summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-06drm/msm/dpu: check both DPU and MDSS devices for the IOMMUDmitry Baryshkov
Follow the lead of MDP5 driver and check both DPU and MDSS devices for the IOMMU specifiers. Historically DPU devices had IOMMU specified in the MDSS device tree node, but as some of MDP5 devices are being converted to the supported by the DPU driver, the driver should adapt and check both devices. Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/489696/ Link: https://lore.kernel.org/r/20220616081106.350262-2-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm: Fix %d vs %uRob Clark
In debugging fence rollover, I noticed that GPU state capture and devcore dumps were showing me negative fence numbers. Let's fix that and some related signed vs unsigned confusion. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/489621/ Link: https://lore.kernel.org/r/20220615163532.3013035-1-robdclark@gmail.com
2022-07-06drm/msm/dpu: move struct dpu_hw_blk definition to dpu_hw_utils.hDmitry Baryshkov
There is little point in having a separate header just for a single opaque struct definition. Drop it now and move the struct to the dpu_hw_util.h header. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488016/ Link: https://lore.kernel.org/r/20220601161349.1517667-5-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: merge base_off with blk_off in struct dpu_hw_blk_reg_mapDmitry Baryshkov
There is little point in keeping a separate MDP address and block offset in this struct. Merge them to form a new blk_addr field used for all register access. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488017/ Link: https://lore.kernel.org/r/20220601161349.1517667-4-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: drop length from struct dpu_hw_blk_reg_mapDmitry Baryshkov
We (nearly) do not use the length field from struct dpu_hw_blk_reg_map, so we can drop it safely. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488013/ Link: https://lore.kernel.org/r/20220601161349.1517667-3-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/dpu: drop xin_id from struct dpu_hw_blk_reg_mapDmitry Baryshkov
Drop the unused field xin_id. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/488011/ Link: https://lore.kernel.org/r/20220601161349.1517667-2-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/adreno: Allow larger address space sizeRob Clark
The restriction to 4G was strictly to work around 64b math bug in some versions of SQE firmware. This appears to be fixed in a650+ SQE fw, so allow a larger address space size on these devices. Also, add a modparam override for debugging and igt. v2: Send the right version of the patch (ie. the one that actually compiles) Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/487601/ Link: https://lore.kernel.org/r/20220529180428.2577832-1-robdclark@gmail.com
2022-07-06drm/msm/adreno: Fix up formattingKonrad Dybcio
Leading spaces are not something checkpatch likes, and it says so when they are present. Use tabs consistently to indent function body and unwrap a 83-char-long line, as 100 is cool nowadays. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/487592/ Link: https://lore.kernel.org/r/20220528160353.157870-4-konrad.dybcio@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/a6xx: Add speedbin support for A619 GPUKonrad Dybcio
There are various SKUs of A619, ranging from 565 MHz to 850 MHz, depending on the bin. Add support for distinguishing them, so that proper frequency ranges can be applied, depending on the HW. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/487590/ Link: https://lore.kernel.org/r/20220528160353.157870-3-konrad.dybcio@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/adreno: Add A619 supportKonrad Dybcio
Add support for the Adreno 619 GPU, as found in Snapdragon 690 (SM6350), 480 (SM4350) and 750G (SM7225). Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/487588/ Link: https://lore.kernel.org/r/20220528160353.157870-2-konrad.dybcio@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm/adreno: Remove dead codeKonrad Dybcio
This BUG_ON will never be reached, and there is a comment 20 above explaining why. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/487586/ Link: https://lore.kernel.org/r/20220528160353.157870-1-konrad.dybcio@somainline.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06drm/msm: Avoid unclocked GMU register access in 6xx gpu_busyDouglas Anderson
From testing on sc7180-trogdor devices, reading the GMU registers needs the GMU clocks to be enabled. Those clocks get turned on in a6xx_gmu_resume(). Confusingly enough, that function is called as a result of the runtime_pm of the GPU "struct device", not the GMU "struct device". Unfortunately the current a6xx_gpu_busy() grabs a reference to the GMU's "struct device". The fact that we were grabbing the wrong reference was easily seen to cause crashes that happen if we change the GPU's pm_runtime usage to not use autosuspend. It's also believed to cause some long tail GPU crashes even with autosuspend. We could look at changing it so that we do pm_runtime_get_if_in_use() on the GPU's "struct device", but then we run into a different problem. pm_runtime_get_if_in_use() will return 0 for the GPU's "struct device" the whole time when we're in the "autosuspend delay". That is, when we drop the last reference to the GPU but we're waiting a period before actually suspending then we'll think the GPU is off. One reason that's bad is that if the GPU didn't actually turn off then the cycle counter doesn't lose state and that throws off all of our calculations. Let's change the code to keep track of the suspend state of devfreq. msm_devfreq_suspend() is always called before we actually suspend the GPU and msm_devfreq_resume() after we resume it. This means we can use the suspended state to know if we're powered or not. NOTE: one might wonder when exactly our status function is called when devfreq is supposed to be disabled. The stack crawl I captured was: msm_devfreq_get_dev_status devfreq_simple_ondemand_func devfreq_update_target qos_notifier_call qos_max_notifier_call blocking_notifier_call_chain pm_qos_update_target freq_qos_apply apply_constraint __dev_pm_qos_update_request dev_pm_qos_update_request msm_devfreq_idle_work Fixes: eadf79286a4b ("drm/msm: Check for powered down HW in the devfreq callbacks") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/489124/ Link: https://lore.kernel.org/r/20220610124639.v4.1.Ie846c5352bc307ee4248d7cab998ab3016b85d06@changeid Signed-off-by: Rob Clark <robdclark@chromium.org>
2022-07-06video: of_display_timing.h: include errno.hHsin-Yi Wang
If CONFIG_OF is not enabled, default of_get_display_timing() returns an errno, so include the header. Fixes: 422b67e0b31a ("videomode: provide dummy inline functions for !CONFIG_OF") Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Helge Deller <deller@gmx.de>
2022-07-06drm/bridge: ti-sn65dsi86: Use atomic variants of drm_bridge_funcsSam Ravnborg
Move away from the deprecated enable/disable operations in drm_bridge_funcs and enable atomic use. v3: - Drop use of DRM_BRIDGE_STATE_OPS v2: - fix build (kernel test robot <lkp@intel.com>) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Kieran Bingham <kieran.bingham@ideasonboard.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220703202724.9553-2-sam@ravnborg.org
2022-07-06fbdev: fbmem: Fix logo center image dx issueGuiling Deng
Image.dx gets wrong value because of missing '()'. If xres == logo->width and n == 1, image.dx = -16. Signed-off-by: Guiling Deng <greens9@163.com> Fixes: 3d8b1933eb1c ("fbdev: fbmem: add config option to center the bootup logo") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Helge Deller <deller@gmx.de>
2022-07-06drm/mediatek: dpi: Add dp_intf supportGuillaume Ranquet
Dpintf is the displayport interface hardware unit. This unit is similar to dpi and can reuse most of the code. This patch adds support for mt8195-dpintf to this dpi driver. Main differences are: - 4 pixels for one iteration for dp_intf while dpi is 1 pixel for one iteration. - Input of dp_intf is two pixels per iteration. - Some register contents differ slightly between the two components. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-6-rex-bc.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-07-06drm/mediatek: dpi: Add pixels_per_iter config supportBo-Chen Chen
The quantity of output for one iteration could be different for dpi and dp_intf. For dp_intf, it's 4 pixels for one iteration it's 1 pixel for one iteration for dpi. Therefore, we add a new config "pixels_per_iter" to control quantity of transferred pixels per iteration. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-5-rex-bc.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-07-06drm/mediatek: dpi: Add input_2pixel config supportBo-Chen Chen
The input pixel per iteration could be different, so we add a new config "input_2pixel" to control this. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-4-rex-bc.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-07-06drm/mediatek: dpi: Add config to support direct connection to dpi panelsBo-Chen Chen
MediaTek dpi supports direct connection to dpi panels while dp_intf does not support. Therefore, add a config "support_direct_pin" to control this. Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-3-rex-bc.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-07-06drm/mediatek: dpi: Add YUV422 output supportBo-Chen Chen
Dp_intf supports YUV422 as output format. In MT8195 Chrome project, YUV422 output format is used for 4K resolution. To support this, it is also needed to support color format transfer. Color format transfer is a new feature for both dpi and dpintf of MT8195. The input format could be RGB888 and output format for dp_intf should be YUV422. Therefore, we add a mtk_dpi_matrix_sel() helper to update the DPI_MATRIX_SET register depending on the color format. Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220705102530.1344-2-rex-bc.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-07-06drm/bridge: fsl-ldb: Enable split mode for LVDS dual linkLiu Ying
When LVDS dual link is used, we have to enable the LDB_CTRL_SPLIT_MODE bit. Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-3-victor.liu@nxp.com Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-4-victor.liu@nxp.com
2022-07-06drm/bridge: fsl-ldb: Fix mode clock rate validationLiu Ying
With LVDS dual link, up to 160MHz mode clock rate is supported. With LVDS single link, up to 80MHz mode clock rate is supported. Fix mode clock rate validation by swapping the maximum mode clock rates of the two link modes. Fixes: 463db5c2ed4a ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220701065634.4027537-2-victor.liu@nxp.com
2022-07-06drm: bridge: ldb: Drop DE flip from Freescale i.MX8MP LDB bridgeMarek Vasut
The DE inversion is implemented in LCDIFv3 driver and is no longer needed in the LDB bridge which does not invert the DE signal. Drop the inversion. Fixes: 463db5c2ed4ae ("drm: bridge: ldb: Implement simple Freescale i.MX8MP LDB bridge") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Peng Fan <peng.fan@nxp.com> Cc: Robby Cai <robby.cai@nxp.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> To: dri-devel@lists.freedesktop.org Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220630174031.92354-1-marex@denx.de
2022-07-06drm/bridge: anx7625: Add wait_hpd_asserted() callbackHsin-Yi Wang
Move hpd polling check into wait_hpd_asserted() callback. For the cases that aux transfer function wasn't used, do hpd polling check after pm runtime resume, which will power on the bridge. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220706125254.2474095-5-hsinyi@chromium.org
2022-07-06drm/bridge: anx7625: Fix NULL pointer crash when using edp-panelHsin-Yi Wang
Move devm_of_dp_aux_populate_ep_devices() after pm runtime and i2c setup to avoid NULL pointer crash. edp-panel probe (generic_edp_panel_probe) calls pm_runtime_get_sync() to read EDID. At this time, bridge should have pm runtime enabled and i2c clients ready. Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220706125254.2474095-4-hsinyi@chromium.org
2022-07-06drm/bridge: anx7625: use pm_runtime_force_suspend(resume)Hsin-Yi Wang
There's no need to check for IRQ or disable it in suspend. Use pm_runtime_force_suspend(resume) to make sure anx7625 is powered off correctly. Make the system suspend/resume and pm runtime suspend/resume more consistent. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220706125254.2474095-3-hsinyi@chromium.org
2022-07-06drm/bridge: anx7625: Convert to devm_i2c_new_dummy_device()Hsin-Yi Wang
Simplify the resource management. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Xin Ji <xji@analogixsemi.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220706125254.2474095-2-hsinyi@chromium.org
2022-07-06Revert "tls: rx: move counting TlsDecryptErrors for sync"Gal Pressman
This reverts commit 284b4d93daee56dff3e10029ddf2e03227f50dbf. When using TLS device offload and coming from tls_device_reencrypt() flow, -EBADMSG error in tls_do_decryption() should not be counted towards the TLSTlsDecryptError counter. Move the counter increase back to the decrypt_internal() call site in decrypt_skb_update(). This also fixes an issue where: if (n_sgin < 1) return -EBADMSG; Errors in decrypt_internal() were not counted after the cited patch. Fixes: 284b4d93daee ("tls: rx: move counting TlsDecryptErrors for sync") Cc: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06Merge branch 'mptcp-path-manager-fixes'David S. Miller
Mat Martineau says: ==================== mptcp: Path manager fixes for 5.19 The MPTCP userspace path manager is new in 5.19, and these patches fix some issues in that new code. Patches 1-3 fix path manager locking issues. Patches 4 and 5 allow userspace path managers to change priority of established subflows using the existing MPTCP_PM_CMD_SET_FLAGS generic netlink command. Includes corresponding self test update. Patches 6 and 7 fix accounting of available endpoint IDs and the MPTCP_MIB_RMSUBFLOW counter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: update MIB_RMSUBFLOW in cmd_sf_destroyGeliang Tang
This patch increases MPTCP_MIB_RMSUBFLOW mib counter in userspace pm destroy subflow function mptcp_nl_cmd_sf_destroy() when removing subflow. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: fix local endpoint accountingPaolo Abeni
In mptcp_pm_nl_rm_addr_or_subflow() we always mark as available the id corresponding to the just removed address. The used bitmap actually tracks only the local IDs: we must restrict the operation when a (local) subflow is removed. Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06selftests: mptcp: userspace PM support for MP_PRIO signalsKishen Maloor
This change updates the testing sample (pm_nl_ctl) to exercise the updated MPTCP_PM_CMD_SET_FLAGS command for userspace PMs to issue MP_PRIO signals over the selected subflow. E.g. ./pm_nl_ctl set 10.0.1.2 port 47234 flags backup token 823274047 rip 10.0.1.1 rport 50003 userspace_pm.sh has a new selftest that invokes this command. Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: netlink: issue MP_PRIO signals from userspace PMsKishen Maloor
This change updates MPTCP_PM_CMD_SET_FLAGS to allow userspace PMs to issue MP_PRIO signals over a specific subflow selected by the connection token, local and remote address+port. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/286 Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kishen Maloor <kishen.maloor@intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: Acquire the subflow socket lock before modifying MP_PRIO flagsMat Martineau
When setting up a subflow's flags for sending MP_PRIO MPTCP options, the subflow socket lock was not held while reading and modifying several struct members that are also read and modified in mptcp_write_options(). Acquire the subflow socket lock earlier and send the MP_PRIO ACK with that lock already acquired. Add a new variant of the mptcp_subflow_send_ack() helper to use with the subflow lock held. Fixes: 067065422fcd ("mptcp: add the outgoing MP_PRIO support") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: Avoid acquiring PM lock for subflow priority changesMat Martineau
The in-kernel path manager code for changing subflow flags acquired both the msk socket lock and the PM lock when possibly changing the "backup" and "fullmesh" flags. mptcp_pm_nl_mp_prio_send_ack() does not access anything protected by the PM lock, and it must release and reacquire the PM lock. By pushing the PM lock to where it is needed in mptcp_pm_nl_fullmesh(), the lock is only acquired when the fullmesh flag is changed and the backup flag code no longer has to release and reacquire the PM lock. The change in locking context requires the MIB update to be modified - move that to a better location instead. This change also makes it possible to call mptcp_pm_nl_mp_prio_send_ack() for the userspace PM commands without manipulating the in-kernel PM lock. Fixes: 0f9f696a502e ("mptcp: add set_flags command in PM netlink") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06mptcp: fix locking in mptcp_nl_cmd_sf_destroy()Paolo Abeni
The user-space PM subflow removal path uses a couple of helpers that must be called under the msk socket lock and the current code lacks such requirement. Change the existing lock scope so that the relevant code is under its protection. Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/287 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06Merge branch 'act_police-continue-offload-fix'David S. Miller
Vlad Buslov says: ==================== net: Fix police 'continue' action offload TC act_police with 'continue' action had been supported by mlx5 matchall classifier offload implementation for some time. However, 'continue' was assumed implicitly and recently got broken in multiple places. Fix it in both TC hardware offload validation code and mlx5 driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06net/mlx5e: Fix matchall police parameters validationVlad Buslov
Referenced commit prepared the code for upcoming extension that allows mlx5 to offload police action attached to flower classifier. However, with regard to existing matchall classifier offload validation should be reversed as FLOW_ACTION_CONTINUE is the only supported notexceed police action type. Fix the problem by allowing FLOW_ACTION_CONTINUE for police action and extend scan_tc_matchall_fdb_actions() to only allow such actions with matchall classifier. Fixes: d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Acked-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06net/sched: act_police: allow 'continue' action offloadVlad Buslov
Offloading police with action TC_ACT_UNSPEC was erroneously disabled even though it was supported by mlx5 matchall offload implementation, which didn't verify the action type but instead assumed that any single police action attached to matchall classifier is a 'continue' action. Lack of action type check made it non-obvious what mlx5 matchall implementation actually supports and caused implementers and reviewers of referenced commits to disallow it as a part of improved validation code. Fixes: b8cd5831c61c ("net: flow_offload: add tc police action parameters") Fixes: b50e462bc22d ("net/sched: act_police: Add extack messages for offload failure") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-06iommu/vt-d: Fix RID2PASID setup/teardown failureLu Baolu
The IOMMU driver shares the pasid table for PCI alias devices. When the RID2PASID entry of the shared pasid table has been filled by the first device, the subsequent device will encounter the "DMAR: Setup RID2PASID failed" failure as the pasid entry has already been marked as present. As the result, the IOMMU probing process will be aborted. On the contrary, when any alias device is hot-removed from the system, for example, by writing to /sys/bus/pci/devices/.../remove, the shared RID2PASID will be cleared without any notifications to other devices. As the result, any DMAs from those rest devices are blocked. Sharing pasid table among PCI alias devices could save two memory pages for devices underneath the PCIe-to-PCI bridges. Anyway, considering that those devices are rare on modern platforms that support VT-d in scalable mode and the saved memory is negligible, it's reasonable to remove this part of immature code to make the driver feasible and stable. Fixes: ef848b7e5a6a0 ("iommu/vt-d: Setup pasid entry for RID2PASID support") Reported-by: Chenyi Qiang <chenyi.qiang@intel.com> Reported-by: Ethan Zhao <haifeng.zhao@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Ethan Zhao <haifeng.zhao@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220623065720.727849-1-baolu.lu@linux.intel.com Link: https://lore.kernel.org/r/20220625133430.2200315-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-06iommu/vt-d: Fix PCI bus rescan device hot addYian Chen
Notifier calling chain uses priority to determine the execution order of the notifiers or listeners registered to the chain. PCI bus device hot add utilizes the notification mechanism. The current code sets low priority (INT_MIN) to Intel dmar_pci_bus_notifier and postpones DMAR decoding after adding new device into IOMMU. The result is that struct device pointer cannot be found in DRHD search for the new device's DMAR/IOMMU. Subsequently, the device is put under the "catch-all" IOMMU instead of the correct one. This could cause system hang when device TLB invalidation is sent to the wrong IOMMU. Invalidation timeout error and hard lockup have been observed and data inconsistency/crush may occur as well. This patch fixes the issue by setting a positive priority(1) for dmar_pci_bus_notifier while the priority of IOMMU bus notifier uses the default value(0), therefore DMAR decoding will be in advance of DRHD search for a new device to find the correct IOMMU. Following is a 2-step example that triggers the bug by simulating PCI device hot add behavior in Intel Sapphire Rapids server. echo 1 > /sys/bus/pci/devices/0000:6a:01.0/remove echo 1 > /sys/bus/pci/rescan Fixes: 59ce0515cdaf ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope") Cc: stable@vger.kernel.org # v3.15+ Reported-by: Zhang, Bernice <bernice.zhang@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Yian Chen <yian.chen@intel.com> Link: https://lore.kernel.org/r/20220521002115.1624069-1-yian.chen@intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2022-07-06x86/compressed/64: Add identity mappings for setup_data entriesMichael Roth
The decompressed kernel initially relies on the identity map set up by the boot/compressed kernel for accessing things like boot_params. With the recent introduction of SEV-SNP support, the decompressed kernel also needs to access the setup_data entries pointed to by boot_params->hdr.setup_data. This can lead to a crash in the kexec kernel during early boot due to these entries not currently being included in the initial identity map, see thread at Link below. Include mappings for the setup_data entries in the initial identity map. [ bp: Massage commit message and use a helper var for better readability. ] Fixes: b190a043c49a ("x86/sev: Add SEV-SNP feature detection/setup") Reported-by: Jun'ichi Nomura <junichi.nomura@nec.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/TYCPR01MB694815CD815E98945F63C99183B49@TYCPR01MB6948.jpnprd01.prod.outlook.com
2022-07-06dmaengine: lgm: Fix an error handling path in intel_ldma_probe()Christophe JAILLET
ldma_clk_disable() calls both: clk_disable_unprepare(d->core_clk); reset_control_assert(d->rst); So, should devm_reset_control_get_optional() fail, core_clk should not be prepare_enable'd before it, otherwise it will never be disable_unprepare'd. Reorder the code to handle the error handling path as expected. Fixes: 32d31c79a1a4 ("dmaengine: Add Intel LGM SoC DMA support.") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/18504549bc4d2b62a72a02cb22a2e4d8e6a58720.1653241224.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-06dmaengine: pl330: Fix lockdep warning about non-static keyDmitry Osipenko
The DEFINE_SPINLOCK() macro shouldn't be used for dynamically allocated spinlocks. The lockdep warns about this and disables locking validator. Fix the warning by making lock static. INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Hardware name: Radxa ROCK Pi 4C (DT) Call trace: dump_backtrace.part.0+0xcc/0xe0 show_stack+0x18/0x6c dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 register_lock_class+0x4a8/0x4cc __lock_acquire+0x78/0x20cc lock_acquire.part.0+0xe0/0x230 lock_acquire+0x68/0x84 _raw_spin_lock_irqsave+0x84/0xc4 add_desc+0x44/0xc0 pl330_get_desc+0x15c/0x1d0 pl330_prep_dma_cyclic+0x100/0x270 snd_dmaengine_pcm_trigger+0xec/0x1c0 dmaengine_pcm_trigger+0x18/0x24 ... Fixes: e588710311ee ("dmaengine: pl330: fix descriptor allocation fail") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20220520181432.149904-1-dmitry.osipenko@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-05net: lan966x: hardcode the number of external portsMichael Walle
Instead of counting the child nodes in the device tree, hardcode the number of ports in the driver itself. The counting won't work at all if an ethernet port is marked as disabled, e.g. because it is not connected on the board at all. It turns out that the LAN9662 and LAN9668 use the same switching IP with the same synthesis parameters. The only difference is that the output ports are not connected. Thus, we can just hardcode the number of physical ports to 8. Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220704153654.1167886-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-05Merge tag 'for-net-2022-07-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix deadlock when powering on. * tag 'for-net-2022-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: core: Fix deadlock on hci_power_on_sync. ==================== Link: https://lore.kernel.org/r/20220705202700.1689796-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-05Bluetooth: core: Fix deadlock on hci_power_on_sync.Vasyl Vavrychuk
`cancel_work_sync(&hdev->power_on)` was moved to hci_dev_close_sync in commit [1] to ensure that power_on work is canceled after HCI interface down. But, in certain cases power_on work function may call hci_dev_close_sync itself: hci_power_on -> hci_dev_do_close -> hci_dev_close_sync -> cancel_work_sync(&hdev->power_on), causing deadlock. In particular, this happens when device is rfkilled on boot. To avoid deadlock, move power_on work canceling out of hci_dev_do_close/hci_dev_close_sync. Deadlock introduced by commit [1] was reported in [2,3] as broken suspend. Suspend did not work because `hdev->req_lock` held as result of `power_on` work deadlock. In fact, other BT features were not working. It was not observed when testing [1] since it was verified without rfkill in place. NOTE: It is not needed to cancel power_on work from other places where hci_dev_do_close/hci_dev_close_sync is called in case: * Requests were serialized due to `hdev->req_workqueue`. The power_on work is first in that workqueue. * hci_rfkill_set_block which won't close device anyway until HCI_SETUP is on. * hci_sock_release which runs after hci_sock_bind which ensures HCI_SETUP was cleared. As result, behaviour is the same as in pre-dd06ed7 commit, except power_on work cancel added to hci_dev_close. [1]: commit ff7f2926114d ("Bluetooth: core: Fix missing power_on work cancel on HCI close") [2]: https://lore.kernel.org/lkml/20220614181706.26513-1-max.oss.09@gmail.com/ [2]: https://lore.kernel.org/lkml/1236061d-95dd-c3ad-a38f-2dae7aae51ef@o2.pl/ Fixes: ff7f2926114d ("Bluetooth: core: Fix missing power_on work cancel on HCI close") Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reported-by: Max Krummenacher <max.krummenacher@toradex.com> Reported-by: Mateusz Jonczyk <mat.jonczyk@o2.pl> Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-05drm/amdgpu/display: disable prefer_shadow for generic fb helpersAlex Deucher
Seems to break hibernation. Disable for now until we can root cause it. Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216119 Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amdgpu: keep fbdev buffers pinned during suspendAlex Deucher
Was dropped when we converted to the generic helpers. Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Remove unused variables from vba_vars_stMaíra Canal
Some variables from the struct vba_vars_st are not referenced in any other place on the codebase. As they are not used, this commit removes those variables. Signed-off-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-23 18:28:37 +0000