summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-09drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_finiHoratio Zhang
The gmc.ecc_irq is enabled by firmware per IFWI setting, and the host driver is not privileged to enable/disable the interrupt. So, it is meaningless to use the amdgpu_irq_put function in gmc_v11_0_hw_fini, which also leads to the call trace. [ 102.980303] Call Trace: [ 102.980303] <TASK> [ 102.980304] gmc_v11_0_hw_fini+0x54/0x90 [amdgpu] [ 102.980357] gmc_v11_0_suspend+0xe/0x20 [amdgpu] [ 102.980409] amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu] [ 102.980459] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 102.980520] amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu] [ 102.980573] amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu] [ 102.980687] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 102.980740] process_one_work+0x21f/0x3f0 [ 102.980741] worker_thread+0x200/0x3e0 [ 102.980742] ? process_one_work+0x3f0/0x3f0 [ 102.980743] kthread+0xfd/0x130 [ 102.980743] ? kthread_complete_and_exit+0x20/0x20 [ 102.980744] ret_from_fork+0x22/0x30 Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Enable doorbell selfring after resize FB BARShane Xiao
[Why] The selfring doorbell aperture will change when resize FB BAR successfully during gmc sw init, we should reorder the sequence of enabling doorbell selfring aperture. [How] Move enable_doorbell_selfring_aperture from *_common_hw_init to *_common_late_init. This fixes the potential issue that GPU ring its own doorbell when this device is in translated mode when iommu is on. v2: Remove *_enable_doorbell_aperture functions (Christian) v3: Add comments to note that why we need enable doorbell selfring late (Christian) Signed-off-by: Shane Xiao <shane.xiao@amd.com> Signed-off-by: Aaron Liu <aaron.liu@amd.com> Tested-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: Christian K�nig <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/amdgpu: Fix style errors in amdgpu_display.cSrinivasan Shanmugam
Fix following checkpatch errors in amdgpu_display.c ERROR: spaces required around that '=' (ctx:VxW) ERROR: that open brace { should be on the previous line ERROR: else should follow close brace '}' Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: DSC passthrough is for DP-HDMI pcon (SST pcon)Srinivasan Shanmugam
if check over DSC passthrough is removed, as this is not for MST use case. It is for DP-HDMI pcon use case. sst pcon is detected as sst not mst. In sst pcon dsc passthrough message will not get below log printed Fixes: 9b035d089086 ("drm/amd/display: Check & log if receiver supports MST, DSC & FEC.") Suggested-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Use the default reset when loading or reloading the driverlyndonli
Below call trace and errors are observed when reloading amdgpu driver with the module parameter reset_method=3. It should do a default reset when loading or reloading the driver, regardless of the module parameter reset_method. v2: add comments inside and modify commit messages. [ +2.180243] [drm] psp gfx command ID_LOAD_TOC(0x20) failed and response status is (0x0) [ +0.000011] [drm:psp_hw_start [amdgpu]] *ERROR* Failed to load toc [ +0.000890] [drm:psp_hw_start [amdgpu]] *ERROR* PSP tmr init failed! [ +0.020683] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to clear memory with ring turned off. [ +0.000003] RIP: 0010:amdgpu_bo_release_notify+0x1ef/0x210 [amdgpu] [ +0.000004] Call Trace: [ +0.000003] <TASK> [ +0.000008] ttm_bo_release+0x2c4/0x330 [amdttm] [ +0.000026] amdttm_bo_put+0x3c/0x70 [amdttm] [ +0.000020] amdgpu_bo_free_kernel+0xe6/0x140 [amdgpu] [ +0.000728] psp_v11_0_ring_destroy+0x34/0x60 [amdgpu] [ +0.000826] psp_hw_init+0xe7/0x2f0 [amdgpu] [ +0.000813] amdgpu_device_fw_loading+0x1ad/0x2d0 [amdgpu] [ +0.000731] amdgpu_device_init.cold+0x108e/0x2002 [amdgpu] [ +0.001071] ? do_pci_enable_device+0xe1/0x110 [ +0.000011] amdgpu_driver_load_kms+0x1a/0x160 [amdgpu] [ +0.000729] amdgpu_pci_probe+0x179/0x3a0 [amdgpu] Signed-off-by: lyndonli <Lyndon.Li@amd.com> Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Fix mode2 reset for sienna cichlidlyndonli
Before this change, sienna_cichlid_get_reset_handler will always return NULL, although the module parameter reset_method is 3 when loading amdgpu driver. Signed-off-by: lyndonli <Lyndon.Li@amd.com> Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add new flag to AMDGPU_CTX_QUERY2Pierre-Eric Pelloux-Prayer
OpenGL EXT_robustness extension expects the driver to stop reporting GUILTY_CONTEXT_RESET when the reset has completed and the GPU is ready to accept submission again. This commit adds a AMDGPU_CTX_QUERY2_FLAGS_RESET_IN_PROGRESS flag, that let the UMD know that the reset is still not finished. Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290 Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: André Almeida <andrealmeid@igalia.com> Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix a test dml32_rq_dlg_get_rq_reg()Christophe JAILLET
It is likely p1_min_meta_chunk_bytes was expected here, instead of min_meta_chunk_bytes. Test the correct variable. Fixes: dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Fix a test CalculatePrefetchSchedule()Christophe JAILLET
It is likely Height was expected here, instead of Width. Test the correct variable. Fixes: 17529ea2acfa ("drm/amd/display: Optimizations for DML math") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm:amd:amdgpu: Fix missing bo unlock in failure pathSukrut Bellary
smatch warning - inconsistent handling of buffer object reserve and unreserve. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: remove unused variables dispclk_delay_subtotal and doutTom Rix
clang with W=1 reports drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:1003:15: error: variable 'dispclk_delay_subtotal' set but not used [-Werror,-Wunused-but-set-variable] unsigned int dispclk_delay_subtotal; ^ This variable is not used, so remove it. Which made dout unused, so also remove. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09Merge tag 'drm-intel-gt-next-2023-06-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake. Driver Changes: Fixes/improvements/new stuff: - Use large rings for compute contexts (Chris Wilson) - Better logging/debug of unexpected GuC communication issues (Michal Wajdeczko) - Clear out entire reports after reading if not power of 2 size (Ashutosh Dixit) - Limit lmem allocation size to succeed on SmallBars (Andrzej Hajda) - perf/OA capture robustness improvements on DG2 (Umesh Nerlige Ramappa) - Fix error code in intel_gsc_uc_heci_cmd_submit_nonpriv() (Dan Carpenter) Future platform enablement: - Add workaround 14016712196 (Tejas Upadhyay) - HuC loading for MTL (Daniele Ceraolo Spurio) - Allow user to set cache at BO creation (Fei Yang) Miscellaneous: - Use system include style for drm headers (Jani Nikula) - Drop legacy CTB definitions (Michal Wajdeczko) - Turn off the timer to sample frequencies when GT is parked (Ashutosh Dixit) - Make PMU sample array two-dimensional (Ashutosh Dixit) - Use the correct error value when kernel_context() fails (Andi Shyti) - Fix second parameter type of pre-gen8 pte_encode callbacks (Nathan Chancellor) - Fix parameter in gmch_ggtt_insert_{entries, page}() (Nathan Chancellor) - Fix size_t format specifier in gsccs_send_message() (Nathan Chancellor) - Use the fdinfo helper (Tvrtko Ursulin) - Add some missing error propagation (Tvrtko Ursulin) - Reduce I915_MAX_GT to 2 (Matt Atwood) - Rename I915_PMU_MAX_GTS to I915_PMU_MAX_GT (Matt Atwood) - Remove some obsolete definitions (John Harrison) Merges: - Merge drm/drm-next into drm-intel-gt-next (Tvrtko Ursulin) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZIH09fqe5v5yArsu@tursulin-desk
2023-06-09Merge tag 'drm-intel-next-2023-06-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 features for v6.5: Features and functionality: - Meteorlake (MTL) display enabling (Mika, Radhakrishna, José, Ankit, Clint, Gustavo, Imre, Anusha, Juha-Pekka, Matt) - Allow VRR to be toggled during fastsets (Ville) - Allow arbitrary refresh rates with VRR eDP panels (Ville) - Support async flips on linear buffers on display ver 12+ (Arun) - New debugfs for display clock frequencies (Bhanuprakash) - Taint kernel when force probing unsupported devices (Jani) - Expose CRTC CTM property on ILK/SNB/VLV (Ville) DRM subsystem changes: - EDID changes to support further conversion to struct drm_edid (Jani) - Move i915 DSC parameter code to common DRM helpers (Dmitry Baryshkov) Refactoring and cleanups: - CSC color refactoring (Ville) - VRR cleanups (Ville) - Finish i915 conversion to struct drm_edid (Jani) - Start high level display driver file (Jani) - Hotplug refactoring (Ville) - Misc display refactoring and cleanups (Jani, Ville) - Use device based logging for state checker warnings (Jani) - Split out hotplug and display irq handling (Jani) - Move display device info and probe under display/ (Matt) - HDCP cleanups (Suraj) - Use localized warning ignores instead of per file (Jani) - Remove superfluous enum i915_drm_suspend_mode (Maarten) - PSR, pfit, scaler and chicken register definition cleanups (Ville) - Constify pointers to hwmon_channel_info (Krzysztof Kozlowski) - Replace all non-returning strlcpy with strscpy (Azeem Shaikh) - Refactor VBT aux channel and DDC pin mapping (Ville) - Include cleanups (Jani) Fixes: - Fix modeset locking issue in DP MST HDCP (Suraj) - Fix disconnected Type-C/DP-alt disable at probe (Imre) - Fix HDMI PCON DSC usage and color conversions (Ankit) - Fix g4x HDMI infoframe/audio transmission port usage (Ville) - Avoid use-after-free when DP connector init fails (Maarten) - Fix voltage level for 480 MHz CDCLK (Chaitanya) - Check HPD live state during eDP probe (Ville) - Fix active port PLL selection for secondary MST streams (Imre) - Check pipe source size when using SKL+ scalers (Ville) - Fix MIPI DSI sleep sequences (Hans de Goede) - Fix DPCD register write order to match 128b/132b requirement (Arun) - Increase AUX timeout for Type-C (Suraj) - Communicate display power demands to pcode (Stan) - Fix potential division by zero in DSC compute config (Nikita Zhandarovich) - Fix fast wake AUX sync length (Jouni) - Fix potential oops on intel_get_crtc_new_encoder() (Ville) Merges: - drm-next backmerges (Rodrigo, Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87zg5eat32.fsf@intel.com
2023-06-09Merge tag 'drm-misc-next-2023-06-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.5: UAPI Changes: Cross-subsystem Changes: Core Changes: Driver Changes: * bridge * imx: Fix module linking * tc358762: Support reset GPIO * meson * Add support for MIPI DSI displays; plus fixes and DT bindings * panel * Add Support for Rocktech RK043FN48H; plus DT bindings * Add support for Starry himax83102-j02; plus DT bindings * Add support for Starry ili9882t; plus DT bindings * virtio * Support sync-object UAPI Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230607085644.GA12673@linux-uq9g
2023-06-09Merge tag 'drm-habanalabs-next-2023-06-08' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next This tag contains additional habanalabs driver changes for v6.5: - uAPI changes: - Return 0 when user queries if there was a h/w or f/w error and no such error happened. Previously we returned an error in such case. - New features and improvements: - Add pci health check when we lose connection with the firmware. This can be used to distinguish between pci link down and firmware getting stuck. - Add more info to the error print when TPC interrupt occur. - Reduce amount of code under mutex in the command submission of signal event. - Firmware related fixes: - Fixes to the handshake protocol during f/w initialization. - Display information that the f/w sends us when encountering a DMA error. - Do soft-reset using a message sent to firmware instead of writing to MMIO. - Prepare generic code to extract f/w version numbers. - Bug fixes and code cleanups. Notable fixes are: - Unsecure certain TPC registers that the user should access. - Fix handling of QMAN errors - Fix memory leak when recording errors (to later pass them to the user) - Multiple fixes to razwi interrupt handling code Signed-off-by: Dave Airlie <airlied@redhat.com> From: Oded Gabbay <ogabbay@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230608103043.GA2699019@ogabbay-vm-u20.habana-labs.com
2023-06-09Merge tag 'drm-next-20230529' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux into drm-next Renesas DRM/KMS drivers: - Group drivers in renesas subdirectory to prepare for new platform - Drop deprecated R-Car H3 ES1.x support Signed-off-by: Dave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230602111504.GA24855@pendragon.ideasonboard.com
2023-06-08accel/habanalabs: refactor error info resetDani Liberman
Moved error info reset code to single function for future use from other places in the driver. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: add event queue extra validationOfir Bitton
In order to increase reliability of the event queue interface, we apply to Gaudi2 the same mechanism we have in Gaudi1. The extra validation is basically checking that the received event index matches the expected index. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: unsecure TSB_CFG_MTRR regsOfir Bitton
In order to utilize Engine Barrier padding, user must have access to this register set. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: move ioctl error print to debug levelOded Gabbay
We don't want to allow users to spam the kernel log and sending ioctls with bad opcodes is a sure way to do it. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-06-08accel/habanalabs: fix bug of not fetching addr_dec infoOfir Bitton
addr_dec info should always be fetched, regardless of cause value. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: add description to several info ioctlsDani Liberman
Several info ioctls may return success although no data retrieved. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: remove sim codeOded Gabbay
There were a few places where simulator only code got into the upstream. Remove those places that can confuse other developers. Fixes: 2a0a839b6a28 ("habanalabs: extend fatal messages to contain PCI info") Cc: Moti Haimovski <mhaimovski@habana.ai> Cc: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: mask part of hmmu page fault captured addressDani Liberman
When receiving page fault from hmmu, the captured address is scrambled both by HW and by driver. The driver part is unscrambled but the HW part isn't getting unscrambled. To avoid declaring wrong address, the HW scrambled part will be masked. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: update state when loading boot fitKoby Elbaz
Any FW component we load must be followed by a corresponding state update. However, it seems that so far we skipped doing so for the bootfit case, so fix that. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: print qman data on error only for lower qmanTomer Tayar
By default, the upper QMANs are not used, and instead engines ARCs access the lower QMANs directly. Errors for upper QMANs are therefore not expected, and the debug print of the PQ entries is not needed. Modify the QMAN debug data print on errors to include only information for the lower QMAN. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: use lower QM in QM errors handlingTomer Tayar
The QMAN GLBL_ERR_STS_4 register has indications for errors also in the lower CQ and the ARC CQ, and not just for errors in the lower CP. Modify the relevant define/struct and the related print to use "lower QM" instead of "lower CP". Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: use binning info when handling razwiDani Liberman
When receiving sei interrupt from tpc or decoder, we need to check the binning mask because if the engine is binned, the razwi info won't be in the router of the binned engine, instead will be in the router of the substitute engine. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: remove support for mmu disableOfir Bitton
As mmu disable mode is only used for bring-up stages, let's remove this option and all code related to it. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: upon DMA errors, use FW-extracted error causeKoby Elbaz
Initially, the driver used to read the error cause data directly from the ASIC. However, the FW now clears it before the driver could read it. Therefore we should use the error cause data that is extracted by the FW. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: print max timeout value on CS stuckOded Gabbay
If a workload got stuck, we print an error to the kernel log about it. Add to that print the configured max timeout value, as that value is not fixed between ASICs and in addition it can be configured using a kernel module parameter. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-06-08accel/habanalabs: align to latest firmware specsOded Gabbay
Update the firmware common interface files with the latest version. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-06-08accel/habanalabs: fix mem leak in capture user mappingsMoti Haimovski
This commit fixes a memory leak caused when clearing the user_mappings info when a new context is opened immediately after user_mapping is captured and a hard reset is performed. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: set unused bit as reservedOded Gabbay
Get latest f/w gaudi2 interface file which marks unused bist_need_iatu_config bit in cold_rst_data structure as reserved bit. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-06-08accel/habanalabs: rename security functions related argumentsKoby Elbaz
Make the argument names specify the registers array represent registers that should be unsecured so the user can access them. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: fix gaudi2_get_tpc_idle_status() returnDan Carpenter
The gaudi2_get_tpc_idle_status() function returned the incorrect variable so it always returned true. Fixes: d85f0531b928 ("accel/habanalabs: break is_idle function into per-engine sub-routines") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: Fix some kernel-doc commentsYang Li
Make the description of @regs_range_array and @regs_range_array_size to @user_regs_range_array and @user_regs_range_array_size to silence the warnings: drivers/accel/habanalabs/common/security.c:506: warning: Function parameter or member 'user_regs_range_array' not described in 'hl_init_pb_ranges_single_dcore' drivers/accel/habanalabs/common/security.c:506: warning: Function parameter or member 'user_regs_range_array_size' not described in 'hl_init_pb_ranges_single_dcore' drivers/accel/habanalabs/common/security.c:506: warning: Excess function parameter 'regs_range_array' description in 'hl_init_pb_ranges_single_dcore' drivers/accel/habanalabs/common/security.c:506: warning: Excess function parameter 'regs_range_array_size' description in 'hl_init_pb_ranges_single_dcore' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=4940 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: always fetch pci addr_dec error infoOfir Bitton
Due to missing indication of address decode source (LBW/HBW bus), we should always try and fetch extended information. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: fix a static warning - 'dubious: x & !y'Koby Elbaz
Use a straight forward approach to get a conditional result. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: poll for device status update following WFE cmdKoby Elbaz
Currently, we rely on COMMS protocol's ack to verify that WFE command has been acknowledged by the FW. However, this does not guarantee that the device status has been updated. Although unlikely, this could trigger a race since the driver expects the device to be halted at that stage, but it might not be. Therefore, we increase WFE's robustness by polling on the status register that will be updated once the device is actually halted. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: expose debugfs files laterTomer Tayar
Currently the debugfs root folder and files for a device are created at an early step, before the device initialization and before the char device and sysfs files are exposed to user. As there is no real reason not to do it together with the device creation, postpone it to be done right afterwards. The initialization of the debugfs entry structure is left in its current position because it is used before creating the files. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: add pci health check during heartbeatOfir Bitton
Currently upon a heartbeat failure, we don't know if the failure is due to firmware hang or due to a bad PCI link. Hence, we are reading a PCI config space register with a known value (vendor ID) so we will know which of the two possibilities caused the heartbeat failure. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: add missing tpc interrupt infoDafna Hirschfeld
For some reason the last possible tpc interrupt cause in gaudi2_tpc_interrupts_cause is missing from the code. Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: refactor abort of completions and waitsKoby Elbaz
Aborting CS completions should be in command_submission.c but aborting waiting for user interrupts should be in device.c. This separation is also for adding more abort operations in the future. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08accel/habanalabs: minimize encapsulation signal mutex lock timeKoby Elbaz
Sync Stream Encapsulated Signal Handlers can be managed from different contexts, and as such they are protected via a spin_lock. However, spin_lock was unnecessarily protecting a larger code section than really needed, covering a sleepable code section as well. Since spin_lock disables preemption, it could lead to sleeping in atomic context. Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-06-08drm/i915/gsc: Fix error code in intel_gsc_uc_heci_cmd_submit_nonpriv()Dan Carpenter
This should return negative -EAGAIN instead of positive EAGAIN. Fixes: e5e1e6d28ebc ("drm/i915/pxp: Add MTL helpers to submit Heci-Cmd-Packet to GSC") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZH7sr+Vs4zOQoouU@moroto
2023-06-07i915/perf: Do not add ggtt offset to hw_tailUmesh Nerlige Ramappa
ggtt offset for hw_tail is not required for the calculations, so drop it. Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230605193923.1836048-3-umesh.nerlige.ramappa@intel.com
2023-06-07i915/perf: Drop the aging_tail logic in perf OAUmesh Nerlige Ramappa
On DG2, capturing OA reports while running heavy render workloads sometimes results in invalid OA reports where 64-byte chunks inside reports have stale values. Under memory pressure, high OA sampling rates (13.3 us) and heavy render workload, occasionally, the OA HW TAIL pointer does not progress as fast as the sampling rate. When these glitches occur, the TAIL pointer takes approx. 200us to progress. While this is expected behavior from the HW perspective, invalid reports are not expected. In oa_buffer_check_unlocked(), when we execute the if condition, we are updating the oa_buffer.tail to the aging tail and then setting pollin based on this tail value, however, we do not have a chance to rewind and validate the reports prior to setting pollin. The validation happens in a subsequent call to oa_buffer_check_unlocked(). If a read occurs before this validation, then we end up reading reports up until this oa_buffer.tail value which includes invalid reports. Though found on DG2, this affects all platforms. The aging tail logic is no longer necessary since we are explicitly checking for landed reports. Start by dropping the aging tail logic. v2: - Drop extra blank line - Add reason to drop aging logic (Ashutosh) - Add bug links (Ashutosh) - rename aged_tail to read_tail - Squash patches 3 and 1 v3: (Ashutosh) - Remove extra spaces - Remove gtt_offset from the pollin calculation - s/Bug:/Link/ in commit message (checkpatch) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7484 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7757 Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230605193923.1836048-2-umesh.nerlige.ramappa@intel.com
2023-06-07drm/i915: Allow user to set cache at BO creationFei Yang
To comply with the design that buffer objects shall have immutable cache setting through out their life cycle, {set, get}_caching ioctl's are no longer supported from MTL onward. With that change caching policy can only be set at object creation time. The current code applies a default (platform dependent) cache setting for all objects. However this is not optimal for performance tuning. The patch extends the existing gem_create uAPI to let user set PAT index for the object at creation time. The new extension is platform independent, so UMD's can switch to using this extension for older platforms as well, while {set, get}_caching are still supported on these legacy paltforms for compatibility reason. However, since PAT index was not clearly defined for platforms prior to GEN12 (TGL), so we are limiting this externsion to GEN12+ platforms only. See ext_set_pat() in for the implementation details. The documentation related to the PAT/MOCS tables is currently available for Tiger Lake here: https://www.intel.com/content/www/us/en/docs/graphics-for-linux/developer-reference/1-0/tiger-lake.html The documentation for other platforms is currently being updated. BSpec: 45101 Mesa support has been submitted in this merge request: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22878 The media driver supprt has bin submitted in this merge request: https://github.com/intel/media-driver/pull/1680 The IGT test related to this change is igt@gem_create@create-ext-set-pat Signed-off-by: Fei Yang <fei.yang@intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Jordan Justen <jordan.l.justen@intel.com> Tested-by: Jordan Justen <jordan.l.justen@intel.com> Acked-by: Carl Zhang <carl.zhang@intel.com> Tested-by: Lihao Gu <lihao.gu@intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Slawomir Milczarek <slawomir.milczarek@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606100042.482345-2-andi.shyti@linux.intel.com
2023-06-07drm/panel: simple: add support for Rocktech RK043FN48H panelDario Binacchi
Add support for Rocktech RK043FN48H 4.3" (480x272) LCD-TFT panel. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306020343.jNTWeM0P-lkp@intel.com/ Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230607063139.621351-6-dario.binacchi@amarulasolutions.com
generated by cgit (git 2.34.1) at 2025-09-15 00:06:54 +0000