| Age | Commit message (Collapse) | Author |
|---|
|
No point in duplicating the functionality just use the generic helper
that has the same semantics.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is small error in comment about BTRFS_ORDERED_* flags, added in
commit 3c198fe06449 ("btrfs: rework the order of
btrfs_ordered_extent::flags") but the fixup did not get merged in time.
The 4 types are for ordered extent itself, not for direct io.
Only 3 types support direct io, REGULAR/NOCOW/PREALLOC.
Fix the comment to reflect that.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
<patrice.chotard@foss.st.com>
Patrice Chotard <patrice.chotard@foss.st.com>:
From: Patrice Chotard <patrice.chotard@foss.st.com>
Christophe Kerello (1):
spi: stm32-qspi: fix pm_runtime usage_count counter
Patrice Chotard (2):
spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transfer
spi: stm32-qspi: Add dirmap support
drivers/spi/spi-stm32-qspi.c | 106 +++++++++++++++++++++++++++--------
1 file changed, 84 insertions(+), 22 deletions(-)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm DTS updates for 5.13
This adds CPUfreq, interconnect providers, IPC, remoteproc and IPA to
the SDX55 platform and then adds board files for the Telit FN980 TLB and
Thundercomm TurboX T55.
* tag 'qcom-dts-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: sdx55: add IPA information
ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55
dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB
dt-bindings: arm: qcom: Add binding for Telit FN980 TLB board
ARM: dts: qcom: sdx55: Add Modem remoteproc node
ARM: dts: qcom: Fix node name for NAND controller node
ARM: dts: qcom: sdx55: Add interconnect nodes
ARM: dts: qcom: sdx55: Add SCM node
dt-bindings: firmware: scm: Add compatible for SDX55
ARM: dts: qcom: sdx55: Add IMEM and PIL info region
ARM: dts: qcom: sdx55: Add modem SMP2P node
ARM: dts: qcom: sdx55: Add CPUFreq support
ARM: dts: qcom: sdx55: Add support for APCS block
ARM: dts: qcom: sdx55: Add support for A7 PLL clock
Link: https://lore.kernel.org/r/20210419150956.860423-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Update iommu property in lpass cpu node for supporting
simultaneous playback on headset and speaker.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20210406163330.11996-1-srivasam@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Match what's downstream for this board.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Cc: Ajit Pandey <ajitp@codeaurora.org>
Cc: Judy Hsiao <judyhsiao@chromium.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210315133924.v2.2.If218189eff613a6c48ba12d75fad992377d8f181@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This was present downstream. Add upstream too. NOTE: upstream I
managed to get some sort of halfway state and got one pinctrl entry in
the coachz-r1 device tree. Remove that as part of this since it's now
in the dtsi.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Cc: Ajit Pandey <ajitp@codeaurora.org>
Cc: Judy Hsiao <judyhsiao@chromium.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210315133924.v2.1.I601a051cad7cfd0923e55b69ef7e5748910a6096@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
M5Stack are releasing a new widget based on the
SigmaStar SSD202D. We have some support for the
SSD202D so lets add a dts for it.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://m5stack-store.myshopify.com/products/unitv2-ai-camera-gc2145
Link: https://lore.kernel.org/r/20210417011015.2105280-4-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a compatible for the M5Stack UnitV2 that is based on the
SigmaStar SSD202D (inifinity2m).
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20210417011015.2105280-3-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
M5Stack make various modules for STEM, Makers, IoT.
Their UnitV2 is based on a SigmaStar SSD202D SoC which
we already have some minimal support for so add a
prefix in preparation for UnitV2 board support.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://m5stack.com/
Link: https://lore.kernel.org/r/20210417011015.2105280-2-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix unit names to make dtbs_check happy.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210414144643.17435-2-matthias.bgg@kernel.org
Link: https://lore.kernel.org/r/20210416143923.23406-3-matthias.bgg@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix unit names to make dtbs_check happy.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210414144643.17435-1-matthias.bgg@kernel.org
Link: https://lore.kernel.org/r/20210416143923.23406-2-matthias.bgg@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.13, part two
1. Renesas RPC: fix possible NULL pointer.
2. Exynos5422 DMC: add proper error checking for clk_prepare.
3. Mediatek SMI: use device-links instead of explicit PM runtime calls.
* tag 'memory-controller-drv-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
Link: https://lore.kernel.org/r/20210415065514.7385-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If the setup callback failed, but the controller has auto_runtime_pm
and set_cs, the setup failure could be missed.
Signed-off-by: Joe Burmeister <joe.burmeister@devtank.co.uk>
Link: https://lore.kernel.org/r/20210419130631.4586-1-joe.burmeister@devtank.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When initially probing the SPI slave device, the call for disabling an
SPI device without the SPI_CS_HIGH flag is not applied, as the
condition for checking whether or not the state to be applied equals the
one currently set evaluates to true.
This however might not necessarily be the case, as the chipselect might
be active.
Add a force flag to spi_set_cs which allows to override this
early exit condition. Set it to false everywhere except when called
from spi_setup to sync up the initial CS state.
Fixes commit d40f0b6f2e21 ("spi: Avoid setting the chip select if we don't
need to")
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://lore.kernel.org/r/20210416195956.121811-1-mail@david-bauer.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add stm32_qspi_dirmap_read() and stm32_qspi_dirmap_create()
to get dirmap support.
Update the exec_op callback which doens't allow anymore memory map
access. Memory map access are only available through the dirmap_read
callback.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20210419121541.11617-4-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to optimize accesses to spi flashes, trigger a DMA only
if more than 4 bytes has to be transferred.
DMA transfer preparation's cost becomes negligible above 4 bytes to
transfer. Below this threshold, indirect transfer give more throughput.
mtd_speedtest shows that page write throughtput increases :
- from 779 to 853 KiB/s (~9.5%) with s25fl512s SPI-NOR.
- from 5283 to 5666 KiB/s (~7.25%) with Micron SPI-NAND.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20210419121541.11617-3-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pm_runtime usage_count counter is not well managed.
pm_runtime_put_autosuspend callback drops the usage_counter but this
one has never been increased. Add pm_runtime_get_sync callback to bump up
the usage counter. It is also needed to use pm_runtime_force_suspend and
pm_runtime_force_resume APIs to handle properly the clock.
Fixes: 9d282c17b023 ("spi: stm32-qspi: Add pm_runtime support")
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210419121541.11617-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix a regression caused by making the 486SX separately selectable in
Kconfig, for which the HIGHMEM64G setting has not been updated and
therefore has become exposed as a user-selectable option for the M486SX
configuration setting unlike with original M486 and all the other
settings that choose non-PAE-enabled processors:
High Memory Support
> 1. off (NOHIGHMEM)
2. 4GB (HIGHMEM4G)
3. 64GB (HIGHMEM64G)
choice[1-3?]:
With the fix in place the setting is now correctly removed:
High Memory Support
> 1. off (NOHIGHMEM)
2. 4GB (HIGHMEM4G)
choice[1-2?]:
[ bp: Massage commit message. ]
Fixes: 87d6021b8143 ("x86/math-emu: Limit MATH_EMULATION to 486SX compatibles")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # v5.5+
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.2104141221340.44318@angie.orcam.me.uk
|
|
Fix the following coccicheck warning:
./arch/m68k/include/asm/sun3xflop.h:109:2-3: Unneeded semicolon
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20210415031450.23379-1-wanjiabing@vivo.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Add touchscreen info for the Teclast Tbook 11 tablet. This includes info
for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.
This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210417173105.4134-1-hdegoede@redhat.com
|
|
Alder PCH-P is based on Tiger Lake PCH.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-10-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Just like Ice Lake, Tiger Lake uses Cannon Lake's LTR information
and supports a few additional registers. Hence add the LTR registers
specific to Tiger Lake to the cnp_ltr_show_map[].
Also adjust the number of LTR IPs for Tiger Lake to the correct amount.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-9-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
By default the Low Power Mode (LPM or sub-state) status registers will
latch condition status on every entry into Package C10. This is
configurable in the PMC to allow latching on any achievable sub-state. Add
a debugfs file to support this.
Also add the option to clear the status registers to 0. Clearing the status
registers before testing removes ambiguity around when the current values
were set.
The new file, latch_lpm_mode, looks like this:
[c10] S0i2.0 S0i3.0 S0i2.1 S0i3.1 S0i3.2 clear
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-8-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the debugfs file, substate_requirements, to view the low power mode
(LPM) requirements for each enabled mode alongside the last latched status
of the condition.
After this patch, the new file will look like this:
Element | S0i2.0 | S0i3.0 | S0i2.1 | S0i3.1 | S0i3.2 | Status |
USB2PLL_OFF_STS | Required | Required | Required | Required | Required | |
PCIe/USB3.1_Gen2PLL_OFF_STS | Required | Required | Required | Required | Required | |
PCIe_Gen3PLL_OFF_STS | Required | Required | Required | Required | Required | Yes |
OPIOPLL_OFF_STS | Required | Required | Required | Required | Required | Yes |
OCPLL_OFF_STS | Required | Required | Required | Required | Required | Yes |
MainPLL_OFF_STS | | Required | | Required | Required | |
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Co-developed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-7-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Platforms that support low power modes (LPM) such as Tiger Lake maintain
requirements for each sub-state that a readable in the PMC. However, unlike
LPM status registers, requirement registers are not memory mapped but are
available from an ACPI _DSM. Collect the requirements for Tiger Lake using
the _DSM method and store in a buffer.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Co-developed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-6-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Modify the low power mode (LPM or sub-state) residency counters to display
in microseconds just like the slp_s0_residency counter. The granularity of
the counter is approximately 30.5us per tick. Double this value then divide
by two to maintain accuracy.
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-5-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The current implementation of pmc_core_substate_res_show() is written
specifically for Tiger Lake. However, new platform will also have
sub-states and may support different modes. Therefore rewrite the code to
handle sub-states generically.
Obtain the number and type of enabled states form the PMC. Use the Low
Power Mode (LPM) priority register to store the states in order from
shallowest to deepest for displays. Add a for_each macro to simplify
this. While changing the sub-state display it makes sense to show only the
"enabled" sub-states instead of showing all possible ones. After this
patch, the debugfs file looks like this:
Substate Residency
S0i2.0 0
S0i3.0 0
S0i2.1 9329279
S0i3.1 0
S0i3.2 0
Suggested-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-4-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The intel_pmc_core driver did not always bind to a device which meant it
lacked a struct device that could be used to maintain driver data. So a
global instance of struct pmc_dev was used for this purpose and functions
accessed this directly. Since the driver now binds to an ACPI device,
remove the global pmc_dev in favor of one that is allocated during probe.
Modify users of the global to obtain the object by argument instead.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-3-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The DMI callbacks, used for quirks, currently access the PMC by getting
the address a global pmc_dev struct. Instead, have the callbacks set a
global quirk specific variable. In probe, after calling dmi_check_system(),
pass pmc_dev to a function that will handle each quirk if its variable
condition is met. This allows removing the global pmc_dev later.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210417031252.3020837-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
alignment in block mode
Since commit e085b51c74cc ("mmc: meson-gx: check for scatterlist size alignment in block mode"),
support for SDIO SD_IO_RW_EXTENDED transferts are properly filtered but some driver
like brcmfmac still gives a block sg buffer size not aligned with SDIO block,
triggerring a WARN_ONCE() with scary stacktrace even if the transfer works fine
but with possible degraded performances.
Simply replace with dev_warn_once() to inform user this should be fixed to avoid
degraded performance.
This should be ultimately fixed in brcmfmac, but since it's only a performance issue
the warning should be removed.
Fixes: e085b51c74cc ("mmc: meson-gx: check for scatterlist size alignment in block mode")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210416094347.2015896-1-narmstrong@baylibre.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another smaller set of fixes for three of the Arm platforms:
TI OMAP:
Fix swapped mmc device order also for omap3 that got changed with
the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the
aliases should be board specific, all the mmc device instances are
all there in the SoC, and we do probe them by default so that PM
runtime can idle the devices if left enabled from the bootloader.
Qualcomm Snapdragon:
This bypasses the recently introduced interconnect handling in
the GENI (serial engine) driver when running off ACPI, as this
causes the GENI probe to fail and the Lenovo Yoga C630 to boot
without keyboard and touchpad.
Allwinner:
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the
SoPine, some MAINTAINERS maintainance, and a clk / reset switch to
our headers"
* tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
MAINTAINERS: Match on allwinner keyword
MAINTAINERS: Add our new mailing-list
arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
ARM: OMAP2+: Fix uninitialized sr_inst
ARM: dts: Fix swapped mmc order for omap3
ARM: OMAP2+: Fix warning for omap_init_time_of()
soc: qcom: geni: shield geni_icc_get() for ACPI boot
|
|
Pull ARM fixes from Russell King:
- Halve maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled
- Fix conversion for_each_membock() to for_each_mem_range()
- Fix footbridge PCI mapping
- Avoid uprobes hooking on thumb instructions
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9071/1: uprobes: Don't hook on thumb instructions
ARM: footbridge: fix PCI interrupt mapping
ARM: 9069/1: NOMMU: Fix conversion for_each_membock() to for_each_mem_range()
ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled
|
|
Since uprobes is not supported for thumb, check that the thumb bit is
not set when matching the uprobes instruction hooks.
The Arm UDF instructions used for uprobes triggering
(UPROBE_SWBP_ARM_INSN and UPROBE_SS_ARM_INSN) coincidentally share the
same encoding as a pair of unallocated 32-bit thumb instructions (not
UDF) when the condition code is 0b1111 (0xf). This in effect makes it
possible to trigger the uprobes functionality from thumb, and at that
using two unallocated instructions which are not permanently undefined.
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Cc: stable@vger.kernel.org
Fixes: c7edc9e326d5 ("ARM: add uprobes support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
offline
Check that enough time has passed such that the modify channel message
has been processed before taking a CPU offline.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210416143449.16185-4-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
CHANNELMSG_MODIFYCHANNEL_RESPONSE
Introduce the CHANNELMSG_MODIFYCHANNEL_RESPONSE message type, and code
to receive and process such a message.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210416143449.16185-3-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Hyper-V has added VMBus protocol version 5.3. Allow Linux guests to
negotiate the new version on version of Hyper-V that support it.
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20210416143449.16185-2-parri.andrea@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two fixes: the libsas fix is for a problem that occurs when trying to
change the cache type of an ATA device and the libiscsi one is a
regression fix from this merge window"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Reset num_scatter if libata marks qc as NODATA
scsi: iscsi: Fix iSCSI cls conn state
|
|
Pull vmwgfx fixes from Dave Airlie:
"This contains two regression fixes for vmwgfx, one due to a refactor
which meant locks were being used before initialisation, and the other
in fixing up some warnings from the core when destroying pinned
buffers.
vmwgfx:
- fixed unpinning before destruction
- lockdep init reordering"
* tag 'drm-fixes-2021-04-18' of git://anongit.freedesktop.org/drm/drm:
drm/vmwgfx: Make sure bo's are unpinned before putting them back
drm/vmwgfx: Fix the lockdep breakage
drm/vmwgfx: Make sure we unpin no longer needed buffers
|
|
into drm-fixes
vmwgfx fixes for regressions in 5.12
Here's a set of 3 patches fixing ugly regressions
in the vmwgfx driver. We broke lock initialization
code and ended up using spinlocks before initialization
breaking lockdep.
Also there was a bit of a fallout from drm changes
which made the core validate that unreferenced buffers
have been unpinned. vmwgfx pinning code predates a lot
of the core drm and wasn't written to account for those
semantics. Fortunately changes required to fix it
are not too intrusive.
The changes have been validated by our internal ci.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f7add0a2-162e-3bd2-b1be-344a94f2acbf@vmware.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"One more driver bugfix for I2C"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mv64xxx: Fix random system lock caused by runtime PM
|
|
This does the directory entry name verification for the legacy
"fillonedir" (and compat) interface that goes all the way back to the
dark ages before we had a proper dirent, and the readdir() system call
returned just a single entry at a time.
Nobody should use this interface unless you still have binaries from
1991, but let's do it right.
This came up during discussions about unsafe_copy_to_user() and proper
checking of all the inputs to it, as the networking layer is looking to
use it in a few new places. So let's make sure the _old_ users do it
all right and proper, before we add new ones.
See also commit 8a23eb804ca4 ("Make filldir[64]() verify the directory
entry filename is valid") which did the proper modern interfaces that
people actually use. It had a note:
Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.
which this now corrects. Note that we really don't care about POSIX and
the presense of '/' in a directory entry, but verify_dirent_name() also
ends up doing the proper name length verification which is what the
input checking discussion was about.
[ Another option would be to remove the support for this particular very
old interface: any binaries that use it are likely a.out binaries, and
they will no longer run anyway since we removed a.out binftm support
in commit eac616557050 ("x86: Deprecate a.out support").
But I'm not sure which came first: getdents() or ELF support, so let's
pretend somebody might still have a working binary that uses the
legacy readdir() case.. ]
Link: https://lore.kernel.org/lkml/CAHk-=wjbvzCAhAtvG0d81W5o0-KT5PPTHhfJ5ieDFq+bGtgOYg@mail.gmail.com/
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.12-rc8, including fixes from netfilter, and
bpf. BPF verifier changes stand out, otherwise things have slowed
down.
Current release - regressions:
- gro: ensure frag0 meets IP header alignment
- Revert "net: stmmac: re-init rx buffers when mac resume back"
- ethernet: macb: fix the restore of cmp registers
Previous releases - regressions:
- ixgbe: Fix NULL pointer dereference in ethtool loopback test
- ixgbe: fix unbalanced device enable/disable in suspend/resume
- phy: marvell: fix detection of PHY on Topaz switches
- make tcp_allowed_congestion_control readonly in non-init netns
- xen-netback: Check for hotplug-status existence before watching
Previous releases - always broken:
- bpf: mitigate a speculative oob read of up to map value size by
tightening the masking window
- sctp: fix race condition in sctp_destroy_sock
- sit, ip6_tunnel: Unregister catch-all devices
- netfilter: nftables: clone set element expression template
- netfilter: flowtable: fix NAT IPv6 offload mangling
- net: geneve: check skb is large enough for IPv4/IPv6 header
- netlink: don't call ->netlink_bind with table lock held"
* tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
netlink: don't call ->netlink_bind with table lock held
MAINTAINERS: update my email
bpf: Update selftests to reflect new error states
bpf: Tighten speculative pointer arithmetic mask
bpf: Move sanitize_val_alu out of op switch
bpf: Refactor and streamline bounds check into helper
bpf: Improve verifier error messages for users
bpf: Rework ptr_limit into alu_limit and add common error path
bpf: Ensure off_reg has no mixed signed bounds for all types
bpf: Move off_reg into sanitize_ptr_alu
bpf: Use correct permission flag for mixed signed bounds arithmetic
ch_ktls: do not send snd_una update to TCB in middle
ch_ktls: tcb close causes tls connection failure
ch_ktls: fix device connection close
ch_ktls: Fix kernel panic
i40e: fix the panic when running bpf in xdpdrv mode
net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta
net/mlx5e: Fix setting of RS FEC mode
net/mlx5: Fix setting of devlink traps in switchdev mode
Revert "net: stmmac: re-init rx buffers when mac resume back"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"The largest change is for a regression that landed during -rc1 for
block-device read-only handling. Vaibhav found a new use for the
ability (originally introduced by virtio_pmem) to call back to the
platform to flush data, but also found an original bug in that
implementation. Lastly, Arnd cleans up some compile warnings in dax.
This has all appeared in -next with no reported issues.
Summary:
- Fix a regression of read-only handling in the pmem driver
- Fix a compile warning
- Fix support for platform cache flush commands on powerpc/papr"
* tag 'libnvdimm-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC
libnvdimm: Notify disk drivers to revalidate region read-only
dax: avoid -Wempty-body warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL memory class fixes from Dan Williams:
"A collection of fixes for the CXL memory class driver introduced in
this release cycle.
The driver was primarily developed on a work-in-progress QEMU
emulation of the interface and we have since found a couple places
where it hid spec compliance bugs in the driver, or had a spec
implementation bug itself.
The biggest change here is replacing a percpu_ref with an rwsem to
cleanup a couple bugs in the error unwind path during ioctl device
init. Lastly there were some minor cleanups to not export the
power-management sysfs-ABI for the ioctl device, use the proper sysfs
helper for emitting values, and prevent subtle bugs as new
administration commands are added to the supported list.
The bulk of it has appeared in -next save for the top commit which was
found today and validated on a fixed-up QEMU model.
Summary:
- Fix support for CXL memory devices with registers offset from the
BAR base.
- Fix the reporting of device capacity.
- Fix the driver commands list definition to be disconnected from the
UAPI command list.
- Replace percpu_ref with rwsem to fix initialization error path.
- Fix leaks in the driver initialization error path.
- Drop the power/ directory from CXL device sysfs.
- Use the recommended sysfs helper for attribute 'show'
implementations"
* tag 'cxl-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/mem: Fix memory device capacity probing
cxl/mem: Fix register block offset calculation
cxl/mem: Force array size of mem_commands[] to CXL_MEM_COMMAND_ID_MAX
cxl/mem: Disable cxl device power management
cxl/mem: Do not rely on device_add() side effects for dev_set_name() failures
cxl/mem: Fix synchronization mechanism for device removal vs ioctl operations
cxl/mem: Use sysfs_emit() for attribute show routines
|
|
Merge misc fixes from Andrew Morton:
"12 patches.
Subsystems affected by this patch series: mm (documentation, kasan,
and pagemap), csky, ia64, gcov, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
lib: remove "expecting prototype" kernel-doc warnings
gcov: clang: fix clang-11+ build
mm: ptdump: fix build failure
mm/mapping_dirty_helpers: guard hugepage pud's usage
ia64: tools: remove duplicate definition of ia64_mf() on ia64
ia64: tools: remove inclusion of ia64-specific version of errno.h header
ia64: fix discontig.c section mismatches
ia64: remove duplicate entries in generic_defconfig
csky: change a Kconfig symbol name to fix e1000 build error
kasan: remove redundant config option
kasan: fix hwasan build for gcc
mm: eliminate "expecting prototype" kernel-doc warnings
|
|
The return value on success (>= 0) is overwritten by the return value of
put_old_timex32(). That works correct in the fault case, but is wrong for
the success case where put_old_timex32() returns 0.
Just check the return value of put_old_timex32() and return -EFAULT in case
it is not zero.
[ tglx: Massage changelog ]
Fixes: 3a4d44b61625 ("ntp: Move adjtimex related compat syscalls to native counterparts")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210414030449.90692-1-chenjun102@huawei.com
|
