| Age | Commit message (Collapse) | Author |
|---|
|
The .s_power() callback is deprecated, and now that we have pm_runtime
functionality in the driver there's no further use for it. Delete the
function.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add pm_runtime support to the ov7251 driver.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
.probe() is quite busy for this driver; make it cleaner by moving the
chip verification to a dedicated function.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The OV7251 sensor is used as the IR camera sensor on the Microsoft
Surface line of tablets; this provides a 19.2MHz external clock, and
the Windows driver for this sensor configures a 319.2MHz link freq to
the CSI-2 receiver. Add the ability to support those rate to the
driver by defining a new set of PLL configs.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Rather than having the pll settings hidden inside mode blobs, define
them in structs and use a dedicated function to set them. This makes
it simpler to extend the driver to support other frequencies for both
the external clock and desired link frequency.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Each of the defined modes in the ov7251 driver uses the same link
frequency and pixel rate; just drop those members of the modes and
set the controls to read only during initialisation. Add a new
table defining the supported pixel rates to substitue for the values
hardcoded in the modes.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Move the endpoint checking from .probe() to a dedicated function,
and additionally check that the firmware provided link frequencies
are a match for those supported by the driver. Store the index to the
matching link frequency so it can be easily identified later.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support for enumeration through ACPI to the ov7251 driver
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
We have platforms where a camera sensor transmits Y10 data to
the CIO2 device - add support for that (packed) format to the
ipu3-cio2 driver.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Some platforms with an Intel IPU3 have an IR sensor producing 10 bit
greyscale format data that is transmitted over a CSI-2 bus to a CIO2
device - this packs the data into 32 bytes per 25 pixels. Add an entry
to the uAPI header defining that format.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
of_match_ptr isn't required as CONFIG_OF is already a dependency in Kconfig
Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This reverts commit 1738890a3165ccd0da98ebd3e2d5f9b230d5afa8.
Commit 1738890a3165 ("clk: sunxi-ng: sun6i-rtc: Add support for H6")
breaks HDMI output on Tanix TX6 mini board. Exact reason isn't known,
but because that commit doesn't actually improve anything, let's just
revert it.
Cc: stable@vger.kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220511200206.2458274-1-jernej.skrabec@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
register_nmi_handler() has no sanity check whether a handler has been
registered already. Such an unintended double-add leads to list corruption
and hard to diagnose problems during the next NMI handling.
Init the list head in the static NMI action struct and check it for being
empty in register_nmi_handler().
[ bp: Fixups. ]
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/lkml/20220511234332.3654455-1-seanjc@google.com
|
|
MWB gain register are used to set gain for each mwb channel mannually.
However, it will involve some artifacts if gain cannot be applied to
each channel synchronously. Enable global gain control to set digital
global gain instead of setting AWB gain separately to fix this issue.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
IS_ERR() and PTR_ERR() use wrong pointer, it should be
sensor->dovdd, fix it.
Fixes: e43ccb0a045f ("media: i2c: Add support for the OV5648 image sensor")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document that drivers must first initialise a media device before
registering it, and clean up once the media device is unregistered.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add CSI-2 data type for 28 bits per pixel data.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add V4L2_ASYNC as a dependency to match other drivers and prevent failures
when compile testing.
Fixes: ff3cc65cadb5 ("media: v4l: async, fwnode: Improve module organisation")
Signed-off-by: Mike Pagano <mpagano@gentoo.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Replace 0x0380 with GENMASK(9, 7) to obtain 0b0000_0011_1000_0000
Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Acc to MLX90640 datasheet:
- 0x0400 represents the start of RAM address
- 0x2400 represents the start of EEPROM address
Reference: https://www.melexis.com/-/media/files/documents\
/datasheets/mlx90640-datasheet-melexis.pdf
Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Currently, the defines in this driver are after some structs and
functions, it makes more sense to move them up to the top of the file,
so that the constants can be named together with other defines.
Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Declare static on function 'fimc_isp_video_device_unregister'.
When VIDEO_EXYNOS4_ISP_DMA_CAPTURE=n, compiler warns about
warning: no previous prototype for function [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kwanghoon Son <k.son@samsung.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
ADV7180 has a built-in mechanism to generate some video patterns,
which is very useful for debug/bring-up activities.
Add support for it.
The test_pattern parameter can be one of the following values:
0: "Single color"
1: "Color bars"
2: "Luma ramp"
3: "Boundary box"
4: "Disable"
Tested on a imx6q board with an ADV7280.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use get_frame_desc() to get the frame desc from the connected source,
and use the provided virtual channel and datatype instead of hardcoded
ones.
get_frame_desc() can contain multiple streams, but as we don't support
multiple streams yet, we will just always use the first stream.
If the source doesn't support get_frame_desc(), fall back to the
previous method of always capturing virtual channel 0 and any datatype.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add CSI-2 bus specific configuration to the frame descriptors. This allows
obtaining the virtual channel and data type information for each stream
the transmitter is sending.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add the media bus type to the frame descriptor. CSI-2 specific
information will be added in next patch to the frame descriptor.
- Make the bus type a named enum
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
No properly bus-type for DPI video bus, add bus-type 7 for it.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As V4L2_FWNODE_BUS_TYPE_PARALLEL is not used for DPI interface, this
patch add V4L2_FWNODE_BUS_TYPE_DPI for video DPI interface.
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In ov7670_probe, it always invokes ov7670_power_off() no matter
the execution is successful or failed. So we cannot invoke it
agiain in ov7670_remove().
Fix this by removing ov7670_power_off from ov7670_remove.
Fixes: 030f9f682e66 ("media: ov7670: control clock along with power")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There is firmware out there that uses "dongwoon,dw9807" compatible string
that never made it to upstream as-is. Add it to the driver to make it load
on such systems.
The chip also has an EEPROM part which is AT24 compatible (for reading
purposes) on a separate I²C address. Adding possible support for this in
the future is not affected by this change.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert the old text based dw9807-vcm chip DT bindings to json-schema.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Depending on the platform we may need to enable and disable three separate
regulators for the imx412.
- DOVDD
Digital I/O power
- AVDD
Analog power
- DVDD
Digital core power
The addition of these regulators shouldn't affect existing users using
fixed-on/firmware-controlled regulators.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The imx412 like many I2C camera sensors has three voltage rails which
depending on platform may be necessary to switch power onto directly.
Add in as optional rails so as not to break anything for existing users.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The enable path does
- gpio
- clock
The disable path does
- gpio
- clock
Fix the order on the power-off path so that power-off and power-on have the
same ordering for clock and gpio.
Fixes: 9214e86c0cc1 ("media: i2c: Add imx412 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The imx412/imx577 sensor has a reset line that is active low not active
high. Currently the logic for this is inverted.
The right way to define the reset line is to declare it active low in the
DTS and invert the logic currently contained in the driver.
The DTS should represent the hardware does i.e. reset is active low.
So:
+ reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
not:
- reset-gpios = <&tlmm 78 GPIO_ACTIVE_HIGH>;
I was a bit reticent about changing this logic since I thought it might
negatively impact @intel.com users. Googling a bit though I believe this
sensor is used on "Keem Bay" which is clearly a DTS based system and is not
upstream yet.
Fixes: 9214e86c0cc1 ("media: i2c: Add imx412 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The commit 09e3b18ca5de ("clk: bcm2835: Remove unused variable")
accidentially breaks the behavior of bcm2835_clock_choose_div() and
booting of Raspberry Pi. The removed do_div macro call had side effects,
so we need to restore it.
Fixes: 09e3b18ca5de ("clk: bcm2835: Remove unused variable")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220428183010.1635248-1-stefan.wahren@i2se.com
Tested-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Fix the following coccicheck warning:
sound/core/seq/seq_ports.c:142:12-14: WARNING opportunity for max()
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220517062518.123292-1-guozhengkui@vivo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Instead of having one big enum add one for each register or field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
drm-next
fix address space collisions in some edge cases when userspace is
using softpin and cleans up the MMU reference handling a bit.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ffae9f7d03ca7a9e00da16d5910ae810befd3c5a.camel@pengutronix.de
|
|
Use kobj_to_dev() instead of open-coding it.
Link: https://lore.kernel.org/r/20220510105113.1351891-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The bsg_setup_queue() function does not return NULL. It returns error
pointers. Fix the check accordingly.
Link: https://lore.kernel.org/r/YnUf7RQl+A3tigWh@kili
Fixes: 4268fa751365 ("scsi: mpi3mr: Add bsg device support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Using get_cpu() leads to disabling preemption and in this context it is not
possible to acquire the following spinlock_t on PREEMPT_RT because it
becomes a sleeping lock.
Commit 0ea5c27583e1 ("[SCSI] bnx2fc: common free list for cleanup
commands") says that it is using get_cpu() as a fix in case the CPU is
preempted. While this might be true, the important part is that it is now
using the same CPU for locking and unlocking while previously it always
relied on smp_processor_id(). The date structure itself is protected with
a lock so it does not rely on CPU-local access.
Replace get_cpu() with raw_smp_processor_id() to obtain the current CPU
number which is used as an index for the per-CPU resource.
Link: https://lore.kernel.org/r/20220506105758.283887-5-bigeasy@linutronix.de
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The get_cpu() in fc_exch_em_alloc() was introduced in commit f018b73af6db
("[SCSI] libfc, libfcoe, fcoe: use smp_processor_id() only when preempt
disabled") for no other reason than to simply use smp_processor_id()
without getting a warning, because everything is done with the pool->lock
held anyway. However, get_cpu(), by disabling preemption, does not play
well with PREEMPT_RT, particularly when acquiring a regular (and thus
sleepable) spinlock.
Therefore remove the get_cpu() and just use the unstable value as we will
have CPU locality guarantees next by taking the lock. The window of
migration, as noted by Sebastian, is small and even if it happens the
result is correct.
Link: https://lore.kernel.org/r/20211117025956.79616-2-dave@stgolabs.net
Link: https://lore.kernel.org/r/20220506105758.283887-4-bigeasy@linutronix.de
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The per-CPU statistics (struct fc_stats) is updated by getting a stable
per-CPU pointer via get_cpu() + per_cpu_ptr() and then performing the
increment. This can be optimized by using this_cpu_*() which will do
whatever is needed on the architecture to perform the update safe and
efficient. The read out of the individual value (fc_get_host_stats())
should be done by using READ_ONCE() instead of a plain-C access. The
difference is that READ_ONCE() will always perform a single access while
the plain-C access can be split by the compiler into two loads if it
appears beneficial. The usage of u64 has the side-effect that it is also
64bit wide on 32bit architectures and the read is always split into two
loads. The can lead to strange values if the read happens during an update
which alters both 32bit parts of the 64bit value. This can be circumvented
by either using a 32bit variables on 32bit architecures or extending the
statistics with a sequence counter.
Use this_cpu_*() API to update the statistics and READ_ONCE() to read it.
Link: https://lore.kernel.org/r/20220506105758.283887-3-bigeasy@linutronix.de
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
fcoe_get_paged_crc_eof() relies on the caller having preemption disabled to
ensure the per-CPU fcoe_percpu context remains valid throughout the
call. This is done by either holding spinlocks (such as bnx2fc_global_lock
or qedf_global_lock) or the get_cpu() from fcoe_alloc_paged_crc_eof(). This
last one breaks PREEMPT_RT semantics as there can be memory allocation and
end up sleeping in atomic contexts.
Introduce a local_lock_t to struct fcoe_percpu that will keep the non-RT
case the same, mapping to preempt_disable/enable, while RT will use a
per-CPU spinlock allowing the region to be preemptible but still maintain
CPU locality. The other users of fcoe_percpu are already safe in this
regard and do not require local_lock()ing.
Link: https://lore.kernel.org/r/20211117025956.79616-3-dave@stgolabs.net
Link: https://lore.kernel.org/r/20220506105758.283887-2-bigeasy@linutronix.de
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Removed unnecessary:
select COMMON_CLK_SP7021
select RESET_SUNPLUS
select NVMEM_SUNPLUS_OCOTP
from Kconfig.
Reported-by: kernel test robot <yujie.liu@intel.com>
Signed-off-by: Wells Lu <wellslutw@gmail.com>
Link: https://lore.kernel.org/r/1652443036-24731-1-git-send-email-wellslutw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cast pointers to unsigned long instead of to uint64_t to avoid this
problem on 32-bit arches:
31 6.89 debian:experimental-x-mips : FAIL gcc version 11.2.0 (Debian 11.2.0-18)
bench/breakpoint.c: In function 'breakpoint_setup':
bench/breakpoint.c:56:24: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
56 | attr.bp_addr = (uint64_t)addr;
| ^
cc1: all warnings being treated as errors
make[3]: *** [/git/perf-5.18.0-rc7/tools/build/Makefile.build:139: bench] Error 2
Fixes: 68a6772f11dbb1ed ("perf bench: Add breakpoint benchmarks")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/YoLq1nHx1doi+VWl@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-05-16
the first 2 patches are by me and target the CAN raw protocol. The 1st
removes an unneeded assignment, the other one adds support for
SO_TXTIME/SCM_TXTIME.
Oliver Hartkopp contributes 2 patches for the ISOTP protocol. The 1st
adds support for transmission without flow control, the other let's
bind() return an error on incorrect CAN ID formatting.
Geert Uytterhoeven contributes a patch to clean up ctucanfd's Kconfig
file.
Vincent Mailhol's patch for the slcan driver uses the proper function
to check for invalid CAN frames in the xmit callback.
The next patch is by Geert Uytterhoeven and makes the interrupt-names
of the renesas,rcar-canfd dt bindings mandatory.
A patch by my update the ctucanfd dt bindings to include the common
CAN controller bindings.
The last patch is by Akira Yokosawa and fixes a breakage the
ctucanfd's documentation.
* tag 'linux-can-next-for-5.19-20220516' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
docs: ctucanfd: Use 'kernel-figure' directive instead of 'figure'
dt-bindings: can: ctucanfd: include common CAN controller bindings
dt-bindings: can: renesas,rcar-canfd: Make interrupt-names required
can: slcan: slc_xmit(): use can_dropped_invalid_skb() instead of manual check
can: ctucanfd: Let users select instead of depend on CAN_CTUCANFD
can: isotp: isotp_bind(): return -EINVAL on incorrect CAN ID formatting
can: isotp: add support for transmission without flow control
can: raw: add support for SO_TXTIME/SCM_TXTIME
can: raw: raw_sendmsg(): remove not needed setting of skb->sk
====================
Link: https://lore.kernel.org/r/20220516202625.1129281-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the %pg format specifier to save on stack consuption and code size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220512062014.1826835-1-hch@lst.de
|
|
The is_kmap_addr() and the is_vmalloc_addr() in the check_heap_object()
will not work, because the virt_addr_valid() will exclude the kmap and
vmalloc regions. So let's move the virt_addr_valid() below
the is_vmalloc_addr().
Signed-off-by: Yuanzheng Song <songyuanzheng@huawei.com>
Fixes: 4e140f59d285 ("mm/usercopy: Check kmap addresses properly")
Fixes: 0aef499f3172 ("mm/usercopy: Detect vmalloc overruns")
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220505071037.4121100-1-songyuanzheng@huawei.com
|
