| Age | Commit message (Collapse) | Author |
|---|
|
DAMON programming interface users can know if specific monitoring ops set
is registered or not using 'damon_is_registered_ops()', but there is no
such method for the user space. To help the case, this commit adds a new
DAMON sysfs file called 'avail_operations' under each context directory
for listing available monitoring ops. Reading the file will list each
registered monitoring ops on each line.
Link: https://lkml.kernel.org/r/20220426203843.45238-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: allow users know which monitoring ops are available".
DAMON users can configure it for vaious address spaces including virtual
address spaces and the physical address space by setting its monitoring
operations set with appropriate one for their purpose. However, there is
no celan and simple way to know exactly which monitoring operations sets
are available on the currently running kernel.
This patchset adds functions for the purpose on DAMON's kernel API
('damon_is_registered_ops()') and sysfs interface ('avail_operations' file
under each context directory).
This patch (of 4):
To know if a specific 'damon_operations' is registered, users need to
check the kernel config or try 'damon_select_ops()' with the ops of the
question, and then see if it successes. In the latter case, the user
should also revert the change. To make the process simple and convenient,
this commit adds a function for checking if a specific 'damon_operations'
is registered or not.
Link: https://lkml.kernel.org/r/20220426203843.45238-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220426203843.45238-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add VM_BUG_ON() bounds checking to make sure that, if "offset + len>
PAGE_SIZE", memset() does not corrupt data in adjacent pages.
Mainly to match all the similar functions in highmem.h.
Link: https://lkml.kernel.org/r/20220426193020.8710-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Out-of-bounds accesses that aren't caught by a guard page will result in
corruption of canary memory. In pathological cases, where an object has
certain alignment requirements, an out-of-bounds access might never be
caught by the guard page. Such corruptions, however, are only detected on
kfree() normally. If the bug causes the kernel to panic before kfree(),
KFENCE has no opportunity to report the issue. Such corruptions may also
indicate failing memory or other faults.
To provide some more information in such cases, add the option to check
canary bytes on panic. This might help narrow the search for the panic
cause; but, due to only having the allocation stack trace, such reports
are difficult to use to diagnose an issue alone. In most cases, such
reports are inactionable, and is therefore an opt-in feature (disabled by
default).
[akpm@linux-foundation.org: add __read_mostly, per Marco]
Link: https://lkml.kernel.org/r/20220425022456.44300-1-huangshaobo6@huawei.com
Signed-off-by: huangshaobo <huangshaobo6@huawei.com>
Suggested-by: chenzefeng <chenzefeng2@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Wangbing <wangbing6@huawei.com>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit db71ef79b59b ("hugetlb: make free_huge_page irq safe"), the
subpool lock should be locked with spin_lock_irq() and all call sites was
modified as such, except for the ones in hugetlbfs_statfs().
Link: https://lkml.kernel.org/r/20220429202207.3045-1-almasrymina@google.com
Fixes: db71ef79b59b ("hugetlb: make free_huge_page irq safe")
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Calls to change_protection_range() on THP can trigger, at least on x86,
two TLB flushes for one page: one immediately, when pmdp_invalidate() is
called by change_huge_pmd(), and then another one later (that can be
batched) when change_protection_range() finishes.
The first TLB flush is only necessary to prevent the dirty bit (and with a
lesser importance the access bit) from changing while the PTE is modified.
However, this is not necessary as the x86 CPUs set the dirty-bit
atomically with an additional check that the PTE is (still) present. One
caveat is Intel's Knights Landing that has a bug and does not do so.
Leverage this behavior to eliminate the unnecessary TLB flush in
change_huge_pmd(). Introduce a new arch specific pmdp_invalidate_ad()
that only invalidates the access and dirty bit from further changes.
Link: https://lkml.kernel.org/r/20220401180821.1986781-4-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, using mprotect() to unprotect a memory region or uffd to
unprotect a memory region causes a TLB flush. However, in such cases the
PTE is often not modified (i.e., remain RO) and therefore not TLB flush is
needed.
Add an arch-specific pte_needs_flush() which tells whether a TLB flush is
needed based on the old PTE and the new one. Implement an x86
pte_needs_flush().
Always flush the TLB when it is architecturally needed even when skipping
a TLB flush might only result in a spurious page-faults by skipping the
flush.
Even with such conservative manner, we can in the future further refine
the checks to test whether a PTE is present by only considering the
architectural _PAGE_PRESENT flag instead of {pte|pmd}_preesnt(). For not
be careful and use the latter.
Link: https://lkml.kernel.org/r/20220401180821.1986781-3-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus
Pull interconnect fixes from Georgi:
"interconnect fixes for v5.18-rc
This contains an additional fix for sc7180 and sdx55 platforms that helps
them to enter suspend even on devices that don't have the most recent DT
changes.
- interconnect: Restore sync state by ignoring ipa-virt in provider count
Signed-off-by: Georgi Djakov <djakov@kernel.org>"
* tag 'icc-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Restore sync state by ignoring ipa-virt in provider count
|
|
machines__find_host() does not exist. Remove declaration.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220513084459.6581-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add 2 benchmarks:
1. Performance of thread creation/exiting in presence of breakpoints.
2. Performance of breakpoint modification in presence of threads.
The benchmarks capture use cases that we are interested in:
using inheritable breakpoints in large highly-threaded applications.
The benchmarks show significant slowdown imposed by breakpoints
(even when they don't fire).
Testing on Intel 8173M with 112 HW threads show:
perf bench --repeat=56 breakpoint thread --breakpoints=0 --parallelism=56 --threads=20
78.675000 usecs/op
perf bench --repeat=56 breakpoint thread --breakpoints=4 --parallelism=56 --threads=20
12967.135714 usecs/op
That's 165x slowdown due to presence of the breakpoints.
perf bench --repeat=20000 breakpoint enable --passive=0 --active=0
1.433250 usecs/op
perf bench --repeat=20000 breakpoint enable --passive=224 --active=0
585.318400 usecs/op
perf bench --repeat=20000 breakpoint enable --passive=0 --active=111
635.953000 usecs/op
That's 408x and 444x slowdown due to presence of threads.
Profiles show some overhead in toggle_bp_slot,
but also very high contention:
90.83% breakpoint-thre [kernel.kallsyms] [k] osq_lock
4.69% breakpoint-thre [kernel.kallsyms] [k] mutex_spin_on_owner
2.06% breakpoint-thre [kernel.kallsyms] [k] __reserve_bp_slot
2.04% breakpoint-thre [kernel.kallsyms] [k] toggle_bp_slot
79.01% breakpoint-enab [kernel.kallsyms] [k] smp_call_function_single
9.94% breakpoint-enab [kernel.kallsyms] [k] llist_add_batch
5.70% breakpoint-enab [kernel.kallsyms] [k] _raw_spin_lock_irq
1.84% breakpoint-enab [kernel.kallsyms] [k] event_function_call
1.12% breakpoint-enab [kernel.kallsyms] [k] send_call_function_single_ipi
0.37% breakpoint-enab [kernel.kallsyms] [k] generic_exec_single
0.24% breakpoint-enab [kernel.kallsyms] [k] __perf_event_disable
0.20% breakpoint-enab [kernel.kallsyms] [k] _perf_event_enable
0.18% breakpoint-enab [kernel.kallsyms] [k] toggle_bp_slot
Committer notes:
Fixup struct init for older compilers:
3 32.90 alpine:3.5 : FAIL clang version 3.8.1 (tags/RELEASE_381/final)
bench/breakpoint.c:49:34: error: missing field 'size' initializer [-Werror,-Wmissing-field-initializers]
struct perf_event_attr attr = {0};
^
1 error generated.
7 37.31 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0)
bench/breakpoint.c:49:34: error: missing field 'size' initializer [-Werror,-Wmissing-field-initializers]
struct perf_event_attr attr = {0};
^
1 error generated.
Signed-off-by: Dmitriy Vyukov <dvyukov@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220505155745.1690906-1-dvyukov@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Enable all the necessary network related nodes, wire the pinctrl
configurations, add the PHYs and connect them to the corresponding
network ports.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-14-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add the switch node and its 8 children ports. All are disabled by default.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-13-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add the SerDes node. On the LAN966x SoC these SerDes are used to connect
network PHYs.
By default, that node is disabled.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-12-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add the switch reset node which will later be used by the switch driver.
The switch reset also resets the GPIO controller and the SGPIO
controller, thus it also has to be connectected to these nodes. This way
the reset will only issued once for the first device requesting the
reset.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-11-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add the MDIO controller nodes. The integrated PHYs are connected to the
second controller. This controller also takes care of the resets of the
integrated PHYs, thus it has two memory regions. The first controller
is routed to the external MDIO/MDC pins.
By default, they are disabled.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-10-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add the monitoring node which covers the temperature sensor as well as
the PWM controller and the FAN tacho input.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-9-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add basic support for the Kontron KSwitch D10 MMT. It comes in two
variants: "6G-2GS" which features 6 Gigabit copper ports and two SFP
cages and "8G" which features 6 Gigbabit copper ports (where two are
2.5G capable).
For now the following is supported and working:
- Kernel console
- SFP cages
- SPI
- SGPIO
- Watchdog
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
[claudiu.beznea: fixed conflict on Makefile]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-8-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add all I2C nodes of the flexcom IP blocks. The driver supports
FIFO, DMA or both combined. But the latter isn't working correctly.
Thus, skip the fifo-size property for now. DMA is doing single byte
reads in this case.
Keep the nodes disabled by default.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-7-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add all the SPI nodes for the flexcom IP block. Keep them
disabled by default.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-6-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add all the remaining usart nodes for the flexcom block. Although the
DMA channels are specified, DMA is not enabled by default because break
detection doesn't work with DMA.
Keep the nodes disabled by default.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-5-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
The usart node of the flexcom3 block is missing the DMA channels. Add
it.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-4-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add the device tree node for the SGPIO IP block reused from the
SparX-5. Keep the node disabled by default.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-3-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
The YAML binding (crypto/atmel,at91sam9g46-aes.yaml) mandates the order
of the channels. Swap them to pass devicetree validation.
Fixes: 290deaa10c50 ("ARM: dts: add DT for lan966 SoC and 2-port board pcb8291")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220502224127.2604333-2-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
The pinctrl device tree binding will be converted to YAML format. Rename
the pin nodes so they end with "-pins" to match the schema.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220420194230.3415663-1-michael@walle.cc
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
interrupt-parent is not to be used as a boolean property.
It is already present in the DT in the proper way it's supposed to be used:
interrupt-parent = <&gic>;
This is also reported by dtbs_check:
arch/arm/boot/dts/at91-sama7g5ek.dtb: interrupt-controller@e8c11000: interrupt-parent: True is not of type 'array'
From schema: /.local/lib/python3.8/site-packages/dtschema/schemas/interrupts.yaml
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220503133127.64320-1-eugen.hristev@microchip.com
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
The node names should be generic, so use "flash" for dataflash nodes and
for cfi-flash.
Suggested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220412105013.249793-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Convert a bunch of selftests to using newly added high-level BPF map
APIs.
This change exposed that map_kptr selftests allocated too big buffer,
which is fixed in this patch as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220512220713.2617964-2-andrii@kernel.org
|
|
Add high-level API wrappers for most common and typical BPF map
operations that works directly on instances of struct bpf_map * (so
you don't have to call bpf_map__fd()) and validate key/value size
expectations.
These helpers require users to specify key (and value, where
appropriate) sizes when performing lookup/update/delete/etc. This forces
user to actually think and validate (for themselves) those. This is
a good thing as user is expected by kernel to implicitly provide correct
key/value buffer sizes and kernel will just read/write necessary amount
of data. If it so happens that user doesn't set up buffers correctly
(which bit people for per-CPU maps especially) kernel either randomly
overwrites stack data or return -EFAULT, depending on user's luck and
circumstances. These high-level APIs are meant to prevent such
unpleasant and hard to debug bugs.
This patch also adds bpf_map_delete_elem_flags() low-level API and
requires passing flags to bpf_map__delete_elem() API for consistency
across all similar APIs, even though currently kernel doesn't expect
any extra flags for BPF_MAP_DELETE_ELEM operation.
List of map operations that get these high-level APIs:
- bpf_map_lookup_elem;
- bpf_map_update_elem;
- bpf_map_delete_elem;
- bpf_map_lookup_and_delete_elem;
- bpf_map_get_next_key.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220512220713.2617964-1-andrii@kernel.org
|
|
Check that ld_imm64 with src_reg=1 (aka BPF_PSEUDO_FUNC) works
with jit_blinding.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220513011025.13344-2-alexei.starovoitov@gmail.com
|
|
The combination of jit blinding and pointers to bpf subprogs causes:
[ 36.989548] BUG: unable to handle page fault for address: 0000000100000001
[ 36.990342] #PF: supervisor instruction fetch in kernel mode
[ 36.990968] #PF: error_code(0x0010) - not-present page
[ 36.994859] RIP: 0010:0x100000001
[ 36.995209] Code: Unable to access opcode bytes at RIP 0xffffffd7.
[ 37.004091] Call Trace:
[ 37.004351] <TASK>
[ 37.004576] ? bpf_loop+0x4d/0x70
[ 37.004932] ? bpf_prog_3899083f75e4c5de_F+0xe3/0x13b
The jit blinding logic didn't recognize that ld_imm64 with an address
of bpf subprogram is a special instruction and proceeded to randomize it.
By itself it wouldn't have been an issue, but jit_subprogs() logic
relies on two step process to JIT all subprogs and then JIT them
again when addresses of all subprogs are known.
Blinding process in the first JIT phase caused second JIT to miss
adjustment of special ld_imm64.
Fix this issue by ignoring special ld_imm64 instructions that don't have
user controlled constants and shouldn't be blinded.
Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220513011025.13344-1-alexei.starovoitov@gmail.com
|
|
For long term references, frame_num is set to long_term_frame_idx which
does not require wrapping. This is fixed by observation, no directly
related issue have been found yet.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
If the timestamp of the src buffer differs from the timestamp of a held
dst buffer, the held buffer is implicitly removed and marked as done.
Add a trace to help debugging if someone hits that case.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
These two fields need documentation as they have dual meaning. It is also
confusing since pic_num is a derived value from frame_num, so this should
help application developers. If we ever need to make a V2 of this API, I
would suggest to remove pic_num entirely.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add h264 decode driver to support mt8186. For the architecture
is single core, need to add new interface to decode.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Adds MT8186's compatible "mediatek,mt8186-vcodec-dec".
Adds MT8186's device private data mtk_vdec_single_core_pdata.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Adds decoder dt-bindings for mt8186.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
If the driver support subdev mode, the parameter "dev->pm.dev" will be
NULL in mtk_vcodec_dec_remove. Kernel will crash when try to rmmod
mtk-vcodec-dec.ko.
[ 4380.702726] pc : do_raw_spin_trylock+0x4/0x80
[ 4380.707075] lr : _raw_spin_lock_irq+0x90/0x14c
[ 4380.711509] sp : ffff80000819bc10
[ 4380.714811] x29: ffff80000819bc10 x28: ffff3600c03e4000 x27: 0000000000000000
[ 4380.721934] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 4380.729057] x23: ffff3600c0f34930 x22: ffffd5e923549000 x21: 0000000000000220
[ 4380.736179] x20: 0000000000000208 x19: ffffd5e9213e8ebc x18: 0000000000000020
[ 4380.743298] x17: 0000002000000000 x16: ffffd5e9213e8e90 x15: 696c346f65646976
[ 4380.750420] x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040
[ 4380.757542] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[ 4380.764664] x8 : 0000000000000000 x7 : ffff3600c7273ae8 x6 : ffffd5e9213e8ebc
[ 4380.771786] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
[ 4380.778908] x2 : 0000000000000000 x1 : ffff3600c03e4000 x0 : 0000000000000208
[ 4380.786031] Call trace:
[ 4380.788465] do_raw_spin_trylock+0x4/0x80
[ 4380.792462] __pm_runtime_disable+0x2c/0x1b0
[ 4380.796723] mtk_vcodec_dec_remove+0x5c/0xa0 [mtk_vcodec_dec]
[ 4380.802466] platform_remove+0x2c/0x60
[ 4380.806204] __device_release_driver+0x194/0x250
[ 4380.810810] driver_detach+0xc8/0x15c
[ 4380.814462] bus_remove_driver+0x5c/0xb0
[ 4380.818375] driver_unregister+0x34/0x64
[ 4380.822288] platform_driver_unregister+0x18/0x24
[ 4380.826979] mtk_vcodec_dec_driver_exit+0x1c/0x888 [mtk_vcodec_dec]
[ 4380.833240] __arm64_sys_delete_module+0x190/0x224
[ 4380.838020] invoke_syscall+0x48/0x114
[ 4380.841760] el0_svc_common.constprop.0+0x60/0x11c
[ 4380.846540] do_el0_svc+0x28/0x90
[ 4380.849844] el0_svc+0x4c/0x100
[ 4380.852975] el0t_64_sync_handler+0xec/0xf0
[ 4380.857148] el0t_64_sync+0x190/0x194
[ 4380.860801] Code: 94431515 17ffffca d503201f d503245f (b9400004)
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add support for VP9 decoding using the stateless API,
as supported by MT8192. And the drivers is lat and core architecture.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: George Sun <george.sun@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
If an opcode handler semi-reliably returns -EAGAIN, io_wq_submit_work()
might continue busily hammer the same handler over and over again, which
is not ideal. The -EAGAIN handling in question was put there only for
IOPOLL, so restrict it to IOPOLL mode only where there is no other
recourse than to retry as we cannot wait.
Fixes: def596e9557c9 ("io_uring: support for IO polling")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f168b4f24181942f3614dd8ff648221736f572e6.1652433740.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for VP8 decoding using the stateless API,
as supported by MT8192.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Adds h264 lat and core architecture driver for mt8192,
and the decode mode is frame based for stateless decoder.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The mitigations= cmdline option help text misses the srbds=off option.
Add it.
[ bp: Add a commit message. ]
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220513101637.216487-1-yangx.jy@fujitsu.com
|
|
Mt8192 can use some of common code with mt8183. Moves them to
a new file in order to reuse.
[hverkuil: replaced memcpy_toio by memcpy, was left over from a prev version]
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The capture queue format type may be differ depending on platform: for
stateless decoder drivers, we need to calculate the capture buffer size
according to the capture queue format type in SCP.
As a preparation for introducing drivers for stateless decoding, save the
current capture queue type on a per vcodec context basis.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Need to use default pic info when get pic info fail.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Steve Cho <stevecho@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
For vp8 not support 4K, need to disable it.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Needs to use mediatek compressed mode for mt8192 decoder.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Getting supported output and capture queue format types according
to decoder capability.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Supported output and capture format types for mt8192 are different
with mt8183. Redefine parameters to store them.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
