summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-02ceph: switch to vfs_inode_has_locks() to fix file lock bugXiubo Li
For the POSIX locks they are using the same owner, which is the thread id. And multiple POSIX locks could be merged into single one, so when checking whether the 'file' has locks may fail. For a file where some openers use locking and others don't is a really odd usage pattern though. Locks are like stoplights -- they only work if everyone pays attention to them. Just switch ceph_get_caps() to check whether any locks are set on the inode. If there are POSIX/OFD/FLOCK locks on the file at the time, we should set CHECK_FILELOCK, regardless of what fd was used to set the lock. Fixes: ff5d913dfc71 ("ceph: return -EIO if read/write against filp that lost file locks") Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-01-02mtd: cfi: allow building spi-intel standaloneArnd Bergmann
When MTD or MTD_CFI_GEOMETRY is disabled, the spi-intel driver fails to build, as it includes the shared CFI header: include/linux/mtd/cfi.h:62:2: error: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp] 62 | #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. linux/mtd/spi-nor.h does not actually need to include cfi.h, so remove the inclusion here to fix the warning. This uncovers a missing #include in spi-nor/core.c so add that there to prevent a different build issue. Fixes: e23e5a05d1fd ("mtd: spi-nor: intel-spi: Convert to SPI MEM") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Tokunori Ikegami <ikegami.t@gmail.com> Acked-by: Pratyush Yadav <pratyush@kernel.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20221220141352.1486360-1-arnd@kernel.org
2023-01-02mtd: parsers: scpart: fix __udivdi3 undefined on mipsMikhail Zhilkin
This fixes the following compile error on mips architecture with clang version 16.0.0 reported by the 0-DAY CI Kernel Test Service: ld.lld: error: undefined symbol: __udivdi3 referenced by scpart.c mtd/parsers/scpart.o:(scpart_parse) in archive drivers/built-in.a As a workaround this makes 'offs' a 32-bit type. This is enough, because the mtd containing partition table practically does not exceed 1 MB. We can revert this when the [Link] has been resolved. Link: https://github.com/ClangBuiltLinux/linux/issues/1635 Fixes: 9b78ef0c7997 ("mtd: parsers: add support for Sercomm partitions") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/805fe58e-690f-6a3f-5ebf-2f6f6e6e4599@gmail.com
2023-01-02mtd: parsers: Fix potential memory leak in mtd_parser_tplink_safeloader_parse()Yuan Can
The parts needs to be freed with all its elements, otherwise it will be leaked. Fixes: 00a3588084be ("mtd: parsers: add TP-Link SafeLoader partitions table parser") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20221208113620.78855-1-yuancan@huawei.com
2023-01-02drm/meson: Reduce the FIFO lines held when AFBC is not usedCarlo Caione
Having a bigger number of FIFO lines held after vsync is only useful to SoCs using AFBC to give time to the AFBC decoder to be reset, configured and enabled again. For SoCs not using AFBC this, on the contrary, is causing on some displays issues and a few pixels vertical offset in the displayed image. Conditionally increase the number of lines held after vsync only for SoCs using AFBC, leaving the default value for all the others. Fixes: 24e0d4058eff ("drm/meson: hold 32 lines after vsync to give time for AFBC start") Signed-off-by: Carlo Caione <ccaione@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> [narmstrong: added fixes tag] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221216-afbc_s905x-v1-0-033bebf780d9@baylibre.com
2023-01-01ksmbd: fix infinite loop in ksmbd_conn_handler_loop()Namjae Jeon
If kernel_recvmsg() return -EAGAIN in ksmbd_tcp_readv() and go round again, It will cause infinite loop issue. And all threads from next connections would be doing that. This patch add max retry count(2) to avoid it. kernel_recvmsg() will wait during 7sec timeout and try to retry two time if -EAGAIN is returned. And add flags of kvmalloc to __GFP_NOWARN and __GFP_NORETRY to disconnect immediately without retrying on memory alloation failure. Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18259 Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-01-01ksmbd: check nt_len to be at least CIFS_ENCPWD_SIZE in ↵William Liu
ksmbd_decode_ntlmssp_auth_blob "nt_len - CIFS_ENCPWD_SIZE" is passed directly from ksmbd_decode_ntlmssp_auth_blob to ksmbd_auth_ntlmv2. Malicious requests can set nt_len to less than CIFS_ENCPWD_SIZE, which results in a negative number (or large unsigned value) used for a subsequent memcpy in ksmbd_auth_ntlvm2 and can cause a panic. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Signed-off-by: William Liu <will@willsroot.io> Signed-off-by: Hrvoje Mišetić <misetichrvoje@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-01-01ksmbd: send proper error response in smb2_tree_connect()Marios Makassikis
Currently, smb2_tree_connect doesn't send an error response packet on error. This causes libsmb2 to skip the specific error code and fail with the following: smb2_service failed with : Failed to parse fixed part of command payload. Unexpected size of Error reply. Expected 9, got 8 Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-01-01NFS: Fix up a sparse warningTrond Myklebust
sparse is warning about an incorrect RCU dereference. fs/nfs/dir.c:2965:56: warning: incorrect type in argument 1 (different address spaces) fs/nfs/dir.c:2965:56: expected struct cred const * fs/nfs/dir.c:2965:56: got struct cred const [noderef] __rcu *const cred Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2023-01-01NFS: Judge the file access cache's timestamp in rcu pathChengen Du
If the user's login time is newer than the cache's timestamp, we expect the cache may be stale and need to clear. The stale cache will remain in the list's tail if no other users operate on that inode. Once the user accesses the inode, the stale cache will be returned in rcu path. Signed-off-by: Chengen Du <chengen.du@canonical.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2023-01-01ASoC: qcom: lpass-cpu: Fix fallback SD line index handlingBrian Norris
These indices should reference the ID placed within the dai_driver array, not the indices of the array itself. This fixes commit 4ff028f6c108 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable"), which among others, broke IPQ8064 audio (sound/soc/qcom/lpass-ipq806x.c) because it uses ID 4 but we'd stop initializing the mi2s_playback_sd_mode and mi2s_capture_sd_mode arrays at ID 0. Fixes: 4ff028f6c108 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20221231061545.2110253-1-computersforpeace@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-01Linux 6.2-rc2v6.2-rc2Linus Torvalds
2023-01-01Merge tag 'perf_urgent_for_v6.2_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Pass only an initialized perf event attribute to the LSM hook - Fix a use-after-free on the perf syscall's error path - A potential integer overflow fix in amd_core_pmu_init() - Fix the cgroup events tracking after the context handling rewrite - Return the proper value from the inherit_event() function on error * tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Call LSM hook after copying perf_event_attr perf: Fix use-after-free in error path perf/x86/amd: fix potential integer overflow on shift of a int perf/core: Fix cgroup events tracking perf core: Return error pointer if inherit_event() fails to find pmu_ctx
2023-01-01Merge tag 'x86_urgent_for_v6.2_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Two fixes to correct how kprobes handles INT3 now that they're added by other functionality like the rethunks and not only kgdb - Remove __init section markings of two functions which are referenced by a function in the .text section * tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK x86/calldepth: Fix incorrect init section references
2023-01-01Merge tag 'locking_urgent_for_v6.2_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Prevent the leaking of a debug timer in futex_waitv() - A preempt-RT mutex locking fix, adding the proper acquire semantics * tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error rtmutex: Add acquire semantics for rtmutex lock acquisition slow path
2023-01-01Merge tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Daniel Vetter: "I'm just back from the mountains, and Dave is out at the beach and should be back in a week again. Just i915 fixes and since Rodrigo bothered to make the pull last week I figured I should warm up gpg and forward this in a nice signed tag as a new years present! - i915 fixes for newer platforms - i915 locking rework to not give up in vm eviction fallback path too early" * tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm: drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence drm/i915/uc: Fix two issues with over-size firmware files drm/i915: improve the catch-all evict to handle lock contention drm/i915: Remove __maybe_unused from mtl_info drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
2023-01-01dt-bindings: net: marvell,orion-mdio: Fix examplesMichał Grzelak
As stated in marvell-orion-mdio.txt deleted in commit 0781434af811f ("dt-bindings: net: orion-mdio: Convert to JSON schema") if 'interrupts' property is present, width of 'reg' should be 0x84. Otherwise, width of 'reg' should be 0x4. Fix 'examples:' and add constraints checking whether 'interrupts' property is present and validate it against fixed values in reg. Signed-off-by: Michał Grzelak <mig@semihalf.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01dt-bindings: net: sun8i-emac: Add phy-supply propertySamuel Holland
This property has always been supported by the Linux driver; see commit 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i"). In fact, the original driver submission includes the phy-supply code but no mention of it in the binding, so the omission appears to be accidental. In addition, the property is documented in the binding for the previous hardware generation, allwinner,sun7i-a20-gmac. Document phy-supply in the binding to fix devicetree validation for the 25+ boards that already use this property. Fixes: 0441bde003be ("dt-bindings: net-next: Add DT bindings documentation for Allwinner dwmac-sun8i") Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01net: ipa: use proper endpoint mask for suspendAlex Elder
It is now possible for a system to have more than 32 endpoints. As a result, registers related to endpoint suspend are parameterized, with 32 endpoints represented in one more registers. In ipa_interrupt_suspend_control(), the IPA_SUSPEND_EN register offset is determined properly, but the bit mask used still assumes the number of enpoints won't exceed 32. This is a bug. Fix it. Fixes: f298ba785e2d ("net: ipa: add a parameter to suspend registers") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01Merge branch 'selftests-fix'David S. Miller
Po-Hsu Lin says: ==================== selftests: net: fix for arp_ndisc_evict_nocarrier test This patchset will fix a false-positive issue caused by the command in cleanup_v6() of the arp_ndisc_evict_nocarrier test. Also, it will make the test to return a non-zero value for any failure reported in the test for us to avoid false-negative results. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01selftests: net: return non-zero for failures reported in ↵Po-Hsu Lin
arp_ndisc_evict_nocarrier Return non-zero return value if there is any failure reported in this script during the test. Otherwise it can only reflect the status of the last command. Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier") Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01selftests: net: fix cleanup_v6() for arp_ndisc_evict_nocarrierPo-Hsu Lin
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit with 255 (No such file or directory), even the tests are good: # selftests: net: arp_ndisc_evict_nocarrier.sh # run arp_evict_nocarrier=1 test # RTNETLINK answers: File exists # ok # run arp_evict_nocarrier=0 test # RTNETLINK answers: File exists # ok # run all.arp_evict_nocarrier=0 test # RTNETLINK answers: File exists # ok # run ndisc_evict_nocarrier=1 test # ok # run ndisc_evict_nocarrier=0 test # ok # run all.ndisc_evict_nocarrier=0 test # ok not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255 This is because it's trying to modify the parameter for ipv4 instead. Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect this fact in cleanup_v6(). Fixes: f86ca07eb531 ("selftests: net: add arp_ndisc_evict_nocarrier") Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01net: phy: Update documentation for get_rate_matchingSean Anderson
Now that phylink no longer calls phy_get_rate_matching with PHY_INTERFACE_MODE_NA, phys no longer need to support it. Remove the documentation mandating support. Fixes: 7642cc28fd37 ("net: phylink: fix PHY validation with rate adaption") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01Merge tag 'drm-intel-fixes-2022-12-30' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - fix TLB invalidation for DG2 and newer platforms. (Andrzej) - Remove __maybe_unused from mtl_info (Lucas) - improve the catch-all evict to handle lock contention (Matt Auld) - Fix two issues with over-size (GuC/HuC) firmware files (John) - Fix DSI resume issues on ICL+ (Jani) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com
2023-01-01Merge branch 'dsa-qca8k-fixes'David S. Miller
Christian Marangi says: ==================== net: dsa: qca8k: multiple fix on mdio read/write Due to some problems in reading the Documentation and elaborating it some wrong assumption were done. The error was reported and notice only now due to how things are setup in the code flow. First 2 patch fix mgmt eth where the lenght calculation is very confusing and in step of word size. (the related commit description have an extensive description about how this mess works) Last 3 patch revert the broken mdio cache and apply a correct version that should still save some extra mdio in phy poll secnario. These 5 patch fix each related problem and apply what the Documentation actually say. Changes v2: - Add cover letter - Fix typo in revert patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01net: dsa: qca8k: improve mdio master read/write by using single lo/hiChristian Marangi
Improve mdio master read/write by using singe mii read/write lo/hi. In a read and write we need to poll the mdio master regs in a busy loop to check for a specific bit present in the upper half of the reg. We can ignore the other half since it won't contain useful data. This will save an additional useless read for each read and write operation. In a read operation the returned data is present in the mdio master reg lower half. We can ignore the other half since it won't contain useful data. This will save an additional useless read for each read operation. In a read operation it's needed to just set the hi half of the mdio master reg as the lo half will be replaced by the result. This will save an additional useless write for each read operation. Tested-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01net: dsa: qca8k: introduce single mii read/write lo/hiChristian Marangi
It may be useful to read/write just the lo or hi half of a reg. This is especially useful for phy poll with the use of mdio master. The mdio master reg is composed by the first 16 bit related to setup and the other half with the returned data or data to write. Refactor the mii function to permit single mii read/write of lo or hi half of the reg. Tested-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01Revert "net: dsa: qca8k: cache lo and hi for mdio write"Christian Marangi
This reverts commit 2481d206fae7884cd07014fd1318e63af35e99eb. The Documentation is very confusing about the topic. The cache logic for hi and lo is wrong and actually miss some regs to be actually written. What the Documentation actually intended was that it's possible to skip writing hi OR lo if half of the reg is not needed to be written or read. Revert the change in favor of a better and correct implementation. Reported-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01net: dsa: tag_qca: fix wrong MGMT_DATA2 sizeChristian Marangi
It was discovered that MGMT_DATA2 can contain up to 28 bytes of data instead of the 12 bytes written in the Documentation by accounting the limit of 16 bytes declared in Documentation subtracting the first 4 byte in the packet header. Update the define with the real world value. Tested-by: Ronald Wahl <ronald.wahl@raritan.com> Fixes: c2ee8181fddb ("net: dsa: tag_qca: add define for handling mgmt Ethernet packet") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01net: dsa: qca8k: fix wrong length value for mgmt eth packetChristian Marangi
The assumption that Documentation was right about how this value work was wrong. It was discovered that the length value of the mgmt header is in step of word size. As an example to process 4 byte of data the correct length to set is 2. To process 8 byte 4, 12 byte 6, 16 byte 8... Odd values will always return the next size on the ack packet. (length of 3 (6 byte) will always return 8 bytes of data) This means that a value of 15 (0xf) actually means reading/writing 32 bytes of data instead of 16 bytes. This behaviour is totally absent and not documented in the switch Documentation. In fact from Documentation the max value that mgmt eth can process is 16 byte of data while in reality it can process 32 bytes at once. To handle this we always round up the length after deviding it for word size. We check if the result is odd and we round another time to align to what the switch will provide in the ack packet. The workaround for the length limit of 15 is still needed as the length reg max value is 0xf(15) Reported-by: Ronald Wahl <ronald.wahl@raritan.com> Tested-by: Ronald Wahl <ronald.wahl@raritan.com> Fixes: 90386223f44e ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01RDMA/mlx5: Fix validation of max_rd_atomic caps for DCMaor Gottlieb
Currently, when modifying DC, we validate max_rd_atomic user attribute against the RC cap, validate against DC. RC and DC QP types have different device limitations. This can cause userspace created DC QPs to malfunction. Fixes: c32a4f296e1d ("IB/mlx5: Add support for DC Initiator QP") Link: https://lore.kernel.org/r/0c5aee72cea188c3bb770f4207cce7abc9b6fc74.1672231736.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-01-01RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for deviceShay Drory
Currently, when mlx5_ib_get_hw_stats() is used for device (port_num = 0), there is a special handling in order to use the correct counters, but, port_num is being passed down the stack without any change. Also, some functions assume that port_num >=1. As a result, the following oops can occur. BUG: unable to handle page fault for address: ffff89510294f1a8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP CPU: 8 PID: 1382 Comm: devlink Tainted: G W 6.1.0-rc4_for_upstream_base_2022_11_10_16_12 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock+0xc/0x20 Call Trace: <TASK> mlx5_ib_get_native_port_mdev+0x73/0xe0 [mlx5_ib] do_get_hw_stats.constprop.0+0x109/0x160 [mlx5_ib] mlx5_ib_get_hw_stats+0xad/0x180 [mlx5_ib] ib_setup_device_attrs+0xf0/0x290 [ib_core] ib_register_device+0x3bb/0x510 [ib_core] ? atomic_notifier_chain_register+0x67/0x80 __mlx5_ib_add+0x2b/0x80 [mlx5_ib] mlx5r_probe+0xb8/0x150 [mlx5_ib] ? auxiliary_match_id+0x6a/0x90 auxiliary_bus_probe+0x3c/0x70 ? driver_sysfs_add+0x6b/0x90 really_probe+0xcd/0x380 __driver_probe_device+0x80/0x170 driver_probe_device+0x1e/0x90 __device_attach_driver+0x7d/0x100 ? driver_allows_async_probing+0x60/0x60 ? driver_allows_async_probing+0x60/0x60 bus_for_each_drv+0x7b/0xc0 __device_attach+0xbc/0x200 bus_probe_device+0x87/0xa0 device_add+0x404/0x940 ? dev_set_name+0x53/0x70 __auxiliary_device_add+0x43/0x60 add_adev+0x99/0xe0 [mlx5_core] mlx5_attach_device+0xc8/0x120 [mlx5_core] mlx5_load_one_devl_locked+0xb2/0xe0 [mlx5_core] devlink_reload+0x133/0x250 devlink_nl_cmd_reload+0x480/0x570 ? devlink_nl_pre_doit+0x44/0x2b0 genl_family_rcv_msg_doit.isra.0+0xc2/0x110 genl_rcv_msg+0x180/0x2b0 ? devlink_nl_cmd_region_read_dumpit+0x540/0x540 ? devlink_reload+0x250/0x250 ? devlink_put+0x50/0x50 ? genl_family_rcv_msg_doit.isra.0+0x110/0x110 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1f6/0x2c0 netlink_sendmsg+0x237/0x490 sock_sendmsg+0x33/0x40 __sys_sendto+0x103/0x160 ? handle_mm_fault+0x10e/0x290 ? do_user_addr_fault+0x1c0/0x5f0 __x64_sys_sendto+0x25/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fix it by setting port_num to 1 in order to get device status and remove unused variable. Fixes: aac4492ef23a ("IB/mlx5: Update counter implementation for dual port RoCE") Link: https://lore.kernel.org/r/98b82994c3cd3fa593b8a75ed3f3901e208beb0f.1672231736.git.leonro@nvidia.com Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Patrisious Haddad <phaddad@nvidia.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-12-31Merge tag 'kbuild-fixes-v6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix broken BuildID - Add srcrpm-pkg to the help message - Fix the option order for modpost built with musl libc - Fix the build dependency of rpm-pkg for openSUSE * tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: fixdep: remove unneeded <stdarg.h> inclusion kbuild: sort single-targets alphabetically again kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires kbuild: Fix running modpost with musl libc kbuild: add a missing line for help message .gitignore: ignore *.rpm arch: fix broken BuildID for arm64 and riscv kconfig: Add static text for search information in help menu
2022-12-31Merge tag 'ata-6.2-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fix from Damien Le Moal: "A single fix to address an issue with wake from suspend with PCS adapters, from Adam" * tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: ahci: Fix PCS quirk application for suspend
2022-12-30thermal: int340x: Add missing attribute for data rate baseSrinivas Pandruvada
Commit 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM driver")' added rfi_restriction_data_rate_base string, mmio details and documentation, but missed adding attribute to sysfs. Add missing sysfs attribute. Fixes: 473be51142ad ("thermal: int340x: processor_thermal: Add RFIM driver") Cc: 5.11+ <stable@vger.kernel.org> # v5.11+ Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-12-30Merge tag 'acpi-6.2-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These are new ACPI IRQ override quirks, low-power S0 idle (S0ix) support adjustments and ACPI backlight handling fixes, mostly for platforms using AMD chips. Specifics: - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo 14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik Schumacher). - Adjust ACPI video detection fallback path to prevent non-operational ACPI backlight devices from being created on systems where the native driver does not detect a suitable panel (Mario Limonciello). - Fix Apple GMUX backlight detection (Hans de Goede). - Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865 and stop using AMD-specific low-power S0 idle code path for systems with Rembrandt chips and newer (Mario Limonciello)" * tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+ ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865 ACPI: video: Fix Apple GMUX backlight detection ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks ACPI: resource: do IRQ override on Lenovo 14ALC7 ACPI: resource: do IRQ override on XMG Core 15 ACPI: video: Don't enable fallback path for creating ACPI backlight by default drm/amd/display: Report to ACPI video if no panels were found ACPI: video: Allow GPU drivers to report no panels
2022-12-30Merge tag 'sound-6.2-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few small fixes: - A regression fix for HDMI audio on HD-audio AMD codecs - Fixes for LINE6 MIDI handling - HD-audio quirk for Dell laptops" * tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops ALSA: line6: fix stack overflow in line6_midi_transmit ALSA: line6: correct midi status byte when receiving data from podxt
2022-12-30Merge branch '6.2/mpt-mpi' into 6.2/scsi-fixesMartin K. Petersen
Pull in Broadcom MPI/MPT fixes that conflicted with patch resolution upstream. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-12-30Merge branch '6.2/scsi-queue' into 6.2/scsi-fixesMartin K. Petersen
Pull in remaining patches from the 6.2 queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-12-30Merge branches 'acpi-resource' and 'acpi-video'Rafael J. Wysocki
Merge ACPI resource handling quirks and ACPI backlight handling fixes for 6.2-rc2: - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo 14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik Schumacher). - Adjust ACPI video detection fallback path to prevent non-operational ACPI backlight devices from being created on systems where the native driver does not detect a suitable panel (Mario Limonciello). - Fix Apple GMUX backlight detection (Hans de Goede). * acpi-resource: ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks ACPI: resource: do IRQ override on Lenovo 14ALC7 ACPI: resource: do IRQ override on XMG Core 15 * acpi-video: ACPI: video: Fix Apple GMUX backlight detection ACPI: video: Don't enable fallback path for creating ACPI backlight by default drm/amd/display: Report to ACPI video if no panels were found ACPI: video: Allow GPU drivers to report no panels
2022-12-30gpio: sprd: Make the irqchip immutableCixi Geng
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-12-30gpio: pmic-eic-sprd: Make the irqchip immutableCixi Geng
Remove the irq_chip from pmic_eic structure, use the various calls by defining the statically irq_chip structure. Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-12-30gpio: eic-sprd: Make the irqchip immutableCixi Geng
Remove the irq_chip from pmic_eic structure, use the various calls by defining the statically irq_chip structure. Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-12-30EDAC/device: Fix period calculation in edac_device_reset_delay_period()Eliav Farber
Fix period calculation in case user sets a value of 1000. The input of round_jiffies_relative() should be in jiffies and not in milli-seconds. [ bp: Use the same code pattern as in edac_device_workq_setup() for clarity. ] Fixes: c4cf3b454eca ("EDAC: Rework workqueue handling") Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20221020124458.22153-1-farbere@amazon.com
2022-12-30gpio: pca953x: avoid to use uninitialized value pinctrlHaibo Chen
There is a variable pinctrl declared without initializer. And then has the case (switch operation chose the default case) to directly use this uninitialized value, this is not a safe behavior. So here initialize the pinctrl as 0 to avoid this issue. This is reported by Coverity. Fixes: 13c5d4ce8060 ("gpio: pca953x: Add support for PCAL6534") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-12-30gpiolib: Fix using uninitialized lookup-flags on ACPI platformsHans de Goede
Commit 8eb1f71e7acc ("gpiolib: consolidate GPIO lookups") refactors fwnode_get_named_gpiod() and gpiod_get_index() into a unified gpiod_find_and_request() helper. The old functions both initialized their local lookupflags variable to GPIO_LOOKUP_FLAGS_DEFAULT, but the new code leaves it uninitialized. This is a problem for at least ACPI platforms, where acpi_find_gpio() only does a bunch of *lookupflags |= GPIO_* statements and thus relies on the variable being initialized. The variable not being initialized leads to: 1. Potentially the wrong flags getting used 2. The check for conflicting lookup flags in gpiod_configure_flags(): "multiple pull-up, pull-down or pull-disable enabled, invalid config" sometimes triggering, making the GPIO unavailable Restore the initialization of lookupflags to GPIO_LOOKUP_FLAGS_DEFAULT to fix this. Fixes: 8eb1f71e7acc ("gpiolib: consolidate GPIO lookups") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-12-30crypto: arm64/sm4 - fix possible crash with CFI enabledTianjia Zhang
The SM4 CCM/GCM assembly functions for encryption and decryption is called via indirect function calls. Therefore they need to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause its type hash to be emitted when the kernel is built with CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure (if the compiler didn't happen to optimize out the indirect call). Fixes: 67fa3a7fdf80 ("crypto: arm64/sm4 - add CE implementation for CCM mode") Fixes: ae1b83c7d572 ("crypto: arm64/sm4 - add CE implementation for GCM mode") Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-30crypto: caam - fix CAAM io mem access in blob_genNikolaus Voss
IO memory access has to be done with accessors defined in caam/regs.h as there are little-endian architectures with a big-endian CAAM unit. Fixes: 6a83830f649a ("crypto: caam - warn if blob_gen key is insecure") Signed-off-by: Nikolaus Voss <nikolaus.voss@haag-streit.com> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-12-30drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO indexJani Nikula
Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1, never 0. Fix the sloppiest commit in recent memory. Fixes: 963bbdb32b47 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com (cherry picked from commit a561933c571798868b5fa42198427a7e6df56c09) Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-12-30drm/i915/dsi: add support for ICL+ native MIPI GPIO sequenceJani Nikula
Starting from ICL, the default for MIPI GPIO sequences seems to be using native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse many pins that quite frankly seem scary to poke based on the VBT sequences. We pretty much have to trust that the board is configured such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for anything else. MIPI sequence v4 also adds a flag to fall back to non-native sequences. v5: - Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler() too (Ville) - References instead of Closes issue 6131 because this does not fix everything v4: - Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville) v3: - Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>) v2: - Fix HPD pin output set (impacts GPIOs 0 and 5) - Fix GPIO data output direction set (impacts GPIOs 4 and 9) - Reduce register accesses to single intel_de_rwm() References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com (cherry picked from commit f087cfe6fcff58044f7aa3b284965af47f472fb0) Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
generated by cgit (git 2.34.1) at 2025-09-12 15:44:51 +0000