| Age | Commit message (Collapse) | Author |
|---|
|
Update the device-mapper core to support exposing the inline crypto
support of the underlying device(s) through the device-mapper device.
This works by creating a "passthrough keyslot manager" for the dm
device, which declares support for encryption settings which all
underlying devices support. When a supported setting is used, the bio
cloning code handles cloning the crypto context to the bios for all the
underlying devices. When an unsupported setting is used, the blk-crypto
fallback is used as usual.
Crypto support on each underlying device is ignored unless the
corresponding dm target opts into exposing it. This is needed because
for inline crypto to semantically operate on the original bio, the data
must not be transformed by the dm target. Thus, targets like dm-linear
can expose crypto support of the underlying device, but targets like
dm-crypt can't. (dm-crypt could use inline crypto itself, though.)
A DM device's table can only be changed if the "new" inline encryption
capabilities are a (*not* necessarily strict) superset of the "old" inline
encryption capabilities. Attempts to make changes to the table that result
in some inline encryption capability becoming no longer supported will be
rejected.
For the sake of clarity, key eviction from underlying devices will be
handled in a future patch.
Co-developed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Introduce blk_ksm_update_capabilities() to update the capabilities of
a keyslot manager (ksm) in-place. The pointer to a ksm in a device's
request queue may not be easily replaced, because upper layers like
the filesystem might access it (e.g. for programming keys/checking
capabilities) at the same time the device wants to replace that
request queue's ksm (and free the old ksm's memory). This function
allows the device to update the capabilities of the ksm in its request
queue directly. Devices can safely update the ksm this way without any
synchronization with upper layers *only* if the updated (new) ksm
continues to support all the crypto capabilities that the old ksm did
(see description below for blk_ksm_is_superset() for why this is so).
Also introduce blk_ksm_is_superset() which checks whether one ksm's
capabilities are a (not necessarily strict) superset of another ksm's.
The blk-crypto framework requires that crypto capabilities that were
advertised when a bio was created continue to be supported by the
device until that bio is ended - in practice this probably means that
a device's advertised crypto capabilities can *never* "shrink" (since
there's no synchronization between bio creation and when a device may
want to change its advertised capabilities) - so a previously
advertised crypto capability must always continue to be supported.
This function can be used to check that a new ksm is a valid
replacement for an old ksm.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The device mapper may map over devices that have inline encryption
capabilities, and to make use of those capabilities, the DM device must
itself advertise those inline encryption capabilities. One way to do this
would be to have the DM device set up a keyslot manager with a
"sufficiently large" number of keyslots, but that would use a lot of
memory. Also, the DM device itself has no "keyslots", and it doesn't make
much sense to talk about "programming a key into a DM device's keyslot
manager", so all that extra memory used to represent those keyslots is just
wasted. All a DM device really needs to be able to do is advertise the
crypto capabilities of the underlying devices in a coherent manner and
expose a way to evict keys from the underlying devices.
There are also devices with inline encryption hardware that do not
have a limited number of keyslots. One can send a raw encryption key along
with a bio to these devices (as opposed to typical inline encryption
hardware that require users to first program a raw encryption key into a
keyslot, and send the index of that keyslot along with the bio). These
devices also only need the same things from the keyslot manager that DM
devices need - a way to advertise crypto capabilities and potentially a way
to expose a function to evict keys from hardware.
So we introduce a "passthrough" keyslot manager that provides a way to
represent a keyslot manager that doesn't have just a limited number of
keyslots, and for which do not require keys to be programmed into keyslots.
DM devices can set up a passthrough keyslot manager in their request
queues, and advertise appropriate crypto capabilities based on those of the
underlying devices. Blk-crypto does not attempt to program keys into any
keyslots in the passthrough keyslot manager. Instead, if/when the bio is
resubmitted to the underlying device, blk-crypto will try to program the
key into the underlying device's keyslot manager.
Signed-off-by: Satya Tangirala <satyat@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Metadata resize shouldn't happen in the ctr. The ctr loads a temporary
(inactive) table that will only become active upon resume. That is why
resize should always be done in terms of resume. Otherwise a load (ctr)
whose inactive table never becomes active will incorrectly resize the
metadata.
Also, perform the resize directly in preresume, instead of using the
worker to do it.
The worker might run other metadata operations, e.g., it could start
digestion, before resizing the metadata. These operations will end up
using the old size.
This could lead to errors, like:
device-mapper: era: metadata_digest_transcribe_writeset: dm_array_set_value failed
device-mapper: era: process_old_eras: digest step failed, stopping digestion
The reason of the above error is that the worker started the digestion
of the archived writeset using the old, larger size.
As a result, metadata_digest_transcribe_writeset tried to write beyond
the end of the era array.
Fixes: eec40579d84873 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
We use the assigned slot in io_sqe_file_register(), and a previous
patch moved the assignment to after we have called it. This isn't
super pretty, and will get cleaned up in the future. For now, fix
the regression by restoring the previous assignment/clear of the
file_slot.
Fixes: ea64ec02b31d ("io_uring: deduplicate file table slot calculation")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a test for the perf daemon 'lock' command ensuring only one instance
of daemon can run over one base directory.
Committer testing:
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 793255
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [793506]'
signal 12 sent to session 'test [793506]'
test daemon ping
test daemon lock
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-25-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test for the perf daemon 'ping' command. The tests verifies the
ping command gets proper answer from sessions.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 792143
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [792415]'
signal 12 sent to session 'test [792415]'
test daemon ping
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-24-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test for the perf daemon 'signal' command. The test sends a signal
to configured sessions and verifies the perf data files were generated
accordingly.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 790017
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [790268]'
signal 12 sent to session 'test [790268]'
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test for the perf daemon 'stop' command. The test stops the daemon
and verifies all the configured sessions are properly terminated.
Committer testing:
[root@five ~]# time perf test daemon
76: daemon operations : Ok
[root@five ~]# time perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 788560
test daemon list
test daemon reconfig
test daemon stop
test child finished with 0
---- end ----
daemon operations: Ok
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-22-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test for daemon reconfiguration. The test changes the
configuration file and checks that the session is changed properly.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]# time perf test daemon
76: daemon operations : Ok
real 0m6.055s
user 0m0.174s
sys 0m0.147s
[root@five ~]# time perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 786863
test daemon list
test daemon reconfig
test child finished with 0
---- end ----
daemon operations: Ok
real 0m6.127s
user 0m0.222s
sys 0m0.165s
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add test for basic perf daemon listing via the CSV output mode (-x
option).
Check that the configured sessions display expected values.
Committer testing:
[root@five ~]# perf test daemon
76: daemon operations : Ok
[root@five ~]#
[root@five ~]# perf test -v daemon
76: daemon operations :
--- start ---
test child forked, pid 785037
test daemon list
test child finished with 0
---- end ----
daemon operations: Ok
[root@five ~]#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add usage examples to the man page.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Display up time for both daemon and sessions.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Starting the daemon:
# perf daemon start
Get the details with up time:
# perf daemon -v
[778315:daemon] base: /opt/perfdata
output: /opt/perfdata/output
lock: /opt/perfdata/lock
up: 15 minutes
[778316:cycles] perf record -m 20M -e cycles --overwrite --switch-output -a
base: /opt/perfdata/session-cycles
output: /opt/perfdata/session-cycles/output
control: /opt/perfdata/session-cycles/control
ack: /opt/perfdata/session-cycles/ack
up: 10 minutes
[778317:sched] perf record -m 20M -e sched:* --overwrite --switch-output -a
base: /opt/perfdata/session-sched
output: /opt/perfdata/session-sched/output
control: /opt/perfdata/session-sched/control
ack: /opt/perfdata/session-sched/ack
up: 2 minutes
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the 'stop' control command to stop perf record session. If that
fails, fall back to current SIGTERM/SIGKILL pair.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a 'ping' command to verify that the 'perf record' session is up and
operational.
It's used in the following patches via test code to make sure 'perf
record' is ready to receive signals.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Start the daemon:
# perf daemon start
Ping all sessions:
# perf daemon ping
OK cycles
OK sched
Ping specific session:
# perf daemon ping --session sched
OK sched
Committer notes:
Fixed up bug pointed by clang:
Buggy:
if (!pollfd.revents & POLLIN)
Correct code:
if (!(pollfd.revents & POLLIN))
clang warning:
builtin-daemon.c:560:6: error: logical not is only applied to the left hand side of this bitwise operator [-Werror,-Wlogical-not-parentheses]
if (!pollfd.revents & POLLIN) {
^ ~
builtin-daemon.c:560:6: note: add parentheses after the '!' to evaluate the bitwise operator first
Also use designated initialized with pollfd, i.e.:
struct pollfd pollfd = { .events = POLLIN, };
Instead of:
struct pollfd pollfd = { 0, };
To get past:
builtin-daemon.c:510:30: error: missing field 'events' initializer [-Werror,-Wmissing-field-initializers]
struct pollfd pollfd = { 0, };
^
1 error generated.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Setup control fifos for session and add --control option to session
arguments.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Starting the daemon:
# perf daemon start
Use can list control fifos with (control and ack files):
# perf daemon -v
[776459:daemon] base: /opt/perfdata
output: /opt/perfdata/output
lock: /opt/perfdata/lock
[776460:cycles] perf record -m 20M -e cycles --overwrite --switch-output -a
base: /opt/perfdata/session-cycles
output: /opt/perfdata/session-cycles/output
control: /opt/perfdata/session-cycles/control
ack: /opt/perfdata/session-cycles/ack
[776461:sched] perf record -m 20M -e sched:* --overwrite --switch-output -a
base: /opt/perfdata/session-sched
output: /opt/perfdata/session-sched/output
control: /opt/perfdata/session-sched/control
ack: /opt/perfdata/session-sched/ack
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add 'lock' file under daemon base and flock it, so only one perf daemon
can run on top of it.
Each daemon tries to create and lock BASE/lock file, if it's successful
we are sure we're the only daemon running over the BASE.
Once daemon is finished, file descriptor to lock file is closed and lock
is released.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Starting the daemon:
# perf daemon start
And try once more:
# perf daemon start
failed: another perf daemon (pid 775594) owns /opt/perfdata
will end up with an error, because there's already one running
on top of /opt/perfdata.
Committer notes:
Provide lockf(F_TLOCK) when not available, i.e. transform:
lockf(fd, F_TLOCK, 0);
into:
flock(fd, LOCK_EX | LOCK_NB);
Which should be equivalent.
Noticed when cross building to some odd Android NDK.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It is safer to disable the QSPI IP at suspend, in order to avoid
possible impact of glitches on the internal FSMs. This is a theoretical
fix, there were no problems seen as of now. Tested on sama5d2 and
sam9x60 versions of the IP.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210210135428.204134-1-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the binding documentation for the optional sd-vsel GPIO.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210211105534.38972-2-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
By default the PCA9450 doesn't handle the assertion of the WDOG_B
signal, but this is required to guarantee that things like software
resets triggered by the watchdog work reliably.
As we don't want to rely on the bootloader to enable this, we tell
the PMIC to issue a cold reset in case the WDOG_B signal is
asserted (WDOG_B_CFG = 10), just as the NXP U-Boot code does.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210211105534.38972-3-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
LDO5 has two separate control registers. LDO5CTRL_L is used if the
input signal SD_VSEL is low and LDO5CTRL_H if it is high.
The current driver implementation only uses LDO5CTRL_H. To make this
work on boards that have SD_VSEL connected to a GPIO, we add support
for specifying an optional GPIO and setting it to high at probe time.
In the future we might also want to add support for boards that have
SD_VSEL set to a fixed low level. In this case we need to change the
driver to be able to use the LDO5CTRL_L register.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210211105534.38972-1-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds dapm widgets and routes on this codec
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-8-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Qualcomm LPASS (Low Power Audio SubSystem) has internal codec
TX macro block which is used for connecting with external
Soundwire TX Codecs like WCD938x.
This patch adds support to the codec part of the TX Macro block
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-7-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This binding is for LPASS has internal codec TX macro which is
for connecting with Soundwire TX codecs like WCD938x.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210211122735.5691-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds iir widgets and mixers on this codec
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds dapm widgets and routes on this codec
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
LPASS RX Codec Macro is available in Qualcomm LPASS (Low Power Audio SubSystem).
This is used for connecting with SoundWire devices like WCD938x Codecs to provide
headphone/ear/lineout functionality.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210211122735.5691-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This binding is for LPASS has internal codec RX macro which is
for connecting with SoundWire RX codecs like WCD938x.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210211122735.5691-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
An endpoint is not a device and it is recommended to use clocks property
in the device node. Hence reverting the original change.
Fixes: 531e5b7abbde ("ASoC: audio-graph-card: Add clocks property to endpoint node")
Suggested-by: Rob Herring <robh@kernel.org>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1612939421-19900-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If "clocks = <&xxx>" is specified from the CPU or Codec component
device node, the clock is not getting enabled. Thus audio playback
or capture fails.
Fix this by populating "simple_dai->clk" field when clocks property
is specified from device node as well. Also tidy up by re-organising
conditional statements of parsing logic.
Fixes: bb6fc620c2ed ("ASoC: simple-card-utils: add asoc_simple_card_parse_clk()")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1612939421-19900-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the correct name to avoid ldo7 commands being sent to ldo6's address.
Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210211034935.5622-1-jonathan@marek.ca
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a 2 byte pad to struct compat_vcpu_info so that the sum size of its
fields is actually 64 bytes. The effective size without the padding is
also 64 bytes due to the compiler aligning evtchn_pending_sel to a 4-byte
boundary, but depending on compiler alignment is subtle and unnecessary.
Opportunistically replace spaces with tables in the other fields.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-6-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add 'perf daemon stop' command to stop daemon process and all running
sessions.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Start the daemon:
# perf daemon start
Stop the daemon
# perf daemon stop
Daemon is not running, nothing to connect to:
# perf daemon
connect error: Connection refused
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow the 'perf daemon' to send SIGUSR2 to all running sessions or just
to a specific session.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Start the daemon:
# perf daemon start
Send signal to all running sessions:
# perf daemon signal
signal 12 sent to session 'cycles [773738]'
signal 12 sent to session 'sched [773739]'
Or to specific one:
# perf daemon signal --session sched
signal 12 sent to session 'sched [773739]'
And verify signals were delivered and perf.data dumped:
# cat /opt/perfdata/session-cycles/output
rounding mmap pages size to 32M (8192 pages)
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2021010220382490 ]
# car /opt/perfdata/session-sched/output
rounding mmap pages size to 32M (8192 pages)
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2021010220382489 ]
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2021010220393745 ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a 'list' command to display all running sessions. It's the default
command if no other command is specified.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
Start the daemon:
# perf daemon start
List sessions:
# perf daemon
[771394:daemon] base: /opt/perfdata
[771395:cycles] perf record -m 10M -e cycles --overwrite --switch-output -a
[771396:sched] perf record -m 20M -e sched:* --overwrite --switch-output -a
List sessions with more info:
# perf daemon -v
[771394:daemon] base: /opt/perfdata
output: /opt/perfdata/output
[771395:cycles] perf record -m 10M -e cycles --overwrite --switch-output -a
base: /opt/perfdata/session-cycles
output: /opt/perfdata/session-cycles/output
[771396:sched] perf record -m 20M -e sched:* --overwrite --switch-output -a
base: /opt/perfdata/session-sched
output: /opt/perfdata/session-sched/output
The 'output' file is perf record output for specific session.
Note you have to stop all running perf processes manually at this point,
stop command is coming in following patches.
Committer notes:
Fixup union initialization to overcome this in multiple older systems:
22 15.74 debian:8 : FAIL gcc version 4.9.2 (Debian 4.9.2-10+deb8u2)
builtin-daemon.c: In function 'send_cmd_list':
builtin-daemon.c:1386:2: error: missing initializer for field 'csv_sep' of 'struct <anonymous>' [-Werror=missing-field-initializers]
};
^
builtin-daemon.c:641:8: note: 'csv_sep' declared here
char csv_sep;
^
cc1: all warnings being treated as errors
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use a signalfd fd to track SIGCHLD signals as notifications for perf
session termination.
This way we don't need to actively check for child status, being
notified if there's change.
Suggested-by: Alexei Budankov <abudankov@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support to put the daemon process in the background.
It's now enabled by default and -f option is added to keep the daemon
process on the console for debugging.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support to detect changes to the daemon's config file triggering a
re-read of the configuration when that happens.
Use a inotify file descriptor plugged into the main fdarray object for
polling.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
Starting the daemon:
# perf daemon start
Check sessions:
# perf daemon
[772262:daemon] base: /opt/perfdata
[772263:cycles] perf record -m 10M -e cycles --overwrite --switch-output -a
Change '-m 10M' to '-m 20M', and check daemon log:
# tail -f /opt/perfdata/output
[2021-01-02 20:31:41.234045] daemon started (pid 772262)
[2021-01-02 20:31:41.235072] reconfig: ruining session [cycles:772263]: -m 10M -e cycles --overwrite --switch-output -a
[2021-01-02 20:32:08.310137] reconfig: session 'cycles' killed
[2021-01-02 20:32:08.310847] reconfig: ruining session [cycles:772338]: -m 20M -e cycles --overwrite --switch-output -a
And the session list:
# perf daemon
[772262:daemon] base: /opt/perfdata
[772338:cycles] perf record -m 20M -e cycles --overwrite --switch-output -a
Note the changed '-m 20M' option is in place.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding support to configure daemon with config file.
Each client or server invocation of perf daemon needs to know the
base directory, where all sessions data is stored.
The base is defined with:
daemon.base
Base path for daemon data. All sessions data are stored under
this path.
The daemon allows to create record sessions. Each session is a
record command spawned and monitored by perf daemon.
The session is defined with:
session-<NAME>.run
Defines new record session for daemon. The value is record's
command line without the 'record' keyword.
Example:
# cat ~/.perfconfig
[daemon]
base=/opt/perfdata
[session-cycles]
run = -m 10M -e cycles --overwrite --switch-output -a
[session-sched]
run = -m 20M -e sched:* --overwrite --switch-output -a
The example above defines '/opt/perfdata' as the base directory and 2
record sessions.
# perf daemon start
[2021-01-28 19:47:33.454413] daemon started (pid 16015)
[2021-01-28 19:47:33.455910] reconfig: ruining session [cycles:16016]: -m 10M -e cycles --overwrite --switch-output -a
[2021-01-28 19:47:33.456599] reconfig: ruining session [sched:16017]: -m 20M -e sched:* --overwrite --switch-output -a
# ps -ef | grep perf
... perf daemon start
... /home/jolsa/.../perf record -m 20M -e cycles --overwrite --switch-output -a
... /home/jolsa/.../perf record -m 20M -e sched:* --overwrite --switch-output -a
The base directory is populated with:
# find /opt/perfdata/
/opt/perfdata/
/opt/perfdata/control <- control socket
/opt/perfdata/session-cycles <- data for session 'cycles':
/opt/perfdata/session-cycles/output <- perf record output
/opt/perfdata/session-cycles/perf.data <- perf data
/opt/perfdata/session-sched <- ditto for session 'sched'
/opt/perfdata/session-sched/output
/opt/perfdata/session-sched/perf.data
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lore.kernel.org/r/20210208200908.1019149-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Don't bother mapping the Xen shinfo pages into the guest, they don't need
to be accessed using the GVAs and passing a define with "GPA" in the name
to addr_gva2hpa() is confusing.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-5-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Xen shinfo selftest uses '40' when setting the GPA of the vCPU info
struct, but checks for the result at '0x40'. Arbitrarily use the hex
version to resolve the bug.
Fixes: 8d4e7e80838f ("KVM: x86: declare Xen HVM shared info capability and add test case")
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-4-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For better or worse, the memslot APIs take the number of pages, not the
size in bytes. The Xen tests need 2 pages, not 8192 pages.
Fixes: 8d4e7e80838f ("KVM: x86: declare Xen HVM shared info capability and add test case")
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-3-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the new Xen test binaries to KVM selftest's .gitnore.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210182609.435200-2-seanjc@google.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fixes: 678e90a349a4 ("KVM: selftests: Test IPI to halted vCPU in xAPIC while backing page moves")
Cc: Andrew Jones <drjones@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Peter Shier <pshier@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210210011747.240913-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Building the KVM selftests with LLVM's integrated assembler fails with:
$ CFLAGS=-fintegrated-as make -C tools/testing/selftests/kvm CC=clang
lib/x86_64/svm.c:77:16: error: too few operands for instruction
asm volatile ("vmsave\n\t" : : "a" (vmcb_gpa) : "memory");
^
<inline asm>:1:2: note: instantiated into assembly here
vmsave
^
lib/x86_64/svm.c:134:3: error: too few operands for instruction
"vmload\n\t"
^
<inline asm>:1:2: note: instantiated into assembly here
vmload
^
This is because LLVM IAS does not currently support calling vmsave,
vmload, or vmload without an explicit %rax operand.
Add an explicit operand to vmsave, vmload, and vmrum in svm.c. Fixing
this was suggested by Sean Christopherson.
Tested: building without this error in clang 11. The following patch
(not queued yet) needs to be applied to solve the other remaining error:
"selftests: kvm: remove reassignment of non-absolute variables".
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/X+Df2oQczVBmwEzi@google.com/
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Message-Id: <20210210031719.769837-1-ricarkol@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The sparse tool complains as follows:
arch/x86/kvm/svm/svm.c:204:6: warning:
symbol 'svm_gp_erratum_intercept' was not declared. Should it be static?
This symbol is not used outside of svm.c, so this
commit marks it static.
Fixes: 82a11e9c6fa2b ("KVM: SVM: Add emulation support for #GP triggered by SVM instructions")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20210210075958.1096317-1-weiyongjun1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
PPC KVM update for 5.12
- Support for second data watchpoint on POWER10, from Ravi Bangoria
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes from Nick Piggin and Fabiano Rosas
|
|
include/asm-generic/qrwlock.h was trying to get arch_spin_is_locked via
asm-generic/qspinlock.h. However, this does not work because architectures
might be using queued rwlocks but not queued spinlocks (csky), or because they
might be defining their own queued_* macros before including asm/qspinlock.h.
To fix this, ensure that asm/spinlock.h always includes qrwlock.h after
defining arch_spin_is_locked (either directly for csky, or via
asm/qspinlock.h for other architectures). The only inclusion elsewhere
is in kernel/locking/qrwlock.c. That one is really unnecessary because
the file is only compiled in SMP configurations (config QUEUED_RWLOCKS
depends on SMP) and in that case linux/spinlock.h already includes
asm/qrwlock.h if needed, via asm/spinlock.h.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Waiman Long <longman@redhat.com>
Fixes: 26128cb6c7e6 ("locking/rwlocks: Add contention detection for rwlocks")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ben Gardon <bgardon@google.com>
[Add arch/sparc and kernel/locking parts per discussion with Waiman. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Mark the acrn-dev mailing list as subscribers-only.
Evidence from a previous patch:
acrn-dev@lists.projectacrn.org
SMTP error from remote mail server after end of data:
510 5.1.1 Your email address, rdunlap@infradead.org, is not subscribed to that group.
Cc: Shuo Liu <shuo.a.liu@intel.com>
Cc: acrn-dev@lists.projectacrn.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210210183433.18746-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In this particular case, the struct element is already flexible struct.
Thus struct element ie[] is ambiguous inside another struct. The members
of struct element ie aren't being accessed in code anywhere. The data of
u8 type is copied in it. So it has been changed to u8 ie[] to make the
sparse happy and code simple.
Warning from sparse:
drivers/stagingwfx/hif_tx.c: note: in included file (through drivers/stagingwfx/data_tx.h, drivers/staging//wfx/wfx.h):
drivers/staging//wfx/hif_api_cmd.h:103:26: warning: array of flexible structures
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Link: https://lore.kernel.org/r/20210211105026.GA45458@LEGION
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
