summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-10octeontx2-af: advertised link modes support on cgxChristina Jacob
CGX supports setting advertised link modes on physical link. This patch adds support to derive cgx mode from ethtool link mode and pass it to firmware to configure the same. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: Physical link configuration supportChristina Jacob
CGX LMAC, the physical interface support link configuration parameters like speed, auto negotiation, duplex etc. Firmware saves these into memory region shared between firmware and this driver. This patch adds mailbox handler set_link_mode, fw_data_get to configure and read these parameters. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-pf: ethtool fec mode supportChristina Jacob
Add ethtool support to configure fec modes baser/rs and support to fecth FEC stats from CGX as well PHY. Configure fec mode - ethtool --set-fec eth0 encoding rs/baser/off/auto Query fec mode - ethtool --show-fec eth0 Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: Add new CGX_CMD to get PHY FEC statisticsFelix Manlunas
This patch adds support to fetch fec stats from PHY. The stats are put in the shared data struct fwdata. A PHY driver indicates that it has FEC stats by setting the flag fwdata.phy.misc.has_fec_stats Besides CGX_CMD_GET_PHY_FEC_STATS, also add CGX_CMD_PRBS and CGX_CMD_DISPLAY_EYE to enum cgx_cmd_id so that Linux's enum list is in sync with firmware's enum list. Signed-off-by: Felix Manlunas <fmanlunas@marvell.com> Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: forward error correction configurationChristina Jacob
CGX block supports forward error correction modes baseR and RS. This patch adds support to set encoding mode and to read corrected/uncorrected block counters Adds new mailbox handlers set_fec to configure encoding modes and fec_stats to read counters and also increase mbox timeout to accomdate firmware command response timeout. Along with new CGX_CMD_SET_FEC command add other commands to sync with kernel enum list with firmware. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: octeontx2: Fix the confusion in buffer alloc failure pathKevin Hao
Pavel pointed that the return of dma_addr_t in otx2_alloc_rbuf/__otx2_alloc_rbuf() seem suspicious because a negative error code may be returned in some cases. For a dma_addr_t, the error code such as -ENOMEM does seem a valid value, so we can't judge if the buffer allocation fail or not based on that value. Add a parameter for otx2_alloc_rbuf/__otx2_alloc_rbuf() to store the dma address and make the return value to indicate if the buffer allocation really fail or not. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kevin Hao <haokexin@gmail.com> Tested-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10Merge branch 'Add-MBIM-over-MHI-support'David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add mbim protoLoic Poulain
MBIM has initially been specified by USB-IF for transporting data (IP) between a modem and a host over USB. However some modern modems also support MBIM over PCIe (via MHI). In the same way as QMAP(rmnet), it allows to aggregate IP packets and to perform context multiplexing. This change adds minimal MBIM data transport support to MHI, allowing to support MBIM only modems. MBIM being based on USB NCM, it reuses and copy some helpers/functions from the USB stack (cdc-ncm, cdc-mbim). Note that is a subset of the CDC-MBIM specification, supporting only transport of network data (IP), there is no support for DSS. Moreover the multi-session (for multi-pdn) is not supported in this initial version, but will be added latter, and aligned with the cdc-mbim solution (VLAN tags). This code has been inspired from the mhi_mbim downstream implementation (Carl Yin <carl.yin@quectel.com>). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add rx_length_errors statLoic Poulain
This can be used by proto when packet len is incorrect. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Create mhi.hLoic Poulain
Move mhi-net shared structures to mhi header, that will be used by upcoming proto(s). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add dedicated folderLoic Poulain
Create a dedicated mhi directory for mhi-net, mhi-net is going to be split into differente files (for additional protocol support). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: mhi: Add protocol supportLoic Poulain
MHI can transport different protocols, some are handled at upper level, like IP and QMAP(rmnet/netlink), but others will need to be inside MHI net driver, like mbim. This change adds support for protocol rx and tx_fixup callbacks registration, that can be used to encode/decode the targeted protocol. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net/sched: cls_flower: Reject invalid ct_state flags ruleswenxu
Reject the unsupported and invalid ct_state flags of cls flower rules. Fixes: e0ace68af2ac ("net/sched: cls_flower: Add matching on conntrack info") Signed-off-by: wenxu <wenxu@ucloud.cn> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10cxgb4: collect serial config version from registerRahul Lakkireddy
Collect serial config version information directly from an internal register, instead of explicitly resizing VPD. v2: - Add comments on info stored in PCIE_STATIC_SPARE2 register. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10i40e: remove the useless value assignment in i40e_clean_adminq_subtaskKaixu Xia
The variable ret is overwritten by the following call i40e_clean_arq_element() and the assignment is useless, so remove it. Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: VLAN field for flow directorPrzemyslaw Patynowski
Allow user to specify VLAN field and add it to flow director. Show VLAN field in "ethtool -n ethx" command. Handle VLAN type and tag field provided by ethtool command. Refactored filter addition, by replacing static arrays with runtime dummy packet creation, which allows specifying VLAN field. Previously, VLAN field was omitted. Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add flow director support for IPv6Przemyslaw Patynowski
Flow director for IPv6 is not supported. 1) Implementation of support for IPv6 flow director. 2) Added handlers for addition of TCP6, UDP6, SCTP6, IPv6. 3) Refactored legacy code to make it more generic. 4) Added packet templates for TCP6, UDP6, SCTP6, IPv6. 5) Added handling of IPv6 source and destination address for flow director. 6) Improved argument passing for source and destination portin TCP6, UDP6 and SCTP6. 7) Added handling of ethtool -n for IPv6, TCP6,UDP6, SCTP6. 8) Used correct bit flag regarding FLEXOFF field of flow director data descriptor. Without this patch, there would be no support for flow director on IPv6, TCP6, UDP6, SCTP6. Tested based on x710 datasheet by using: ethtool -N enp133s0f0 flow-type tcp4 src-port 13 dst-port 37 user-def 0x44142 action 1 ethtool -N enp133s0f0 flow-type tcp6 src-port 13 dst-port 40 user-def 0x44142 action 2 ethtool -N enp133s0f0 flow-type udp4 src-port 20 dst-port 40 user-def 0x44142 action 3 ethtool -N enp133s0f0 flow-type udp6 src-port 25 dst-port 40 user-def 0x44142 action 4 ethtool -N enp133s0f0 flow-type sctp4 src-port 55 dst-port 65 user-def 0x44142 action 5 ethtool -N enp133s0f0 flow-type sctp6 src-port 60 dst-port 40 user-def 0x44142 action 6 ethtool -N enp133s0f0 flow-type ip4 src-ip 1.1.1.1 dst-ip 1.1.1.4 user-def 0x44142 action 7 ethtool -N enp133s0f0 flow-type ip6 src-ip fe80::3efd:feff:fe6f:bbbb dst-ip fe80::3efd:feff:fe6f:aaaa user-def 0x44142 action 8 Then send traffic from client which matches the criteria provided to ethtool. Observe that packets are redirected to user set queues with ethtool -S <interface> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add EEE status getting & setting implementationAleksandr Loktionov
Implement Energy Efficient Ethernet (EEE) status getting & setting. The i40e_get_eee() requesting PHY EEE capabilities from firmware. The i40e_set_eee() function requests PHY EEE capabilities from firmware and sets PHY EEE advertising to full abilities or 0 depending whether EEE is to be enabled or disabled. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add netlink callbacks support for software based DCBArkadiusz Kubalewski
Add callbacks used by software based LLDP agent, which allows to configure DCB feature from userspace. Update copyright dates as appropriate. If LLDP agent is turned off in BIOS, or after setting private flag ("disable-fw-lldp on"). The driver initialized DCB functionality with default values, one traffic class with 100% bandwidth allocated. The new netlink callbacks are required for software LLDP agent, it must be able to acquire current DCB configuration of a network port and apply DCB configuration changes, if required. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add init and default config of software based DCBArkadiusz Kubalewski
Add extra handling on changing the "disable-fw-lldp" private flag to properly initialize software based DCB feature. Add default configuration of DCB functionality when Firmware LLDP agent is turned off, in case of driver probe and device reset on reconfiguration. Update copyright dates as appropriate. Software based DCB is a brand-new feature in i40e driver. Before, DCB was implemented by Firmware LLDP agent only. The agent was responsible for handling incoming DCB-related LLDP frames and applying received DCB configuration to hardware. Default configuration and new initialization flow for software based DCB is required. If LLDP agent is turned off in BIOS, or after setting private flag ("disable-fw-lldp on"). The driver initializes DCB functionality with default values, one traffic class with 100% bandwidth allocated. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: Add hardware configuration for software based DCBArkadiusz Kubalewski
Add registers and definitions required for applying DCB related hardware configuration. Add functions responsible for calculating and setting proper hardware configuration values for software based DCB functionality. Add function responsible for invoking Admin Queue command, which results in applying new DCB configuration to the hardware. Update copyright dates as appropriate. Software based DCB is a brand-new feature in i40e driver. Before, DCB was implemented by Firmware LLDP agent only. The agent was responsible for handling incoming DCB-related LLDP frames and applying received DCB configuration to hardware. New communication channel between software and hardware is required for software driver. It must be able to calculate and configure all the registers related for DCB feature. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2021-02-10x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init()Thomas Gleixner
Invoking x86_init.irqs.create_pci_msi_domain() before x86_init.pci.arch_init() breaks XEN PV. The XEN_PV specific pci.arch_init() function overrides the default create_pci_msi_domain() which is obviously too late. As a consequence the XEN PV PCI/MSI allocation goes through the native path which runs out of vectors and causes malfunction. Invoke it after x86_init.pci.arch_init(). Fixes: 6b15ffa07dc3 ("x86/irq: Initialize PCI/MSI domain at PCI init time") Reported-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87pn18djte.fsf@nanos.tec.linutronix.de
2021-02-10selftests/bpf: Simplify the calculation of variablesJiapeng Chong
Fix the following coccicheck warnings: ./tools/testing/selftests/bpf/xdpxceiver.c:954:28-30: WARNING !A || A && B is equivalent to !A || B. ./tools/testing/selftests/bpf/xdpxceiver.c:932:28-30: WARNING !A || A && B is equivalent to !A || B. ./tools/testing/selftests/bpf/xdpxceiver.c:909:28-30: WARNING !A || A && B is equivalent to !A || B. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1612860398-102839-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-02-10Merge tag 'pm-5.11-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Address a performance regression related to scale-invariance on x86 that may prevent turbo CPU frequencies from being used in certain workloads on systems using acpi-cpufreq as the CPU performance scaling driver and schedutil as the scaling governor" * tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there cpufreq: ACPI: Extend frequency tables to cover boost frequencies
2021-02-10Merge tag 'acpi-5.11-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Revert a problematic ACPICA commit that changed the code to attempt to update memory regions which may be read-only on some systems (Ard Biesheuvel)" * tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"
2021-02-10selftests/bpf: Fix endianness issues in atomic testsIlya Leoshkevich
Atomic tests store a DW, but then load it back as a W from the same address. This doesn't work on big-endian systems, and since the point of those tests is not testing narrow loads, fix simply by loading a DW. Fixes: 98d666d05a1d ("bpf: Add tests for new BPF atomic operations") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210210020713.77911-1-iii@linux.ibm.com
2021-02-10Merge tag 'dmaengine-fix2-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "Some late fixes for dmaengine: Core: - fix channel device_node deletion Driver fixes: - dw: revert of runtime pm enabling - idxd: device state fix, interrupt completion and list corruption - ti: resource leak * tag 'dmaengine-fix2-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine dw: Revert "dmaengine: dw: Enable runtime PM" dmaengine: idxd: check device state before issue command dmaengine: ti: k3-udma: Fix a resource leak in an error handling path dmaengine: move channel device_node deletion to driver dmaengine: idxd: fix misc interrupt completion dmaengine: idxd: Fix list corruption in description completion
2021-02-10Revert "io_uring: don't take fs for recvmsg/sendmsg"Jens Axboe
This reverts commit 10cad2c40dcb04bb46b2bf399e00ca5ea93d36b0. Petr reports that with this commit in place, io_uring fails the chroot test (CVE-202-29373). We do need to retain ->fs for send/recvmsg, so revert this commit. Reported-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Another pile of networing fixes: 1) ath9k build error fix from Arnd Bergmann 2) dma memory leak fix in mediatec driver from Lorenzo Bianconi. 3) bpf int3 kprobe fix from Alexei Starovoitov. 4) bpf stackmap integer overflow fix from Bui Quang Minh. 5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from Christoph Schemmel. 6) Don't update deleted entry in xt_recent netfilter module, from Jazsef Kadlecsik. 7) Use after free in nftables, fix from Pablo Neira Ayuso. 8) Header checksum fix in flowtable from Sven Auhagen. 9) Validate user controlled length in qrtr code, from Sabyrzhan Tasbolatov. 10) Fix race in xen/netback, from Juergen Gross, 11) New device ID in cxgb4, from Raju Rangoju. 12) Fix ring locking in rxrpc release call, from David Howells. 13) Don't return LAPB error codes from x25_open(), from Xie He. 14) Missing error returns in gsi_channel_setup() from Alex Elder. 15) Get skb_copy_and_csum_datagram working properly with odd segment sizes, from Willem de Bruijn. 16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean. 17) Do teardown on probe failure in DSA, from Vladimir Oltean. 18) Fix compilation failures of txtimestamp selftest, from Vadim Fedorenko. 19) Limit rx per-napi gro queue size to fix latency regression, from Eric Dumazet. 20) dpaa_eth xdp fixes from Camelia Groza. 21) Missing txq mode update when switching CBS off, in stmmac driver, from Mohammad Athari Bin Ismail. 22) Failover pending logic fix in ibmvnic driver, from Sukadev Bhattiprolu. 23) Null deref fix in vmw_vsock, from Norbert Slusarek. 24) Missing verdict update in xdp paths of ena driver, from Shay Agroskin. 25) seq_file iteration fix in sctp from Neil Brown. 26) bpf 32-bit src register truncation fix on div/mod, from Daniel Borkmann. 27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann. 28) Fix locking in vsock_shutdown(), from Stefano Garzarella. 29) Various missing index bound checks in hns3 driver, from Yufeng Mo. 30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from Vladimir Oltean. 31) Don't mix up stp and mrp port states in bridge layer, from Horatiu Vultur. 32) Fix locking during netif_tx_disable(), from Edwin Peer" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) bpf: Fix 32 bit src register truncation on div/mod bpf: Fix verifier jmp32 pruning decision logic bpf: Fix verifier jsgt branch analysis on max bound vsock: fix locking in vsock_shutdown() net: hns3: add a check for index in hclge_get_rss_key() net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx() net: hns3: add a check for queue_id in hclge_reset_vf_queue() net: dsa: felix: implement port flushing on .phylink_mac_link_down switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state net: watchdog: hold device global xmit lock during tx disable netfilter: nftables: relax check for stateful expressions in set definition netfilter: conntrack: skip identical origin tuple in same zone only vsock/virtio: update credit only if socket is not closed net: fix iteration for sctp transport seq_files net: ena: Update XDP verdict upon failure net/vmw_vsock: improve locking in vsock_connect_timeout() net/vmw_vsock: fix NULL pointer dereference ibmvnic: Clear failover_pending if unable to schedule net: stmmac: set TxQ mode back to DCB after disabling CBS ...
2021-02-10Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "14 patches. Subsystems affected by this patch series: mm (kasan, mremap, tmpfs, selftests, memcg, and slub), MAINTAINERS, squashfs, nilfs2, and firmware" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: nilfs2: make splice write available again mm, slub: better heuristic for number of cpus when calculating slab order Revert "mm: memcontrol: avoid workload stalls when lowering memory.high" MAINTAINERS: update Andrey Ryabinin's email address selftests/vm: rename file run_vmtests to run_vmtests.sh tmpfs: disallow CONFIG_TMPFS_INODE64 on alpha tmpfs: disallow CONFIG_TMPFS_INODE64 on s390 mm/mremap: fix BUILD_BUG_ON() error in get_extent firmware_loader: align .builtin_fw to 8 kasan: fix stack traces dependency for HW_TAGS squashfs: add more sanity checks in xattr id lookup squashfs: add more sanity checks in inode lookup squashfs: add more sanity checks in id lookup squashfs: avoid out of bounds writes in decompressors
2021-02-10nilfs2: make splice write available againJoachim Henke
Since 5.10, splice() or sendfile() to NILFS2 return EINVAL. This was caused by commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops"). This patch initializes the splice_write field in file_operations, like most file systems do, to restore the functionality. Link: https://lkml.kernel.org/r/1612784101-14353-1-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Joachim Henke <joachim.henke@t-systems.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> [5.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-10mm, slub: better heuristic for number of cpus when calculating slab orderVlastimil Babka
When creating a new kmem cache, SLUB determines how large the slab pages will based on number of inputs, including the number of CPUs in the system. Larger slab pages mean that more objects can be allocated/free from per-cpu slabs before accessing shared structures, but also potentially more memory can be wasted due to low slab usage and fragmentation. The rough idea of using number of CPUs is that larger systems will be more likely to benefit from reduced contention, and also should have enough memory to spare. Number of CPUs used to be determined as nr_cpu_ids, which is number of possible cpus, but on some systems many will never be onlined, thus commit 045ab8c9487b ("mm/slub: let number of online CPUs determine the slub page order") changed it to nr_online_cpus(). However, for kmem caches created early before CPUs are onlined, this may lead to permamently low slab page sizes. Vincent reports a regression [1] of hackbench on arm64 systems: "I'm facing significant performances regression on a large arm64 server system (224 CPUs). Regressions is also present on small arm64 system (8 CPUs) but in a far smaller order of magnitude On 224 CPUs system : 9 iterations of hackbench -l 16000 -g 16 v5.11-rc4 : 9.135sec (+/- 0.45%) v5.11-rc4 + revert this patch: 3.173sec (+/- 0.48%) v5.10: 3.136sec (+/- 0.40%)" Mel reports a regression [2] of hackbench on x86_64, with lockstat suggesting page allocator contention: "i.e. the patch incurs a 7% to 32% performance penalty. This bisected cleanly yesterday when I was looking for the regression and then found the thread. Numerous caches change size. For example, kmalloc-512 goes from order-0 (vanilla) to order-2 with the revert. So mostly this is down to the number of times SLUB calls into the page allocator which only caches order-0 pages on a per-cpu basis" Clearly num_online_cpus() doesn't work too early in bootup. We could change the order dynamically in a memory hotplug callback, but runtime order changing for existing kmem caches has been already shown as dangerous, and removed in 32a6f409b693 ("mm, slub: remove runtime allocation order changes"). It could be resurrected in a safe manner with some effort, but to fix the regression we need something simpler. We could use num_present_cpus() that should be the number of physically present CPUs even before they are onlined. That would work for PowerPC [3], which triggered the original commit, but that still doesn't work on arm64 [4] as explained in [5]. So this patch tries to determine the best available value without specific arch knowledge. - num_present_cpus() if the number is larger than 1, as that means the arch is likely setting it properly - nr_cpu_ids otherwise This should fix the reported regressions while also keeping the effect of 045ab8c9487b for PowerPC systems. It's possible there are configurations where num_present_cpus() is 1 during boot while nr_cpu_ids is at the same time bloated, so these (if they exist) would keep the large orders based on nr_cpu_ids as was before 045ab8c9487b. [1] https://lore.kernel.org/linux-mm/CAKfTPtA_JgMf_+zdFbcb_V9rM7JBWNPjAz9irgwFj7Rou=xzZg@mail.gmail.com/ [2] https://lore.kernel.org/linux-mm/20210128134512.GF3592@techsingularity.net/ [3] https://lore.kernel.org/linux-mm/20210123051607.GC2587010@in.ibm.com/ [4] https://lore.kernel.org/linux-mm/CAKfTPtAjyVmS5VYvU6DBxg4-JEo5bdmWbngf-03YsY18cmWv_g@mail.gmail.com/ [5] https://lore.kernel.org/linux-mm/20210126230305.GD30941@willie-the-truck/ Link: https://lkml.kernel.org/r/20210208134108.22286-1-vbabka@suse.cz Fixes: 045ab8c9487b ("mm/slub: let number of online CPUs determine the slub page order") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Vincent Guittot <vincent.guittot@linaro.org> Reported-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Mel Gorman <mgorman@techsingularity.net> Tested-by: Vincent Guittot <vincent.guittot@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-10Merge branch 'allow variable-offset stack acces'Alexei Starovoitov
Andrei Matei says: ==================== Before this patch, variable offset access to the stack was dissalowed for regular instructions, but was allowed for "indirect" accesses (i.e. helpers). This patch removes the restriction, allowing reading and writing to the stack through stack pointers with variable offsets. This makes stack-allocated buffers more usable in programs, and brings stack pointers closer to other types of pointers. The motivation is being able to use stack-allocated buffers for data manipulation. When the stack size limit is sufficient, allocating buffers on the stack is simpler than per-cpu arrays, or other alternatives. V2 -> V3 - var-offset writes mark all the stack slots in range as initialized, so that future reads are not rejected. - rewrote the C test to not use uprobes, as per Andrii's suggestion. - addressed other review comments from Alexei. V1 -> V2 - add support for var-offset stack writes, in addition to reads - add a C test - made variable offset direct reads no longer destroy spilled registers in the access range - address review nits ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-02-10selftest/bpf: Add test for var-offset stack accessAndrei Matei
Add a higher-level test (C BPF program) for the new functionality - variable access stack reads and writes. Signed-off-by: Andrei Matei <andreimatei1@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210207011027.676572-5-andreimatei1@gmail.com
2021-02-10selftest/bpf: Verifier tests for var-off accessAndrei Matei
Add tests for the new functionality - reading and writing to the stack through a variable-offset pointer. Signed-off-by: Andrei Matei <andreimatei1@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210207011027.676572-4-andreimatei1@gmail.com
2021-02-10selftest/bpf: Adjust expected verifier errorsAndrei Matei
The verifier errors around stack accesses have changed slightly in the previous commit (generally for the better). Signed-off-by: Andrei Matei <andreimatei1@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210207011027.676572-3-andreimatei1@gmail.com
2021-02-10bpf: Allow variable-offset stack accessAndrei Matei
Before this patch, variable offset access to the stack was dissalowed for regular instructions, but was allowed for "indirect" accesses (i.e. helpers). This patch removes the restriction, allowing reading and writing to the stack through stack pointers with variable offsets. This makes stack-allocated buffers more usable in programs, and brings stack pointers closer to other types of pointers. The motivation is being able to use stack-allocated buffers for data manipulation. When the stack size limit is sufficient, allocating buffers on the stack is simpler than per-cpu arrays, or other alternatives. In unpriviledged programs, variable-offset reads and writes are disallowed (they were already disallowed for the indirect access case) because the speculative execution checking code doesn't support them. Additionally, when writing through a variable-offset stack pointer, if any pointers are in the accessible range, there's possilibities of later leaking pointers because the write cannot be tracked precisely. Writes with variable offset mark the whole range as initialized, even though we don't know which stack slots are actually written. This is in order to not reject future reads to these slots. Note that this doesn't affect writes done through helpers; like before, helpers need the whole stack range to be initialized to begin with. All the stack slots are in range are considered scalars after the write; variable-offset register spills are not tracked. For reads, all the stack slots in the variable range needs to be initialized (but see above about what writes do), otherwise the read is rejected. All register spilled in stack slots that might be read are marked as having been read, however reads through such pointers don't do register filling; the target register will always be either a scalar or a constant zero. Signed-off-by: Andrei Matei <andreimatei1@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210207011027.676572-2-andreimatei1@gmail.com
2021-02-10staging: rtl8723bs: remove blank line from include/autoconf.hPhillip Potter
Remove additional blank line from include/autoconf.h, fixes one checkpatch check notice. Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20210210170024.100937-1-phil@philpotter.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10x86/{fault,efi}: Fix and rename efi_recover_from_page_fault()Andy Lutomirski
efi_recover_from_page_fault() doesn't recover -- it does a special EFI mini-oops. Rename it to make it clear that it crashes. While renaming it, I noticed a blatant bug: a page fault oops in a different thread happening concurrently with an EFI runtime service call would be misinterpreted as an EFI page fault. Fix that. This isn't quite exact. The situation could be improved by using a special CS for calls into EFI. [ bp: Massage commit message and simplify in interrupt check. ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/f43b1e80830dc78ed60ed8b0826f4f189254570c.1612924255.git.luto@kernel.org
2021-02-11arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driverNobuhiro Iwamatsu
Add the GPIO node in Toshiba Visconti5 SoC-specific DT file. And enable the GPIO node in TMPV7708 RM main board's board-specific DT file. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10x86/fault: Don't run fixups for SMAP violationsAndy Lutomirski
A SMAP-violating kernel access is not a recoverable condition. Imagine kernel code that, outside of a uaccess region, dereferences a pointer to the user range by accident. If SMAP is on, this will reliably generate as an intentional user access. This makes it easy for bugs to be overlooked if code is inadequately tested both with and without SMAP. This was discovered because BPF can generate invalid accesses to user memory, but those warnings only got printed if SMAP was off. Make it so that this type of error will be discovered with SMAP on as well. [ bp: Massage commit message. ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/66a02343624b1ff46f02a838c497fc05c1a871b3.1612924255.git.luto@kernel.org
2021-02-10usb: quirks: add quirk to start video capture on ELMO L-12F document camera ↵Stefan Ursella
reliable Without this quirk starting a video capture from the device often fails with kernel: uvcvideo: Failed to set UVC probe control : -110 (exp. 34). Signed-off-by: Stefan Ursella <stefan.ursella@wolfvision.net> Link: https://lore.kernel.org/r/20210210140713.18711-1-stefan.ursella@wolfvision.net Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10Merge tag 'usb-serial-5.12-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.12-rc1 Here are the USB-serial updates for 5.12-rc1, including: - a line-speed fix for newer pl2303 devices - a line-speed fix for FTDI FT-X devices - a new xr_serial driver for MaxLinear/Exar devices (non-ACM mode) - a cdc-acm blacklist entry for when the xr_serial driver is enabled - cp210x support for software flow control - various cp210x modem-control fixes - an updated ZTE P685M modem entry to stop claiming the QMI interface - an update to drop the port_remove() driver-callback return value Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (41 commits) USB: serial: drop bogus to_usb_serial_port() checks USB: serial: make remove callback return void USB: serial: drop if with an always false condition USB: serial: option: update interface mapping for ZTE P685M USB: serial: ftdi_sio: restore divisor-encoding comments USB: serial: ftdi_sio: fix FTX sub-integer prescaler USB: serial: cp210x: clean up auto-RTS handling USB: serial: cp210x: fix RTS handling USB: serial: cp210x: clean up printk zero padding USB: serial: cp210x: clean up flow-control debug message USB: serial: cp210x: drop shift macros USB: serial: cp210x: fix modem-control handling USB: serial: cp210x: suppress modem-control errors USB: serial: mos7720: fix error code in mos7720_write() USB: serial: xr: fix B0 handling USB: serial: xr: fix pin configuration USB: serial: xr: fix gpio-mode handling USB: serial: xr: simplify line-speed logic USB: serial: xr: clean up line-settings handling USB: serial: xr: document vendor-request recipient ...
2021-02-10gpio: ep93xx: Fix single irqchip with multi gpiochipsNikita Shubin
Fixes the following warnings which results in interrupts disabled on port B/F: gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver. - added separate irqchip for each interrupt capable gpiochip - provided unique names for each irqchip Fixes: d2b091961510 ("gpio: ep93xx: Pass irqchip when adding gpiochip") Cc: <stable@vger.kernel.org> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10gpio: ep93xx: fix BUG_ON port F usageNikita Shubin
Two index spaces and ep93xx_gpio_port are confusing. Instead add a separate struct to store necessary data and remove ep93xx_gpio_port. - add struct to store IRQ related data for each IRQ capable chip - replace offset array with defined offsets - add IRQ registers offset for each IRQ capable chip into ep93xx_gpio_banks ------------[ cut here ]------------ kernel BUG at drivers/gpio/gpio-ep93xx.c:64! ---[ end trace 3f6544e133e9f5ae ]--- Fixes: fd935fc421e74 ("gpio: ep93xx: Do not pingpong irq numbers") Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-10x86/fault: Don't look for extable entries for SMEP violationsAndy Lutomirski
If the kernel gets a SMEP violation or a fault that would have been a SMEP violation if it had SMEP support, it shouldn't run fixups. Just OOPS. [ bp: Massage commit message. ] Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/46160d8babce2abf1d6daa052146002efa24ac56.1612924255.git.luto@kernel.org
2021-02-10x86/fault: Rename no_context() to kernelmode_fixup_or_oops()Andy Lutomirski
The name no_context() has never been very clear. It's only called for faults from kernel mode, so rename it and change the no-longer-useful user_mode(regs) check to a WARN_ON_ONCE. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/c21940efe676024bb4bc721f7d70c29c420e127e.1612924255.git.luto@kernel.org
2021-02-10x86/fault: Bypass no_context() for implicit kernel faults from usermodeAndy Lutomirski
Drop an indentation level and remove the last user_mode(regs) == true caller of no_context() by directly OOPSing for implicit kernel faults from usermode. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/6e3d1129494a8de1e59d28012286e3a292a2296e.1612924255.git.luto@kernel.org
2021-02-10x86/fault: Split the OOPS code out from no_context()Andy Lutomirski
Not all callers of no_context() want to run exception fixups. Separate the OOPS code out from the fixup code in no_context(). Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/450f8d8eabafb83a5df349108c8e5ea83a2f939d.1612924255.git.luto@kernel.org
generated by cgit (git 2.34.1) at 2025-09-22 17:18:01 +0000