summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-07-16selftests: packetdrill: correct the expected timing in tcp_rcv_big_endseqJakub Kicinski
Commit f5fda1a86884 ("selftests/net: packetdrill: add tcp_rcv_big_endseq.pkt") added this test recently, but it's failing with: # tcp_rcv_big_endseq.pkt:41: error handling packet: timing error: expected outbound packet at 1.230105 sec but happened at 1.190101 sec; tolerance 0.005046 sec # script packet: 1.230105 . 1:1(0) ack 54001 win 0 # actual packet: 1.190101 . 1:1(0) ack 54001 win 0 It's unclear why the test expects the ack to be delayed. Correct it. Link: https://patch.msgid.link/20250715142849.959444-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-16ethtool: Don't check for RXFH fields conflict when no input_xfrm is requestedGal Pressman
The requirement of ->get_rxfh_fields() in ethtool_set_rxfh() is there to verify that we have no conflict of input_xfrm with the RSS fields options, there is no point in doing it if input_xfrm is not supported/requested. This is under the assumption that a driver that supports input_xfrm will also support ->get_rxfh_fields(), so add a WARN_ON() to ethtool_check_ops() to verify it, and remove the op NULL check. This fixes the following error in mlx4_en, which doesn't support getting/setting RXFH fields. $ ethtool --set-rxfh-indir eth2 hfunc xor Cannot set RX flow hash configuration: Operation not supported Fixes: 72792461c8e8 ("net: ethtool: don't mux RXFH via rxnfc callbacks") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250715140754.489677-1-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-16selftests: rtnetlink: fix addrlft test flakiness on power-saving systemsHangbin Liu
Jakub reported that the rtnetlink test for the preferred lifetime of an address has become quite flaky. The issue started appearing around the 6.16 merge window in May, and the test fails with: FAIL: preferred_lft addresses remaining The flakiness might be related to power-saving behavior, as address expiration is handled by a "power-efficient" workqueue. To address this, use slowwait to check more frequently whether the address still exists. This reduces the likelihood of the system entering a low-power state during the test, improving reliability. Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20250715043459.110523-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-16Merge tag 'probes-fixes-v6.16-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fix from Masami Hiramatsu: - fprobe-event: The @params variable was being used in an error path without being initialized. The fix to return an error code. * tag 'probes-fixes-v6.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/probes: Avoid using params uninitialized in parse_btf_arg()
2025-07-16Bluetooth: btusb: QCA: Fix downloading wrong NVM for WCN6855 GF variant ↵Zijun Hu
without board ID For GF variant of WCN6855 without board ID programmed btusb_generate_qca_nvm_name() will chose wrong NVM 'qca/nvm_usb_00130201.bin' to download. Fix by choosing right NVM 'qca/nvm_usb_00130201_gf.bin'. Also simplify NVM choice logic of btusb_generate_qca_nvm_name(). Fixes: d6cba4e6d0e2 ("Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller") Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-16Bluetooth: hci_dev: replace 'quirks' integer by 'quirk_flags' bitmapChristian Eggers
The 'quirks' member already ran out of bits on some platforms some time ago. Replace the integer member by a bitmap in order to have enough bits in future. Replace raw bit operations by accessor macros. Fixes: ff26b2dd6568 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING") Fixes: 127881334eaa ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE") Suggested-by: Pauli Virtanen <pav@iki.fi> Tested-by: Ivan Pravdin <ipravdin.official@gmail.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-16Bluetooth: hci_core: add missing braces when using macro parametersChristian Eggers
Macro parameters should always be put into braces when accessing it. Fixes: 4fc9857ab8c6 ("Bluetooth: hci_sync: Add check simultaneous roles support") Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-16Bluetooth: hci_core: fix typos in macrosChristian Eggers
The provided macro parameter is named 'dev' (rather than 'hdev', which may be a variable on the stack where the macro is used). Fixes: a9a830a676a9 ("Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE") Fixes: 6126ffabba6b ("Bluetooth: Introduce HCI_CONN_FLAG_DEVICE_PRIVACY device flag") Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-16Bluetooth: SMP: Fix using HCI_ERROR_REMOTE_USER_TERM on timeoutLuiz Augusto von Dentz
This replaces the usage of HCI_ERROR_REMOTE_USER_TERM, which as the name suggest is to indicate a regular disconnection initiated by an user, with HCI_ERROR_AUTH_FAILURE to indicate the session has timeout thus any pairing shall be considered as failed. Fixes: 1e91c29eb60c ("Bluetooth: Use hci_disconnect for immediate disconnection from SMP") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-16Bluetooth: SMP: If an unallowed command is received consider it a failureLuiz Augusto von Dentz
If a command is received while a bonding is ongoing consider it a pairing failure so the session is cleanup properly and the device is disconnected immediately instead of continuing with other commands that may result in the session to get stuck without ever completing such as the case bellow: > ACL Data RX: Handle 2048 flags 0x02 dlen 21 SMP: Identity Information (0x08) len 16 Identity resolving key[16]: d7e08edef97d3e62cd2331f82d8073b0 > ACL Data RX: Handle 2048 flags 0x02 dlen 21 SMP: Signing Information (0x0a) len 16 Signature key[16]: 1716c536f94e843a9aea8b13ffde477d Bluetooth: hci0: unexpected SMP command 0x0a from XX:XX:XX:XX:XX:XX > ACL Data RX: Handle 2048 flags 0x02 dlen 12 SMP: Identity Address Information (0x09) len 7 Address: XX:XX:XX:XX:XX:XX (Intel Corporate) While accourding to core spec 6.1 the expected order is always BD_ADDR first first then CSRK: When using LE legacy pairing, the keys shall be distributed in the following order: LTK by the Peripheral EDIV and Rand by the Peripheral IRK by the Peripheral BD_ADDR by the Peripheral CSRK by the Peripheral LTK by the Central EDIV and Rand by the Central IRK by the Central BD_ADDR by the Central CSRK by the Central When using LE Secure Connections, the keys shall be distributed in the following order: IRK by the Peripheral BD_ADDR by the Peripheral CSRK by the Peripheral IRK by the Central BD_ADDR by the Central CSRK by the Central According to the Core 6.1 for commands used for key distribution "Key Rejected" can be used: '3.6.1. Key distribution and generation A device may reject a distributed key by sending the Pairing Failed command with the reason set to "Key Rejected". Fixes: b28b4943660f ("Bluetooth: Add strict checks for allowed SMP PDUs") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-16Bluetooth: btintel: Check if controller is ISO capable on ↵Luiz Augusto von Dentz
btintel_classify_pkt_type Due to what seem to be a bug with variant version returned by some firmwares the code may set hdev->classify_pkt_type with btintel_classify_pkt_type when in fact the controller doesn't even support ISO channels feature but may use the handle range expected from a controllers that does causing the packets to be reclassified as ISO causing several bugs. To fix the above btintel_classify_pkt_type will attempt to check if the controller really supports ISO channels and in case it doesn't don't reclassify even if the handle range is considered to be ISO, this is considered safer than trying to fix the specific controller/firmware version as that could change over time and causing similar problems in the future. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219553 Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2100565 Link: https://github.com/StarLabsLtd/firmware/issues/180 Fixes: f25b7fd36cc3 ("Bluetooth: Add vendor-specific packet classification for ISO data") Cc: stable@vger.kernel.org Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Sean Rhodes <sean@starlabs.systems>
2025-07-16Bluetooth: hci_sync: fix connectable extended advertising when using static ↵Alessandro Gasbarroni
random address Currently, the connectable flag used by the setup of an extended advertising instance drives whether we require privacy when trying to pass a random address to the advertising parameters (Own Address). If privacy is not required, then it automatically falls back to using the controller's public address. This can cause problems when using controllers that do not have a public address set, but instead use a static random address. e.g. Assume a BLE controller that does not have a public address set. The controller upon powering is set with a random static address by default by the kernel. < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 Address: E4:AF:26:D8:3E:3A (Static) > HCI Event: Command Complete (0x0e) plen 4 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) Setting non-connectable extended advertisement parameters in bluetoothctl mgmt add-ext-adv-params -r 0x801 -x 0x802 -P 2M -g 1 correctly sets Own address type as Random < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 ... Own address type: Random (0x01) Setting connectable extended advertisement parameters in bluetoothctl mgmt add-ext-adv-params -r 0x801 -x 0x802 -P 2M -g -c 1 mistakenly sets Own address type to Public (which causes to use Public Address 00:00:00:00:00:00) < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 ... Own address type: Public (0x00) This causes either the controller to emit an Invalid Parameters error or to mishandle the advertising. This patch makes sure that we use the already set static random address when requesting a connectable extended advertising when we don't require privacy and our public address is not set (00:00:00:00:00:00). Fixes: 3fe318ee72c5 ("Bluetooth: move hci_get_random_address() to hci_sync") Signed-off-by: Alessandro Gasbarroni <alex.gasbarroni@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-16Bluetooth: Fix null-ptr-deref in l2cap_sock_resume_cb()Kuniyuki Iwashima
syzbot reported null-ptr-deref in l2cap_sock_resume_cb(). [0] l2cap_sock_resume_cb() has a similar problem that was fixed by commit 1bff51ea59a9 ("Bluetooth: fix use-after-free error in lock_sock_nested()"). Since both l2cap_sock_kill() and l2cap_sock_resume_cb() are executed under l2cap_sock_resume_cb(), we can avoid the issue simply by checking if chan->data is NULL. Let's not access to the killed socket in l2cap_sock_resume_cb(). [0]: BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:82 [inline] BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline] BUG: KASAN: null-ptr-deref in l2cap_sock_resume_cb+0xb4/0x17c net/bluetooth/l2cap_sock.c:1711 Write of size 8 at addr 0000000000000570 by task kworker/u9:0/52 CPU: 1 UID: 0 PID: 52 Comm: kworker/u9:0 Not tainted 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Workqueue: hci0 hci_rx_work Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:501 (C) __dump_stack+0x30/0x40 lib/dump_stack.c:94 dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120 print_report+0x58/0x84 mm/kasan/report.c:524 kasan_report+0xb0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:-1 [inline] kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189 __kasan_check_write+0x20/0x30 mm/kasan/shadow.c:37 instrument_atomic_write include/linux/instrumented.h:82 [inline] clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline] l2cap_sock_resume_cb+0xb4/0x17c net/bluetooth/l2cap_sock.c:1711 l2cap_security_cfm+0x524/0xea0 net/bluetooth/l2cap_core.c:7357 hci_auth_cfm include/net/bluetooth/hci_core.h:2092 [inline] hci_auth_complete_evt+0x2e8/0xa4c net/bluetooth/hci_event.c:3514 hci_event_func net/bluetooth/hci_event.c:7511 [inline] hci_event_packet+0x650/0xe9c net/bluetooth/hci_event.c:7565 hci_rx_work+0x320/0xb18 net/bluetooth/hci_core.c:4070 process_one_work+0x7e8/0x155c kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3321 [inline] worker_thread+0x958/0xed8 kernel/workqueue.c:3402 kthread+0x5fc/0x75c kernel/kthread.c:464 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:847 Fixes: d97c899bde33 ("Bluetooth: Introduce L2CAP channel callback for resuming") Reported-by: syzbot+e4d73b165c3892852d22@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/686c12bd.a70a0220.29fe6c.0b13.GAE@google.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-07-16ovpn: reset GSO metadata after decapsulationRalf Lici
The ovpn_netdev_write() function is responsible for injecting decapsulated and decrypted packets back into the local network stack. Prior to this patch, the skb could retain GSO metadata from the outer, encrypted tunnel packet. This original GSO metadata, relevant to the sender's transport context, becomes invalid and misleading for the tunnel/data path once the inner packet is exposed. Leaving this stale metadata intact causes internal GSO validation checks further down the kernel's network stack (validate_xmit_skb()) to fail, leading to packet drops. The reasons for these failures vary by protocol, for example: - for ICMP, no offload handler is registered; - for TCP and UDP, the respective offload handlers return errors when comparing skb->len to the outdated skb_shinfo(skb)->gso_size. By calling skb_gso_reset(skb) we ensure the inner packet is presented to gro_cells_receive() with a clean state, correctly indicating it is an individual packet from the perspective of the local stack. This change eliminates the "Driver has suspect GRO implementation, TCP performance may be compromised" warning and improves overall TCP performance by allowing GSO/GRO to function as intended on the decapsulated traffic. Fixes: 11851cbd60ea ("ovpn: implement TCP transport") Reported-by: Gert Doering <gert@greenie.muc.de> Closes: https://github.com/OpenVPN/ovpn-net-next/issues/4 Tested-by: Gert Doering <gert@greenie.muc.de> Signed-off-by: Ralf Lici <ralf@mandelbit.com> Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-07-16ovpn: reject unexpected netlink attributesAntonio Quartulli
Netlink ops do not expect all attributes to be always set, however this condition is not explicitly coded any where, leading the user to believe that all sent attributes are somewhat processed. Fix this behaviour by introducing explicit checks. For CMD_OVPN_PEER_GET and CMD_OVPN_KEY_GET directly open-code the needed condition in the related ops handlers. While for all other ops use attribute subsets in the ovpn.yaml spec file. Fixes: b7a63391aa98 ("ovpn: add basic netlink support") Reported-by: Ralf Lici <ralf@mandelbit.com> Closes: https://github.com/OpenVPN/ovpn-net-next/issues/19 Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-07-16ovpn: propagate socket mark to skb in UDPRalf Lici
OpenVPN allows users to configure a FW mark on sockets used to communicate with other peers. The mark is set by means of the `SO_MARK` Linux socket option. However, in the ovpn UDP code path, the socket's `sk_mark` value is currently ignored and it is not propagated to outgoing `skbs`. This commit ensures proper inheritance of the field by setting `skb->mark` to `sk->sk_mark` before handing the `skb` to the network stack for transmission. Fixes: 08857b5ec5d9 ("ovpn: implement basic TX path (UDP)") Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Ralf Lici <ralf@mandelbit.com> Link: https://www.mail-archive.com/openvpn-devel@lists.sourceforge.net/msg31877.html Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
2025-07-16tracing/probes: Avoid using params uninitialized in parse_btf_arg()Nathan Chancellor
After a recent change in clang to strengthen uninitialized warnings [1], it points out that in one of the error paths in parse_btf_arg(), params is used uninitialized: kernel/trace/trace_probe.c:660:19: warning: variable 'params' is uninitialized when used here [-Wuninitialized] 660 | return PTR_ERR(params); | ^~~~~~ Match many other NO_BTF_ENTRY error cases and return -ENOENT, clearing up the warning. Link: https://lore.kernel.org/all/20250715-trace_probe-fix-const-uninit-warning-v1-1-98960f91dd04@kernel.org/ Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/2110 Fixes: d157d7694460 ("tracing/probes: Support BTF field access from $retval") Link: https://github.com/llvm/llvm-project/commit/2464313eef01c5b1edf0eccf57a32cdee01472c7 [1] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2025-07-15Merge branch 'mptcp-fix-fallback-related-races'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: fix fallback-related races This series contains 3 fixes somewhat related to various races we have while handling fallback. The root cause of the issues addressed here is that the check for "we can fallback to tcp now" and the related action are not atomic. That also applies to fallback due to MP_FAIL -- where the window race is even wider. Address the issue introducing an additional spinlock to bundle together all the relevant events, as per patch 1 and 2. These fixes can be backported up to v5.19 and v5.15. Note that mptcp_disconnect() unconditionally clears the fallback status (zeroing msk->flags) but don't touch the `allows_infinite_fallback` flag. Such issue is addressed in patch 3, and can be backported up to v5.17. ==================== Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-0-391aff963322@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15mptcp: reset fallback status gracefully at disconnect() timePaolo Abeni
mptcp_disconnect() clears the fallback bit unconditionally, without touching the associated flags. The bit clear is safe, as no fallback operation can race with that -- all subflow are already in TCP_CLOSE status thanks to the previous FASTCLOSE -- but we need to consistently reset all the fallback related status. Also acquire the relevant lock, to avoid fouling static analyzers. Fixes: b29fcfb54cd7 ("mptcp: full disconnect implementation") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-3-391aff963322@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15mptcp: plug races between subflow fail and subflow creationPaolo Abeni
We have races similar to the one addressed by the previous patch between subflow failing and additional subflow creation. They are just harder to trigger. The solution is similar. Use a separate flag to track the condition 'socket state prevent any additional subflow creation' protected by the fallback lock. The socket fallback makes such flag true, and also receiving or sending an MP_FAIL option. The field 'allow_infinite_fallback' is now always touched under the relevant lock, we can drop the ONCE annotation on write. Fixes: 478d770008b0 ("mptcp: send out MP_FAIL when data checksum fails") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-2-391aff963322@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15mptcp: make fallback action and fallback decision atomicPaolo Abeni
Syzkaller reported the following splat: WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 __mptcp_do_fallback net/mptcp/protocol.h:1223 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_do_fallback net/mptcp/protocol.h:1244 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 check_fully_established net/mptcp/options.c:982 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153 Modules linked in: CPU: 1 UID: 0 PID: 7704 Comm: syz.3.1419 Not tainted 6.16.0-rc3-gbd5ce2324dba #20 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__mptcp_do_fallback net/mptcp/protocol.h:1223 [inline] RIP: 0010:mptcp_do_fallback net/mptcp/protocol.h:1244 [inline] RIP: 0010:check_fully_established net/mptcp/options.c:982 [inline] RIP: 0010:mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153 Code: 24 18 e8 bb 2a 00 fd e9 1b df ff ff e8 b1 21 0f 00 e8 ec 5f c4 fc 44 0f b7 ac 24 b0 00 00 00 e9 54 f1 ff ff e8 d9 5f c4 fc 90 <0f> 0b 90 e9 b8 f4 ff ff e8 8b 2a 00 fd e9 8d e6 ff ff e8 81 2a 00 RSP: 0018:ffff8880a3f08448 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880180a8000 RCX: ffffffff84afcf45 RDX: ffff888090223700 RSI: ffffffff84afdaa7 RDI: 0000000000000001 RBP: ffff888017955780 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8880180a8910 R14: ffff8880a3e9d058 R15: 0000000000000000 FS: 00005555791b8500(0000) GS:ffff88811c495000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c2800b7 CR3: 0000000058e44000 CR4: 0000000000350ef0 Call Trace: <IRQ> tcp_reset+0x26f/0x2b0 net/ipv4/tcp_input.c:4432 tcp_validate_incoming+0x1057/0x1b60 net/ipv4/tcp_input.c:5975 tcp_rcv_established+0x5b5/0x21f0 net/ipv4/tcp_input.c:6166 tcp_v4_do_rcv+0x5dc/0xa70 net/ipv4/tcp_ipv4.c:1925 tcp_v4_rcv+0x3473/0x44a0 net/ipv4/tcp_ipv4.c:2363 ip_protocol_deliver_rcu+0xba/0x480 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2f1/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:317 [inline] NF_HOOK include/linux/netfilter.h:311 [inline] ip_local_deliver+0x1be/0x560 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:469 [inline] ip_rcv_finish net/ipv4/ip_input.c:447 [inline] NF_HOOK include/linux/netfilter.h:317 [inline] NF_HOOK include/linux/netfilter.h:311 [inline] ip_rcv+0x514/0x810 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5975 __netif_receive_skb+0x1f/0x120 net/core/dev.c:6088 process_backlog+0x301/0x1360 net/core/dev.c:6440 __napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7453 napi_poll net/core/dev.c:7517 [inline] net_rx_action+0xb44/0x1010 net/core/dev.c:7644 handle_softirqs+0x1d0/0x770 kernel/softirq.c:579 do_softirq+0x3f/0x90 kernel/softirq.c:480 </IRQ> <TASK> __local_bh_enable_ip+0xed/0x110 kernel/softirq.c:407 local_bh_enable include/linux/bottom_half.h:33 [inline] inet_csk_listen_stop+0x2c5/0x1070 net/ipv4/inet_connection_sock.c:1524 mptcp_check_listen_stop.part.0+0x1cc/0x220 net/mptcp/protocol.c:2985 mptcp_check_listen_stop net/mptcp/mib.h:118 [inline] __mptcp_close+0x9b9/0xbd0 net/mptcp/protocol.c:3000 mptcp_close+0x2f/0x140 net/mptcp/protocol.c:3066 inet_release+0xed/0x200 net/ipv4/af_inet.c:435 inet6_release+0x4f/0x70 net/ipv6/af_inet6.c:487 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x402/0xb70 fs/file_table.c:465 task_work_run+0x150/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xd4/0xe0 kernel/entry/common.c:114 exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline] do_syscall_64+0x245/0x360 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc92f8a36ad Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffcf52802d8 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00007ffcf52803a8 RCX: 00007fc92f8a36ad RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007fc92fae7ba0 R08: 0000000000000001 R09: 0000002800000000 R10: 00007fc92f700000 R11: 0000000000000246 R12: 00007fc92fae5fac R13: 00007fc92fae5fa0 R14: 0000000000026d00 R15: 0000000000026c51 </TASK> irq event stamp: 4068 hardirqs last enabled at (4076): [<ffffffff81544816>] __up_console_sem+0x76/0x80 kernel/printk/printk.c:344 hardirqs last disabled at (4085): [<ffffffff815447fb>] __up_console_sem+0x5b/0x80 kernel/printk/printk.c:342 softirqs last enabled at (3096): [<ffffffff840e1be0>] local_bh_enable include/linux/bottom_half.h:33 [inline] softirqs last enabled at (3096): [<ffffffff840e1be0>] inet_csk_listen_stop+0x2c0/0x1070 net/ipv4/inet_connection_sock.c:1524 softirqs last disabled at (3097): [<ffffffff813b6b9f>] do_softirq+0x3f/0x90 kernel/softirq.c:480 Since we need to track the 'fallback is possible' condition and the fallback status separately, there are a few possible races open between the check and the actual fallback action. Add a spinlock to protect the fallback related information and use it close all the possible related races. While at it also remove the too-early clearing of allow_infinite_fallback in __mptcp_subflow_connect(): the field will be correctly cleared by subflow_finish_connect() if/when the connection will complete successfully. If fallback is not possible, as per RFC, reset the current subflow. Since the fallback operation can now fail and return value should be checked, rename the helper accordingly. Fixes: 0530020a7c8f ("mptcp: track and update contiguous data status") Cc: stable@vger.kernel.org Reported-by: Matthieu Baerts <matttbe@kernel.org> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/570 Reported-by: syzbot+5cf807c20386d699b524@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/555 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-1-391aff963322@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: libwx: fix multicast packets received countJiawen Wu
Multicast good packets received by PF rings that pass ethternet MAC address filtering are counted for rtnl_link_stats64.multicast. The counter is not cleared on read. Fix the duplicate counting on updating statistics. Fixes: 46b92e10d631 ("net: libwx: support hardware statistics") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/DA229A4F58B70E51+20250714015656.91772-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15Merge branch 'fix-rx-fatal-errors'Jakub Kicinski
Jiawen Wu says: ==================== Fix Rx fatal errors There are some fatal errors on the Rx NAPI path, which can cause the kernel to crash. Fix known issues and potential risks. The part of the patches has been mentioned before[1]. [1]: https://lore.kernel.org/all/C8A23A11DB646E60+20250630094102.22265-1-jiawenwu@trustnetic.com/ v1: https://lore.kernel.org/20250709064025.19436-1-jiawenwu@trustnetic.com ==================== Link: https://patch.msgid.link/20250714024755.17512-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: libwx: properly reset Rx ring descriptorJiawen Wu
When device reset is triggered by feature changes such as toggling Rx VLAN offload, wx->do_reset() is called to reinitialize Rx rings. The hardware descriptor ring may retain stale values from previous sessions. And only set the length to 0 in rx_desc[0] would result in building malformed SKBs. Fix it to ensure a clean slate after device reset. [ 549.186435] [ C16] ------------[ cut here ]------------ [ 549.186457] [ C16] kernel BUG at net/core/skbuff.c:2814! [ 549.186468] [ C16] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 549.186472] [ C16] CPU: 16 UID: 0 PID: 0 Comm: swapper/16 Kdump: loaded Not tainted 6.16.0-rc4+ #23 PREEMPT(voluntary) [ 549.186476] [ C16] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 549.186478] [ C16] RIP: 0010:__pskb_pull_tail+0x3ff/0x510 [ 549.186484] [ C16] Code: 06 f0 ff 4f 34 74 7b 4d 8b 8c 24 c8 00 00 00 45 8b 84 24 c0 00 00 00 e9 c8 fd ff ff 48 c7 44 24 08 00 00 00 00 e9 5e fe ff ff <0f> 0b 31 c0 e9 23 90 5b ff 41 f7 c6 ff 0f 00 00 75 bf 49 8b 06 a8 [ 549.186487] [ C16] RSP: 0018:ffffb391c0640d70 EFLAGS: 00010282 [ 549.186490] [ C16] RAX: 00000000fffffff2 RBX: ffff8fe7e4d40200 RCX: 00000000fffffff2 [ 549.186492] [ C16] RDX: ffff8fe7c3a4bf8e RSI: 0000000000000180 RDI: ffff8fe7c3a4bf40 [ 549.186494] [ C16] RBP: ffffb391c0640da8 R08: ffff8fe7c3a4c0c0 R09: 000000000000000e [ 549.186496] [ C16] R10: ffffb391c0640d88 R11: 000000000000000e R12: ffff8fe7e4d40200 [ 549.186497] [ C16] R13: 00000000fffffff2 R14: ffff8fe7fa01a000 R15: 00000000fffffff2 [ 549.186499] [ C16] FS: 0000000000000000(0000) GS:ffff8fef5ae40000(0000) knlGS:0000000000000000 [ 549.186502] [ C16] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.186503] [ C16] CR2: 00007f77d81d6000 CR3: 000000051a032000 CR4: 0000000000750ef0 [ 549.186505] [ C16] PKRU: 55555554 [ 549.186507] [ C16] Call Trace: [ 549.186510] [ C16] <IRQ> [ 549.186513] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186517] [ C16] __skb_pad+0xc7/0xf0 [ 549.186523] [ C16] wx_clean_rx_irq+0x355/0x3b0 [libwx] [ 549.186533] [ C16] wx_poll+0x92/0x120 [libwx] [ 549.186540] [ C16] __napi_poll+0x28/0x190 [ 549.186544] [ C16] net_rx_action+0x301/0x3f0 [ 549.186548] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186551] [ C16] ? __raw_spin_lock_irqsave+0x1e/0x50 [ 549.186554] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186557] [ C16] ? wake_up_nohz_cpu+0x35/0x160 [ 549.186559] [ C16] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.186563] [ C16] handle_softirqs+0xf9/0x2c0 [ 549.186568] [ C16] __irq_exit_rcu+0xc7/0x130 [ 549.186572] [ C16] common_interrupt+0xb8/0xd0 [ 549.186576] [ C16] </IRQ> [ 549.186577] [ C16] <TASK> [ 549.186579] [ C16] asm_common_interrupt+0x22/0x40 [ 549.186582] [ C16] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 549.186585] [ C16] Code: 00 00 e8 11 0e 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 0d ed 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 549.186587] [ C16] RSP: 0018:ffffb391c0277e78 EFLAGS: 00000246 [ 549.186590] [ C16] RAX: ffff8fef5ae40000 RBX: 0000000000000003 RCX: 0000000000000000 [ 549.186591] [ C16] RDX: 0000007fde0faac5 RSI: ffffffff826e53f6 RDI: ffffffff826fa9b3 [ 549.186593] [ C16] RBP: ffff8fe7c3a20800 R08: 0000000000000002 R09: 0000000000000000 [ 549.186595] [ C16] R10: 0000000000000000 R11: 000000000000ffff R12: ffffffff82ed7a40 [ 549.186596] [ C16] R13: 0000007fde0faac5 R14: 0000000000000003 R15: 0000000000000000 [ 549.186601] [ C16] ? cpuidle_enter_state+0xb3/0x420 [ 549.186605] [ C16] cpuidle_enter+0x29/0x40 [ 549.186609] [ C16] cpuidle_idle_call+0xfd/0x170 [ 549.186613] [ C16] do_idle+0x7a/0xc0 [ 549.186616] [ C16] cpu_startup_entry+0x25/0x30 [ 549.186618] [ C16] start_secondary+0x117/0x140 [ 549.186623] [ C16] common_startup_64+0x13e/0x148 [ 549.186628] [ C16] </TASK> Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250714024755.17512-4-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: libwx: fix the using of Rx buffer DMAJiawen Wu
The wx_rx_buffer structure contained two DMA address fields: 'dma' and 'page_dma'. However, only 'page_dma' was actually initialized and used to program the Rx descriptor. But 'dma' was uninitialized and used in some paths. This could lead to undefined behavior, including DMA errors or use-after-free, if the uninitialized 'dma' was used. Althrough such error has not yet occurred, it is worth fixing in the code. Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250714024755.17512-3-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: libwx: remove duplicate page_pool_put_full_page()Jiawen Wu
page_pool_put_full_page() should only be invoked when freeing Rx buffers or building a skb if the size is too short. At other times, the pages need to be reused. So remove the redundant page put. In the original code, double free pages cause kernel panic: [ 876.949834] __irq_exit_rcu+0xc7/0x130 [ 876.949836] common_interrupt+0xb8/0xd0 [ 876.949838] </IRQ> [ 876.949838] <TASK> [ 876.949840] asm_common_interrupt+0x22/0x40 [ 876.949841] RIP: 0010:cpuidle_enter_state+0xc2/0x420 [ 876.949843] Code: 00 00 e8 d1 1d 5e ff e8 ac f0 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 cd fc 5c ff 45 84 ff 0f 85 40 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 84 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 876.949844] RSP: 0018:ffffaa7340267e78 EFLAGS: 00000246 [ 876.949845] RAX: ffff9e3f135be000 RBX: 0000000000000002 RCX: 0000000000000000 [ 876.949846] RDX: 000000cc2dc4cb7c RSI: ffffffff89ee49ae RDI: ffffffff89ef9f9e [ 876.949847] RBP: ffff9e378f940800 R08: 0000000000000002 R09: 00000000000000ed [ 876.949848] R10: 000000000000afc8 R11: ffff9e3e9e5a9b6c R12: ffffffff8a6d8580 [ 876.949849] R13: 000000cc2dc4cb7c R14: 0000000000000002 R15: 0000000000000000 [ 876.949852] ? cpuidle_enter_state+0xb3/0x420 [ 876.949855] cpuidle_enter+0x29/0x40 [ 876.949857] cpuidle_idle_call+0xfd/0x170 [ 876.949859] do_idle+0x7a/0xc0 [ 876.949861] cpu_startup_entry+0x25/0x30 [ 876.949862] start_secondary+0x117/0x140 [ 876.949864] common_startup_64+0x13e/0x148 [ 876.949867] </TASK> [ 876.949868] ---[ end trace 0000000000000000 ]--- [ 876.949869] ------------[ cut here ]------------ [ 876.949870] list_del corruption, ffffead40445a348->next is NULL [ 876.949873] WARNING: CPU: 14 PID: 0 at lib/list_debug.c:52 __list_del_entry_valid_or_report+0x67/0x120 [ 876.949875] Modules linked in: snd_hrtimer(E) bnep(E) binfmt_misc(E) amdgpu(E) squashfs(E) vfat(E) loop(E) fat(E) amd_atl(E) snd_hda_codec_realtek(E) intel_rapl_msr(E) snd_hda_codec_generic(E) intel_rapl_common(E) snd_hda_scodec_component(E) snd_hda_codec_hdmi(E) snd_hda_intel(E) edac_mce_amd(E) snd_intel_dspcfg(E) snd_hda_codec(E) snd_hda_core(E) amdxcp(E) kvm_amd(E) snd_hwdep(E) gpu_sched(E) drm_panel_backlight_quirks(E) cec(E) snd_pcm(E) drm_buddy(E) snd_seq_dummy(E) drm_ttm_helper(E) btusb(E) kvm(E) snd_seq_oss(E) btrtl(E) ttm(E) btintel(E) snd_seq_midi(E) btbcm(E) drm_exec(E) snd_seq_midi_event(E) i2c_algo_bit(E) snd_rawmidi(E) bluetooth(E) drm_suballoc_helper(E) irqbypass(E) snd_seq(E) ghash_clmulni_intel(E) sha512_ssse3(E) drm_display_helper(E) aesni_intel(E) snd_seq_device(E) rfkill(E) snd_timer(E) gf128mul(E) drm_client_lib(E) drm_kms_helper(E) snd(E) i2c_piix4(E) joydev(E) soundcore(E) wmi_bmof(E) ccp(E) k10temp(E) i2c_smbus(E) gpio_amdpt(E) i2c_designware_platform(E) gpio_generic(E) sg(E) [ 876.949914] i2c_designware_core(E) sch_fq_codel(E) parport_pc(E) drm(E) ppdev(E) lp(E) parport(E) fuse(E) nfnetlink(E) ip_tables(E) ext4 crc16 mbcache jbd2 sd_mod sfp mdio_i2c i2c_core txgbe ahci ngbe pcs_xpcs libahci libwx r8169 phylink libata realtek ptp pps_core video wmi [ 876.949933] CPU: 14 UID: 0 PID: 0 Comm: swapper/14 Kdump: loaded Tainted: G W E 6.16.0-rc2+ #20 PREEMPT(voluntary) [ 876.949935] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE [ 876.949936] Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 [ 876.949936] RIP: 0010:__list_del_entry_valid_or_report+0x67/0x120 [ 876.949938] Code: 00 00 00 48 39 7d 08 0f 85 a6 00 00 00 5b b8 01 00 00 00 5d 41 5c e9 73 0d 93 ff 48 89 fe 48 c7 c7 a0 31 e8 89 e8 59 7c b3 ff <0f> 0b 31 c0 5b 5d 41 5c e9 57 0d 93 ff 48 89 fe 48 c7 c7 c8 31 e8 [ 876.949940] RSP: 0018:ffffaa73405d0c60 EFLAGS: 00010282 [ 876.949941] RAX: 0000000000000000 RBX: ffffead40445a348 RCX: 0000000000000000 [ 876.949942] RDX: 0000000000000105 RSI: 0000000000000001 RDI: 00000000ffffffff [ 876.949943] RBP: 0000000000000000 R08: 000000010006dfde R09: ffffffff8a47d150 [ 876.949944] R10: ffffffff8a47d150 R11: 0000000000000003 R12: dead000000000122 [ 876.949945] R13: ffff9e3e9e5af700 R14: ffffead40445a348 R15: ffff9e3e9e5af720 [ 876.949946] FS: 0000000000000000(0000) GS:ffff9e3f135be000(0000) knlGS:0000000000000000 [ 876.949947] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 876.949948] CR2: 00007fa58b480048 CR3: 0000000156724000 CR4: 0000000000750ef0 [ 876.949949] PKRU: 55555554 [ 876.949950] Call Trace: [ 876.949951] <IRQ> [ 876.949952] __rmqueue_pcplist+0x53/0x2c0 [ 876.949955] alloc_pages_bulk_noprof+0x2e0/0x660 [ 876.949958] __page_pool_alloc_pages_slow+0xa9/0x400 [ 876.949961] page_pool_alloc_pages+0xa/0x20 [ 876.949963] wx_alloc_rx_buffers+0xd7/0x110 [libwx] [ 876.949967] wx_clean_rx_irq+0x262/0x430 [libwx] [ 876.949971] wx_poll+0x92/0x130 [libwx] [ 876.949975] __napi_poll+0x28/0x190 [ 876.949977] net_rx_action+0x301/0x3f0 [ 876.949980] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949981] ? profile_tick+0x30/0x70 [ 876.949983] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949984] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949986] ? timerqueue_add+0xa3/0xc0 [ 876.949988] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949989] ? __raise_softirq_irqoff+0x16/0x70 [ 876.949991] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949993] ? srso_alias_return_thunk+0x5/0xfbef5 [ 876.949994] ? wx_msix_clean_rings+0x41/0x50 [libwx] [ 876.949998] handle_softirqs+0xf9/0x2c0 Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250714024755.17512-2-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15Merge branch 'net-hns3-use-seq_file-for-debugfs'Jakub Kicinski
Jijie Shao says: ==================== net: hns3: use seq_file for debugfs Arnd reported that there are two build warning for on-stasck buffer oversize. As Arnd's suggestion, using seq file way to avoid the stack buffer or kmalloc buffer allocating. v2: https://lore.kernel.org/20250711061725.225585-1-shaojijie@huawei.com v1: https://lore.kernel.org/20250708130029.1310872-1-shaojijie@huawei.com ==================== Link: https://patch.msgid.link/20250714061037.2616413-1-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: hns3: use seq_file for files in tx_bd_info/ and rx_bd_info/ in debugfsJian Shen
This patch use seq_file for the following nodes: tx_bd_queue_*/rx_bd_queue_* This patch is the last modification to debugfs file. Unused functions and variables are removed together. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250714061037.2616413-11-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: hns3: use seq_file for files in common/ of hclge layerYonglong Liu
This patch use seq_file for the following nodes: mng_tbl/loopback/interrupt_info/reset_info/imp_info/ncl_config/ mac_tnl_status/service_task_info/vlan_config/ptp_info This patch is the last modification to debugfs file of hclge layer. Unused functions and variables are removed together. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250714061037.2616413-10-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: hns3: use seq_file for files in fd/ in debugfsJijie Shao
This patch use seq_file for the following nodes: fd_tcam/fd_counter Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250714061037.2616413-9-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: hns3: use seq_file for files in reg/ in debugfsJijie Shao
This patch use seq_file for the following nodes: bios_common/ssu/igu_egu/rpu/ncsi/rtc/ppp/rcb/tqp/mac/dcb Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250714061037.2616413-8-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: hns3: use seq_file for files in mac_list/ in debugfsYonglong Liu
This patch use seq_file for the following nodes: uc/mc Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250714061037.2616413-7-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: hns3: use seq_file for files in tm/ in debugfsJian Shen
Use seq_file for files in debugfs. This is the first modification for reading in hclge_debugfs.c. This patch use seq_file for the following nodes: tm_nodes/tm_priority/tm_qset/tm_map/tm_pg/tm_port/tc_sch_info/ qos_pause_cfg/qos_pri_map/qos_dscp_map/qos_buf_cfg Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250714061037.2616413-6-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: hns3: use seq_file for files in common/ of hns3 layerJijie Shao
This patch use seq_file for the following nodes: dev_info/coalesce_info/page_pool_info Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250714061037.2616413-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: hns3: use seq_file for files in queue/ in debugfsJian Shen
This patch use seq_file for the following nodes: rx_queue_info/queue_map Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250714061037.2616413-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: hns3: clean up the build warning in debugfs by use seq fileJian Shen
Arnd reported that there are two build warning for on-stasck buffer oversize. As Arnd's suggestion, using seq file way to avoid the stack buffer or kmalloc buffer allocating. Reported-by: Arnd Bergmann <arnd@kernel.org> Closes: https://lore.kernel.org/all/20250610092113.2639248-1-arnd@kernel.org/ Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250714061037.2616413-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: hns3: remove tx spare info from debugfs.Jijie Shao
The tx spare info in debugfs is not very useful, and there are related statistics available for troubleshooting. This patch removes the tx spare info from debugfs. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250714061037.2616413-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15ipv6: mcast: Remove unnecessary null check in ip6_mc_find_dev()Yue Haibing
These is no need to check null for idev before return NULL. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250714081732.3109764-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15net: stmmac: intel: populate entire system_counterval_t in get_time_fn() ↵Markus Blöchl
callback get_time_fn() callback implementations are expected to fill out the entire system_counterval_t struct as it may be initially uninitialized. This broke with the removal of convert_art_to_tsc() helper functions which left use_nsecs uninitialized. Initially assign the entire struct with default values. Fixes: f5e1d0db3f02 ("stmmac: intel: Remove convert_art_to_tsc()") Cc: stable@vger.kernel.org Signed-off-by: Markus Blöchl <markus@blochl.de> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250713-stmmac_crossts-v1-1-31bfe051b5cb@blochl.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15don't open-code kernel_accept() in rds_tcp_accept_one()Al Viro
rds_tcp_accept_one() starts with a pretty much verbatim copy of kernel_accept(). Might as well use the real thing... That code went into mainline in 2009, kernel_accept() had been added in Aug 2006, the copyright on rds/tcp_listen.c is "Copyright (c) 2006 Oracle", so it's entirely possible that it predates the introduction of kernel_accept(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://patch.msgid.link/20250713180134.GC1880847@ZenIV Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15Merge tag 'linux-can-fixes-for-6.16-20250715' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2025-07-15 Brett Werling's patch for the tcan4x5x glue code driver fixes the detection of chips which are held in reset/sleep and must be woken up by GPIO prior to communication. * tag 'linux-can-fixes-for-6.16-20250715' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: tcan4x5x: fix reset gpio usage during probe ==================== Link: https://patch.msgid.link/20250715101625.3202690-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15bnxt: move bnxt_hsi.h to include/linux/bnxt/hsi.hAndy Gospodarek
This moves bnxt_hsi.h contents to a common location so it can be properly referenced by bnxt_en, bnxt_re, and bnge. Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250714170202.39688-1-gospo@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15usb: net: sierra: check for no status endpointOliver Neukum
The driver checks for having three endpoints and having bulk in and out endpoints, but not that the third endpoint is interrupt input. Rectify the omission. Reported-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/686d5a9f.050a0220.1ffab7.0017.GAE@google.com/ Tested-by: syzbot+3f89ec3d1d0842e95d50@syzkaller.appspotmail.com Fixes: eb4fd8cd355c8 ("net/usb: add sierra_net.c driver") Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://patch.msgid.link/20250714111326.258378-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15ice: check correct pointer in fwlog debugfsMichal Swiatkowski
pf->ice_debugfs_pf_fwlog should be checked for an error here. Fixes: 96a9a9341cda ("ice: configure FW logging") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-15ice: add NULL check in eswitch lag checkDave Ertman
The function ice_lag_is_switchdev_running() is being called from outside of the LAG event handler code. This results in the lag->upper_netdev being NULL sometimes. To avoid a NULL-pointer dereference, there needs to be a check before it is dereferenced. Fixes: 776fe19953b0 ("ice: block default rule setting on LAG interface") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-15ethernet: intel: fix building with large NR_CPUSArnd Bergmann
With large values of CONFIG_NR_CPUS, three Intel ethernet drivers fail to compile like: In function ‘i40e_free_q_vector’, inlined from ‘i40e_vsi_alloc_q_vectors’ at drivers/net/ethernet/intel/i40e/i40e_main.c:12112:3: 571 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) include/linux/rcupdate.h:1084:17: note: in expansion of macro ‘BUILD_BUG_ON’ 1084 | BUILD_BUG_ON(offsetof(typeof(*(ptr)), rhf) >= 4096); \ drivers/net/ethernet/intel/i40e/i40e_main.c:5113:9: note: in expansion of macro ‘kfree_rcu’ 5113 | kfree_rcu(q_vector, rcu); | ^~~~~~~~~ The problem is that the 'rcu' member in 'q_vector' is too far from the start of the structure. Move this member before the CPU mask instead, in all three drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-07-15Merge tag 'soc-fixes-6.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "There are 18 devicetree fixes for three arm64 plaforms: Qualcomm Snapdragon, Rockchips and NXP i.MX. These get updated to more correctly describe the hardware, fixing issues with: - real-time clock on Snapdragon based laptops - SD card detection, PCI probing and HDMI/DDC communication on Rockchips - ethernet and SPI probing on certain i.MX based boards - a regression with the i.MX watchdog Aside from the devicetree fixes, there are two additional fixes for the merged ASPEED LPC snoop driver that saw some changes in 6.16, and one additional driver enabled in arm64 defconfig to fix CPU frequency scaling" * tag 'soc-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) arm64: dts: freescale: imx8mm-verdin: Keep LDO5 always on soc: aspeed: lpc-snoop: Don't disable channels that aren't enabled soc: aspeed: lpc-snoop: Cleanup resources in stack-order arm64: dts: imx95: Correct the DMA interrupter number of pcie0_ep arm64: dts: rockchip: Add missing fan-supply to rk3566-quartz64-a arm64: dts: rockchip: use cs-gpios for spi1 on ringneck arm64: dts: add big-endian property back into watchdog node arm64: dts: imx95-15x15-evk: fix the overshoot issue of NETC arm64: dts: imx95-19x19-evk: fix the overshoot issue of NETC arm64: dts: rockchip: list all CPU supplies on ArmSoM Sige5 arm64: dts: imx8mp-venice-gw74xx: fix TPM SPI frequency arm64: dts: imx8mp-venice-gw73xx: fix TPM SPI frequency arm64: dts: imx8mp-venice-gw72xx: fix TPM SPI frequency arm64: dts: imx8mp-venice-gw71xx: fix TPM SPI frequency arm64: dts: qcom: x1e80100: describe uefi rtc offset arm64: dts: qcom: sc8280xp-x13s: describe uefi rtc offset arm64: defconfig: Enable Qualcomm CPUCP mailbox driver arm64: dts: rockchip: Add cd-gpios for sdcard detect on Cool Pi 4B arm64: dts: rockchip: Add cd-gpios for sdcard detect on Cool Pi CM5 arm64: dts: rockchip: Adjust the HDMI DDC IO driver strength for rk3588 ...
2025-07-15Merge tag 'hid-for-linus-2025071501' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - one warning cleanup introduced in the last PR (Andy Shevchenko) - a nasty syzbot buffer underflow fix co-debugged with Alan Stern (Benjamin Tissoires) * tag 'hid-for-linus-2025071501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: selftests/hid: add a test case for the recent syzbot underflow HID: core: do not bypass hid_hw_raw_request HID: core: ensure __hid_request reserves the report ID as the first byte HID: core: ensure the allocated report buffer can contain the reserved report ID HID: debug: Remove duplicate entry (BTN_WHEEL)
2025-07-15selftests: net: increase inter-packet timeout in udpgro.shPaolo Abeni
The mentioned test is not very stable when running on top of debug kernel build. Increase the inter-packet timeout to allow more slack in such environments. Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO") Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/b0370c06ddb3235debf642c17de0284b2cd3c652.1752163107.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-15PM: sleep: Update power.completion for all devices on errorsRafael J. Wysocki
After commit aa7a9275ab81 ("PM: sleep: Suspend async parents after suspending children"), the following scenario is possible: 1. Device A is async and it depends on device B that is sync. 2. Async suspend is scheduled for A before the processing of B is started. 3. A is waiting for B. 4. In the meantime, an unrelated device fails to suspend and returns an error. 5. The processing of B doesn't start at all and its power.completion is not updated. 6. A is still waiting for B when async_synchronize_full() is called. 7. Deadlock ensues. To prevent this from happening, update power.completion for all devices on errors in all suspend phases, but do not do it directly for devices that are already being processed or are waiting for the processing to start because in those cases it may be necessary to wait for the processing to actually complete before updating power.completion for the device. Fixes: aa7a9275ab81 ("PM: sleep: Suspend async parents after suspending children") Fixes: 443046d1ad66 ("PM: sleep: Make suspend of devices more asynchronous") Closes: https://lore.kernel.org/linux-pm/e13740a0-88f3-4a6f-920f-15805071a7d6@linaro.org/ Reported-and-tested-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://patch.msgid.link/6191258.lOV4Wx5bFT@rjwysocki.net
generated by cgit (git 2.34.1) at 2025-09-11 15:33:13 +0000