cannot be packed to a 32 bit boundary. This change will make sure users which create/update pedit instances directly via netlink also error out, instead of finding out when packets are traversing. Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23net/sched: act_pedit: use extack in 'ex' parsing errorsPedro Tammela
We have extack available when parsing 'ex' keys, so pass it to tcf_pedit_keys_ex_parse and add more detailed error messages. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23net/sched: act_pedit: use NLA_POLICY for parsing 'ex' keysPedro Tammela
Transform two checks in the 'ex' key parsing into netlink policies removing extra if checks. Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-23gcc: disable '-Warray-bounds' for gcc-13 tooLinus Torvalds
We started disabling '-Warray-bounds' for gcc-12 originally on s390, because it resulted in some warnings that weren't realistically fixable (commit 8b202ee21839: "s390: disable -Warray-bounds"). That s390-specific issue was then found to be less common elsewhere, but generic (see f0be87c42cbd: "gcc-12: disable '-Warray-bounds' universally for now"), and then later expanded the version check was expanded to gcc-11 (5a41237ad1d4: "gcc: disable -Warray-bounds for gcc-11 too"). And it turns out that I was much too optimistic in thinking that it's all going to go away, and here we are with gcc-13 showing all the same issues. So instead of expanding this one version at a time, let's just disable it for gcc-11+, and put an end limit to it only when we actually find a solution. Yes, I'm sure some of this is because the kernel just does odd things (like our "container_of()" use, but also knowingly playing games with things like linker tables and array layouts). And yes, some of the warnings are likely signs of real bugs, but when there are hundreds of false positives, that doesn't really help. Oh well. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-04-23media: Adjust column width for pdfdocsAkira Yokosawa
The column width specifiers added in commit 8d0e3fc61abd ("media: Add 2-10-10-10 RGB formats") don't suffice for column 1 and too wide for column 2. Adjust them to get a good looking table. Fixes: 8d0e3fc61abd ("media: Add 2-10-10-10 RGB formats") Cc: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/f94e3ada-212c-eef7-9e7b-03760bb29521@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-04-23media: Fix building pdfdocsTomi Valkeinen
Commit 8d0e3fc61abd ("media: Add 2-10-10-10 RGB formats") added documentation for a few new RGB formats. The table has column-width specifiers for 34 columns used in pdfdocs build. However, the new table has a couple of rows with 35 columns which confused Sphinx's latex builder. The resulting .tex file causes an error in a later stage of a pdfdocs build. Remove the trailing empty dash lines to fix the issue. Fixes: 8d0e3fc61abd ("media: Add 2-10-10-10 RGB formats") Reported-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/12250823-8445-5854-dfb8-b92c0ff0851e@gmail.com/ Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Akira Yokosawa <akiyks@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> [akiyks: explain the cause of build error] Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Link: https://lore.kernel.org/r/29380b3e-1daa-3aef-1749-dbd9960ba620@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-04-23hwmon: lochnagar: Remove the unneeded include <linux/i2c.h>Christophe JAILLET
This driver does not use i2c, so there is no point in including <linux/i2c.h> Remove it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/df555e724d1b52bd9958c0bd729a774dfe0cf150.1682237387.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-04-23Merge tag 'kbuild-fixes-v6.3-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix the prefix in the kernel source tarball - Fix a typo in the copyright file in Debian package * tag 'kbuild-fixes-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: use proper prefix for tarballs to fix rpm-pkg build error kbuild: deb-pkg: Fix a spell typo in mkdebian script
2023-04-23Merge tag 'irq_urgent_for_v6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: - Remove an over-zealous sanity check of the array of MSI-X vectors to be allocated for a device * tag 'irq_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Remove over-zealous hardware size check in pci_msix_validate_entries()
2023-04-23Merge tag 'x86_urgent_for_v6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov - Fix for older binutils which do not support C-syntax constant suffixes * tag 'x86_urgent_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Do not use integer constant suffixes in inline asm
2023-04-23Merge tag 'input-for-v6.3-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a check in pegasus-notetaker driver to validate the type of pipe when probing a new device - a fix for Cypress touch controller to correctly parse maximum number of touches. * tag 'input-for-v6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyttsp5 - fix sensing configuration data structure Input: pegasus-notetaker - check pipe type when probing
generated by cgit (git 2.34.1) at 2025-09-16 20:48:43 +0000