| Age | Commit message (Collapse) | Author |
|---|
|
This driver has correctly mapped jack kcontrols for Headphone and
Headset Mic. However, it is also mapping Line Out jack detection events
to the Headphone kcontrol.
The WM5100 codec used here can distinguish Line Out connections from
Headphone connections. Decouple the two, expose Line Out to userspace as
an independent kcontrol and add the necessary widget.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-27-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The WM8958 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-26-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here supports detecting Headphone and Headset Mic connections. Expose
both to userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-25-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit d0508b4f1604 ("ASoC: rk3399_gru_sound: Add DAPM pins, kcontrols
for jack detection") maps kcontrols for Headphones and Headset Mic jacks
for this driver so that PulseAudio and PipeWire can handle insertion
events for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widget.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-24-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5663 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-23-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682 and
RT5682s codecs used here can detect Headphone and Headset Mic
connections. Expose each to userspace as a kcontrol.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-22-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682 and
RT5682s codecs used here can detect Headphone and Headset Mic
connections. Expose each to userspace as a kcontrol.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-21-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. It seems to support
detecting Headphone and Headset Mic connections. Expose each to
userspace as a kcontrol and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-20-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 8e9867486806 ("ASoC: mediatek: mt8186-da7219: Expose individual
headset jack pins") maps kcontrols for Headphone and Headset Mic jacks
for this driver so that PulseAudio and PipeWire can handle jack
detection events for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-19-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The TS3A227 component
used here can detect Headphones and Headset Mic connections. Expose each
to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-18-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-17-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose both to
userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-16-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose both to
userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-15-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose each to
userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-14-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver has correctly mapped jack kcontrols for Headphone and
Headset Mic. However, it is configuring the jack to only care about
Headphone events. The MAX98090 codec used here can detect both
connections, so configure the jack as such.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-13-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. It seems to have a
single detection GPIO pin used to report everything as a Headset. But it
has widgets for Headphone and Mic Jack, so expose both to userspace as
kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-12-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 2913bb1f6830 ("ASoC: Intel: sof_da7219_max98373: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-11-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit b9f53b9fc14e ("ASoC: Intel: kbl_da7219_max98927: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-10-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit c2065d43ae85 ("ASoC: Intel: kbl_da7219_max98357a: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-9-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit ecd77d494ec9 ("ASoC: Intel: bytcr_wm5102: Add jack detect
support") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle jack detection events
for these peripherals.
The WM5102 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-8-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit bbdd4ea2190b4 ("ASoC: Intel: bxt_da7219_max98357a: remap jack
pins") maps kcontrols for Headphone and Headset Mic jacks for this
driver so that PulseAudio and PipeWire can handle detection events for
these peripherals.
The DA7219 codec used here can also distinguish between Headphone and
Line Out connections that go into the same physical port. Expose the
latter to userspace as a kcontrol as well and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-7-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-6-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682, RT1015
and RT1015p codecs used here can detect Headphone and Headset Mic
connections. Expose the former two to userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-5-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5682, RT5682s,
NAU8825 and NAU8821 codecs used here can detect Headphone and Headset
Mic connections. Expose both to userspace as kcontrols and add the
necessary widgets. Split the jack and pin structs per-codec to
accommodate for per-codec differences.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-4-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The RT5645 codec used
here can detect Headphone and Headset Mic connections. Expose both to
userspace as kcontrols.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-3-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver does not properly map jack pins to kcontrols that PulseAudio
and PipeWire need to handle jack detection events. The DA7219 codec used
here can detect Headphones, Headset Mic and Line Out connections. Expose
each to userspace as kcontrols and add the necessary widgets.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230802175737.263412-2-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
The changes are directly inspired by RT711 and RT711-sdca changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In stress cases involving module insertion/removal followed by
playback/capture, it can happen that capture/playback is started
before the codec enumeration completes.
The codec driver registers its components with the ASoC framework
during the probe stage, so there is currently no way for the card
creation to wait for the codec enumeration/initialization to complete.
In addition, when the capture/playback starts, the ASoC framework uses
pm_runtime_get_sync() to properly refcount and power-manage
devices. This is problematic in the SoundWire case because pm_runtime
is enabled during the enumeration/initialization stage, so
pm_runtime_get_sync() will return -EACCESS which is
ignored. Additional errors will happen when setting the pm_runtime
status as 'active' because the parent is not properly resumed,
resulting in an error such as:
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch suggests enabling pm_runtime during the probe, but marking
the device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In stress cases involving module insertion/removal followed by
playback/capture, it can happen that capture/playback is started
before the codec enumeration completes.
The codec driver registers its components with the ASoC framework
during the probe stage, so there is currently no way for the card
creation to wait for the codec enumeration/initialization to complete.
In addition, when the capture/playback starts, the ASoC framework uses
pm_runtime_get_sync() to properly refcount and power-manage
devices. This is problematic in the SoundWire case because pm_runtime
is enabled during the enumeration/initialization stage, so
pm_runtime_get_sync() will return -EACCESS which is
ignored. Additional errors will happen when setting the pm_runtime
status as 'active' because the parent is not properly resumed,
resulting in an error such as:
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch suggests enabling pm_runtime during the probe, but marking
the device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The RT5682 needs specific attention: there are two regmap in
rt5682_priv struct, one is sdw_regmap which is for IO transfer, and
the other is used for registers control.
We need to set both regmaps when we set cache only. Because if we set
rt5682->sdw_regmap only, rt5682->regmap won't set/get the right value
when it call regmap_write/read(rt5682->sdw_regmap, ...). If we set
rt5682->regmap only, regmap_write(rt5682->sdw_regmap, ...) is used
in rt5682_clock_config which will be called by the ..bus_config ops.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SoundWire bus may start after the probe where the SoundWire ASoC
components are registered. This creates a time window where the card
can be created and the registers be accessed.
As discussed on the mailing list, we can't really control when codecs
are enumerated and initialized, but we can make sure the access to the
codecs is cached until the hardware is accessible.
This patch configures regcache_cache_only() with a 'true' parameter in
the probe function, and a 'false' parameter in the io_init routine.
The rt5682 is handled through a different patch due to its specific
cache handling.
Link: https://lore.kernel.org/alsa-devel/20230503144102.242240-1-krzysztof.kozlowski@linaro.org/
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For some reason the first batch of SoundWire codec drivers squelch
errors in the SoundWire probe callback.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver forgets to call regulator_bulk_disable()
Add the missed call to fix it.
Fixes: 33ada14a26c8 ("ASoC: add rt5665 codec driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_A560D01E3E0A00A85A12F137E4B5205B3508@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The init/exit() of driver only calls platform_driver_register/unregister,
it can be simpilfied with module_platform_driver.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230804085402.1328033-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
WM8960 has the following power supplies:
- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD1
Add support for them.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803215506.142922-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
WM8960 has the following power supplies:
- AVDD
- DBVDD
- DCVDD
- SPKVDD1
- SPKVDD1
Add them to bindings to improve the hardware description.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803215506.142922-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To prevent incorrect access between the host and DSP sides, we need to
modify DRAM as a non-cache memory type. Additionally, we can retrieve
the size of shared DMA from the device tree.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Reviewed-by: Kuan-Hsun Cheng <Allen-KH.Cheng@mediatek.com>
Link: https://lore.kernel.org/r/20230803075028.32170-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
max98363_io_init needs to keep going when we read revision ID
successfully.
Fixes: 18c0af945fa3 ("ASoC: max98363: add soundwire amplifier driver")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230804034734.3848227-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Expand the HDA/I915 connectivity check to correctly handle
the PCI topology used in some Intel Arrow Lake products.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: "T, Arun" <arun.t@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
One more PCI ID for the road.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
